Hello XDA forums,
I really don't like the issue of trying to set the drivers of fastboot/google and so on....also all of these adb commands.
Is there a way to unlock bootloader & root by:
1) one of these "1 click" tools that do everything for the use? (such as "wugfresh Nexus Root Toolkit")
2) Just do everything by the phone? (if there is a possible to install some how a recovery such as twrp and than root by some app?)
Could anybody guide me through the steps, if needed?
Many thanks!
shabydog said:
Hello XDA forums,
I really don't like the issue of trying to set the drivers of fastboot/google and so on....also all of these adb commands.
Is there a way to unlock bootloader & root by:
1) one of these "1 click" tools that do everything for the use? (such as "wugfresh Nexus Root Toolkit")
2) Just do everything by the phone? (if there is a possible to install some how a recovery such as twrp and than root by some app?)
Could anybody guide me through the steps, if needed?
Many thanks!
Click to expand...
Click to collapse
AFAIK you will need a pc to 1)unlock your bootloader and 2)flash TWRP. After that the rest can be done locally. I also never used any toolkit. Making it easy is making it more dangerous IMHO.
Droidphilev said:
I also never used any toolkit. Making it easy is making it more dangerous IMHO.
Click to expand...
Click to collapse
Second that.
shabydog said:
2) Just do everything by the phone? (if there is a possible to install some how a recovery such as twrp and than root by some app?)
Click to expand...
Click to collapse
So at least once you need to connect your phone to a desktop computer. It can be practically running anything, within reason of course: Wiindows. Mac OSX, Linux (almost any distro).
You need to unlock your bootloader with one command, but a warning here: Unlocking the bootloader will erase everything from your phone..
Then you need to install a custom recovery, preferably TWRP. After that everything can be done from the phone itself. Well at least until you soft brick it somehow, then you'll might have to use the PC again.
Also two things:
1. No OTAs for rooted phones
2. Don't lock your bootloader if you want to mess with it, because with a locked bootloader, and Enable OEM Unlocking set to off, and without TWRP, if you soft brick it accidentally, you are boned.
Hello XDA forums,
I really don't like the issue of trying to set the drivers of fastboot/google and so on.
Is there a way to unlock bootloader & root by:
1) one of these "1 click" tools that do everything for the use?
2) Just do everything by the phone? (if there is a possible to install some how a recovery such as twrp and than root by some app?)
Could anybody guide me through the steps, if needed?
And i really prefer to do it on the device and not by ADB commands.
@istperson
I dont want to mess with th BL ... only for installing dev roms (or later then the stock with root).
Many thanks!
shabydog said:
@istperson
I dont want to mess with th BL ... only for installing dev roms (or later then the stock with root).
Many thanks!
Click to expand...
Click to collapse
Well, you still will have to unlock it, if you want root, or want to flash a custom recovery.
Sent from my Nexus 6 running cyosp using Tapatalk
shabydog said:
......I really don't like the issue of trying to set the drivers of fastboot/google and so on!
Click to expand...
Click to collapse
Than do not 'root' your phone.
hi xda.. i want to root my phone but dont want to touch it. is there a way to root my n6 without touching it? :silly:
simms22 said:
hi xda.. i want to root my phone but dont want to touch it. is there a way to root my n6 without touching it? :silly:
Click to expand...
Click to collapse
Ha ha, or I don't want my birthday to be on the day I was born every year ?
I can recommend the NTRT, the Nexus Telepathic Rooting Tools.
OK.
I want to do that with a toolkit, only bcs it install the drivers.
What Is the most recommended and easiest to use?
I do looking for the 1 click do all.
Does NTRT do that?
Thank you all.
we are eventually goung to have a "my n6 is bricked, how do i fix it with one click" thread here. seriously though, thats what happens when you use toolkits, but do no real research about modding your device.
Toolkits are fine if you first understand what they are doing. Otherwise it's like giving a hand grenade to a child to play with.
Sent from my Nexus 6 using Tapatalk
shabydog said:
Could anybody guide me through the steps, if needed?
Click to expand...
Click to collapse
<prev> step <next>
simms22 said:
seriously though, thats what happens when you use toolkits, but do no real research about modding your device.
Click to expand...
Click to collapse
I seriously belive that if a user know exactly for to chose and click - yes it could be great.
wtherrell said:
Toolkits are fine if you first understand what they are doing. Otherwise it's like giving a hand grenade to a child to play with.
Click to expand...
Click to collapse
It is fairly enough to read directions and slowly-slowly.
NLBeev said:
<prev> step <next>
Click to expand...
Click to collapse
Thanks!
==========================================================
Bottom line:
Guess many users completed the unlocking & rooting by this tool
Why not?
shabydog said:
I seriously belive that if a user know exactly for to chose and click - yes it could be great.
Click to expand...
Click to collapse
i agree with you. if there is somebody who knows the ins and outs already, a one click root would be great. and there will be. problem is that marshmallow just came out, and a few things have changed, like like yoe also need a custom kernel to have root on marshmallow.
shabydog said:
I seriously belive that if a user know exactly for to chose and click - yes it could be great.
It is fairly enough to read directions and slowly-slowly.
Bottom line:
Guess many users completed the unlocking & rooting by this tool
Why not?
Click to expand...
Click to collapse
There is a reason you're pushing this topic, and I'm quite sure it's because you would feel safer, if there was a tool that did the scary things instead of you. Well, there's no such tool. If you were willing to search XDA, you would find out that the first two weeks after Marshmallow came out were about people bricking their Nexus 6s with toolkits. Then the toolkit got updated and suddenly it knew that is has to flash a modified boot.img too for the root not to brick the phone. But for two weeks it didn't know, because it wasn't necessary for Lollipop. And it will only work until the next security update comes out. And that's once a month.
Meanwhile those who were willing to use the search function, and learned the five minute procedure, were able to update their rooted phones to the next security update and were able to root it as soon as the new modified boot image came out.
And this above is not something somebody will put in a help, or instructions for future updates.
Actually, this is my first time and I was able to do it pretty easily.
fastboot devices
fastboot oem unlock
my bootloader was unlocked within 30 seconds of turning it on.
then, you can easily root via CF Auto root. Just put it into fastboot then doubleclick on the windows, then root, etc....
or.............go into fastboot flash recovery twrpxxxx.img, then it always offers to run SuperSU, and you get custom recovery and root at the same time, etc......
actually the biggest pain is unlocking the bootloader. My Galaxy S4 already was unlocked, so all I did was use goomanager, flash TWRP which always offers to run SuperSU if you don't have it.
Pretty easy, I did unlock bootloader, root, and custom recovery in 10 min.
---------- Post added at 01:48 AM ---------- Previous post was at 01:44 AM ----------
............................Then I got sick of stock Google's ROM in 15 min and wiped it and put a custom ROM instead.
Thank you all so much...
@mikeprius
Thank you so much for the info'!
But, could you plz write more details? such as:
1. How did you installed the drivers? (from my expirience, many times the pc dosent install this easily).
I just need the Google oem driver and that's it?
2. When drivers was set - did you made anything in your phones settings? Which?
3. What did you had to do before pushing the files? (Like...put all the files in the same folder? *which files?)
4. And then entered to fastboot mode and typed in these commands in pc:
fastboot devices
fastboot oem unlock
Regarding your last sentence ("or...."):
If i just flash the recovery via fastbot mode I can enter to twrp recovery and it offers to flash the SuperSU?
Sounds to me the best option.
Thanks!
1. The drivers were set from a previous device, so I didn't have to set them, but they can be downloaded and set though.
2. You need to enable developer options and select OEM unlock and USB debugging.
3. I didn't push the files, I just had them on my computer and ran fastboot commands.
4. Those commands are to unlock the bootloader.
There are a lot of different ways to do the same thing (Root, custom recovery, unlock bootloader)
1. Run CF Auto Root on a locked bootloader. It will unlock it automatically (Chainfire has it set that way), root, then download Flashify app and flash the latest img of TWRP.
2. Run fastboot commands to manually unlock the bootloader, flash TWRP, then use TWRP's SuperSU which will root it.
3. Run fastboot commands to unlock bootloader, run CF Autoroot which will root and load SuperSU, then flash TWRP via Flashify or fastboot.
There are many different ways to do the same thing. I actually just googled youtube videos and watched them.
TWRP has SuperSU and root built in. TWRP knows if you don't have it and offers to load it for you.
I went the scenic route just because, but presumably you can achieve all (3) using Option #1 without having to deal with fastboot, adb, etc.....Chainfire's script runs automatically.
I realy try to help people but users that run into problems because of the usage of tookits (and innability to solve problems and/or even lack the most basic knowledge needed) should ask the toolkit dev. for support imo, and not boughter users that have invested time and effort to gain that knowledge to clean up their mess. Period
Related
I see Chainfire uploaded the nexus 6 flashable image today to root the nexus. Found it here. http://autoroot.chainfire.eu/
With that being said this is my first nexus device I have always been on the note series. Could someone give me step by step instuctions on how too root the nexus 6 and how to unroot it? Bring it back to 1000% stock? THANKS!
Well since you already found autoroot. All you really need to do is download the zip and execute the files corresponding to your Operating System. Everything is included in there, it will simply unlock your bootloader and then root your phone.
100% Stock... https://developers.google.com/android/nexus/images -- download shamu and do the same thing there.
Unroot.. just remove SuperSU and its binaries.
zephiK said:
Well since you already found autoroot. All you really need to do is download the zip and execute the files corresponding to your Operating System. Everything is included in there, it will simply unlock your bootloader and then root your phone.
100% Stock... https://developers.google.com/android/nexus/images -- download shamu and do the same thing there.
Unroot.. just remove SuperSU and its binaries.
Click to expand...
Click to collapse
Wow dude! This is super easy compared to smasungs note using ondon. Worrying about knox flags ect ect. Samsung im done! Hello Nexus =D
How do I lock the bootloader again tho and go back to stock one? Chainfire's file unlocked it but how do you relock it?
cwwjr1681 said:
Wow dude! This is super easy compared to smasungs note using ondon. Worrying about knox flags ect ect. Samsung im done! Hello Nexus =D
Click to expand...
Click to collapse
Thats the joy of devices with a unlockable bootloader. The process is fairly simple and easy to do Toolkits aren't present at this time, but its very easy to do without toolkits that I encourage people to manually root their N6 as it isn't a long process when compared to other phones such as Samsung.
removed.
zephiK said:
Thats the joy of devices with a unlockable bootloader. The process is fairly simple and easy to do Toolkits aren't present at this time, but its very easy to do without toolkits that I encourage people to manually root their N6 as it isn't a long process when compared to other phones such as Samsung.
Click to expand...
Click to collapse
Just so I make sure I am on par here. Bricking devices are never fun.. What do I need to do step by step to root my nexus 6 using the file from Chainfire I downloaded?
Next what do I need to do step by step to relock my bootloader and go back to 100% stock now that I know where to get the stock image?
Am I going to need to install the android SDK? Or can I do this all from within windows? if I need the kit so do I just follow this video? https://www.youtube.com/watch?v=WEof4Rnh4oM&hd=1
Thanks in advance
cwwjr1681 said:
Just so I make sure I am on par here. Bricking devices are never fun.. What do I need to do step by step to root my nexus 6 using the file from Chainfire I downloaded?
Next what do I need to do step by step to relock my bootloader and go back to 100% stock now that I know where to get the stock image?
Am I going to need to install the android SDK? Or can I do this all from within windows? if I need the kit so do I just follow this video? https://www.youtube.com/watch?v=WEof4Rnh4oM&hd=1
Thanks in advance
Click to expand...
Click to collapse
You don't need a step-by-step.. if you're using Windows, double click the file that says windows then a window will pop up and do all the work for you.
If you want to relock your bootloader, simply just type fastboot oem lock. Please google search this stuff, even though its not Nexus 6 specific. The Nexus 5 or 4 or Galaxy Nexus threads will show you how to relock your bootloader as they're the same in terms of bootloader unlocking/locking.
Stock image.... I already linked you that.
Android fastboot etc are already included in the Auto Root zip.
Please don't overthink this, its fairly easy to do
zephiK said:
You don't need a step-by-step.. if you're using Windows, double click the file that says windows then a window will pop up and do all the work for you.
If you want to relock your bootloader, simply just type fastboot oem lock. Please google search this stuff, even though its not Nexus 6 specific. The Nexus 5 or 4 or Galaxy Nexus threads will show you how to relock your bootloader as they're the same in terms of bootloader unlocking/locking.
Stock image.... I already linked you that.
Android fastboot etc are already included in the Auto Root zip.
Please don't overthink this, its fairly easy to do
Click to expand...
Click to collapse
Thank you! So I guess I will need the android SDK installed to go back to stock and lock the bootloader but not to root the device. TY
cwwjr1681 said:
Thank you! So I guess I will need the android SDK installed to go back to stock and lock the bootloader but not to root the device. TY
Click to expand...
Click to collapse
It could be possible you can execute the commands in the folder that consist of fastboot.exe. I wouldn't see why not assuming you have the drivers and whatnot installed.
There honestly is no point in relocking the bootloader though, just leave it unlocked. Having the bootloader locked causes too many problems if you decide to root again. Only point in relocking the bootloader is for warranty purposes.
zephiK said:
Thats the joy of devices with a unlockable bootloader. The process is fairly simple and easy to do Toolkits aren't present at this time, but its very easy to do without toolkits that I encourage people to manually root their N6 as it isn't a long process when compared to other phones such as Samsung.
Click to expand...
Click to collapse
Just heard that Wugfresh has updated his popular tool kit to include Nexus 6.
wtherrell said:
Just heard that Wugfresh has updated his popular tool kit to include Nexus 6.
Click to expand...
Click to collapse
I don't endorse using toolkits. Its already easy to do without one plus by using a toolkit you don't learn the skills of using adb/fastboot which is very important. See http://forum.xda-developers.com/galaxy-nexus/general/dangers-tool-kits-one-click-root-t1469909 for full details.
zephiK said:
I don't endorse using toolkits. Its already easy to do without one plus by using a toolkit you don't learn the skills of using adb/fastboot which is very important. See http://forum.xda-developers.com/galaxy-nexus/general/dangers-tool-kits-one-click-root-t1469909 for full details.
Click to expand...
Click to collapse
I started with a toolkit. Worked fine. Then my natural curiosity led me to learn adb/fast boot, which I prefer. For some, however, a good tool kit is a godsend. You probably still use ms Dos, python scripts, etc. for some things as do I. For a beginner, though, it can help to show them the awesomeness of Android with the freedom of an unlocked bootloader. Then the serious ones will likely stick around and gravitate to finding out how it all works.
I never rooted my N5 or even unlocked the bootloader, first Android that I never Rooted! It's been over a year since I've done any type of root so I feel like I've never done it! So please excuse my noobness in this but....
When I get my phone in hand, is this the very first thing I should do before even setting anythign up??
Instructions:
Step 1: Download the CF-Auto-Root zip file and extract the contents to a folder. We prefer placing these files on the desktop for easier access.
Step 2: Power off your Nexus 6, and boot the device into bootloader mode. To do so, hold down the Volume Down button and the Power button.
Step 3: Once you see the “Restart bootloader” message on the phone, let go of the keys and tap “Restart bootloader” to enter bootloader mode.
Step 4: Plug in the Nexus 6 to the PC or Mac and navigate to the location of the extracted contents.
Step 5: Now we need to run the automated root script.
For Windows:
Simply run the “root-windows.bat” file.
Jeimygirl said:
I never rooted my N5 or even unlocked the bootloader, first Android that I never Rooted! It's been over a year since I've done any type of root so I feel like I've never done it! So please excuse my noobness in this but....
When I get my phone in hand, is this the very first thing I should do before even setting anythign up??
Instructions:
Step 1: Download the CF-Auto-Root zip file and extract the contents to a folder. We prefer placing these files on the desktop for easier access.
Step 2: Power off your Nexus 6, and boot the device into bootloader mode. To do so, hold down the Volume Down button and the Power button.
Step 3: Once you see the “Restart bootloader” message on the phone, let go of the keys and tap “Restart bootloader” to enter bootloader mode.
Step 4: Plug in the Nexus 6 to the PC or Mac and navigate to the location of the extracted contents.
Step 5: Now we need to run the automated root script.
For Windows:
Simply run the “root-windows.bat” file.
Click to expand...
Click to collapse
Your steps are correct. However, when you Power on the phone with volume down + power there is no need to go to restart bootloader because you'll already be in bootloader mode.
For me, I did those same steps as you but I also had to install the USB drivers while in fastboot because auto root wasn't detecting my phone in bootloader mode.
Sent from my Nexus 6 using Tapatalk
zephiK said:
Your steps are correct. However, when you Power on the phone with volume down + power there is no need to go to restart bootloader because you'll already be in bootloader mode.
For me, I did those same steps as you but I also had to install the USB drivers while in fastboot because auto root wasn't detecting my phone in bootloader mode.
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
OK I have unlocked. Anything else I should do for now? Or am I good to start setting up my phone?
Jeimygirl said:
OK I have unlocked. Anything else I should do for now? Or am I good to start setting up my phone?
Click to expand...
Click to collapse
You're good, you can root your phone and all that jazz if you wish to do so.
Do we know if unlocking root etc trips any sort of counter? I know moto had counters in the past, but I'm coming from verizon's screw you samsung knox bull****, so you understand why I ask.
soupaloup said:
Do we know if unlocking root etc trips any sort of counter? I know moto had counters in the past, but I'm coming from verizon's screw you samsung knox bull****, so you understand why I ask.
Click to expand...
Click to collapse
No counters, the device is developed to have people tinker with their devices.
zephiK said:
No counters, the device is developed to have people tinker with their devices.
Click to expand...
Click to collapse
Didn't the Nexus 5 have a tamper flag??
http://www.android-hilfe.de/attachm...factory-restore-werkseinstellung-tampered.png
That shows what I am talking about. I would think this device would be no different.
joderme said:
Didn't the Nexus 5 have a tamper flag??
http://www.android-hilfe.de/attachm...factory-restore-werkseinstellung-tampered.png
That shows what I am talking about. I would think this device would be no different.
Click to expand...
Click to collapse
Correct, the N5 has one but it can be reset, with the 6, it also has a counter but we don't know yet if it can be reset.
I just got my N6 a few days ago, and JUST got everything all set up how I like. I went to go root it, and the method mentioned in the "All-In-One" stickied thread requires you to unlock the bootloader, which says it will factory reset the device.
I don't want to factory reset at this point, I just want to root it. I've never had to wipe a phone or unlock a bootloader to root a phone before, so this is new to me.
Thanks
arcooke said:
I just got my N6 a few days ago, and JUST got everything all set up how I like. I went to go root it, and the method mentioned in the "All-In-One" stickied thread requires you to unlock the bootloader, which says it will factory reset the device.
I don't want to factory reset at this point, I just want to root it. I've never had to wipe a phone or unlock a bootloader to root a phone before, so this is new to me.
Thanks
Click to expand...
Click to collapse
There is a way, I believe, by running TWRP on your PC and flashing SuperSU from your PC. However, it's not a recommended method as you will have no way of backing up. Also, if you get caught in a bootloop, you won't be able to recover without a custom recovery.
arcooke said:
I just got my N6 a few days ago, and JUST got everything all set up how I like. I went to go root it, and the method mentioned in the "All-In-One" stickied thread requires you to unlock the bootloader, which says it will factory reset the device.
I don't want to factory reset at this point, I just want to root it. I've never had to wipe a phone or unlock a bootloader to root a phone before, so this is new to me.
Thanks
Click to expand...
Click to collapse
and you don't have to "hack" a nexus as well, as google provided an easy way to unlock your bootloader and to obtain root. if you just got your nexus a few days ago, just unlock the bootloader and root it. loosing a few days of information is more than worth it for root. don't waste your time worrying over a few days of data.
Can be done but not recommended.
adb backup/restore can save a little bit of information for you, but I wouldn't go in expecting it to save everything
Sent from my Nexus 6
What did you set up? You can back up your messages, and your apps will re-download. Your photos are already syncing to Google. If it's not rooted, I can't imagine you've done that much customization.
Lesson learned: unlock should ALWAYS be the very first step you do on a new phone.
arcooke said:
I just got my N6 a few days ago, and JUST got everything all set up how I like. I went to go root it, and the method mentioned in the "All-In-One" stickied thread requires you to unlock the bootloader, which says it will factory reset the device.
I don't want to factory reset at this point, I just want to root it. I've never had to wipe a phone or unlock a bootloader to root a phone before, so this is new to me.
Thanks
Click to expand...
Click to collapse
if you download kingroot from the internet and install it onto your phone through unknown sources. it says your not supported but just click start root anyway. and hey presto your rooted. ive done this on my nexus 6 and its worked and hasnt knackered the phone and i know a couple of other people whove done the same
the only thing i havnet worked out how to do is take the king userr off. once your finished rooting, in order to sustain root that app becomes a permanent addittion to the phone. ive deleted it before and lost root. but just reinstall and follow the steps again and you gain root again
to check root download root checker form the app market
danr93 said:
if you download kingroot from the internet and install it onto your phone through unknown sources. it says your not supported but just click start root anyway. and hey presto your rooted. ive done this on my nexus 6 and its worked and hasnt knackered the phone and i know a couple of other people whove done the same
the only thing i havnet worked out how to do is take the king userr off. once your finished rooting, in order to sustain root that app becomes a permanent addittion to the phone. ive deleted it before and lost root. but just reinstall and follow the steps again and you gain root again
to check root download root checker form the app market
Click to expand...
Click to collapse
Yes we're aware but we do recommend against these one-click methods usually. Rooted users cannot accept OTA updates, so the only way to update is with an unlocked bootloader unless you're going to have a custom recovery (also highly recommended) so you can flash flashable zips.
Also you MUST go into settings and enable the "Allow OEM unlock" in developer options, because If you break your OS with root, which is easily done - you're going to become stuck as you can't unlock the bootloader. Not too bad if you have TWRP recovery installed, but then that becomes a single point of failure.
danarama said:
Yes we're aware but we do recommend against these one-click methods usually. Rooted users cannot accept OTA updates, so the only way to update is with an unlocked bootloader unless you're going to have a custom recovery (also highly recommended) so you can flash flashable zips.
Also you MUST go into settings and enable the "Allow OEM unlock" in developer options, because If you break your OS with root, which is easily done - you're going to become stuck as you can't unlock the bootloader. Not too bad if you have TWRP recovery installed, but then that becomes a single point of failure.
Click to expand...
Click to collapse
ok thats fair enough i didnt realise it was so risky. i downloaded twrp straight after this method worked for me and got everything backed up
danr93 said:
ok thats fair enough i didnt realise it was so risky. i downloaded twrp straight after this method worked for me and got everything backed up
Click to expand...
Click to collapse
Good stuff. Once rooted, Flashify is a great tool to flash TWRP. With the nexus 5, you could unlock the bootloader with an app that didnt wipe everything, which was great, but Nexus 6 doesn't allow that, but always do go to settings > developer options > OEM Unlock (Set to enable). Without this set, you cannot unlock the bootloader from fastboot. Also, side note, developer options doesn't show up until you go into Settings > About phone then tap "Build number" several times to make the option visible. Think its 7 times.
It's interesting saying that you need kingroot to remain on the device. Thats a bit of a pain. Does it install SuperSU or not? If not, might be interesting to see what happens if you install the SuperSU app from Play - whether it allows it to be removed then.
My preferred method however is definitely unlock the BL, fastboot flash TWRP, From TWRP flash SuperSU zip (or rooted ROM).
For the record, I did end up factory resetting to do it the right way.
Is this easy to unroot if a new OTA update comes out?
arcooke said:
For the record, I did end up factory resetting to do it the right way.
Is this easy to unroot if a new OTA update comes out?
Click to expand...
Click to collapse
Yes and no. To "unroot" you have to fastboot flash system.img and boot.img, which if the factory image is available for the version your OTA will raise you to, you're done. If there is no factory image for that new version, you must flash the system and boot(and recovery) of the expected version, then OTA. Note, recovery version isn't checked. Only system and boot. Just that recovery must be stock for OTA to flash.
To be honest, easiest way is to wait for a rooted flashable zip to be made available and flash via recovery
danarama said:
Yes and no. To "unroot" you have to fastboot flash system.img and boot.img, which if the factory image is available for the version your OTA will raise you to, you're done. If there is no factory image for that new version, you must flash the system and boot(and recovery) of the expected version, then OTA. Note, recovery version isn't checked. Only system and boot. Just that recovery must be stock for OTA to flash.
To be honest, easiest way is to wait for a rooted flashable zip to be made available and flash via recovery
Click to expand...
Click to collapse
Geez. I thought the "pure google experience" would be much less of a headache. lol. Rooting/updating/etc was so much easier on my old Verizon phones.. one-click-root, one-click-unroot, easy updates, never had to factory reset or flash roms to do anything.
I only rooted for AdAway, starting to wonder if that was a good idea or not.
arcooke said:
Geez. I thought the "pure google experience" would be much less of a headache. lol. Rooting/updating/etc was so much easier on my old Verizon phones.. one-click-root, one-click-unroot, easy updates, never had to factory reset or flash roms to do anything.
I only rooted for AdAway, starting to wonder if that was a good idea or not.
Click to expand...
Click to collapse
That's lollipop for you. It changed everything.
It's still really simple.
Good to know. Thanks for the info!
Ive uploaded a fully working root method of kingoroot that roots the nexus 5 on 5.1.1 LMY48B firmware
I have used it myself with uk stock nexus 5 and all works just thought i would upload so other people can benefit from this instead of using a pc enjoy
anyone tested this yet? i am to scared to try xD
thankyoumr said:
anyone tested this yet? i am to scared to try xD
Click to expand...
Click to collapse
working fine.. tested by me
Yes, this can also root from COMPLETE stock without the need of a computer of any kind. May want to add that to thread title if possible to let others know it can be used to root LMY48B(At Least) without the need of a computer to unlock bootloader first and without the need of a custom recovery first. Just install Kingroot then use KingUser(I Believe That Is The Super User App It Installs, Do NOT Install Another SuperUser App Yet Until After Custom Recovery Installed) and use KingUser to allow custom recovery App permissions to install recovery then use that recovery to install SuperUser binaries properly.
Sent from my Nexus 5 using Tapatalk
Why? It's a Nexus.
fastboot oem unlock
flash supersu zip file.
GldRush98 said:
Why? It's a Nexus.
fastboot oem unlock
flash supersu zip file.
Click to expand...
Click to collapse
He just said why on the first post...lol
So you dont need a pc
Its just an easier method if you ask me and for unlocking bootloader you just need to download the nexus 5 unlock bootloader app from google play to unlock bootloader then just install twrp manager from google play and theres your root bootloader unlock and custom recovery but thats upto the user as other people do it there way
It's remarkable what I'm willing to download and install from XDA sometimes.
Anyway, it certainly rooted my device without needing to hook it up to a PC. Threw two "this is bypassing android security" messages. Hope it didn't do anything else :/
---------- Post added at 09:57 PM ---------- Previous post was at 09:37 PM ----------
This also leaves you with an app called Kinguser, which is used to grant root permission to other apps, which can't be removed.
I think I'll feel better if I wipe and start over...
---------- Post added at 09:57 PM ---------- Previous post was at 09:57 PM ----------
This also leaves you with an app called Kinguser, which is used to grant root permission to other apps, which can't be removed.
I think I'll feel better if I wipe and start over...
All you do is use KingUser to grant permission to TWRP Manager to install TWRP and then use SuperSU to install SU through recovery THEN you can easily use SuperSU to grant permissions to any app that'll allow you to remove KingUser. That way you always have an app that can grant SU at all times without going ANY time at all without a SuoerUser app
EPayne123 said:
All you do is use KingUser to grant permission to TWRP Manager to install TWRP and then use SuperSU to install SU through recovery THEN you can easily use SuperSU to grant permissions to any app that'll allow you to remove KingUser. That way you always have an app that can grant SU at all times without going ANY time at all without a SuoerUser app
Click to expand...
Click to collapse
Tried that but SuperSU kept failing to install. Ended up just wiping and going from scratch. The whole Kingroot sending data home to a server just didn't sit well with me. I know they've addressed that they do it to keep track of success rates and don't collect any personal data.
rbrenart said:
Tried that but SuperSU kept failing to install. Ended up just wiping and going from scratch. The whole Kingroot sending data home to a server just didn't sit well with me. I know they've addressed that they do it to keep track of success rates and don't collect any personal data.
Click to expand...
Click to collapse
Failed to install returning SuperSU?
Will this wipe all data the way unlocking the bootloader does?
Sent from my Nexus 5 using Tapatalk 2
ddimple4 said:
Will this wipe all data the way unlocking the bootloader does?
Sent from my Nexus 5 using Tapatalk 2
Click to expand...
Click to collapse
No, wiping data only happens when you unlock bootloader through the bootloader. . . not through the OS. I believe only of you use the Farnborough method instead of manually doing so inside of OS
Sent from my Nexus 5
My friend has nexus 5 tmobile. Will this work? If so any additional steps?
Hi. I'm a newbie in root matter. My nexus 5 is already in LMY48b 5.1.1. Hong Kong stock ROM. So far there's only one reason I want to root it, it is to let some call recorder apps to record incoming voice clearly. So at this stage I don't need to flash any custom ROM. I dug for a certain time of course I can find many teaching how to root, but most of them look like it involves many procedures, many terms or apps, unlock bootloader, android SDK, twrp, custom recovery, etc... it makes me so scared even to give it a try. Until I saw this thread and I think the kingroot app probably the simplest one for my case! In fact I can get it done with a Chinese root way, it's also very simple but I also heard that most likely there's spyware inside so I leave it.
So what I want to make sure is my thought above is it correct? I try not to annoy you guys, any answer simply either yes or no is appreciated. Of course if you guys want to tell me more it is most welcome.
我從使用 Tapatalk 的 SM-T700 發送
lookgod88 said:
Hi. I'm a newbie in root matter. My nexus 5 is already in LMY48b 5.1.1. Hong Kong stock ROM. So far there's only one reason I want to root it, it is to let some call recorder apps to record incoming voice clearly. So at this stage I don't need to flash any custom ROM. I dug for a certain time of course I can find many teaching how to root, but most of them look like it involves many procedures, many terms or apps, unlock bootloader, android SDK, twrp, custom recovery, etc... it makes me so scared even to give it a try. Until I saw this thread and I think the kingroot app probably the simplest one for my case! In fact I can get it done with a Chinese root way, it's also very simple but I also heard that most likely there's spyware inside so I leave it.
So what I want to make sure is my thought above is it correct? I try not to annoy you guys, any answer simply either yes or no is appreciated. Of course if you guys want to tell me more it is most welcome.
我從使用 Tapatalk 的 SM-T700 發送
Click to expand...
Click to collapse
may be you can try the nexus toolkit, http://www.wugfresh.com/nrt/
beware that when unlock the bootloader all data will lost (factory reset), you can use something like helium to make a backup first (for back app data)
DummyPLUG said:
may be you can try the nexus toolkit, http://www.wugfresh.com/nrt/
beware that when unlock the bootloader all data will lost (factory reset), you can use something like helium to make a backup first (for back app data)
Click to expand...
Click to collapse
Hi dummyplug, thank you for your reply and your referring. But I actually don't need to flash ROM, that's why I thought that I don't need to unlock the bootloader either. Do I?
lookgod88 said:
Hi dummyplug, thank you for your reply and your referring. But I actually don't need to flash ROM, that's why I thought that I don't need to unlock the bootloader either. Do I?
Click to expand...
Click to collapse
The reason to unlock the bootloader is because if it is locked you can't run custom recovery (not flash, just a temp boot up with custom recovery), which is need for the root process, in short, you need to unlock the boot loader before you can do anything.
something like kingroot can bypass the need of an unlocked bootloader, so you actually can use kingroot to root your nexus first, then use those bootloader unlocker from play store to unlock the bootloader, but I will stay away from those tools because I don't trust them.
the toolkit can help you to unlock the bootloader and root, and do something else.
p.s. that means you need an unlocked bootloader to root, meanwhile can keep all other things (recovery, firmware) as stock.
DummyPLUG said:
The reason to unlock the bootloader is because if it is locked you can't run custom recovery (not flash, just a temp boot up with custom recovery), which is need for the root process, in short, you need to unlock the boot loader before you can do anything.
something like kingroot can bypass the need of an unlocked bootloader, so you actually can use kingroot to root your nexus first, then use those bootloader unlocker from play store to unlock the bootloader, but I will stay away from those tools because I don't trust them.
the toolkit can help you to unlock the bootloader and root, and do something else.
Click to expand...
Click to collapse
Oh I see. Now I understand! Thank you very much. I got what I want to know.
Hello,
So I am still newer to the Android / Modding world (Had my Nexus 6 for about 3 weeks now, first Android phone). The extent of my experience is manual flashing 6.0 to my Nexus 6 and Nexus Player and flashing custom recoveries and boot images. I am a bit confused right now. I seen a post in the XDA News that you can now root 6.0 without modifying /system. I thought that was already the case when rooting the Nexus 6? All you had to do is flash TWRP, flash the modified boot image, and install SuperSU through TWRP. There appears to be two different root methods now. Could someone please clarify what the difference is and which I should go with? Here is the link to the XDA Post from Chainfire on the rooting methods.
http://forum.xda-developers.com/apps/supersu/wip-android-6-0-marshmellow-t3219344
Thank you in advance.
1. unlock your bootloader with fastboot oem unlock
2. fastboot flash twrp recovery
3. flash any marshmallow custom kernel(if on marshmallow) and the latest supersu in your new twrp recovery
4. reboot with root
simms22 said:
1. unlock your bootloader with fastboot oem unlock
2. fastboot flash twrp recovery
3. flash any marshmallow custom kernel(if on marshmallow) and the latest supersu in your new twrp recovery
4. reboot with root
Click to expand...
Click to collapse
Thank you for the info but I do know this. I have done this already. I am trying to understand how doing this modifies the system. How does this method differ from the newer method that has been posted? I am trying to learn all I can about Android, Root, etc. I have learned so much already in a very short time. I would like someone to explain the differences in / in the outcome of these two methods. I don't want to be a noob forever here. lol. Thank You.
Rektifying said:
Thank you for the info but I do know this. I have done this already. I am trying to understand how doing this modifies the system. How does this method differ from the newer method that has been posted? I am trying to learn all I can about Android, Root, etc. I have learned so much already in a very short time. I would like someone to explain the differences in / in the outcome of these two methods. I don't want to be a noob forever here. lol. Thank You.
Click to expand...
Click to collapse
There is no difference in the outcome. Root merely lets one modify files (root files) that you could not before. It does not put anything else on your device.
Rektifying said:
Thank you for the info but I do know this. I have done this already. I am trying to understand how doing this modifies the system. How does this method differ from the newer method that has been posted? I am trying to learn all I can about Android, Root, etc. I have learned so much already in a very short time. I would like someone to explain the differences in / in the outcome of these two methods. I don't want to be a noob forever here. lol. Thank You.
Click to expand...
Click to collapse
there is no other way to root a nexus.
whichever method you choose to root a nexus with, even a root toolkit, they all do it the exact same way.
/system is always modified by root. You need the su binary and scripts to call it in /system. You have to add these files to get root access and adding files counts as a modification. You cannot root any phone without this.
Sent from my Nexus 6 using Tapatalk
Hi guys. I somehow messed things up really bad.
I was running a modded ROM, but decided I wanted to go back to unrooted stock. I followed this instructions in this video: https://www.youtube.com/watch?v=6avEPGWB8E0
Unfortunately, things didn't work out. When I tried flashing the files it kept saying "system not found". Now I'm stuck in recovery forever. If I try to press start, nothing happens. If I scroll up to factory, nothing happens either. If I look at the Bootloader logs, all it says is "failed to validate system image. Boot up failed".
The one good thing is that the phone recognizes being plugged into my computer (Windows 10), so maybe there's a small chance I can get my phone back. If you guys have a solution, please let me know, as I'm pretty distraught right now. Also hoping there's a chance I can get my photos back that are on the device, though that seems unlikely now.
Unrooted stock? I can possibly see going back to rooted stock, or at least a CF (rooted) stock-based ROM, but not unrooted stock. "Please make me a slave again. Please, I don't like owning my phone."
Do you still have TWRP custom recovery or do you only have stock recovery? If you have TWRP, use the File Manager and drag over a custom ROM from your PC, and flash it.
ChazzMatt said:
Unrooted stock? I can possibly see going back to rooted stock, or at least a CF (rooted) stock-based ROM, but not unrooted stock. "Please make me a slave again. Please, I don't like owning my phone."
Do you still have TWRP custom recovery or do you only have stock recovery? If you have TWRP, use the File Manager and drag over a custom ROM from your PC, and flash it.
Click to expand...
Click to collapse
Long story short, I'm a slave to Pokemon Go. I used to be super passionate about having my phone rooted and everything, but I found I wasn't really using the rooted features at all. I can completely understand the appeal of having it rooted, it's just not something I need right now.
Unfortunately I have the stock recovery, and nothing seems to be loading on it.
Xpwnage123 said:
Long story short, I'm a slave to Pokemon Go. I used to be super passionate about having my phone rooted and everything, but I found I wasn't really using the rooted features at all. I can completely understand the appeal of having it rooted, it's just not something I need right now.
Unfortunately I have the stock recovery, and nothing seems to be loading on it.
Click to expand...
Click to collapse
Is your bootloader still unlocked? Can you connect your phone via ADB and re-flash TWRP? Forget about Pokemon Go for now and just get your phone back to working.
Also with custom ROMs you can still run the ROM and UNroot your phone. (I know you can with CM.) No need to go back to stock, unless parent company of Pokemon is clueless and demands stock.
Well, seems they are clueless and doing what Android Pay does:
http://www.xda-developers.com/lates...blocks-rooted-devices-from-entering-the-game/
What Niantic has managed to do with the update is kill off the enthusiasm in users who had root but were not cheating. Root is used for many more things outside of cheating in a game, and to assume that all rooted users are cheaters is just silly.
_____
After some more reading around, it seems Niantic is actually using the SafetyNet checks to check for root. XDA Senior Member MaaarZ found the SafetyNetService being called in the game code. Niantic is really making users jump through the whole nine yards, as this is the same method employed by Android Pay. This means that if you do need to run Pokémon GO on a rooted device, you need to go through the whole Magisk and systemless root way. Or stop playing completely, because that is what Niantic wants you to do.
Click to expand...
Click to collapse
ChazzMatt said:
Is your bootloader still unlocked? Can you connect your phone via ADB and re-flash TWRP? Forget about Pokemon Go for now and just get your phone back to working.
Click to expand...
Click to collapse
First of all thanks for your prompt responses. I really appreciate it.
I've always sort of had trouble getting ADB to work. I'm pretty sure the only version ADB I have installed on my laptop is the Fastboot version I downloaded from the video I linked. As I'm typing this, I'm currently downloading Android SDK and RSDLite, though the process is taking a while.
I think my bootloader is unlocked, but I'm not entirely sure. I think when I installed the custom rom, root first came out on the turbo. The method I used was the Mofo method. If I need to install a more elaborate version of ADB I will do so, I just might need clarification on what particular version is most optimal to use.
Xpwnage123 said:
I think my bootloader is unlocked, but I'm not entirely sure. I think when I installed the custom rom, root first came out on the turbo. The method I used was the Mofo method. If I need to install a more elaborate version of ADB I will do so, I just might need clarification on what particular version is most optimal to use.
Click to expand...
Click to collapse
The MoFo method was not bootloader unlock, and it only worked on KitKat. Wow, you were still using MoFo?
Real bootloader unlock came via Sunshine ($25) last November 2015, and you needed at least stock Lollipop 5.1 with Verizon firmware SUTL-44. It also now works with Verizon SUTL-49.
If you never paid for Sunshine, then your bootloader was never unlocked.
However, using ADB you can re-flash stock firmware even with a locked bootloader.
Some Droid Turbo owners like @TheSt33v will be more help than me as to what version you should flash. I own three Quarks but not the Droid Turbo. But as long as you are flashing, might was well update to SUTL-49.
IF you can't find a good download of SUTL-49, here's at least SUTL-44. Thank @bhb27.
https://www.androidfilehost.com/?fid=24052804347843637
_______
Also, go read this.
How to Manually Official Firmware on any Motorola Device
http://forum.xda-developers.com/dro...force-how-to-manually-flash-official-t3282077
Even though written for the Kinzie, the concept and method is the same.
Xpwnage123 said:
First of all thanks for your prompt responses. I really appreciate it.
I've always sort of had trouble getting ADB to work. I'm pretty sure the only version ADB I have installed on my laptop is the Fastboot version I downloaded from the video I linked. As I'm typing this, I'm currently downloading Android SDK and RSDLite, though the process is taking a while.
I think my bootloader is unlocked, but I'm not entirely sure. I think when I installed the custom rom, root first came out on the turbo. The method I used was the Mofo method. If I need to install a more elaborate version of ADB I will do so, I just might need clarification on what particular version is most optimal to use.
Click to expand...
Click to collapse
You need neither the SDK nor RSDLite. If you're interested in unlocking your bootloader (and returning to pokemon go-ready stock in the process), follow my guide here: http://forum.xda-developers.com/droid-turbo/general/guide-how-to-unlock-bootloader-install-t3292684. If you don't want to unlock your bootloader, and you want to return to stock kitkat so that you can continue using mofo, let me know what build you're on (see "about phone" in your settings) and I can send you a link to the firmware package that you'll need. If you want to update to the latest firmware and you don't care about unlocking your bootloader (maybe ever), only follow section 0 of my guide and take whatever OTA updates you are given with the understanding that you'll probably never be able to unlock your bootloader again after taking them.
ChazzMatt said:
The MoFo method was not bootloader unlock, and it only worked on KitKat. Wow, you were still using MoFo?
Real bootloader unlock came via Sunshine ($25) last November 2015, and you needed at least stock Lollipop 5.1 with Verizon firmware SUTL-44. It also now works with Verizon SUTL-49.
If you never paid for Sunshine, then your bootloader was never unlocked.
However, using ADB you can re-flash stock firmware even with a locked bootloader.
Some Droid Turbo owners like @TheSt33v will be more help than me as to what version you should flash. I own three Quarks but not the Droid Turbo. But as long as you are flashing, might was well update to SUTL-49.
IF you can't find a good download of SUTL-49, here's at least SUTL-44. Thank @bhb27.
https://www.androidfilehost.com/?fid=24052804347843637
_______
Also, go read this.
How to Manually Official Firmware on any Motorola Device
http://forum.xda-developers.com/dro...force-how-to-manually-flash-official-t3282077
Even though written for the Kinzie, the concept and method is the same.
Click to expand...
Click to collapse
TheSt33v said:
You need neither the SDK nor RSDLite. If you're interested in unlocking your bootloader (and returning to pokemon go-ready stock in the process), follow my guide here: http://forum.xda-developers.com/droid-turbo/general/guide-how-to-unlock-bootloader-install-t3292684. If you don't want to unlock your bootloader, and you want to return to stock kitkat so that you can continue using mofo, let me know what build you're on (see "about phone" in your settings) and I can send you a link to the firmware package that you'll need. If you want to update to the latest firmware and you don't care about unlocking your bootloader (maybe ever), only follow section 0 of my guide and take whatever OTA updates you are given with the understanding that you'll probably never be able to unlock your bootloader again after taking them.
Click to expand...
Click to collapse
Thank you guys. I was able to revive my phone from the dead using your advice. Unfortunately, I lost all of the photos from my trip to Europe, but overall I'm happy my phone is back and running. That will be a lesson to me to be less lazy about backing up my data.
Once again, thank you very much.
Someone over in Resurrection Remix thread got Pokemon Go to work with Root Cloak:
Nitefire77 said:
Pokemon go works on my phone with rootcloak. Wasn't too difficult to get it working
Click to expand...
Click to collapse
You can ask him for details. So, you can still run a custom ROM if you wish...