Wifi reception signal is too low.. - Galaxy S I9000 Q&A, Help & Troubleshooting

I'm using Mackay CM9 Rom and the wifi signal in this old little beast is too low when compared to any other phone in my house.
Is anybody else experiencing similar issues?
I'm on i9000XXJVT baseband BTW.
Thank you.

Hameedhudeen said:
I'm using Mackay CM9 Rom and the wifi signal in this old little beast is too low when compared to any other phone in my house.
Is anybody else experiencing similar issues?
I'm on i9000XXJVT baseband BTW.
Thank you.
Click to expand...
Click to collapse
Check in the WiFi settings if you can check the asian frequencies. I don't remember if CM9 already features that option.
tetakpatalked from 1+One

tetakpatak said:
Check in the WiFi settings if you can check the asian frequencies. I don't remember if CM9 already features that option.
tetakpatalked from 1+One
Click to expand...
Click to collapse
No. There's no option for that.
Does CM 12 has such option?

Hameedhudeen said:
No. There's no option for that.
Does CM 12 has such option?
Click to expand...
Click to collapse
It should be under settings/wifi/menu/advanced, IDK if it was featured in the ICS.
I don't know about CyanogenMod options for I was not using CM since years. I never had CM12 on any device. Now I write from SlimKat (4.4.4) and the wifi region options are there, look at the screenshot. I wouldn't go much further than 4.3 on the i9000 BTW, it gets quite laggy. CM9 was much faster than later ROMs for it has just fragment of the size.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
tetakpatalked from Nexus 7 flo

Related

[cys460 ROM] Froyo 2.2.2-20.03.2011

This is rom from chinese forum darkforcesteam developed by cys460.
I just removed chinese apps.
Original thread: http://www.darkforcesteam.com.cn/forum.php?mod=viewthread&tid=31873&extra=page%3D1
Download link: http://dl.dropbox.com/u/6832810/%5Bcys460%20ROM%5D%20Froyo%202.2.2-11.3.20.zip
Build: Froyo 2.2.2. (I think is based on XDAndroid 2.2.2 build FRX05.)
Kernel: Probably its latest duckly's X1-kernel-modules-2011-03-19-1300544600.
Neocore: 21.4 fps
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
very nice work !!!
but call, microphone dont work...
sorry my english
wifi not working for me. didn't try any calls
this is weird. try restart or reinstall guys. because wifi & microphone worked for me.
i can't try it again, because im on CyanogenMod 7 now.
preston74 said:
this is weird. try restart or reinstall guys. because wifi & microphone worked for me.
i can't try it again, because im on CyanogenMod 7 now.
Click to expand...
Click to collapse
WOW ! you're on CM7 , is it Neopeek next build? how it look? any problem with it? will it release soon? I'm waiting for this build ^^!
yes, its neopeek's test build. check this and read more: http://www.neopeek.com/viewtopic.php?f=24&t=6495
he did it again
Well not all the X1s are same. So what one person experiences the other will have an opposite experience. No ROM has worked for me out of the box yet. It is always freezing. But I have fiddled around with using different kernels with different ROMs interchanging them and trying to see which would atleast give me a non freezing X1. Uptil now i have been successful twice.
1) X1 worked perfectly with the only problem with battery consumption.
2) Everything works perfectly but no wifi (which is all I need).

CWM Builder

Would this allow us to get the latest CWM, even CWM Touch on our Nooks?
http://builder.clockworkmod.com/
Looks to be fairly easy to use... would be interesting to see if it works for us, and appears with CM 9/10 or PA running ICS we could even have CWM Touch.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
biohazrd51 said:
Click to expand...
Click to collapse
LMAO nice
Quantumrabbit said:
Would this allow us to get the latest CWM, even CWM Touch on our Nooks?
http://builder.clockworkmod.com/
Looks to be fairly easy to use... would be interesting to see if it works for us, and appears with CM 9/10 or PA running ICS we could even have CWM Touch.
Click to expand...
Click to collapse
Encore is already under existing devices, so I'd say yes.
cybertimber2007 said:
Encore is already under existing devices, so I'd say yes.
Click to expand...
Click to collapse
Blocked at work. I'll have to try when I get home.
I'm in the hospital right now. I'm gonna take a look at this once I get home.
Sent from my BlackBerry 9700 using Tapatalk
I Can Has Cheezburger?
No. It will fail every time.
Nburnes said:
No. It will fail every time.
Click to expand...
Click to collapse
You are right about the existing device builds... and I'm not sure I know where to get the files to try the custom.
So... do you know what?

[Q] USSD error

Since switching from from phone's original ROM and base band I've been encountering the problem with using USSD codes (e.g. ##21#). The result I always get was MMI error as shown as below.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Does somebody had a rom/bb setting which works?
Sent from my LG-P990 using Tapatalk 2
it may help us alot if you could provide some more info about what rom you chose.
Rom, kernel, BB, RIL
with this we could try to locate possible issues with the phone.
necrowakker said:
it may help us alot if you could provide some more info about what rom you chose.
Rom, kernel, BB, RIL
with this we could try to locate possible issues with the phone.
Click to expand...
Click to collapse
Current setup
ROM: Cm10, nightly 20121211
Kernel: Cm default
Base band: V30a (leaked)
RIL: Cm default
Sent from my Galaxy Nexus using Tapatalk 2
It may have been smarter to ask this question in the User Thread for CM 10, then others with that rom could have tested with you.
try doing a clean flash, without restoring any files.
and see if that makes a difference. also check to see if you actually have a signal.
by ringing your top up service. or sending a text to someone.
it could be the call bug, or something else. i dont believe you need any services running to have ussd to work since its a network service that runs along side your network provider.
you should add this bug to the CM10 User thread anyway. USSD codes are rarely something most folk would test.
let me know if a fresh install works or not, i'll give the new CM10 a go later today after i've finished doing more tests.

[Q] GTA: San Andreas - Black Screen After Launching App

I have an 8.9 WiFi only with the stable CM10.1 rom. (10.1.3?)
I side-loaded SA on it and I always get the black screen after launching on any version of the apk.
I have the .obb files in the correct place, both the main. and the patch. are there, and the main. obb file is ~2gb.
Side-loading usually works with my other apps; I got VC to work.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It's just like this.
Any suggestions?
hi,
if you flash 4.4.2 , tou can lunch it...:good:
abadan said:
hi,
if you flash 4.4.2 , tou can lunch it...:good:
Click to expand...
Click to collapse
Is the 4.4.2 stable enough for daily? I've had problems using one of the nightlies back in CM10.
Buy the app
Sent from my Nexus 5
Maszew said:
Is the 4.4.2 stable enough for daily? I've had problems using one of the nightlies back in CM10.
Click to expand...
Click to collapse
i have omnirom 4.4.2 on my tab and its very very very gooooooooooooooooood....
i suggest you to flash it...
jd1639 said:
Buy the app
Sent from my Nexus 5
Click to expand...
Click to collapse
Lol. Taxes here are waay too high.
abadan said:
i have omnirom 4.4.2 on my tab and its very very very gooooooooooooooooood....
i suggest you to flash it...
Click to expand...
Click to collapse
I'll look into that. Thanks.
Maszew said:
Lol. Taxes here are waay too high.
I'll look into that. Thanks.
Click to expand...
Click to collapse
I will try that rom

Verizon - contacts not receiving my texts

Has anyone else had the issue of people not receiving your texts and/or receiving them out of order? I've been having this issue for awhile and tried updating radios too. I'm running AOSiP 9.1 with hellscore kernel b9-mako on my nexus 6. Today I had Verizon give me a new Sim card and so far all seems good but I'm curious if anyone else had this issue. I might try a new kernel and see if that helps at all. 
Sent from my Nexus 6 using Tapatalk
Anyone have any advice? I'm now on pure nexus rom and still having this issue.
Sent from my Nexus 6 using Tapatalk
NITRO_2 said:
Anyone have any advice? I'm now on pure nexus rom and still having this issue.
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
Nope no issues w/ VZW, I've used every Rom/kernel/radio/bootloader out there. What radio/BL you on?
jawmail said:
Nope no issues w/ VZW, I've used every Rom/kernel/radio/bootloader out there. What radio/BL you on?
Click to expand...
Click to collapse
Here's a screenshot of my phone settings. Things have been good today after I switched to Elite rom, maybe it was just hellscore kernel and/or AOSiP
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my Nexus 6 using Tapatalk

Categories

Resources