Database Develop

How return from TWRP to original recovery NO ROOT

Hello I install TWRP to my Mate S without root,but now I can't update my phone and I can't restore the backup I get. How I go back to the original recovery. The phone is with UL 00 rom.

takisspanos said:
Hello I install TWRP to my Mate S without root,but now I can't update my phone and I can't restore the backup I get. How I go back to the original recovery. The phone is with UL 00 rom.
Click to expand...
Click to collapse
You will need to flash the stock recovery in the same way that you flashed the TWRP recovery. So the way I would do it is connect phone to laptop..then use command
"adb reboot bootloader"
Then when your phone is in bootloader mode and with the stock recovery in the same folder as where fastboot and adb are use the command
"fastboot flash recovery recovery.img"
And replace recovery. img with the name of the recovery u want to flash.
Then reboot and you should be back to stock
I am on L09 but if you want I can upload my recovery
Edit: I found a stock recovery file in a thread, this is the one I used on my L09 - READ THE COMPATABILITY WARNING BEFORE FLASHING AS YOUR OWN RISK
http://forum.xda-developers.com/mate-s/help/stock-rom-t3230051

Thank you, but your recovery is the same with mine UL00 ?

takisspanos said:
Thank you, but your recovery is the same with mine UL00 ?
Click to expand...
Click to collapse
I dont know the answer to that. I updated my post above with a link to L09 recovery
Alternative is you need original stock rom to extract recovery.img from
---------- Post added at 09:29 AM ---------- Previous post was at 09:18 AM ----------
takisspanos said:
Thank you, but your recovery is the same with mine UL00 ?
Click to expand...
Click to collapse
I've just figured out a way to get the recovery for you, if you give me about 1 hour I will extract the recovery.img from UL00 Stock B120 (Lollipop) firmware and upload it

I have the original stock rom from here http://www.needrom.com/download/ascend-mate-s-crr-ul00/ .Now I have to found how extract the recovery.img

Thank you very much.

takisspanos said:
Thank you very much.
Click to expand...
Click to collapse
I'm just downloading the B103 stock ROM.
If you want to try you can see how here
http://forum.xda-developers.com/showthread.php?t=2433454
https://www.youtube.com/watch?v=Z3rw78gAl3k
Make sure the ROM you have is the full ROM and not the update because the update might not contain recovery.img

The B103 is CRR-UL00 . Because i saw CRR-UL00-C00B104-unicom.zip. It is the firt at needrom.com

takisspanos said:
The B103 is CRR-UL00 . Because i saw CRR-UL00-C00B104-unicom.zip. It is the firt at needrom.com
Click to expand...
Click to collapse
I'm struggling to extract the recovery.img - I keep getting a CRC Error.
Is it working for you?

If I install UL00 B144 the latest I found is it posible to return on original recovery ? But I don't know how to install , it is posible with TWRP.

takisspanos said:
If I install UL00 B144 the latest I found is it posible to return on original recovery ? But I don't know how to install , it is posible with TWRP.
Click to expand...
Click to collapse
I dont think you can install without the stock recovery...it doesnt work with TWRP

Hello my friend brumgav I download-- CRR-UL00-C00B104-unicom --. I use the- -HuaweiUpdateExtractor_0.9.9.3-- I found Recovery.img. I have to install it with -Minimal ADB and Fastboot- and I am OK ? I used the -Minimal ADB and Fastboot- for installing the TWRP.

extract the recovery.img from your current update.app. then flash the img-file like you flashed the twrp recovery.

OK I did it
1. I use the- -HuaweiUpdateExtractor_0.9.9.3
2.I found Recovery.img and I flash like the TWRP and everything is OK.
Thanks everybody.

takisspanos said:
OK I did it
1. I use the- -HuaweiUpdateExtractor_0.9.9.3
2.I found Recovery.img and I flash like the TWRP and everything is OK.
Thanks everybody.
Click to expand...
Click to collapse
Well done - Glad it worked

OK I did it
1. I use the- -HuaweiUpdateExtractor_0.9.9.3
2.I found Recovery.img and I flash like the TWRP and everything is OK.
Thanks everybody.

.I have TWRP recovery and phone is not booting....In fastboot mode how to flash stock recovery over FRP lock...???

jigs88 said:
.I have TWRP recovery and phone is not booting....In fastboot mode how to flash stock recovery over FRP lock...???
Click to expand...
Click to collapse
read other threads. FRP Lock => you can´t do sh**

Tuerkay said:
read other threads. FRP Lock => you can´t do sh**
Click to expand...
Click to collapse
Is it possible to unlock FRP via TWRP or adb or bypass

jigs88 said:
Is it possible to unlock FRP via TWRP or adb or bypass
Click to expand...
Click to collapse
you need the working OEM-Unlock option in your settings or an TWRP backup without FRP-lock.
even with TWRP recovery you can´t flash anything with adb/fastboot while your device is FRP Locked.

[Recovery](KENZO)TWRP-COFFACE (3.0.0) No patched boot.img required to flash MIUI roms

Hi All,
You guys must be thinking why i'm sharing this recovery when we already have Official TWRP Recovery
actually this Recovery is Lil bit modified (One of my friend Found it somewhere)
via this Recovery you guys will able to Flash any MIUI Rom without Modifying/Patching Boot.img (I tested it my self)(i flashed miui global stable 7.2.3 and global dev 6.4.28)no patched boot.img required
Note:- I'm Not responsible for any kind Of damage caused to your device
Orignal Link => https://drive.google.com/file/d/0B6zD6Bewl4FmQVJGVVBOdzRmT2M/view
Password to the zip :- www.cofface.com
Instructions to flash
download the zip file (link provided)
extract The TWRP recovery.img (password given)
and flash it via flashify or Fastboot
Fastboot Command "Fastboot flash recovery "image-name.img"
yoo done
BUG:- Its not a major bug its not even a bug(i'm just considering it as a bug) but kinda annoying once you flash this recovery this recovery will change your device name from KENZO to CM_KENZO(this not gonna affect anything) but if you will try flash AOSP v4 or anyother AOSP build that verifies the Product name will give some errors
that "This build is for kenzo devices not for Cm_kenzo device"
Solution :- Open the zip in winrar and edit the updater script just change the Kenzo word with CM_Kenzo and it will work (alot of work to do right)
Another solution (this one is better i guess)
when ever you wanna flash MIUi official firmware flash this reocvery via Flashify.
flash the miui rom...
boot it up again flash the official TWRP recovery(so that you will able to flash other roms)
WARNING:- Dont flash miui rom via official TWRP recovery it will not boot untill you flash the Modify boot.img
Update
Bug fixed ===> "This build is for kenzo devices not for Cm_kenzo device"==>No Error now
Link(bug fixed) => https://drive.google.com/open?id=0B5bSNUUrjm6JQjFhUEkzZXZ2bkk
Credits
Developer :- Cofface
Source :- http://www.miui.com/thread-3941604-1-1.html (orignal thread)
Special Thanks to @Rajdip for solving the bug
pls hit thanks if you guys found it helpful

what about the emmc_appsboot file ? should be remove from official rom ?

What is the zip password?? Can you share some screen shot

Anands3 said:
What is the zip password?? Can you share some screen shot
Click to expand...
Click to collapse
read my post zip password is already provided

wawan20 said:
what about the emmc_appsboot file ? should be remove from official rom ?
Click to expand...
Click to collapse
if your device is unlocked officially then No need to remove EMMC_appsboot file
but if your device is unlocked unofficially then yeah you have to dlt that file otherwise it will relock

Please add credits and source links

Rajdip said:
Please add credits and source links
Click to expand...
Click to collapse
I should have added the credit and sources link
But the thing is Idk who developed this recovery.
one of my friend provided me the link and he just found it randomly
i have only this info

Ashish0077 said:
I should have added the credit and sources link
But the thing is Idk who developed this recovery.
one of my friend provided me the link and he just found it randomly
i have only this info
Click to expand...
Click to collapse
Here's the source http://www.miui.com/thread-3941604-1-1.html
and those who are wondering, It works I tested.
---------- Post added at 05:07 PM ---------- Previous post was at 04:43 PM ----------
Okay I edited cafface TWRP, no more "This build is for kenzo devices not for Cm_kenzo device" error here it is https://drive.google.com/open?id=0B5bSNUUrjm6JQjFhUEkzZXZ2bkk

Rajdip said:
Here's the source http://www.miui.com/thread-3941604-1-1.html
and those who are wondering, It works I tested.
---------- Post added at 05:07 PM ---------- Previous post was at 04:43 PM ----------
Okay I edited cafface TWRP, no more "This build is for kenzo devices not for Cm_kenzo device" error here it is https://drive.google.com/open?id=0B5bSNUUrjm6JQjFhUEkzZXZ2bkk
Click to expand...
Click to collapse
Thanx Alot Bro.....and dude its "COFFACE" not "Cafface" and did you tested your build?? if yes i will add your link in the post and will give you credits
Credits Gives

Ashish0077 said:
Thanx Alot Bro.....and dude its "COFFACE" not "Cafface" and did you tested your build?? if yes i will add your link in the post and will give you credits
Credits Gives
Click to expand...
Click to collapse
Yeah I tested my build.. thanks

will this fix the unofficial bootloader unlock hard brick scenario? since now the phone should boot even if the bootloader gets relocked

Nice work, i will test it. Thx.
Wysłane z mojego Redmi Note 3 przy użyciu Tapatalka

Seems to work, but TWRP is in Chinese?
I used Cofface's abd + fastboot files and replaced cofface_recovery_twrp_kenzo.img with the fixed TWRP.img provided by Rajdip. I get some prompt from what I can tell, but since everything is in Chinese I don't know what to click. I'll try to find a solution and post it here.
Update (Solved):
I still don't know what the first screen message was about, but you can get into the normal TWRP menu by swiping the slider to the right. After that click the second from the bottom button on the right to get into settings. Press the globe-symbol on the upper tab bar. From there you can choose the language you want TWRP to be in.
Update #2:
Works like a charm for me. Just installed SuperSU as well. I'm on Redmi Note 3 SnapDragon with Global Developer ROM 6.4.14 (MIUI7), officially unlocked bootloader. Thank you very much for posting OP!

Immortal68 said:
Seems to work, but TWRP is in Chinese?
I used Cofface's abd + fastboot files and replaced cofface_recovery_twrp_kenzo.img with the fixed TWRP.img provided by Rajdip. I get some prompt from what I can tell, but since everything is in Chinese I don't know what to click. I'll try to find a solution and post it here.
Update (Solved):
I still don't know what the first screen message was about, but you can get into the normal TWRP menu by swiping the slider to the right. After that click the second from the bottom button on the right to get into settings. Press the globe-symbol on the upper tab bar. From there you can choose the language you want TWRP to be in.
Update #2:
Works like a charm for me. Just installed SuperSU as well. I'm on Redmi Note 3 SnapDragon with Global Developer ROM 6.4.14 (MIUI7), officially unlocked bootloader. Thank you very much for posting OP!
Click to expand...
Click to collapse
The first prompt that appears is whether you would like to make TWRP modify system files or keep it read only. In simple words, if you swiping to the right Mi recovery wont replace TWRP when MIUI roms are flashed. If anyone didnt swipe right on the first prompt, just goto mount and unselect the read-only option.

Rajdip said:
The first prompt that appears is whether you would like to make TWRP modify system files or keep it read only. In simple words, if you swiping to the right Mi recovery wont replace TWRP when MIUI roms are flashed. If anyone didnt swipe right on the first prompt, just goto mount and unselect the read-only option.
Click to expand...
Click to collapse
Nice to know. TWRP asked the same thing (again apparently) when I rebooted from menu to system. It also provided the option to install SuperSU (or rather install the SuperSU Installer - whatever that was worth). I'm confirmed rooted now and recovery is still TWRP after many reboots. :good:

But is 3.0.0.0
I don't understand that

meangreenie said:
will this fix the unofficial bootloader unlock hard brick scenario? since now the phone should boot even if the bootloader gets relocked
Click to expand...
Click to collapse
No it will not fix that.... actually the thing Is When we unlock Bootloader with Official method it will not get relock while flashing any rom(via recovery)(miflash can still do that) in unofficial Method we replaces the emmc file with the modified one(and when we flash any official rom this file get replaced as this one is modified and (update. Zip/miuirom.zip) does not verify that emmc and relocks the boot loader....
What This recovery does is...
Miui roms inculde some recovery verification On The first boot
Which means it will replace twrp with the stock miui recovery which will cause bootloop...
For this we need to flash the patched/modified boot.img
But This recovery is Lil modified (it auto patches the boot.img and and our recovery does not get replaced and yoo thats how this recovery successfully flashes miui without a patched boot.img

Immortal68 said:
Seems to work, but TWRP is in Chinese?
I used Cofface's abd + fastboot files and replaced cofface_recovery_twrp_kenzo.img with the fixed TWRP.img provided by Rajdip. I get some prompt from what I can tell, but since everything is in Chinese I don't know what to click. I'll try to find a solution and post it here.
Update (Solved):
I still don't know what the first screen message was about, but you can get into the normal TWRP menu by swiping the slider to the right. After that click the second from the bottom button on the right to get into settings. Press the globe-symbol on the upper tab bar. From there you can choose the language you want TWRP to be in.
Update #2:
Works like a charm for me. Just installed SuperSU as well. I'm on Redmi Note 3 SnapDragon with Global Developer ROM 6.4.14 (MIUI7), officially unlocked bootloader. Thank you very much for posting OP!
Click to expand...
Click to collapse
Mine was in english Only on first Boot too?? But yeah i didnt use fastboot to flash was not in mood to turn on my pc.... I flashed it vai flashify and it the recoverg was in english by default and ymyou can flash it via twrp itself..
Anyways Thnx For Reporting This and giving solution

jujusito said:
But is 3.0.0.0
I don't understand that
Click to expand...
Click to collapse
Does that really matter?? Actually i dint face any problem with this recovery and atleast we can flash Miui roms without patching Boot?? And what you dont uderstand??
Its just an old version of twrp as iwas unablefound any updated one
As soon as i get it i will update here...

can I flash this recovery in current TWRP?
Sent from my kenzo using Tapatalk

[ZE601KL] Official Marshmallow WW_V21.40.1220.1698 ROOT and TWRP install

P/S: Im sorry if im against this XDA or forums rules. Its my first time to post something. If i done something wrong kindly let me know.
Condition: You have Official Marshmallow WW_V21.40.1220.1698 installed on your ZE601KL (I forgot to mention that Im coming from CM13, that makes it need bootloader unlock n root probably?)
TWRP install:
-go into fastboot mode (shut down your phone. press VOL UP + POWER at the same time until it vibrates and release)
-download and install adb (can get it here i guess. credit to @snoop005 )
-download twrp here (credit to maintainer @LuK1337) and put it in the ADB folder
-in ur pc hold shift + right click and click "open command window here" in ADB folder
-type in "fastboot device" and make sure ur device is detected
-type in "fastboot flash recovery recovery.img" (recovery.img must be the same name with the twrp that u hv downloaded eg:fastboot flash recovery twrp-3.0.2-4-Z00T.img )
-type in "fastboot boot recovery.img" (recovery.img must be the same name with the twrp that u hv downloaded eg:fastboot boot twrp-3.0.2-4-Z00T.img )
-look at ur phone and it should be installed
Root install
-download SuperSU (credit to @Chainfire) (thanks to @Cr0ssL1nk for notify me about the updated SuperSU! )
-boot to recovery (shut down your phone. press VOL DOWN + POWER at the same time until it vibrates and release)
-select install and browse for the .zip file location
-wait for the installation done and ure good to go

It works on my ZE601KL!!!
Thank you very much xyexiaoyuer in your first post

I would assume this process is the same for any of the variants for which the bootloader is already unlocked and assuming you use the correct TWRP image.
If nothing else, it should work for any Z00T phone. I'll try it on my ZE551KL tonight.

xyexiaoyuer said:
P/S: Im sorry if im against this XDA or forums rules. Its my first time to post something. If i done something wrong kindly let me know.
Condition: You have Official Marshmallow WW_V21.40.1220.1698 installed on your ZE601KL
TWRP install:
-go into fastboot mode (shut down your phone. press VOL UP + POWER at the same time until it vibrates and release)
-download and install adb (can get it here i guess. credit to @snoop005 )
-download twrp here (credit to maintainer @LuK1337) and put it in the ADB folder
-in ur pc hold shift + right click and click "open command window here" in ADB folder
-type in "fastboot device" and make sure ur device is detected
-type in "fastboot flash recovery recovery.img" (recovery.img must be the same name with the twrp that u hv downloaded eg:fastboot flash recovery twrp-3.0.2-4-Z00T.img )
-type in "fastboot boot recovery.img" (recovery.img must be the same name with the twrp that u hv downloaded eg:fastboot boot twrp-3.0.2-4-Z00T.img )
-look at ur phone and it should be installed
Root install
-download SuperSU ive tested SuperSU Root BETA v2.67.zip credit to them (help me credit them as i dont know who to tag)
-boot to recovery (shut down your phone. press VOL DOWN + POWER at the same time until it vibrates and release)
-select install and browse for the .zip file location
-wait for the installation done and ure good to go
Click to expand...
Click to collapse
On the "fastboot boot recovery.img", I first got it to successfully transfer over something, then the second line said that it failed.
I continually did this and got the same results and my phone continued to say "fastboot" in the corner, so I wasn't sure if anything had happened.
I finally "gave up" and pulled the battery but I booted into the Recovery (Vol down + Power) and found that TWRP actually was installed and from there I flashed over SuperSU and was rooted in minutes.
Great job, and thanks! I may be a bit rusty with all this since this is my first Android device in about 3 years.

Joxefo said:
It works on my ZE601KL!!!
Thank you very much xyexiaoyuer in your first post
Click to expand...
Click to collapse
wooot~ npnp bro..thank god it works for you too!!

rczrider said:
I would assume this process is the same for any of the variants for which the bootloader is already unlocked and assuming you use the correct TWRP image.
If nothing else, it should work for any Z00T phone. I'll try it on my ZE551KL tonight.
Click to expand...
Click to collapse
i forgot to mention the bootloader bro. sorry about that. already edited in my 1st post. So how was ur phone? does the method work on your ZE551KL?

ndh777 said:
On the "fastboot boot recovery.img", I first got it to successfully transfer over something, then the second line said that it failed.
I continually did this and got the same results and my phone continued to say "fastboot" in the corner, so I wasn't sure if anything had happened.
I finally "gave up" and pulled the battery but I booted into the Recovery (Vol down + Power) and found that TWRP actually was installed and from there I flashed over SuperSU and was rooted in minutes.
Great job, and thanks! I may be a bit rusty with all this since this is my first Android device in about 3 years.
Click to expand...
Click to collapse
good to hear that bro!! probably it failed because of bootloader? hv u unlock it before? im sorry didnt mention it on my first post. my bad my bad

Boot twrp, not flash it to root?
Does anyone know if it his possible to just boot twrp from adb/ fasboot( not actually flash it), flash SuperSU to root my device, then reboot to stock to keep stock recovery ? My bootloader is unlocked.

long2ski said:
Does anyone know if it his possible to just boot twrp from adb/ fasboot( not actually flash it), flash SuperSU to root my device, then reboot to stock to keep stock recovery ? My bootloader is unlocked.
Click to expand...
Click to collapse
hi broo..you can always flash stock recovery after u flash superSU using twrp =)

xyexiaoyuer said:
hi broo..you can always flash stock recovery after u flash superSU using twrp =)
Click to expand...
Click to collapse
Thanks, but I am pretty sure Flashing twrp writes over stock recovery and unless someone else has the stock image, you can't get it back. I don't know how to make a backup of stock recovery, that's why I wondered if only booting twrp will work.

long2ski said:
Thanks, but I am pretty sure Flashing twrp writes over stock recovery and unless someone else has the stock image, you can't get it back. I don't know how to make a backup of stock recovery, that's why I wondered if only booting twrp will work.
Click to expand...
Click to collapse
if ure using ze601kl, i think the stock recovery can be downloaded here .. download according to your version of firmware of course =) let me know if its work for you. the last time im coming from cm13 to Lollipop im using recovery from there to write off twrp. hope this helps =)

Thanks, that's a great resource! I kind of hijacked this thread since I have the ze551kl. Even though its a zoot model, I'm reluctant to flash anything that is not the exact model firmware. Will the 601 image work for the 551?

long2ski said:
Thanks, that's a great resource! I kind of hijacked this thread since I have the ze551kl. Even though its a zoot model, I'm reluctant to flash anything that is not the exact model firmware. Will the 601 image work for the 551?
Click to expand...
Click to collapse
i dont think so..better dont as i only tested this with ze601kl =( buttttt the stock recovery for your model probably can be downloaded here not sure it will work though..proceed at ur own risk.
sorry bro if its not being helpful

xyexiaoyuer said:
i forgot to mention the bootloader bro. sorry about that. already edited in my 1st post. So how was ur phone? does the method work on your ZE551KL?
Click to expand...
Click to collapse
Yep, worked fine on the ZE551KL.
long2ski said:
Does anyone know if it his possible to just boot twrp from adb/ fasboot( not actually flash it), flash SuperSU to root my device, then reboot to stock to keep stock recovery ? My bootloader is unlocked.
Click to expand...
Click to collapse
long2ski said:
Thanks, that's a great resource! I kind of hijacked this thread since I have the ze551kl. Even though its a zoot model, I'm reluctant to flash anything that is not the exact model firmware. Will the 601 image work for the 551?
Click to expand...
Click to collapse
You can boot into TWRP without overwriting your stock recovery using:
HTML:
fastboot boot twrp.img
That would allow you to install SuperSU without actually installing TWRP. If you want to replace stock recovery with TWRP, you would use:
HTML:
fastboot flash recovery twrp.img

xyexiaoyuer said:
P/S: Im sorry if im against this XDA or forums rules. Its my first time to post something. If i done something wrong kindly let me know.
Condition: You have Official Marshmallow WW_V21.40.1220.1698 installed on your ZE601KL (I forgot to mention that Im coming from CM13, that makes it need bootloader unlock n root probably?)
TWRP install:
-go into fastboot mode (shut down your phone. press VOL UP + POWER at the same time until it vibrates and release)
-download and install adb (can get it here i guess. credit to @snoop005 )
-download twrp here (credit to maintainer @LuK1337) and put it in the ADB folder
-in ur pc hold shift + right click and click "open command window here" in ADB folder
-type in "fastboot device" and make sure ur device is detected
-type in "fastboot flash recovery recovery.img" (recovery.img must be the same name with the twrp that u hv downloaded eg:fastboot flash recovery twrp-3.0.2-4-Z00T.img )
-type in "fastboot boot recovery.img" (recovery.img must be the same name with the twrp that u hv downloaded eg:fastboot boot twrp-3.0.2-4-Z00T.img )
-look at ur phone and it should be installed
Root install
-download SuperSU ive tested SuperSU Root BETA v2.67.zip credit to them (help me credit them as i dont know who to tag)
-boot to recovery (shut down your phone. press VOL DOWN + POWER at the same time until it vibrates and release)
-select install and browse for the .zip file location
-wait for the installation done and ure good to go
Click to expand...
Click to collapse
Are you sure your phone is truely rooted and that apps needing root really works ?
Because in the official SuperSU page on XDA: http://forum.xda-developers.com/showthread.php?t=1538053 , the developpers says your phone must already be rooted before flashing SuperSU.
Also, change the 2.76 Beta's link you gived for SuperSU in your tutorial to the 2.76 Stable version from my link to the official SuperSU XDA page.

Cr0ssL1nk said:
Are you sure your phone is truely rooted and that apps needing root really works ?
Because in the official SuperSU page on XDA: http://forum.xda-developers.com/showthread.php?t=1538053 , the developpers says your phone must already be rooted before flashing SuperSU.
Also, change the 2.76 Beta's link you gived for SuperSU in your tutorial to the 2.76 Stable version from my link to the official SuperSU XDA page.
Click to expand...
Click to collapse
Welp! now that i check back using "root check" apps it seems that the app hv some trouble to detect whether the phone is rooted. the last time everything was okay except for busybox. Perhaps because i rebooted the device? nvrtheless i will update the link and test the stable supersu given in the link

xyexiaoyuer said:
Welp! now that i check back using "root check" apps it seems that the app hv some trouble to detect whether the phone is rooted. the last time everything was okay except for busybox. Perhaps because i rebooted the device? nvrtheless i will update the link and test the stable supersu given in the link
Click to expand...
Click to collapse
I don't think rebooting caused this.
The thing that makes me worry is that Busybox was not okay the first time you rooted your phone, because it must be one of the first thing that must be ok when you root a phone.
Have you got any updates on your side about making root really working ?

Cr0ssL1nk said:
I don't think rebooting caused this.
The thing that makes me worry is that Busybox was not okay the first time you rooted your phone, because it must be one of the first thing that must be ok when you root a phone.
Have you got any updates on your side about making root really working ?
Click to expand...
Click to collapse
Hi Brooooo, im happy to report that the SuperSU is still intact even if the device has been rebooted several times. thx a lot broooo and busybox is installed correctly toooo. already put thumbnails attachment at the 1st post for proof

xyexiaoyuer said:
Hi Brooooo, im happy to report that the SuperSU is still intact even if the device has been rebooted several times. thx a lot broooo and busybox is installed correctly toooo. already put thumbnails attachment at the 1st post for proof
Click to expand...
Click to collapse
No problem, proofs are just great ! :highfive:
Also, check this post: http://forum.xda-developers.com/showpost.php?p=67978015&postcount=8
Because you also must allow SuperSU in ASUS' Autostart Manager, that may be the problem you also got.
But please remember: Do not post something that seems to work but is not, a Beta or something not stable to other people without a lot of checking first

rczrider said:
Yep, worked fine on the ZE551KL.
You can boot into TWRP without overwriting your stock recovery using:
HTML:
fastboot boot twrp.img
That would allow you to install SuperSU without actually installing TWRP. [/HTML]
Click to expand...
Click to collapse
Thanks to everyone's help and ideas and especially to @rczrider. On my ze551kl, I successfully booted the twrp.img in fastboot, did a backup through twrp, then installed supersu zip, and successfully rooted. No overwrite of stock recovery with all the root privileges. Perfect.

Stock Recovery: Lenovo K4 Note 6.0

Lenovo K4 Note: Rooted
Recovery: TWRP 3.0.2
Android Version: 6.0
Stock Rom
a7010a48_s219_160810_row
I want to encrypt my phone, but when I do it nothing happens. Screen goes black, I waited for 5hrs .. still black screen.
I rebooted normally & saw in settings that device is not encrypted.
I am guessing this is happening because of TWRP.
Can anyone please upload stock recovery for above mentioned Android version?
Thank You.

Trushant said:
Lenovo K4 Note: Rooted
Recovery: TWRP 3.0.2
Android Version: 6.0
Stock Rom
a7010a48_s219_160810_row
I want to encrypt my phone, but when I do it nothing happens. Screen goes black, I waited for 5hrs .. still black screen.
I rebooted normally & saw in settings that device is not encrypted.
I am guessing this is happening because of TWRP.
Can anyone please upload stock recovery for above mentioned Android version?
Thank You.
Click to expand...
Click to collapse
Here you go. hit thanks if helped you.

iamironman91 said:
Here you go. hit thanks if helped you.
Click to expand...
Click to collapse
Hi. Thanks for replying.
I got following error in cmd while flashing:
writing 'recovery'...
FAILED <remote: image is not a boot image>
finished.

What's the code you put in adb
fastboot flash recovery recovery.img
Is this you used?

iamironman91 said:
What's the code you put in adb
fastboot flash recovery recovery.img
Is this you used?
Click to expand...
Click to collapse
Yes

Trushant said:
Yes
Click to expand...
Click to collapse
try this

iamironman91 said:
try this
Click to expand...
Click to collapse
Not working... same error.

Enable us debugging. Paste these codes in adb
fastboot erase recovery
fastboot flash recovery recovery.img
Let me know if works
---------- Post added at 06:55 PM ---------- Previous post was at 06:54 PM ----------
Before that backup everything if something goes wrong

iamironman91 said:
Enable us debugging. Paste these codes in adb
fastboot erase recovery
fastboot flash recovery recovery.img
Let me know if works
---------- Post added at 06:55 PM ---------- Previous post was at 06:54 PM ----------
Before that backup everything if something goes wrong
Click to expand...
Click to collapse
Same error.
The problem is with the recovery image.
Thank you for trying to help me.
Any senior member out there? Your assistance will be very much appreciated.

:good:
These imgs are from ota of s219, s208, s147 Lollipop.
Or may be you try downloading stock firmware and flash only recovery img via sp tools.
Ofcourse any senior member will have easiest solution

iamironman91 said:
:good:
These imgs are from ota of s219, s208, s147 Lollipop.
Or may be you try downloading stock firmware and flash only recovery img via sp tools.
Ofcourse any senior member will have easiest solution
Click to expand...
Click to collapse
I tried to flash only recovery via SP Tools but it sent my phone in boot loop, had to flash whole rom to get it working again.

Trushant said:
I tried to flash only recovery via SP Tools but it sent my phone in boot loop, had to flash whole rom to get it working again.
Click to expand...
Click to collapse
Flash is ok? What android_n_setup.zip version you have?after flashing,you can boot to stock?i think note the twrp causing this..

i want stock recovery s232

can i delete TWRP after installed

Telegram link for Lenovo k4 note plzz

@k4note

iamironman91 said:
:good:
These imgs are from ota of s219, s208, s147 Lollipop.
Or may be you try downloading stock firmware and flash only recovery img via sp tools.
Ofcourse any senior member will have easiest solution
Click to expand...
Click to collapse
Bro, just ask him to unzip "recovery.zip" and then use the "recovery.img" for flashing!
Simple thing, yet eazy to miss.

Stock system and vendor partitions with FACE Unlock (Indian Version)

Assalamu alaikum people,
Presenting you with the stock ROM system.img for our Honor 9 Lite. I received my phone yesterday i.e. on 22ndMarch'18 so, this ROM is the latest preloaded ROM you can find. I have ordered the device from India so the ROM is Indian version. I don't know if the international version is any different or not. This system.img has the face unlock feature. The ROM is pre-rooted using Magisk but you know that Magisk is system-less root. So, I don't think the root still persists. It is untouched stock so expect all the bloatware to still be there.
And some people are telling me that Face unlock does not work. Try flashing vendor partition too. That might bring face unlock
Instructions to flash the ROM
I tried fastboot flash but it did not work for me. It showed up a weird error. When I did twrp flash, it works. So,
Put the system.img into your SDcard
Reboot into twrp
Choose Install
Select the "Select Image"
Select system.img
Choose to flash to system partition
Reboot. Enjoy
LInks
System image
https://drive.google.com/file/d/1h_Doj7XfC6-LT3zTAxjcGhuo-9qGg1mL/view?usp=sharing
Vendor image
https://www.androidfilehost.com/?fid=818070582850504951

This system.img works fine. Thanks @aveemashfaq

Which version and build number??

Hi, can I flash it via fastboot ?
Idon't have twrp.

aveemashfaq said:
Assalamu alaikum people,
Presenting you with the stock ROM system.img for our Honor 9 Lite. I received my phone yesterday i.e. on 22ndMarch'18 so, this ROM is the latest preloaded ROM you can find. I have ordered the device from India so the ROM is Indian version. I don't know if the international version is any different or not. This system.img has the face unlock feature. The ROM is pre-rooted using Magisk but you know that Magisk is system-less root. So, I don't think the root still persists. It is untouched stock so expect all the bloatware to still be there.
Instructions to flash the ROM
I tried fastboot flash but it did not work for me. It showed up a weird error. When I did twrp flash, it works. So,
Put the system.img into your SDcard
Reboot into twrp
Choose Install
Select the "Select Image"
Select system.img
Choose to flash to system partition
Reboot. Enjoy
Please someone download and flash and verify it works. It works for me but I am not sure whether it uploaded completely or not. If it is broken, I will re-upload tomorrow.
LInks
https://drive.google.com/file/d/1h_Doj7XfC6-LT3zTAxjcGhuo-9qGg1mL/view?usp=sharing
Click to expand...
Click to collapse
Pl brief the process followed for rooting with magisk.
Thanking you.

excelly2k1 said:
Pl brief the process followed for rooting with magisk.
Thanking you.
Click to expand...
Click to collapse
Here you have Video Tutorial for rooting Honor 9 Lite https://forum.xda-developers.com/9-lite/how-to/unlock-bootloader-honor-9-lite-video-t3760243

aveemashfaq said:
Assalamu alaikum people,
Presenting you with the stock ROM system.img for our Honor 9 Lite. I received my phone yesterday i.e. on 22ndMarch'18 so, this ROM is the latest preloaded ROM you can find. I have ordered the device from India so the ROM is Indian version. I don't know if the international version is any different or not. This system.img has the face unlock feature. The ROM is pre-rooted using Magisk but you know that Magisk is system-less root. So, I don't think the root still persists. It is untouched stock so expect all the bloatware to still be there.
Instructions to flash the ROM
I tried fastboot flash but it did not work for me. It showed up a weird error. When I did twrp flash, it works. So,
Put the system.img into your SDcard
Reboot into twrp
Choose Install
Select the "Select Image"
Select system.img
Choose to flash to system partition
Reboot. Enjoy
Please someone download and flash and verify it works. It works for me but I am not sure whether it uploaded completely or not. If it is broken, I will re-upload tomorrow.
LInks
https://drive.google.com/file/d/1h_Doj7XfC6-LT3zTAxjcGhuo-9qGg1mL/view?usp=sharing
Click to expand...
Click to collapse
Dear @aveemashfaq,
You might be extracted the system.img after installing the custom recovery which implies that the system.img is not having the stock recovery with in it. Pl correct me if i am wrong.
Thanking you.

excelly2k1 said:
Dear @aveemashfaq,
You might be extracted the system.img after installing the custom recovery which implies that the system.img is not having the stock recovery with in it. Pl correct me if i am wrong.
Thanking you.
Click to expand...
Click to collapse
No. system.img is a different partition. It does not include any recovery. Neither stock nor twrp. Your recovery has the partition of recovery_ramdisk.

Dear @aveemashfaq,
Thank you for the clarification. Can i have the stock recovery then?
Thanking you.

Thanks
Thanks for sharing vender image file ? I have formatted my vender image.. flashed .. it cured my phone. :laugh:

Can You Please Compress The File In Zip Or Rar . This File Is Very Big .

I have flashed treble rom and now i have to go back to stock so what should i do
should i flash only system image or both system and vendor????
plz help

[email protected] said:
I have flashed treble rom and now i have to go back to stock so what should i do
should i flash only system image or both system and vendor????
plz help
Click to expand...
Click to collapse
U have to flash both

I downloaded System. img and flashed, it's working great. I flash to System image, not system partition.
What is Vendor image?? Do I need to flash that also?? If yes what to select in Flash to......??
Btw Themes are not working everything else is working great. I flash Magisk 16.0 to have root access.
Can anyone tell me how themes will work??

I flashed Vendor.img to vendor image and now My phone is not starting. I repeated the same step (flashing system.img) but still my phone is not starting.
please tell how to flash correcting, write now my phone is in dead condition.
---------- Post added at 02:03 PM ---------- Previous post was at 01:35 PM ----------
Oushal kDee said:
Thanks for sharing vender image file I have formatted my vender image.. flashed .. it cured my phone. :laugh:
Click to expand...
Click to collapse
Can you please tell me step wise how to flash system.img and vendor.img.
I have twrp installed.
thanks

flash completed
sir flash completed but phone not starting

Stock Recovery and Boot Image
Can you please give me stock recovery and boot image file?
I badly need this. I can not download the whole ROM.. Plzzzzzz............:crying::crying::crying:

After flashing the abv system img & vendor partion.. phn will be wakeup bt Mobile signal,wifi,bluetooth are not working..
---------- Post added at 08:17 AM ---------- Previous post was at 08:16 AM ----------
aveemashfaq said:
Assalamu alaikum people,
Presenting you with the stock ROM system.img for our Honor 9 Lite. I received my phone yesterday i.e. on 22ndMarch'18 so, this ROM is the latest preloaded ROM you can find. I have ordered the device from India so the ROM is Indian version. I don't know if the international version is any different or not. This system.img has the face unlock feature. The ROM is pre-rooted using Magisk but you know that Magisk is system-less root. So, I don't think the root still persists. It is untouched stock so expect all the bloatware to still be there.
And some people are telling me that Face unlock does not work. Try flashing vendor partition too. That might bring face unlock
Instructions to flash the ROM
I tried fastboot flash but it did not work for me. It showed up a weird error. When I did twrp flash, it works. So,
Put the system.img into your SDcard
Reboot into twrp
Choose Install
Select the "Select Image"
Select system.img
Choose to flash to system partition
Reboot. Enjoy
LInks
System image
https://drive.google.com/file/d/1h_Doj7XfC6-LT3zTAxjcGhuo-9qGg1mL/view?usp=sharing
Vendor image
https://www.androidfilehost.com/?fid=818070582850504951
Click to expand...
Click to collapse
After flashing the abv system img & vendor partion.. phn will be wakeup bt Mobile signal,wifi,bluetooth are not working..