Code:
#include
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
When coming from any other ROM, you must do a factory reset / clean flash.
The first boot can take a very long time. Don't assume that it is a bad flash, boot loop, etc. until it has sat for at least 5 minutes.
Links
ROM: http://download.cyanogenmod.org/?device=victara
Changelog: http://www.cmxlog.com/13/victara
GAPPS: I don't what is the best one yet, but I am personally using Slim mini. OpenGapps are also recommended often.
PROTIP: Be sure to flash gapps at the same time you flash the rom. If you boot into cm-13.0 without gapps and attempt to flash them later, you're going to have a bad time
Sensors / Ambient Display
If you have "Ambient Display" enabled in Settings >> Display then:
* the stow sensor and flat up sensor will pulse the display when the phone is picked up
* the IR sensors will pulse the display when you wave your hand over the phone
By default the "doorknob" gesture will launch the camera and the chop-chop gesture will toggle the torch.
Finally, when there is an incoming call, waving your hand over the phone will silence the ringer.
If you want to change the behaviour of these various gestures, go to Settings >> Gestures and you can change all of those options.
Known Issues
* TBD
Other Issues?
Before posting on this thread, make sure of a few things:
You've utilized the search function of the forums. Nothing irritates me more than lazy people who do not search for an answer before asking.
If you are the only one having a problem. Boot into recovery, wipe data/factory reset, reflash the rom/gapps and nothing else. Boot up and see if the problem persists.
Make sure your post is relevant to this thread. "I'm having problems rooting/unlocking" is NOT relevant here.
LOGS LOGS LOGS!!!! Use this: SysLog by Tortel
XDA:DevDB Information
Official CM-13.0 nightly releases, ROM for the Moto X 2014
Contributors
crpalmer, invisiblek
ROM OS Version: 6.0.x Marshmallow
Version Information
Status: Nightly
Created 2015-11-24
Last Updated 2015-11-25
Reserved
Nice !
BEST ANDROID, only facebook & messenger cashes but i found some apks working fine now i guess can't update thm
Thanks a lot!
---------- Post added at 09:40 PM ---------- Previous post was at 09:39 PM ----------
Snapchat and Facebook force closing here
kasrawis said:
BEST ANDROID, only facebook & messenger cashes but i found some apks working fine now i guess can't update thm
Click to expand...
Click to collapse
these should be fixed in the next nightly (assuming i get the patch finished in time, worst case scenario the one after that)
kasrawis said:
BEST ANDROID, only facebook & messenger cashes but i found some apks working fine now i guess can't update thm
Click to expand...
Click to collapse
In other forums, I saw that it can be operated as follows:
Using Root Explorer, find and delete the "libsslx.so" /data/app/com.facebook.orca-1/lib/arm file directory
In my case, it works.
The problem is that I do this, every time you restart the phone
Excuse me for my bad english. Or at least, forgive the translator of Google.
Is root finally working or still broken???
gianboy said:
Is root finally working or still broken???
Click to expand...
Click to collapse
Root works for root apps but does not allow to make changes on /system
Sent from my XT1092 using Tapatalk
invisiblek said:
these should be fixed in the next nightly (assuming i get the patch finished in time, worst case scenario the one after that)
Click to expand...
Click to collapse
Great! So Snapchat should also work with the patch? It force closes every time on cm13.
Sent from my Moto X
Google Camera FC when trying to launch video recorder.
Snapchat and facebook are working on the 11/25 build, Google camera from play store is working to. Thanks!
crpalmer said:
Code:
#include
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
When coming from any other ROM, you must do a factory reset / clean flash.
The first boot can take a very long time. Don't assume that it is a bad flash, boot loop, etc. until it has sat for at least 5 minutes.
Links
ROM: http://download.cyanogenmod.org/?device=victara
Changelog: http://www.cmxlog.com/13/victara
GAPPS: I don't what is the best one yet, but I am personally using Slim mini.
Sensors / Ambient Display
If you have "Ambient Display" enabled in Settings >> Display then:
* the stow sensor and flat up sensor will pulse the display when the phone is picked up
* the IR sensors will pulse the display when you wave your hand over the phone
By default the "doorknob" gesture will launch the camera and the chop-chop gesture will toggle the torch.
Finally, when there is an incoming call, waving your hand over the phone will silence the ringer.
If you want to change the behaviour of these various gestures, go to Settings >> Gestures and you can change all of those options.
Known Issues
* TBD
Other Issues?
Before posting on this thread, make sure of a few things:
You've utilized the search function of the forums. Nothing irritates me more than lazy people who do not search for an answer before asking.
If you are the only one having a problem. Boot into recovery, wipe data/factory reset, reflash the rom/gapps and nothing else. Boot up and see if the problem persists.
Make sure your post is relevant to this thread. "I'm having problems rooting/unlocking" is NOT relevant here.
LOGS LOGS LOGS!!!! Use this: SysLog by Tortel
XDA:DevDB Information
Official CM-13.0 nightly releases, ROM for the Moto X 2014
Contributors
crpalmer, invisiblek
ROM OS Version: 6.0.x Marshmallow
Version Information
Status: Nightly
Created 2015-11-24
Last Updated 2015-11-24
Click to expand...
Click to collapse
gapps ???
http://opengapps.org/?api=6.0&variant=nano
I can't seem to enter recovery since I've installed cm13 (yesterday's build). I'm trying to instal today's build but I'm unable to because I can't enter recovery mode. Initially I was using TWRP, then I installed CM's recovery, but that didn't work either.
Any thoughts?
felipevsw said:
I can't seem to enter recovery since I've installed cm13 (yesterday's build). I'm trying to instal today's build but I'm unable to because I can't enter recovery mode. Initially I was using TWRP, then I installed CM's recovery, but that didn't work either.
Any thoughts?
Click to expand...
Click to collapse
i had the same problem, the only solution was to flash the stock rom back, let it boot once and than reflash twrp.
That's exactly what I was going to try now.
uluf said:
i had the same problem, the only solution was to flash the stock rom back, let it boot once and than reflash twrp.
Click to expand...
Click to collapse
felipevsw said:
That's exactly what I was going to try now.
Click to expand...
Click to collapse
felipevsw said:
I can't seem to enter recovery since I've installed cm13 (yesterday's build). I'm trying to instal today's build but I'm unable to because I can't enter recovery mode. Initially I was using TWRP, then I installed CM's recovery, but that didn't work either.
Any thoughts?
Click to expand...
Click to collapse
I was able to get in with this recovery: http://forum.xda-developers.com/showpost.php?p=61558425&postcount=222
Side note - does anyone else get these weird artifacts in the nav keys area when in landscape mode in certain apps? It's duplicated my bluetooth icon here but it has done all sorts of weird corruption other times...
surrealjam said:
Side note - does anyone else get these weird artifacts in the nav keys area when in landscape mode in certain apps? It's duplicated my bluetooth icon here but it has done all sorts of weird corruption other times...
Click to expand...
Click to collapse
+1
Camera Bug
@crpalmer, @invisiblek: came accross a bug... Took a snap with Google Camera successfully once. Second time I try, the image freezes when I click the shoot button. I can interact with the camera app in some ways, like the swipe-from-left for options, and I can interact with the navbar, status bar, etc. But the image remains frozen, it isn't saved, and I can't proceed to click another pic until I restart the phone. Log attached; verbose; from CMAction to bring up camera, to close of camera.
Related
First things first:
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
The team:
We are a team, for more informations check this link: click thinghy
Because I own the device, I will manage this thread.
About the ROM:
General Features
Stock 4.4.4
Camera (photo and video) works. NFC (probably).
No bugs, everything works. (hopefully). ---- Look here.
Thats it.
Installation guide:
Copy ROM and gapps to sdcard
Flash ROM
Flash Gapps
Reboot and enjoy.
Credits to:
@broodplank1337
Downloads:
AOSP-prefinal
Google Apps
SuperSU
Screenshots:
Check attachments.
Terms and Conditions / Agreement.
If you want to say "Thanks!":
There are many ways to show your support to the developer. You can:
Press the "Thanks" button.
Hit the donation button and "buy me a beer".
Share your opinion about my work and write some feedback in the thread.
Advertise my work to your friends.
Rate my thread with 5 stars.
Sharing policy:
If you want to share my ROM to your friends or on other Forums, you are free to do it ,but please follow these rules:
Inform me about using my work by sending me a message. You don’t need my permission, but inform me.
Include a link to original thread.
Give proper credits for what you used.
Sharing is one thing, but please respect some areas of my work like:
ROM name, parts of my work that are not supposed to be used by others without proper permission.
Copyright:
So, you like my ROM and want to use it as a base or include parts of it in your ROM?
You will need my permissions to do it, so please PM me.Any copying without my permissions is considered a KANG!
Include link to my thread from where you took particular files
Give proper credits for what you used.
.
Support:
If you have any issues or questions, please feel free to post them.
If you want to get the fastest and the best answer - ask the question in the thread.
Don't PM me, i don't have time to read all my messages.
you won't know when you need more space. reserved.
Thanks for making the thread, I am really happy to see that my AOSP works good on the xperia Z2!
Everybody enjoy the rom
Your group link isn't working, who's on the team?
Edit: Wait i just rewrote the link.. this works! Will try soon!
Edit 2: Tried the ROM for a bit.
Art works, so that's what I've been using, so these issues might be due to that.
In settings, Advanced force crashes.
In Apps, clearing data of any app causes a soft reboot. I think the clearing of the data actually works, but it still soft reboots.
Titanium backup is stuck on "Asking for root rights" . so i tried checking SuperSU but said it had to be updated, but TWRP way wouldn't work, it just rebooted on a black screen with an orange led and i eventually had to connect to computer and ADB reboot. I don't actually think it's rooted.
I also can't get into recovery.. do i have to fastboot flash a recovery everytime I need to enter it?
Other than that it's smoother than anything I've tried on this ROM!
I really want to install this rom. I just have 2 questions, first what are the known bugs and also what am I gonna lose? x reality, 4k recording everything is gonna be gone?
shahabk818 said:
I really want to install this rom. I just have 2 questions, first what are the known bugs and also what am I gonna lose? x reality, 4k recording everything is gonna be gone?
Click to expand...
Click to collapse
Yes, you will lose Sony features. It's stock android, nothing more, nothing less.
Costinutz32 said:
Yes, you will lose Sony features. It's stock android, nothing more, nothing less.
Click to expand...
Click to collapse
I have issues with the sony's version, My question is how stable this rom is at the moment (I realize it can be work in progress) and also are the radios compatible with t mobile usa?
shahabk818 said:
I have issues with the sony's version, My question is how stable this rom is at the moment (I realize it can be work in progress) and also are the radios compatible with t mobile usa?
Click to expand...
Click to collapse
Rom is stable, didn't find an issue after 1-2 hours of testing. But we have no support for T-mobile devices.
Costinutz32 said:
Rom is stable, didn't find an issue after 1-2 hours of testing. But we have no support for T-mobile devices.
Click to expand...
Click to collapse
so it means its not gonna work with t mobile? Sorry this is really important i'm not even rooted, if i want to install it i have to make sure its gonna work for me
Sebba513 said:
Your group link isn't working, who's on the team?
Edit: Wait i just rewrote the link.. this works! Will try soon!
Edit 2: Tried the ROM for a bit.
Art works, so that's what I've been using, so these issues might be due to that.
In settings, Advanced force crashes.
In Apps, clearing data of any app causes a soft reboot. I think the clearing of the data actually works, but it still soft reboots.
Titanium backup is stuck on "Asking for root rights" . so i tried checking SuperSU but said it had to be updated, but TWRP way wouldn't work, it just rebooted on a black screen with an orange led and i eventually had to connect to computer and ADB reboot. I don't actually think it's rooted.
I also can't get into recovery.. do i have to fastboot flash a recovery everytime I need to enter it?
Other than that it's smoother than anything I've tried on this ROM!
Click to expand...
Click to collapse
The link works now, my bad.
Thank you for your reports, i will check them myself.
Can you please tell me what steps did you follow to install the rom ?
Costinutz32 said:
The link works now, my bad.
Thank you for your reports, i will check them myself.
Can you please tell me what steps did you follow to install the rom ?
Click to expand...
Click to collapse
I was on doomlord's kernel, first i used TWRP, formatted everything including system and internal storage.
Then installed ROM, gapps, and supersu, all from the links in OP. I tried the same things in CWM. I reverted back to doomlord's kernel each time for recovery, then flashed the ROM to get it to boot again. Can you integrate a recovery into the ROM?
shahabk818 said:
so it means its not gonna work with t mobile? Sorry this is really important i'm not even rooted, if i want to install it i have to make sure its gonna work for me
Click to expand...
Click to collapse
As far as i know, t-mobile kernels are different from our kernels. Correct me if i'm wrong.
I will pm you with some questions, maybe i can help you out.
Sebba513 said:
I was on doomlord's kernel, first i used TWRP, formatted everything including system and internal storage.
Then installed ROM, gapps, and supersu, all from the links in OP. I tried the same things in CWM. I reverted back to doomlord's kernel each time for recovery, then flashed the ROM to get it to boot again. Can you integrate a recovery into the ROM?
Click to expand...
Click to collapse
Recoveries are included with kernels. I will make an Aroma installer script, so everyone would choose his kernel. The one included in the ROM is what i considered is the most stable.
Sebba513 said:
Your group link isn't working, who's on the team?
Edit: Wait i just rewrote the link.. this works! Will try soon!
Edit 2: Tried the ROM for a bit.
Art works, so that's what I've been using, so these issues might be due to that.
In settings, Advanced force crashes.
In Apps, clearing data of any app causes a soft reboot. I think the clearing of the data actually works, but it still soft reboots.
Titanium backup is stuck on "Asking for root rights" . so i tried checking SuperSU but said it had to be updated, but TWRP way wouldn't work, it just rebooted on a black screen with an orange led and i eventually had to connect to computer and ADB reboot. I don't actually think it's rooted.
I also can't get into recovery.. do i have to fastboot flash a recovery everytime I need to enter it?
Other than that it's smoother than anything I've tried on this ROM!
Click to expand...
Click to collapse
After some diggin' into it, here is what i found :
The Advanced options crashes for a pretty dumb reason. The activity is not declared in the manifest. Will be fixed or removed. I don't know why it is even there, as it's a cm app.
About the clear data thing, i'll need to decompile some apps so i can see what's wrong in there. Will be fixed.
I am still looking into the super-user problem, i don't know what's causing it.
Thanks again!
Costinutz32 said:
After some diggin' into it, here is what i found :
The Advanced options crashes for a pretty dumb reason. The activity is not declared in the manifest. Will be fixed or removed. I don't know why it is even there, as it's a cm app.
About the clear data thing, i'll need to decompile some apps so i can see what's wrong in there. Will be fixed.
I am still looking into the super-user problem, i don't know what's causing it.
Thanks again!
Click to expand...
Click to collapse
Awesome! Can't wait to try new versions, this will probably become my main ROM! good work on getting back to me :good:
I still remember you guys are from Samsung Galaxy S Plus development ! Now we meet again ! :laugh:
Costinutz32 said:
After some diggin' into it, here is what i found :
The Advanced options crashes for a pretty dumb reason. The activity is not declared in the manifest. Will be fixed or removed. I don't know why it is even there, as it's a cm app.
About the clear data thing, i'll need to decompile some apps so i can see what's wrong in there. Will be fixed.
I am still looking into the super-user problem, i don't know what's causing it.
Thanks again!
Click to expand...
Click to collapse
The app crashes because it has not been included. (the apk is missing) also these settings provide extra options such as setting the vibration strength and enabling/disabling fast charging (if kernel supports). so I really recommend adding it.
for super user it is that you want to place a line in some init (in /etc) or in install-recovery.sh:
Code:
# Activate SuperUser Daemon if existing
if [ -e /system/xbin/daemonsu ]; then
/system/xbin/daemonsu --auto-daemon
fi
or implement init.d support would also do the trick. Users still need to install superuser (through cwm) themselfs tho
Good
thanks man , i will flash it
DISCLAIMER
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Warning:
this rom is for J500F but you can still test and report if it works on the J500FN also i need to mention that i dont own this device.
Information:
On 16.0.6.16 Samsung released officaly Android 6.0.1 for SM-J500F for the Indian J5 model, i decided to take this thing in my hand and tryed to make it 7 days after its release available for all Countries and ofc easy to install. TECHNICALLY it should boot fine for the J500F and J500FN model, however I CANT guarantee that it will boot so you need to try your luck and test. PLEASE: As soon as you test out, head over to XDA and post or pm me if it woked.
Edit: Seems like marshmallow wont boot with the lollipop bootloader so in clear text that does mean that you cant get around using Odin. If you are an J500F user please contact me. For J500FN users i am sorry to say that its unpossible currently to get marshmallow on your device because j500fn will refuse to load the j500f bootloader
Installation:
1. download the rom and put the downloaded file on your internal storage
2. install twrp recovery
3. boot into recovery
4. factory reset, wipe data and cache and format system and data
5. install rom
6. reboot and be patient as firstboot might take a long time
7. enjoy :good::laugh:
Download:
ALPHA_GALAXYJ5_601_ROM
If you could add the features too that would be great, but yeah im downloading and testing now
cheers
Simow.b said:
If you could add the features too that would be great, but yeah im downloading and testing now
cheers
Click to expand...
Click to collapse
Its stock Marshmallow 6.0.1 samsung so u could just google that quick ☺
oranaise2412 said:
Its stock Marshmallow 6.0.1 samsung so u could just google that quick
Click to expand...
Click to collapse
Tested on J500F it's not booting! it just gets you like a big yellow screen and then it reboots to the recovery
Good luck
Simow.b said:
Tested on J500F it's not booting! it just gets you like a big yellow screen and then it reboots to the recovery
Good luck
Click to expand...
Click to collapse
Hmmmm... TECHNICALLY it should work cuz the only dev thingy i did was making it a flashable zip
Maybe its a bootloader problem ! Do u have telegram or hangouts or so ?? Maybe we get this to work
Simow.b said:
Tested on J500F it's not booting! it just gets you like a big yellow screen and then it reboots to the recovery
Good luck
Click to expand...
Click to collapse
Also can u describe that yellow screen ? Does it show j5 splash screen ?
oranaise2412 said:
Also can u describe that yellow screen ? Does it show j5 splash screen ?
Click to expand...
Click to collapse
It shows that when i hit the reboot system after flashing the rom! it shows the samsung galaxy j5 screen then it starts with a blue line in the middle of the screen then it washes out the entire screen with yellow! i don't have hangouts nor telegram, pm me your skype
Simow.b said:
It shows that when i hit the reboot system after flashing the rom! it shows the samsung galaxy j5 screen then it starts with a blue line in the middle of the screen then it washes out the entire screen with yellow! i don't have hangouts nor telegram, pm me your skype
Click to expand...
Click to collapse
Alright lets chat on skype
oranaise2412 said:
DISCLAIMER
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Warning:
this rom is for J500F but you can still test and report if it works on the J500FN also i need to mention that i dont own this device.
Information:
On 16.0.6.16 Samsung released officaly Android 6.0.1 for SM-J500F for the Indian J5 model, i decided to take this thing in my hand and tryed to make it 7 days after its release available for all Countries and ofc easy to install. TECHNICALLY it should boot fine for the J500F and J500FN model, however I CANT guarantee that it will boot so you need to try your luck and test. PLEASE: As soon as you test out, head over to XDA and post or pm me if it woked.
Installation:
1. download the rom and put the downloaded file on your internal storage
2. install twrp recovery
3. boot into recovery
4. factory reset, wipe data and cache and format system and data
5. install rom
6. reboot and be patient as firstboot might take a long time
7. enjoy :good::laugh:
Download:
ALPHA_GALAXYJ5_601_ROM
Click to expand...
Click to collapse
EDIT:
Alright after a little bit of effort me and Simo'w got it working. Stay tuned will provide you with more info soon
I'll try next release on a j500fn. Hope it works!
Let's see, will test it on FN when you tell us how you've made it to work.
Does not work on my j500fn. Screen turns green after install and then turns back to twrp. Maybe there are ways to fix this Problem. Waiting to long for this version.
chello83 said:
Does not work on my j500fn. Screen turns green after install and then turns back to twrp. Maybe there are ways to fix this Problem. Waiting to long for this version.
Click to expand...
Click to collapse
Yea same thing here. Did you wipe system, data etc? Maybe we shouldn't do that in order to make it work.. hmm maybe worth a try I guess?
I wiped everything (cache/davlik/system/secure/storage) with twrp 3.0.2. Installation goes trough withouth any issues.
chello83 said:
I wiped everything (cache/davlik/system/secure/storage) with twrp 3.0.2. Installation goes trough withouth any issues.
Click to expand...
Click to collapse
I know. will test now a few variations: Deleting only system, deleting only Data... Will tell if I get it working or not this way.
EDIT: Not working, waiting for OP.
erik96joe said:
I know. will test now a few variations: Deleting only system, deleting only Data... Will tell if I get it working or not this way.
EDIT: Not working, waiting for OP.
Click to expand...
Click to collapse
This evening i will continue working on it i need more testers p.s. formating system and data is a must
oranaise2412 said:
This evening i will continue working on it i need more testers p.s. formating system and data is a must
Click to expand...
Click to collapse
I will love to test your rom on my j500fn. Maybe this way goes faster than the official samsung ota update for me in germany.
chello83 said:
I will love to test your rom on my j500fn. Maybe this way goes faster than the official samsung ota update for me in germany.
Click to expand...
Click to collapse
I speak german too hit me up on skype : opium165
For all who want to test add me on skype : opium165
Info: The reason why v0.1 did not work is the bootloader so means that we cant boot 6.0.1 with the lollipop bootloader
This evening i tryy to provide the marshmallow bootloader as a odin flashable , if all works fine i l be working on optimzing marshmalllow ( adding root , busybox bla bla )
oranaise2412 said:
I speak german too hit me up on skype : opium165
For all who want to test add me on skype : opium165
Click to expand...
Click to collapse
Added you I am free today all day long, so I can test anytime!
LineageOS is a free, community built, aftermarket firmware distribution of Android 8.1 (Oreo), which is designed to increase performance and reliability over stock Android for your device.
It should go without saying, but do not lock your bootloader with this installed. You must be 100% stock, I'd suggest on both slots, in order to re-lock your bootloader. Doing otherwise will likely lead to a brick that Essential really shouldn't warranty.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit our Gerrit Code Review.
Unofficial LineageOS Builds
Essential PH-1 (mata): https://updater.invisiblek.org/mata
Google apps
Google apps (opengapps nano) are baked in to these builds. This is due to the A/B partition layout and complications backing up/restoring gapps between builds. This is not ideal, and is the major road block to getting this device in to official status with Lineage. At this time I do not plan to release non-gapps builds. Users who require this will have to build their own.
Source
Device | Kernel
Here's a local_manifest for those who want to build at home.
Prerequisites
Unlocked bootloader
OPM1.180104.092 firmware - even if you were on this build, you should flash this firmware package to ensure the firmware is on BOTH slots.
Fastboot and ADB set up (use your google-fu to figure this out)
Installation
This device is different than what most people are familiar with due to the A/B partition layout. If you're familiar with Pixel devices, then you already know what this means. This thread isn't really designed to explain how it all works, that should be handled somewhere else. Instead, I'll assume you can either follow directions or do some research on your own. Additionally I have a discord set up where there are several people who may be able to help if you run in to a snag.
The initial install should go rather smooth, and future updates can be taken through the built-in Lineage updater app (yes, the are the seamless updates you may have heard about). Due to A/B, the recovery's ramdisk is actually on the boot.img partition (the rom's ramdisk is on the system partition now). What this means is once you flash the rom, it essentially (lol) replaces the TWRP that you have installed. This shouldn't be a problem since with the seamless updates, you shouldn't have to ever go into recovery. If you find yourself needing recovery, you'll have to re-flash TWRP to get there.
Phew, now some instructions.
See the prerequisites. You really do need these or things aren't going to work for you.
Boot into bootloader mode and wipe data with:
Code:
fastboot -w
Download twrp (mirror) and flash it with this command:
Code:
fastboot flash boot twrp-mata_11.img
(no, this isn't a typo, you are flashing twrp to the boot partition)
While still in bootloader mode, use vol down to select "Recovery mode" and hit the power button. This should boot you in to TWRP. Enter your previous lock screen password or pin (if it asks) to decrypt your data partition.
Put the device in sideload mode with:
Code:
adb shell twrp sideload
Install the zip via adb sideload with:
Code:
adb sideload <zip name here>
When finished, reboot.
Profit!
The LineageOS team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
XDA:DevDB Information
[ROM][UNOFFICIAL] LineageOS 15.1 for the Essential PH-1 (mata), ROM for the Essential Phone
Contributors
invisiblek
Source Code: [url]https://github.com/LineageOS[/URL]
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 4.x
Version Information
Status: Testing
Created 2017-11-12
Last Updated 2017-11-11
Q: What is broken?
A: Nothing I'm aware of
Q: Can I use the stock Essential camera app?
A: Yes
Q: Does the 360 cam work?
A: No.
Q: Is this rooted?
A: No. You're on your own for that.
Q: Does this pass SafetyNet?
A: Yes. Android pay, Pokemon Go, etc work fine. If you root, depending on your root method, you may lose this ability. But the ROM itself does pass SafetyNet.
2017-11-20 FAQ rollup: https://forum.xda-developers.com/showpost.php?p=74580036&postcount=189
FAQ site with some more info (be gentle with the terrible, or should i say complete lack of, css)
"Why no work" bug reports incoming in 5,4,3,2,1....
EDIT: @invisiblek if you need this post for anything, let me know.
THANK YOU!! So glad to see this. Just ordered the essential yesterday.
Any known bugs? How is performance compared to stock? Thanks for this!
Install it and find out. It's a testing build.
Awesome! Mine will be here soon.. glad to see development!!
Sent from my Nexus 6 using Tapatalk
First time with an A/B device, so everytime you update with a new build to the updater site it will prompt us and begin updating in the background? Don't have to be specific with the process itself but I was just curious as I'd like to stay up to date as possible if I start the custom ROM endeavor since it's still early on in development. Thanks!
installing now.. OP the link to twrp is broken
Thanks OP!
Got it up and running, seems pretty solid for the first build. The initial setup wizard hung at the last step for me but after a reboot it worked.
Oh, and the night mode works great!
^TWRP link worked for me about 30 mins ago
Update: I have installed most all of my apps and have been playing around setting up the phone for the last ~30mins....no stutters, no mistouches, everything is working great. LTE+ on VZW works, as well as Verizon messaging app. The phone apk has the option for vvm, haven't tested. Overall I can't believe how well this runs...ROM development has come a long way from the initial releases I'm used to on non nexus devices.
360 Camera doesn't work.....
CaptainElwood said:
Thanks OP!
Got it up and running, seems pretty solid for the first build. The initial setup wizard hung at the last step for me but after a reboot it worked.
Oh, and the night mode works great!
^TWRP link worked for me about 30 mins ago
Update: I have installed most all of my apps and have been playing around setting up the phone for the last ~30mins....no stutters, no mistouches, everything is working great. LTE+ on VZW works, as well as Verizon messaging app. The phone apk has the option for vvm, haven't tested. Overall I can't believe how well this runs...ROM development has come a long way from the initial releases I'm used to on non nexus devices.
Click to expand...
Click to collapse
Same feelings here. I really hope vvm works. Will test tomorrow... The ROM already kept me up tik now 3:09am
---------- Post added at 09:13 AM ---------- Previous post was at 09:09 AM ----------
Also on vzw don't see LTE + though.
Has installing lineage fixed the low signal strength problem for those people that have been experiencing it?
Sent from my ONEPLUS A5000 using Tapatalk
Works great! Found a wifi bug
Following the instructions posted, wifi stops working after flashing twrp and rebooting back into LOS. I flashed addonsu-14.1-arm64-signed.zip to enable App access to root. It worked, but wifi is broken on reboot. It turns itself off immediately after turning on.
Replication steps:
1. Follow steps in OP.
2. Reboot to bootloader (adb reboot-bootloader)
3. Flash twrp_mata-6.img (fastboot flash boot twrp.img)
4. adb push addonsu-14.1-arm64.zip /sdcard/
5. Install .zip in TWRP
6. Reboot
Anybody else getting this issue? The only way I've been able to fix it is to re-flash LOS.
EDIT: Thanks to @bmg1001, this issue is resolved (for me at least) by using this build of TWRP... Sorry, I can't post links yet! Can someone link this please?
https:// drive.google. com/file/d/1Pp9Hep-EEGNHLl6I_ob7ugihpKfrAcWm/view?usp=sharing
Note that flashing this TWRP build will allow you to reboot to recovery at any time without having to reflash TWRP, as mentioned in the OP.
omvir said:
Has installing lineage fixed the low signal strength problem for those people that have been experiencing it?
Sent from my ONEPLUS A5000 using Tapatalk
Click to expand...
Click to collapse
My signal strength improved from 2 bars to 3 bars at home, but I'm not sure if the reception has improved or just the number of bars displayed at certain signal strengths..
back2you said:
360 Camera doesn't work.....
Click to expand...
Click to collapse
You betrayed Sony
TWRP DL link not working
tclaybor said:
Following the instructions posted, wifi stops working after flashing twrp and rebooting back into LOS. I flashed addonsu-14.1-arm64-signed.zip to enable App access to root. It worked, but wifi is broken on reboot. It turns itself off immediately after turning on.
Replication steps:
1. Follow steps in OP.
2. Reboot to bootloader (adb reboot-bootloader)
3. Flash twrp_mata-6.img (fastboot flash boot twrp.img)
4. adb push addonsu-14.1-arm64.zip /sdcard/
5. Install .zip in TWRP
6. Reboot
Anybody else getting this issue? The only way I've been able to fix it is to re-flash LOS.
EDIT: Thanks to @bmg1001, this issue is resolved (for me at least) by using this build of TWRP... Sorry, I can't post links yet! Can someone link this please?
https:// drive.google. com/file/d/1Pp9Hep-EEGNHLl6I_ob7ugihpKfrAcWm/view?usp=sharing
Note that flashing this TWRP build will allow you to reboot to recovery at any time without having to reflash TWRP, as mentioned in the OP.
Click to expand...
Click to collapse
Good Morning!
The URL for TWRP isn't working for me. I copy pasted it in chrome address bar. Could someone please kindly help? I'm drooling to get started!
makbomb said:
Good Morning!
The URL for TWRP isn't working for me. I copy pasted it in chrome address bar. Could someone please kindly help? I'm drooling to get started!
Click to expand...
Click to collapse
Go to the rooting guide and it's in there. Use the mirror
---------- Post added at 01:36 PM ---------- Previous post was at 01:29 PM ----------
One thing I noticed is cell service is much weaker so far. In this same spot if my bedroom used to go from 99 to 103 dbm. Now it's at a118. Will monitor and report.
Shows 0 bars of service. Used to be 2-3
strictlyphat said:
Go to the rooting guide and it's in there. Use the mirror
Click to expand...
Click to collapse
Thanks, but it sounds like @tclaybor is using a different version, provided to him by @bmg1001 , since you'll see he was trying to link a google drive to that version?
makbomb said:
Thanks, but it sounds like @tclaybor is using a different version, provided to him by @bmg1001 , since you'll see he was trying to link a google drive to that version?
Click to expand...
Click to collapse
The one in bmg1001 thread worked. But have to click mirror.
---------- Post added at 02:54 PM ---------- Previous post was at 02:54 PM ----------
If u do get it installed let me know about signal. Mine taking big hit.
NcX 2.5 A71 ROMPretty straight forward, I took OneUI 2.5 firmware, debloated it and added a few features which can be found here: Link to MODs
My plan is to make this the best version of OneUI 2.5 with more features and fixed things (my mission is to fix Secure Folder in the near future) Fixed
Anyway, let's get started.
Code:
Your warranty is now void.
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about flashing this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you. HARD!
Features!
TWRP Included
Full OneUI 2.5 features
Debloated
Added camera features
Dolby Atmos without earphones
Optimized
Edge Lighting fully enabled
Secure Folder fixed
Smart View fixed
Samsung Health fixed
Samsung OCR service
Bugs!
Secure Folder broken (will try to fix later) Fixed on 2.5.1
Samsung Pass broken (because of knox 0x1, duh) Removed from ROM, it will never work.
Bug with AOD brightness when you use fingerprint unlock method. This bug happens when you have AOD to always show. If AOD is showing, then you turn the screen on to only show lockscreen clock and then turn the screen off for AOD to show, the brightness of AOD will reduce to the most minimal and it will be hard to see, regardless of what brightness you set up. There are 2 ways to getting rid of this bug:
Disable unlocking phone with fingerprint
Unlocking your phone and then locking it again. This will only fix it until you trigger the bug again
Fixed, clock animation removed.
You tell me
Changelog!
25/Oct/2020 (NcX 2.5.2):
Added 60 fps recording on selfie cam
Added wide selfies. (a biiiiit buggy, but serviceable)
Added 24 fps recording modes on pro video mode
Fixed Samsung Health
Added Samsung OCR Service for better text extraction
12/Oct/2020 (NcX 2.5.1):
Secure Folder fixed
Smart View fixed
AOD bug fixed
Removed Samsung Pass
Removed Samsung Daily
Removed "Tips" app
Removed Bixby
Added camera features
08/Oct/2020: Release
Links!
(V2.5.2)Google Drive
(V2.5.1)Google Drive
(V2.5)Google Drive
PrequisitesMANDATORY ALWAYS: SD Card. It IS possible to have it on internal storage but ONLY if you are not encrypted. If you are encrypted, then you will need to FORMAT DATA and that will delete everything in your internal storage and you won't be able to add it back to internal storage with TWRP because MTP is broken.For installing 2.5.1/2.5.2:
Installing and following NcX 2.5 installation steps, as well as its prequesites
TWRP Installed (included in NcX 2.5)
Download multidisabler.zip (link: From Telegram Group (also attached on this thread) and add to SD Card or internal storage
Download Magisk zip installer to your SD Card or internal storage
For installing 2.5:
Update to bootloader U3 (either install OneUI 2.1 or OneUI 2.5 fully with Odin), otherwise you will have problems with camera
Fully unlock bootloader. I don't mean just turning OEM unlock on in developer settings , I mean FULLY unlock. If you didn't know, Samsung changed up how you unlock the bootloader on newer devices like this one. @topjohnwu gets a little more specific here: Explanation but I'm going to quote the important stuff to FULLY unlock bootloader:
Unlocking BL on modern Samsung devices have some caveats, so I figure this would be helpful.
Allow bootloader unlocking in Developer options → OEM unlocking
Reboot to download mode: reboot and press the download mode key combo for your device.
Long press volume up to unlock the bootloader. This will wipe your data and automatically reboot.
If you think the bootloader is fully unlocked, it is actually not! Samsung introduced VaultKeeper, meaning the bootloader will still reject any unofficial partitions before VaultKeeper explicitly allows it.
Go through the initial setup. Skip through all the steps since data will be wiped again later.
Connect the device to Internet during the setup.
Enable developer options, and confirm that the OEM unlocking option exists and is grayed out. This means the VaultKeeper service has unleashed the bootloader.
Your bootloader now accepts unofficial images in download mode.
Click to expand...
Click to collapse
Download Magisk zip installer to your SD Card or internal storage
Download multidisabler.zip (link: From Telegram Group and also attached in this thread) and add to SD Card or internal storage
Instructions!For installing 2.5.1/2.5.2:
Reboot to TWRP
Flash NcX 2.5.1.img or NcX 2.5.2 as "super" image in TWRP
Reboot to Recovery
Format data if you are coming from Stock ROM. If you are coming from NcX 2.5 then you don't need to wipe or format, you can just skip this step.
Flash multidisabler (this is required always)
Flash Magisk zip (optional)
Reboot and wait patiently
For installing 2.5:
Reboot to download mode and add AP_NcX 2.5 A71 in AP on Odin
Uncheck the Auto reboot option in Odin
Flash
When it is finished, force a manual reboot (keep pressing VOL - and Power buttons together)
Immediately when phone reboots, boot to recovery mode (VOL + and Power button)
If your phone was unencrypted before, just do a normal wipe. If your phone was not unencrypted before, do a full data format (Go to WIPE option in TWRP, select FORMAT DATA button at the bottom and they type yes on the keyboard. This will completely wipe your internal storage so be sure to backup and photos, music, etc... you have in internal media.)
Flash multidisabler to ensure you do not get encrypted
Flash magisk (I don't know if this is mandatory, I would fully recommend it though)
Reboot and wait patiently
Credits! @ananjaser1211 for all your help and always willing to lend a helping hand
@SuperR. For his Super R's Kitchen which you can find here: https://forum.xda-developers.com/ap...dows-linux-superr-s-kitchen-v3-0-0-0-t3601702
@topjohnwu for Magisk
@sac23 for his tutorial on how to fix Secure Folder which you can find here: https://forum.xda-developers.com/showpost.php?p=82978861&postcount=1522
@Belco02 for the extra camera modes and features
@ianmacd in Telegram group TWRP/Root Samsung Android Devices for compiling TWRP for us
@ Samsung for the firmware
@ Team TWRP for their amazing recovery
@ To users like you!
If you feel I missed you, please give me a PM so I can add you
XDA:DevDB Information
NcX 2.5 for A71, ROM for the Samsung Galaxy A71
Contributors
ShaDisNX255, Ian Macdonald
Source Code: https://github.com/ianmacd/twrp_a71
Source Code: https://github.com/ianmacd/a71
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
Based On: OneUI 2.5
Version Information
Status: Stable
Current Stable Version: 2.5
Stable Release Date: 2020-10-08
Created 2020-10-08
Last Updated 2020-10-08
Join our Telegram group
Code:
Check out the latest projects on our Telegram group, where we share our advancement on new things and try to help as best as we can.
For anything already released, please ask here in XDA
Link: Telegram Group
Join our Discord group
Code:
Check out the latest projects on our Discord, where we share our advancement on new things and try to help as best as we can.
For anything already released, please ask here in XDA
Link: Discord
Android group in spanish
Link: Grupo Android
FAQ
[Q] My phone is stuck in bootloop/infinite boot, what should I do?
[A] It is normal for first instalation to take aprox 10-20 minutes on first boot, let it sit for a little bit
[Q] Even after 20 minutes, my phone is still in a bootloop/infinite boot, what can I do?
[A] It is possible that your previoius Android setup is conflicting with this new setup. Please, do the following:
1. FORMAT DATA (not WIPE, FORMAT!)
2. Try the instalation of NcX again
[Q] I've found a bug, what should I do
[A] Please read the "Bugs" section of the thread to see if your bug has been reported, if it hasn't, please let me know exactly what the problem is so I can take a look
[Q] I flashed magisk on TWRP but no apps are asking for SU Permission
[A] Make sure you have the Magisk Manager app installed
[Q] I don't see Magisk Manager in my apps
[A] You need to download the manager from the official source: https://github.com/topjohnwu/Magisk
[Q] Something bothers me and I want it fixed/changed
[A] Please, kindly make a request and if it's within my grasp, I'll try to fix it. Just, don't be rude and demand something. Either that or return to stock, your choice
How to report a bug/Ask for a change
Over the small amount of time I've been doing my edits and shared them with the community, I've noticed something that seems to irritate me. I can't speak for all the developers on this forum, but I do edits/ROMs/PORTs/etc... to what I like. I don't work for anybody else but me. I share my work because it may have something of value to other people and/or some people may share the same taste as me on regards to what they want on a ROM.
That being said, that doesn't mean I will completely ignore what the community has to say.
First and foremost, it must be said, I am merely a beginner. I do not claim to be a professional developer that knows how to add everything, I am nowhere close and I learn as I go.
There are ways to ask for something and/or report a bug when it comes to ROMs, and this post is my attempt to try to explain how to (and how not to) report a bug in order to help me out as much as possible to try to fix something
You can also ask for something to be added, but there are also ways to ask for something
So, here we go
Keep in mind:
I do not add stuff that can easily be downloaded from the Playstore
I, myself, don't do kernel edits
I COULD remove stuff if NOBODY uses it
---REPORTING BUGS---
How NOT to report a bug:
"SystemUI (or any app)is crashing, please help!"
"Instagram doesn't allow me to edit my post, what could be wrong?"
"My bank account app is not letting me do such thing"
These posts are sort of pointless as they only state something but I have no context on what could be causing it. Also, I can't really control (for the most part) third-party apps, so if you're going to ask about them this way, don't even bother
A slightly better way to report a bug:
"I clean installed the ROM and was working fine, after I installed Facebook and logged in, I immediately uploaded a photo and SystemUI started to crash. Can you look in to it?"
"I tried to install Black Neon theme (a link to it would work as well) and it was working fine until I tried to activate AOD (or anything else for some reason) and SystemUI (or any other app) is crashing, could you look in to it?"
"My bank account app doesn't let me take a screenshot of my accounts. I get a toast notification saying "Can't take screenshot due to security policy"
As you can see, this provides a bit more context and explanation on your current situation. This gives me a little more detail on trying to replicate the problem and hopefully could fix it by replicating it. Well, except for point #3 which is out of my hands for the most part (I think). If you include what kernel you're using would make everything better! Also any significant change that would require root (like xposed and or anything that modifies /system also needs to be informed for better results)
The BEST way to report a bug:
LOGCAT!!!!!!!!!!!!!!!!!!
Please learn the ins and outs of a logcat, this really helps a lot on finding what the problem is. Also, please give a brief explanation as the above examples when providing a log cat
---ASKING FOR STUFF TO BE ADDED---
How NOT to ask for stuff:
On your next update, add iris scanner
You should add (app) on your next update
Hey, please add (app or feature) on your next update
No, I do not work for you. Even if you say please like the third example, that doesn't mean you're being polite. It still sounds like an order lol so you should probably rephrase your request.
How to ask for stuff to be added to my work:
Would you be so kind to add (feature) to your ROM, if possible?
Would it be possible to add this app to your ROM?
Please, can you add (feature) to your ROM, if it isn't much to ask?
See how politeness makes everything better? You're not demanding it, you're just politely asking to see if maybe it is within my grasp to add something. And if all request would be like this, I can assure you I'd try my best to add said feature
I hope this is useful to you or I at least hope that some people read it.
If not, I can just tell you to return to stock ROM, probably better than any ROM I put out anyway
Enjoy guys, keep on the lookout for updates. I plan on adding more MODs and fixes
Attach the singletake .xml also here
sankhauaa said:
Attach the singletake .xml also here
Click to expand...
Click to collapse
I'll hold it off.
Plan on adding a future update with this and more stuff included
Good mod! Downloading...
well done mate, nice to see
New update hopefully tomorrow.
What's new?
-Fix Secure Folder, now working
-Fix Smart View mirroring, now working
-Adding CSC features, in progress
When i try to do the process of unlocking again It say after long press volume up. Lock Bootloader? Guess thats not what i want? My device is rooted stock with twrp installed..... Do you have an idea.?
I want to install your rom.
hans3103 said:
When i try to do the process of unlocking again It say after long press volume up. Lock Bootloader? Guess thats not what i want? My device is rooted stock with twrp installed..... Do you have an idea.?
I want to install your rom.
Click to expand...
Click to collapse
If you've already rooted, that means you have fully unlocked bootloader and it means that you can now freely install my ROM.
I installed it, it look very good. Its a big timesaver also. I used to root this device in a time comsuming way. This rom is very easy.... Very nice work!
hans3103 said:
I installed it, it look very good. Its a big timesaver also. I used to root this device in a time comsuming way. This rom is very easy.... Very nice work!
Click to expand...
Click to collapse
Thanks, next version will be easier to flash, just with super.img flash on TWRP.
ShaDisNX255 said:
Thanks, next version will be easier to flash, just with super.img flash on TWRP.
Click to expand...
Click to collapse
I will try it for sure, can I do an update or do I have to make a clean install?
hans3103 said:
I will try it for sure, can I do an update or do I have to make a clean install?
Click to expand...
Click to collapse
It can be installed with current version so no need to wipe data
ShaDisNX255 said:
It can be installed with current version so no need to wipe data
Click to expand...
Click to collapse
Very nice....many thanks!
nice business friend
Even if resizing in vendor, it will be nice because it will be very possible to make mod and custom kernel
No idea
my galaxy a71 its still in bootloop. bootloader fully unlocked with oem activated. data formated, installed decrypted data, and magisk zip installed, pls help..
zorexblade said:
my galaxy a71 its still in bootloop. bootloader fully unlocked with oem activated. data formated, installed decrypted data, and magisk zip installed, pls help..
Click to expand...
Click to collapse
Are you getting to boot animation?
Were there any red messages in TWRP when you were installing?
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
Hi,
this is nearly completely based on:
LineageOS 19.1 (Android 12L) for GT-N8000 GT-N8005 GT-N8010 GT-N8013 GT-N8020 BETA
/* * Your warranty is now void. * * I am not responsible for bricked devices, dead SD cards, * thermonuclear war, or you getting fired because the alarm app failed. Please * do some research if you have any concerns about features included in...
forum.xda-developers.com
Thats why we still have the same bugs, if I solve them, both will receive updates.
Here you can see how far everything is working for now.
Spoiler: Whats working
N8000, N8010, N8013, N8020:
Boot
Bluetooth
Audio
Graphics
Cameras
Sensors
GPS
Wifi
USB
Video playback (HW/SW)
Tethering via USB, WIFI and Bluetooth
consumerir transmitter
Stylus with gestures and hovering icon
RIL
much more...
Spoiler: Whats not working
Random reboots
sec_keyboard, dock keyboard station, because it drains the battery somehow
Screen lightning bug
Long screenshot
SD-Card can't be formatted as internal storage, this will cause a bootloop
Spoiler: Links
TWRP
N8000 / N8005 Rom
N8010 / N8013 Rom
N8020 Rom
Spoiler: Changelog
15.03.2022
01.04.2022
13.07.2022
18.08.2022
Spoiler: Don't like my boot picture?
If you don't like it, reboot into recovery and type the following command:
adb shell (or use TWRP's terminal)
bash /data/param_restore.sh
reboot
Uploaded a prepared package to build your own boot picture
https://androidfilehost.com/?fid=7161016148664799666
There is no space for gapps, if you don't expand the system partition manually.
I would recommend to use microG instead,
here you can find the installation instructions:
Spoiler: microG instructions
Download Magisk 24.1 and flash it via TWRP (yes, flash the APK file), reboot
Open Magisk and update the App (and do a reboot if it's asking)
Enable Zygisk in Magisk
Download and install microG installer in the Magisk manager, reboot
Download and install safetynet-fix in the Magisk manager, reboot
Check with a safetynet checker app and you should pass
If you plan to use a sim card in your device, I would recommend to disable the pin code before with another device.
In some cases the sim card becomes unusable while typing in the code.
Do you like my work?
Than you can simply hit the thanks button and consider to spend me a coffee or a beer,
I'm doing this in my free time and it also costs a lot of money to buy hardware.
donate
Spoiler: How to install it?
Instructions
XDA:DevDB Information
[ROM][12.x][N8000/N801x/N8020][BETA] crDroid 8.3, ROM for the Samsung Galaxy Note 10.1
Contributors
html6405
Source Code: https://github.com/html6405
ROM OS Version: 12.x S
ROM Kernel: Linux 3.x
ROM Firmware Required: TWRP 3.5.2
Based On: crDroid, LineageOS
Selinux: permissive, this only makes sense as soon the ROM is stable.
Version Information
Status: Beta
Created 2022-03-12
Last Updated 2022-08-18
*reserved
First of all, thank you for that ROM. It keeps my beloved Tablet alive
Yesterday I installed it exactly like discribed. After flashing (without Gapps) and the newest version of TWTP. The Rom stucks with the wizard at the "no Sim card inserted" screen. The tablet n8010 didn't got a Sim slot?!
I tried to erase "data" partition, but had no luck.
The lineage os from your page works like a charm.
What can I do?thanks
Avalon01 said:
First of all, thank you for that ROM. It keeps my beloved Tablet alive
Yesterday I installed it exactly like discribed. After flashing (without Gapps) and the newest version of TWTP. The Rom stucks with the wizard at the "no Sim card inserted" screen. The tablet n8010 didn't got a Sim slot?!
I tried to erase "data" partition, but had no luck.
The lineage os from your page works like a charm.
What can I do?thanks
Click to expand...
Click to collapse
Hi,
thanks for your report,
I've honestly thought that I've fixed this problem in the build of yesterday,
did you try this one or the build from the 12.03?
YES! Thank you. It's fixed. Yesterday I tried the Version from the day bevore yesterday
Best regards
Avalon01 said:
YES! Thank you. It's fixed. Yesterday I tried the Version from the day bevore yesterday
Best regards
Click to expand...
Click to collapse
Great .
Update 15.03.2022:
Fixed setup wizard completely
Fixed Updater crash
Hopefully improved screen lightning bug
I didn't get Magisk to work. After flash (the file which is linked here) and starting Magisk app it wants to update. It updates to newest version. After reboot it wants to update boot image. But it fails. "no image found"
If I play this game with the latest version (factory reset, erasing system +flash your image + install 24.3) the all says after opening "there is something to install, do you want to reboot?" like this. If I push yes it says "setup failed" and nothing. Magisk (root) does nothing.
The second problem is video performance. I tested vlc with several configuration. But it lags. Screen freezes. I got a Samsung tab 3 with a custom rom ( Android 7) and it runs like hell
The Gt n8010 must be much better! So I think it's a problem coming from an driver!?
I hope you like that feedback here.
Best regards
Avalon01 said:
I didn't get Magisk to work. After flash (the file which is linked here) and starting Magisk app it wants to update. It updates to newest version. After reboot it wants to update boot image. But it fails. "no image found"
Click to expand...
Click to collapse
Hi,
try Magisk v23 or 24.1, newer version will cause problems.
Avalon01 said:
The second problem is video performance. I tested vlc with several configuration. But it lags. Screen freezes. I got a Samsung tab 3 with a custom rom ( Android 7) and it runs like hell
Click to expand...
Click to collapse
It depends on which video format is used,
in the first version, OMX.SEC.AVC.Decoder was removed,
because it starts some videos the first minute weirdly.
Could you give it a retry with the most recent version?
Also, I would need a logcat while performing some action, otherwise I can't do anything.
And well, this is Android 12, it may also run like hell with Android 7 .
Avalon01 said:
The Gt n8010 must be much better! So I think it's a problem coming from an driver!?
Click to expand...
Click to collapse
It must not, consider that you're running Android 12 on a 10 year old device, it's not a problem of a driver,
it's more a decoding issue.
@html6405
Best new rom for our old N80.. series.......still a lot better than LineageOS19 I think....
@html6405
Sorry, but I have some problems with VPN....
Theres no possibility to customize vpn (no "+" sign)
And another problem (same as with lineageOS17-19):
Some apps (for example covPass or some banking apps (phototan)) are not able to scan (camera function fails)
But nevertheless: Best rom with many customisation possibillities (from crdroid)
Hey,
Good morning, CR Droid 8.3 was released with android 12L, Will this Rom receive this update?
Alexfs said:
Hey,
Good morning, CR Droid 8.3 was released with android 12L, Will this Rom receive this update?
Click to expand...
Click to collapse
Thats already in work
Update 01.04.2021:
Synced with crDroid 8.3 sources (Android 12L)
Fixed boot problem, which mostly appeared after booting from TWRP
Fixed shutdown bug (device restarted sometimes instead)
Implemented Boeffla sound
Switched from Camera2 to OpenCamera because of implementation problems, this means that the flashlight won't work until I've fixed this
Attention: a clean installation is needed!
html6405 said:
Update 01.04.2021:
Synced with crDroid 8.3 sources (Android 12L)
Fixed boot problem, which mostly appeared after booting from TWRP
Fixed shutdown bug (device restarted sometimes instead)
Implemented Boeffla sound
Switched from Camera2 to OpenCamera because of implementation problems, this means that the flashlight won't work until I've fixed this
Attention: a clean installation is needed!
Click to expand...
Click to collapse
Lets test
@html6405 AVC decoder enabled, right?
Vladdrako said:
@html6405 AVC decoder enabled, right?
Click to expand...
Click to collapse
Still disabled.
What GApps do I install? I tried the Mindthegapps and Nikgapps from the LineageOs 19.1 thread but all of them keep telling me that I "have not enough space to install GApps".
Operator69 said:
What GApps do I install? I tried the Mindthegapps and Nikgapps from the LineageOs 19.1 thread but all of them keep telling me that I "have not enough space to install GApps".
Click to expand...
Click to collapse
None of them will fit, you would have to expand your system partition.
Is there a how to?
Maybe that's the problem here with my n8010. After installing some apps got fc. And magisk definitely DON'T work for me. After install (every time clean) many apps are closing immediately after start. And the system is laggy. I tested versions 22.0,23.0 and 24.1. All with a new and clean installed system. Flashing via twrp.
The only systems which work are lineage 16.0 and 19.1 WITHOUT root
19.1 without root works very stable and fast. Cr doesn't. Maybe you are working with an other device E.G. N8000. And the version for n8010 has a problem. Or I have to increase some partition or space!?
BTW thank you for the great ROM!