Database Develop

XDAIIs die while upgarding by JAFWM!!!

My xdaIIs is death while upgrading by JAFWM.There was an errors, but I don't know what is it.Now, my XDA is death.I can't enter boot loader.The screen is black, nothing happend when I press the power button or reset.Pls help me!Thank in advance!!!!!!!!!

fantasylovevn said:
My xdaIIs is death while upgrading by JAFWM.There was an errors, but I don't know what is it.Now, my XDA is death.I can't enter boot loader.The screen is black, nothing happend when I press the power button or reset.Pls help me!Thank in advance!!!!!!!!!
Click to expand...
Click to collapse
with blueangel are no problems known. Please post here the flash log so i can see what went wrong.
i think there could be follow problems:
- u had used an older version of JAFWM
- your battery was not fully charged

try charge about 30' then hard reset!

Here's my log files.Pls help me 2 reslove this problem.It's the first time that I broke a PPC phone.
[13:36:12.203] Initializing flasher for BLUEANGEL
[13:36:14.265] ******** Starting Communication ********
[13:36:14.281] GetDeviceIdString
[13:36:14.296] BLUEANGEL
[13:36:15.796] Initializing phone...
[13:36:22.375] Establishing channel...
[13:36:22.390] Creating secure channel...
[13:36:24.156] Secure channel created.
[13:36:29.609] Type: 0, ADDR: 80000000, LEN: 02000000, CRC: 6BF39892
[13:36:29.625] Erase flash......12%...25%...
[13:36:42.718] *** read operation aborted
[13:36:42.718] *** channel read error
[13:36:43.218] Flashing region failed. Starting retry...
[13:36:43.218] Erase flash...
[13:36:43.234] *** channel write error
[13:36:43.250] ERROR: Erase failed (2)
[13:36:43.250] Flashing region failed. Starting retry...
[13:36:43.265] Erase flash...
[13:36:43.281] *** channel write error
[13:36:43.296] ERROR: Erase failed (2)
[13:36:43.296] ERROR: Flashing region error. Giving up.
[13:36:43.312] Type: 0, ADDR: 70010000, LEN: 01070000, CRC: 86F76972
[13:36:43.328] Erase flash...
[13:36:43.343] *** channel write error
[13:36:43.359] ERROR: Erase failed (2)
[13:36:43.375] Flashing region failed. Starting retry...
[13:36:43.375] Erase flash...
[13:36:43.390] *** channel write error
[13:36:43.406] ERROR: Erase failed (2)
[13:36:43.421] Flashing region failed. Starting retry...
[13:36:43.437] Erase flash...
[13:36:43.453] *** channel write error
[13:36:43.468] ERROR: Erase failed (2)
[13:36:43.484] ERROR: Flashing region error. Giving up.

fantasylovevn said:
Here's my log files.Pls help me 2 reslove this problem.It's the first time that I broke a PPC phone.
[13:36:12.203] Initializing flasher for BLUEANGEL
[13:36:14.265] ******** Starting Communication ********
[13:36:14.281] GetDeviceIdString
[13:36:14.296] BLUEANGEL
[13:36:15.796] Initializing phone...
[13:36:22.375] Establishing channel...
[13:36:22.390] Creating secure channel...
[13:36:24.156] Secure channel created.
[13:36:29.609] Type: 0, ADDR: 80000000, LEN: 02000000, CRC: 6BF39892
[13:36:29.625] Erase flash......12%...25%...
[13:36:42.718] *** read operation aborted
[13:36:42.718] *** channel read error
[13:36:43.218] Flashing region failed. Starting retry...
[13:36:43.218] Erase flash...
[13:36:43.234] *** channel write error
[13:36:43.250] ERROR: Erase failed (2)
[13:36:43.250] Flashing region failed. Starting retry...
[13:36:43.265] Erase flash...
[13:36:43.281] *** channel write error
[13:36:43.296] ERROR: Erase failed (2)
[13:36:43.296] ERROR: Flashing region error. Giving up.
[13:36:43.312] Type: 0, ADDR: 70010000, LEN: 01070000, CRC: 86F76972
[13:36:43.328] Erase flash...
[13:36:43.343] *** channel write error
[13:36:43.359] ERROR: Erase failed (2)
[13:36:43.375] Flashing region failed. Starting retry...
[13:36:43.375] Erase flash...
[13:36:43.390] *** channel write error
[13:36:43.406] ERROR: Erase failed (2)
[13:36:43.421] Flashing region failed. Starting retry...
[13:36:43.437] Erase flash...
[13:36:43.453] *** channel write error
[13:36:43.468] ERROR: Erase failed (2)
[13:36:43.484] ERROR: Flashing region error. Giving up.
Click to expand...
Click to collapse
question:
have you used any usb hub?
was your battery fully charged?
have you used last release of jafwm?
how about boot mode?
can u still put your device in boot mode?

I haven't used any USB hub
I'm not sure about my battery before i flash my phone(but it's still remain about >50%),my battery is now fully charged
I've used JAFWM13_beta to flash my phone.
boot ver 1.03
And I can't enter boot mode now, the screen is black, when i plug in my charger into my phone(without the battery)the light is red, but with the battery, the light is off.Help me, I'have break 2 Blue Angel with the same problem because of JAFWM!!!!!!!!!!!!

sbl/boot strings

passing strings to a sbl i got some interesting text:
Code:
-----------------------------------------------------------
Samsung Secondary Bootloader (SBL) v3.0
Copyright (C) Samsung Electronics Co., Ltd. 2006-2010
Board Name: %s %s
ARIES
REV 03
Build On: %s %s
Jul 30 2010
09:53:23
boot_kernel
loadkernel
boot
command_loop
SBL>
%s: parse command error! (%s)
Autoboot (%d seconds) in progress, press any key to stop
Autoboot aborted..
__Re_partition
%s: undefined code for format.
%s: write virtual pit image.
%s: write bootloader images to NAND!
%s: format failed..
Re_partition
%s: magic code(0x%x)
loke_init
%s: file system init failed..
%s: j4fs_open success..
%s: j4fs_open failed..
%s: bye~ bye!
main
%s: booting stop.
%s: booting stop and power off..
I9000XXIL
console=ttySAC2,115200
/mnt/rsv
setting param.serialnr=0x%08x 0x%08x
setting param.board_rev=0x%x
bootmode=2
bootmode=3
setting param.cmdline=%s
argv[%d] : %s
value : %d
Invalide Parameter Name
setenv
valid magic and version 2 ...
invalid magic and version 2 ...
saveenv
save %s, size: %d
param.blk
save %s successfully.
PARAM Rev %d.%d
%s : %d
%s : %s
printenv
load_lfs_parameters
%s valid magic code and version.
load_lfs_parameters invalid magic code and version
boot parameter file does not exist ..
make new boot paremeter file ..
/mnt/rsv
load_debug_level
debug_level.inf
%s reading debug level from file successfully(0x%x).
debug level file does not exist ..
debug level value is incorrect!! Set default level (LOW)..
get_debug_level
%s current debug level is 0x%x.
There're no available commands.
* Help : %s
* Usage : %s
There's no command
Following commands are supported:
* %s
To get commands help, Type "help <command>"
help
Rebooting...
reset
Code:
open
close
erasepart
eraseall
loadkernel
showpart
bbm add partition start
addpart
delpart
savepart
fsr_bml open error
error return value %x
bbm_erase_all
some of them even look like commands, anyone knows if there is some use for this?
in boot.bin:
Code:
-----------------------------------------------------------
Samsung Primitive Bootloader (PBL) v3.0
Copyright (C) Samsung Electronics Co., Ltd. 2006-2010
Error Occurs During Boot. Please ReBoot.
FSR_BML_Init Error
BML_Open Error
BML_GetVolInfo Error
BML_LoadPIEntry Error! Part_ID: %d
+n1stVPN %d
+nPgsPerBlk %d
BML_Read Error
ERROR.. Bootable SBL doesn't exist ..
PBL found bootable SBL: Partition(%d).
The input address don't need a virtual-to-physical translation : %08lx
""DD
UPCH
LPCH
LPCH
UPCH
[B]e-fused[/B]
i wonder what e-fused is for, and if its related to e-fuse: http://en.wikipedia.org/wiki/EFUSE

How did you got this? UART, jtag?

that's a dump of the PBL and SBL from memory into a file, then the Linux "strings" command was run on the file.

I've used search for UPCH and found this thread.
1.
Any idea what UPCH means?
2.
I can't see Thanx button for luismanson...
Maybe my Browser...
Thanx in advance.
Best Regards

Please.
Any news about UPCH?
I need this for JTAG... maybe.
But I don't know what it is...
http://www.ort-jtag.com/blog/?e=10
For instance it is visible in this Video...
But I have an RIFF Box... not ORT... or Medusa seems also to "repair" UPCH...
It seems Bootloader related...
Thanx in advance.
Best Regards

s-off help

i trying to s off i used
HTML:
http://www.youtube.com/watch?v=sri1z_2zzOw
and
HTML:
http://forum.xda-developers.com/showthread.php?t=2314582&nocache=1
and getting this error
revone failed (error code = 1)
1|[email protected]:/data/local/tmp #

seanpx said:
i trying to s off i used
HTML:
http://www.youtube.com/watch?v=sri1z_2zzOw
and
HTML:
http://forum.xda-developers.com/showthread.php?t=2314582&nocache=1
and getting this error
revone failed (error code = 1)
1|[email protected]:/data/local/tmp #
Click to expand...
Click to collapse
and
HTML:
http://www.youtube.com/watch?v=J4BWxtjaamM

seanpx said:
and
HTML:
http://www.youtube.com/watch?v=J4BWxtjaamM
Click to expand...
Click to collapse
Just used the search option and found 21 threads.................

Cannot Connect to app? request failed [errorCategory=1, errorCode=2]

Trying to get this guys code example to run. I can send the app to my phone and see my chromecast. When I connect, I get the following error message:
StartSessionTask failed with error: failed to start application request failed
chromecast: route seesion start failed: errorCategory=1; errorCode=2
Error: failed to start application: request failed [errorCategory=1, errorCode=2]
LINK i.imgur.com/YnoyMEC.png
I'm following this guys REALLY awesome tutorial. Code is well documented and readable for any one else looking to get started.
chromecastlab.com/2013/11/06/hello-chromecast

Help with identifier token

can someone help me... when i do the exact instructions from htc it says to enter <<<< identifier token start >>>> but it keeps giving me an error << was unexpected at this time

What error are you getting?