M7 S-On version-main blank what do now..? - One (M7) Q&A, Help & Troubleshooting

(bootloader) version: 0.5
(bootloader) version-bootloader: 1.61.0000
(bootloader) version-baseband: 4T.35.3218.16
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: SH35YW906589
(bootloader) imei: xx
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__032
(bootloader) battery-status: good
(bootloader) battery-voltage: 4051mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-0e2a13e5
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Click to expand...
Click to collapse
Hello, this is the first time I got my hands on htc m7, and its kind'a a lot of job to get it back to stock. So fastboot getvar version-main doesnt show anything.
This htc m7 is S-On, tampered and unlocked. I cant manage what kind of ruu I need to download just to get to stock android (now it is on cyanogen)

xpresas said:
Hello, this is the first time I got my hands on htc m7, and its kind'a a lot of job to get it back to stock. So fastboot getvar version-main doesnt show anything.
This htc m7 is S-On, tampered and unlocked. I cant manage what kind of ruu I need to download just to get to stock android (now it is on cyanogen)
Click to expand...
Click to collapse
The blank version main is caused by a bug in older TWRP recovery versions. Hboot 1.61 + your MID and CID mean that you have a 7.19.401.? version.
Try the 7.19.401.22 RUU first.
http://forum.xda-developers.com/htc-one/general/lollipop-ruu-zip-small-collection-t3053944
File at post #2
Instructions at post #1
If its nor working post back here :good:

Related

[Q] HELP! Battery died while flashing CM11 update

Hi guys,
Need some help as mentioned in the title. I tried flashing the RUU, 1.29.707.3, from fastboot but whenever it got to the HTC screen, after awhile it gives an error and I cant continue flashing. Please help!
Thanks!
Raidorz said:
Hi guys,
Need some help as mentioned in the title. I tried flashing the RUU, 1.29.707.3, from fastboot but whenever it got to the HTC screen, after awhile it gives an error and I cant continue flashing. Please help!
Thanks!
Click to expand...
Click to collapse
theirs no way we can help you with that little bit of information
when asking for help, you need to list your full phone information by posting the results from
fastboot getvar all minus your serial no and IEMI. What version of custom recovery did you have installed. Is you phone S-off ? How did you decide what RUU to flash ?
clsA said:
theirs no way we can help you with that little bit of information
when asking for help, you need to list your full phone information by posting the results from
fastboot getvar all minus your serial no and IEMI. What version of custom recovery did you have installed. Is you phone S-off ? How did you decide what RUU to flash ?
Click to expand...
Click to collapse
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4A.17.3250.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.24.707.1
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: XXXXXXXXXXXXXX
(bootloader) imei: XXXXXXXXXXXXXX
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0714000
(bootloader) cidnum: HTC__044
(bootloader) battery-status: good
(bootloader) battery-voltage: 4307mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d16dc66985
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
If I'm not wrong it's CWM 6.0.4.3. And I downloaded the RUU based on my region before.
Sorry I'm still new about using forums!
Raidorz said:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4A.17.3250.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.24.707.1
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: Remove Me
(bootloader) imei: Remove Me
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0714000
(bootloader) cidnum: HTC__044
(bootloader) battery-status: good
(bootloader) battery-voltage: 4307mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d16dc66985
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Sorry I'm still new about using forums!
Click to expand...
Click to collapse
Please edit your post to remove the info I did
The reason the RUU failed is your S-On and you can't downgrade while s-on
Use this SuperGuide to get your self s-off and hboot 1.44.000 then try your RUU
http://forum.xda-developers.com/showthread.php?t=2541082
clsA said:
Please edit your post to remove the info I did
The reason the RUU failed is your S-On and you can't downgrade while s-on
Use this SuperGuide to get your self s-off and hboot 1.44.000 then try your RUU
http://forum.xda-developers.com/showthread.php?t=2541082
Click to expand...
Click to collapse
I cant boot up and when I try to use the Rumrunner method in fastboot in cant work.
Raidorz said:
I cant boot up and when I try to use the Rumrunner method in fastboot in cant work.
Click to expand...
Click to collapse
Try this for s-off >> http://firewater-soff.com/
clsA said:
Try this for s-off >> http://firewater-soff.com/
Click to expand...
Click to collapse
Problem is I cant boot into android
Raidorz said:
Problem is I cant boot into android
Click to expand...
Click to collapse
sideload a rom like ARHD 31.6 and try

[Q] HTC One US unlocked 32 GB stuck on boot screen after OTA update

I got an OTA update on my HTC One US unlocked 32 GB version. The OTA update installed on the phone but the phone never booted up.
I went into the bootloader and tried factory reset but no success.
Now I want to flash my phone using RUU, but I am not getting correct RUU for my phone. I have unlocked the bootloader from HTCDEV website.
Details are :
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4A.23.3263.28
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.19.1540.4
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT367W910917
(bootloader) imei: 354439059958431
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: BS_US001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4100mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-076e0e17
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
I tried many RUU matching the mid and cid number of my phone for example : htc1guru.com/dld/ruu_m7_ul_k44_sense55_mr_brightstarus_wwe_4-19-1540-9_radio_4a-23-3263-28_10-38r-1157-04l_release_353887_signed_3-exe/ but it gave image error. Please help
still having trouble
do u have s-off if not when trying to flash a ruu you need to relock bootloader b4 running ruu
s_rupainwar said:
I got an OTA update on my HTC One US unlocked 32 GB version. The OTA update installed on the phone but the phone never booted up.
I went into the bootloader and tried factory reset but no success.
Now I want to flash my phone using RUU, but I am not getting correct RUU for my phone. I have unlocked the bootloader from HTCDEV website.
Details are :
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4A.23.3263.28
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.19.1540.4
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT367W910917
(bootloader) imei: 354439059958431
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: BS_US001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4100mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-076e0e17
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
I tried many RUU matching the mid and cid number of my phone for example : htc1guru.com/dld/ruu_m7_ul_k44_sense55_mr_brightstarus_wwe_4-19-1540-9_radio_4a-23-3263-28_10-38r-1157-04l_release_353887_signed_3-exe/ but it gave image error. Please help
Click to expand...
Click to collapse
That ruu should work for you but you are s-on, so as stated above you will need to relock to flash it.
Code:
fastboot erase cache
fastboot oem lock
fastboot reboot-bootloader
Then run the ruu while connected with fastboot usb. :good:
Sent from my HTC One M7 - ARHD 82.0 Using Tapatalk
If you found my posts helpful, Please click thanks :good:

[Q] Return to stock from developer softmod 1.57 HBOOT?

I softmodded to the developer version from a T-Mobile HTC ONE, and it's heading back for service within the next few days. What I need to know is what RUU files do I need to download, etc to put the phone back to 100% stock?
fastboot getvar all (output)
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4T.27.3218.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 5.11.1540.9
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: XXXXXXXXXXX
(bootloader) imei: XXXXXXXXXXXXXX
(bootloader) meid: XXXXXXXXXXXXX
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: BS_US001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4097mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-e47fb74b
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
If you need any other information about the phone, let me know and I'll get it for you. Thanks in advance!
BTW, I tried searching, etc to figure out how to do this, but it's all older information and they were all using HBOOT 1.44 (if I need to downgrade that, I've done it before.)
digital4282 said:
I softmodded to the developer version from a T-Mobile HTC ONE, and it's heading back for service within the next few days. What I need to know is what RUU files do I need to download, etc to put the phone back to 100% stock?
fastboot getvar all (output)
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4T.27.3218.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 5.11.1540.9
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: XXXXXXXXXXX
(bootloader) imei: XXXXXXXXXXXXXX
(bootloader) meid: XXXXXXXXXXXXX
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: BS_US001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4097mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-e47fb74b
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
If you need any other information about the phone, let me know and I'll get it for you. Thanks in advance!
BTW, I tried searching, etc to figure out how to do this, but it's all older information and they were all using HBOOT 1.44 (if I need to downgrade that, I've done it before.)
Click to expand...
Click to collapse
I found this RUU from @Behold_this, it is the 5.14.531.1. There is a Guru Bootloader Reset Tool to make it easier to lock your bootloader.
Well, the CID and MID have been modded, but other than that it's stock aside from the developer rom.
Also, don't forget you will need to change your MID & CID. Here is a tool for changing the MID without ENG HBOOT | Aroma GUI. The MID and CID you might want to change before running the RUU.
Also if TMOBILE cares for s-on then you need to go back all the way to 1.44 hboot with 4.1.2
That's what I did. I changed the MID/CID, removed the "tampered" flag, flashed hboot 1.44, locked the bootloader, flashed the RUU, then locked the bootloader, and set s-on. It's all back to stock now, unrooted. Looks like I never touched a thing. Also, it's going back to HTC I did the advanced replacement, hence the reason I needed to make sure it was completely back to stock. I'm sure if HTC wanted to they could figure out that it had been messed with, but I seriously doubt they would bother since it's for the purple haze in the camera.

No OTA after return to stock

hello
i have M7 developer edition US_001 with S-off my problem is i tried all stock rom version from HTCDEV.com but when the phone is restored back to stock rom it doesn't receive OTA from the phone directly, so i get stock in the same version i installed with RUU.
aelnyal said:
hello
i have M7 developer edition US_001 with S-off my problem is i tried all stock rom version from HTCDEV.com but when the phone is restored back to stock rom it doesn't receive OTA from the phone directly, so i get stock in the same version i installed with RUU.
Click to expand...
Click to collapse
you mean BS_US001 ? there is no such thing as "US_001", post your fastboot getvar all (excluding IMEI an s/n)
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.20.3263.16
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: BS_US001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4074mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-fe1214a4f2
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
aelnyal said:
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) product: m7_ul
(bootloader) modelid: PN0712000
(bootloader) cidnum: BS_US001
Click to expand...
Click to collapse
check here: http://androidruu.com/?developer=M7
for x.xx.1540.x ruu's
no need to lock bootloader or anything since you are S-Off, and stay S-Off
This rom is diffrent from HTCDEV rom?
aelnyal said:
This rom is diffrent from HTCDEV rom?
Click to expand...
Click to collapse
i've never checked the ones on htcdev, but a full RUU would be the same; size should be between 1GB to 1.5GB, the 100MB files are just kernel source codes not RUUs

Looking for correct RUU.exe

Hello all XDA members,
I am looking for the correct RUU.exe for my HTC One M7. Its on Vodafone UK (VODAP001) and HBOOT 1.61.000 and is S-On. I have already relocked the bootloader and flashed the stock recovery back. I have found and tried many RUU.zip from here and HTC but I have learned that as I am S-on I am unable to go this route. This HTC One m7 was running a custom ROM and TWRP but since I am giving it my Father I needed it back to stock and ready to receive any OTA updates that Vodafone throw out.
Thank you all
Andrew
worf105 said:
Hello all XDA members,
I am looking for the correct RUU.exe for my HTC One M7. Its on Vodafone UK (VODAP001) and HBOOT 1.61.000 and is S-On. I have already relocked the bootloader and flashed the stock recovery back. I have found and tried many RUU.zip from here and HTC but I have learned that as I am S-on I am unable to go this route. This HTC One m7 was running a custom ROM and TWRP but since I am giving it my Father I needed it back to stock and ready to receive any OTA updates that Vodafone throw out.
Thank you all
Andrew
Click to expand...
Click to collapse
Can you please post the output of "fastboot getvar all" (hide your imei and sn before posting)
Will be easier to point you the correct RUU.
Btw is KatKiss 5.1 working fine? Haven't played with my tf101 for a while!
Thank you for your quick reply and as requested here is the output to fastboot getvar all:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.61.0000
(bootloader) version-baseband: 4T.35.3218.16
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 7.18.161.30
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: Sxxxxxxxxxxxxx
(bootloader) imei: xxxxxxxxxxxxxxxxx
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: VODAP001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4154mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-92aee636
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Kind Regards,
Andrew
Btw is KatKiss 5.1 working fine? Haven't played with my tf101 for a while!
Click to expand...
Click to collapse
Yes Lollipop 5.1 is working great and I have had no problems. Hopefully TimDuru will be presenting Marshmallow soon for the TF101
worf105 said:
Thank you for your quick reply and as requested here is the output to fastboot getvar all:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.61.0000
(bootloader) version-baseband: 4T.35.3218.16
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 7.18.161.30
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: Sxxxxxxxxxxxxx
(bootloader) imei: xxxxxxxxxxxxxxxxx
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: VODAP001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4154mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-92aee636
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Kind Regards,
Andrew
Click to expand...
Click to collapse
The latest RUU for that version is 7.18.161.21. Since your phone is S-ON you can only flash RUU that are the same version or higher than your actual version (7.18.161.30). There is a way to bypass this. Go to this thread and read at the end of my post (post #2) under "how to downgrade with s-on". Once done and your version-main is showing 7.18.161.2 instead of 7.18.161.30 , flash the 7.18.161.21 RUU using instructions of post #1 (RUU file is at post #2). Don't forget to use the fastboot version provided at post #1, the normal fastboot version won't work to flash a lollipop RUU.
worf105 said:
Yes Lollipop 5.1 is working great and I have had no problems. Hopefully TimDuru will be presenting Marshmallow soon for the TF101
Click to expand...
Click to collapse
Its amazing how this dev is still supporting this device, will try to update :good:
Thank you alray
Will let you know how I get on with your instructions.
Ye TimDuru has done a great job in supporting the TF101. If he never I would have bought another tablet years ago.
Kindest Regards,
Andrew
I worked a treat, thank you alray for your expert help in this matter.
Gratefully yours,
Andrew
worf105 said:
I worked a treat, thank you alray for your expert help in this matter.
Gratefully yours,
Andrew
Click to expand...
Click to collapse
You're welcome :good:
alray said:
The latest RUU for that version is 7.18.161.21. Since your phone is S-ON you can only flash RUU that are the same version or higher than your actual version (7.18.161.30). There is a way to bypass this. Go to this thread and read at the end of my post (post #2) under "how to downgrade with s-on". Once done and your version-main is showing 7.18.161.2 instead of 7.18.161.30 , flash the 7.18.161.21 RUU using instructions of post #1 (RUU file is at post #2). Don't forget to use the fastboot version provided at post #1, the normal fastboot version won't work to flash a lollipop RUU.
Its amazing how this dev is still supporting this device, will try to update :good:
Click to expand...
Click to collapse
hi do you can helme whith my HTC wls RUU :crying:
jhon8500 said:
hi do you can helme whith my HTC wls RUU :crying:
Click to expand...
Click to collapse
Yes, what is the problem?
alray said:
Yes, what is the problem?
Click to expand...
Click to collapse
okay thanks for replying I have a htc one m7 wls I tried to install a rom of cyanogen but I could not install it I decided to return my htc to s-on with the intention of reinstalling the rom stock of factory but I could not find it the intetnado install by SDK but I get the error "error: device '(null)' not found" and by means of the installer of the ruu by means of .exe says it is not appropriate if you can help me I would appreciate this,
this information of my device:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.61.0000
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: FA33YS901134
(bootloader) imei:xxxxxxxxxxxxx
(bootloader) meid: xxxxxxxxxxx
(bootloader) product: m7_wls
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0720000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3841mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-0e2a13e5
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
jhon8500 said:
okay thanks for replying I have a htc one m7 wls I tried to install a rom of cyanogen but I could not install it I decided to return my htc to s-on with the intention of reinstalling the rom stock of factory but I could not find it the intetnado install by SDK but I get the error "error: device '(null)' not found" and by means of the installer of the ruu by means of .exe says it is not appropriate if you can help me I would appreciate this,
this information of my device:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.61.0000
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: FA33YS901134
(bootloader) imei:xxxxxxxxxxxxx
(bootloader) meid: xxxxxxxxxxx
(bootloader) product: m7_wls
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0720000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3841mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-0e2a13e5
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
Click to expand...
Click to collapse
Sorry for the delayed answer.
First, going back S-ON wasn't required and it's also a bad move. Having S-OFF can help a lot when troubleshooting your phone. I don't know what cyanogenmod rom version you tried to install (cyanogenmod roms are so old) but are you sure the one you tried was compatible with the M7_WLS variant? This phone variant will only work with custom roms made specifically for this variant and must also be flashed with a custom recovery compatible with WLS . Just saying because this is the most common error made by people having this phone variant.
Now, what ruu version are you trying to install? The one you need is 6.23.651.10 and can be found here:
http://dl3.htc.com/application/RUU_...99.2143463114.1556074529-999987239.1556074529
Don't forget that since you went back S-ON you now must have a locked or re-locked bootloader to install a RUU. It won't install if it's unlocked.
If not already done, you can re-lock your bootloader using fastboot from a command window using this single command:
Code:
fastboot oem lock
then install the RUU

Categories

Resources