Related
I have a note 3, that I'd like to root and install a non Att OS.. it's no longer a covered phone..and I don't care about tripping knox.. Searching for Root and Note 3 and ATT find all kind of way to root and install safestrap.. is that the only way to custom rom this phone?
crysallis said:
I have a note 3, that I'd like to root and install a non Att OS.. it's no longer a covered phone..and I don't care about tripping knox.. Searching for Root and Note 3 and ATT find all kind of way to root and install safestrap.. is that the only way to custom rom this phone?
Click to expand...
Click to collapse
What are you running right now Kitkat, Lollipop? If you are on N900AUCUCNC2, you can use Towel root https://towelroot.com/ or Kingo root http://www.kingoapp.com/ The only way to install custom rom is to have Safestrap install as the bootloader is locked.
Rooted i747 said:
What are you running right now Kitkat, Lollipop? If you are on N900AUCUCNC2, you can use Towel root or Kingo root
Click to expand...
Click to collapse
I'm not the OP, but I have the same question: I have a stock Note 3 with Lollipop (N900AUCUEOC1). I'd love to root it. Is there a step-by-step guide, or better yet a tap-and-go app to achieve root?
Hiram_Q_Pustule said:
I'm not the OP, but I have the same question: I have a stock Note 3 with Lollipop (N900AUCUEOC1). I'd love to root it. Is there a step-by-step guide, or better yet a tap-and-go app to achieve root?
Click to expand...
Click to collapse
You can't root OC1, but you can use Odin to downgrade to NC2 and root it. Odin v.3.10.6 http://forum.xda-developers.com/attachment.php?attachmentid=3109599&d=1420980613. Once you Odin back you can use Towel root or Kingo root (links are posted above your post). Then install Supersu https://play.google.com/store/apps/details?id=eu.chainfire.supersu&hl=en and run it, install Busybox https://play.google.com/store/apps/details?id=stericson.busybox&hl=en open and install it, then Safestrap http://forum.xda-developers.com/devdb/project/dl/?id=7216. (You should make a backup once Safestrap is installed before you flash any Roms). Once you're done you can pick a Rom for your Note 3 http://forum.xda-developers.com/note-3-att/development Now you ever use Odin? http://www.samsungodindownload.com/odin-tutorial/ (The site only shows flashing the All-In-One file so you know). Use all 4 Odin files, N900AUCUCNC2 ODIN Files, BL https://www.androidfilehost.com/?fid=96042739161891602 AP https://www.androidfilehost.com/?fid=96042739161891890 CP https://www.androidfilehost.com/?fid=96042739161891603 CSC https://www.androidfilehost.com/?fid=96042739161891604
Brilliant! I'm rooted on Lollipop, and loving my Note 3 all over again. Thanks for the easy-to-follow instructions, that made it a breeze!
lil differant way
To shorten the process, I downloaded Chainfires app called FlashFire, Then Downloaded full OC1 odin tar and Full N2 Odin tar. I flashed Note 3 back to N2 with pc odin, I then transferred OC1 to my sd card installed Flashfire and used flash Fire to do a complete flash to OC1 while choosing to inject everroot. Saved tons of time and in my mind a lot cleaner. I also have ROM PRO TOOL BOX and Chainfires CF-Bench after installing all the apps I wanted and setting up my personal settings on the phone all together, I installed BusyBox Pro and did a smart install, then rebooted and performed a benchmark. Then opened Rom Pro Tool box and went to cpu and then the benchmark it recognized the benchmark from chainfires cf-bench app so I choose it and also clicked apply at boot. Rebooted and this Note is fast as light and reliable. FlashFire will make back ups for you if your worried about recovery and always a good Idea to have Helium and or Titanium to make a nandriod and a completed setup back up to store on your pc and cloud just in case. :fingers-crossed:
Does anyone know if Rooting directly from OC1 without a wipe is being worked on? :fingers-crossed: or should I just stop whining and just do one of the above options? :victory:
debugrr said:
Does anyone know if Rooting directly from OC1 without a wipe is being worked on? :fingers-crossed: or should I just stop whining and just do one of the above options? :victory:
Click to expand...
Click to collapse
Do from post #4
Help! Stuck on AT&T load screen after Odin
Followed post 4 instructions, but after Odin (which said PASS!), phone is now stuck on white boot screen with AT&T logo. Checked md5, everything checks out. What do you think went wrong?
camkatastrophe said:
Followed post 4 instructions, but after Odin (which said PASS!), phone is now stuck on white boot screen with AT&T logo. Checked md5, everything checks out. What do you think went wrong?
Click to expand...
Click to collapse
What was you running before, Lollipop? If you was, you need to do all four files not the All-In-One to change your boot loader back to NC2.
so much simpler
Thanks for making this simpler! If all goes well then you will be donated to good sir! now if you could just get someone on my at&t s5 active!
dwillimon said:
now if you could just get someone on my at&t s5 active!
Click to expand...
Click to collapse
I have a s5active and just love the hell out of it. I'm still kinda green with the rooting but have done several successful roots, but development is way out of my wheelhouse. Unfortunately I haven't found a developer that had been working on the active. I'm still looking though. Thanks for doing the outstanding organization you did for the note 3. I'm going to be doing it as soon as the laptop comes back from the shop. My wife will like fire cat I think. I just found the thread I needed for my active lol only one rim but better than nothing.
Hey all, I've been away since the Skyrocket days. For ODIN, what state does the phone need to be in. I have USB debugging Enabled, but the ODIN says Failed. I downloaded all 4 files. Nevermind, had to put the phone in download mode.
i used KingoRoot to "root" it said it was sucessful, but when i try SuperSU it said "SuperSu Binary needs to be updated. Continue"? when i click continue, i click on normal and it says "Installing, please wait" then it returns failed.. SuperSu binary is not updating what is the fix for this?
Kid27085 said:
i used KingoRoot to "root" it said it was sucessful, but when i try SuperSU it said "SuperSu Binary needs to be updated. Continue"? when i click continue, i click on normal and it says "Installing, please wait" then it returns failed.. SuperSu binary is not updating what is the fix for this?
Click to expand...
Click to collapse
I would install Root Checker https://play.google.com/store/apps/details?id=com.joeykrim.rootcheck&hl=en to see if your root is properly installed. You might have to use KingoRoot again. I usually stick with Towelroot.
i tried superuser and that said it might not have installed properly. I tried flashing the ODIN files again and now it says failed. I think i've bricked my phone and now im really frustrated
Kid27085 said:
i tried superuser and that said it might not have installed properly. I tried flashing the ODIN files again and now it says failed. I think i've bricked my phone and now im really frustrated
Click to expand...
Click to collapse
Can you get into download mode?
Rooted i747 said:
Can you get into download mode?
Click to expand...
Click to collapse
ok i have just gotten mad and constantly click on the start button in ODIN until it seemed to have worked. Well.. glad to say, my phone is up and running with 4.4.2 , rooted with TowelRoot, Installed SuperSu and installed BusyBox... now to find a cool rom to run it on. Thanks for all the help guys.
Rooted i747 said:
You can't root OC1, but you can use Odin to downgrade to NC2 and root it. Odin v.3.10.6 http://forum.xda-developers.com/attachment.php?attachmentid=3109599&d=1420980613. Once you Odin back you can use Towel root or Kingo root (links are posted above your post). Then install Supersu https://play.google.com/store/apps/details?id=eu.chainfire.supersu&hl=en and run it, install Busybox https://play.google.com/store/apps/details?id=stericson.busybox&hl=en open and install it, then Safestrap http://forum.xda-developers.com/devdb/project/dl/?id=7216. (You should make a backup once Safestrap is installed before you flash any Roms). Once you're done you can pick a Rom for your Note 3 http://forum.xda-developers.com/note-3-att/development Now you ever use Odin? http://www.samsungodindownload.com/odin-tutorial/ (The site only shows flashing the All-In-One file so you know). Use all 4 Odin files, N900AUCUCNC2 ODIN Files, BL https://www.androidfilehost.com/?fid=96042739161891602 AP https://www.androidfilehost.com/?fid=96042739161891890 CP https://www.androidfilehost.com/?fid=96042739161891603 CSC https://www.androidfilehost.com/?fid=96042739161891604
Click to expand...
Click to collapse
Thanks for this.
My note 3 is on OC2 and running Android 5.0.
Does this instruction work for my phone?
Thanks
I take no responsibility for what happens to your device if you follow this guide. Rooting or modifying carries risks, however I have tested this procedure many times with 100% success on my SM-t805. It should work for any device, but I can't confirm, so feedback please if it works for your device.
1. Firstly you need to downgrade your device to a XXU1ANF8 or earlier firmware suitable for your particular model. This is available at http://samsung-updates.com/ or you can use this one XSG-T805XXU1ANF8-20140625 which is for the T805 model only.
https://www.androidfilehost.com/?fid=23501681358555496 T800 only
Download and then install the firmware on your device with ODIN.
If you are still on Kitkat then there is no need to wipe the data partition. However if you are running Lollipop after successful installation you will need to boot into recovery POWER + HOME + VOL UP then select WIPE DATA/RESET -
YOU WILL LOSE ALL YOUR USER DATA SO BACK UP ANYTHING YOU NEED TO THE SD CARD FIRST!
NOTE: IF THE INSTALL FAILS AT HIDDEN.IMG OR CACHE.IMG SIMPLY BOOT INTO RECOVERY AFTERWARDS AND WIPE CACHE THEN CARRY ON WITH THE REST OF THE PROCEDURE.
2. Once booted into Android, set up your wifi and google account and skip everything else (this wont be needed if you didn't wipe the data partition)
3. Next we need to install a Few apps, so go ahead and install these apps from Play Store:
System app remover(root)
Root Validator
Terminal Emulator For Android
KINGROOT 4.1
Kingroot updates and earlier versions if posted version doesn't work:
http://androidxda.com/download-kingroot-application
Kingroot 4.5 (latest version)
We also need to download the package from this LINK
4. Using the built in File Manager extract the zip package to your internal SD card. Once extracted, inside the extracted folder is another folder called MRW.
THIS FOLDER NEEDS TO BE MOVED TO THE ROOT OF YOUR INTERNAL SD CARD OR THIS WON'T WORK.
5. Next go to Settings set your display timeout to 10 mins.
Now Run KINGROOT then wait for it to do it's thing. If it reboots part way through the process then after rebooting unlock your device, but don't touch anything for a couple of mins. The app should restart and continue. If you are successful you can move to the next step. If not, exit the app and run it again, it may take several attempts before you eventually achieve root.
6. After success uninstall the KINGROOT app (NOT KINGUSER) (not required with v4.5) and the other blue app with Chinese writing.
Now reboot - DO NOT RUN THE KINGUSER APP
7. Let your device fully boot then run the Terminal Emulator and wait for the command prompt
NOTE: IF AT ANY POINT YOU SEE A POP UP BOX WITH CHINESE WRITING ASKING YOU TO UPDATE THE KINGUSER APP SELECT CANCEL.
Now type or copy and paste the following command into the Terminal window:
su
It will ask for root permission, so select ALLOW.
Without closing the terminal emulator window, hit the HOME button and run the SYSTEM APP REMOVER app. (The app is red and simply called UNINSTALL)
The app will ask for root permission, hit ALLOW.
Look for the KINGUSER app then select it and uninstall it. Exit from the app.
Re-open the terminal emulator window and type the following:
sh /sdcard/mrw/root.sh
This will run a script, you will see a bunch of warnings, just ignore them .At then end of the script the SUPERSU app will run.
8. Hit CONTINUE then NORMAL.
Next you may see another message that 'Samsung knox has been detected'. When you see this message select CANCEL.
Once completed you should see a message saying that installation has been successful. Hit OK.
If you see the message again 'Samsung knox has been detected' select CANCEL then exit the SUPERSU app.
9 . Now check with ROOT VALIDATOR that you have root and everything looks ok.
DO NOT REBOOT.
The root is only temporary, if you reboot you will lose root.
10. The next step is to install our ROM of choice with Flashfire.
For more info on FLASHFIRE see here: http://forum.xda-developers.com/general/paid-software/flashfire-t3075433
11. Run FLASHFIRE and grant it root.
12. Agree to the disclaimer and then hit the Red circle with a white +.
Next select 'Flash firmware package' and then navigate to the firmware you want to install (in this case the stock tar package) and select it.
Wait until it finishes scanning the archive.
Next you will see the list of partitions to be flashed, all that is really required is BOOT, RECOVERY and SYSTEM. You can flash the others if you wish.
When you're happy hit the TICK and then you will see a list of what will be flashed. If you tap any one of them you will be able to change the options. Tap the REBOOT option then select DOWNLOAD from the list. This is so we can boot into download mode after the flashing process to flash the Lollipop BOOTLOADER. If not upgrading to lollipop just select REBOOT
I'd advise to leave the rest as is and then hit FLASH
NOW WATCH CHAINFIRES MAGIC!
13. After reboot it should boot directly into DOWNLOAD mode or REBOOT if not updating to Lollipop.
If updating to Lollipop we need to flash a Lollipop BOOTLOADER. I have provided a link below for the T800 and T805. If you have a T700/705/T807/T707 or if the ones provided don't work then you will have to extract it from the Lollipop stock ROM and then TAR it up.
T800XXU1BOCC_BOOTLOADER.tar
T805XXU1BOCC_BOOTLOADER.tar
Latest T800 boot loader thanks DUHasian skillz.
T800XXU1BOE3 bootloader
Flash the BOOTLOADER with ODIN.
If successful then after reboot you should have a rooted version of Lollipop or whatever rom you decided to install and an untripped Knox counter(hopefully)
Good luck and please give feed back.
If you wish you can give feedback to Chainfire at the link posted at the beginning of this post.
NOTE: If you wish to change roms or update and wish to keep root you will have to use the same procedure with Flashfire.
Also note that if you flash a custom KERNEL or BOOTLOADER then it may trip KNOX. Custom ROMs with stock KERNEL and BOOTLOADER should be OK(but don't hold me to that)
CREDITS TO CHAINFIRE FOR FLASHFIRE AND SUPERSU, KINGTEAM FOR ROOT AND WOLFDROID FOR THE KINGROOT REMOVAL SCRIPT.
My god I've been waiting for a thread like this one for a long time.
I don't have time to try it today but I'll give you feedback in a day or two.
Feedback here http://forum.xda-developers.com/showpost.php?p=61296003&postcount=12
Moderators, this thread should be sticked
Just so that I understand the limits of this method I need to ask. Is this method specific to achieve rooted (SuperSU) Lollipop 5.0.2 without tripping Knox or can further changes be made? For example:
1) Remove system apps (removing bloat).
2) Adding system apps such as Viper4Android, busybox, which must be installed in /system/priv-app
3) The Lollipop/Samsung compatible XPosed framework and modules
4) Installing a Tab S model compatible recovery (e.g. TWRP) as I would really like nandroid backups.
I only ask as in the Tab S Kingroot thread there was a post which mentioning that despite Kingroot having successfully achieved root without tripping Knox if you messed with the /system partition files there was the possibility of tripping Knox.
The comment in step 12 "... then navigate to the firmware you want to install ..." suggests that you could install one of the model compatible custom ROMs (e.g. CM). Is that a correct assumption or right now are you restricted to Lollipop stock? Some of those ROMs are from Lollipop 5.1.1 AOSP source (e.g. CM 12.1) which may be going too far with this method and still not trip Knox.
One last question, if I did implemented this could I go back to a pure unrooted stock kitkat/lollipop using Odin or Flashfire without tripping Knox? Odin would be fine.
I greatly appreciate the effort and quality of your post. I had hoped that a "Knox off" SuperSU lollipop root would be found for my month old Tab S 10.5 as I'm used to the low risk flashing on the Nexus devices and have had a mean itch to root without obvious risk to my warranty.
Thanks again
This method can be used to root any Rom.
Once you have root you can practically do what you please.
As for tripping Knox if you mess with the system partition, that's the whole point of root it already messes with the system partition. It shouldn't trip Knox, but never say never.
Just ensure once you have root you remove everything Knox related.
I can't confirm if a custom Rom will trip Knox, but as already stated as long as the bootloader and kernel are stock I believe it won't trip Knox.
Custom recovery may trip Knox.
You can go back to stock any time you wish.
ashyx, as I'm a Linux user its taken me a while to set up a Windows machine but I finally have KIES working and Odin recognizing my Tab S. Now I'm doing my "read your how-to OP twice and root once" prework, but I'm left with a bit of confusion. In my case I am already on Lollipop 5.0.2 so have downloaded stock 4.4.2. When I read steps 12 and 13 I became a bit confused.
What I want is to be rooted (SuperSu) on stock lollipop (T800XXU1BOE2) so I'm assuming that in step 12 I will be using Flashfire to flash boot, recovery and system from the Samsung stock 5.0.2 lollipop firmware file. My confusion comes in step 13 as it seems redundant to flash the lollipop bootloader I just flashed in step 12. Is step 13's flashing the bootloader redundant if you flashed it in step 12?
I apologize if this is a noob question but I just want to get things right and avoid a bricked device especially when the bootloader is involved. At this point I'm only looking to remove bloat and add specific apps that require root so rooted stock is good enough but I'll be in position to try a custom ROM if I feel the need.
Thanks again
3DSammy said:
ashyx, as I'm a Linux user its taken me a while to set up a Windows machine but I finally have KIES working and Odin recognizing my Tab S. Now I'm doing my "read your how-to OP twice and root once" prework, but I'm left with a bit of confusion. In my case I am already on Lollipop 5.0.2 so have downloaded stock 4.4.2. When I read steps 12 and 13 I became a bit confused.
What I want is to be rooted (SuperSu) on stock lollipop (T800XXU1BOE2) so I'm assuming that in step 12 I will be using Flashfire to flash boot, recovery and system from the Samsung stock 5.0.2 lollipop firmware file. My confusion comes in step 13 as it seems redundant to flash the lollipop bootloader I just flashed in step 12. Is step 13's flashing the bootloader redundant if you flashed it in step 12?
I apologize if this is a noob question but I just want to get things right and avoid a bricked device especially when the bootloader is involved. At this point I'm only looking to remove bloat and add specific apps that require root so rooted stock is good enough but I'll be in position to try a custom ROM if I feel the need.
Thanks again
Click to expand...
Click to collapse
Good question. DO NOT flash bootloader in step 12 (newer bootloader) as Knox is likely to be tripped when you flash the 4.4.2 bootloader via odin in step 13. That was the instruction in Mobile odin (which could not flash bootloader). Flashing bootloader in step 12 is redundant.
shayind4
shayind4 said:
Good question. DO NOT flash bootloader in step 12 (newer bootloader) as Knox is likely to be tripped when you flash the 4.4.2 bootloader via odin in step 13. That was the instruction in Mobile odin (which could not flash bootloader). Flashing bootloader in step 12 is redundant.
shayind4
Click to expand...
Click to collapse
Firstly, nowhere does it state to flash the kitkat bootloader on a lollipop Rom in step 12 or 13.
By step 13 you should be running a lollipop Rom.
Secondly Knox should not trip when flashing a stock bootloader. The bootloader can be flashed independently in Odin.
Lastly Flashfire does NOT flash bootloaders.
If you don't flash the bootloader your Rom won't boot.
I suggest you digest the guide again.
3DSammy said:
In my case I am already on Lollipop 5.0.2 so have downloaded stock 4.4.2. When I read steps 12 and 13 I became a bit confused.
What I want is to be rooted (SuperSu) on stock lollipop (T800XXU1BOE2) so I'm assuming that in step 12 I will be using Flashfire to flash boot, recovery and system from the Samsung stock 5.0.2 lollipop firmware file. My confusion comes in step 13 as it seems redundant to flash the lollipop bootloader I just flashed in step 12. Is step 13's flashing the bootloader redundant if you flashed it in step 12?
Click to expand...
Click to collapse
It doesn't state to flash the boot loader in step 12? :what:
Your boot loader will be replaced when you downgrade to kitkat via Odin.
You need to reflash the lollipop boot loader after using Flashfire to install your Lollipop Rom or it won't boot.
Do i need to use a prerooted rom with flashfire, to maintain root, or can i just flash any original samsung room even if its not prerooted?
Paddiii said:
Do i need to use a prerooted rom with flashfire, to maintain root, or can i just flash any original samsung room even if its not prerooted?
Click to expand...
Click to collapse
No, this is the whole point of the post. Flashfire will root for you.
ashyx said:
It doesn't state to flash the boot loader in step 12? :what: ...
Click to expand...
Click to collapse
My bad, I saw the word "Boot" in step 12 and incorrectly assumed that was referring to a bootloader image.
Thanks for correcting me and your patience.
Sorry for being so long to give the feedback I promised.
I have one thing to say: thank you ! Your method works perfectly ! I am now running stock samsung lollipop on my T800 with knox untripped (0x0).
Little thing: your 4.4 file for the T800 isn't working (something wrong when flashing for the Hidden img). I took the same file but in XEF (I'm in France).
I just have a few questions now that could help other users:
-You say you are not sure about flashing another rom as long as it is with stock kernel and bootloader. But on a scale from 0 to 10 how sure are you about it working ? (I know you don't have any responsability in what happens, I just want a piece of advice).
- If for any reason I want to go back to stock, I just need to reflash the firmware with Odin ?
-Can I uninstall apps like the knox related ones without any risk about tripping knox ? (I think it is okay) (Edit: Ok I did it and knox not tripped. I used this tool http://forum.xda-developers.com/android/software/debloater-remove-carrier-bloat-t2998294 that is very convenient for that purpose )
Again thank you for this tutorial !
bibihub said:
Sorry for being so long to give the feedback I promised.
I have one thing to say: thank you ! Your method works perfectly ! I am now running stock samsung lollipop on my T800 with knox untripped (0x0).
Little thing: your 4.4 file for the T800 isn't working (something wrong when flashing for the Hidden img). I took the same file but in XEF (I'm in France).
I just have a few questions now that could help other users:
-You say you are not sure about flashing another rom as long as it is with stock kernel and bootloader. But on a scale from 0 to 10 how sure are you about it working ? (I know you don't have any responsability in what happens, I just want a piece of advice).
- If for any reason I want to go back to stock, I just need to reflash the firmware with Odin ?
-Can I uninstall apps like the knox related ones without any risk about tripping knox ? (I think it is okay) (Edit: Ok I did it and knox not tripped. I used this tool http://forum.xda-developers.com/android/software/debloater-remove-carrier-bloat-t2998294 that is very convenient for that purpose )
Again thank you for this tutorial !
Click to expand...
Click to collapse
The hidden.img failure is because its carrier/region related.For some it will flash ok, for others it will fail. It isn't actually required at all. Even if it fails to flash the rest of the Rom will.
All that needs to be done after that failure is to wipe cache in recovery.
As regards flashing custom roms. Remember your Rom is already custom as you have modified it.
I would say a good chance custom stock roms won't trip Knox as long as it's build properties reflect its a stock Rom.
However something like Cyanogen probably would trip Knox as its not based on stock.
I won't say this is for sure, but I think it's the general consensus.
Over one thousand views and literally only one person has bothered posting feed back.
ashyx said:
Over one thousand views and literally only one person has bothered posting feed back.
Click to expand...
Click to collapse
OK now two. I successfully applied your instructions yesterday. I really appreciate your guide.
What I did, differently is flashed with Odin using a Virtualbox Windows guest VM from my Ubuntu 14.04 host PC. It took a few days of false starts to get that working. Here is a "[How-To] Linux, Virtualbox and ODIN for your Samsung device", that I just posted to help others who do not have access to Windows machines.
Of the whole procedure the scariest moment was after flashing 4.4.2 stock with Odin over my devices 5.0.2 install. The reboot was too fast for me to get into recovery to wipe user data. I could not power off the SM-T800 and holding POWER + VOL DOWN just rebooted where it would hang displaying "SAMSUNG".
Booting into recovery ( POWER + VOL UP + HOME) had no effect what so ever. Finally I found that if I was fast enough I could reboot (POWER + VOL DOWN) and as soon as the screen went blank hold down the "POWER + VOL UP + HOME" buttons, then the tablet booted into recovery where wiping user data worked as described in your guide.
After completing your guide I am on stock Android 5.0.2 with Knox 0x0000.
My root apps so far:
Busybox
Titanium backup
GMD Gestures.
ES File Explorer with RW access to all partitions
System Uninstall Pro
Universal init.d
See Update below: "Unfortunately so far Viper4Android is not working as I cannot get SELinux permissive enabled either by the SELinux app or an init.d shell script using the "setenforce 0" command. From what I've read that is due to the Samsung stock bootloader."
V4A now works, see: "[HOW-TO] Installing Viper4Android (V4A) Audio on a Lollipop Tab S"
I took the high road and only froze the following KNOX related apps using titanium backup:
com.sec.enterprise.knox.attestation
KLMS Agent
KNOX
KNOX
KNOX II
KNOX SetUpWizardClient
So far I debloated 117Mgs of other apps using System Uninstall Pro. I bought the pro version of Flashfire just to show respect for Chainfire's development efforts. I have not tried to see if Flashfire's backups can be successfully restored yet.
Thanks again for your guide.:good:
Thanks for the feedback, it's constructive and encouraging for others to know It's successful.
For future reference you can disable auto reboot in Odin then manually reboot with POWER + VOL DOWN + HOME then as soon as it restarts switch to VOL UP while continuing to hold the other buttons.
The above procedure can be used at any point and will restart the device and get you into recovery every time.
just registered to suport OP, it works
I thought I did not need to run the su script as I could use kinguser w/o problems. But the flashfire is not compatible with other kinguser. Hope chainfire could remove this restriction. Maybe there is another way to flash rom or other mobile odin alternatives.
The OP could add a link about how to use odin for newbies like me. The odin 3.10 have different wording than previous version.
One more thing to mention is that the kingroot will work if you downgrade. I was in kitkat XXU1ANFB which is only one version up. The kingroot failed 20 times. XXU1ANF8 only takes 3 times to work.
After debloating in lolipop, the system is not smoother than before. The display has less contrast and dimer than kitkat. I did not wipe data/cache so my setting stays the same.
I rooted only for better battery performance as charging will take 10+ hours and could not hold charge at use with power cord plugged. It seems that the performance is not improved for this device after debloating.
vancities said:
I thought I did not need to run the su script as I could use kinguser w/o problems. But the fireflash is not compatible with other root authorization app. Hope chainfire could remove this restriction. Maybe there is another way to flash rom or other mobile odin alternatives.
The OP could add a link about how to use odin for newbies like me. The odin 3.10 have different wording than previous version.
One more thing to mention is that the kingroot will work if you downgrade. I was in kitkat XXU1ANFB which is only one version up. The kingroot failed 20 times. XXU1ANF8 only takes 3 times to work.
After debloating in lolipop, the system is not smoother than before. The display has less contrast and dimer than kitkat. I did not wipe data/cache so my setting stays the same.
I rooted only for better battery performance as charging will take 10+ hours and could not hold charge at use with power cord plugged. It seems that the performance is not improved for this device after debloating.
Click to expand...
Click to collapse
I'm not quite sure what you're saying, but I think youre saying you had success?
Regarding Odin, it is not the intention of this post to spoon feed every single step, some knowledge is expected prior to following this guide. Anything relating to the actual process in this guide is explained in detail. Any other information you would ever require is already posted on XDA.
ashyx said:
I'm not quite sure what you're saying, but I think youre saying you had success?
Regarding Odin, it is not the intention of this post to spoon feed every single step, some knowledge is expected prior to following this guide. Anything relating to the actual process in this guide is explained in detail. Any other information you would ever require is already posted on XDA.
Click to expand...
Click to collapse
I had success. What I mean is the step 6 7 8 9 are not necessary if flashfire could work with kinguser.
Also kingroot only works on XXU1ANF8 and maybe lower. I mentioned this because in other thread about kingroot, someone got success but most did not.
So my feedback . everything was great , was a little confused about Odin at first but like you said everything can be found on xda. Need to be on the most recent Odin which I believe is 3.10. Kingroot took forever to root but I believe it has something to do with connectivity to the servers. So my tab s is rooted no Knox counter. I'm hoping the custom tw rom doesn't revert all the hard work ? thanks again op.
#1-"com.tmobile.pr.adapt (10001) has been granted superuser permissions for an interactive shell" pops up on my screen every 30 seconds on the bottom of my screen in a grey box.
#2- i also noticed that i can accept and recieve calls but i can not hear, nor can the other person hear me. if i use hangouts video call, skype, etc it works fine.
#3-i also tried to get rom manager to make a recovery and it says it needs to get CWD recovery to install a new software, the first thing we need to do is install a up to date version, we will begin that process now... etc.. then it says to get started you must first sset up a custom recovery, it gives two options a samsung galaxy s3 on metro pcs or a samsung previal 2 on boost mobile, or device not listed, when i click that it says "SM-G920T does not have an officially supported CWDR yet. Have you installed a CWD based recovery manually?" so im not sure what to do from there, or if i even need that. i have been a iphone user since day one went to android after reading up a lot on it, although rooting is quite different than jailbreaking it seems, i am incredibly excited to get started if i can get past these little problems and get started and figure everything out. ANY advice, or anwsers to these problems would be Greatly appreciated! thanks!
Also i went to dev options in settings and noticed the "OEM unlocking- allow the bootloader to be unlocker" was turned off, i dont know if this is necessary to root if i did something wrong by not turning it on or what, or if it may fix any problems above if i turn it on now. thanks!
I have a samsung Galaxy S6 (SM_G920T) . i Rooted and did not trip Knox, Although i did just remember that my fingerprint sensor is not working either.
Thank you guys so much this si a incredible forum i have spent hours and hours reading and researching before making this post i appreciate it so much!
#1 Freeze that ****. Use some root tool to freeze that T-mobile apk, seems u gave it root permissions at some point. I believe there are a lot of apps that you will want to do the same.
#2 ? No idea. Stock rom/kernel?
#3 What is this I don't even. Don't do that. Go to TWRP's official web, get your zeroflte (SM-GT920T) twrp and flash it via ODIN, or else get the recovery.img and use flashify. All that assuming you want a custom recovery.
You will need to unlock the bootloader if you are on 5.1.1. I believe locked will prevent changes or wiping anything on the OS partitions, even recovery (can someone confirm?)
I believe jailbraking and rooting should be pretty much similar, if not the same, as both target to grant the user root access to do whatever he pleases on the OS.
Welcome to android btw.
How did you root? Sounds like you used the modified sboot which causes no sounds in calls and nonfunctional fingerprint scanner. If so, flash back to stock and use a different rooting method. The rest, pretty much what the above poster stated
Root
I rooted using the version that I found the only one that works it seemed like, went to Odin put my phone In download mode and then put the boot loader download in BL and the. Put a something unikernel.sbin I believe, whatever the guide said also then it was done. I thought you couldn't use the twrp or custom recovery etc on tmobile one yet but I just read a thing about xtrestolite odex pure v2 which says it's for 5.1.1 and my model of phone but in the guide it says to root using CF auto root and a link there to it but the link doesn't have my phone on the list that the guide that clearly is my phone says to use I don't know if I'm missing something but I want to use it I understand most of it but I don't know if I need to unropt first and re root then use Odin and flash twrp that's supported on my phone then use that to recover the rom. Etc. The kernel that says is used in the guide is the same one I downloaded so do I need to remove it all then let it do that or?
Sorry if this didn't make sense I'm halfway there between confused and understood I have spent the last 10 hours reading and trying to figure this out though lol. Thanks guys!
Also
Sorry for adding more but also how do I flash back to stock? Search for the download to the stock image of my phone? Also I could only find one way of rooting everything else said it wasn't working yet or am I missing a big portion of something here?
Just flash the 5.1.1 firmware to return to stock. To root, flash unikernel with Odin. The other method you used was to not trip knox, but as you experienced has side effects. I had to Odin back to 5.1.1 myself. Can't have those issues
thanks!
so how do i flash back to 5.1.1? find the ling to completely stock 5.1.1 and flash through odin in the same spot and same way i flashed the kernel to root? also.. i rooted with " s6_UniKernel_v2-0003-ODIN.tar" is that not the one you were talking about?
CjetOKC said:
so how do i flash back to 5.1.1? find the ling to completely stock 5.1.1 and flash through odin in the same spot and same way i flashed the kernel to root? also.. i rooted with " s6_UniKernel_v2-0003-ODIN.tar" is that not the one you were talking about?
Click to expand...
Click to collapse
Yes, flashing to 5.1.1 works exactly like that. You need to get the version for your model (very important on this one) and then simply place that file in the AP field of ODIN while the device is in recovery mode. It is normal for ODIN to freeze for 2 minutes while verifying. Make sure to use a MD5 checker tool on the firmware before flashing.
Rooting has historically required more technical savvy and balls than jailbreaking, but PingPong made rooting the S6 brain-dead simple. CF-Auto root is still pretty painless, but you must make sure you have the right zip for your device.
Anyhoo, the quickest & easiest way to restore phone calls & fingerprint scan is to use Odin to get back to bone stock.
Next, use PingPong to root. After rooting, "com.tmobile.pr.adapt" will ask for root access. That is T-Mobile's "phone home" app and sends info about your device (probably including root status). Deny it root access and make sure you check "Remember my choice", and it won't bother you again. You will not lose any functionality by denying it root, so terminate that crap.
Don't bother with rom manager. CWM is archaic. If you want a custom recovery, use TWRP. You can install TWRP either using Odin or TWRP Manager app (it's free).
Good luck and have fun with your S6
CjetOKC said:
Sorry for adding more but also how do I flash back to stock? Search for the download to the stock image of my phone? Also I could only find one way of rooting everything else said it wasn't working yet or am I missing a big portion of something here?
Click to expand...
Click to collapse
Are you still rooted? If so, and if you are experiencing the call audio issue, go flash AOU's kernel. He has made a kernel for the tmo s6. that should eliminate your call audio issue. The finger print scanner is the only issue with flashing his kernel. Also, I rooted with the modded sboot, his TWRP and kernel, and I didn't trip knox
http://forum.xda-developers.com/tmo...recovery-twrp2-8-6-0-g925t-5-1-1-of6-t3143002
Running stock 6.0.1 on my G920T, updated OTA. I've tried flashing TWRP, but ends up stuck at the Samsung Logo...
The new firmware prevents downgrading too, so I can't really downgrade without doing some changes...
If I can't root, are there any root kernels/custom roms available? (That support the EPF1 update)
Any help would be greatly appreciated.
msoza1 said:
Running stock 6.0.1 on my G920T, updated OTA. I've tried flashing TWRP, but ends up stuck at the Samsung Logo...
The new firmware prevents downgrading too, so I can't really downgrade without doing some changes...
If I can't root, are there any root kernels/custom roms available? (That support the EPF1 update)
Any help would be greatly appreciated.
Click to expand...
Click to collapse
Google cf auto root and go to their website and then find the right file for the s6 (should be zerofltemo or something like that). Download the latest version of odin if you don't already have it. Click the ap button once odin is open and select the cf auto root file you downloaded. Put your phone into download mode and connect it to your computer and hit start in odin. If everything goes well it will install root then you can flash twrp via odin also. There's a thread with more detailed instructions on here if you search for it
kenpachi100 said:
Google cf auto root and go to their website and then find the right file for the s6 (should be zerofltemo or something like that). Download the latest version of odin if you don't already have it. Click the ap button once odin is open and select the cf auto root file you downloaded. Put your phone into download mode and connect it to your computer and hit start in odin. If everything goes well it will install root then you can flash twrp via odin also. There's a thread with more detailed instructions on here if you search for it
Click to expand...
Click to collapse
I've already looked through CF's auto root, there isn't one (fully) compatible with build #G920TUVU4EPF1. I've tried using an eariler build (MMB29K.G920TUVU3EPD1 of auto root), which softbricked my phone, it's fine now but I'm not risking that again. Thanks for the help anyway!
msoza1 said:
I've already looked through CF's auto root, there isn't one (fully) compatible with build #G920TUVU4EPF1. I've tried using an eariler build (MMB29K.G920TUVU3EPD1 of auto root), which softbricked my phone, it's fine now but I'm not risking that again. Thanks for the help anyway!
Click to expand...
Click to collapse
You're right there isn't one for our specific build but that one will work because it's the one I used. You have to enable your developer options and turn on oem unlock and it won't soft brick. Sorry forgot to mention that part lol
msoza1 said:
I've already looked through CF's auto root, there isn't one (fully) compatible with build #G920TUVU4EPF1. I've tried using an eariler build (MMB29K.G920TUVU3EPD1 of auto root), which softbricked my phone, it's fine now but I'm not risking that again. Thanks for the help anyway!
Click to expand...
Click to collapse
Let me know if it works after doing that
Sent from my SM-G920T using XDA-Developers mobile app
Look at Post #7, I expanded on everything you need to do to root it. http://forum.xda-developers.com/tmo...w-to-root-samsung-galaxy-s6-sm-g920t-t3382856
Thanks everyone! I'm Rooted. I looked at everyone's solutions, but decided to take my own. Using Idlekernel TWRP, I was able to install TWRP & Root from there.
msoza1 said:
Thanks everyone! I'm Rooted. I looked at everyone's solutions, but decided to take my own. Using Idlekernel TWRP, I was able to install TWRP & Root from there.
Click to expand...
Click to collapse
Can you let me know which one you use , i have G920T PF1
Okay, so thanks to this thread here: https://forum.xda-developers.com/tmo...t3382856/page6 and the person who did it (to my knowledge) @AZWildcat
Copy & pasted @ktrinh4213
1) Update Your Samsung Galaxy S6 SM-G920T T Mobile to Marshmallow If You Didn't Done Yet -- CF-Auto Root works on all versions of Android thus far. "CF-Auto-Root-zerofltetmo-zerofltetmo-smg920t.zip"
2) Download CF-Auto-Root Samsung Galaxy S6 SM-G920T T Mobile 6.0.1 Marshmallow.Just Search it in Google And download From Chainfire
3) Download And Install the Samsung USB Driver in your PC.
4) Extract the CF-Auto-Root files in your PC.
5) Go to Settings->About Device->Tap Build Number until Developer Options is unlocked.
6) Go back to Settings-> Developer Options-> Toggle OEM Unlock. This will prevent your device from being soft-bricked (and save you time downloading and reinstalling the OEM ROM).
7) Switch off your Mobile. Enter into Download mode->Volume Down+Home+Power Buttons.
8) After entering into Download Mode it will say Warning Press Volume Up button to continue.
9) Connect Your Mobile With PC via USB Cable.
10) Launch Odin Application.It Will Show the message "ADDED!!!". If you did not get this message Repeat the above steps.
11) After Getting Added Message Select PDA Button then Browse for the CF-Auto-Root file. If using Odin 10.x, look for the AP button, and search for the CF-Auto Root file. Select it. Where the messages populate, go to the Options tab. Tick the Auto reboot. THIS WILL TRIP KNOX.
12) Press Start wait for the tasks to complete.It may enter into Recovery mode to add the SuperSu permissions.
13) Reboot again.
You can See the Superuser after the Reboot in your Applications list.
Sorry if I did tagging wrong I usually lurk
Flash TWRP and then the SuperSU ZIP.
Also auto root still work. At least it did on mine phone
britchel said:
Also auto root still work. At least it did on mine phone
Click to expand...
Click to collapse
The baseband isn't listed on Autoroot which is why I've not used it.
Obievil said:
The baseband isn't listed on Autoroot which is why I've not used it.
Click to expand...
Click to collapse
That is the same reason I havent either ;-;
EncryptedCurse said:
Flash TWRP and then the SuperSU ZIP.
Click to expand...
Click to collapse
sorry it has been a long time since i rooted my phone i know how to install twrp and supersu but how does just installing supersu root my phone i thought you had to have a rooted phone to install supersu
britchel said:
Also auto root still work. At least it did on mine phone
Click to expand...
Click to collapse
what was your base?
timspotatochips said:
sorry it has been a long time since i rooted my phone i know how to install twrp and supersu but how does just installing supersu root my phone i thought you had to have a rooted phone to install supersu
Click to expand...
Click to collapse
Super SU does require root. I was confused by his answer as well. I wondered if I could use the latest Base for my phone from Autoroot but I'm not willing to risk it without knowing for sure.
Obievil said:
Super SU does require root. I was confused by his answer as well. I wondered if I could use the latest Base for my phone from Autoroot but I'm not willing to risk it without knowing for sure.
Click to expand...
Click to collapse
Yeah haha well i dont mind testing it in a few weeks and I can let you know unbricking usually isnt hard just flashing stock usually will fix it I was also curious if I could downgrade by flashing stock roms cause i dont care about knox
timspotatochips said:
what was your base?
Click to expand...
Click to collapse
EQC1, I think... the one before this one... there's actually a tread on how to root s6 with mm
britchel said:
EQC1, I think... the one before this one... there's actually a tread on how to root s6 with mm
Click to expand...
Click to collapse
oh okay do you have the link please and thank you ))?
timspotatochips said:
Yeah haha well i dont mind testing it in a few weeks and I can let you know unbricking usually isnt hard just flashing stock usually will fix it I was also curious if I could downgrade by flashing stock roms cause i dont care about knox
Click to expand...
Click to collapse
My phone is out of contract so I don't care about knox anymore, It's been so long I am still a little afraid of bricking it. the last phone I rooted was the Galaxy S3, believe it or not lol!
Obievil said:
My phone is out of contract so I don't care about knox anymore, It's been so long I am still a little afraid of bricking it. the last phone I rooted was the Galaxy S3, believe it or not lol!
Click to expand...
Click to collapse
oh dang last phone I rooted was my nexus 6 and knox is useless im sure you can still encrypt your phone without it and well samsung pay is ass and you can get a new kernal for fingerprint scanner if it no longer works but ill let you know if I am able to root my phone I assume youre on the same firmware as me?
timspotatochips said:
oh dang last phone I rooted was my nexus 6 and knox is useless im sure you can still encrypt your phone without it and well samsung pay is ass and you can get a new kernal for fingerprint scanner if it no longer works but ill let you know if I am able to root my phone I assume youre on the same firmware as me?
Click to expand...
Click to collapse
Yes I am, it's how I landed on this thread.
Obievil said:
Yes I am, it's how I landed on this thread.
Click to expand...
Click to collapse
haha i assumed so just wanted to clarify
Just out of stupidity, and morbid curiosity I tried to Autoroot the last known good rom from that site. And it failed with a FRP lock error message. I'm surprised it didn't brick.
Hey why don't you make your own rom. Pretty easy... you customize it to your like, I made mine and it's pretty stable. And it roots it from pc
britchel said:
Also auto root still work. At least it did on mine phone
Click to expand...
Click to collapse
britchel said:
Hey why don't you make your own rom. Pretty easy... you customize it to your like, I made mine and it's pretty stable. And it roots it from pc
Click to expand...
Click to collapse
I don't think you understand. The rom isn't the issue here, It's getting root access that's the problem.
Okay, so thanks to this thread here: https://forum.xda-developers.com/tm...oot-samsung-galaxy-s6-sm-g920t-t3382856/page6 and the person who did it (to my knowledge) @AZWildcat
Copy & pasted @ktrinh4213
1) Update Your Samsung Galaxy S6 SM-G920T T Mobile to Marshmallow If You Didn't Done Yet -- CF-Auto Root works on all versions of Android thus far. "CF-Auto-Root-zerofltetmo-zerofltetmo-smg920t.zip"
2) Download CF-Auto-Root Samsung Galaxy S6 SM-G920T T Mobile 6.0.1 Marshmallow.Just Search it in Google And download From Chainfire
3) Download And Install the Samsung USB Driver in your PC.
4) Extract the CF-Auto-Root files in your PC.
5) Go to Settings->About Device->Tap Build Number until Developer Options is unlocked.
6) Go back to Settings-> Developer Options-> Toggle OEM Unlock. This will prevent your device from being soft-bricked (and save you time downloading and reinstalling the OEM ROM).
7) Switch off your Mobile. Enter into Download mode->Volume Down+Home+Power Buttons.
8) After entering into Download Mode it will say Warning Press Volume Up button to continue.
9) Connect Your Mobile With PC via USB Cable.
10) Launch Odin Application.It Will Show the message "ADDED!!!". If you did not get this message Repeat the above steps.
11) After Getting Added Message Select PDA Button then Browse for the CF-Auto-Root file. If using Odin 10.x, look for the AP button, and search for the CF-Auto Root file. Select it. Where the messages populate, go to the Options tab. Tick the Auto reboot. THIS WILL TRIP KNOX.
12) Press Start wait for the tasks to complete.It may enter into Recovery mode to add the SuperSu permissions.
13) Reboot again.
You can See the Superuser after the Reboot in your Applications list.
Sorry if I did tagging wrong I usually lurk
This worked, I just rooted my device! Thank you for linking this!