[ROM][6.0.x][v500][UNOFFICIAL] CyanogenMod 13.0 [20161107] - G Pad 8.3 Original Android Development

[ROM][6.0.x][v500][UNOFFICIAL] CyanogenMod 13.0 [20161107] - G Pad 8.3 Original Android Development

Bug reports:
Explain how to reproduce the bug and attach logs (logcat and dmesg). If you don't know how to get those, you can use this app. Please, do not report bugs if you use any kind of mods (like xposed) or third party kernel.
Known bugs
IR Blaster doesn't work.
Frequently Asked Questions:
Q) How can I unlock Developer options?
A) Go to Settings > About phone, and press five times on Build number.
Q) How can I enable root access?
A) Go to Settings > Developer options > Root access, and enable it for apps, adb or both.
Q) Why is wifi always on in battery stats, even if it was disabled?
A) Go to Settings > Location > press on the 3 dots (top right) > scanning > disable wifi.
Q) How do I update Gapps? (Also useful if you have Gapps related problems).
A) Reboot into recovery. Wipe System, Cache and Dalvik Cache. Install ROM + Gapps. Reboot.

Bootloader
This rom is meant to be used with kitkat bootloader. If you are unsure of what bootloader you are using, you should flash the following zip within recovery (official TWRP recommended):
V50020F Bootloader: https://www.androidfilehost.com/?fid=24352994023707804
* Some stock based roms flash bootloader files without the user being aware of it. So just to be safe, I recommend everybody to flash the above zip to make sure that you are using all the correct bootloader files.

The installation went perfectly on a clean installation.
Huge thanks!

Same here installation is fine. Any way to make my sdcard work without a format?

ukguy115 said:
Same here installation is fine. Any way to make my sdcard work without a format?
Click to expand...
Click to collapse
yes, select portable storage.

Tried portable storage but said it was corrupt. Bit the bullet and formatted, had a backup so no biggie. ROM working great though.
Sent from my LG-V500 using Tapatalk

ukguy115 said:
Tried portable storage but said it was corrupt. Bit the bullet and formatted, had a backup so no biggie. ROM working great though.
Sent from my LG-V500 using Tapatalk
Click to expand...
Click to collapse
Same here.
Sent from my Nexus 6 using Tapatalk

kbluhm said:
Same here.
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
I had no problems and did not need a reformat using portable storage.

ukguy115 said:
Same here installation is fine. Any way to make my sdcard work without a format?
Click to expand...
Click to collapse
There are two ways you can use your sdcard in marshmallow, as external storage or as emulated internal storage. Only the second one should require to format the sdcard.
ukguy115 said:
Tried portable storage but said it was corrupt. Bit the bullet and formatted, had a backup so no biggie. ROM working great though.
Sent from my LG-V500 using Tapatalk
Click to expand...
Click to collapse
kbluhm said:
Same here.
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
I'm not sure why this is happening to you. You could try deleting the .android_secure folder in your external sdcard from recovery. That could be the reason why it says your sdcard is corrupt.

And I just did a clean installation of the latest CM12.1 today...
Thanks a lot @fefifofum! Downloading! I guess I'll go to sleep later tonight!

I tried to run Antutu but everytime it stops at 76%.
And adding a profile picture doesn't work.

Two minor things maybe; is a clear all recents button available somewhere and I can't turn off keyboard/touch sounds, I turn off the toggle but they are still on.
Sent from my LG-V500 using Tapatalk

ukguy115 said:
Two minor things maybe; is a clear all recents button available somewhere and I can't turn off keyboard/touch sounds, I turn off the toggle but they are still on.
Sent from my LG-V500 using Tapatalk
Click to expand...
Click to collapse
You goto keyboard settings and disable from there.

fefifofum said:
There are two ways you can use your sdcard in marshmallow, as external storage or as emulated internal storage. Only the second one should require to format the sdcard.
I'm not sure why this is happening to you. You could try deleting the .android_secure folder in your external sdcard from recovery. That could be the reason why it says your sdcard is corrupt.
Click to expand...
Click to collapse
I too needed to format my sdcard (in portable mode) maybe filesystem related? I had an exfat fs now its fat32.

Installed yesterday. Enjoying now! Just great! Gamma is much better than in the two recent 12.1s.
Can't figure, though, how to make voice input work. There is a mic icon on keyboard... but nothing happens. Can live with that.

Portable storage works for me. I experienced some sd dismounts as on cm12.1. But in contrast to cm12.1 the external sd doesn't remount by itself. So I have to make reboot...
Otherwise everything seems work smooth and stable. Thanks for your hard work!

DSC05 said:
Portable storage works for me. I experienced some sd dismounts as on cm12.1. But in contrast to cm12.1 the external sd doesn't remount by itself. So I have to make reboot...
Otherwise everything seems work smooth and stable. Thanks for your hard work!
Click to expand...
Click to collapse
So are you using the ROM in this thread? Or are you using cm12.1?

zebinadams said:
So are you using the ROM in this thread? Or are you using cm12.1?
Click to expand...
Click to collapse
CM 13 of this thread and I compared it to latest cm12.1 build of fefifofum

Fenomeno-Tony said:
I tried to run Antutu but everytime it stops at 76%.
And adding a profile picture doesn't work.
Click to expand...
Click to collapse
That's caused by the adreno blobs from flo 6.0 used in this first release. Now I updated them from latest qcom release and the 3d test in antutu doesn't fail anymore. So tomorrow I will release a new build with that issue fixed.
ukguy115 said:
Two minor things maybe; is a clear all recents button available somewhere and I can't turn off keyboard/touch sounds, I turn off the toggle but they are still on.
Sent from my LG-V500 using Tapatalk
Click to expand...
Click to collapse
I think that the first issue you mention is an upstream bug, we have to wait for it to get fixed.
Darkmasterhk said:
I too needed to format my sdcard (in portable mode) maybe filesystem related? I had an exfat fs now its fat32.
Click to expand...
Click to collapse
That could be related to android_secure folder in external sdcard, but I need someone to erase it from recovery and confirm if that solves the issue. If that is the case, what I really need to fix is TWRP, which should erase android_secure folder when you do a factory reset.
mackeev said:
Installed yesterday. Enjoying now! Just great! Gamma is much better than in the two recent 12.1s.
Can't figure, though, how to make voice input work. There is a mic icon on keyboard... but nothing happens. Can live with that.
Click to expand...
Click to collapse
Gamma should be exactly the same as in my builds of cm-12.1. About voice input, it's probably an upstream bug too.
DSC05 said:
Portable storage works for me. I experienced some sd dismounts as on cm12.1. But in contrast to cm12.1 the external sd doesn't remount by itself. So I have to make reboot...
Otherwise everything seems work smooth and stable. Thanks for your hard work!
Click to expand...
Click to collapse
Maybe the new storage approach used in marshmallow makes the sdcard not to remount automatically, no idea since I don't have unmounts. I'm sure someone else will confirm this in the following days. This post is interesting, you should read it, maybe the easiest workaround is to use a different sdcard. What brand, capacity, class... is the sdcard you are using?

Related

[ROM][XSP][JB4.3.1][AOSP] Slim-4.3.Build.2.1 - Unofficial [HuaShan][11/14]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Disclaimer: We are not responsible for any damages on your device.
Original Slim Features:
The Real Dark Slim
Notification drawer Shortcuts
Full hardware key rebinding!
Keyboard rotation
SlimCenter
Check out our full feature list here
Changelog
Find our latest Changelog go here
Chat with the slim team and other slim users
IRC: #slimusers @freenode
New to IRC? Don't have a native app? Try the Freenode web client [link] or the Firefox extension Chatzilla [link]
Google+ [link]
Twitter [link]
Facebook [Link]
Installation instructions
For Most Users
Please keep in mind if a special instruction is needed it will be noted in the Changelog
Unlock Bootloader if not already
Download the ROM and GApps
Reboot to Recovery
Wipe data/factory reset
Wipe dalvik cache and cache
Format /system
Flash the ROM and then Gapps
Wipe data/factory reset *for insurance*
Wipe dalvik cache and cache *for insurance*
Reboot your phone
Enjoy
Downloads
Slim_huashan_4.3.build.2.1_UNOFFICIAL_20131114_0645.zip or mirror by @panjgoori
SlimBean Google Apps
FAQ
Check out out FAQ before posting! Keeps more common questions answered in one place!
For cwm issues, i suggest to use any AOSP based rom boot.img (extract it from rom zip), flash using fastboot "fastboot flash boot boot.img"
or you can use my experimental boot.img (flash this from cwm) i am using this and no problem till now ....
Help us out!
If you want to help us by translating slim to your language check out Crowdin.net and submite your translations.
Or consider a donation.
Thanks!
You can find the full list of credits here
Special thanks to ubberlaggydarwin, adfad666, -kali, eagleeyetom - for bringing hope to our device
FreeXperia Team
DooMLoRD - For kernel stuff.
ngoralph - For offline charging fix.
if you think I've used your work and forget to add your name here, just pm me ...
Source
Please visit here for the rom source code.
Kernel source can be found here
Additional Info
This is just temporary build ,i won't make an update until CM is officially released.
Additional File
JB 4.3.1 AOSP BOOT.IMG or mirror by @panjgoori
Added Feature :
Intellidemand Gov
Wheatley Gov
SIO I/O Scheduler
ROW I/O Scheduler
hope i can add more in the future ...
XDA:DevDB Information
Unofficial Slimbean for Xperia SP, a ROM for the Sony Xperia SP
Contributors
jacknb1ack
ROM OS Version: 4.3.x Jellybean
ROM Kernel: Linux 3.4.x
ROM Firmware Required: CWM/TWRP, Unlocked Bootloader
Based On: AOSP
Version Information
Status: Testing
Created 2013-11-22
Last Updated 2013-11-24

My favourite. Loved it on my xperia ray, wondering how it will look on a bigger screen. Downloading now.
Sent from my C5303 using XDA Premium 4 mobile app

Enjoying it very much.
Only unusual thing is that the CWM recovery in this ROM doesn't allow me to mount the external SD card. So no back ups, installs or restores there - some of my nandroid back ups are 2GB and the SP only has 5GB of internal memory for the user...
Otherwise, working really nicely, thanks!

Parkside said:
My favourite. Loved it on my xperia ray, wondering how it will look on a bigger screen. Downloading now.
Sent from my C5303 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yup.. i love my xray too.... Used to install SJB n Slimbean... i ll flashing this too...

Parkside said:
Enjoying it very much.
Only unusual thing is that the CWM recovery in this ROM doesn't allow me to mount the external SD card. So no back ups, installs or restores there - some of my nandroid back ups are 2GB and the SP only has 5GB of internal memory for the user...
Otherwise, working really nicely, thanks!
Click to expand...
Click to collapse
use kernel from other rom, as i know recovery are embedded in the kernel

Great job man! What took you so long? I thought you had it ready long before...

In Recovery i can not use my external SD Card! I'm worry about this, becouse this ROM is awesome. But i can not use it for daily, that is really really sad!:crying::crying::crying:
But, thanks for the Dev! Great job man!:good:
Sorry for my bad english

This rom is almost PERFECT!
I'm always a fan of slimbean ROM as I use them as my daily driver during my gt-i9100g days
The only problem is like what @Parkside has said, the recovery does not recognize external sd card
but that doesn't stop me from using this while waiting for CM11, because this rom is just awesome!
Thanks for this :good:
edit: found another bug,
got some problem with wifi I think, it can't detect or connect manually to wifi that is encrypted by WPA2-AES security. (that's what my windows 7 state here)
Other than that wifi is working flawlessly.
oh and also, the performance is MIND-BLOWING!
edit2: the wifi can't detect network that the encryption type that is ONLY WPA2 (does not care AES/TKIP/Whatsoever)
yay this going to be my daily driver right now woohhooo (so happy LOL)

zion609 said:
edit2: the wifi can't detect network that the encryption type that is ONLY WPA2 (does not care AES/TKIP/Whatsoever)
Click to expand...
Click to collapse
I am not facing this issue, maybe problem in your AP.
@all who need ext sdcard in cwm, faq updated.
Sent from my C5302

hi, the battery life is good? almost of stock? thanks

jacknb1ack said:
I am not facing this issue, maybe problem in your AP.
@all who need ext sdcard in cwm, faq updated.
Sent from my C5302
Click to expand...
Click to collapse
change some settings on my AP and working well :good:
tested the boot.img (OP experimental) and now I can use external back in CWM.
All in all, working extremely well :laugh:
Just a question though, the internal memory seems like it is being emulated.
I found that this rom use a folder (the name of the folder is"0") as 'emulated' internal memory.
The folder is created on the root of internal memory of the phone (which I can't accessed after booting the phone)
Weird? Dunno. I believe it must have it own reason

zion609 said:
change some settings on my AP and working well :good:
tested the boot.img (OP experimental) and now I can use external back in CWM.
All in all, working extremely well :laugh:
Just a question though, the internal memory seems like it is being emulated.
I found that this rom use a folder (the name of the folder is"0") as 'emulated' internal memory.
The folder is created on the root of internal memory of the phone (which I can't accessed after booting the phone)
Weird? Dunno. I believe it must have it own reason
Click to expand...
Click to collapse
That's the default folder structure since Android started having multi user capabilities. Don't worry!

zion609 said:
change some settings on my AP and working well :good:
tested the boot.img (OP experimental) and now I can use external back in CWM.
All in all, working extremely well :laugh:
Just a question though, the internal memory seems like it is being emulated.
I found that this rom use a folder (the name of the folder is"0") as 'emulated' internal memory.
The folder is created on the root of internal memory of the phone (which I can't accessed after booting the phone)
Weird? Dunno. I believe it must have it own reason
Click to expand...
Click to collapse
All AOSP ROMs does that it emulate internal memory cm, pac, aokp & all others use folder "sdcard0/0" ad internal memory not Just "/sdcard0"
It even effects recoverys you won't be able to restore any backup stored in internal memory up from folder 0
Sent from my C5303 using xda premium
---------- Post added at 06:29 PM ---------- Previous post was at 06:26 PM ----------
You can access internal memory by using any root Explorer and go to root/shell/sdcard0 you'll get your stock internal memory and you'll see folder 0 as a internal memory for aosps roms
Sent from my C5303 using xda premium

Friend, I'm testing your ROM and so far it seems that the best is based on AOSP, Your new kernel works perfectly, and the rom is very smooth, and battery'm still doing tests and I expect a 3 charge cycles ...
Inverted GAPPS is very cool, a great ROM, my Greetings
sorry for the bad english

Thx for the explaination regarding the internal memory.
Never noticed when I'm using the PAC nightly rom. Seems like I was far behind. Was using s2 but then had to use blackberry for some month, must be missing out lots of things in android world :3
Anyway, battery for me so far is about the same as stock. But the performance is much more outstanding of course.
Sent from my C5302 using XDA Premium 4 mobile app

Just amazing.I installed it now and it looks great, fast and with more features!!
Good job, and the new CMW with swipping and the fixed SD card issue is also great.Many thanks DEVS!:good:
EDIT:The selectable GAPPS installer has a bug though.When you go to the apps selection screen it flashed and vibrated for like 50 times and then the installation froze...
And with the non removable battery the only thing i could do was press the reset button which seemed to work after a few seconds.

Theorw said:
Just amazing.I installed it now and it looks great, fast and with more features!!
Good job, and the new CMW with swipping and the fixed SD card issue is also great.Many thanks DEVS!:good:
EDIT:The selectable GAPPS installer has a bug though.When you go to the apps selection screen it flashed and vibrated for like 50 times and then the installation froze...
And with the non removable battery the only thing i could do was press the reset button which seemed to work after a few seconds.
Click to expand...
Click to collapse
The gapps issue must be from slimbean team itself, as the gapps is provided by them. I just use the basic slim gapps and works flawlessly for me. I never opt for AIO/aroma gapps.
Anyway, love this rom
Sent from my Slimbeaned Xperia SP

Theorw said:
Just amazing.I installed it now and it looks great, fast and with more features!!
Good job, and the new CMW with swipping and the fixed SD card issue is also great.Many thanks DEVS!:good:
EDIT:The selectable GAPPS installer has a bug though.When you go to the apps selection screen it flashed and vibrated for like 50 times and then the installation froze...
And with the non removable battery the only thing i could do was press the reset button which seemed to work after a few seconds.
Click to expand...
Click to collapse
is not gapps issue, just aroma issue, its also happen when i am using other aroma installation zip like awesomebeats.
not all aroma installation will have this issue though ...

Bug: slow battery charge
Enviado desde mi C5302 usando Tapatalk

nitrunter said:
Bug: slow battery charge
Enviado desde mi C5302 usando Tapatalk
Click to expand...
Click to collapse
Try the other usb cable instead of sony's ec450.
Sent from my C5303 using xda app-developers app

[ROM] [4.4.x] CyanFox Rom [OFFICIAL]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Credit to @vedantgp (me!)
http://www.cyanfox-rom.com/
CyanFox is a light-weight Android 4.4.x custom ROM, which is based on AOSP/Android (4.4) and CyanogenMod (11.0) source bases.
CyanFox features:
- Dark UI mode
- Paranoid Halo notifications
- Screen Recording
- NavBar settings and native enabling
Features in progress:
- Unread notifications count-icons with new 4.4 API for any app/launcher
- Apps sidebar-launcher
- Advanced Recent Apps RAM bar
- Multi-color/alpha status/nav bars
- Network speed indicator in status bar
- List view animations
- More new features coming soon...
https://github.com/CyanFox
https://github.com/CyanogenMod/android_kernel_samsung_jf/tree/cm-1110/kernel
Email us at: [email protected]
Download at http://www.cyanfox-rom.com/downloads/
Please submit bugs to: https://code.google.com/p/cyanfox/issues/list
And feature requests to: http://cyanfox.uservoice.com/forums/220748-general
Help us out!
http://forum.xda-developers.com/donatetome.php?u=5302565
Our current build server:
- 96 GB RAM
- 24 Cores
- 960 TB HDD
Credits to:
Mantas Zilius [MNT]
http://www.cyanfox-rom.com/
https://plus.google.com/u/0/communities/103538505102439103284
Wanna Help?
We need help from designers to help us make our logo and other elements. If you are interested, please follow the link below, made by my friend SystemErrorOne
http://forum.xda-developers.com/showthread.php?t=2484228

Known Issues
Rotation Issues
Nothing else....
Instructions for Installation
[May vary on firmware, i will be vague]
Make sure your handset is on 100% battery
PREREQUISITES:
-Root
-Custom Recovery [CWM/TWRP]
1. Download latest zip file and GAPPS from http://cyanfox-rom.com/downloads/
2. Place these two zip files in the SD of your handset [internal or external]
3. Backup all of your data using Titanium Backup, or any other backup software you might have, as the device will be wiped in the process.
4. Reboot to Recovery by pressing and holding Volume Up and Down while pressing the power button while the device is turned off
5. Perform a factory reset
TWRP
6a. Press Install and guide yourself to where you put your Cyanfox zip file
6b. Press add more zips and guide yourself to where you put the GAPPS zip file
6c. Press Install
CWM
6a. Use volume keys to "Install zip"
6b. Navigate to your cyanfox zip file
6c. Repeat step 6b for Gapps file
If upgrading from a previous version or switching from CM11
6a. Dirty flash
6b. Flash Gapps
7. Wipe Cache
8. Reboot and enjoy
Screenshots
Images are courtesy of @varben
Version numbers subject to change due to OS version
FAQ
"Omigod I'm stuck in a bootloop!"
Code:
Don't panic. Just factory reset and try again...
"I accidentally wiped everything including the internal SD!"
Code:
Just load the ROM onto an SD card and pop it into your phone
"I accidentally wiped everything including the internal SD and i don't have an SD card!"
Code:
adb sideload
"Where can i report bugs?"
Code:
Device specific bugs go to the CyanogenMOD maintainer. Overall bugs come to us
Feel free to post though to see if there is a quick fix, or a workaround
"What does the fox say?"
Code:
ring-a-ding-ding-ding-ding-a-ding
"Why isnt there more FAQ?"
Code:
Not alot of people have encountered issues beyond this... They have been fixed btw...

Interesting
Sent from my Nexus 4 using Tapatalk

spider623 said:
Interesting
Sent from my Nexus 4 using Tapatalk
Click to expand...
Click to collapse
people from the Galaxy S3/4 threads seem to love it. try it.

4.4 or 4.4.2?
Sent from my Nexus S using XDA Premium 4 mobile app

Setting.Out said:
4.4 or 4.4.2?
Sent from my Nexus S using XDA Premium 4 mobile app
Click to expand...
Click to collapse
It's 4.4.2 Faster then any other ROM of kitkat but there is one bug Auto-rotate is not working ..
Hope it will fixed in upcoming Nightlies..

Setting.Out said:
4.4 or 4.4.2?
Sent from my Nexus S using XDA Premium 4 mobile app
Click to expand...
Click to collapse
4.4.2, but that didn't look right when I was making the banner. I put 4.4 trying to cover that too

vedantgp said:
"I accidentally wiped everything including the internal SD!"
Code:
Just load the ROM onto an SD card and pop it into your phone
Click to expand...
Click to collapse
We don't have an external SD slot.
Just use this:
"I accidentally wiped everything including the internal SD!"
Code:
adb sideload
Also, don't know if you manage the site, but if you give me a quick list of additional non-CM features, I can make it look neat for the Features page.

Vuciz said:
We don't have an external SD slot.
Just use this:
"I accidentally wiped everything including the internal SD!"
Code:
adb sideload
Also, don't know if you manage the site, but if you give me a quick list of additional non-CM features, I can make it look neat for the Features page.
Click to expand...
Click to collapse
Whoops sorry. I don't manage the site. The features are listed above in the OP.

Hi @vedantgp,
I have run this great CyanFox Rom for the last 12 hours, it run good overall (except for rotation as mentioned). Very smooth.
Thanks.

I've installed this ROM and it's good but it gets laggy at times and just the rotation, since I love watching video using my phone, it's not favorable. Hehe, well. I'm willing to wait for the fix and will try to get back on it! Thanks for great ROM!

khimois said:
I've installed this ROM and it's good but it gets laggy at times and just the rotation, since I love watching video using my phone, it's not favorable. Hehe, well. I'm willing to wait for the fix and will try to get back on it! Thanks for great ROM!
Click to expand...
Click to collapse
yeah, the rotation is the problem, lag is not an issue with the rom.

status 7
i have got status 7 error

Sharkslyer said:
i have got status 7 error
Click to expand...
Click to collapse
You need to update your recovery in order flash KitKat ROMs. The latest CWM (6.0.4.3) or Philz are the only two that will do it . I recommend Philz.
http://forum.xda-developers.com/nexus-s/development/nexus-s-philz-touch-t2284670

treesurf said:
You need to update your recovery in order flash KitKat ROMs. The latest CWM (6.0.4.3) or Philz are the only two that will do it . I recommend Philz.
http://forum.xda-developers.com/nexus-s/development/nexus-s-philz-touch-t2284670
Click to expand...
Click to collapse
thx

So far, so good!!

cgaston said:
So far, so good!!
Click to expand...
Click to collapse
I have install this one, and it's a great rom.
Actually i think is the best one i have tryed till now.
I have v.2.0.2.
Single problem is the rotate function which works and not
But i have seen that is up a Experimental one launched in 16.01.2014!
Did anyone tryed it? What does bring new?

This is working great for me, the audio is no problem at all. I listen to hell lot of songs. Battery life is great. Yes, occasional lag is expected.
Sent from my Celkon A119Q using Tapatalk

pcoruganti said:
This is working great for me, the audio is no problem at all. I listen to hell lot of songs. Battery life is great. Yes, occasional lag is expected.
Sent from my Celkon A119Q using Tapatalk
Click to expand...
Click to collapse
Buy seeder, it's the entropy
Sent from my Nexus 4 using Tapatalk

New Build
New Build is up..
One bug is still there ..
Auto-rotate bug is still not fixed..

[ROM][N5120]Official CM11.0 Nightlies[KTU84P][4.4.4]

CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4 (KK), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
INSTRUCTIONS
First time installing CyanogenMod 11.0 to your Galaxy Note 8 N5120, or coming from another ROM:
- Read known issues ans FAQs
- Flash the latest official ClockworkMod-Recovery
- Copy GApps and CM11.0 ZIPs to your SDCard
- Boot into Recovery
- Flash CM11.0 zip from SDCard
- Flash GApps zip from SDCard
- DO A DATA WIPE / FACTORY RESET (otherwise your device will be stuck at boot)
- Reboot
- Don't restore system data using Titanium Backup!
- Restoring Apps + Data might cause problems and is not recommended, avoid it if possible!
Upgrading from earlier version of CyanogenMod 11.0:
- Copy CM11.0 ZIP to your SDCard
- Boot into Recovery
- Flash CM11.0 zip from SDCard
- Reboot
BUG LIST
-BT Voice Search
[Nightlies] http://download.cyanogenmod.org/?device=n5120
Recovery(6.0.4.7): Heimdall: http://www.androidfilehost.com/?fid=23329332407567663
[GAPPS 4.4] http://wiki.cyanogenmod.org/w/Google_Apps#Downloads
Outdated
ROM: [2/14/14]:http://www.androidfilehost.com/?fid=23329332407571447
Changes:
-Fix Camera
-Fix Wifi Tether
-Fix Audio Calls
-Fix Microphone/recording
-Upstream CM changes
ROM: [2/5/14]:http://www.androidfilehost.com/?fid=23329332407569162
Changes:
Initial Release
Source:
http://github.com/CyanogenMod

Awesome work thanks
heres the link for the recovery 6.0.4.7 in .tar(odin)
https://www.dropbox.com/sh/pqq8fz99hfj439v/F3VsZe-d6a
Sent from my GT-N5120 using Tapatalk

It might be helpful to manually format /system as well as I encountered a bootloop several times and solved it with the format in recovery.
EDIT: I noticed that e.g. Youtube videos are displayed about 10 times faster than normal what makes it impossible to listen to music or just watch a video. Is this a known issue or shall I make a logcat of that?

WiFi tethering gives an error!!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Battery life superb?
https://www.dropbox.com/s/5xg89vfl2vl4m14/wifi.txt
Hope this log helps
Sent from my GT-N5120 using Tapatalk

panjaby said:
WiFi tethering gives an error!!
Battery life superb?
https://www.dropbox.com/s/5xg89vfl2vl4m14/wifi.txt
Hope this log helps
Sent from my GT-N5120 using Tapatalk
Click to expand...
Click to collapse
Based your last picture and my experience with n5100, I think the light sensor may have problem.
Try to install Andro Sensor and check is it work or not.
Sent from my GT-N5100

Light sensor is working fine just checked. Thanks
Sent from my GT-N5120 using Tapatalk

Well, with that build here the YT problem is fixed. I did not expect fixes since your build a day ago ☺

panjaby said:
WiFi tethering gives an error!!
Battery life superb?
https://www.dropbox.com/s/5xg89vfl2vl4m14/wifi.txt
Hope this log helps
Sent from my GT-N5120 using Tapatalk
Click to expand...
Click to collapse
Can you grab a kernel log? adb shell su -c "cat /proc/kmsg" > kernelog.txt

https://www.dropbox.com/s/zdhewxpngukivrd/kmsg.log
If I've done it properly... Cheers
Sent from my GT-N5120 using Tapatalk

Just loaded the Rom and it can't recognize my SIM anyone have similar issue?
Sent from my HTC One using Tapatalk

Can you see the imei
Sent from my GT-N5120 using Tapatalk

ctrlaltdel said:
Just loaded the Rom and it can't recognize my SIM anyone have similar issue?
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
Sounds like your imei got lost during flash process. Check it as mentioned and if so you hopefully backed it up before flashing the rom.
Written with Tapatalk PRO on my Moto G

iKarlito said:
Sounds like your imei got lost during flash process. Check it as mentioned and if so you hopefully backed it up before flashing the rom.
Written with Tapatalk PRO on my Moto G
Click to expand...
Click to collapse
I flashed back to Sammy base and all work so the imei info should be still there? I also tried to flash different radio but still no joy
Sent from my HTC One using Tapatalk

Well then try to format system and data manually via adb in recovery and do a clean flash from scratch.

iKarlito said:
Well then try to format system and data manually via adb in recovery and do a clean flash from scratch.
Click to expand...
Click to collapse
I wipe all system, data, cache and ad card in the recovery before I flash the Rom, is there any difference do this via adb?
Sent from my HTC One using Tapatalk

ctrlaltdel said:
I wipe all system, data, cache and ad card in the recovery before I flash the Rom, is there any difference do this via adb?
Click to expand...
Click to collapse
in that case
do you have efs backup try restoring if not
might wanna start start troubleshoot from the bottom eg. you are using n5120 rom ( yes sounds dumb but!! )
check md5 of tall the files, re download the rom, dont install gapps at 1st bootup just to make sure.
go to a working rom before reflashing. which recovery are you using.
some of these thing might not have anything to do with the prob but you wanna clear doubts as you proceed.
why dont you pull a logcat and send it to the dev.
id say that start from scratch, wish i could be of more help
best of luck

I am using the recovery provided in the op, other recovery didn't work and gave error.
I dunno logcat can see this problem ? I will give it a go to dump the logcat
panjaby said:
in that case
do you have efs backup try restoring if not
might wanna start start troubleshoot from the bottom eg. you are using n5120 rom ( yes sounds dumb but!! )
check md5 of tall the files, re download the rom, dont install gapps at 1st bootup just to make sure.
go to a working rom before reflashing. which recovery are you using.
some of these thing might not have anything to do with the prob but you wanna clear doubts as you proceed.
why dont you pull a logcat and send it to the dev.
id say that start from scratch, wish i could be of more help
best of luck
Click to expand...
Click to collapse
Sent from my HTC One using Tapatalk

I cant believe it, the battery life is superb. Especially when in standby overnight I lost 1%.
Sent from my GT-N5120 using Tapatalk

ctrlaltdel said:
I flashed back to Sammy base and all work so the imei info should be still there? I also tried to flash different radio but still no joy
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
Try different provider, who knows?

Has anyone actually made and received calls with this rom? I really want to try this but i do need to use my phone daily, so would like to know at least the phone/data/wifi works before flashing.
Thanks
Sent from my GT-N5120 using XDA Premium HD app

[CM11 for Cooperve5830i][Discussion]] Thread for CyanogenMod 11

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Great Devs have been working hard for our little device. Hats off to them.
This thread aims to reduce flooding of queries not related to development in dev threads
so as not to hamper their work.
And hopefully not to flood other devices' forums as well.
Let's discuss here, provide logcats if necessary and report bugs to help the developers.
CyanogenMod 11.0 is a free, community built, aftermarket firmware distribution of Android 4.4.4 KK(),
which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions
from many people within the Android community. It can be used without any need to have
any Google application installed. Linked below is a package that has come from another
Android project that restore the Google parts. CyanogenMod does still include various
hardware-specific code, which is also slowly being open-sourced anyway.
From CM11 Dev thread.
Current issues (06/10/2014)
OMX codecs (for accelerated audio/video - may never be solved)
SIM unlock doesn't work (you must remove your SIM lock in another device/ROM)
Video recorder
First-time installation:
Read first posts of DEV Thread:
1.http://forum.xda-developers.com/showthread.php?t=2766229
ClockworkMod v6 is mandatory to install CM11.
Download the latest full OTA build for cooperve from:
RC9: http://download.androidarmv6.org/_builds/cooperve/stable/
Nightlies: http://download.androidarmv6.org/_builds/cooperve/
Quote of dev: psyke83
"IMPORTANT!!! mandatory recovery
update required for cm11 builds later
than 23/07/2014
IMPORTANT!!!
As of 23/07/2014, all CM11 builds for the
bcm21553 series will be switched over to
the MTD flash drivers. In order for these
packages to work correctly, you must first
flash an MTD-compatible recovery (CWM
v6.0.5.2 or later only).
Don't flash the updated recovery until a)
you've backed up your data, b) the CM11
23/07/2014 build (or later) is available,
and c) you're ready to switch to the MTD
build.
How to update to MTD build:
Download an MTD-compatible recovery
(linked below) and a full CM11 OTA build
dated 23/07/2014 (or later).
Perform a full backup using the old
recovery (mandatory!)
Flash the updated recovery, and reboot
into the new recovery.
In the new MTD recovery, perform a data-
wipe, and manually format /system (this
step is critical in order for your partitions
to be properly converted to the mtd/
yaffs2 format - don't ignore it!)
Flash the CM11 package.
Once you've data-wiped and flashed the
initial MTD build, future CM11 updates
can be installed normally (delta or full
packages, as you desire).
Notes:
Older ROMs will no longer be compatible
with the MTD recovery and yaffs2-
formatted partitions. If you wish to use a
stock/modded Gingerbread ROM, CM7 or
CM9, you should wait until MTD versions
of these ROMs become available.
If you want to go back to a non-MTD
ROM, you must flash an entire stock ROM
(CSC+MODEM+PDA) via Odin, or else
your partitions will be stuck in MTD
format."
###_________________
MTD-COMPATIBLE RECOVERY @Post #308 by lesikvip
###_________________
Some Screens:
Full Screenshots: http://forum.xda-developers.com/showthread.php?p=54014189
Gapps link: http://madteam.co/forum/index.php?topic=6285.0
How to update (via OTA):
Please consult the cm-ota instructions on Jenkins.
Summary of major work done:
Forked broadcomCM devices into androidarmv6 repository (forked from ics branches).
Initial changes needed for cm-11.0 have been committed to cooperve, tassve, totoro and bcm21553-common device trees.
All of Broadcom's code has been adapted for the cm-11.0 branch.
After some reverse engineering of the vendor binaries, "adbd" and "init" built from source now work correctly.
ADB will now set the proper USB mode, can give a root shell, and no longer has a hardcoded dependency on /system/bin/sh,
which should help a great deal with debugging. We also no longer need to use the init prebuilt binary - the source-built version
is now compatible.
Implemented common kernel source for totoro, cooperve and tassve.
Implemented hybrid boot/recovery/charge ramdisk.
Fixed WiFi, Bluetooth, Bluetooth tether & mac addresses.
Fixed graphical performance regression on CM11 branch.
Fixed basic audio (speaker, microphone, software encoders/decoders)
Fixed GPS.
Fixed Gallery, wallpaper chooser, live wallpapers, RenderScript, and possible EGL crashes in other apps
Added workaround for SystemUI corruption
Fixed graphical corruption/stability issues (caused by buggy GL_EXT_discard_framebuffer extension)
Fixed RIL, telephony and audio routing to speakers, headset, earpiece, microphone and microphone mute.
* = this code is work in progress, meaning that it won't be available in OTA builds.

IMPORTANT NOTICES from the dev:
psyke83 said:
OK, I managed to fix routing and volume control while in-call. I've merged the changes and started OTA builds for the three devices, so that you can have a build with working telephony. Enjoy!
To see the build status (to know when they will be available from the updater):
totoro: http://jenkins.androidarmv6.org/job/cm-ota/390
tassve: http://jenkins.androidarmv6.org/job/cm-ota/391
cooperve: http://jenkins.androidarmv6.org/job/cm-ota/392
If telephony doesn't work in the tassve or cooperve builds, try updating to the latest baseband. If that still doesn't work, please send me a radio log:
Code:
adb shell logcat -b radio >radio.log
Click to expand...
Click to collapse
psyke83 said:
Folks,
If you're using Link2SD, Mounts2SD, or want a functional app2sd method, keep reading.
These applications are (IMHO) a little too intrusive to be used on my ROM. The main reason is that the apps install their respective mount scripts in a non-optimal location (/system), which can cause problems when you perform ROM upgrades. Link2SD is particularly egregious, because it overwrites a core system file with its script (/system/bin/debuggerd, which is needed by a system service), and this breaks delta updates.
In the past (for CM7), I always favoured S2E on my devices due to it being a much cleaner app2sd implementation, but it had some problems with corruption due to some (IMHO) unnecessary filesystem tweaks. Additionally, S2E doesn't yet support KitKat/CM11. With these issues in mind, I decided to release a fork of the application (called simple2ext_mod), which is focused on maximizing stability and providing support for CM11 ROMs.
I would strongly suggest that you give this app a try. If you're already using Mount2SD or Link2SD, you'll probably have some problems (as they will leave their mount scripts behind). So, it might be a good idea to do a data-wipe beforehand.
Here's the release thread: http://forum.xda-developers.com/android/apps-games/app-simple2extmod-cyanogenmod-11-t2840295
Click to expand...
Click to collapse

Im pretty sure everybody will use the cm7 and cm9 discussion thread for cm11 too.

Someone tried to install some gapps. Official gapps for cm (small version) can't install. Status 7 (with cwm 6).Banks gapps install ok but always fc's
Enviado desde mi GT-I9300 mediante Tapatalk

Hi, does CM11 required EXT4 file sistem and (or) CM7? I tried to install this on stock rom it's says E:Can't mount /data. Thanks!
Sent from my GT-S5830i using Tapatalk 2

yusrilramadhan said:
Hi, does CM11 required EXT4 file sistem and (or) CM7? I tried to install this on stock rom it's says E:Can't mount /data. Thanks!
Sent from my GT-S5830i using Tapatalk 2
Click to expand...
Click to collapse
You need EXT4 flash it on CM 7.

I have no problem with the stock firmware ask. Also there was an error Error mount / system, but I ignored her and flashed CM11 successfully!)
luilly said:
Someone tried to install some gapps
Click to expand...
Click to collapse
I tried, but all in vain. Flashing by cwm, installs successfully, the phone appears at startup window "Updating Applications", but when the system is running ... no gapps Separately, through the APK file, installs gallery, play store, sync and something else. Play market behaves erratically, often crash.
smbe.

lesikvip said:
I have no problem with the stock firmware ask. Also there was an error Error mount / system, but I ignored her and flashed CM11 successfully!)
I tried, but all in vain. Flashing by cwm, installs successfully, the phone appears at startup window "Updating Applications", but when the system is running ... no gapps Separately, through the APK file, installs gallery, play store, sync and something else. Play market behaves erratically, often crash.
smbe.
Click to expand...
Click to collapse
Wait, did you insert the SIM Card too? Cause it's only show blackscreen when using SIM Card
Sent from my GT-S5830i using Tapatalk 2

Just wanted to thank the developers for great the work.
I have closed my thread for discussion for cm7/cm9/cm10 so this is the new thread for future.
So best of luck to OP for good maintainence of discussion thread.

cooperve/cm-11-20140707-NIGHTLY-cooperve.zip
does this fix the sim card issue for cooperve?

yusrilramadhan said:
Wait, did you insert the SIM Card too? Cause it's only show blackscreen when using SIM Card
Sent from my GT-S5830i using Tapatalk 2
Click to expand...
Click to collapse
No, when you run the sim black screen ..
But the problem with crash on startup with sim solved! Firmware modem part S5360_XXMK1, through Odin.
Addressing 4pda. ru/forum /index.php? showtopic= 585296&view =findpost&p =32722332
Links can not place restrictions on the forum (10 posts)

lesikvip said:
I have no problem with the stock firmware ask. Also there was an error Error mount / system, but I ignored her and flashed CM11 successfully!)
I tried, but all in vain. Flashing by cwm, installs successfully, the phone appears at startup window "Updating Applications", but when the system is running ... no gapps Separately, through the APK file, installs gallery, play store, sync and something else. Play market behaves erratically, often crash.
smbe.
Click to expand...
Click to collapse
Thanks. We Have to Wait for a nightly which could install gapps. Thanka for this hard word guys.
Enviado desde mi GT-I9300 mediante Tapatalk

Screenshots CM11 [GT-S5830i]
Updating...

Can i put these on first post?
Thanks

patrol31 said:
Can i put these on first post?
Thanks
Click to expand...
Click to collapse
Yes, you can! @patrol31

luilly said:
Thanks. We Have to Wait for a nightly which could install gapps. Thanka for this hard word guys.
Enviado desde mi GT-I9300 mediante Tapatalk
Click to expand...
Click to collapse
Ggaps up from the usual 5830, here is the link 4pda.ru/forum/index.php?showtopic=531172&view=findpost&p=28339926. I advise you to remove setupwizard.apk, to avoid mistakes when you first start.

Cm 11 is a bit slow but in airplane mode it is fast
in notification bar it shows no internet connection and emergency calls ( blinking)
I think that is why the phone is slow

lesikvip said:
Ggaps up from the usual 5830, here is the link 4pda. ru / forum / index.php? showtopic = 531172 & view = findpost & p = 28339926. I advise you to remove setupwizard.apk, to avoid mistakes when you first start.
Original 4pda. ru/forum/index.php? showtopic=585296& view=findpost&p=32708265
Click to expand...
Click to collapse
Thanks but Error 404 in anyone link inside. Please, can you upload the gapps?

Gapps link now provided on the first post.

luilly said:
Thanks but Error 404 in anyone link inside. Please, can you upload the gapps?
Click to expand...
Click to collapse
Posted a link to a personal, if you have the opportunity to lay out in the subject as an alternative. Because I have been to most gapps problem.

[ROM][VNS-LX1][6.0.1][UNOFFICIAL] AICP for Huawei P9 Lite

Reserved
WORKING/NOT WORKING
-same as CM

Bugs?

How to delete the fingerprint

Does everything work or are there any bugs?

Raymen03 said:
How to delete the fingerprint
Click to expand...
Click to collapse
Settings > Lockscreen > Fingerprint > *Click on your registered fingerprint in the options* > Delete > *click OK*
Thijs van Hal said:
Does everything work or are there any bugs?
Click to expand...
Click to collapse
Simply put,it has the same bugs as CM(the 2.1MP cam limit and that is that?)

The Marionette said:
Simply put,it has the same bugs as CM(the 2.1MP cam limit and that is that?)
Click to expand...
Click to collapse
How about Bluetooth paring?

Care to elaborate on the difference between this and CM?

Hi,
I have a few questions:
1: Does this work on any P9 Lite variant (i have VNS-L21)?
2: Why is archive so big (almost 700mb)?
3: What Open Gapps package do you recommend to flash?
Tnx
tw1st3d ?

tw1st3d83 said:
Hi,
I have a few questions:
1: Does this work on any P9 Lite variant (i have VNS-L21)?
2: Why is archive so big (almost 700mb)?
3: What Open Gapps package do you recommend to flash?
Tnx
tw1st3d ?
Click to expand...
Click to collapse
1. Yeah,I declared the L"X"1 value to say that it is compatible with both L31 and L21.
2. AICP is "fatter" than CM since it has extra features,so no reason to panic. :silly:
3.I personally use the Pico package and then just install other Google apps which I need. That is the beauty of Open Gapps,you have several options.
Sent from my VNS-LX1 using Tapatalk

The Marionette said:
1. Yeah,I declared the L"X"1 value to say that it is compatible with both L31 and L21.
2. AICP is "fatter" than CM since it has extra features,so no reason to panic. :silly:
3.I personally use the Pico package and then just install other Google apps which I need. That is the beauty of Open Gapps,you have several options.
Click to expand...
Click to collapse
Thanks man for fast answer, the flashing will comence in the morning, i need a straight head for this ?
And sa for archive size i did not panic, just been curious because i had AICP on my galaxy s4 and it was half the size...
AICP rom is one of the best out there and it has sooo much customization options that i almost cry with happyness when i saw this post ?
And one more question: do i use ARM or ARM64 version of gapps?

Huawei P9 Lite have to use ARM64

Potato997 said:
Huawei P9 Lite have to use ARM64
Click to expand...
Click to collapse
Yeah,I thought everyone knew that...
Added it as well to the instructions! xD

@The Marionette thanks for this amazing work. There is some possibility that you can support the VNS-L23 variant? It is practically equal to the L31, with the only differences that do not have NFC support, the bands 4G are different and it has 2GB of RAM. Greetings.

Hey @The Marionette,
I flashed the ROM and i got error that data partition could not be mounted and then when i click to boot in to android the phone boots but it ask for password to start android...
What to do?
EDIT: After rebooting recovery the data partition is mounted again and i did a full wipe then flashed rom and gapps again but after boot in to android it ask for password again...

tw1st3d83 said:
Hey @The Marionette,
I flashed the ROM and i got error that data partition could not be mounted and then when i click to boot in to android the phone boots but it ask for password to start android...
What to do?
EDIT: After rebooting recovery the data partition is mounted again and i did a full wipe then flashed rom and gapps again but after boot in to android it ask for password again...
Click to expand...
Click to collapse
Someone on the question and answer thread had the same problem. See if any of his answers helps.
Sent from my Huawei P9 Lite using XDA Labs

oss_mosis said:
@The Marionette thanks for this amazing work. There is some possibility that you can support the VNS-L23 variant? It is practically equal to the L31, with the only differences that do not have NFC support, the bands 4G are different and it has 2GB of RAM. Greetings.
Click to expand...
Click to collapse
I have the L21 variant and it works fine for me. If CM works on your device,AICP will work as well.
tw1st3d83 said:
Hey @The Marionette,
I flashed the ROM and i got error that data partition could not be mounted and then when i click to boot in to android the phone boots but it ask for password to start android...
What to do?
EDIT: After rebooting recovery the data partition is mounted again and i did a full wipe then flashed rom and gapps again but after boot in to android it ask for password again...
Click to expand...
Click to collapse
Did you follow the instructions or did you do it your own way?
Are you coming from stock?
I think everyone needs to be on CM before flashing.
I flashed it exactly like I described and it booted.
The only downside is that the TWRP goes red(thinks the current ROM is stock) and data can't be mounted. I will look into it.
Sent from my VNS-LX1 using Tapatalk

The Marionette said:
I have the L21 variant and it works fine for me. If CM works on your device,AICP will work as well.
Did you follow the instructions or did you do it your own way?
Are you coming from stock?
I think everyone needs to be on CM before flashing.
I flashed it exactly like I described and it booted.
The only downside is that the TWRP goes red(thinks the current ROM is stock) and data can't be mounted. I will look into it.
Sent from my VNS-LX1 using Tapatalk
Click to expand...
Click to collapse
I followed Meticulus instructions first (did all backups and dump) and then i followed your instructions from OP but i come from stock rom, did not try to install Meticulus CM ROM... So now i managed to get past password screen by formating data partition to FAT and then formating it back to ext4 but now when phone boot i get "Decryption unsuccessful" screen and when i click "reset phone" button it reboots in recovery, wipe cache and then boots up back to "Decryption unsuccessful" screen...
I am downloading now Meticulus build to try with that... Will report back soon...
EDIT: I managed to boot AICP!!! By doing this:
First i updated recovery (did not see that Meticulus pushed V2) then i flashed Meticulus CM build but i got "Decryption failed" screen again but this time when i clicked "reset phone" buton the phone just rebooted to TWRP.
Then i did again full harcore wipe and flashed CM with open gapps and the phone booted in to system without problem, from that point i figure that AICP must work now so i rebooted back to TWRP, did another hardcore full wipe, flashed AICP with Open Gapps micro ARM64 version and the phone finaly booted to AICP :happy: :happy: :happy:
Btw i noticed few thing while doing all this... When i first booted CM my SIM card was not recognized but i figured it needs some time to get the signal or wathever but that never hapend and i cheked camera app and in setting of the app i saw that front and back camera was set to full resolution and the photo i took was really in full (13Mpix) resolution... After checking that and few more things i flashed AICP and at first boot my SIM still not working so i figure i will reboot and after second boot the SIM works again but in this ROM front and back camera are set to 2.1mpix (not a problem for me, just saying for ppl to know)...
Now i am going to play with this awesome ROM!
Thanks @The Marionette
EDIT 2: So after few hours of playing with AICP i been forced to go back to stock because my mobile network gone crazy, every 5-10 minutes it disapear and only reboot helps to get connected again and when network disapears the UI get so much lag that is almost unusable...
I can confirm that other things in ROM work as it should, fingerprint, themes, sound bar, navigation bar customization, lcd density, UI animations customizations etc...
Nice work and keep up the good work! ?

So I am running this ROM on my device since yesterday and I really like it. Seems very stable and allows for a lot of modifications.
It drains a lot of battery while listening to music when the device is locked but I also experienced this on the CM ROM.
I am keeping it on my device for now and am looking forward to new updates

Hello @The Marionette,
May I ask you if you plan to update the AICP ROM with the update from CM? Thank you

Database Develop

welcome