Database Develop

Xperia TX bricked (only showing sony logo then a triangle with an exclamation mark)

Please help me guys, I have no one else to turn to. My parents are gonna kill me if they find out what I did to my phone.
So my phone accidentally fell at school with the bluetooth still on.So I put the battery pack, power it on, but then it started to go on a boot loop i.e.
Sony logo-->Xperia Logo-->color animation-->black screen. But after 3-4 hours, it managed to do a complete boot! But I noticed that the bluetooth wasnt turning on. So stupid me, I restarted the device, then it started to go on a boot loop again. I got home and I tried it a couple of times more with the power and volume rocker combinations... didnt work either.
I even started using pc companion. didnt work (kept on doing the same thing
SUS --> same thing
NOW: I tried it using a different computer so I went to an internet shop and downloaded pcc and sus. I started pc companion... but halfway through the download... MY PHONE RAN OUT OF BATTERY and didnt finish the update. :'( Now, whenever I'm booting the phone, I only get the Sony logo and A TRIANGLE WITH AN EXCLAMATION MARK AND A PHONE UNDERNEATH.....
PLEASE HELP ME! My Phone is a Sony Xperia TX Lt29
Last Version before the crash: JB 4.1.2
No root (Noob here)
please... please. i dont know what to do. thank you in advance to anyone who can help me

calm down.
Charge the phone until it is fully charged.
Download PCCompanion and do a fresh install of it.
Run PCCompanion and choose software update.
Use the option to repair your phone, then follow the instructions.
Let us know how you get on
PS
This will only do a software repair, if something broke because you dropped it (Which it sounds like) you are going to have to come clean and tell your parents to get it fixed.

HI gregbradley '^^
gregbradley said:
calm down.
Charge the phone until it is fully charged.
Download PCCompanion and do a fresh install of it.
Run PCCompanion and choose software update.
Use the option to repair your phone, then follow the instructions.
Let us know how you get on
PS
This will only do a software repair, if something broke because you dropped it (Which it sounds like) you are going to have to come clean and tell your parents to get it fixed.
Click to expand...
Click to collapse
THANK YOU FOR YOUR REPLY!!! really thank you :'(
I already did something with the phone because I've been doing a lot of searching on the net lately...
I reinstalled the software using Sony Update Service (SUS) and it booted normally! (but sadly it was only during the FIRST BOOT UP) when I turned off the phone to re insert the sim card and micro sd, It started doing it again... but then, after 6 or 7 tries, it managed to skip past the sony logo-->xperia--> logo-->color animation? and do another complete boot
Now I decided to go to settings and do a complete factory reset cause I thought it would fix everything... but it didn't. It started doing the same thing, and I had to give it 10 or 12 tries before eventually booting up again. When it booted up normally, I was even able to play music with it and change the settings like brightness, volumes, equalizers, and even arrange widgets!
SITUATION NOW:I turn on the Wi-fi and it's in a boot loop again and I'm charging the phone up to 100%
(i did the vol.up vol down power combination before charging)
gregbradley, is it because of our slow internet connection??? (it took me like 4 nerve racking hours to finish the update) but sus was able to complete the download and install the software... what the f*ck is wrong with my phone (((( ohgod

AND:
I'll follow your instructions when the charge is complete...... and I'll be back to you with the results.God I hope this works.Thank you again.

Have you tried only partially flashing part of an ftf file. I know when my phone was on the brink of death I discovered that if I only flashed part of an ftf using flashtool that it would work. I think I would check everything that has exclude (ie: Exclude System) and it would work for me. Its not the end of the world though as the phone does work. Just a bootloop. If you can get it into flash mode then just exclude everything except System, Kernel, and baseband if I'm not mistaken.

hi Cammarratta '^^
Cammarratta said:
Have you tried only partially flashing part of an ftf file. I know when my phone was on the brink of death I discovered that if I only flashed part of an ftf using flashtool that it would work. I think I would check everything that has exclude (ie: Exclude System) and it would work for me. Its not the end of the world though as the phone does work. Just a bootloop. If you can get it into flash mode then just exclude everything except System, Kernel, and baseband if I'm not mistaken.
Click to expand...
Click to collapse
Thank you for the reply man '^^
um... to tell you the truth, I have no idea how to partially flash a tft file, let alone flashing. O_O (see how noob i am?) its saddening. So am I in the point right now where my phone's problem is unsolvable via pc companion or sony update service??? Plus I've been doing some searching here on xda and I saw this thread about xperia TX users updating to version b 167 and that their bootloaders are now locked.
This is what my phone is exactly doing whenever I try to boot it up:
Sony Logo---->Xperia Logo----> Color waves animation?---> FREEZE-->black screen then the Sony Logo again.
Whenever I try to boot up for the 2nd time this happens:
Sony Logo----> Black Screen---> Phone turns off---> Sony Logo again
(((

You have flashtool yes? If you load up like you're going to flash a ftf file. Once you click to load up the ftf file it'll pull a menu where you pick what you want to flash. On the right side of flashtool that's where the exclude part is. That's where you have to check the *exclude option. The same thing happened to me when I accidentally flashed a T cm10 rom on my phone. I had to partially flash a ftf file to get it to boot. It should work but since you're not familiar with flashtool its going to make it a bit harder for you in the end. :/

carloptimus3d said:
Please help me guys, I have no one else to turn to. My parents are gonna kill me if they find out what I did to my phone.
So my phone accidentally fell at school with the bluetooth still on.So I put the battery pack, power it on, but then it started to go on a boot loop i.e.
Sony logo-->Xperia Logo-->color animation-->black screen. But after 3-4 hours, it managed to do a complete boot! But I noticed that the bluetooth wasnt turning on. So stupid me, I restarted the device, then it started to go on a boot loop again. I got home and I tried it a couple of times more with the power and volume rocker combinations... didnt work either.
I even started using pc companion. didnt work (kept on doing the same thing
SUS --> same thing
NOW: I tried it using a different computer so I went to an internet shop and downloaded pcc and sus. I started pc companion... but halfway through the download... MY PHONE RAN OUT OF BATTERY and didnt finish the update. :'( Now, whenever I'm booting the phone, I only get the Sony logo and A TRIANGLE WITH AN EXCLAMATION MARK AND A PHONE UNDERNEATH.....
PLEASE HELP ME! My Phone is a Sony Xperia TX Lt29
Last Version before the crash: JB 4.1.2
No root (Noob here)
please... please. i dont know what to do. thank you in advance to anyone who can help me
Click to expand...
Click to collapse
just let it plug in with the charger and keep your phone on for day, usually that will fix it after a few hours with that logo running

Use a battery charger, charge for at least half the entire batt and then follow the thread on flashing, download some files while charging to minimize downtime
Sent from my LT29i using xda premium

Hey guys...... ))))
First and foremost, thank you for all your replies.. really helped me a lot (
It's okay now guys! '^^ I re installed the software via Sony Update Service and it worked. At first I thought the phone was a goner cause it didn't manage to do a complete boot right after the installation. (Phone was stuck on the Sony Logo) But then the next morning, I tried it again and it worked!!
BUT: What I fear now is that the phone might suddenly crash again if I turn on the WI-FI (just like what happened in my previous attempts) If the phone crashes, I fear that the phone would start going on a boot loop again.So basically, I'm just using the phone for media purposes only i.e. Walkman, Gallery,Camera, Movies.
Any thoughts on this, cool, awesome people of xda? '^^ (cant update my apps and google now f*ck)
just.. sad. I miss Flipboard,Modern Combat 4, My Daddy Was a Thief, Real Racing 3, DEAD SPACE (((

one question...
Did something broke inside my phone when it fell?? If yes... WHAT EXACTLY IS IT?? why is it behaving this way??? Why does it keep on boot looping??? should I go and let an expert open it????

carloptimus3d said:
First and foremost, thank you for all your replies.. really helped me a lot (
It's okay now guys! '^^ I re installed the software via Sony Update Service and it worked. At first I thought the phone was a goner cause it didn't manage to do a complete boot right after the installation. (Phone was stuck on the Sony Logo) But then the next morning, I tried it again and it worked!!
BUT: What I fear now is that the phone might suddenly crash again if I turn on the WI-FI (just like what happened in my previous attempts) If the phone crashes, I fear that the phone would start going on a boot loop again.So basically, I'm just using the phone for media purposes only i.e. Walkman, Gallery,Camera, Movies.
Any thoughts on this, cool, awesome people of xda? '^^ (cant update my apps and google now f*ck)
just.. sad. I miss Flipboard,Modern Combat 4, My Daddy Was a Thief, Real Racing 3, DEAD SPACE (((
Click to expand...
Click to collapse
If it's only when you start the wifi it's an hardware problem.
Send it to service

hello
Cammarratta said:
You have flashtool yes? If you load up like you're going to flash a ftf file. Once you click to load up the ftf file it'll pull a menu where you pick what you want to flash. On the right side of flashtool that's where the exclude part is. That's where you have to check the *exclude option. The same thing happened to me when I accidentally flashed a T cm10 rom on my phone. I had to partially flash a ftf file to get it to boot. It should work but since you're not familiar with flashtool its going to make it a bit harder for you in the end. :/
Click to expand...
Click to collapse
What version for ftf version for xperia tx should i flash???? the ics one??? the latest??? helppp
and should i check everything that's in the exclude option?

The latest one, and don't exclude anything
Sent whilst sat on the toilet.

I Bricked my Sony Xperia TL(LT30at) PLEASE HELP!!!

Im very new at rooting and messed up. Will someone dedicate some time to helping me fix my phone im willing to donate money to get my phone fixed. I used flashtool to flash a FTF and when it was done it told me to unplug and power on my device. I unpluged it and that was the last time i saw the led on and now its unresposive to anything i do. when i plug it into my computer i hear the little sound it make when it connects but after the sound nothing not even my computer does anything. im willing to give a senior member remote access and walk step by step through chat or another phone to solve this. please help even if its to just get me back to stock firmware. i would love to have Cynagen but will take anything at this moment. Please help.

Repair your phone using pccompanion
Sent whilst sat on the toilet.

I have tried and with no luck. Can you tell me the right way or link me to a thread to do this. my phone isnt reconized by pc companion

can you send me the link to the ftf that you flashed?

i can send you the file if you want.

just the link to the file so I know which one it is

http://androxyde.github.io/LT30p_9.1.A.1.141_Customized_FR.ftf.torrent

itsbrantar said:
http://androxyde.github.io/LT30p_9.1.A.1.141_Customized_FR.ftf.torrent
Click to expand...
Click to collapse
Try this one. It's the ftf for the xperia tl. the one you linked is for the t (although I'm not fully sure that it would matter). Also make sure you charge your phone for an hour or two to make sure it has enough power to finish the flashing process
http://forum.xda-developers.com/showpost.php?p=39307355&postcount=1

how do i get flashtools to reconize my phone when i plug it in the only thing my computer does is pop up a new window that say i need to install the qhsusb_dload.

itsbrantar said:
how do i get flashtools to reconize my phone when i plug it in the only thing my computer does is pop up a new window that say i need to install the qhsusb_dload.
Click to expand...
Click to collapse
Make sure the phone isn't plugged in to the PC yet.
In the Development forum, there is an updated version of Flashtool (v0.9.11.0). Are you using that? If not, maybe uninstall your old one and use this one.
After you install Flashtool (I recommend installing it to a simple path like C:\temp\Flashtool), navigate to the folder where it is installed. There is a folder in there called Drivers. Run the EXE file in there. It will offer to install a driver for your phone, and also 2 other drivers you will need (Flashmode driver and Fastboot driver). Check all 3 of those and do the install. Once those drivers are installed, Flashtool should be able to recognize your phone when it is in Flashmode.
*Note that if you're running Windows 8, it may get *****y and tell you that the drivers were not installed (and it won't say specifically why). The reason, I believe is because the drivers are "unverified" or "unsigned".
To turn this Win8 feature off, go to the bottom-right corner of your screen to get that stupid bar to appear. Click Settings. Then at the very bottom, choose "Change PC Settings". Then go to General. Then scroll it down to the bottom (Advanced start-up). This will require a restart to show you the options. Do that and you will see "Troubleshoot". Click it. Then "Advanced Options". Then "start-up settings". Then hit the Restart button (again... I know.) When you see the Startup Settings screen, you'll see option 7 is to disable the driver signature enforcement. Hit F7 to do it. Then it will boot into Win8. Then you can run the Flashtool Drivers install to install your 3 drivers (xperia model+the flashmode+ the fastboot driver). You will notice that it will ask you a few times if you're sure you want to install the unsigned drivers. Say yes to all. Once it's all done, you can restart the machine and carry on with your flashtool flashing.

how do i get my phone into flashmode? i have a Sony Xperia TL (LT30at) and it does nothing when i push buttons.

Please read post 2 and 3 of the very first thread uh this section
Sent from my LT30p using xda premium

itsbrantar said:
http://androxyde.github.io/LT30p_9.1.A.1.141_Customized_FR.ftf.torrent
Click to expand...
Click to collapse
this is Lt30p!!It's for XPERIA T no TL You Sould flashed Lt30a Roms
plug your phone to Charger for 4/5 Hour then flash an Lt30a Rom
this may work

Here's an example of an FTF that is Xperia TL specific: (LT30at_9.1.F.1.120_ATT.zip). Found it via google. It is available at: http://d-h.st/TlU
To clarify the models mentioned, here is what I have been able to gather quickly (Please correct me if anything below is wrong or missing):
LT30at = the Xperia TL (which is the Xperia T, branded as AT&T, I believe)
LT30a = the Xperia T (the Canadian version T? This is my phone. I have flashed many LT30p FTF's on it successfully using the standard Flashtool procedure.)
LT30p = the Xperia T (for the rest of US carriers? and rest of the world?)

[Q] Help please Sony xperia z Font installer wont start

Hello, i have an xperia z c6606 rooted 10.3.1.E.0.191 firmware 4.2.2 jellybean and my company is tmobile.
its the water resistant xperia phone so i cannot open the phone, its just abunch of slots on the sides. i dont have a micro sd card but it supports it (if a sd card can help my problem) o and my bootloader is locked
so thats all the information i know about the phone. heres my problem.
i used the "Font Installer ★ Root ★" application from the google play store.
i tried to install dark wedding font and it asked me to restart. after i did i just get the loop reboot where it shows the sony logo then xperia logo then redoes the boot again. im pretty sure it ruined my font folder and made it so i cant start but im not sure on what to do to try to fix it. im new to android and used the kingo one click root so i dont have exact insider knowledge on what to do.
i searched google for answer but either they are outdated (links dont work) or they mention other things in which i cannot figure out what to do.
i have a flash tool from d-h.st/Kb8 (thats a url)
and downloaded a stock rom from forum.xda-developers.com/showthread.php?t=2511188
the rom is a ftf file and i have no clue what to do with it :3
If anyone could help it will be much appreciated.
(my computer runs ubuntu 12.4/windows 8 incase my computer is needed)
p.s. yes flashtool and rom is on my computer. blah

i just half ashed what i was doing a yolo'ed it and used the flash tool and tried to flash the rom onto my phone while in flash mode. it put the rom on and removed all my stuff which i dont mind. i just have to make sure my phone is fully functional. if not. ill edit this post.
Yup all fixed. sorry for wasting room on the forum. i really was lost. but i yolo'ed and BOOM yolo is the key to all lifes problems.

Wrong soft according to IMEI

Hey there i just noticed few things so just to make it clear igot Z from trade S3 for Z i dont have waranty all i have is a box phone and Swedish manuals. Im a bit confused cause box says its C6603 and bottom of the phone says the same C6603 after pressing *#06# imei shows the same as on the box from C6603 but when i go to settings and check device info it says C6602 http://zapodaj.net/bc7beb6231a48.png.html ill upload 2 images to let you guys check whats wrong. http://zapodaj.net/b8d6cd6d7be46.png.html
What makes me wonder how the hell I have C6602 fw in C6603? Any solutions? My phone so far stuck on 4.1.2 can't even update via OTA cause it says my phone got all updates so should I somehow install a proper soft with latest update 4.4 to C6603 or C6602? Im confused since I haven't got those kind of problems with any of my phones.

Djor said:
Hey there i just noticed few things so just to make it clear igot Z from trade S3 for Z i dont have waranty all i have is a box phone and Swedish manuals. Im a bit confused cause box says its C6603 and bottom of the phone says the same C6603 after pressing *#06# imei shows the same as on the box from C6603 but when i go to settings and check device info it says C6602 http://zapodaj.net/bc7beb6231a48.png.html ill upload 2 images to let you guys check whats wrong. http://zapodaj.net/b8d6cd6d7be46.png.html
What makes me wonder how the hell I have C6602 fw in C6603? Any solutions? My phone so far stuck on 4.1.2 can't even update via OTA cause it says my phone got all updates so should I somehow install a proper soft with latest update 4.4 to C6603 or C6602? Im confused since I haven't got those kind of problems with any of my phones.
Click to expand...
Click to collapse
Okay, the reason might be the person who sold you the phone flashed C6602 firmware on the device.
Flash C6603 firmware and everything should be fine

But how come is it possible to flash,different FW on model which shouldnt support it? Im scared dun wanna brick my precious Z
Could you lend me a hand how to do that im completly blonde in that.

Djor said:
But how come is it possible to flash,different FW on model which shouldnt support it? Im scared dun wanna brick my precious Z
Could you lend me a hand how to do that im completly blonde in that.
Click to expand...
Click to collapse
Bro 6602 firmware can be flashed on 6603 as hardware is nearly identical.
Now to rectify the problem follow the below instructions .
You can download kitkat stock firmware for 6603 from here
Download flashtool to flash firmware from here
How to flash instructions are given below
Download and install the Flashtool
Next go to where you installed flashtool folder in C drive and then to the drivers folder.
Run the Flashtool-drivers.exe file.
Xperia Z drivers, flashmode drivers and fastboot drivers.
Accept all the prompts and once finished load flashtool
Click the thunder button on top left
Now select flashmode
Select the firmware you want to flash
Turn off phone(Hold power and both the volume keys till you feel 3 vibrations)
When it tells you to connect hold down the volume button and connect usb to phone
Flashing will start
After flashing is complete boot the phone
Let me know if help is required dont worry it will not brick your device i had used the same method to update to kitkat
Edit : Keep the firmware ie the ftf file in the firmware folder of flashtool

androidtweaker1 said:
Bro 6602 firmware can be flashed on 6603 as hardware is nearly identical.
Now to rectify the problem follow the below instructions .
You can download kitkat stock firmware for 6603 from here
Download flashtool to flash firmware from here
How to flash instructions are given below
Download and install the Flashtool
Next go to where you installed flashtool folder in C drive and then to the drivers folder.
Run the Flashtool-drivers.exe file.
Xperia Z drivers, flashmode drivers and fastboot drivers.
Accept all the prompts and once finished load flashtool
Click the thunder button on top left
Now select flashmode
Select the firmware you want to flash
Turn off phone(Hold power and both the volume keys till you feel 3 vibrations)
When it tells you to connect hold down the volume button and connect usb to phone
Flashing will start
After flashing is complete boot the phone
Let me know if help is required dont worry it will not brick your device i had used the same method to update to kitkat
Edit : Keep the firmware ie the ftf file in the firmware folder of flashtool
Click to expand...
Click to collapse
Thanks babe ill try that in next days and post it if i suceed ;*

Djor said:
Thanks babe ill try that in next days and post it if i suceed ;*
Click to expand...
Click to collapse
:good::fingers-crossed::highfive: I am a guy BTW so calling babe is out of place

Im a girl btw so calling you babe is on a right place
Mwah!

Djor said:
Im a girl btw so calling you babe is on a right place
Mwah!
Click to expand...
Click to collapse
:good::highfive:

Hi! Im gonna flash my phone in few hours but im wondering do i need root for that cause i don't have it and i don't know how to root it ~.~ if needed

Djor said:
Hi! Im gonna flash my phone in few hours but im wondering do i need root for that cause i don't have it and i don't know how to root it ~.~ if needed
Click to expand...
Click to collapse
You wont need to root for flashing :good: don't worry go ahead and happy flashing
PS: Take a data backup as clean flash will wipe all data

I changed my config number to get generic US FW because my phone was running indian FW. Basically if you root, you can modify some text in a configuration file and trick the phone into thinking it's a model that it really isn't. More info here:http://forum.xda-developers.com/xperia-z/help/how-to-change-si-sony-xperia-z-t2271530
Root is also super easy - Google towel root, it is a recently discovered exploit that allows for one click rooting more or less.

Question... my phone vibrated 3 times and nothing -.- when i plug it to usb it's just charging :/

i don't get it... i got the window saying
Unplug device (done)
Power off (done)
Press the back button? (undone) since i don't have back button beside that one on the screen so im stuck here-.-

Djor said:
Question... my phone vibrated 3 times and nothing -.- when i plug it to usb it's just charging :/
Click to expand...
Click to collapse
Hold volume down key and connect usb to get in to flashmode :good:

omfg sorry im blonde mayby thats why ill try now .:victory:

http://zapodaj.net/bdfd75985c98e.jpg.html thats what happen :/ and i installed (ALL) drivers

http://zapodaj.net/6cacd3d6c4e36.jpg.html while flashing on 10% i get disconnect and now can't turn my phone on cause it says something about software omg what can i do....broked my phone

Djor said:
http://zapodaj.net/6cacd3d6c4e36.jpg.html while flashing on 10% i get disconnect and now can't turn my phone on cause it says something about software omg what can i do....broked my phone
Click to expand...
Click to collapse
Have Inboxed you pls check

[SOLVED] Unbrick c5303 possible?

Hey Folks,
Yesterday I came accross a new firmware for my C5303 (Stock) Rom. Problem was, something went fishy on my computer and the upgrade process went south midways.
Probelm being: I have neither rooted, nor unlocked the bootloader.
Is there a way to unbrick? Unfortunatelly I have learned, that appart from other SONY devices, the SP is not so peachy when it comes to custom roms.
Current state:
The device is not recogniced by the flash tool of Sony, or the suite.
Could someone point fingers where to look for a solution?

You will have to flash an FTF file using "flashtool".
A search on this forum will surely point you in the right direction.
There are already plenty of guides.
Good luck!

kevke said:
Hey Folks,
Yesterday I came accross a new firmware for my C5303 (Stock) Rom. Problem was, something went fishy on my computer and the upgrade process went south midways.
Probelm being: I have neither rooted, nor unlocked the bootloader.
Is there a way to unbrick? Unfortunatelly I have learned, that appart from other SONY devices, the SP is not so peachy when it comes to custom roms.
Current state:
The device is not recogniced by the flash tool of Sony, or the suite.
Could someone point fingers where to look for a solution?
Click to expand...
Click to collapse
I bricked mine yesterday at 11 pm,couldnt sleep right cause of the panic. xD
My C5303 has a LOCKED BOOTLOADER too,and I was stuck at the SONY logo.
I downloaded Flashtool.
I installed Flashtool.
This procedure is neccessary in order to install fastboot/flashmode/adb drivers.If you already did it,skip it.
If ur on windows 8,move ur mouse coursor to top right of the screen,a toolbar will appear.
Then click SETTINGS.Then click CHANGE PC SETTINGS.When it opens,select UPDATE & RECOVERY.Select RECOVERY.Select ADVANCED STARTUP.When it reboots,you will see a blue background and an option,i think it is TROUBLESHOOT,anyways,look for DISABLE DRIVER SIGNATURE VERIFICATION.But as I remember,i was put with a choice of selecting a number,and i pressed 7-DISABLE DRIVER VERIFICATION.
The PC will boot like nothing is changed,but now u can install the drivers.
Go to Flashtool/drivers and open the installation program
Select "Flashmode drivers","fastboot drivers" and "common drivers for Viskan board(these are the ADB drivers ONLY for the Xperia SP)"
The PC will ask you to allow the driver installation,allow all of them.Reboot ur pc again,and connect ur phone in flashmode for the pc to link the flashmode drivers to ur Xperia SP,then u can begin.
Download this firmware FROM THIS LINK
http://www.xperiadownload.cz/phocadownload/userupload/download/2013/SP/C5303_12.1.A.1.205_CE.rar
extract the ftf file with any rar program,then move the .ftf file to the FIRMWARE folder in the directory where flashtool is installed,mine is C:/Flashtool.move the .ftf file into (DRIVE):/Flashtool/firmwares
Open Flashtool,select Flash with Flashmode,wait for the program to say that u can connect ur xperia sp with the PC.To enter Flashmode hold the Volume DOWN button while connecting the phone to the PC.
I reccommend using the SONY cable,as i have a feeling it is the best one for these things.
Let Fashtool flash everything,do not touch the device at all until the Flashtool allows you to do so.

Here mate
http://forum.xda-developers.com/xperia-sp/general/root-ultimate-noobs-guide-to-rooting-t2845520

Thanks for all the answers so far...
I figured, taht in the flashtool the firmware for the device is not listet, although it is in the respektive directory. am I blind, or am I missing something?
It however does offer a X10 installation, what ever that is, when it is at home

Look for an FTF file on this forum.
Make sure you download and flash the correct one!

kevke said:
Thanks for all the answers so far...
I figured, taht in the flashtool the firmware for the device is not listet, although it is in the respektive directory. am I blind, or am I missing something?
It however does offer a X10 installation, what ever that is, when it is at home
Click to expand...
Click to collapse
I have found this source: http://xperiafirmware.com/8-firmware/37-sony-xperia-sp-c5303
It is recognised by the flash tool and therefore, I believe it works well... I'll keep you folks postet... FINGERS CROSSED

Okay folks, you can uncross your fingers... Thanks to all of you, the call is back to life!