Menu and Back Buttom don't work after changing rom!!! - Galaxy S III Mini Q&A, Help & Troubleshooting

hi there! my Current rom is JB 4.2 after flashing any roms that 4.4 and higher my menu and back button dont work i tried a lot of rom but only JB 4.2 works i think theres a problem with my phone and im hoping that you can help me! im so problematic in the past few days. thank you very much. sprry for my english.

Hello, had the same problem yestarday, my phone is bricked with boot loop and no download mode. Installed Cyanogen, user about 2 hours, then installed google apps, phone switched off at some stage. Now during booting both menu and back button are blinking fast. I'm wondering if it's hardware problem, or software signaling for kernel panic, like linux do with num-lock and capslock diodes.

Related

Galaxy S blue screen

Hello guys
A few days ago I tried to update my I9000 from Gingerbread to ICS (this version if you want to know it exactly: http://forum.xda-developers.com/showthread.php?t=1363593 ^^)
Everything worked out fine till I got a bootloop through a (today) known bug. But now to my real problem: I tried to flash a stock-rom to my phone to solve the problem, but suddenly the process was interrupted by a blue screen!! It was a bit like going into the test menu through typing the code into the dialer, but it was during the flashing-process!
I haven´t found anything about this problem (I have only found a bug were the display is a bit bluish, but this is caused by the kernel. And I found something were the PC got a bluescreen, but I have found nothing about a blue screen on the phone.)
Fortunatelly the download mode was still working and I could flash another rom with ODIN, but does anybody know what kind of bug this is?
Thanks

[Q] SGS failed fw update touch key

Hi? sorr for my eng.
Trouble:
i replaced the sens keys with mic and vibro, on phone fw was 4.1.1, key is work well, but after 2 day keys (back and home) don`t working hardware key - work ok.
What i do:
1. change fw to 2.3.5 and *#*#2663#*#* - when i do touch key fw update - phone go to reboot
2. change fw to 2.3.3 and *#*#2663#*#* - phone - faild to update
3. change fw to 2.2.1 and *#*#2663#*#* - phone - cycling and nothing to do ((
problem solved. Close
rmsul said:
Hi? sorr for my eng.
Trouble:
i replaced the sens keys with mic and vibro, on phone fw was 4.1.1, key is work well, but after 2 day keys (back and home) don`t working hardware key - work ok.
What i do:
1. change fw to 2.3.5 and *#*#2663#*#* - when i do touch key fw update - phone go to reboot
2. change fw to 2.3.3 and *#*#2663#*#* - phone - faild to update
3. change fw to 2.2.1 and *#*#2663#*#* - phone - cycling and nothing to do ((
Click to expand...
Click to collapse
how??
rmsul said:
problem solved. Close
Click to expand...
Click to collapse
Hi,
this sounds like my problem.
I have it on 2.3.6 after replacing the keypad because of water damage and wrong cleaning off the home-button...
I am searching for a solution quite a long time.
It would be great if you could post the problem solution here.
Thanks a lot.
nears said:
Hi,
this sounds like my problem.
I have it on 2.3.6 after replacing the keypad because of water damage and wrong cleaning off the home-button...
I am searching for a solution quite a long time.
It would be great if you could post the problem solution here.
Thanks a lot.
Click to expand...
Click to collapse
:victory: :victory: :victory: :victory: :victory:
yeahaa... after 3 days of testing and testing i finaly made it ....
Well the trick with *#*#2663#*#* works only on froyo and not on any other stock rom...
So just get Froyo and after flashing it do a full wipe within the recovery menu. Afterwards boot and enter *#*#2663#*#* and update the TouchPad FW.
greets nears
Anxious to try FroYo
Same thing happened to me a week ago, the four touch keys across the bottom of my T989 suddenly stopped working for no apparent reason.
When I bought my T989 in Nov2011, I got it from a guy who bought it for his son, but his son decided he wanted an iPhone instead, so it was brand new BUT already rooted (juggernaut v3.1, CMR). It was running flawlessy until now. I hadn't done anything to it and was still running the same rom.
Over the past week I've gotten up to speed and I wiped it and flashed stock ICS 4.0.4 UVLH1 rom after which the keys functioned normally UNTIL Kies said there was newer firmware, and so I updated to that. I tried wiping and reflashing ICS in hopes the keys would work again and skip the Kies update, but this time the keys didn't work at all. I've had the phone apart to examine the hardware and (without removing the screen) everything appears perfect. I am still holding out hope that it's a software thing, not a hardware thing.
I tried the *#2663# code trick and pressed the "Touch Key FW Update" button, but it just stayed busy for the four hours I let it grind away (obviously not working).
So, noob question, does anyone know where I could find a stock Froyo rom for the T989? I've only seen it for the T959. I really want to try this and see if it gets my touch keys working again.
Thanks in advance.

[Q] Always stuck at boot screen after few days that i have flashed a new rom

Hello everyone...
I always flash new roms to my GN...most of them were working fine...but some of the roms seems have some problems....
After I flashed a new rom, it always works perfectly...i can reboot/ restart and restore the apps without any problem....but few days later....it reboots automatically...and stuck at boot screen...but even i search the thread of the custom roms...seems no one got this problem....I can boot to CWM ....and i tried to fix it ....even i install the rom again...it still stuck at the boot screen....and i finally wipe the data....then it can boot normally again....then i restore my apps once again....everything return normal..........for few days only....and it stuck at boot screen again....therefore....i can only enjoy the rom for few days (maybe 3-4 days)..work perfectly for few days....but it will crash accidently without any symptom..........
Then i tried other roms...........some roms dont have this problem (mostly aokp/aosp base)...and some roms usually have this problem (non-aokp/aosp base)....after suffer this problem several times for different roms.....i just think that it may not the rom's problem..but i cant figure out why this will happen....I reli want to know is there anyone got this problem too or any method to tackle this problem...
Thx alot and sorry for my poor english....
Exactly which ROMs reboot
Is it jellybean touchwiz ROMs?
Sent from my Nexus 7 using Tapatalk 2
Yes..Touchwiz roms....for example...AmniX"-Xperia Note , SlimWizz5 Tablet...
Only work fine for 3-4 days....:crying:
You should reinstall apps from the market, restoring apps from backup may leave your phone in a strange state especialy in JellyBean.
you should also flash the JellyBean bootloader.
Hope that helps.

[Q] P1000 stock but just keeps restarting

Hi All,
I have a Galaxy TAB GT-P1000 STOCK!!! Firmware Version 2.2 - Kernel [email protected]
Almost over night it developed a strange fault its just restarts goes into the home screen you can access the device for anything up to 2 mins Then it reboots.
So I thought not a problem I did a stock wipe of the device and reset. However this has not solved the problem!!!
Is this a mechanical (sticky power button) fault or is this software?
At this point I dont mind flashing the phone with a non standard ROM if needed. However would like to keep it standard if possible?
Close this one off in the end I flashed a stock ROM it worked a treat!

Return and Menu keys stopped working

Good day folks
My problem:
My Galaxy S3 LTE's back and menu keys have suddenly stopped working/lighting up.
Currently I'm trialing the "PAC-MAN 4.4 RC1" ROM, so I'm alternating between the stock ROM (backed up by CWM) which is 4.1.2 (for the purpose of comparison)
In both ROMs the buttons are dead.
I have tried a million solutions out there to no avail.
I'm using the on-screen soft keys by editing the build.prop file for the moment but I really want my hardware keys back.
I started to think of flashing a new kernel in the hope that would fix the problem. However I'm not sure which kernel to choose to be compatible with both ROMs that I'm using!
Can anyone please point me the right direction?
Current Kernel: 3.0.31-633241
Build number: JZO54K.I9305XXBLL3
Many many thanks in advance.
With both roms you have same problem?
Last resort is to flash full rom downloaded from sammobile/live updates samsung (search one of these in google) and flash it through odin (tutorial may be find here on xda).
If that doesn't help - probably hardware side is broken :/

Categories

Resources