Database Develop

brick with no option to unlock BL 3 buttons dsnt works

Hi, yesterday i was flash with Dload method a rolback with 3 butons
all ok, but my phone dsnt start, and dsnt respond to any comand like 3 buttons aggain, and only method is to conect to pc in fastboot mode, status all lockef ( FRP and PHONE ....
so with dc unlocker i can read the phone state, and my version is EVA-L09C521B140
someone had this problem.. ? how to solve it ?
i already have the unlock code, via huawei id Generator but i didnt have sucess to "flash" it mesage say like "not allowed"
"Android reboot reason :
erecovery
NA
volume_down_press_func"
this is the mesaje whith android robot
Edit: when i do 3 button combinations, phone shake 2 times , first black screen ( i supose to shutdown) and then whith logo and logo is the last steep, nothing more.

Problem solved
Huawei was send me a new p9 whith a new waranty time. Very good aftersale from they.
I was say the phone dsnt turn on and stuck in huawei logo.... ?

Very hard bricked p9 any help ?

Hello guys first of all Sorry for my bad english i will try my best, i bought Huawei p9 for cheap used on the market, phone has a brick problem but i have tryed almost everything: I will provide photos in this post and give all details. So phone cant boot up it says your device has been unlocked and can't be trusted so it bootlops if u dont hold volume Up, if you do u enter Huawei eRecovery where u can navigate with + - volume buttons basically u know it, so i enter " Download latest version and recovery " but there i cant select my wifi Nvaigation commands work but u cant select any wifi so u can only shutdown or reboot. So that is the part one, part two: Fastboot mode works Volume - + usb and u are in fastboot Phone is Unlocked and FRP unlock, i have installed JDK ( java ) + platform + i have installed ADB&fastboot drivers, problem is even with the drivers my device is recognised HI3650 then i have to manualy go in device menager and change it to Android ADB interface, So now im in powershell tyring some commands and some work some no i dont know why, I cant factory reset i cant Wipe ( or erase anything ) im getting adb failed command not allowed, But i can Fastboot flash recovery ( any img ) but noting happens when you flash it even the twrp. So now we are in part 3: Ok so i have found a way to force update device with SD card + and - hold and power button but my phone stucks and Huawei logo and cant do anything.
Down are the pictures of everything any help or idea thanks a lot.

Have you tried to make it work with old firmware? Rllback or anything? If yes and it doesnt work then
Dc phoenix is your friend. 15 euros it will cost you

[SOLVED] Soft brick ?

Hi
I think my redmi 4x is soft bricked.
At start, mi logo appears for 1/2 second and phone shut down.
It can boot to fastboot.
So, I think I should use miflash.
I just have two questions :
- Do I need first to reflash stock recovery ? If yes, where can I find it ?
- Does it relock phone, to flash with mi flash ?
Thanks for your help !
EDIT : miflashtool gives me this error message : Flash tz error...
EDIT 2 : problem solved, bootloader was relocked, I don't know how or why...
A simple official unlock and it's done.

Problem technical help * Mi9 *

Reposting my problem i will update
My problem is after install Custom room and too 2f2s and i want back my mui 10 i had problem with recovery cant access... i was in fastboot mode but when i want to do it with fastboot totaly crash say mismatching image and device" mi 9dead phone now i have only COM port to save phone somebody can help me please?
https://ctrlv.cz/S24A
https://ctrlv.cz/mepQ
https://ctrlv.cz/ZR9A
https://ctrlv.cz/HxFV
https://ctrlv.cz/DKr2
https://ctrlv.cz/FVXL
i cant access this as i write cant access to fastboot and recovery stuck in service com port..

Jakubx12 said:
Reposting my problem i will update
My problem is after install Custom room and too 2f2s and i want back my mui 10 i had problem with recovery cant access... i was in fastboot mode but when i want to do it with fastboot totaly crash say mismatching image and device" mi 9dead phone now i have only COM port to save phone somebody can help me please?
https://ctrlv.cz/S24A
https://ctrlv.cz/mepQ
https://ctrlv.cz/ZR9A
https://ctrlv.cz/HxFV
https://ctrlv.cz/DKr2
https://ctrlv.cz/FVXL
i cant access this as i write cant access to fastboot and recovery stuck in service com port..
Click to expand...
Click to collapse
What did you exactly do???

fix
kaydentc1 said:
What did you exactly do???
Click to expand...
Click to collapse
some people have authorization on edl remotely they can do it.. i do it with this way working

problem wih Le2 - unlocking sequence e recovery

Good morning.
I have a problem wih Le2
It does not accept the unlocking sequence ( and does not see the smartphone when connecting it with USB, - so it does not let me in for flash operations) - and the Recovery screen is displayed, but no enter in recovery
Can someone help me?
Sorry for my english, i'm italian
Thank you