Database Develop

[Q] XPOSED modules not working on Lollipop

Hi,
I'm new to all customizations and things similar on Android. I have been using Xposed on Kitkat without any issues on my Nexus 4. I recently installed xposed alpha for lollipop (waited so long for that). However, not all modules recognize xposed framework. I have installed GravityBo[LP] and working perfectly fine, but there are modules like BootManager and XPrivacy which says that the module is not activated. Attached are the screenshots. Please advise.

sujeet.sinha said:
Hi,
I'm new to all customizations and things similar on Android. I have been using Xposed on Kitkat without any issues on my Nexus 4. I recently installed xposed alpha for lollipop (waited so long for that). However, not all modules recognize xposed framework. I have installed GravityBo[LP] and working perfectly fine, but there are modules like BootManager and XPrivacy which says that the module is not activated. Attached are the screenshots. Please advise.
Click to expand...
Click to collapse
chk this thread for working xposed modules -
http://forum.xda-developers.com/xposed/unofficial-list-modules-xposed-lollipop-t3030515
Also, Bootmanager seems to be working based on the feedback, chk pg 32 in the above thread.

shantu said:
chk this thread for working xposed modules -
http://forum.xda-developers.com/xposed/unofficial-list-modules-xposed-lollipop-t3030515
Also, Bootmanager seems to be working based on the feedback, chk pg 32 in the above thread.
Click to expand...
Click to collapse
I have seen that link. My bad I missed the fact that XPrivacy is not supported. However, I'm facing the same issue with BootManager.

sujeet.sinha said:
I have seen that link. My bad I missed the fact that XPrivacy is not supported. However, I'm facing the same issue with BootManager.
Click to expand...
Click to collapse
What happenes if you click ouside the error message, does it allow you to configure Boot Manager?
Edit - I just downloaded it on my Nexus 5 stock rom, and is working fine!

shantu said:
What happenes if you click ouside the error message, does it allow you to configure Boot Manager?
Edit - I just downloaded it on my Nexus 5 stock rom, and is working fine!
Click to expand...
Click to collapse
Yes. It does. But, will it actually work without the xposed framework?

Check, and if it doesnt, let the app owner of Bootmanager know

shantu said:
Check, and if it doesnt, let the app owner of Bootmanager know
Click to expand...
Click to collapse
This is fixed with BootManager 3.1.0

[DISCUSSION] Xposed for Android 5.1

You can use this thread for discussions. Please check the read-only thread for the download links and updates.

You've done the impossible! Thanks so much for all the work and sharing it!

Tried it on Euphoria 1.1 Beta 5.1, Bacon.
Glad to report it works, thank you sooo much :good:
Oneplus One.

Working well on the N6!
Proceed with caution guys! Already in bootloop city (totally prepared and exiting it now, expected as much) Just letting everyone know for those of you who are excited about this - this is NOT Xposed like you are used to, not yet as modules have not had any possible chance to catch up. If you are not ready for serious bootloops, stay away from this for now lol

wrongway213 said:
Working well on the N6!
Proceed with caution guys! Already in bootloop city (totally prepared and exiting it now, expected as much) Just letting everyone know for those of you who are excited about this - this is NOT Xposed like you are used to, not yet as modules have not had any possible chance to catch up. If you are not ready for serious bootloops, stay away from this for now lol
Click to expand...
Click to collapse
How is it working well and causing bootloops? That seems to be a bit contradictory.
Sent from my Nexus 6 using XDA Free mobile app

akellar said:
How is it working well and causing bootloops? That seems to be a bit contradictory.
Sent from my Nexus 6 using XDA Free mobile app
Click to expand...
Click to collapse
Framework isn't causing bootloops. but many modules it seems do as obviously none have updated to 5.1 given the nature of this release being super alpha as well as unofficial. The framework itself, the part romracer hs given us here, appears to be running well - just wanted to warn users who have been waiting (im)patiently on Xposed for 5.1 that you can't just jump back into modules.. bootloops on bootloops here experimenting

wrongway213 said:
Framework isn't causing bootloops. but many modules it seems do as obviously none have updated to 5.1 given the nature of this release being super alpha as well as unofficial. The framework itself, the part romracer hs given us here, appears to be running well - just wanted to warn users who have been waiting (im)patiently on Xposed for 5.1 that you can't just jump back into modules.. bootloops on bootloops here experimenting
Click to expand...
Click to collapse
Makes sense. Might help others if you mentioned the modules causing problems as well.
Sent from my Nexus 6 using XDA Free mobile app

akellar said:
Makes sense. Might help others if you mentioned the modules causing problems as well.
Sent from my Nexus 6 using XDA Free mobile app
Click to expand...
Click to collapse
I would specify but I've been bootlooping since this was released messing with File Manager in TWRP and then when I could get into boot looking at Xposed logs for fatal errors.. all I could see between bootloops is that Youtube AdAway causes fatal errors (not the one giving me bootloops though - I was able to uninistall before the bootlooping got to where I couldn't ever boot and had to restore). Also, I can confirm Always Correct! causes keyboard to FC non-stop and renders it unusable. I am not sure which module caused Play Store not to open and which caused bootloops, probably multiple. I thought I'd be able to spend more time booted and so I loaded a few modules after I took a backup and decided to mess with the Xposed logs and TWRP file manager like I mentioned, but bootloops were more than I anticipated so I just restored a backup and installed Framework for now.
Edit:Apparently 4/4 Banks gapps I updated with this cause Play Store FCs. My luck I'd upate extremely stable gapps, update SuperSU, backup, flash a super alpha and have issues with the gapps. Let's try this again...

Now it is time to test and embrace the bootloops!

Anyone found any modules working thus far, or will EVERYTHING need updaed to 5.1? I tried a module that still worked from KitKat when Xposed upgraded to Lollipop without upgrading bu it doesn't work now.. not sure what to make of that. Nothing else I've tried works either, but that not working (Always Correct!) seemed notable to me for that reason. Curious if anyone else is having any luck - no issues with framework I can see and logs appear to be running normally FWIW.

wrongway213 said:
Anyone found any modules working thus far, or will EVERYTHING need updaed to 5.1? I tried a module that still worked from KitKat when Xposed upgraded to Lollipop without upgrading bu it doesn't work now.. not sure what to make of that. Nothing else I've tried works either, but that not working (Always Correct!) seemed notable to me for that reason. Curious if anyone else is having any luck - no issues with framework I can see and logs appear to be running normally FWIW.
Click to expand...
Click to collapse
App settings; Lolistat; Youtube Adaway
work very well. I did not find others work yet.

When you flash the framework do the modules auto enable? I got a bootloop but I don't think its from the framework
Sent from my Nexus 5 using Tapatalk

iopxiang said:
App settings; Lolistat; Youtube Adaway
work very well. I did not find others work yet.
Click to expand...
Click to collapse
greenify doesn't work. Always takes a bit of time to work after an xposed release.

Nexus 5 with Cataclysm ROM and ElementalX kernel. SELinux is permissive. Getting bootloop. Modules enabled were Gravitybox, BootManager and MaxLock.

iopxiang said:
App settings; Lolistat; Youtube Adaway
work very well. I did not find others work yet.
Click to expand...
Click to collapse
Has YouTube AdAway been updated already somehow? It was the app giving me fatal errors in my logs earlier when I was getting bootloops and FCs. On Nexus 6 here, Benzo ROM Hydra Kernel

Great news.

@romracer
Thank you for Xposed for 5.1
Tested modules:
GravityBox LP - bootloop (bootloop solution, delete com.ceco.gravitybox folder from /data/app/ via TWRP)
Play Store Changelog - Play Store 5.4.10 FC's (delete app data does not help as on Android 5.0.2)
Xposed GEL Settings - bootloop (bootloop solution, delete de.theknut.xposedgelsettings folder from /data/app/ via TWRP)
BurnToast - OK
CrappaLinks - OK
Lolistat - OK

Does anyone know if Amplify module works? I won't be able to install the 5.1 xposed version, but I shall soon
btw @romracer, I believe you mentioned in the xposed github that you have a Moto X 2014. I do too, so I can presume that xposed will work on the device?

I had disabled all modules from the the Xposed Installer before flashing, yet for some reason when I flashed I got stuck in a bootloop caused by trying to load some long ago enabled modules.
I forgot to make a copy of the logs, so what I wanted to say is that you can delete/rename /data/data/de.robv.android.xposed.installer/conf/modules.list to get out of bootloops caused by modules.
Obviously, this won't help if the framework itself isn't compatible with your ROM/device.

Working:
- Lolistat
- OGXposed (To login with OGYouTube)
- Advanced Power Menu
- YouTube Adaway
- Crappalinks
- Burntoast
- Maxlock
- MinMinGuard
Not working:
- Xposed Gel Settings
- GravityBox
- Amplify
- AcDisplay
All i know for now.
Using Euphoria 5.1 OnePlus One.

Xposed Oreo

Hi guys,
Unlike on nougat, Xposed installs and works just fine on 8.1.
Install zip in twrp. It takes a while to reboot. Install apk, open app. It says not activated. Reboot.
Once done, you can download the modules. Granted only a few work, it's still better than nothing. I have greenify and double tap status bar to sleep working.
You can search Oreo in the download section for the mods that work on Oreo.
Waiting and hoping for gravity box Oreo.
Download arm64 zip and apk. Cheers.
https://www.xda-developers.com/xposed-framework-for-android-oreo-beta/

Anybody having issues with YouTube adaway on 8.1?

ccalixtro said:
Anybody having issues with YouTube adaway on 8.1?
Click to expand...
Click to collapse
Tried it today. YouTube fc unfortunately. Just uninstall the module. I've been using the arter97 youtube installer. An ad slips in once in a while. Just switch to another video and come back to it. Ad will be gone.

tropical cactus said:
Tried it today. YouTube fc unfortunately. Just uninstall the module. I've been using the arter97 youtube installer. An ad slips in once in a while. Just switch to another video and come back to it. Ad will be gone.
Click to expand...
Click to collapse
Use iytbp youtube magisk module....u will get no ads ...illl get it in black theme too

Hi all, I could not find any working xposed module other than greenify and arter97. can anybody post few good working modules?

maity-iman-2015 said:
Hi all, I could not find any working xposed module other than greenify and arter97. can anybody post few good working modules?
Click to expand...
Click to collapse
Have a look here.
https://forum.xda-developers.com/xposed/xposed-modules-oreo-t3732819

x
guys I own nexus 6p, have oreo 8.1 Jan security patches with xposed framework installed but immediately after installing xposed for oreo ,most apps start stopping,some google play services stopped working , I do cleared cache/ART through TWRP advanced wipe also cleared google play services cache and data right after 1st boot post xposed framework installation but still facing same issues.
I really like gravity box,Xinsta etc modules but cant use it now...please suggest and advise.
Thanks,
Sachin.

Just a quick update. Here are some modules working on our 6p 8.1. I especially like face unlock.

tropical cactus said:
I especially like face unlock.
Click to expand...
Click to collapse
Does it drain the battery much? I imagine it would.

burningcreation said:
Does it drain the battery much? I imagine it would.
Click to expand...
Click to collapse
Well, you need to wake your phone to activate it.

tropical cactus said:
Just a quick update. Here are some modules working on our 6p 8.1. I especially like face unlock.
Click to expand...
Click to collapse
Hi,
Does ScreenAnimation module working on you?
I tried, but it did not work on my phone.

sene1983 said:
Hi,
Does ScreenAnimation module working on you?
I tried, but it did not work on my phone.
Click to expand...
Click to collapse
Old module or the one developer is reviving? I have no idea about the revival one but old one working on my 6p. You could try the option in gravity box Oreo.

[Module][UPDATED] AirAudio System-Audio Mode

What's good everyone!
I use the AirAudio app and pretty much enjoy streaming my music from services (such as Spotify) to any capable device at home, work or at my friend's house.
Now the module itself hasn't been updated and isn't compatible with the latest version of Magisk (v16), so I went ahead and made it compatible with it.
It'll be attached to this thread, simply download and install it manually.
I'll also try and upload it to the repository.
Note:
I am NOT affiliated with AirAudio.
I'm simply a user like you. I just noticed it's outdated and updated it.
Note for Moderators:
In case the actual AirAudio dev reaches out to you, let me know and feel free to close this thread.
In the meantime, I'd like users to use my updated module to use their app to the full extent.
--
Credits:
AirAudio Devs - AirAudio ; Original Magisk Module
topjohnwu - Magisk, Magisk template
Me? - Update

I have installed it in LOS 15.1. How to use it? Can't see an UI?

I loved!

How do this compare to the air audio app on play store? I cannot find any app or setting to use this module after installing with magisk

karstensson said:
How do this compare to the air audio app on play store? I cannot find any app or setting to use this module after installing with magisk
Click to expand...
Click to collapse
you have to use both together. This module allows the app to use the "system mode" from the app and get the sound directly internally to send it over the wlan. The other mode from air audio is much worse as it is has to play the sound over the speaker and record it over the microphone.
For me this Magisk package is working wonderful: just installing this module. Afterwards the app from the Playstore and voila: I am able to play music from my phone to most every wifi-based receivers. The app is worth every cent!

works on s9/s9+?

speckdeckel said:
works on s9/s9+?
Click to expand...
Click to collapse
It should work with any phone regardless because it depends onAirAudio itself.

knojap said:
I have installed it in LOS 15.1. How to use it? Can't see an UI?
Click to expand...
Click to collapse
There's no UI to it, it just enables the system-mode in AirAudio, yoiu'll have to check the app to see the option.
This module basically re-enables it.

Not working for me
Hello
I have a oneplus 6 running magisk 17.1
The module does not work for me. Airaudio never requests root privileges, is that the problem

Nope, that's why you use this module!
In the AirAudio app > Settings > System Audio button must be green.
Sent with much love & Android. OnePlus 5T

v3 breaks the app. Only microphone mode available. Had to revert v2 to get back system mode. Running Magisk v16 and MM 5.8.3.

How do you downgrade I can't seem to find V2? Thanks

megatron_lives said:
How do you downgrade I can't seem to find V2? Thanks
Click to expand...
Click to collapse
Here we are:
https://drive.google.com/file/d/1bHZ9SnpwGXvUJBUpt73aD5Ps8AthErrI/view?usp=sharing

gkornaks said:
Here we are:
https://drive.google.com/file/d/1bHZ9SnpwGXvUJBUpt73aD5Ps8AthErrI/view?usp=sharing
Click to expand...
Click to collapse
Thank you very much. Where did you get this or do you have a backup?

megatron_lives said:
Thank you very much. Where did you get this or do you have a backup?
Click to expand...
Click to collapse
Got a backup.

gkornaks said:
v3 breaks the app. Only microphone mode available. Had to revert v2 to get back system mode. Running Magisk v16 and MM 5.8.3.
Click to expand...
Click to collapse
I have today the same experience with my oneplus 6 under Oreo. Uninstall v3 and install v2: everything works as expected again in system mode.

Hi everyone,
I am the developer of AirAudio & its Magisk-module.
I will update AirAudio's Magisk-module in the next hours.
Please, simply contact me (the devs in general) about such issues.. just writing here doesn't help the mass

funtax said:
Hi everyone,
I am the developer of AirAudio & its Magisk-module.
I will update AirAudio's Magisk-module in the next hours.
Please, simply contact me (the devs in general) about such issues.. just writing here doesn't help the mass
Click to expand...
Click to collapse
Thanks! Next time will do.
Can you let us know when it's updated and in the repo?

gkornaks said:
Thanks! Next time will do.
Can you let us know when it's updated and in the repo?
Click to expand...
Click to collapse
The module should already be up to date now but I can't check it right now because my current device isn't rooted.
One user is reporting it's still not working but this might be related to another issue with Magisk.
Please check if v4+ is available inside Magisk Manager and contact me at [email protected] if you face any issues

I have same issuewith v4: reverting to v2 works.

Comdirect photoTAN app detecting root

Since version 8.3.0 additional measures to detect root have been added, do not update as MagiskHide won't be able to prevent detection. Until a solution is found I would recommend staying on the previous version for as long as possible.
Finding out what exactly is causing the root detection is beyond my technical abilities but I would provide as much information needed to those willing to help.
---
Update: December 14th 2021 - Method no longer sufficient
---
The solution found by @pxrave appears to be working:
pxrave said:
Hey fellas I got it working and others apps detect magisk before.
Update to latest v23
Install modules riru and riru unshare
Remove data from tan app
Go to magisk hide and tick all process to hide included the isolated
Start the tan app and do the activation again.
Problem you need wait 2 days to activate because comdirect use new activation process for photo tan app.
Working fine all version 8.3
Click to expand...
Click to collapse
Link to the Riru Unshare module:
GitHub - vvb2060/riru-unshare
Contribute to vvb2060/riru-unshare development by creating an account on GitHub.
github.com

also stcpay yesterday is updated to 1.6 and started to detect my magisk canary (22105)

I can confirm what swour says.
on Android 9 and 11, my magisk root is recognized, magiskhide is active and the phototan app is added.

Yes this is a serious problem. I used xposed magisk and x privacy... Latest comdirect tan app detect all...

+1

+1 big issue for me

Only solution I found (for now): Go back to version 8.2.1 using a backup or any mirror, e.g. https://downloadapk.net/comdirect-photoTAN-App.html
Unfortunately you need to register again then

I have already applied the update. The easiest method is to wait few days for a magisk fix, right? I would can wait few days, no problem. I have an absolutly clean Android 8.1 build on the phone for banking. It's crazy that the bank is make it so difficult for us to use a save own build.

allrightlite said:
The easiest method is to wait few days for a magisk fix, right? I would can wait few days, no problem.
Click to expand...
Click to collapse
Perhaps that is too optimistic. I doubt that one app is of great interest

Asellus said:
one app is of great interest
Click to expand...
Click to collapse
Until the new root detection is also available for other apps, it will be fixed quickly.

Conan179 said:
Until the new root detection is also available for other apps, it will be fixed quickly.
Click to expand...
Click to collapse
Thanks, then I will easly wait. No need to reactivate hopefully.

Conan179 said:
Until the new root detection is also available for other apps, it will be fixed quickly.
Click to expand...
Click to collapse
Yes, of course, if other app developers find a similar way. So, congrats to the developers of the phototan app to find it.

Asellus said:
Yes, of course, if other app developers find a similar way. So, congrats to the developers of the phototan app to find it.
Click to expand...
Click to collapse
I don't think so, there is at least one other app that shows the same behavior.
new root dedction
i updated stc pay yesterday to 1.6 and it found my magisk canary (22105) the think i notes is the (isolated) is added to the app !!!
forum.xda-developers.com
I also noticed the (isolated) thing with me.

I tried with v23 this morning, w/o success :-(

Same here, got v23 and working safetynet-fix, no success. Downgraded photoTAN to v8.2.1 .

+1

I'm not surprised, there is nothing in the changelog that this has been fixed.

Downgrading to 8.2.0 or 8.2.1 doesn't work for me. Did you do something else than uninstalling 8.3.0 and installing 8.2.1?

muschi.muscholini said:
Downgrading to 8.2.0 or 8.2.1 doesn't work for me. Did you do something else than uninstalling 8.3.0 and installing 8.2.1?
Click to expand...
Click to collapse
I have a ZTE Blade L130 with the old photo tan app, that is my rescue. But you can't activate the old one. But it's keep working.

muschi.muscholini said:
Downgrading to 8.2.0 or 8.2.1 doesn't work for me. Did you do something else than uninstalling 8.3.0 and installing 8.2.1?
Click to expand...
Click to collapse
I had to unhide the app in magisk hide and hide it again, after that it worked.