System(MM) update problem. - Nexus 6 Q&A, Help & Troubleshooting

On 5.1.1 build LMY48T
When I received this phone on 16Nov I tried to let do the update to MM. It would D/L but fail in updating. (Just reboot after each try) I went ahead with 5.1.1 in unlocking and rooting with no problem. tried to allow it to update date again as it has been requesting and it now justs boots into TWRP. I wish to upgrade to MM but am stymied. Need Guru assistance.

First time around it might have been a corrupt download. Now it's because you're rooted and have TWRP installed. To be able to update through OTA your system needs to be fully stock.
To update now you need to flash a factory image (plenty of guides if you search). I recommend using fastboot, but you could also use a toolkit (Nexus Root Toolkit). If you don't want to wipe your phone, leave out the userdata image when flashing (or the "no wipe"-mode in NRT).

I did search but I have to admit I got alittle confused as there seemed to be different factory versions available. I did do updates to my Note 2 until they sneakily locked the bootloader on me (verizon Bastages) I will look at the guides more throughly now to educate myself better. Thank for the guidance.
Which one?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Either of them will work, bu to save you time, get the latest (MRA58R) because it's just going to prompt you to install those.

Following the advice my N6 is rocking MM and rooted. Thanks to all.

Awesome! Glad you got it working!

Related

[Q] Install OTA with rooted device.

I bought my HTC one a day ago, soon as I powered it up I rooted the device to use titanium backup properly.
After a few hours I realised that I was running 4.1.2 and there is a 4.2.2 out (I believe).
The OTA update didn't find anything. So here are my questions, assuming that the OTA update doesn't find anything because I unlocked the bootloader and rooted.
Is there anyway to update my phone to 4.2.2 or 4.2.1 without having to unroot, lock bootloader and wipe?
If not, will unlocking the bootloader again after OTA wipe the device the downgrade it to 4.1.2?
If yes, how? How can I update this device to the latest version?
I know I can install custom roms, but I actually like the default rom look and feel. But I want the latest version, since there are some nice changes in the latest versions.
Secondary question, when investigating this, my software versions below, match up with the following RUU:
RUU_M7_UL_JB_50_hTC_Asia_WWE_1.29.707.3_R_Radio_4A .14.3250.13_10.33.1150.01_release_311678_signed
But I bought my phone in the UK, Shouldn't it be the Europe version? I don't mind, since it's working. But it's just confusing me. I would have assumed it would be this version I require:
RUU_M7_UL_JB_50_HTC_Europe_1.28.401.7_Radio_4A.13. 3231.27_10.31.1131.05_release_310878_signed.
My current software:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Any advice on this is appreciate, since the phone is so new, I don't want to screw it up by flashing the wrong thing.
Sorry for asking a question which no doubt has been asked a million times.:crying:

4.4 Update doesn't want to install

Hello guys.
First of all, my friend is having HTC One bought in Ireland but the phone have HTC One GPe firmware flashed by him self.
Everything was working perfectly well till now when I cannot install 4.4 update. It did come up via OTA but he also tried installing it manually via TWRP.
When he tried doing it manually, the TWRP have error. I thought this might be error in package during downloading (Yes, happend few times with packages for Sony phone's) but even redownloading the file have same result.
You can see the error in screenshot.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
After failing updating via TWRP he waited for OTA. It come up today evening (27/11/2013) and everything would be fine but it also failed to install.
After OTA update downloaded the phone extract the system and then turn off and turn on entering recovery and nothing happened, He also couldn't turn on the phone.
He did even factory reset and now One doesn't show any update.
Do you have any idea how he can install it ? He's rooted, bootloader unlocked and he's on GPe 4.3 firmware.
Re-run 4.3 GPE RUU from Dev thread and wait for OTA, if you are S-OFF
that particular update you used must be flashed with the stock bootloader. get s-off with rumrunner (worked best for me) and flash back to stock, or any 4.4 rom of your choice

Problems install Hashcodes new 10.2 4.3.1 update to KF HD

Ok I attempted to flash the new Rom to his latest update. Would not boot up, pretty much stayed at the Cmod screen. Good news for me i had a older 4.2.2 rom on the unit still and was able to revert back to that.
I noticed that he said I should update TWRP. How in the world do I do that?
I have installed the file, but I can not figure out how to actually update to the latest TWRP. Some help would be greatly appreciated. Thanks
Flash the twrp file like if it was a rom and then reboot, thats it
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
For your own custom Sig : http://forum.xda-developers.com/showthread.php?t=1922304
goob982 said:
Ok I attempted to flash the new Rom to his latest update. Would not boot up, pretty much stayed at the Cmod screen. Good news for me i had a older 4.2.2 rom on the unit still and was able to revert back to that.
I noticed that he said I should update TWRP. How in the world do I do that?
I have installed the file, but I can not figure out how to actually update to the latest TWRP. Some help would be greatly appreciated. Thanks
Click to expand...
Click to collapse
Download the most recent TWRP from Hascodes thread as he modifies them so they work on our Kindle Fire HD's. http://forum.xda-developers.com/showthread.php?t=2128848 Then use your FireFlash app and flash TWRP in the recover.img just like the first time only don't tick or check any other boxes. It's easy as 1,2,3.

G925t locked by frp need help

hi
i am having issue with my galaxy s6 edge G925T phone was working properly battery got runt out so after when i charged and did power on after phone is not powering on and got bootloop
i found a post regarding this on xda forum followed that all method as they mentioned but unsuccessful
before i had the same model and got the same issue after when i flashed compatible kernel on g925t problem was sorted out , but with this phone same model when i flash kernel to get it out from boot loop then
the kernel doesn't get flashed and i get the following message as in the pictrue
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Same thing happened to me flashing a Tmobile rom. To prevent this you need to go through the setting and allow unlocked bootloaders (or something like that, currently flashing my phone to look it up) but this will prevent this lock from triggering. How I got past this? Odin'd back to stock and flashed everything again.
Bro phone doesn't go to main windows how I can go to setting it's only stuck on bootloop
Have you tried flashing the stock image in odin?
Stock rom from sammobile?
Yeah, you'll need to get familar with the hardware keys and how to boot into download mode with them. Typically I'd link you with instructions but I think googling it yourself will do you some good. Do some research and be sure to answer nicely to those who offer help.

From Bootloader - Android System Status: Custom

See pics. After unlocking I get a custom Android boot screen and the phone will not read any SIM. Appreciate if someone knows how to reverse this. Running Android 5.0 (can't root, install custom recovery, flash, or update from external storage).
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
WTH?
Did you unlock the bootloader?
toneay said:
Did you unlock the bootloader?
Click to expand...
Click to collapse
No. AT&T and Verizon lock the bootloader starting with Android 5. I did find that the baseband version is "unkown", which is why the radio is not working or reading a SIM. See picture.
Hmmm
So your ril got corrupted some how is what it looks like to me.
What is "ril" the acronym for?
In any event, where can I get a stock 5.0 or higher ROM that I can hopefully flash from my sd card. All I'm seeing is 4.4.2. Apparently, the AT&T updates are OTA.
Hmmm
I'm out of town right now and can't find one on xda. Try sammobile.com. Don't try ro flash it via sdcard. Odin or adb sideload would be the way to go. I would also suggest rebooting into the built in recovery and resetting it that way.
Thank you. for the suggestions. Before posting the original thread I tried a factory re-set (volume up + home + power), as well as Odin, and neither worked.
AT&T has the bootloader locked tight on Android 5.0 and above.
Yes
That is unfortunately true. Where did you buy the phone? And do you live in the states?
Use Triangle Away apk.
It's US stock, original AT&T device. Worked fine with the exception of poor battery life after the 5.0 OTA upgrade untilit was unlocked.

Categories

Resources