Related
I tried 6 ways to sunday to update to 6.01 on a shamu nexus 6 to no avail :crying
I am unlocked, no encryption, rooted on MRA58X 6.0.0. When I try to upgrade it just bootloops.
I am fastbooting new MMB29K 6.01 bootloader.img, new radio.img, new system.img, new unencrypted boot.img, and flashing in TWRP SuperSu v2.61 prior to first reboot.
Can someone tell me what is up???? I want to stay encrypted
Thanks, Mark
There is another thread that talks about a particular flashing order. I wonder if that is your problem?
Sent from my Nexus 6 using XDA Free mobile app
Deckard_9732 said:
I tried 6 ways to sunday to update to 6.01 on a shamu nexus 6 to no avail :crying
I am unlocked, no encryption, rooted on MRA58X 6.0.0. When I try to upgrade it just bootloops.
I am fastbooting new MMB29K 6.01 bootloader.img, new radio.img, new system.img, new unencrypted boot.img, and flashing in TWRP SuperSu v2.61 prior to first reboot.
Can someone tell me what is up???? I want to stay encrypted
Thanks, Mark
Click to expand...
Click to collapse
These contradict each other, no?
Out of curiosity, what are you coming from, 6.0? Were you running any ROM of any sort?
Last question...when TWRP is about to reboot and it asks if you want it to install root, you're choosing 'No' right? 2.61 is the system-less root, and if TWRP is trying to flash it's version it'll cause problems.
I know some of these may seem simple and 'duh' moments, but I just spent the past 60 minutes trying to find out why I couldn't update only the radio......it was the radio for the N5, so we've all been there
I'm coming from MRA58X 6.0.0 and no custom rom. I do have the hells core kernal v11 ... and no I select 'No' when rebooting from TWRP to install SuperSu. Shamu Nexus 6 works great with MRA58X 6.0.0 unencrypted and rooted with hells core v11 kernal and SuperSu v2.52. I dont know how to upgrade to 6.0.1 and stay encrypted? hells core has v12 kernal 6.0.1.
Deckard_9732 said:
I'm coming from MRA58X 6.0.0 and no custom rom. I do have the hells core kernal v11 ... and no I select 'No' when rebooting from TWRP to install SuperSu. Shamu Nexus 6 works great with MRA58X 6.0.0 unencrypted and rooted with hells core v11 kernal and SuperSu v2.52. I dont know how to upgrade to 6.0.1 and stay encrypted? hells core has v12 kernal 6.0.1.
Click to expand...
Click to collapse
I haven't been modding my N6 much at all, but I do remember reading something about when using custom kernels. I cannot remember exactly what it was, but there was an issue when you would use a custom kernel then trying to go back to stock.
Did you flash the new custom kernel before you ran into the bootloop? If so, I'd try booting it up bone stock and see if you can get it going that way. Then make one mod at a time and see what's causing the issue.
hayzooos said:
I haven't been modding my N6 much at all, but I do remember reading something about when using custom kernels. I cannot remember exactly what it was, but there was an issue when you would use a custom kernel then trying to go back to stock.
Did you flash the new custom kernel before you ran into the bootloop? If so, I'd try booting it up bone stock and see if you can get it going that way. Then make one mod at a time and see what's causing the issue.
Click to expand...
Click to collapse
That would force encrypt it again.
But the way is to back to stock as much as possible. No root, no custom kernel, factory reset. The only thing needed is a modified stock boot.img with the fstab changed to encryptable.
I have had some issues with my phone since unlocking with sunshine. See separate thread http://forum.xda-developers.com/droid-turbo/help/help-bricked-xt1254-unlocking-to-t3279581 for description. I have a theory about this now and would like some opinions from folks with more experience.
I used device encryption on my Turbo before the OTA update to Lollipop. After encrypting the phone I would be prompted to enter my PIN to decrypt the data partition before the phone would boot, and then I'd have to enter the PIN again after boot to unlock it. After the OTA I no longer had to enter my PIN when booting the phone, but I would still have to enter it after boot to unlock. After the OTA the phone still reported that it was encrypted in the system security settings even though it didn't need a PIN to decrypt at boot time. That makes sense from what little I know because encrypting the device re-writes the data partition, and the OTA didn't touch the data partition and could not un-encrypt it. I was baffled by this, but I didn't want to factory reset and wipe the data partition to let me re-encrypt the phone.
So after the OTA, the data partition of my phone was still encrypted, but magically the phone was able to decrypt data and boot without my PIN. I don't know why. But one clue is that after unlocking and installing TWRP I looked at TWRP log and saw a log message saying something about decrypting with default PIN. Anyway, I never wiped data, but my phone somehow manages to boot. Re-flashing system and recovery caused problems at first, but now it seems to be back to the way it was. I haven't flashed a new ROM yet, but I expect that when I do I'll have to wipe data and that will get everything back to normal.
My question is has anyone else experimented with device encryption and is this behavior expected?
Thanks.
Not having to enter a PIN with the factory image was a bug I initially discovered, and reported, during the *initial* Android L SOAK test. Needless to say, they never fixed the bug (plus one of the Stagefright CVEs) during the second SOAK rollout. I reported it then, too. They did nothing. That second SOAK was the straw that broke the camel's back, for me. I will never participate in another.
As far as this bug goes, what I would do, is an FDR, and re-encrypt your device to wipe the key store and start over.
Sent from my DROID Turbo via Tapatalk. Now with that cyanogenmod goodness.
I got notifications that the SU4TL-49 OTA was ready to install on my phone, and I had read that if you try to install it with anything but stock recovery that you get into a boot loop. I figured it was a matter of time before I ended up accidentally installing the OTA upgrade and so decided to wipe my phone and go back to stock, and I would use that opportunity to re-encrypt the phone. It took me a couple of tries before I discovered that factory reset isn't enough to remove the encryption, and that I had to reformat the data partition. This took a few hours of going back and forth between reverting to stock, upgrading, rooting, configuring and starting over before I finally got it right, but eventually the phone said that it wasn't encrypted and gave me the option to encrypt. What a pain. After setting up all my apps for the third or fourth time I thought I was done. Whenever I rebooted I was prompted for my PIN before android booted. I even had to enter my PIN to run TWRP.
At least that's the way it was for a few hours. Now when I reboot it just starts up android with no password again. All the effort to un-encrypt and re-encrypt seems to have been a waste. Oh well, at least I avoided getting into boot loop hell.
Hopefully this unencrypting without requiring password/PIN thing gets fixed when (if) they come out with M for the turbo.
This just keeps getting better and better. I decided to flash the Unofficial CM13 ROM this afternoon just for fun. I got it all set up when I found that the GPS receiver wasn't working. Searching the thread I found a link to a flash-able radio image to fix that, and when I rebooted to TWRP it prompted me for a password to decrypt the data partition! Unfortunately it didn't like my PIN no matter how many times I entered it. I don't know if there's something about entering a numerical PIN on the qwerty keyboard, but it had worked earlier in the day before it stopped prompting for passwords. After a bunch of tries and reboots I gave up and downloaded a fastboot flashable version of the same. I've spent most of the day screwing around with this phone already and I'm not going to reformat the data partition again today for sure! Maybe it just needs a good night's sleep.
Astrobrewer said:
This just keeps getting better and better. I decided to flash the Unofficial CM13 ROM this afternoon just for fun. I got it all set up when I found that the GPS receiver wasn't working. Searching the thread I found a link to a flash-able radio image to fix that, and when I rebooted to TWRP it prompted me for a password to decrypt the data partition! Unfortunately it didn't like my PIN no matter how many times I entered it. I don't know if there's something about entering a numerical PIN on the qwerty keyboard, but it had worked earlier in the day before it stopped prompting for passwords. After a bunch of tries and reboots I gave up and downloaded a fastboot flashable version of the same. I've spent most of the day screwing around with this phone already and I'm not going to reformat the data partition again today for sure! Maybe it just needs a good night's sleep.
Click to expand...
Click to collapse
Encryption is totally broken on CM13. The issue is that our version of TWRP cannot decrypt it. I contacted the maintainer of TWRP for our device about this issue and he said that he tried to fix the issue, but he failed.
Also, official CM13 has been out for a while now for the Turbo. No need to go with the unofficial version.
Thanks for the info @TheSt33v, but I'm not sure that it's totally broken.
The strange thing is that I was using TWRP 3.0.2 just fine after encrypting phone while on stock ROM, and it worked for a while even after flashing CM13. Then it just stopped liking my PIN. But CM13 takes my PIN and decrypts data just fine. So my phone is usable for now, and the problem of it decrypting without asking for a PIN is solved for now. I just went to cyanogenmod and see that there's a CM13 recovery. Based on your post I'm guessing that's what is broken, so no point in flashing that. Oh well, at least my phone is secure.
Astrobrewer said:
Thanks for the info @TheSt33v, but I'm not sure that it's totally broken.
The strange thing is that I was using TWRP 3.0.2 just fine after encrypting phone while on stock ROM, and it worked for a while even after flashing CM13. Then it just stopped liking my PIN. But CM13 takes my PIN and decrypts data just fine. So my phone is usable for now, and the problem of it decrypting without asking for a PIN is solved for now. I just went to cyanogenmod and see that there's a CM13 recovery. Based on your post I'm guessing that's what is broken, so no point in flashing that. Oh well, at least my phone is secure.
Click to expand...
Click to collapse
Just FYI, our TWRP maintainer has fixed decryption. You can get the latest version here: https://www.androidfilehost.com/?w=files&flid=39562 (version 3.0.2-0 mod 02 as of this writing). I still had trouble decrypting a partition that was previously formatted using the stock recovery menu, but once I formatted the data partition using this version of TWRP and re-encrypted, it decrypted fine.
TheSt33v said:
Just FYI, our TWRP maintainer has fixed decryption...
Click to expand...
Click to collapse
Yes they have fixed it! I found TWRP Mod 2 over the weekend and saw from the change log that decryption was fixed. I flashed it and it works great. No problems decrypting my previously encrypted data partition since I flashed mod 2. The funny thing about it is that basic TWRP 3.0.2 (no mod) worked well enough for long enough for me to flash CM13, and it even seemed to work for a little while after that. But then it decided that it didn't know how to decrypt my phone anymore and I was stuck until Mod 2. I can't explain why it worked for a while and then stopped, but I'm very happy that mod 2 fixed it.
Thanks for your help and support. Sometimes I feel like I'm the only user who encrypts his phone. There don't seem to be a lot of threads about encryption/decryption issues.
Astrobrewer said:
Yes they have fixed it! I found TWRP Mod 2 over the weekend and saw from the change log that decryption was fixed. I flashed it and it works great. No problems decrypting my previously encrypted data partition since I flashed mod 2. The funny thing about it is that basic TWRP 3.0.2 (no mod) worked well enough for long enough for me to flash CM13, and it even seemed to work for a little while after that. But then it decided that it didn't know how to decrypt my phone anymore and I was stuck until Mod 2. I can't explain why it worked for a while and then stopped, but I'm very happy that mod 2 fixed it.
Thanks for your help and support. Sometimes I feel like I'm the only user who encrypts his phone. There don't seem to be a lot of threads about encryption/decryption issues.
Click to expand...
Click to collapse
Most people don't seem to think it's worth the impact that it has on performance.
I was worried about the performance hit too before I tried it. But I don't notice any real difference in performance. Of there is a hit it's too small for me to tell.
Sent from my DROID Turbo using XDA-Developers mobile app
Astrobrewer said:
I was worried about the performance hit too before I tried it. But I don't notice any real difference in performance. Of there is a hit it's too small for me to tell.
Sent from my DROID Turbo using XDA-Developers mobile app
Click to expand...
Click to collapse
This is a very interesting thread. I would like to encrypt so I can setup my work exchange email as its a requirement. Just to clarify what is the order to do this in? Currently I am running RR 6.01 but have run CF's 1.3.6 ROM most of the time as its awesome.
Can I encrypt using RR or do I need to switch back to CFs ROM or to stock Lollipop after installing the upgraded TWRP in place of the standard version I am running now?
thanks for the help and information.
oldidaho said:
This is a very interesting thread. I would like to encrypt so I can setup my work exchange email as its a requirement. Just to clarify what is the order to do this in? Currently I am running RR 6.01 but have run CF's 1.3.6 ROM most of the time as its awesome.
Can I encrypt using RR or do I need to switch back to CFs ROM or to stock Lollipop after installing the upgraded TWRP in place of the standard version I am running now?
thanks for the help and information.
Click to expand...
Click to collapse
You can encrypt on RR. Just make sure you're running TWRP version 3.0.2-0 mod 2: https://www.androidfilehost.com/?w=files&flid=39562
If encryption fails, you'll need to format your data partition (aka do a factory reset) using this version of TWRP. Then it will work.
TheSt33v said:
You can encrypt on RR. Just make sure you're running TWRP version 3.0.2-0 mod 2: https://www.androidfilehost.com/?w=files&flid=39562
If encryption fails, you'll need to format your data partition (aka do a factory reset) using this version of TWRP. Then it will work.
Click to expand...
Click to collapse
thanks so much for the clarification! Being encrypted, how does that affect installing future updates or restores? Can I still flash ROMS and other ZIPS from TWRP the same as now?
oldidaho said:
thanks so much for the clarification! Being encrypted, how does that affect installing future updates or restores? Can I still flash ROMS and other ZIPS from TWRP the same as now?
Click to expand...
Click to collapse
The only difference is that you'll have to enter your password/pin every time you boot twrp. Don't try to use a pattern lock. Everything else will be the same.
TheSt33v said:
The only difference is that you'll have to enter your password/pin every time you boot twrp. Don't try to use a pattern lock. Everything else will be the same.
Click to expand...
Click to collapse
thank you for the help! I was able to encrypt my RR MM install without having to wipe the data partition. It now prompts me to put my PIN in when booting up and when going into the modded version of TWRP. It then is able to decrypt the partition in TWRP so as you said just like before. Only difference is a little longer boot up time. Performance seems the same to me.
oldidaho said:
thank you for the help! I was able to encrypt my RR MM install without having to wipe the data partition. It now prompts me to put my PIN in when booting up and when going into the modded version of TWRP. It then is able to decrypt the partition in TWRP so as you said just like before. Only difference is a little longer boot up time. Performance seems the same to me.
Click to expand...
Click to collapse
Guess I spoke too soon. phone was working fine for a day. Yesterday at work I'm looking at my phone as it reboots on its own (just sitting there). I then get cant decrypt partition message. Cant do anything and it wont boot up into the OS WO giving this error. In TWRP still cant do anything because it cant decript the partition. So I formatted the data partition and started over. I had saved a recent backup to my PC so I was able to get back to that. Now running CFs latest instead of RR. I need my phone, cant take a chance on this happening again as I was instantly dead in the water. Just wont encrypt.
oldidaho said:
This is a very interesting thread. I would like to encrypt so I can setup my work exchange email as its a requirement. Just to clarify what is the order to do this in? Currently I am running RR 6.01 but have run CF's 1.3.6 ROM most of the time as its awesome.
Can I encrypt using RR or do I need to switch back to CFs ROM or to stock Lollipop after installing the upgraded TWRP in place of the standard version I am running now?
thanks for the help and information.
Click to expand...
Click to collapse
oldidaho said:
thank you for the help! I was able to encrypt my RR MM install without having to wipe the data partition. It now prompts me to put my PIN in when booting up and when going into the modded version of TWRP. It then is able to decrypt the partition in TWRP so as you said just like before. Only difference is a little longer boot up time. Performance seems the same to me.
Click to expand...
Click to collapse
oldidaho said:
Guess I spoke too soon. phone was working fine for a day. Yesterday at work I'm looking at my phone as it reboots on its own (just sitting there). I then get cant decrypt partition message. Cant do anything and it wont boot up into the OS WO giving this error. In TWRP still cant do anything because it cant decript the partition. So I formatted the data partition and started over. I had saved a recent backup to my PC so I was able to get back to that. Now running CFs latest instead of RRI need my phone, cant take a chance on this happening again as I was instantly dead in the water. Just wont encrypt.
Click to expand...
Click to collapse
Well, just as you used CM13 Marshmallow and RR Marshmallow just fine without encryption, not sure why you went to CF Lollipop instead of RR just because encryption didn't work. It just seems you were implying it's CM13 or RR at fault when you used them just fine before, and even now on CF you are NOT using encryption.
But it's your phone, so you can run what you want.
I do commend you for having a recent backup on your PC.
ChazzMatt said:
Well, just as you used CM13 and RR just fine without encryption, not sure why you went to CF instead of RR just because encryption didn't work. But it's your phone.
Just not sure why you are implying it's CM13 or RR at fault when you used them just fine before, and even now on CF you are NOT using encryption.
I do commend you for having a recent backup on your PC.
Click to expand...
Click to collapse
I should have clarified, I dont think RR had anything to do with my issue. I actually really liked RR, it has some great features, great performance and good battery life too. I just missed the Moto features in the stock and CFs ROMs.
oldidaho said:
I should have clarified, I dont think RR had anything to do with my issue. I actually really liked RR, it has some great features, great performance and good battery life too. I just missed the Moto features in the stock and CFs ROMs.
Click to expand...
Click to collapse
Strange. I've been using RR M encrypted for several weeks now with no issues. Oh well. If you're happy with modified stock, that's all that matters. You can encrypt that too if you like. I'm a big fan of the Moto features as well, and RR M has basically all of them built in besides Voice (chop chop flashlight was removed for a while, but it has been added back). Although I've never understood what Voice offers that Google Now does not.
Mystery solved!
Astrobrewer said:
... At least that's the way it was for a few hours. Now when I reboot it just starts up android with no password again. All the effort to un-encrypt and re-encrypt seems to have been a waste. Oh well, at least I avoided getting into boot loop hell.
Hopefully this unencrypting without requiring password/PIN thing gets fixed when (if) they come out with M for the turbo.
Click to expand...
Click to collapse
I have been running the CM13 ROM for the past few months and it's been great, but now that Verizon came out with official Marshmallow I decided to go back to a stock-based ROM again because I've been missing VOLTE. So I flashed ComputerFreak274_MM. After flashing and rooting I was back in the stupid state of the phone saying that it was encrypted but booting without a PIN. It seemed unreal that Moto/Verizon would have left this bug in MM too. So I reformatted data, re-flashed and rooted the ROM and tried encrypting. Then I discovered that it won't encrypt if it's rooted. So back to wiping, re-formatting and flashing again, but this time I am able to successfully encrypt before rooting. Success! Now root and start setting up the phone. Now I have to enter my PIN before it will boot into the system or into TWRP. Yay! By now it's 1:00am and I have to be at work early, so I let it sit overnight while my apps download. In the morning I flash SuperSU and notice that I wasn't prompted for a password to decrypt when I booted into TWRP and I wasn't prompted for password when booting system after flashing SuperSU. WTF!!! More time wasted. It seemed that stock ROMs just don't like encryption. :crying:
Anyway, after stewing about it all day I randomly chanced into the solution. In the Security settings menu there's an option under Encryption called "Secure start-up" which only becomes available when phone is encrypted. The Secure start-up options says:
"You can further protect this device by requiring your PIN before it starts up. Until the device starts up, it can't receive calls, messages, or notifications, including alarms. This helps protect data on lost or stolen devices."​Secure start-up defaults to disabled for some reason, and when it's disabled the phone automatically decrypts itself when it boots without requiring PIN entry. So you can encrypt your phone and still be totally unprotected. What a dumb-ass default!
But when I enable Secure start-up then encryption works the way it should -- with phone prompting for PIN before booting. Maybe I just didn't notice it, but I didn't see anything when I encrypted the phone saying to enable Secure start-up to actually protect the phone. I'm guessing that this option was there in Lollipop too; but who knew???
Does anyone know of a stock, un-encrypted, no root, nougat ROM? Tried a few "stock" roms and removed SU within the actual file. But all that does is cause issues. Any ideas?
Factory images of Android 7 were just released and Google makes them readily available to everyone. Download one and flash it using Fastboot. Problem solved.
I misread your post and missed that you were looking for an unencrypted ROM. There isn't one that I'm aware of...yet. Wait a few days and Pure Nexus should be released.
Use the factory image with a custom kernel/modified boot image that doesn't force encryption.
So like ElementalX Kernel. All I would have to do is, flash factory and than ElementalX and I should be ok?
Hey guys, is this a thing yet? Haven't had much luck in my search, might be too early.
The majority of the custom ROMs have been on 7.1.1 for quite some time now, and pretty much all the kernels have been updated to support it. I wouldn't imagine there are any crazy changes in official released 7.1.1 to break compatibility with existing kernels. So pick your poison. My go to is Singularity right now.
edit: unless you mean't the "stock kernel" with no force encryption enabled. In which case just use the FED patcher before you boot, it will unpack the kernel and ram disk, disable dm verity and some other voodoo, and repack the kernel and ramdisk and allow you to boot. I've used it on Marshmallow on CM to try the stock kernel without force encrypting and it worked great. Pretty sure it works for Nougat too but haven't used it in a while.
Dopamin3 said:
The majority of the custom ROMs have been on 7.1.1 for quite some time now, and pretty much all the kernels have been updated to support it. I wouldn't imagine there are any crazy changes in official released 7.1.1 to break compatibility with existing kernels. So pick your poison. My go to is Singularity right now.
edit: unless you mean't the "stock kernel" with no force encryption enabled. In which case just use the FED patcher before you boot, it will unpack the kernel and ram disk, disable dm verity and some other voodoo, and repack the kernel and ramdisk and allow you to boot. I've used it on Marshmallow on CM to try the stock kernel without force encrypting and it worked great. Pretty sure it works for Nougat too but haven't used it in a while.
Click to expand...
Click to collapse
An issue I just came across with custom kernels is that I get no sound whatsoever out of my N6, not even in calls. I tried Elite and ElementalX and both did this. I'm thinking something must have changed in the official 7.1.1 image involving the way it handles sound. Really weird!
H4X0R46 said:
An issue I just came across with custom kernels is that I get no sound whatsoever out of my N6, not even in calls. I tried Elite and ElementalX and both did this. I'm thinking something must have changed in the official 7.1.1 image involving the way it handles sound. Really weird!
Click to expand...
Click to collapse
Thanks for info, and I read fed patcher v8 doesn't work with Nougat but dev working on v9. So for now I guess no kernel that doesn't force encrypt is available.
Dopamin3 said:
Thanks for info, and I read fed patcher v8 doesn't work with Nougat but dev working on v9. So for now I guess no kernel that doesn't force encrypt is available.
Click to expand...
Click to collapse
I ended up using magisk for my issue, it disables dm-verity and turns off forced encryption, hopefully new kernel will be around soon and I have a good feeling they will be!
H4X0R46 said:
Hey guys, is this a thing yet? Haven't had much luck in my search, might be too early.
Click to expand...
Click to collapse
I was curious about this as well since I recently unencrypted my phone. Turns out SuperSU fixes forced encryption so as long as you flash it in your recovery before booting your phone back up you should be good. On 7.1.1 stock at the moment without encryption and all I did was flash the new radio, boot, and system images in Fastboot. I then booted into recovery, flashed SuperSU and rebooted. So far, so good.
Hi guys,
I tried a couple of years ago disabling encryption on my Nexus 6 and the performance was great, but as updates were released it turned out to be a pain to keep up always having to manually update the phone. My nexus 6 now is crawling and I'm thinking about trying to disable encryption. I could not find any sort of reports if it can be done on 7.1.1
Has anyone tried? Is there any guide? Thanks!
Mephisto_POA said:
Hi guys,
I tried a couple of years ago disabling encryption on my Nexus 6 and the performance was great, but as updates were released it turned out to be a pain to keep up always having to manually update the phone. My nexus 6 now is crawling and I'm thinking about trying to disable encryption. I could not find any sort of reports if it can be done on 7.1.1
Has anyone tried? Is there any guide? Thanks!
Click to expand...
Click to collapse
It's no different. If your bootloader is not unlocked, unlocking it will wipe the user data partition. If the bootloader is already unlocked, you'll need to wipe the user data partition.
*IN EITHER CASE YOU WILL LOSE YOUR DATA. DO A BACKUP FIRST
Then flash a ROM with an included kernel that doesn't force encrypt. Or, just flash a kernel that doesn't force encrypt.
Now that I've answered your question, IMHO, it's not worth the effort. If your phone is crawling, do a factory reset. On a stock ROM, go to Settings > Backup & Reset and make sure you have your Google backup settings enabled. Use the Factory Data Reset button to actually reset. READ through the information and confirm. This will cause your phone to reboot with a wiped system partition.
If your on a custom ROM I'm going to assume you know how to wipe through recovery.
ktmom said:
...., IMHO, it's not worth the effort. If your phone is crawling, do a factory reset.....
Click to expand...
Click to collapse
My 7.1.1 uses the lite stock rom of Danvdh.
I think you're right about the hassle. Only decrypting is not enough. But debloating and removing unused stuff and decrypting the data partition did raise performance on my N6.
Yeah, I know it is a bit of a hassle, but considering there will be no more updates after 7.1.1 it should be a once only process right? Is possible to disable encryption on 7.1.1. without rooting?
I'm happy to unlock the bootloader and wipe the phone, not a problem.
Mephisto_POA said:
Yeah, I know it is a bit of a hassle, but considering there will be no more updates....
Click to expand...
Click to collapse
Don;t forget the monthly security updates.
I am using the lite stock room of Danvdh. It's a pre-rooted stock room.
But I think updates can be dirty flashed because the system, radio and bootloader will not change anymore.
So root and install TWRP to flash the updates
the problem with rooting is that many apps will not work, I'm cool staying without root and vanilla android, I just want to get rid of the encryption
Mephisto_POA said:
the problem with rooting is that many apps will not work, I'm cool staying without root and vanilla android, I just want to get rid of the encryption
Click to expand...
Click to collapse
In that case the post of @ktmom is applicable.
I am on 7.1.1 and have used the fed patcher mentioned on this site and it has worked nicely on custom and stock ROMs. But u have to be rooted.
NLBeev said:
In that case the post of @ktmom is applicable.
Click to expand...
Click to collapse
I'm a bit illiterate in this aspect, apologies. but I could not find a vanilla android for nexus 6 with just encryption disabled and no root. I would really appreciate if you could give me some directions?
The NEXUS 6 ANDROID DEVELOPMENT and NEXUS 6 ORIGINAL ANDROID DEVELOPMENT seems both to have only modified versions. I'm a bit confused
Mephisto_POA said:
I'm a bit illiterate in this aspect, apologies. but I could not find a vanilla android for nexus 6 with just encryption disabled and no root. I would really appreciate if you could give me some directions?
The NEXUS 6 ANDROID DEVELOPMENT and NEXUS 6 ORIGINAL ANDROID DEVELOPMENT seems both to have only modified versions. I'm a bit confused
Click to expand...
Click to collapse
Plain vanilla unencrypted would be google factory image plus a non forced enforcing kernel. B14CKB1RD, Franco there are others.
Custom ROM that is close to vanilla but comes with a non forced encrypting kernel would be Pure Nexus.
Mephisto_POA said:
I would really appreciate if you could give me some directions?
Click to expand...
Click to collapse
I have only one direction for you and that's the lite stock rom of Danvdh.
The kernel is the modified part. (no forced encryption).
After flashing this rom, you can unroot by uninstalling supersu.
https://forum.xda-developers.com/showthread.php?p=59561445/
NLBeev said:
I have only one direction for you and that's the lite stock rom of Danvdh.
The kernel is the modified part. (no forced encryption).
After flashing this rom, you can unroot by uninstalling supersu.
https://forum.xda-developers.com/showthread.php?p=59561445/
Click to expand...
Click to collapse
Hi, I also want to remove encryption from my Nexus 6 Stock as it is a stuttering mess.
I have rooted and installed the stock rom of Danvdh, but to my disappointment on boot up the phone is still showing as encrypted.
Have I done something wrong?
saltyzip said:
Hi, I also want to remove encryption from my Nexus 6 Stock as it is a stuttering mess.
I have rooted and installed the stock rom of Danvdh, but to my disappointment on boot up the phone is still showing as encrypted.
Have I done something wrong?
Click to expand...
Click to collapse
That was an answer to a different question.
The ROM you installed I believe has a non-force encrypting kernel. But just installing a non-force encrypting kernel isn't enough. You need to wipe user data and install a kernel that doesn't force encrypt.
Please read back a page to two for the whole recent conversation that has more details, like the fact that you'll lose all of your data in this process.
saltyzip said:
Hi, I also want to remove encryption from my Nexus 6 Stock as it is a stuttering mess.
I have rooted and installed the stock rom of Danvdh, but to my disappointment on boot up the phone is still showing as encrypted.
Have I done something wrong?
Click to expand...
Click to collapse
Got it working, just followed this:
Just because forced encryption is disabled doesn't mean it decrypts you. You have to do that yourself by formatting data either through TWRP (TWRP > Wipe > Format Data button) or through fastboot (fastboot format userdata), which will wipe out your app data and your internal storage partition so make the appropriate backups.
saltyzip said:
Got it working, just followed this:
Click to expand...
Click to collapse
You going to take credit, you should at least use your own words ?
I've gone with your guys suggestion with stock lite, working like a charm, very snappy. The phone feels indeed light, and multitasking is way smoother now, thanks!!!
just on a side note, after you install the rom you need to wipe the data partition to get rid of the encryption
Installed twrp on bn Nexus 6 os 5.1 OTA for 7.1.1 encrypted it
No clue how to fix this I'm a noob unlocked bootloader unencrypted Android 5 then it OTA updated to 7.1.1 and now can't get to twrp to wipe encryption how can I get this going again phones working just can't use cable to computer have the SD card reader micro SD any help would be appreciated
kudabee61 said:
...just can't use cable to computer...
Click to expand...
Click to collapse
Get your phone's USB port fixed, then you can fix the ROM issue.