Q&A for [DEV][ROM][4.4]Cyanogenmod 11[WIP][ALPHA-2]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [DEV][ROM][4.4]Cyanogenmod 11[WIP][ALPHA-2]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
saeed_sofi said:
can this rom be installed on gt-s5570i?
Click to expand...
Click to collapse
hello is there made any kitkat firmware for galaxy mini without any bugs I mean is there any firmware for daily use?
Any way to back to stock rom by CMW?
Or another solution? I have problem with video codecs, every video player crash.
my android version 4.1.1. how to update into 4.4.4? i have been try to update trough recovery mode, install zip from sdcard, but its failed. i can't update cwm too,,, helpme please,,,,
Few CM 11 questions
Hello, I've used my Galaxy Mini for more than 4 years, but I hadn't known, that it could run also another OS than the default one pre-installed by Samsung. But suddenly, I've found CM and this forum about it. I've made some research, but because I'm beginner with CM, I have few questions:
1. In the description on the thread for the CM 11 for Galaxy Mini there is written, that the development is currently in the testing/alpha2 state. There is also a wishlist of missing features. But the there is also written, that the last update was in January, 2014. If I compare it to Androidarmv6 download archive and its GitHub repository, is seems there already are newer versions out. My first question is, if the most recent version of CM 11 for Galaxy Mini is more stable than that 1 year old alpha2 release? Which missing features from that wishlist have been already resolved?
2. And if the CM 11 version is not stable enough for everyday use, which older (but still based on Android 4.x) and more stable CM version would you recommend me to use instead (if any - otherwise I'll install official CM 7.2)?
3. I noticed, that there is already the official alpha release of CM 12 (based on Android 5.x) and also ported as a new branch on GitHub. I also know, that Android 5.x is really hardware-demanding. Will it be still possible to run CM 12 on Galaxy Mini phone? And what about CM 11 or 10? Could you recommend me the most stable and the newest one (see 2nd question), but still working on so low-performance device as Galaxy Mini in default is (384 MB RAM, 600 MHz, ...)? And if not, could you recommend me some web article describing how to make the performance of my phone better in order to run that recommended CM version from my previous two questions (if it is possible somehow)?
4. And finally, I want to ask, if I need to root my device before installation of that recommended CM version. Because in the installation manual from the original Samsung firmware to the official CM 7.2 there is no need to root Galaxy Mini during process and in the installation manual from CM 7.2 to CM 11 too. But in the installation manual from the original Samsung firmware directly to the CM 11 there is rooted phone needed. I don't understand, why I don't need rooted phone for indirect installation, but for direct installation I do. Could you clarify me the installation process?
I hope somebody experienced helps the beginner there (but good programmer and advanced Linux user) with the installation of CM by answering these a little bit complicated questions
aleskva said:
Hello, I've used my Galaxy Mini for more than 4 years, but I hadn't known, that it could run also another OS than the default one pre-installed by Samsung. But suddenly, I've found CM and this forum about it. I've made some research, but because I'm beginner with CM, I have few questions:
1. In the description on the thread for the CM 11 for Galaxy Mini there is written, that the development is currently in the testing/alpha2 state. There is also a wishlist of missing features. But the there is also written, that the last update was in January, 2014. If I compare it to Androidarmv6 download archive and its GitHub repository, is seems there already are newer versions out. My first question is, if the most recent version of CM 11 for Galaxy Mini is more stable than that 1 year old alpha2 release? Which missing features from that wishlist have been already resolved?
2. And if the CM 11 version is not stable enough for everyday use, which older (but still based on Android 4.x) and more stable CM version would you recommend me to use instead (if any - otherwise I'll install official CM 7.2)?
3. I noticed, that there is already the official alpha release of CM 12 (based on Android 5.x) and also ported as a new branch on GitHub. I also know, that Android 5.x is really hardware-demanding. Will it be still possible to run CM 12 on Galaxy Mini phone? And what about CM 11 or 10? Could you recommend me the most stable and the newest one (see 2nd question), but still working on so low-performance device as Galaxy Mini in default is (384 MB RAM, 600 MHz, ...)? And if not, could you recommend me some web article describing how to make the performance of my phone better in order to run that recommended CM version from my previous two questions (if it is possible somehow)?
4. And finally, I want to ask, if I need to root my device before installation of that recommended CM version. Because in the installation manual from the original Samsung firmware to the official CM 7.2 there is no need to root Galaxy Mini during process and in the installation manual from CM 7.2 to CM 11 too. But in the installation manual from the original Samsung firmware directly to the CM 11 there is rooted phone needed. I don't understand, why I don't need rooted phone for indirect installation, but for direct installation I do. Could you clarify me the installation process?
I hope somebody experienced helps the beginner there (but good programmer and advanced Linux user) with the installation of CM by answering these a little bit complicated questions
Click to expand...
Click to collapse
Are you sure your device is galaxy mini/pop s5570? There is no "i" at end? If both yes, then go ahead and read my answers.
Answers:
1. The op(member of androidarmv6 group) isn't active. Thats why the thread says alpha. But you can download and install latest tass(galaxy mini) version from androidarmv6 jenkins. And about feature list, everything is fixed from that list, but camera is colorless(black and white type pics). You need tls enabled recovery to flash latest cm11.
2. Cm11 is stable enough for daily usage. But cm11 is resource hungry. I would recommend you to try cm11 and make your own decision about it. Every android version <= 4.2.2 are fully stable and everything works. I use aokp 4.1.2 myself. 4.2.2 is a bit heavy but if you don't use too many apps, you could use it without any problems. Cm9, ics aosp, cm10,slimbean,aokp jb4.1.2 roms are most efficient 4.x roms and less resource hungry. For better results and good performance, you may need to install greenify. See my threads for 4.x roms.
3. Cm12 isn't booting yet. You can follow review.androidarmv6.org for latest changes and progress. Better use aokp 4.1.2 or slimbean or cm10 with greenify and int2ext(to expand internal memory, you need to create 512mb ext4 partition on sdcard).
4. It is not that hard to flash a simple zip. There is a thread here in galaxy mini section which describes how to root galaxy mini. Follow that tutorial. Then flash cwm 5.0.2.8 recovery(search in and download from galaxy mini section) it from stock rom recovery.
Then you are ready to install any galaxy mini roms.
Caution: Don't flash any zips outside galaxy mini section. Our device board name is "tass". So, you'll see tass in filenames and they are for galaxy mini/pop s5570. If you flash wrong zips, you'll end up with bricked phones(a paper weight). So, be careful. Have a happy flashing.
Sent from my GT-S5570 using XDA Free mobile app
Thank you! And one more question below
Venkatesh said:
Are you sure your device is galaxy mini/pop s5570? There is no "i" at end? If both yes, then go ahead and read my answers.
Caution: Don't flash any zips outside galaxy mini section. Our device board name is "tass". So, you'll see tass in filenames and they are for galaxy mini/pop s5570. If you flash wrong zips, you'll end up with bricked phones(a paper weight). So, be careful.
Click to expand...
Click to collapse
Sure! Just S5570 without "i" and just Tass! I know it is older mobile phone, but still I don't want little unusable brick
Venkatesh said:
But you can download and install latest tass(galaxy mini) version from androidarmv6 jenkins. And about feature list, everything is fixed from that list, but camera is colorless(black and white type pics). You need tls enabled recovery to flash latest cm11.
Click to expand...
Click to collapse
Is jenkins the download.androidarmv6.com site? Or jenkins.androidarmv6.com? But on the second site I don't see download link, even if I login with my GitHub account. And what is tls enabled recovery? Does it mean using CWM recovery? Or am I wrong?
Venkatesh said:
I would recommend you to try cm11 and make your own decision about it.
Click to expand...
Click to collapse
I'll try and I'll see
Venkatesh said:
There is a thread here in galaxy mini section which describes how to root galaxy mini. Follow that tutorial.
Click to expand...
Click to collapse
So I need to root my phone before. I wasn't sure, but now I understand clearly.
Venkatesh said:
Have a happy flashing.
Click to expand...
Click to collapse
Thank you for your answers to my questions! Actually many thanks!
And finally one more question:
I've seen more threads about Galaxy Mini roms in this xda section. And in almost all of them is written, that everything works, just there are problems using camera. It looks like this is a global problem. Is this problem only in CM 11 at the moment and group members only aren't active to cross the camera out from the "Don't work" list on threads for roms, which were resolved? Or is it still global problem? In which roms camera fully work without any caveat? You wrote, that everything in Galaxy Mini section <=4.2.2 is fully stable, so I expect it works there, but better to ask...
aleskva said:
Sure! Just S5570 without "i" and just Tass! I know it is older mobile phone, but still I don't want little unusable brick
Is jenkins the download.androidarmv6.com site? Or jenkins.androidarmv6.com? But on the second site I don't see download link, even if I login with my GitHub account. And what is tls enabled recovery? Does it mean using CWM recovery? Or am I wrong?
I'll try and I'll see
So I need to root my phone before. I wasn't sure, but now I understand clearly.
Thank you for your answers to my questions! Actually many thanks!
And finally one more question:
I've seen more threads about Galaxy Mini roms in this xda section. And in almost all of them is written, that everything works, just there are problems using camera. It looks like this is a global problem. Is this problem only in CM 11 at the moment and group members only aren't active to cross the camera out from the "Don't work" list on threads for roms, which were resolved? Or is it still global problem? In which roms camera fully work without any caveat? You wrote, that everything in Galaxy Mini section <=4.2.2 is fully stable, so I expect it works there, but better to ask...
Click to expand...
Click to collapse
Search androidarmv6 jenkins in google.
Camera in cm11 actually works but it uses source built libcamera, not the original samsung libcamera. And it gives a very colorless pics. No, androidarmv6 people are very nice. Just they are busy. And we don't have a skillful developer left.
And yes, every version <= 4.2.2 has got everything working as it should. But the video recording isn't good sometimes(only sometimes, it is not good anyways).
I would recommend you to try my aokp 4.1.2. Partition your sd card, install cronmod int2ext to expand ur internal memory (int2ext only not int2ext+). And install xposed installer + greenify, greenify not so important and ram consuming apps. That's my setup actually.
Good night
Sent from my GT-S5570 using XDA Free mobile app
Venkatesh said:
Search androidarmv6 jenkins in google.
Camera in cm11 actually works but it uses source built libcamera, not the original samsung libcamera. And it gives a very colorless pics. No, androidarmv6 people are very nice. Just they are busy. And we don't have a skillful developer left.
And yes, every version <= 4.2.2 has got everything working as it should. But the video recording isn't good sometimes(only sometimes, it is not good anyways).
I would recommend you to try my aokp 4.1.2. Partition your sd card, install cronmod int2ext to expand ur internal memory (int2ext only not int2ext+). And install xposed installer + greenify, greenify not so important and ram consuming apps. That's my setup actually.
Good night
Sent from my GT-S5570 using XDA Free mobile app
Click to expand...
Click to collapse
Okay, I'll try next week and we'll see
well done
My experiences and impressions
Venkatesh said:
Search androidarmv6 jenkins in google.
Camera in cm11 actually works but it uses source built libcamera, not the original samsung libcamera. And it gives a very colorless pics. No, androidarmv6 people are very nice. Just they are busy. And we don't have a skillful developer left.
And yes, every version <= 4.2.2 has got everything working as it should. But the video recording isn't good sometimes(only sometimes, it is not good anyways).
I would recommend you to try my aokp 4.1.2. Partition your sd card, install cronmod int2ext to expand ur internal memory (int2ext only not int2ext+). And install xposed installer + greenify, greenify not so important and ram consuming apps. That's my setup actually.
Good night
Sent from my GT-S5570 using XDA Free mobile app
Click to expand...
Click to collapse
I haven't time before, so today I managed to install a new ROM to my Mini six months after I wrote here. First of all I spent hours of googling and searching, where to download working package to root my phone and where to download cwm 5.0.2.8 for Mini, because all of the packages for rooting haven't been working at all and all of the download links to cwm 5.0.2.8 I've found were dead, except the links and except the packages here. Googling and searching finally helped, so I had my first cwm on my Mini. Then I've checked first three ROMs from the Mini's section. Concretely CM 10, SB 3.1.0 and AOKP JB 4.1.2.
First of all I've tried Slimbean. I was really confused, when I found out, that there is no keyboard inside the installation! What the h*** (sorry, but I really said that when at that moment)? One of my reasons to leave original Gingerbread was that really bad keyboard, which I need to reinstall by some from Google Play every time I had to reset my phone into factory settings (another reason to upgrade btw). And after upgrade again? But Slimbean looked really well, just a few strings weren't translated to my language, so I decided to try AOKP. AOKP hadn't just keyboard, but also gapps, so I needed to google, where to download it from. I've found this and hoped it can't break my newly installed ROM. And there were more strings untranslated to my language, so I decided to try the third one, CM. It was fully translated, but also there weren't gapps and keyboard. And the patch (if it was a patch) - tether patches.zip - couldn't be applied (some error was thrown during its installation).
Finally, I've found gapps for it too. The winner of these three was Slimbean, the loser was AOKP, but I'm going to test more ROMs, until I find some good one. In order to avoid searching the Mini's section another hours: Is there any ROM with preinstalled keyboard (and possibly gapps too)?
aleskva said:
I haven't time before, so today I managed to install a new ROM to my Mini six months after I wrote here. First of all I spent hours of googling and searching, where to download working package to root my phone and where to download cwm 5.0.2.8 for Mini, because all of the packages for rooting haven't been working at all and all of the download links to cwm 5.0.2.8 I've found were dead, except the links and except the packages here. Googling and searching finally helped, so I had my first cwm on my Mini. Then I've checked first three ROMs from the Mini's section. Concretely CM 10, SB 3.1.0 and AOKP JB 4.1.2.
First of all I've tried Slimbean. I was really confused, when I found out, that there is no keyboard inside the installation! What the h*** (sorry, but I really said that when at that moment)? One of my reasons to leave original Gingerbread was that really bad keyboard, which I need to reinstall by some from Google Play every time I had to reset my phone into factory settings (another reason to upgrade btw). And after upgrade again? But Slimbean looked really well, just a few strings weren't translated to my language, so I decided to try AOKP. AOKP hadn't just keyboard, but also gapps, so I needed to google, where to download it from. I've found this and hoped it can't break my newly installed ROM. And there were more strings untranslated to my language, so I decided to try the third one, CM. It was fully translated, but also there weren't gapps and keyboard. And the patch (if it was a patch) - tether patches.zip - couldn't be applied (some error was thrown during its installation).
Finally, I've found gapps for it too. The winner of these three was Slimbean, the loser was AOKP, but I'm going to test more ROMs, until I find some good one. In order to avoid searching the Mini's section another hours: Is there any ROM with preinstalled keyboard (and possibly gapps too)?
Click to expand...
Click to collapse
I've removed keyboard and gapps intensionally. I use this keyboard. If you really want jb keyboard i'll provide you later(is not better than gb keyboard though). Yourzgapps are best. Google search yourzgapps.
Venkatesh said:
I've removed keyboard and gapps intensionally. I use this keyboard. If you really want jb keyboard i'll provide you later(is not better than gb keyboard though). Yourzgapps are best. Google search yourzgapps.
Click to expand...
Click to collapse
I used this one. Its dev developed JB keyboard too, but it wasn't compatible with GB anymore. Is there any package for this or JB one or I need to install them from Google Play?
I found out that AOKP just needed to restart to be fully translated, so it is a little bit ok than CM (but SB still wins).
I'd like to try some 4.0 ROMs and some 4.2 ROMs (just to try, like yesterday). I saw here some threads about english only ROMs. I'll try them and maybe find my favourite. Is there any chance to build my language version after that? I know there is big red notification This is english only! (You have been warned...!). I don't want to waste your time for so minor things. Feel free to reject my potential request at the beginning.
aleskva said:
I used this one. Its dev developed JB keyboard too, but it wasn't compatible with GB anymore. Is there any package for this or JB one or I need to install them from Google Play?
I found out that AOKP just needed to restart to be fully translated, so it is a little bit ok than CM (but SB still wins).
I'd like to try some 4.0 ROMs and some 4.2 ROMs (just to try, like yesterday). I saw here some threads about english only ROMs. I'll try them and maybe find my favourite. Is there any chance to build my language version after that? I know there is big red notification This is english only! (You have been warned...!). I don't want to waste your time for so minor things. Feel free to reject my potential request at the beginning.
Click to expand...
Click to collapse
You can add your language translations to apks inside the rom. ics,jb keyboards won't work on gb. There is a cm10.1 version from androidarmv6 team, try it. It has all languages. To build only your language, then you need to sync sources and modify build files to get your language.
Venkatesh said:
You can add your language translations to apks inside the rom. ics,jb keyboards won't work on gb. There is a cm10.1 version from androidarmv6 team, try it. It has all languages. To build only your language, then you need to sync sources and modify build files to get your language.
Click to expand...
Click to collapse
Thank you, I'll search the CM 10.1 from androidarmv6 team and try it. The keyboard looks like ICS, but worked fine in factory firmware GB. I think it could work in this CM 10.1 too. If I install it from Google Play to the CM 10.1 ROM, it will work, or not? But I don't know, how to change the apk into the zip, that can be installed from cwm.
Thank you for your all help. Six months ago I thought it will be so complicated, but it is easy if one follows the rules not to make a bricked phone.
Edit: I tried this and it is totally awesome. The best I've tried. I'll test it for a longer period. My favourite keyboard is inside, first time in my Mini's life I don't have to reinstall that bad original GB keyboard. I just hope it won't be so battery and RAM consuming (I'll test it). I ask here if I have some question or problem in the future. Last time huge thanks (in words and in thank buttons too)
aleskva said:
Thank you, I'll search the CM 10.1 from androidarmv6 team and try it. The keyboard looks like ICS, but worked fine in factory firmware GB. I think it could work in this CM 10.1 too. If I install it from Google Play to the CM 10.1 ROM, it will work, or not? But I don't know, how to change the apk into the zip, that can be installed from cwm.
Thank you for your all help. Six months ago I thought it will be so complicated, but it is easy if one follows the rules not to make a bricked phone.
Edit: I tried this and it is totally awesome. The best I've tried. I'll test it for a longer period. My favourite keyboard is inside, first time in my Mini's life I don't have to reinstall that bad original GB keyboard. I just hope it won't be so battery and RAM consuming (I'll test it). I ask here if I have some question or problem in the future. Last time huge thanks (in words and in thank buttons too)
Click to expand...
Click to collapse
try cm10.1 rom from here.
Venkatesh said:
try cm10.1 rom from here.
Click to expand...
Click to collapse
I tried it, the performance is better, but there is a huge problem. I install it in this way:
boot into cwm 5.0.2.8 >
wipe data, cache, dalvik cache, battery stats >
flash cm10.1 you suggested >
flash yourzgapps >
flash int2ext >
fotmat sd-ext >
reboot
After reboot cm10.1 boots and at the beginning works like a charm. Int2ext works as expected, 1/5 from memory used. But after 2-3 minutes int2ext stops working and I have full memory. Reboot or int2ext reinstallation don't work. Why? How could I fix it?
aleskva said:
I tried it, the performance is better, but there is a huge problem. I install it in this way:
boot into cwm 5.0.2.8 >
wipe data, cache, dalvik cache, battery stats >
flash cm10.1 you suggested >
flash yourzgapps >
flash int2ext >
fotmat sd-ext >
reboot
After reboot cm10.1 boots and at the beginning works like a charm. Int2ext works as expected, 1/5 from memory used. But after 2-3 minutes int2ext stops working and I have full memory. Reboot or int2ext reinstallation don't work. Why? How could I fix it?
Click to expand...
Click to collapse
Don't format sd-ext after flashing int2ext. One factory reset is enough.
Try this way:
1. Goto recovery and make factory reset/wipe.
2. Flash rom and reboot system(let it boot first).
3. Again goto recovery, mount all partitions and flash int2ext.
4. You can also flash gapps now. Reboot system now, and start your setup.
Venkatesh said:
Don't format sd-ext after flashing int2ext. One factory reset is enough.
Try this way:
1. Goto recovery and make factory reset/wipe.
2. Flash rom and reboot system(let it boot first).
3. Again goto recovery, mount all partitions and flash int2ext.
4. You can also flash gapps now. Reboot system now, and start your setup.
Click to expand...
Click to collapse
I had formatted sd-ext, because it is written in int2ext installation steps. Finally I tried your suggestion and everything works. I just flashed gapps right after flashing OS, because I want Google's first boot guide. I'm so happy everything works like a charm on that older, but good Mini. I'm also happy I got rid of that buggy GB. Once more thanks.
Err
Q&A for [ROM] [14Feb] [Unofficial] AICP - 8.0 - LP 5.0.2_r1 titan - UNIFIED
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM] [14Feb] [Unofficial] AICP - 8.0 - LP 5.0.2_r1 titan - UNIFIED. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Nice Rom but little bugs
Someone who can't connect to a WIFI repeater too?
I can only connect to the Router itself
Great rom btw it really is smoothest out there in my opinion! Will xposed work with this rom atm?
I try many roms, but this is the best. Amazing boot animation and many features.
Any way to increase in-call volume?
How is RAM Management?
anybody know how to fix this, cant connect to wifi, i see its something that android cant get ip? access point is working for other devices
p.s. after long connecting it shows avoided poor internet connection but it isnt poor, and in advanced/ avoid poor connections turned off..
i can't use this rom, because when i call i don't listen nothing! in general is stable rom
Battery draining very quickly
Battery drains to rapidly, please take a look on batter backup..
Otherwise very good rom, great job keep it up..
Battery Draining problem
Battery drains very quickly,any solution for this problem.
otherwise great rom and great work .
keep it up
Running 1068, did clean install.
Bluetooth music working fine, call volume is good.
Like on seemingly all cm12 roms, video playback in browser is not working, absolutely laggy.
Is it possible to remove google search bar from homescreen(s)?
I'm also affected by bluetooth media playback bug, otherwise it's great.
HELP
Hi,
I forgot to do a backup of my rom on the moto g 2014 and i tried to flash AICP - 8.0 - LP 5.0.2_r1 titan - UNIFIED.
The problem is that when i flash it and reboot the device, the rom keeps loading and nothing happens.
I have an XT1068 with TWRP recovery.
I tried to reflash it and it just keeps doing the same.
I don't know what to do now since I don't have other roms and even a back up of the original ROM...
What can I do? I don't have a micro sd card too..
Please help me.
I've tried to sideload but it gives me an error!
dimon5000 said:
the rom keeps loading and nothing happens.
Click to expand...
Click to collapse
If you are coming from another ROM, you have to wipe system, dalvik, cache and data. After that unmount system. Now flash ROM and optional gapps and SuperSU.
P.s. Make sure to use at least twrp 2.8.5.0
doppelhelix said:
If you are coming from another ROM, you have to wipe system, dalvik, cache and data. After that unmount system. Now flash ROM and optional gapps and SuperSU.
P.s. Make sure to use at least twrp 2.8.5.0
Click to expand...
Click to collapse
Unfortunately that didn't help, don't know why. I've installed TWRP 2.8.5.0 and nothing. I obviously did a full wipe (dalvik cache too) and it keeps loading...
I'll try to flash another rom, will see if it's a rom problem or something is wrong with my device.
UPDATE: Tried with another rom, this is the message on TWRP:
***Symlink: no of symlinks failed = 1
E: Error executing updater binary in zip '/sdcard/ROM.zip'
Updating partition details
...done***
UPD2: Installed cyanogenmod 11 succesfully.
Great roms
Very nice job for this rom. I want to report just a minimal problem I have.
I like to charge my phone turned off but when I plug the charger the phone turns on itself. Any fix?
dimon5000 said:
Unfortunately that didn't help, don't know why. I've installed TWRP 2.8.5.0 and nothing. I obviously did a full wipe (dalvik cache too) and it keeps loading...
I'll try to flash another rom, will see if it's a rom problem or something is wrong with my device.
UPDATE: Tried with another rom, this is the message on TWRP:
***Symlink: no of symlinks failed = 1
E: Error executing updater binary in zip '/sdcard/ROM.zip'
Updating partition details
...done***
UPD2: Installed cyanogenmod 11 succesfully.
Click to expand...
Click to collapse
If you come from KitKat you have to install Stock Lollipop or TitanPrime Rom before flashing a CM12 based Rom.
ErichM said:
If you come from KitKat you have to install Stock Lollipop or TitanPrime Rom before flashing a CM12 based Rom.
Click to expand...
Click to collapse
The problem is that the ROM.zip that I was trying to flash was the stock lollipop ROM and it didn't flash (as you can see)
But anyway, after installing the CM11 I tried to flash Quantum LP and all is ok now, the ROM, even if buggy, is working.
Later I'll try to reflash a CM12 based rom and will see if it'll work.
Thanks anyway for help!
You said you flashed AICP - 8.0 - LP 5.0.2_r1 titan - UNIFIED, which is a cm12 based rom and not based on stock lollipop.
If you tried to flash AICP - 8.0 - LP 5.0.2_r1 titan - UNIFIED coming from KitKat, you're bootloop is a known issue, if you tried to flash a stock lollipop Rom, you seem to have a unique problem.
wifi not work
1st of all @kaus , awesome work man !
1st i was using titan prime roms then after some time some cm12 roms with many bugs in it.
Then i tried the cm prime rom , pa , mokee etc .
Then i saw the reviews of your build , so i flashed it
I must tell , none of the roms is fast as your aicp .
The rom is fast , with tons of features , no fC issue
The rom is working great for me
Bug is in Bluetooth , i hope it ll be fixed on your next built !
Guys try this rom , you won't regret it !
Waiting for your next built @kaus.