Related
[GUIDE][DEVS][SMALI]Enable "Device Status Official" - Remove SysScope[GUIDE][DEVS]
How to permenantly remove SysScope from your Samsung Touchwiz ROM
Tired of the constant custom padlock on startup? Want permenant device status "Official"?
Team Blackout and KoolKit ROMs are not responsible if you blow up your house, your dog eats your homework,
the zombie apacolypse, your wife/husband divorcing you or if your device turns into an unrecognizable
smoldering pile of plastic. by reading this you agree to take all responsibility for any damage you do to the
universe, your device, your marriage or your failing grades in school or college.
Click to expand...
Click to collapse
This guide and mod originated in the Galaxy S4 threads and was created by @Aou who has since left the AT&T world so development
stopped at that point, I have taken the code and modded it slightly to work for our S5 devices (All variants even the Active)
Click to expand...
Click to collapse
All devs are free to use this MOD with proper recognition in your OP make sure you provide a mention to "Aou" for the
original code found here Removing SysScope - Permanent "Official" Device Status
and myself for the re-write of the instructions and changes to make this work for our devices.
Click to expand...
Click to collapse
NOTICE:
This MOD is not for the squeamish or novice modder it requires patience and a good amount of time to complete.
Click to expand...
Click to collapse
Prerequisites:
You need java installed and working at the command prompt.
You need smali and baksmali in your working directory. I used v1.4.2 of each. Here's some links: baksmali and smali.
Basic ADB skills
A good text editor, such as Notepad++. Even better, and good text comparison tool would be great to check your work (get a trial of Beyond Compare 3 maybe?).
Originally, I used a comparison tool, but in the end found myself just making the edits in Notepad++.
7zip or some other compressing/deompressing tool that can add a file into an .apk file.
Zip-Align (available in the SDK tools and other places around XDA) - technically optional, but probably a good idea
Get all these things into a working folder, open your command prompt in that folder, test ADB, and then begin.
Main Instructions:
1. Make sure you have an unmodded copy of your framework files (twframework-res.apk and framework-res.apk)
you need have these available locally for your chosen method to decompile (I'm not going to describe how
to decompile in this thread, If you don't know how then this MOD is not for you)
2. Pull a copy of the SecSettings.apk
adb pull /system/priv-app/SecSettings.apk
3. Decompile SecSettings.apk (using your favorite tools I recomend Virtuous Ten Studio)
4. Edit classes_out\com\android\settings\deviceinfo\Status .smali manually (using Notepad++).
"Remove:" means to delete a line or remove a section entirely.
"Change:" means to look at the original code, and make it look like the "to" part.
NOTE depending on your ethod of decompiling you may not see the line numbers
however, if you do delete from the appropriate code section as well.
REMOVE:
Code:
.field private isSysScopeStatus:I
REMOVE:
Code:
.field private mSysScopeReceiver:Landroid/content/BroadcastReceiver;
REMOVE:
Code:
.line 264
new-instance v0, Lcom/android/settings/deviceinfo/Status$2;
invoke-direct {v0, p0}, Lcom/android/settings/deviceinfo/Status$2;-><init>(Lcom/android/settings/deviceinfo/Status;)V
iput-object v0, p0, Lcom/android/settings/deviceinfo/Status;->mSysScopeReceiver:Landroid/content/BroadcastReceiver;
REMOVE:
Code:
.line 216
const/4 v0, -0x1
iput v0, p0, Lcom/android/settings/deviceinfo/Status;->isSysScopeStatus:I
REMOVE:
Code:
.method static synthetic access$402(Lcom/android/settings/deviceinfo/Status;I)I
.registers 2
.parameter "x0"
.parameter "x1"
.prologue
.line 102
iput p1, p0, Lcom/android/settings/deviceinfo/Status;->isSysScopeStatus:I
return p1
.end method
.method static synthetic access$500(Lcom/android/settings/deviceinfo/Status;)V
.registers 1
.parameter "x0"
.prologue
.line 102
invoke-direct {p0}, Lcom/android/settings/deviceinfo/Status;->changeSysScopeStatus()V
return-void
.end method
REMOVE:
Code:
.line 687
iget-object v0, p0, Lcom/android/settings/deviceinfo/Status;->mSysScopeReceiver:Landroid/content/BroadcastReceiver;
invoke-virtual {p0, v0}, Lcom/android/settings/deviceinfo/Status;->unregisterReceiver(Landroid/content/BroadcastReceiver;)V
REMOVE:
Code:
.line 657
iget-object v1, p0, Lcom/android/settings/deviceinfo/Status;->mSysScopeReceiver:Landroid/content/BroadcastReceiver;
new-instance v2, Landroid/content/IntentFilter;
const-string v3, "com.sec.intent.action.SYSSCOPESTATUS"
invoke-direct {v2, v3}, Landroid/content/IntentFilter;-><init>(Ljava/lang/String;)V
invoke-virtual {p0, v1, v2}, Lcom/android/settings/deviceinfo/Status;->registerReceiver(Landroid/content/BroadcastReceiver;Landroid/content/IntentFilter;)Landroid/content/Intent;
CHANGE: Take note at this part you will need to locate some specific values from within /res/values/public.xml
Open /res/values/public.xml and search for "<public type="string" name="sysscope_tampered" id="0x7f0901a7" />"
and also for "<public type="string" name="sysscope_normal" id="0x7f0901a6" />" and also for
"<public type="string" name="sysscope_status" id="0x7f0901a5" />"
note the IDs you will need these values in the next section. (This is official NCE release your release
may have a different value.) Make sure you change the bolded values to match your own.
Code:
.line 952
const v1, 0x7f0901a7
TO:
Code:
.line 952
const v1, [B]0x7f0901a5[/B]
CHANGE:
Code:
.method private changeSysScopeStatus()V
.registers 8
.prologue
const-wide/16 v3, 0x3e8
const v6, 0x7f0901a7
const/4 v5, -0x1
.line 956
const-string v0, "sysscope_status"
invoke-virtual {p0, v0}, Lcom/android/settings/deviceinfo/Status;->findPreference(Ljava/lang/CharSequence;)Landroid/preference/Preference;
move-result-object v2
.line 958
invoke-static {}, Landroid/os/SystemClock;->uptimeMillis()J
move-result-wide v0
div-long/2addr v0, v3
.line 959
invoke-static {}, Landroid/os/SystemClock;->elapsedRealtime()J
move-result-wide v0
div-long/2addr v0, v3
.line 961
const-wide/16 v3, 0x0
cmp-long v3, v0, v3
if-nez v3, :cond_1e
.line 962
const-wide/16 v0, 0x1
.line 965
:cond_1e
iget v3, p0, Lcom/android/settings/deviceinfo/Status;->isSysScopeStatus:I
if-ne v3, v5, :cond_30
const-wide/16 v3, 0x78
cmp-long v0, v0, v3
if-lez v0, :cond_30
.line 966
invoke-virtual {p0, v6}, Lcom/android/settings/deviceinfo/Status;->getString(I)Ljava/lang/String;
move-result-object v0
.line 977
:goto_2c
invoke-virtual {v2, v0}, Landroid/preference/Preference;->setSummary(Ljava/lang/CharSequence;)V
.line 978
return-void
.line 968
:cond_30
iget v0, p0, Lcom/android/settings/deviceinfo/Status;->isSysScopeStatus:I
const/4 v1, 0x2
if-ne v0, v1, :cond_3a
.line 969
invoke-virtual {p0, v6}, Lcom/android/settings/deviceinfo/Status;->getString(I)Ljava/lang/String;
move-result-object v0
goto :goto_2c
.line 970
:cond_3a
iget v0, p0, Lcom/android/settings/deviceinfo/Status;->isSysScopeStatus:I
if-ne v0, v5, :cond_46
.line 971
const v0, 0x7f09013f
invoke-virtual {p0, v0}, Lcom/android/settings/deviceinfo/Status;->getString(I)Ljava/lang/String;
move-result-object v0
goto :goto_2c
.line 973
:cond_46
const v0, 0x7f09013d
invoke-virtual {p0, v0}, Lcom/android/settings/deviceinfo/Status;->getString(I)Ljava/lang/String;
move-result-object v0
goto :goto_2c
.end method
TO:
Code:
.method private changeSysScopeStatus()V
.registers 4
.prologue
[B]const v1, 0x7f0901a6[/B]
.line 956
const-string v0, "sysscope_status"
invoke-virtual {p0, v0}, Lcom/android/settings/deviceinfo/Status;->findPreference(Ljava/lang/CharSequence;)Landroid/preference/Preference;
move-result-object v2
.line 966
invoke-virtual {p0, v1}, Lcom/android/settings/deviceinfo/Status;->getString(I)Ljava/lang/String;
move-result-object v0
.line 977
invoke-virtual {v2, v0}, Landroid/preference/Preference;->setSummary(Ljava/lang/CharSequence;)V
.line 978
return-void
.end method
Delete: /smali/com/android/settings/deviceinfo/status$2.smali
re-compile SecSettings.apk
INSTALL:
Install! Use "adb shell" to begin, and use the following commands, one at a time:
rm /system/app/SysScope.apk
rm -r /data/dalvik-cache/*
push SecSettings.apk /system/priv-app/SecSettings.apk
chmod 0644 /system/priv-app/SecSettings.apk
reboot
Click to expand...
Click to collapse
reserved
reserved
Nice. People with o.c.d. are gonna love this. Nice work.
The Gods Approve This Post, From The Ghost Of Sparta's S5 active.
GDofWR420 said:
Nice. People with o.c.d. are gonna love this. Nice work.
The Gods Approve This Post, From The Ghost Of Sparta's S5 active.
Click to expand...
Click to collapse
LOL. Yea it was my OCD that drove me to make Aou's mod work for us, of course now I'm half blind and hyped up on starbucks doubleshots but what the heck right?
cstayton said:
LOL. Yea it was my OCD that drove me to make Aou's mod work for us, of course now I'm half blind and hyped up on starbucks doubleshots but what the heck right?
Click to expand...
Click to collapse
Lol. Yea no coffee this morning but I found an ice cold Sunkist that will do in a pinch. Country living make you to lazy to go to the store. OCD here to.
Would it be possible to get a tutorial on changing over scroll glowing or maybe you have a link you know of.:sly:
The Gods Approve This Post, From The Ghost Of Sparta's S5 active.
Here is not working
The last step are only to change the
Code:
const v6, 0x7f0901a7
for
Code:
const v1, 0x7f0901a6
?
or change this
Code:
.method private changeSysScopeStatus()V
.registers 8
.prologue
const-wide/16 v3, 0x3e8
const v6, 0x7f0901a7
const/4 v5, -0x1
.line 956
const-string v0, "sysscope_status"
invoke-virtual {p0, v0}, Lcom/android/settings/deviceinfo/Status;->findPreference(Ljava/lang/CharSequence;)Landroid/preference/Preference;
move-result-object v2
.line 958
invoke-static {}, Landroid/os/SystemClock;->uptimeMillis()J
move-result-wide v0
div-long/2addr v0, v3
.line 959
invoke-static {}, Landroid/os/SystemClock;->elapsedRealtime()J
move-result-wide v0
div-long/2addr v0, v3
.line 961
const-wide/16 v3, 0x0
cmp-long v3, v0, v3
if-nez v3, :cond_1e
.line 962
const-wide/16 v0, 0x1
.line 965
:cond_1e
iget v3, p0, Lcom/android/settings/deviceinfo/Status;->isSysScopeStatus:I
if-ne v3, v5, :cond_30
const-wide/16 v3, 0x78
cmp-long v0, v0, v3
if-lez v0, :cond_30
.line 966
invoke-virtual {p0, v6}, Lcom/android/settings/deviceinfo/Status;->getString(I)Ljava/lang/String;
move-result-object v0
.line 977
:goto_2c
invoke-virtual {v2, v0}, Landroid/preference/Preference;->setSummary(Ljava/lang/CharSequence;)V
.line 978
return-void
.line 968
:cond_30
iget v0, p0, Lcom/android/settings/deviceinfo/Status;->isSysScopeStatus:I
const/4 v1, 0x2
if-ne v0, v1, :cond_3a
.line 969
invoke-virtual {p0, v6}, Lcom/android/settings/deviceinfo/Status;->getString(I)Ljava/lang/String;
move-result-object v0
goto :goto_2c
.line 970
:cond_3a
iget v0, p0, Lcom/android/settings/deviceinfo/Status;->isSysScopeStatus:I
if-ne v0, v5, :cond_46
.line 971
const v0, 0x7f09013f
invoke-virtual {p0, v0}, Lcom/android/settings/deviceinfo/Status;->getString(I)Ljava/lang/String;
move-result-object v0
goto :goto_2c
.line 973
:cond_46
const v0, 0x7f09013d
invoke-virtual {p0, v0}, Lcom/android/settings/deviceinfo/Status;->getString(I)Ljava/lang/String;
move-result-object v0
goto :goto_2c
.end method
for this
Code:
.method private changeSysScopeStatus()V
.registers 4
.prologue
const v1, 0x7f0901a6
.line 956
const-string v0, "sysscope_status"
invoke-virtual {p0, v0}, Lcom/android/settings/deviceinfo/Status;->findPreference(Ljava/lang/CharSequence;)Landroid/preference/Preference;
move-result-object v2
.line 966
invoke-virtual {p0, v1}, Lcom/android/settings/deviceinfo/Status;->getString(I)Ljava/lang/String;
move-result-object v0
.line 977
invoke-virtual {v2, v0}, Landroid/preference/Preference;->setSummary(Ljava/lang/CharSequence;)V
.line 978
return-void
.end method
?
eric-filth said:
Here is not working
The last step are only to change the
Code:
const v6, 0x7f0901a7
for
Code:
const v1, 0x7f0901a6
?
or change this
Code:
.method private changeSysScopeStatus()V
.registers 8
.prologue
const-wide/16 v3, 0x3e8
const v6, 0x7f0901a7
const/4 v5, -0x1
.line 956
const-string v0, "sysscope_status"
invoke-virtual {p0, v0}, Lcom/android/settings/deviceinfo/Status;->findPreference(Ljava/lang/CharSequence;)Landroid/preference/Preference;
move-result-object v2
.line 958
invoke-static {}, Landroid/os/SystemClock;->uptimeMillis()J
move-result-wide v0
div-long/2addr v0, v3
.line 959
invoke-static {}, Landroid/os/SystemClock;->elapsedRealtime()J
move-result-wide v0
div-long/2addr v0, v3
.line 961
const-wide/16 v3, 0x0
cmp-long v3, v0, v3
if-nez v3, :cond_1e
.line 962
const-wide/16 v0, 0x1
.line 965
:cond_1e
iget v3, p0, Lcom/android/settings/deviceinfo/Status;->isSysScopeStatus:I
if-ne v3, v5, :cond_30
const-wide/16 v3, 0x78
cmp-long v0, v0, v3
if-lez v0, :cond_30
.line 966
invoke-virtual {p0, v6}, Lcom/android/settings/deviceinfo/Status;->getString(I)Ljava/lang/String;
move-result-object v0
.line 977
:goto_2c
invoke-virtual {v2, v0}, Landroid/preference/Preference;->setSummary(Ljava/lang/CharSequence;)V
.line 978
return-void
.line 968
:cond_30
iget v0, p0, Lcom/android/settings/deviceinfo/Status;->isSysScopeStatus:I
const/4 v1, 0x2
if-ne v0, v1, :cond_3a
.line 969
invoke-virtual {p0, v6}, Lcom/android/settings/deviceinfo/Status;->getString(I)Ljava/lang/String;
move-result-object v0
goto :goto_2c
.line 970
:cond_3a
iget v0, p0, Lcom/android/settings/deviceinfo/Status;->isSysScopeStatus:I
if-ne v0, v5, :cond_46
.line 971
const v0, 0x7f09013f
invoke-virtual {p0, v0}, Lcom/android/settings/deviceinfo/Status;->getString(I)Ljava/lang/String;
move-result-object v0
goto :goto_2c
.line 973
:cond_46
const v0, 0x7f09013d
invoke-virtual {p0, v0}, Lcom/android/settings/deviceinfo/Status;->getString(I)Ljava/lang/String;
move-result-object v0
goto :goto_2c
.end method
for this
Code:
.method private changeSysScopeStatus()V
.registers 4
.prologue
const v1, 0x7f0901a6
.line 956
const-string v0, "sysscope_status"
invoke-virtual {p0, v0}, Lcom/android/settings/deviceinfo/Status;->findPreference(Ljava/lang/CharSequence;)Landroid/preference/Preference;
move-result-object v2
.line 966
invoke-virtual {p0, v1}, Lcom/android/settings/deviceinfo/Status;->getString(I)Ljava/lang/String;
move-result-object v0
.line 977
invoke-virtual {v2, v0}, Landroid/preference/Preference;->setSummary(Ljava/lang/CharSequence;)V
.line 978
return-void
.end method
?
Click to expand...
Click to collapse
you need to change the whole method out the lines with the ID are what you need to look up in your build to match to the appropriate status response.
GDofWR420 said:
Lol. Yea no coffee this morning but I found an ice cold Sunkist that will do in a pinch. Country living make you to lazy to go to the store. OCD here to.
Would it be possible to get a tutorial on changing over scroll glowing or maybe you have a link you know of.:sly:
The Gods Approve This Post, From The Ghost Of Sparta's S5 active.
Click to expand...
Click to collapse
I'll see if i can find one for overscroll, its a pretty common mod i used to use it in the days of CM7
cstayton said:
I'll see if i can find one for overscroll, its a pretty common mod i used to use it in the days of CM7
Click to expand...
Click to collapse
Actually I found a module for xposed called xuimodule it allows for over scroll color change. Works OK on stock but with the koolkit.xml it's a little funky as I believe it was causing some lag so I removed it and lag is gone.
Sent from my SAMSUNG-SM-G870A using XDA Premium 4 mobile app
GDofWR420 said:
Actually I found a module for xposed called xuimodule it allows for over scroll color change. Works OK on stock but with the koolkit.xml it's a little funky as I believe it was causing some lag so I removed it and lag is gone.
Sent from my SAMSUNG-SM-G870A using XDA Premium 4 mobile app
Click to expand...
Click to collapse
hmmmm, i wonder if it has an entry in csc that it couldnt handle because its locked down? I might have to re-think the whole "xPosed-Proof" feature mod.
Hey, followed your CIQ removal guide and everything went perfectly. I've checked for any CIQ threads or network traffic and there is none. Job very well done.
However, with this guide, I am finding I have /system/app/SysScope.apk but no SecSettings.apk. I have a bunch of other APKs that begin with the Sec prefix but no SecSettings.apk. Any ideas?
EDIT: Found it under /system/priv-app/SecSettings.apk. You should update the pull command in the guide.
EDIT2: Can't find /res/values/public.xml file that contains any mention of sysscope, checked framework-res.apk and twframework-res.apk as well as SecSettings.apk. No luck. Is the definition somewhere else perhaps?
EDIT3: Perhaps this is tied to the fact that I can only open SecSettings.apk for editing if I chose "basic editing" in the import. If I try for advanced editing, I get a slew of decompilation errors, regardless of which FrameworkTag I pick.
Decompilation errors that occur if I try to decomp with aapt are the same as the ones I see if I try to do "advanced editing". I've tried both framework tags when importing and I always get these errors during unpack. I have a feeling that "basic editing" doesn't fully unpack the res directory as needed and advanced is having trouble with the XML parse.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
deduction said:
Hey, followed your CIQ removal guide and everything went perfectly. I've checked for any CIQ threads or network traffic and there is none. Job very well done.
However, with this guide, I am finding I have /system/app/SysScope.apk but no SecSettings.apk. I have a bunch of other APKs that begin with the Sec prefix but no SecSettings.apk. Any ideas?
EDIT: Found it under /system/priv-app/SecSettings.apk. You should update the pull command in the guide.
EDIT2: Can't find /res/values/public.xml file that contains any mention of sysscope, checked framework-res.apk and twframework-res.apk as well as SecSettings.apk. No luck. Is the definition somewhere else perhaps?
EDIT3: Perhaps this is tied to the fact that I can only open SecSettings.apk for editing if I chose "basic editing" in the import. If I try for advanced editing, I get a slew of decompilation errors, regardless of which FrameworkTag I pick.
Decompilation errors that occur if I try to decomp with aapt are the same as the ones I see if I try to do "advanced editing". I've tried both framework tags when importing and I always get these errors during unpack. I have a feeling that "basic editing" doesn't fully unpack the res directory as needed and advanced is having trouble with the XML parse.
Click to expand...
Click to collapse
try tickle my android on here.. its mainly for theming but i had success with de/recompiling apks and you can edit the files needed for any mod before recompiling
Sent from my SM-G900V using XDA Free mobile app
---------- Post added at 10:08 AM ---------- Previous post was at 10:04 AM ----------
cstayton said:
How to permenantly remove SysScope from your Samsung Touchwiz ROM
Tired of the constant custom padlock on startup? Want permenant device status "Official"?
NOTICE:
Prerequisites:
You need java installed and working at the command prompt.
You need smali and baksmali in your working directory. I used v1.4.2 of each. Here's some links: baksmali and smali.
Basic ADB skills
A good text editor, such as Notepad++. Even better, and good text comparison tool would be great to check your work (get a trial of Beyond Compare 3 maybe?).
Originally, I used a comparison tool, but in the end found myself just making the edits in Notepad++.
7zip or some other compressing/deompressing tool that can add a file into an .apk file.
Zip-Align (available in the SDK tools and other places around XDA) - technically optional, but probably a good idea
Get all these things into a working folder, open your command prompt in that folder, test ADB, and then begin.
Main Instructions:
1. Make sure you have an unmodded copy of your framework files (twframework-res.apk and framework-res.apk)
you need have these available locally for your chosen method to decompile (I'm not going to describe how
to decompile in this thread, If you don't know how then this MOD is not for you)
2. Pull a copy of the SecSettings.apk
adb pull /system/app/SecSettings.apk
3. Decompile SecSettings.apk (using your favorite tools I recomend Virtuous Ten Studio)
4. Edit classes_out\com\android\settings\deviceinfo\Status .smali manually (using Notepad++).
"Remove:" means to delete a line or remove a section entirely.
"Change:" means to look at the original code, and make it look like the "to" part.
NOTE depending on your ethod of decompiling you may not see the line numbers
however, if you do delete from the appropriate code section as well.
REMOVE:
Code:
.field private isSysScopeStatus:I
REMOVE:
Code:
.field private mSysScopeReceiver:Landroid/content/BroadcastReceiver;
REMOVE:
Code:
.line 264
new-instance v0, Lcom/android/settings/deviceinfo/Status$2;
invoke-direct {v0, p0}, Lcom/android/settings/deviceinfo/Status$2;-><init>(Lcom/android/settings/deviceinfo/Status;)V
iput-object v0, p0, Lcom/android/settings/deviceinfo/Status;->mSysScopeReceiver:Landroid/content/BroadcastReceiver;
REMOVE:
Code:
.line 216
const/4 v0, -0x1
iput v0, p0, Lcom/android/settings/deviceinfo/Status;->isSysScopeStatus:I
REMOVE:
Code:
.method static synthetic access$402(Lcom/android/settings/deviceinfo/Status;I)I
.registers 2
.parameter "x0"
.parameter "x1"
.prologue
.line 102
iput p1, p0, Lcom/android/settings/deviceinfo/Status;->isSysScopeStatus:I
return p1
.end method
.method static synthetic access$500(Lcom/android/settings/deviceinfo/Status;)V
.registers 1
.parameter "x0"
.prologue
.line 102
invoke-direct {p0}, Lcom/android/settings/deviceinfo/Status;->changeSysScopeStatus()V
return-void
.end method
REMOVE:
Code:
.line 687
iget-object v0, p0, Lcom/android/settings/deviceinfo/Status;->mSysScopeReceiver:Landroid/content/BroadcastReceiver;
invoke-virtual {p0, v0}, Lcom/android/settings/deviceinfo/Status;->unregisterReceiver(Landroid/content/BroadcastReceiver;)V
REMOVE:
Code:
.line 657
iget-object v1, p0, Lcom/android/settings/deviceinfo/Status;->mSysScopeReceiver:Landroid/content/BroadcastReceiver;
new-instance v2, Landroid/content/IntentFilter;
const-string v3, "com.sec.intent.action.SYSSCOPESTATUS"
invoke-direct {v2, v3}, Landroid/content/IntentFilter;-><init>(Ljava/lang/String;)V
invoke-virtual {p0, v1, v2}, Lcom/android/settings/deviceinfo/Status;->registerReceiver(Landroid/content/BroadcastReceiver;Landroid/content/IntentFilter;)Landroid/content/Intent;
CHANGE: Take note at this part you will need to locate some specific values from within /res/values/public.xml
Open /res/values/public.xml and search for "<public type="string" name="sysscope_tampered" id="0x7f0901a7" />"
and also for "<public type="string" name="sysscope_normal" id="0x7f0901a6" />" and also for
"<public type="string" name="sysscope_status" id="0x7f0901a5" />"
note the IDs you will need these values in the next section. (This is official NCE release your release
may have a different value.) Make sure you change the bolded values to match your own.
Code:
.line 952
const v1, 0x7f0901a7
TO:
Code:
.line 952
const v1, [B]0x7f0901a5[/B]
CHANGE:
Code:
.method private changeSysScopeStatus()V
.registers 8
.prologue
const-wide/16 v3, 0x3e8
const v6, 0x7f0901a7
const/4 v5, -0x1
.line 956
const-string v0, "sysscope_status"
invoke-virtual {p0, v0}, Lcom/android/settings/deviceinfo/Status;->findPreference(Ljava/lang/CharSequence;)Landroid/preference/Preference;
move-result-object v2
.line 958
invoke-static {}, Landroid/os/SystemClock;->uptimeMillis()J
move-result-wide v0
div-long/2addr v0, v3
.line 959
invoke-static {}, Landroid/os/SystemClock;->elapsedRealtime()J
move-result-wide v0
div-long/2addr v0, v3
.line 961
const-wide/16 v3, 0x0
cmp-long v3, v0, v3
if-nez v3, :cond_1e
.line 962
const-wide/16 v0, 0x1
.line 965
:cond_1e
iget v3, p0, Lcom/android/settings/deviceinfo/Status;->isSysScopeStatus:I
if-ne v3, v5, :cond_30
const-wide/16 v3, 0x78
cmp-long v0, v0, v3
if-lez v0, :cond_30
.line 966
invoke-virtual {p0, v6}, Lcom/android/settings/deviceinfo/Status;->getString(I)Ljava/lang/String;
move-result-object v0
.line 977
:goto_2c
invoke-virtual {v2, v0}, Landroid/preference/Preference;->setSummary(Ljava/lang/CharSequence;)V
.line 978
return-void
.line 968
:cond_30
iget v0, p0, Lcom/android/settings/deviceinfo/Status;->isSysScopeStatus:I
const/4 v1, 0x2
if-ne v0, v1, :cond_3a
.line 969
invoke-virtual {p0, v6}, Lcom/android/settings/deviceinfo/Status;->getString(I)Ljava/lang/String;
move-result-object v0
goto :goto_2c
.line 970
:cond_3a
iget v0, p0, Lcom/android/settings/deviceinfo/Status;->isSysScopeStatus:I
if-ne v0, v5, :cond_46
.line 971
const v0, 0x7f09013f
invoke-virtual {p0, v0}, Lcom/android/settings/deviceinfo/Status;->getString(I)Ljava/lang/String;
move-result-object v0
goto :goto_2c
.line 973
:cond_46
const v0, 0x7f09013d
invoke-virtual {p0, v0}, Lcom/android/settings/deviceinfo/Status;->getString(I)Ljava/lang/String;
move-result-object v0
goto :goto_2c
.end method
TO:
Code:
.method private changeSysScopeStatus()V
.registers 4
.prologue
[B]const v1, 0x7f0901a6[/B]
.line 956
const-string v0, "sysscope_status"
invoke-virtual {p0, v0}, Lcom/android/settings/deviceinfo/Status;->findPreference(Ljava/lang/CharSequence;)Landroid/preference/Preference;
move-result-object v2
.line 966
invoke-virtual {p0, v1}, Lcom/android/settings/deviceinfo/Status;->getString(I)Ljava/lang/String;
move-result-object v0
.line 977
invoke-virtual {v2, v0}, Landroid/preference/Preference;->setSummary(Ljava/lang/CharSequence;)V
.line 978
return-void
.end method
INSTALL:
Click to expand...
Click to collapse
hey.. had question bout install method.. i assume it to be ok to just remove syscope.apk from rom and then add modded secsettings.apk to priv-app folder in rom base and flashing rom will work?
Sent from my SM-G900V using XDA Free mobile app
elliwigy said:
try tickle my android on here.. its mainly for theming but i had success with de/recompiling apks and you can edit the files needed for any mod before recompiling
Sent from my SM-G900V using XDA Free mobile app
---------- Post added at 10:08 AM ---------- Previous post was at 10:04 AM ----------
hey.. had question bout install method.. i assume it to be ok to just remove syscope.apk from rom and then add modded secsettings.apk to priv-app folder in rom base and flashing rom will work?
Sent from my SM-G900V using XDA Free mobile app
Click to expand...
Click to collapse
from the error looks as if you are trying to decompile with the wrong frameworks youll need to make sure the framework-res.apk and twframework-res.apk are the ones unmodded stock ones from your rom base
elliwigy said:
try tickle my android on here.. its mainly for theming but i had success with de/recompiling apks and you can edit the files needed for any mod before recompiling
Sent from my SM-G900V using XDA Free mobile app
---------- Post added at 10:08 AM ---------- Previous post was at 10:04 AM ----------
hey.. had question bout install method.. i assume it to be ok to just remove syscope.apk from rom and then add modded secsettings.apk to priv-app folder in rom base and flashing rom will work?
Sent from my SM-G900V using XDA Free mobile app
Click to expand...
Click to collapse
once you have the mod completed yes, remove sysscope.apk and place modded secsettings in rom base and flash
ok...can you take a look at these? I get about half way through your guide and then it gets lost. I don't know if the info just isnt there or what?
Thanks!
deduction said:
Hey, followed your CIQ removal guide and everything went perfectly. I've checked for any CIQ threads or network traffic and there is none. Job very well done.
However, with this guide, I am finding I have /system/app/SysScope.apk but no SecSettings.apk. I have a bunch of other APKs that begin with the Sec prefix but no SecSettings.apk. Any ideas?
EDIT: Found it under /system/priv-app/SecSettings.apk. You should update the pull command in the guide.
EDIT2: Can't find /res/values/public.xml file that contains any mention of sysscope, checked framework-res.apk and twframework-res.apk as well as SecSettings.apk. No luck. Is the definition somewhere else perhaps?
EDIT3: Perhaps this is tied to the fact that I can only open SecSettings.apk for editing if I chose "basic editing" in the import. If I try for advanced editing, I get a slew of decompilation errors, regardless of which FrameworkTag I pick.
Decompilation errors that occur if I try to decomp with aapt are the same as the ones I see if I try to do "advanced editing". I've tried both framework tags when importing and I always get these errors during unpack. I have a feeling that "basic editing" doesn't fully unpack the res directory as needed and advanced is having trouble with the XML parse.
Click to expand...
Click to collapse
your not looking sysscope your actually looking for " <public type="string" name="sysscope_normal" you have to be specific in the search
am having trouble getting dropbox or anywhere to work. Here is the untouched status.smali.
Thanks very much...I keep getting stumped because the edits I need to make just don't seem to be there when I decompile the apk. Not sure why.
small change in OP
small change in OP
Delete: /smali/com/android/settings/deviceinfo/status$2.smali
re-compile SecSettings.apk
Hello.thanks man. Working great on my 5.1.1 Samsung note edge ROM..
regards
@cstayton
"<public type="string" name="sysscope_tampered" id="0x7f0a01be" />"
and also for "<public type="string" name="sysscope_normal" id="0x7f0a01bd" />" and also for
"<public type="string" name="sysscope_status" id="0x7f0a01bc" />"
Those are my public values.
Im having trouble with the last Change. I have changed and removed everything else, could you help me with the last step? Im not sure what needs to be changed. My smali.status should be attached. any help is appreciated. thank you
Assalamualaikum
Hello guys, i want to share a simple guide with you
WHAT IS IT?
it's a guide to make a partition info in the Settings.apk
Source:
SCREENSHOT
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Ok, let's start working on it
WHATS NEEDED?
- Brain
- A cup of coffe
- Use Apktool v 2.0.0 beta 9
- Settings.apk
- Attachment file
1. Decompile your Settings.apk
2. Download and extrack Attachment file and place it in the right place
3. Go to the ~\Settings\res\values\strings.xml
Add this code below before </resources>
Code:
<string name="partition_info_title">Partition info</string>
<string name="partition_info_system">/system</string>
<string name="partition_info_data">/data</string>
<string name="partition_info_cache">/cache</string>
<string name="partition_info_sdcard">/sdcard (FAT)</string>
<string name="partition_info_sdext">/sd-ext (EXT)</string>
<string name="partition_info_used_of">/</string>
<string name="nol">Unavailable</string>
</resources>
3. Go to the ~\Settings\res\xml\settings_headers.xml
Add this code below wherever you want inside settings_headers.xml
Code:
<header android:icon="@drawable/partition_info" android:title="@string/partition_info_title">
<intent android:targetPackage="com.android.settings" android:action="com.android.action.MAIN" android:targetClass="com.android.settings.ktech.PartitionInfo" />
</header>
4. Compile your Settings.apk and decompile again
5. Go to ~\Settings\AndroidManifest.xml
Code:
<activity android:label="@string/partition_info_title" android:name=".ktech.PartitionInfo">
<intent-filter>
<action android:name="android.intent.action.MAIN"/>
<category android:name="android.intent.category.DEFAULT"/>
<category android:name="android.intent.category.VOICE_LAUNCH"/>
</intent-filter>
</activity>
6. Go to the ~\Settings\smali\com\android\settings\ktech\PartitionInfo.smali
Find & replace this code below with your public id
Code:
Line 110 0x7f080403 public type="string" name="partition_info_used_of"
Line 189 0x7f050043 public type="xml" name="partition_info"
7. Recompile Settings.apk then Sign it
8. Push it in your phone
hi i have one problem i make all the steps and im getting fc of settings when im pushing ''partition info'' and then i see that after decompile (the second decompile) the partition_info is in pyblic type drawable and not in pyblic type xml im trying 5 times but nothing (sorry for my bad english)
G.M.L said:
hi i have one problem i make all the steps and im getting fc of settings when im pushing ''partition info'' and then i see that after decompile (the second decompile) the partition_info is in pyblic type drawable and not in pyblic type xml im trying 5 times but nothing (sorry for my bad english)
Click to expand...
Click to collapse
Post your log here
Here is it
OK I made it I changed the icon name in drawable-hdpi and after decomplile (the second time) in public the names are correct thanks k_tech!!!!!!
G.M.L.
G.M.L said:
OK I made it I changed the icon name in drawable-hdpi and after decomplile (the second time) in public the names are correct thanks k_tech!!!!!!
G.M.L.
Click to expand...
Click to collapse
Ok, good job
Thx sir, its work on my LG P713 (4.1.2)
Thx sir...
step6 is little confusing....could u plz be in detail.
rrajesh011 said:
step6 is little confusing....could u plz be in detail.
Click to expand...
Click to collapse
Open smali/com/android/settings/k_tech/partitioninfo.smali and leave it open
Open value/public.xml and find
type=string name=partition_info_used_of id=this number copy and paste to partition info.smali in line 1100
And
type=xml name=partition_info id=this number copy and paste in partition info.Smali in line 1890
Compile and its ready!!!
G.M.L.
G.M.L said:
Open smali/com/android/settings/k_tech/partitioninfo.smali and leave it open
Open value/public.xml and find
type=string name=partition_info_used_of id=this number copy and paste to partition info.smali in line 1100
And
type=xml name=partition_info id=this number copy and paste in partition info.Smali in line 1890
Compile and its ready!!!
G.M.L.
Click to expand...
Click to collapse
this is my partitioninfo.smali i didnot find line 189. i found line 110 but where to add public id.
Code:
.class public Lcom/android/settings/ktech/PartitionInfo;
.super Landroid/preference/PreferenceActivity;
.source "PartitionInfo.java"
# instance fields
.field private extfsIsMounted:Z
.field private mCachePartSize:Landroid/preference/Preference;
.field private mDataPartSize:Landroid/preference/Preference;
.field private mSDCardPartEXTSize:Landroid/preference/Preference;
.field private mSDCardPartFATSize:Landroid/preference/Preference;
.field private mSystemPartSize:Landroid/preference/Preference;
# direct methods
.method public constructor <init>()V
.locals 1
.prologue
.line 45
invoke-direct {p0}, Landroid/preference/PreferenceActivity;-><init>()V
.line 60
const/4 v0, 0x0
iput-boolean v0, p0, Lcom/android/settings/ktech/PartitionInfo;->extfsIsMounted:Z
return-void
.end method
.method private ObtainFSPartSize(Ljava/lang/String;)Ljava/lang/String;
.locals 11
.param p1, "PartitionPath" # Ljava/lang/String;
.prologue
.line 103
new-instance v4, Ljava/io/File;
invoke-direct {v4, p1}, Ljava/io/File;-><init>(Ljava/lang/String;)V
.line 104
.local v4, "extraPath":Ljava/io/File;
new-instance v5, Landroid/os/StatFs;
invoke-virtual {v4}, Ljava/io/File;->getPath()Ljava/lang/String;
move-result-object v7
invoke-direct {v5, v7}, Landroid/os/StatFs;-><init>(Ljava/lang/String;)V
.line 105
.local v5, "extraStat":Landroid/os/StatFs;
invoke-virtual {v5}, Landroid/os/StatFs;->getBlockSize()I
move-result v7
int-to-long v0, v7
.line 106
.local v0, "eBlockSize":J
invoke-virtual {v5}, Landroid/os/StatFs;->getBlockCount()I
move-result v7
int-to-long v2, v7
.line 107
.local v2, "eTotalBlocks":J
mul-long v7, v2, v0
invoke-virtual {v5}, Landroid/os/StatFs;->getAvailableBlocks()I
move-result v9
int-to-long v9, v9
mul-long/2addr v9, v0
sub-long/2addr v7, v9
invoke-static {p0, v7, v8}, Landroid/text/format/Formatter;->formatFileSize(Landroid/content/Context;J)Ljava/lang/String;
move-result-object v6
.line 108
.local v6, "retstr":Ljava/lang/String;
new-instance v7, Ljava/lang/StringBuilder;
invoke-direct {v7}, Ljava/lang/StringBuilder;-><init>()V
invoke-virtual {v7, v6}, Ljava/lang/StringBuilder;->append(Ljava/lang/String;)Ljava/lang/StringBuilder;
move-result-object v7
const-string v8, " "
invoke-virtual {v7, v8}, Ljava/lang/StringBuilder;->append(Ljava/lang/String;)Ljava/lang/StringBuilder;
move-result-object v7
invoke-virtual {p0}, Lcom/android/settings/ktech/PartitionInfo;->getResources()Landroid/content/res/Resources;
move-result-object v8
const v9, 0x7f080403
invoke-virtual {v8, v9}, Landroid/content/res/Resources;->getString(I)Ljava/lang/String;
move-result-object v8
invoke-virtual {v7, v8}, Ljava/lang/StringBuilder;->append(Ljava/lang/String;)Ljava/lang/StringBuilder;
move-result-object v7
const-string v8, " "
invoke-virtual {v7, v8}, Ljava/lang/StringBuilder;->append(Ljava/lang/String;)Ljava/lang/StringBuilder;
move-result-object v7
invoke-virtual {v7}, Ljava/lang/StringBuilder;->toString()Ljava/lang/String;
move-result-object v6
.line 109
new-instance v7, Ljava/lang/StringBuilder;
invoke-direct {v7}, Ljava/lang/StringBuilder;-><init>()V
invoke-virtual {v7, v6}, Ljava/lang/StringBuilder;->append(Ljava/lang/String;)Ljava/lang/StringBuilder;
move-result-object v7
mul-long v8, v2, v0
invoke-static {p0, v8, v9}, Landroid/text/format/Formatter;->formatFileSize(Landroid/content/Context;J)Ljava/lang/String;
move-result-object v8
invoke-virtual {v7, v8}, Ljava/lang/StringBuilder;->append(Ljava/lang/String;)Ljava/lang/StringBuilder;
move-result-object v7
invoke-virtual {v7}, Ljava/lang/StringBuilder;->toString()Ljava/lang/String;
move-result-object v6
.line 110
return-object v6
.end method
# virtual methods
.method public fileExists(Ljava/lang/String;)Z
.locals 2
.param p1, "filename" # Ljava/lang/String;
.prologue
.line 114
new-instance v0, Ljava/io/File;
invoke-direct {v0, p1}, Ljava/io/File;-><init>(Ljava/lang/String;)V
.line 115
.local v0, "f":Ljava/io/File;
invoke-virtual {v0}, Ljava/io/File;->exists()Z
move-result v1
return v1
.end method
.method protected onCreate(Landroid/os/Bundle;)V
.locals 5
.param p1, "icicle" # Landroid/os/Bundle;
.prologue
const/4 v4, 0x1
.line 64
invoke-super {p0, p1}, Landroid/preference/PreferenceActivity;->onCreate(Landroid/os/Bundle;)V
.line 66
const v2, 0x7f050043
invoke-virtual {p0, v2}, Lcom/android/settings/ktech/PartitionInfo;->addPreferencesFromResource(I)V
.line 68
invoke-virtual {p0}, Lcom/android/settings/ktech/PartitionInfo;->getPreferenceScreen()Landroid/preference/PreferenceScreen;
move-result-object v1
.line 70
.local v1, "prefSet":Landroid/preference/PreferenceScreen;
const-string v2, "system_part_info"
invoke-virtual {v1, v2}, Landroid/preference/PreferenceScreen;->findPreference(Ljava/lang/CharSequence;)Landroid/preference/Preference;
move-result-object v2
iput-object v2, p0, Lcom/android/settings/ktech/PartitionInfo;->mSystemPartSize:Landroid/preference/Preference;
.line 71
const-string v2, "data_part_info"
invoke-virtual {v1, v2}, Landroid/preference/PreferenceScreen;->findPreference(Ljava/lang/CharSequence;)Landroid/preference/Preference;
move-result-object v2
iput-object v2, p0, Lcom/android/settings/ktech/PartitionInfo;->mDataPartSize:Landroid/preference/Preference;
.line 72
const-string v2, "cache_part_info"
invoke-virtual {v1, v2}, Landroid/preference/PreferenceScreen;->findPreference(Ljava/lang/CharSequence;)Landroid/preference/Preference;
move-result-object v2
iput-object v2, p0, Lcom/android/settings/ktech/PartitionInfo;->mCachePartSize:Landroid/preference/Preference;
.line 73
const-string v2, "sdcard_part_info_fat"
invoke-virtual {v1, v2}, Landroid/preference/PreferenceScreen;->findPreference(Ljava/lang/CharSequence;)Landroid/preference/Preference;
move-result-object v2
iput-object v2, p0, Lcom/android/settings/ktech/PartitionInfo;->mSDCardPartFATSize:Landroid/preference/Preference;
.line 74
const-string v2, "sdcard_part_info_ext"
invoke-virtual {v1, v2}, Landroid/preference/PreferenceScreen;->findPreference(Ljava/lang/CharSequence;)Landroid/preference/Preference;
move-result-object v2
iput-object v2, p0, Lcom/android/settings/ktech/PartitionInfo;->mSDCardPartEXTSize:Landroid/preference/Preference;
.line 76
const-string v2, "/dev/block/mmcblk0p2"
invoke-virtual {p0, v2}, Lcom/android/settings/ktech/PartitionInfo;->fileExists(Ljava/lang/String;)Z
move-result v2
if-ne v2, v4, :cond_0
.line 77
const-string v2, "PartitionInfo"
const-string v3, "sd: ext partition mounted"
invoke-static {v2, v3}, Landroid/util/Log;->i(Ljava/lang/String;Ljava/lang/String;)I
.line 78
iput-boolean v4, p0, Lcom/android/settings/ktech/PartitionInfo;->extfsIsMounted:Z
.line 84
:goto_0
:try_start_0
iget-object v2, p0, Lcom/android/settings/ktech/PartitionInfo;->mSystemPartSize:Landroid/preference/Preference;
const-string v3, "/system"
invoke-direct {p0, v3}, Lcom/android/settings/ktech/PartitionInfo;->ObtainFSPartSize(Ljava/lang/String;)Ljava/lang/String;
move-result-object v3
invoke-virtual {v2, v3}, Landroid/preference/Preference;->setSummary(Ljava/lang/CharSequence;)V
.line 85
iget-object v2, p0, Lcom/android/settings/ktech/PartitionInfo;->mDataPartSize:Landroid/preference/Preference;
const-string v3, "/data"
invoke-direct {p0, v3}, Lcom/android/settings/ktech/PartitionInfo;->ObtainFSPartSize(Ljava/lang/String;)Ljava/lang/String;
move-result-object v3
invoke-virtual {v2, v3}, Landroid/preference/Preference;->setSummary(Ljava/lang/CharSequence;)V
.line 86
iget-object v2, p0, Lcom/android/settings/ktech/PartitionInfo;->mCachePartSize:Landroid/preference/Preference;
const-string v3, "/cache"
invoke-direct {p0, v3}, Lcom/android/settings/ktech/PartitionInfo;->ObtainFSPartSize(Ljava/lang/String;)Ljava/lang/String;
move-result-object v3
invoke-virtual {v2, v3}, Landroid/preference/Preference;->setSummary(Ljava/lang/CharSequence;)V
.line 87
iget-object v2, p0, Lcom/android/settings/ktech/PartitionInfo;->mSDCardPartFATSize:Landroid/preference/Preference;
const-string v3, "/sdcard"
invoke-direct {p0, v3}, Lcom/android/settings/ktech/PartitionInfo;->ObtainFSPartSize(Ljava/lang/String;)Ljava/lang/String;
move-result-object v3
invoke-virtual {v2, v3}, Landroid/preference/Preference;->setSummary(Ljava/lang/CharSequence;)V
.line 89
iget-boolean v2, p0, Lcom/android/settings/ktech/PartitionInfo;->extfsIsMounted:Z
if-ne v2, v4, :cond_1
.line 90
iget-object v2, p0, Lcom/android/settings/ktech/PartitionInfo;->mSDCardPartEXTSize:Landroid/preference/Preference;
const-string v3, "/external_sd"
invoke-direct {p0, v3}, Lcom/android/settings/ktech/PartitionInfo;->ObtainFSPartSize(Ljava/lang/String;)Ljava/lang/String;
move-result-object v3
invoke-virtual {v2, v3}, Landroid/preference/Preference;->setSummary(Ljava/lang/CharSequence;)V
:try_end_0
.catch Ljava/lang/IllegalArgumentException; {:try_start_0 .. :try_end_0} :catch_0
.line 99
:goto_1
return-void
.line 80
:cond_0
const-string v2, "PartitionInfo"
const-string v3, "sd: ext partition not mounted"
invoke-static {v2, v3}, Landroid/util/Log;->i(Ljava/lang/String;Ljava/lang/String;)I
goto :goto_0
.line 92
:cond_1
:try_start_1
iget-object v2, p0, Lcom/android/settings/ktech/PartitionInfo;->mSDCardPartEXTSize:Landroid/preference/Preference;
const/4 v3, 0x0
invoke-virtual {v2, v3}, Landroid/preference/Preference;->setEnabled(Z)V
:try_end_1
.catch Ljava/lang/IllegalArgumentException; {:try_start_1 .. :try_end_1} :catch_0
goto :goto_1
.line 95
:catch_0
move-exception v0
.line 96
.local v0, "e":Ljava/lang/IllegalArgumentException;
invoke-virtual {v0}, Ljava/lang/IllegalArgumentException;->printStackTrace()V
goto :goto_1
.end method
Change
0x7f080403 in line 110 with the id of partition_info_used_of
and
0x7f050058 in line 189 with the id of partition_info
Thanks
nice sir.
but i have problem, for /sd-ext(EXT) is displayed unavailable. i have 16gb external storage..
My rom is stock 4.1.2 touchwiz.
hope can fix :fingers-crossed:
syaeful said:
nice sir.
but i have problem, for /sd-ext(EXT) is displayed unavailable. i have 16gb external storage..
My rom is stock 4.1.2 touchwiz.
hope can fix :fingers-crossed:
Click to expand...
Click to collapse
Try this smali and tell me if it work
G.M.L said:
Try this smali and tell me if it work
Click to expand...
Click to collapse
thanks sir... i will try and give feedback later
---------- Post added at 10:23 AM ---------- Previous post was at 10:04 AM ----------
Still same sir,,
syaeful said:
thanks sir... i will try and give feedback later
---------- Post added at 10:23 AM ---------- Previous post was at 10:04 AM ----------
Still same sir,,
Click to expand...
Click to collapse
I will check it again later and I will tell you
G.M.L.
syaeful said:
thanks sir... i will try and give feedback later
---------- Post added at 10:23 AM ---------- Previous post was at 10:04 AM ----------
Still same sir,,
Click to expand...
Click to collapse
in partition_info.xml try to change @string/nol with @string/status_unavailable and tell me
in Android_manifest.xml did you add the activity?
G.M.L said:
in partition_info.xml try to change @string/nol with @string/status_unavailable and tell me
in Android_manifest.xml did you add the activity?
Click to expand...
Click to collapse
i have done with manifest..
i wil try for strings. thanks before
G.M.L said:
Try this smali and tell me if it work
Click to expand...
Click to collapse
thank you. ROM cook me JB 4.1.2
i try this smali
HELLLO EVERYONE!! I AM BACK WITH MY GUIDE WHICH WILL HELP YOU REPLACE THE STANDARD PLATLOGO WITH THE LATEST LOLLIPOP PLATLOGO......REQUIREMENTS
[*]Apktool
[*]Java Runtime Environment
[*]Java Development Kit
[*]Notepad++
[*]A WORKING BRAIN!!
LETS GET STARTED.....
[*]Decompile Framework.jar
[*]goto framework.jar.out\smali\com\android\internal\app
[*]Open PlatLogoActivity.xml
[*]Replace The Whole Code With Mine
Code:
.class public Lcom/android/internal/app/PlatLogoActivity;
.super Landroid/app/Activity;
.source "PlatLogoActivity.java"
# direct methods
.method public constructor <init>()V
.locals 0
.prologue
.line 12
invoke-direct {p0}, Landroid/app/Activity;-><init>()V
return-void
.end method
# virtual methods
.method protected onCreate(Landroid/os/Bundle;)V
.locals 5
.param p1, "savedInstanceState" # Landroid/os/Bundle;
.prologue
.line 16
invoke-super {p0, p1}, Landroid/app/Activity;->onCreate(Landroid/os/Bundle;)V
.line 18
new-instance v1, Landroid/content/Intent;
const-string v2, "android.intent.action.MAIN"
invoke-direct {v1, v2}, Landroid/content/Intent;-><init>(Ljava/lang/String;)V
.line 19
.local v1, "intent":Landroid/content/Intent;
new-instance v2, Landroid/content/ComponentName;
const-string v3, "areeb.xposed.eggster"
const-string v4, "areeb.xposed.eggster.lp.PlatLogoActivity"
invoke-direct {v2, v3, v4}, Landroid/content/ComponentName;-><init>(Ljava/lang/String;Ljava/lang/String;)V
invoke-virtual {v1, v2}, Landroid/content/Intent;->setComponent(Landroid/content/ComponentName;)Landroid/content/Intent;
.line 23
:try_start_0
invoke-virtual {p0, v1}, Lcom/android/internal/app/PlatLogoActivity;->startActivity(Landroid/content/Intent;)V
:try_end_0
.catch Landroid/content/ActivityNotFoundException; {:try_start_0 .. :try_end_0} :catch_0
.line 39
:goto_0
invoke-virtual {p0}, Lcom/android/internal/app/PlatLogoActivity;->finish()V
.line 41
return-void
.line 31
:catch_0
move-exception v0
.line 35
.local v0, "e":Landroid/content/ActivityNotFoundException;
const-string v2, "First install that app Chetan told you to!"
const/4 v3, 0x0
invoke-static {p0, v2, v3}, Landroid/widget/Toast;->makeText(Landroid/content/Context;Ljava/lang/CharSequence;I)Landroid/widget/Toast;
move-result-object v2
invoke-virtual {v2}, Landroid/widget/Toast;->show()V
goto :goto_0
.end method
[*]Save The XML
[*]Recompile The Framework
[*]Now Download The 2 APK's From Attachments And Install Them Before Pushing The Framework
[*]Push The framework.jar To Device
[*]ENJOY!!
AND THE MOST IMPORTANT THING..............HIT THANKS IF YOU LIKE M WORK!!
i can't see any code
+1
WAIT
AuliaYF said:
i can't see any code
Click to expand...
Click to collapse
I am making the thread now bro......wait
AuliaYF said:
i can't see any code
Click to expand...
Click to collapse
Added It!!HIT THANKS IF I HELPED U!!
Hi guys,
Today I'm going to share a method with which you can add apps shortcuts to your SystemUI, well it's called Onclick method and it's not mine it's sir @SpaceCaker's and as I got he's permission to make a separate guide on it I'm posting this, I said separate because this guide is already there on he's 4.2.2 status bar guide but I thought a separate guide would be more helpful for some people so I'm posting this with permission so let's begin
Requirements:
Brain
Patience
Experience
Apktool or anything like it
How to:
1. Decompile your SystemUI.apk
2. Go to smali/com/android/systemui/SystemUIService.smali
3. Now add this:
Code:
.method public settings(Landroid/view/
View;)V
.locals 5
.parameter "view"
.prologue
.line 99
.line 100
:try_start_0
new-instance v1, Landroid/content/Intent;
invoke-direct {v1}, Landroid/content/Intent;-
><init>()V
.line 102
.local v1, intent:Landroid/content/Intent;
const-string v2, "android.intent.action.MAIN"
invoke-virtual {v1, v2}, Landroid/content/
Intent;->setAction(Ljava/lang/String;)Landroid/
content/Intent;
.line 105
const/high16 v2, 0x1000
invoke-virtual {v1, v2}, Landroid/content/
Intent;->setFlags(I)Landroid/content/Intent;
.line 107
const-string v2, "com.android.settings"
const-string v3,
"com.android.settings.Settings"
invoke-virtual {v1, v2, v3}, Landroid/content/
Intent;->setClassName(Ljava/lang/String;Ljava/
lang/String;)Landroid/content/Intent;
invoke-virtual {p0, v1}, Lcom/android/systemui/
SystemUIService;->startActivity(Landroid/
content/Intent;)V
:try_end_0
.catch Ljava/lang/Exception; {:try_start_
0 .. :try_end_0} :catch_0
.line 109
.line 112
.end local v1 #intent:Landroid/content/
Intent;
:goto_0
return-void
.line 115
:catch_0
move-exception v0
.line 117
.local v0, e:Ljava/lang/Exception;
invoke-virtual {v0}, Ljava/lang/Exception;-
>printStackTrace()V
goto :goto_0
.end method
4. Now you can edit 3 things in it and they are:
1. The Onclick title: "settings" above here or in easy words the one below between "****"
Code:
.method public "anything"(Landroid/view/View;)V
2. The package: const-string v2, "anything"
3. The activity: const-string v3, "anything"
4. So now you need to edit these 3 things to whatever you want, give your Onclick a title, change the package and than the activity, do note you have to edit both and you can add any shortcut with this but if you're adding user installed apps shortcuts than make sure you have the app installed
5. Now add this to res/layout/"wherever you want "
Code:
android:onClick="anything"
This is what adds the onclick method to something
6. Now recompile your SystemUI.apk, sign, push, reboot and enjoy a shortcut which will save some valuable time of yours
Credits:
@SpaceCaker
Use this app to get the activities:
https://play.google.com/store/apps/details?id=de.szalkowski.activitylauncher&hl=en
If your browser has problems with coping the code from the first post download this and copy:
https://www.androidfilehost.com/?fid=673368273298942983
Screenshot:
Hello guys this time i wana share you how to port blur effect to your expanded&recent, it has option to switch on or off the blur just like xposed module do but this time we do it via smali huge thanks to @serajr for source&tips fix also to @psidco as builder&thinker
If you not familiar with smali or dcrc your system app i suggest you dig about that before doing this guide/mod
ALWAYS BACKUP BEFORE YOU MODIFY YOUR ROM
I don.t take any responsibility for any damage that may occur while you doing this, you are free no force to do this
GUIDE Expanded Blur With Realtime Change Effect
This Blur Was Already Tested On
Samsung S3 Cm13 Pure By Me Via Smali
Samsung Note2 Cm13 Pure Build From Source
And Many Os&Device On Maaadr Group Fb
Salute&Credit For
Dedy Prayetno/psidco Creator&Builder Of The Mod
Serajr For The Source&Fix Tips Of Headsup Blur And Blank Lockscreen
Maaadr (Mediatek Android Art&Dev Reborn )
You
RESPECT OUR JOB&HARDWORK GIVE PROPER CREDIT IF YOU WANT TO USE ON YOUR ROM OR MOD
WE DIDN.T ASK FOR NOTHING ONLY PROPER CREDIT FOR OUR COUNTLESS TIME DURING BUILD THIS MOD
YOU HAD NO IDEA HOW MUCH TIME&HEADACHE WE FEEL FOR THIS MOD
OKE SKIP BLA BLA BLA LETS START
OPEN notifpanelview smali
PASTE THIS LINE
Code:
# static fields
[COLOR="Blue"]
.field public static kontek:Landroid/content/Context;
.field private static mBlurRadius:I
.field private static mBlurScale:I
.field private static mBlurredStatusBarExpandedEnabled:Z
.field private static mBlurredView:Landroid/widget/FrameLayout;
.field private static mColorFilter:Landroid/graphics/ColorFilter;
.field public static mDimen:[I
.field private static final mDummyDirtyRect:Landroid/graphics/Rect;
.field private static mKeyguardShowing:Z
.field public static tmp:Landroid/graphics/Bitmap;[/COLOR]
Delete Field Keyguardshowing That Already Exist On Your Smali That.S Not Needeed Anymore
Paste This Line At The End Of Your Method Static Synthetic Accsess
Code:
[COLOR="Blue"]
.method static synthetic access$L1000028()I
.locals 1
sget v0, Lcom/android/systemui/statusbar/phone/NotificationPanelView;->mBlurScale:I
return v0
.end method
.method static synthetic access$L1000029()I
.locals 1
sget v0, Lcom/android/systemui/statusbar/phone/NotificationPanelView;->mBlurRadius:I
return v0
.end method
.method static synthetic access$L1000030()Z
.locals 1
sget-boolean v0, Lcom/android/systemui/statusbar/phone/NotificationPanelView;->mBlurredStatusBarExpandedEnabled:Z
return v0
.end method
.method static synthetic access$S1000028(I)V
.locals 0
sput p0, Lcom/android/systemui/statusbar/phone/NotificationPanelView;->mBlurScale:I
return-void
.end method
.method static synthetic access$S1000029(I)V
.locals 0
sput p0, Lcom/android/systemui/statusbar/phone/NotificationPanelView;->mBlurRadius:I
return-void
.end method
.method static synthetic access$S1000030(Z)V
.locals 0
sput-boolean p0, Lcom/android/systemui/statusbar/phone/NotificationPanelView;->mBlurredStatusBarExpandedEnabled:Z
return-void
.end method[/COLOR]
Above Method .method private calculatePanelHeightQsExpanded()I
Code:
[COLOR="Blue"]
.method public static apdet()V
.locals 6
.annotation system Ldalvik/annotation/Signature;
value = {
"()V"
}
.end annotation
.prologue
const/4 v1, 0x4
const/4 v5, 0x0
.line 564
invoke-static {}, Lcom/android/systemui/statusbar/phone/NotificationPanelView;->apdetBlur()V
.line 566
invoke-static {}, Lcom/android/systemui/statusbar/phone/NotificationPanelView;->isKeyguard()Z
move-result v0
if-eqz v0, :cond_0
.line 567
sget-object v0, Lcom/android/systemui/statusbar/phone/NotificationPanelView;->mBlurredView:Landroid/widget/FrameLayout;
invoke-virtual {v0, v1}, Landroid/widget/FrameLayout;->setVisibility(I)V
.line 588
:goto_0
return-void
.line 571
:cond_0
invoke-static {}, Lcom/android/systemui/statusbar/phone/NotificationPanelView;->ena()Z
move-result v0
if-eqz v0, :cond_1
.line 572
invoke-static {}, Lcom/android/systemui/statusbar/phone/NotificationPanelView;->getTemp()Landroid/graphics/Bitmap;
move-result-object v0
.line 573
invoke-static {}, Lcom/android/systemui/statusbar/phone/NotificationPanelView;->getDimens()[I
move-result-object v1
.line 574
invoke-static {}, Lcom/android/systemui/statusbar/phone/NotificationPanelView;->getScala()I
move-result v2
.line 575
aget v3, v1, v5
div-int/2addr v3, v2
.line 576
const/4 v4, 0x1
aget v4, v1, v4
div-int v2, v4, v2
.line 578
invoke-static {v0, v3, v2, v5}, Landroid/graphics/Bitmap;->createScaledBitmap(Landroid/graphics/Bitmap;IIZ)Landroid/graphics/Bitmap;
move-result-object v0
.line 579
invoke-static {}, Lcom/android/systemui/statusbar/phone/NotificationPanelView;->getRadius()I
move-result v2
invoke-static {v0, v2}, Lcom/android/systemui/statusbar/phone/NotificationPanelView;->blurBitmap(Landroid/graphics/Bitmap;I)Landroid/graphics/Bitmap;
move-result-object v0
.line 580
sget-object v2, Lcom/android/systemui/statusbar/phone/NotificationPanelView;->mBlurredView:Landroid/widget/FrameLayout;
invoke-virtual {v2}, Landroid/widget/FrameLayout;->getLayoutParams()Landroid/view/ViewGroup$LayoutParams;
move-result-object v2
aget v1, v1, v5
iput v1, v2, Landroid/view/ViewGroup$LayoutParams;->width:I
.line 581
sget-object v1, Lcom/android/systemui/statusbar/phone/NotificationPanelView;->mBlurredView:Landroid/widget/FrameLayout;
invoke-virtual {v1}, Landroid/widget/FrameLayout;->requestLayout()V
.line 582
new-instance v1, Landroid/graphics/drawable/BitmapDrawable;
invoke-direct {v1, v0}, Landroid/graphics/drawable/BitmapDrawable;-><init>(Landroid/graphics/Bitmap;)V
.line 583
new-instance v0, Landroid/graphics/PorterDuffColorFilter;
const v2, -0xbbbbbc
sget-object v3, Landroid/graphics/PorterDuff$Mode;->MULTIPLY:Landroid/graphics/PorterDuff$Mode;
invoke-direct {v0, v2, v3}, Landroid/graphics/PorterDuffColorFilter;-><init>(ILandroid/graphics/PorterDuff$Mode;)V
invoke-virtual {v1, v0}, Landroid/graphics/drawable/BitmapDrawable;->setColorFilter(Landroid/graphics/ColorFilter;)V
.line 584
sget-object v0, Lcom/android/systemui/statusbar/phone/NotificationPanelView;->mBlurredView:Landroid/widget/FrameLayout;
invoke-virtual {v0, v1}, Landroid/widget/FrameLayout;->setBackground(Landroid/graphics/drawable/Drawable;)V
.line 585
sget-object v0, Lcom/android/systemui/statusbar/phone/NotificationPanelView;->mBlurredView:Landroid/widget/FrameLayout;
invoke-virtual {v0, v5}, Landroid/widget/FrameLayout;->setVisibility(I)V
goto :goto_0
.line 588
:cond_1
sget-object v0, Lcom/android/systemui/statusbar/phone/NotificationPanelView;->mBlurredView:Landroid/widget/FrameLayout;
invoke-virtual {v0, v1}, Landroid/widget/FrameLayout;->setVisibility(I)V
goto :goto_0
.end method
.method public static apdetBlur()V
.locals 4
.annotation system Ldalvik/annotation/Signature;
value = {
"()V"
}
.end annotation
.prologue
const/4 v3, 0x3
const/4 v0, 0x1
.line 553
sget-object v1, Lcom/android/systemui/statusbar/phone/NotificationPanelView;->kontek:Landroid/content/Context;
invoke-virtual {v1}, Landroid/content/Context;->getContentResolver()Landroid/content/ContentResolver;
move-result-object v1
.line 555
const-string v2, "BLUR_SCALA"
invoke-static {v1, v2, v3}, Landroid/provider/Settings$System;->getInt(Landroid/content/ContentResolver;Ljava/lang/String;I)I
move-result v2
sput v2, Lcom/android/systemui/statusbar/phone/NotificationPanelView;->mBlurScale:I
.line 557
const-string v2, "BLUR_RADIUS"
invoke-static {v1, v2, v3}, Landroid/provider/Settings$System;->getInt(Landroid/content/ContentResolver;Ljava/lang/String;I)I
move-result v2
sput v2, Lcom/android/systemui/statusbar/phone/NotificationPanelView;->mBlurRadius:I
.line 559
const-string v2, "BLUR"
invoke-static {v1, v2, v0}, Landroid/provider/Settings$System;->getInt(Landroid/content/ContentResolver;Ljava/lang/String;I)I
move-result v1
if-eq v1, v0, :cond_0
const/4 v0, 0x0
:cond_0
sput-boolean v0, Lcom/android/systemui/statusbar/phone/NotificationPanelView;->mBlurredStatusBarExpandedEnabled:Z
return-void
.end method
.method public static blurBitmap(Landroid/graphics/Bitmap;I)Landroid/graphics/Bitmap;
.locals 4
.prologue
.line 585
sget-object v0, Lcom/android/systemui/statusbar/phone/NotificationPanelView;->kontek:Landroid/content/Context;
invoke-static {v0}, Landroid/renderscript/RenderScript;->create(Landroid/content/Context;)Landroid/renderscript/RenderScript;
move-result-object v0
.line 586
invoke-static {v0}, Landroid/renderscript/Element;->U8_4(Landroid/renderscript/RenderScript;)Landroid/renderscript/Element;
move-result-object v1
invoke-static {v0, v1}, Landroid/renderscript/ScriptIntrinsicBlur;->create(Landroid/renderscript/RenderScript;Landroid/renderscript/Element;)Landroid/renderscript/ScriptIntrinsicBlur;
move-result-object v1
.line 587
invoke-static {v0, p0}, Landroid/renderscript/Allocation;->createFromBitmap(Landroid/renderscript/RenderScript;Landroid/graphics/Bitmap;)Landroid/renderscript/Allocation;
move-result-object v2
.line 588
invoke-virtual {v2}, Landroid/renderscript/Allocation;->getType()Landroid/rcript/Type;
ove-result-objectSS v3
invoke-static {v0, v3}, Landroid/renderscript/Allocation;->createTyped(Landroid/renderscript/RenderScript;Landroid/renderscript/Type;)Landroid/renderscript/Allocation;
move-result-object v0
.line 589
int-to-float v3, p1
invoke-virtual {v1, v3}, Landroid/renderscript/ScriptIntrinsicBlur;->setRadius(F)V
.line 590
invoke-virtual {v1, v2}, Landroid/renderscript/ScriptIntrinsicBlur;->setInput(Landroid/renderscript/Allocation;)V
.line 591
invoke-virtual {v1, v0}, Landroid/renderscript/ScriptIntrinsicBlur;->forEach(Landroid/renderscript/Allocation;)V
.line 592
invoke-virtual {v0, p0}, Landroid/renderscript/Allocation;->copyTo(Landroid/graphics/Bitmap;)V
.line 593
return-object p0
.end method[/COLOR]
Above Method .method private flingExpandsQs(F)Z
Code:
[COLOR="Blue"]
.method public static ena()Z
.locals 1
.prologue
.line 539
sget-boolean v0, Lcom/android/systemui/statusbar/phone/NotificationPanelView;->mBlurredStatusBarExpandedEnabled:Z
return v0
.end method[/COLOR]
Above Method .method private getFadeoutAlpha()F
Code:
[COLOR="Blue"]
.method public static getDimens()[I
.locals 1
.prologue
.line 549
sget-object v0, Lcom/android/systemui/statusbar/phone/NotificationPanelView;->mDimen:[I
return-object v0
.end method[/COLOR]
Above Method .method private getScrollViewScrollY()I
Code:
[COLOR="Blue"].method public static getRadius()I
.locals 1
.prologue
.line 545
sget v0, Lcom/android/systemui/statusbar/phone/NotificationPanelView;->mBlurRadius:I
return v0
.end method
.method public static getScala()I
.locals 1
.prologue
.line 542
sget v0, Lcom/android/systemui/statusbar/phone/NotificationPanelView;->mBlurScale:I
return v0
.end method[/COLOR]
Above Method .method private getTempQsMaxExpansion()I
Code:
[COLOR="Blue"]
.method public static getTemp()Landroid/graphics/Bitmap;
.locals 1
.prologue
.line 533
sget-object v0, Lcom/android/systemui/statusbar/phone/NotificationPanelView;->tmp:Landroid/graphics/Bitmap;
return-object v0
.end method[/COLOR]
Below Method .method private isInSettings()Z
Code:
[COLOR="Blue"]
.method public static isKeyguard()Z
.locals 1
.prologue
.line 537
sget-boolean v0, Lcom/android/systemui/statusbar/phone/NotificationPanelView;->mKeyguardShowing:Z
return v0
.end method[/COLOR]
Above Method .method private requestScrollerTopPaddingUpdate(Z)V
Code:
[COLOR="Blue"]
.method public static recycle()V
.locals 2
.annotation system Ldalvik/annotation/Signature;
value = {
"()V"
}
.end annotation
.prologue
const/4 v1, 0x0
.line 613
sget-object v0, Lcom/android/systemui/statusbar/phone/NotificationPanelView;->mBlurredView:Landroid/widget/FrameLayout;
if-eqz v0, :cond_1
sget-object v0, Lcom/android/systemui/statusbar/phone/NotificationPanelView;->mBlurredView:Landroid/widget/FrameLayout;
invoke-virtual {v0}, Landroid/widget/FrameLayout;->getBackground()Landroid/graphics/drawable/Drawable;
move-result-object v0
if-eqz v0, :cond_1
.line 615
sget-object v0, Lcom/android/systemui/statusbar/phone/NotificationPanelView;->mBlurredView:Landroid/widget/FrameLayout;
invoke-virtual {v0}, Landroid/widget/FrameLayout;->getBackground()Landroid/graphics/drawable/Drawable;
move-result-object v0
instance-of v0, v0, Landroid/graphics/drawable/BitmapDrawable;
if-eqz v0, :cond_0
.line 616
sget-object v0, Lcom/android/systemui/statusbar/phone/NotificationPanelView;->mBlurredView:Landroid/widget/FrameLayout;
invoke-virtual {v0}, Landroid/widget/FrameLayout;->getBackground()Landroid/graphics/drawable/Drawable;
move-result-object v0
check-cast v0, Landroid/graphics/drawable/BitmapDrawable;
invoke-virtual {v0}, Landroid/graphics/drawable/BitmapDrawable;->getBitmap()Landroid/graphics/Bitmap;
move-result-object v0
.line 617
if-eqz v0, :cond_0
.line 618
invoke-virtual {v0}, Landroid/graphics/Bitmap;->recycle()V
move-object v0, v1
.line 619
check-cast v0, Landroid/graphics/Bitmap;
.line 623
:cond_0
sget-object v0, Lcom/android/systemui/statusbar/phone/NotificationPanelView;->mBlurredView:Landroid/widget/FrameLayout;
check-cast v1, Landroid/graphics/drawable/Drawable;
invoke-virtual {v0, v1}, Landroid/widget/FrameLayout;->setBackground(Landroid/graphics/drawable/Drawable;)V
.line 625
:cond_1
sget-object v0, Lcom/android/systemui/statusbar/phone/NotificationPanelView;->mBlurredView:Landroid/widget/FrameLayout;
const/4 v1, 0x4
invoke-virtual {v0, v1}, Landroid/widget/FrameLayout;->setVisibility(I)V
return-void
.end method[/COLOR]
Below Method .method private shouldQuickSettingsIntercept(FFF)Z
Code:
[COLOR="Blue"]
.method public static startBlurTask()V
.locals 2
.annotation system Ldalvik/annotation/Signature;
value = {
"()V"
}
.end annotation
.prologue
.line 610
sget-object v0, Lcom/android/systemui/statusbar/phone/NotificationPanelView;->kontek:Landroid/content/Context;
invoke-static {v0}, Lcom/android/systemui/statusbar/phone/BlurAnu;->ss(Landroid/content/Context;)Landroid/graphics/Bitmap;
move-result-object v0
.line 611
sput-object v0, Lcom/android/systemui/statusbar/phone/NotificationPanelView;->tmp:Landroid/graphics/Bitmap;
.line 612
sget-object v0, Lcom/android/systemui/statusbar/phone/NotificationPanelView;->kontek:Landroid/content/Context;
invoke-static {v0}, Lcom/android/systemui/statusbar/phone/BlurAnu;->ukuranLayar(Landroid/content/Context;)[I
move-result-object v0
sput-object v0, Lcom/android/systemui/statusbar/phone/NotificationPanelView;->mDimen:[I
.line 614
invoke-static {}, Lcom/android/systemui/statusbar/phone/NotificationPanelView;->isKeyguard()Z
move-result v0
if-eqz v0, :cond_0
.line 615
sget-object v0, Lcom/android/systemui/statusbar/phone/NotificationPanelView;->mBlurredView:Landroid/widget/FrameLayout;
const/4 v1, 0x4
invoke-virtual {v0, v1}, Landroid/widget/FrameLayout;->setVisibility(I)V
.line 620
:goto_0
return-void
.line 619
:cond_0
invoke-static {}, Lcom/android/systemui/statusbar/phone/NotificationPanelView;->apdetBlur()V
.line 620
invoke-static {}, Lcom/android/systemui/statusbar/phone/NotificationPanelView;->apdet()V
goto :goto_0
.end method[/COLOR]
Below Method .method protected isTrackingBlocked()Z
Code:
[COLOR="Blue"]
.method public jancuk()V
.locals 4
.annotation system Ldalvik/annotation/Signature;
value = {
"()V"
}
.end annotation
.prologue
const/4 v3, 0x0
const/4 v2, -0x1
.line 519
invoke-virtual {p0}, Lcom/android/systemui/statusbar/phone/NotificationPanelView;->getContext()Landroid/content/Context;
move-result-object v0
sput-object v0, Lcom/android/systemui/statusbar/phone/NotificationPanelView;->kontek:Landroid/content/Context;
.line 525
new-instance v0, Landroid/widget/FrameLayout;
iget-object v1, p0, Landroid/view/View;->mContext:Landroid/content/Context;
invoke-direct {v0, v1}, Landroid/widget/FrameLayout;-><init>(Landroid/content/Context;)V
sput-object v0, Lcom/android/systemui/statusbar/phone/NotificationPanelView;->mBlurredView:Landroid/widget/FrameLayout;
.line 526
sget-object v0, Lcom/android/systemui/statusbar/phone/NotificationPanelView;->mBlurredView:Landroid/widget/FrameLayout;
new-instance v1, Landroid/widget/FrameLayout$LayoutParams;
invoke-direct {v1, v2, v2}, Landroid/widget/FrameLayout$LayoutParams;-><init>(II)V
invoke-virtual {p0, v0, v3, v1}, Lcom/android/systemui/statusbar/phone/NotificationPanelView;->addView(Landroid/view/View;ILandroid/view/ViewGroup$LayoutParams;)V
.line 528
invoke-virtual {p0}, Lcom/android/systemui/statusbar/phone/NotificationPanelView;->requestLayout()V
.line 530
sget-object v0, Lcom/android/systemui/statusbar/phone/NotificationPanelView;->mBlurredView:Landroid/widget/FrameLayout;
invoke-virtual {v0, v3}, Landroid/widget/FrameLayout;->setVisibility(I)V
return-void
.end method[/COLOR]
On Method Protected Onfinish Inflate Add
Code:
[COLOR="Blue"]
.line 437
invoke-virtual {p0}, Lcom/android/systemui/statusbar/phone/NotificationPanelView;->jancuk()V[/COLOR]
Looks Like This Below
Code:
[COLOR="Blue"]
check-cast v0, Lcom/android/systemui/qs/QSDragPanel;
iput-object v0, p0, Lcom/android/systemui/statusbar/phone/NotificationPanelView;->mQsPanel:Lcom/android/systemui/qs/QSDragPanel;
.line 437
invoke-virtual {p0}, Lcom/android/systemui/statusbar/phone/NotificationPanelView;->jancuk()V
[/COLOR]
NEXT
PhoneStatusBar.smali
On Method .method private updateKeyguardState(ZZ)V
Code:
[COLOR="Blue"]
.line 4570
:goto_1
invoke-static {}, Lcom/android/systemui/statusbar/phone/NotificationPanelView;->recycle()V[/COLOR]
Looks Like Below
Code:
[COLOR="Blue"].line 4565
iget-object v1, p0, Lcom/android/systemui/statusbar/phone/PhoneStatusBar;->mIconPolicy:Lcom/android/systemui/statusbar/phone/PhoneStatusBarPolicy;
invoke-virtual {v1, v0}, Lcom/android/systemui/statusbar/phone/PhoneStatusBarPolicy;->setKeyguardShowing(Z)V
.line 4570
:goto_1
invoke-static {}, Lcom/android/systemui/statusbar/phone/NotificationPanelView;->recycle()V
iget-object v0, p0, Lcom/android/systemui/statusbar/phone/PhoneStatusBar;->mNotificationPanel:Lcom/android/systemui/statusbar/phone/NotificationPanelView;
iget v1, p0, Lcom/android/systemui/statusbar/phone/PhoneStatusBar;->mState:I[/COLOR]
On Method .method makeExpandedInvisible()V
Add
Code:
[COLOR="Blue"].line 2786
:cond_1
invoke-static {}, Lcom/android/systemui/statusbar/phone/NotificationPanelView;->recycle()V[/COLOR]
Looks like below
Code:
[COLOR="Blue"].line 2781
iget-boolean v0, p0, Lcom/android/systemui/statusbar/phone/PhoneStatusBar;->mExpandedVisible:Z
if-eqz v0, :cond_0
iget-object v0, p0, Lcom/android/systemui/statusbar/phone/PhoneStatusBar;->mStatusBarWindow:Lcom/android/systemui/statusbar/phone/StatusBarWindowView;
if-nez v0, :cond_1
.line 2782
:cond_0
return-void
.line 2786
:cond_1
invoke-static {}, Lcom/android/systemui/statusbar/phone/NotificationPanelView;->recycle()V[/COLOR]
On Method .method makeExpandedVisible(Z)V
Add
Code:
[COLOR="Blue"]
.line 2673
invoke-static {}, Lcom/android/systemui/statusbar/phone/NotificationPanelView;->startBlurTask()V/[/COLOR]
Looks Like Below
Code:
[COLOR="Blue"].line 2672
invoke-virtual {p0, v1, v1}, Lcom/android/systemui/statusbar/phone/PhoneStatusBar;->setInteracting(IZ)V
.line 2673
invoke-static {}, Lcom/android/systemui/statusbar/phone/NotificationPanelView;->startBlurTask()V
.line 2655
return-void
.line 2658
:cond_2
return-void
:cond_3
move v0, v1
.line 2671
goto :goto_0
.end method[/COLOR]
NEXT
NOTE!!!!!!!!!!!!
You Must Change Default Instance Inside Your Smali
Example
BEFORE
Code:
[COLOR="Blue"]iget-boolean v3, p0,Lcom/android/systemui/statusbar/phone/NotificationPanelView;->mKeyguardShowing:Z[/COLOR]
AFTER
Code:
[COLOR="Blue"]sget-boolean v3, Lcom/android/systemui/statusbar/phone/NotificationPanelView;->mKeyguardShowing:Z[/COLOR]
Do That On Every Line Inside Your Notifpanel Smali That Have End Line Like This "mkeyguardshowing;Z"
On My Smali I Had To Change About 15 Until 20 Line So Check Carefully Yours
If You Forgot 1 Line It Will Fc
The Point Is To Change From Instance To Be Static Field
Continue to part2
PART 2 BLUR RECENT
OPEN Recentactivity.smali
Paste Line Below
Code:
# static fields
[COLOR="Blue"]
.field public static kontek:Landroid/content/Context;
.field private static mBlurRadius:I
.field private static mBlurScale:I
.field private static mBlurredRecentAppsEnabled:Z
.field private static mColorFilter:Landroid/graphics/ColorFilter;
.field private static mRecentsActivityRootView:Landroid/widget/FrameLayout;
.field static mRecentsView:Lcom/android/systemui/recents/views/RecentsView;[/COLOR]
Delete Field Default That Already Exist On Your Smali
Code:
[COLOR="Red"].field mRecentsView:Lcom/android/systemui/recents/views/RecentsView[/COLOR]
NEXT
Above
.method private getResizeTaskDebugDialog()Lcom/android/systemui/recents/RecentsResizeTaskDialog;
Paste Line Below
Code:
[COLOR="Blue"].method public static apdetBlur()V
.locals 4
.annotation system Ldalvik/annotation/Signature;
value = {
"()V"
}
.end annotation
.prologue
const/4 v3, 0x3
const/4 v0, 0x1
.line 489
sget-object v1, Lcom/android/systemui/recents/RecentsActivity;->kontek:Landroid/content/Context;
invoke-virtual {v1}, Landroid/content/Context;->getContentResolver()Landroid/content/ContentResolver;
move-result-object v1
.line 491
const-string v2, "BLUR_SCALA"
invoke-static {v1, v2, v3}, Landroid/provider/Settings$System;->getInt(Landroid/content/ContentResolver;Ljava/lang/String;I)I
move-result v2
sput v2, Lcom/android/systemui/recents/RecentsActivity;->mBlurScale:I
.line 493
const-string v2, "BLUR_RADIUS"
invoke-static {v1, v2, v3}, Landroid/provider/Settings$System;->getInt(Landroid/content/ContentResolver;Ljava/lang/String;I)I
move-result v2
sput v2, Lcom/android/systemui/recents/RecentsActivity;->mBlurRadius:I
.line 495
const-string v2, "BLUR_RECENT"
invoke-static {v1, v2, v0}, Landroid/provider/Settings$System;->getInt(Landroid/content/ContentResolver;Ljava/lang/String;I)I
move-result v1
if-eq v1, v0, :cond_0
const/4 v0, 0x0
:cond_0
sput-boolean v0, Lcom/android/systemui/recents/RecentsActivity;->mBlurredRecentAppsEnabled:Z
return-void
.end method
.method public static blur()Landroid/graphics/Bitmap;
.locals 6
.prologue
const/4 v5, 0x0
.line 411
sget-object v0, Lcom/android/systemui/recents/RecentsActivity;->kontek:Landroid/content/Context;
invoke-static {v0}, Lcom/android/systemui/statusbar/phone/BlurAnu;->ss(Landroid/content/Context;)Landroid/graphics/Bitmap;
move-result-object v0
.line 412
invoke-static {}, Lcom/android/systemui/recents/RecentsActivity;->getDimens()[I
move-result-object v1
.line 413
invoke-static {}, Lcom/android/systemui/recents/RecentsActivity;->getScala()I
move-result v2
.line 414
aget v3, v1, v5
div-int/2addr v3, v2
.line 415
const/4 v4, 0x1
aget v1, v1, v4
div-int/2addr v1, v2
.line 417
invoke-static {v0, v3, v1, v5}, Landroid/graphics/Bitmap;->createScaledBitmap(Landroid/graphics/Bitmap;IIZ)Landroid/graphics/Bitmap;
move-result-object v0
.line 418
invoke-static {}, Lcom/android/systemui/recents/RecentsActivity;->getRadius()I
move-result v1
invoke-static {v0, v1}, Lcom/android/systemui/recents/RecentsActivity;->blurBitmap(Landroid/graphics/Bitmap;I)Landroid/graphics/Bitmap;
move-result-object v0
.line 419
return-object v0
.end method
.method public static blurBitmap(Landroid/graphics/Bitmap;I)Landroid/graphics/Bitmap;
.locals 4
.prologue
.line 500
sget-object v0, Lcom/android/systemui/recents/RecentsActivity;->kontek:Landroid/content/Context;
invoke-static {v0}, Landroid/renderscript/RenderScript;->create(Landroid/content/Context;)Landroid/renderscript/RenderScript;
move-result-object v0
.line 501
invoke-static {v0}, Landroid/renderscript/Element;->U8_4(Landroid/renderscript/RenderScript;)Landroid/renderscript/Element;
move-result-object v1
invoke-static {v0, v1}, Landroid/renderscript/ScriptIntrinsicBlur;->create(Landroid/renderscript/RenderScript;Landroid/renderscript/Element;)Landroid/renderscript/ScriptIntrinsicBlur;
move-result-object v1
.line 502
invoke-static {v0, p0}, Landroid/renderscript/Allocation;->createFromBitmap(Landroid/renderscript/RenderScript;Landroid/graphics/Bitmap;)Landroid/renderscript/Allocation;
move-result-object v2
.line 503
invoke-virtual {v2}, Landroid/renderscript/Allocation;->getType()Landroid/renderscript/Type;
move-result-object v3
invoke-static {v0, v3}, Landroid/renderscript/Allocation;->createTyped(Landroid/renderscript/RenderScript;Landroid/renderscript/Type;)Landroid/renderscript/Allocation;
move-result-object v0
.line 504
int-to-float v3, p1
invoke-virtual {v1, v3}, Landroid/renderscript/ScriptIntrinsicBlur;->setRadius(F)V
.line 505
invoke-virtual {v1, v2}, Landroid/renderscript/ScriptIntrinsicBlur;->setInput(Landroid/renderscript/Allocation;)V
.line 506
invoke-virtual {v1, v0}, Landroid/renderscript/ScriptIntrinsicBlur;->forEach(Landroid/renderscript/Allocation;)V
.line 507
invoke-virtual {v0, p0}, Landroid/renderscript/Allocation;->copyTo(Landroid/graphics/Bitmap;)V
.line 508
return-object p0
.end method
.method public static ena()Z
.locals 1
.prologue
.line 475
sget-boolean v0, Lcom/android/systemui/recents/RecentsActivity;->mBlurredRecentAppsEnabled:Z
return v0
.end method
.method public static getDimens()[I
.locals 1
.prologue
.line 484
sget-object v0, Lcom/android/systemui/recents/RecentsActivity;->kontek:Landroid/content/Context;
invoke-static {v0}, Lcom/android/systemui/statusbar/phone/BlurAnu;->ukuranLayar(Landroid/content/Context;)[I
move-result-object v0
.line 485
return-object v0
.end method
.method public static getRadius()I
.locals 1
.prologue
.line 481
sget v0, Lcom/android/systemui/recents/RecentsActivity;->mBlurRadius:I
return v0
.end method[/COLOR]
Above This Method Paste
# virtual methods
.method dismissRecentsToFocusedTaskOrHome(Z)Z
Code:
[COLOR="Blue"].method public static getScala()I
.locals 1
.prologue
.line 478
sget v0, Lcom/android/systemui/recents/RecentsActivity;->mBlurScale:I
return v0
.end method
.method public static jancuk()V
.locals 1
.annotation system Ldalvik/annotation/Signature;
value = {
"()V"
}
.end annotation
.prologue
.line 422
sget-object v0, Lcom/android/systemui/recents/RecentsActivity;->mRecentsView:Lcom/android/systemui/recents/views/RecentsView;
invoke-virtual {v0}, Lcom/android/systemui/recents/views/RecentsView;->getContext()Landroid/content/Context;
move-result-object v0
sput-object v0, Lcom/android/systemui/recents/RecentsActivity;->kontek:Landroid/content/Context;
.line 423
invoke-static {}, Lcom/android/systemui/recents/RecentsActivity;->apdetBlur()V
.line 424
sget-object v0, Lcom/android/systemui/recents/RecentsActivity;->mRecentsView:Lcom/android/systemui/recents/views/RecentsView;
invoke-virtual {v0}, Lcom/android/systemui/recents/views/RecentsView;->getParent()Landroid/view/ViewParent;
move-result-object v0
check-cast v0, Landroid/widget/FrameLayout;
sput-object v0, Lcom/android/systemui/recents/RecentsActivity;->mRecentsActivityRootView:Landroid/widget/FrameLayout;
.line 425
invoke-static {}, Lcom/android/systemui/recents/RecentsActivity;->jret()V
return-void
.end method
.method public static jret()V
.locals 2
.annotation system Ldalvik/annotation/Signature;
value = {
"()V"
}
.end annotation
.prologue
.line 435
sget-object v0, Lcom/android/systemui/recents/RecentsActivity;->mRecentsActivityRootView:Landroid/widget/FrameLayout;
if-eqz v0, :cond_0
.line 436
sget-object v1, Lcom/android/systemui/recents/RecentsActivity;->mRecentsActivityRootView:Landroid/widget/FrameLayout;
const/4 v0, 0x0
check-cast v0, Landroid/graphics/drawable/Drawable;
invoke-virtual {v1, v0}, Landroid/widget/FrameLayout;->setBackground(Landroid/graphics/drawable/Drawable;)V
.line 439
:cond_0
sget-boolean v0, Lcom/android/systemui/recents/RecentsActivity;->mBlurredRecentAppsEnabled:Z
if-nez v0, :cond_2
.line 450
:cond_1
:goto_0
return-void
.line 442
:cond_2
invoke-static {}, Lcom/android/systemui/recents/RecentsActivity;->blur()Landroid/graphics/Bitmap;
move-result-object v0
.line 443
invoke-static {}, Lcom/android/systemui/recents/RecentsActivity;->ena()Z
move-result v1
if-eqz v1, :cond_1
if-eqz v0, :cond_1
.line 446
new-instance v1, Landroid/graphics/drawable/BitmapDrawable;
invoke-direct {v1, v0}, Landroid/graphics/drawable/BitmapDrawable;-><init>(Landroid/graphics/Bitmap;)V
.line 447
sget-object v0, Lcom/android/systemui/recents/RecentsActivity;->mColorFilter:Landroid/graphics/ColorFilter;
invoke-virtual {v1, v0}, Landroid/graphics/drawable/BitmapDrawable;->setColorFilter(Landroid/graphics/ColorFilter;)V
.line 450
sget-object v0, Lcom/android/systemui/recents/RecentsActivity;->mRecentsActivityRootView:Landroid/widget/FrameLayout;
invoke-virtual {v0, v1}, Landroid/widget/FrameLayout;->setBackground(Landroid/graphics/drawable/Drawable;)V
goto :goto_0
.end method
.method public static onConfigurationChanged()V
.locals 0
.annotation system Ldalvik/annotation/Signature;
value = {
"()V"
}
.end annotation
.prologue
.line 431
invoke-static {}, Lcom/android/systemui/recents/RecentsActivity;->recycle()V
return-void
.end method
.method private static recycle()V
.locals 2
.annotation system Ldalvik/annotation/Signature;
value = {
"()V"
}
.end annotation
.prologue
const/4 v1, 0x0
.line 455
sget-object v0, Lcom/android/systemui/recents/RecentsActivity;->mRecentsActivityRootView:Landroid/widget/FrameLayout;
if-nez v0, :cond_1
.line 469
:cond_0
:goto_0
return-void
.line 459
:cond_1
sget-object v0, Lcom/android/systemui/recents/RecentsActivity;->mRecentsActivityRootView:Landroid/widget/FrameLayout;
invoke-virtual {v0}, Landroid/widget/FrameLayout;->getBackground()Landroid/graphics/drawable/Drawable;
move-result-object v0
if-eqz v0, :cond_0
.line 462
sget-object v0, Lcom/android/systemui/recents/RecentsActivity;->mRecentsActivityRootView:Landroid/widget/FrameLayout;
invoke-virtual {v0}, Landroid/widget/FrameLayout;->getBackground()Landroid/graphics/drawable/Drawable;
move-result-object v0
check-cast v0, Landroid/graphics/drawable/BitmapDrawable;
invoke-virtual {v0}, Landroid/graphics/drawable/BitmapDrawable;->getBitmap()Landroid/graphics/Bitmap;
move-result-object v0
.line 463
if-eqz v0, :cond_2
.line 465
invoke-virtual {v0}, Landroid/graphics/Bitmap;->recycle()V
move-object v0, v1
.line 466
check-cast v0, Landroid/graphics/Bitmap;
.line 469
:cond_2
sget-object v0, Lcom/android/systemui/recents/RecentsActivity;->mRecentsActivityRootView:Landroid/widget/FrameLayout;
check-cast v1, Landroid/graphics/drawable/Drawable;
invoke-virtual {v0, v1}, Landroid/widget/FrameLayout;->setBackground(Landroid/graphics/drawable/Drawable;)V
goto :goto_0
.end method[/COLOR]
NEXT
On method public onCreate(Landroid/os/BundleV
Code:
[COLOR="Blue"].line 400
invoke-static {}, Lcom/android/systemui/recents/RecentsActivity;->jancuk()V
penampakan /looks like below
.line 372
invoke-virtual {p0}, Lcom/android/systemui/recents/RecentsActivity;->inflateDebugOverlay()V
.line 400
invoke-static {}, Lcom/android/systemui/recents/RecentsActivity;->jancuk()V[/COLOR]
NEXT
BaseStatusbar.smalI
On .method protected toggleRecents()V
Code:
[COLOR="Blue"].line 1165
invoke-static {}, Lcom/android/systemui/recents/RecentsActivity;->jret()V[/COLOR]
penampakan /looks like below
Code:
.method protected toggleRecents()V
.locals 4
.annotation system Ldalvik/annotation/Signature;
value = {
"()V"
}
.end annotation
.prologue
.line 1163
iget-object v0, p0, Lcom/android/systemui/statusbar/BaseStatusBar;->mRecents:Lcom/android/systemui/RecentsComponent;
if-eqz v0, :cond_0
[COLOR="Blue"].line 1165
invoke-static {}, Lcom/android/systemui/recents/RecentsActivity;->jret()V[/COLOR]
.line 1166
iget-object v0, p0, Lcom/android/systemui/SystemUI;->mContext:Landroid/content/Context;
NOTE!!!!!!!!!!!!
again you should change default field from iget to be sget
like we did before on notifpanel smali
BEFORE
Code:
iget-object v1, p0,Lcom/android/systemui/recents/RecentsActivity;->mRecentsView:Lcom/android/systemui/recents/views/RecentsView;[/HIDE]
AFTER
Code:
sget-object v1, Lcom/android/systemui/recents/RecentsActivity;->mRecentsView:Lcom/android/systemui/recents/views/RecentsView;[/HIDE]
Do It On Every Line That Have End Line Like Thi
Code:
Lcom/android/systemui/recents/RecentsActivity;->mRecentsView:Lcom/android/systemui/recents/views/RecentsView;[/HIDE]
About 15 Or 20 Change Just Follow My Guide It Should Fine
PART 3 Settings
For Non Qs Edit Tile Option Use This For Include In To Setting
Code:
"realtime_effect_blur_expanded_recent_para****"
you must complete the blur guide before apply this mod
#For non QSsetting like Pure CM13,
tested: DU 10.1 Sprout Device
DC your Settings.apk
Remove The Stuff In To The Place
Add This To display_settings.xml or wherever you like
Code:
<PreferenceScreen android:title="Expanded Blurr" android:key="blur" android:fragment="in.para****.BlurFragment" />
Add To Your Androidmanifest.xml Above </application>
Code:
<activity android:label="Blur Setting" android:name="in.para****.BlurFragment">
<intent-filter>
<action android:name="android.intent.action.MAIN" />
</intent-filter>
</activity>
RC and DC again..
Change Public id 0x7f080093 > xml="blur" with your own public values
oke? DONE!
Credit::
Dedy Prayetno/psidco
Serajr
Abdullah Ba'agil/ kingdj
MAAaDr (mediatek android art&dev) on fb
sidik ahmad (for non apk guide)
Screenshoot
Thank to @@DSttr for help to create this guide
Screenrecord
https://m.youtube.com/watch?v=t0QnosnXjJk&feature=youtu.be
NO BUG SO FAR EXCEPT THAT HEADSUP BLUR WILL TRY TO UPDATE THE GUIDE FOR REMOVE IT
:v :v good work sir
Amazing job
Envoyé de mon D6503 en utilisant Tapatalk
niaboc79 said:
Amazing job
Envoyé de mon D6503 en utilisant Tapatalk
Click to expand...
Click to collapse
Waiting for feedback
Waiting @serajr release the new live blur code ?
Sent from my GT-N7100 using XDA-Developers mobile app
psidco said:
Waiting @serajr release the new live blur code
Sent from my GT-N7100 using XDA-Developers mobile app
Click to expand...
Click to collapse
Can.t wait to taste the new source
Masterpiece!
I really like to see part of my work being ported everywhere, but this time with so such mastery... omg!!
Hats off!!
there is something wrong,? wkwkwk [emoji12]
Sent from my MI 3W using XDA-Developers mobile app
..
serajr said:
I really like to see part of my work being ported everywhere, but this time with so such mastery... omg!!
Hats off!!
Click to expand...
Click to collapse
Its happen because of you mate
Your blur make me crazy to always use it on any device and new api level hats off to you
Can.t wait to to see your new code of realtime blur. That.s must be awesome:good::good::good:
@DSttr said:
there is something wrong,? wkwkwk [emoji12]
Sent from my MI 3W using XDA-Developers mobile app
Click to expand...
Click to collapse
Yes kang, you *headshoot*
sorry I am not good at typing and speaking english ??? ?????
Sent from my MI 3W using XDA-Developers mobile app
serajr said:
I really like to see part of my work being ported everywhere, but this time with so such mastery... omg!!
Hats off!!
Click to expand...
Click to collapse
No sir,its your work im just make it for non exposed user,big thanks to you ,btw i need help on recent blur,whenever i change the background its always null,like that the recentrootview is not initialized
Edit: and yes its renderscript,gaussian seems broke on api 23,its give me a broken television bitmap bg lol
Sent from my GT-N7100 using XDA-Developers mobile app
kingdj said:
Its happen because of you mate
Your blur make me crazy to always use it on any device and new api level hats off to you
Can.t wait to to see your new code of realtime blur. That.s must be awesome:good::good::good:
Click to expand...
Click to collapse
psidco said:
No sir,its your work im just make it for non exposed user,big thanks to you ,btw i need help on recent blur,whenever i change the background its always null,like that the recentrootview is not initialized
Edit: and yes its renderscript,gaussian seems broke on api 23,its give me a broken television bitmap bg lol
Sent from my GT-N7100 using XDA-Developers mobile app
Click to expand...
Click to collapse
Great job guys... :good:
Btw... It is not broken, it's is working as expected. My xposed module for MM (api 23) makes use of it and is working like a charm.
You need to double check your code.
serajr said:
Great job guys... :good:
Btw... It is not broken, it's is working as expected. My xposed module for MM (api 23) makes use of it and is working like a charm.
You need to double check your code.
Click to expand...
Click to collapse
I will update it when u release it then , btw i remove the async task thing,cause its hard when use it for realtime efect,i think its make some problem occurs
Sent from my GT-N7100 using XDA-Developers mobile app
serajr said:
Great job guys... :good:
Btw... It is not broken, it's is working as expected. My xposed module for MM (api 23) makes use of it and is working like a charm.
You need to double check your code.
Click to expand...
Click to collapse
Really bro?
kingdj said:
Waiting for feedback
Click to expand...
Click to collapse
I will try asap
How to add the settings inside the quick settings edit first pane? The 2 sliders and switches.
Envoyé de mon D6503 en utilisant Tapatalk
niaboc79 said:
I will try asap
How to add the settings inside the quick settings edit first pane? The 2 sliders and switches.
Envoyé de mon D6503 en utilisant Tapatalk
Click to expand...
Click to collapse
Simply. Adding line to qs.setting xml
And modify qs.setting smali also adding helper smali.will give it soon
Already added on 1st post bro