Related
HI guys i was unable to get my stock rom ,but i'm using viper 5.7.0 now and i want to unlock my phone is there any method to unlock sprint htc one with viper based rom? tried using terminal method to unlock but didnt work
bloodkiddie said:
HI guys i was unable to get my stock rom ,but i'm using viper 5.7.0 now and i want to unlock my phone is there any method to unlock sprint htc one with viper based rom? tried using terminal method to unlock but didnt work
Click to expand...
Click to collapse
You want to sim-unlock the phone of unlock the bootloader?
bloodkiddie said:
HI guys i was unable to get my stock rom ,but i'm using viper 5.7.0 now and i want to unlock my phone is there any method to unlock sprint htc one with viper based rom? tried using terminal method to unlock but didnt work
Click to expand...
Click to collapse
Here you go http://forum.xda-developers.com/showthread.php?t=2586704
Sent from my HTC One using Tapatalk
alray said:
You want to sim-unlock the phone of unlock the bootloader?
Click to expand...
Click to collapse
bootloader is unlocked but i want simunlock,i'm using sprint viperone 5.8.0.can anyone help me to unlock my sim and make it work with gsm sims
bloodkiddie said:
bootloader is unlocked but i want simunlock,i'm using sprint viperone 5.8.0.can anyone help me to unlock my sim and make it work with gsm sims
Click to expand...
Click to collapse
You can't! It's a cdma phone not a gsm!
alray said:
You can't! It's a cdma phone not a gsm!
Click to expand...
Click to collapse
Ibought this phone as unlocked from ebay doesn't it now work like before? actually my phone is C-spire not sprint,since we dont have roms for cspire i rooted it to sprint rom
bloodkiddie said:
Ibought this phone as unlocked from ebay doesn't it now work like before? actually my phone is C-spire not sprint,since we dont have roms for cspire i rooted it to sprint rom
Click to expand...
Click to collapse
Follow the guide posted above. After unlocking it you might have issue when connecting to other carrier s network so be sure they are using compatible frequencies. I'm almost sure you will not be able to connect it to any other CDMA carrier. Normally CDMA carriers will not accept a phone on their network if not sold by them.
Next time if you are planning to switch carriers, buy a gsm phone, much easier! even with a locked gsm phone, you'll only need to sim-unlock the phone with a purchased code then put in any gsm sim card.
Sorry I can't help you more, I'm not familiar with the WLS variant.
alray said:
Follow the guide posted above. After unlocking it you might have issue when connecting to other carrier s network so be sure they are using compatible frequencies. I'm almost sure you will not be able to connect it to any other CDMA carrier. Normally CDMA carriers will not accept a phone on their network if not sold by them.
Next time if you are planning to switch carriers, buy a gsm phone, much easier! even with a locked gsm phone, you'll only need to sim-unlock the phone with a purchased code then put in any gsm sim card.
Sorry I can't help you more, I'm not familiar with the WLS variant.
Click to expand...
Click to collapse
Actually i was using this phone before and i tried to update my phone somethin went wrong and ended up without os so now i installed viperone and i'm unable to use it now
##443336772# does not work ... did somebody knows??
3845#*xxx# where xxx = is your model variant. i.e., 959 for t-mobile.
Or just call and ask they will give it out in most cases if you ask for the msl / spc
Sent from my LG-D959 using Tapatalk
XmentalX said:
Or just call and ask they will give it out in most cases if you ask for the msl / spc
Sent from my LG-D959 using Tapatalk
Click to expand...
Click to collapse
got it .read by cdma work shop 2.7
Unable to enable diag mode on sprint lg g flex.
when i dial ##3424# its asking for Service Code. i m not getting any ports on pc so that i can connect to cdma workshop or other software
I m in stock rooted 4.2.2.
any other way to enable diag mode with some script or spc utility.
LG FLEX
Keshav_is said:
when i dial ##3424# its asking for Service Code. i m not getting any ports on pc so that i can connect to cdma workshop or other software
I m in stock rooted 4.2.2.
any other way to enable diag mode with some script or spc utility.
Click to expand...
Click to collapse
I am having same problem did you find away to get msl code?
Keshav_is said:
when i dial ##3424# its asking for Service Code. i m not getting any ports on pc so that i can connect to cdma workshop or other software
I m in stock rooted 4.2.2.
any other way to enable diag mode with some script or spc utility.
Click to expand...
Click to collapse
Try this
http://forum.xda-developers.com/showthread.php?t=2049701&page=2
Hello,
I have been trying to unlock my HTC M8 HK for use with ATT or TMO, however i have tried changing the config.dat file, using OMAND sim lock methode and installed ViperOneM8 custom rom with no success.
I have tried both methods using lollipop, and 4.4.2 with no success, only with international carriers but no domestic.
If anyone has had any success please, help would be appreciated.
Thanks in advance.
To my knowledge the Sprint M8 cannot be SIM unlocked for use on other domestic carriers. SIM unlocking only works for international use.
Magnum_Enforcer said:
To my knowledge the Spirit M8 cannot be SIM unlocked for use on other domestic carriers. SIM unlocking only works for international use.
Click to expand...
Click to collapse
Not even by Sprint itself?
Get your MSL code and try resetting data settings. This can be accessed by dialing a code(forgot which one) but I think its ##3424#
Vcek said:
Get your MSL code and try resetting data settings. This can be accessed by dialing a code(forgot which one) but I think its ##3424#
Click to expand...
Click to collapse
Thank You,
When i dial ##3424# it takes me to DM Command Service, and Serial Activity. I Guess i enable Diag Mode, how do i reset data settings?
Try ##3282#
Vcek said:
Try ##3282#
Click to expand...
Click to collapse
Opened EPST?Data Profile>Restore. Phone restarted
No difference.
---
Seems there is no way to allow for other bands to operate, looks like there is some sort of hardware or code restrictrion hidden beneath the firmware that we haven't figured. When changing NV Values the radio turns off, when trying to unlock sim, it does not allow any domestic sim.
Thanks for the help, but i'd call this closed for now.
Hello All
I cannot find guide to Unlock Lte bands on MTk devices.
I have blu r1 hd , rooted , unlocked boot loader
and unable to use lte here , so want to unlock LTE (2300/1800/850MHz) Bands,,,pls hep me thank you
sorry formy bad English
http://forum.xda-developers.com/r1-hd/help/3g-4g-lte-t3445056
karty said:
Hello All
I cannot find guide to Unlock Lte bands on MTk devices.
I have blu r1 hd , rooted , unlocked boot loader
and unable to use lte here , so want to unlock LTE (2300/1800/850MHz) Bands,,,pls hep me thank you
sorry formy bad English
http://forum.xda-developers.com/r1-hd/help/3g-4g-lte-t3445056
Click to expand...
Click to collapse
agree with you
me too want unlock LTE
Download any MTK Engineer Mode app from Play, under Bandmode select any band you want. However after reboot, you lose these bands so you have to manually turn them on again
clu1688 said:
Download any MTK Engineer Mode app from Play, under Bandmode select any band you want. However after reboot, you lose these bands so you have to manually turn them on again
Click to expand...
Click to collapse
The only band available via Engineer mode is 12, the remaining are disabled in the radio. This has been documented in several posts.
kal250 said:
The only band available via Engineer mode is 12, the remaining are disabled in the radio. This has been documented in several posts.
Click to expand...
Click to collapse
Is there any way to automate this on bootup?
Sizzlechest said:
Is there any way to automate this on bootup?
Click to expand...
Click to collapse
Not that im aware of.
kal250 said:
Not that im aware of.
Click to expand...
Click to collapse
I'm not familiar with the MTK Engineer Mode app, but doesn't it just execute AT commands? If so, all we might need is the AT command to enable band 12 and add that to an autostart script (assuming the phone is rooted).
Do you have this one? http://forum.xda-developers.com/showthread.php?p=69158594
Hello guys i have a problem with my network data i can't add or edit APN on my lg g4 ls991 ZVD :confused
i did dial ##3282# and i put the password but i couldn't edit or add APN (there is ota but i couldn't edit it )
Please can you help me :crying: , and thank you :fingers-crossed:
ilyas1514 said:
Hello guys i have a problem with my network data i can't add or edit APN on my lg g4 ls991 ZVD :confused
i did dial ##3282# and i put the password but i couldn't edit or add APN (there is ota but i couldn't edit it )
Please can you help me :crying: , and thank you :fingers-crossed:
Click to expand...
Click to collapse
U do have ure msl code from sprint. U should be able to edit them with the msl
TheMadScientist420 said:
U do have ure msl code from sprint. U should be able to edit them with the msl
Click to expand...
Click to collapse
yes i do have msl code but i can't edit apn , there is one its name OTA but i can't edit it
and thanks for you for reply
ilyas1514 said:
yes i do have msl code but i can't edit apn , there is one its name OTA but i can't edit it
and thanks for you for reply
Click to expand...
Click to collapse
Ill look i to this once i get off work. Should be able to edit them once u have msl.
TheMadScientist420 said:
Ill look i to this once i get off work. Should be able to edit them once u have msl.
Click to expand...
Click to collapse
i had msl code then i put the code then i entre to apn but i couldn't edit or add anything :crying:
ilyas1514 said:
i had msl code then i put the code then i entre to apn but i couldn't edit or add anything :crying:
Click to expand...
Click to collapse
Ill run mine back stock tonite and try to walk throught this. Unrooted like yours to get throught it
TheMadScientist420 said:
Ill run mine back stock tonite and try to walk throught this. Unrooted like yours to get throught it
Click to expand...
Click to collapse
okay
anyway thank you sir :good:
ilyas1514 said:
okay
anyway thank you sir :good:
Click to expand...
Click to collapse
sorry man in transition of a new used pc lol my second hand me down dell xps is 10 times better than my new acer lol
trying to get everything set up on it
ilyas1514 said:
Hello guys i have a problem with my network data i can't add or edit APN on my lg g4 ls991 ZVD :confused
i did dial ##3282# and i put the password but i couldn't edit or add APN (there is ota but i couldn't edit it )
Please can you help me :crying: , and thank you :fingers-crossed:
Click to expand...
Click to collapse
Were you able to edit/add APN before? if so....... were you on ZVD?
If this is your first time trying to do this, I doubt your phone is sim unlocked. You need your phone sim unlocked. I believe it requires UCICC unlocking through OTA with the help of sprint.............this is if you are on ZVD or later.
klurrant said:
Were you able to edit/add APN before? if so....... were you on ZVD?
If this is your first time trying to do this, I doubt your phone is sim unlocked. You need your phone sim unlocked. I believe it requires UCICC unlocking through OTA with the help of sprint.............this is if you are on ZVD or later.
Click to expand...
Click to collapse
He should still be able to modify them with msl code. We had this issue with some people that did unlock. Only way around was a build prop edit from spr to open. But ofcoarse requires root
klurrant said:
Were you able to edit/add APN before? if so....... were you on ZVD?
If this is your first time trying to do this, I doubt your phone is sim unlocked. You need your phone sim unlocked. I believe it requires UCICC unlocking through OTA with the help of sprint.............this is if you are on ZVD or later.
Click to expand...
Click to collapse
I was using android 5.0 lolipop and i could add or edit apn on it as normal but but after i got the android 6.0 zvd and now i couldn't add or edit Apn but i can make calls or send messages
ilyas1514 said:
I was using android 5.0 lolipop and i could add or edit apn on it as normal but but after i got the android 6.0 zvd and now i couldn't add or edit Apn but i can make calls or send messages
Click to expand...
Click to collapse
now were u unlocked gsm user or sprint
TheMadScientist420 said:
now were u unlocked gsm user or sprint
Click to expand...
Click to collapse
gsm user i guess
Is it possible to add apn or modify via cdma tools?
I have 5 LG LS991 gsm Unlocked ranging from ZVD to ZVF systems versions. But no Data since there is no way to add or edit APN or even root. Is there a way to modify APN using cdma tools? Or another NV editor?