Related
I've been a lurker for the last few years; never thinking I would need any help or assistance .. but I have a situation ..
My Sprint HTC One was working better than I had ever seen it just last Thursday. I was running CM11, with ART. I had an old version of SuperOne (Sense 5) backed up with TWRP. I thought I'd go ahead and load the backup, and update all the apps and then make another more recent backup before returning to CM11. I got as far holding the power button and selecting recovery. The phone locked up at that point.
It took 10 minutes to get it back to the screen where you can select fastboot, factory reset, etc. Interestingly I couldn't get into TWRP. The screen read "entering recovery" and nothing. It would just hang there.
I read that erasing the cache with fastboot might work, and it did. But when I was able to enter recovery, instead of restoring CM11, I thought, "well, maybe now it'll work", so I just rebooted. Wrong. Wouldn't boot. And, now running fastboot cache erase (or erase cache) doesn't do anything.
Now, by pressing the power button alone and holding it in I'm able to get to the fastboot, factory reset, etc screen. Went to fastboot usb, and fastboot commands work but ADB doesn't detect the device. I can't send ADB commands, but I can send ONE fastboot command. After sending any fastboot command, the phone locks up. Nothing from that point.
I tried installing a RUU. The .exe file detected the version on my phone, and everything went great until the program said it was booting to the bootloader. Locked it up. Nothing from that point.
I need help.
Thanks.
I uninstalled the HTC drivers and reinstalled them. A suggestion since ADB didn't work. And I can't get into bootloader. No difference.
Any suggestions
Any suggestions at all. I'm desperate.
Ogre77497 said:
Any suggestions at all. I'm desperate.
Click to expand...
Click to collapse
You can get into fastboot correct?
Fastboot - Yes .. Sorta
I can get into fastboot, but I copy anything to the phone via fastboot. I'm told "unable to write". Thanks.
Ogre77497 said:
I can get into fastboot, but I copy anything to the phone via fastboot. I'm told "unable to write". Thanks.
Click to expand...
Click to collapse
Ok it's probably a problem with your USB cable or USB port. Try using another PC and another cable.
If this doesn't work read some guide to properly set up ADB, uninstall all HTC stuff and install only the "naked driver" and than run the LATEST ruu. Maybe you have upgraded your firmware and can't flash older ruu's.
Sent from my HTCONE using Tapatalk
Will Try
I'll give that a try. I really appreciate the help. I run my whole business on that phone.
Just make sure you follow my suggestions properly. It should be just the cable, and I think you don't have the right drivers for ADB. Stay calm your phone is just soft bricked. You only need to be patient and read. Naked driver here http://forum.xda-developers.com/showthread.php?t=2263822
Sent from my HTCONE using Tapatalk
elvisypi said:
Ok it's probably a problem with your USB cable or USB port. Try using another PC and another cable.
If this doesn't work read some guide to properly set up ADB, uninstall all HTC stuff and install only the "naked driver" and than run the LATEST ruu. Maybe you have upgraded your firmware and can't flash older ruu's.
Sent from my HTCONE using Tapatalk
Click to expand...
Click to collapse
+1
I did the same thing a few weeks ago and lost recovery in the process. The naked driver did the trick. Also the thread about restoring after a gsm rom install is a great. It's not a loss. Not having an sd card in the one made things a little different for me, but I was able to get everything back. These drivers suck!
Progress
I've followed your directions. I downloaded the naked driver, and the minimal ADT. I found the correct RUU (3.04.651.2) I attempted to relock the bootloader, but I got a message .. " Status read failed <no such file or directory>" Went ahead and tried flashing the RUU (fastboot flash zip ruu.zip), and got the message "FAILED Remote: not allowed"
The phone is unlocked, CID SPCS_001, and HBOOT 1.44
I wasn't able to access TWRP recovery earlier, so I tried reflashing the img file. Failed remote: image update error. I tried erasing the cache .. "Failed remote erasing error", but now I can get into TWRP.
TWRP says I have "0" internal storage. I also can't mount system, data or cache. The choices are there but can't be selected.
I can't use ADB (device not found). and the phone isn't detected by windows. I had installed the HTC drivers, but couldn't uninstall them, so I install HTC Sync manager and then uninstalled it. The program deleted the HTC drivers when I uninstalled it. When I plugged in the HTC One (with a new cable) nothing happened, so I used the windows hardware wizard to install the naked driver. The phone still isn't detected, but again I can issue fastboot commands. Well, one fastboot command and then the phone freezes up.
If I use filemanager within TWRP there's no emulated sd card. I really think that's where my problem is. No partitions are available. And, when I use TWRP to shut down, it warns me that no OS is installed.
Any other suggestions?
I sure appreciate all your help. Thanks.
elvisypi said:
Just make sure you follow my suggestions properly. It should be just the cable, and I think you don't have the right drivers for ADB. Stay calm your phone is just soft bricked. You only need to be patient and read. Naked driver here http://forum.xda-developers.com/showthread.php?t=2263822
Sent from my HTCONE using Tapatalk
Click to expand...
Click to collapse
Are you Linux savvy at all? All this crap is far easier on Linux. I guarantee the drivers are absolute cakewalk -- there isn't a specific driver at all, just a rule to tell the kernel about the device.
I can give you the udev rule for the phone if you are sick of trying to get Windows to work. The Android SDK is also quite easy to install.
If you want to try, just install Ubuntu 12.04 LTS. Later versions also work, but that version is the current stable release. I can help from there.
Try another cable maybe it's faulty. Uninstall all the HTC crap, run some cleaner app like ccleaner (maybe there are leftovers) and install only the naked driver. Your phone should be detected. Make sure you have the latest version of ADB. here's the latest http://click.xda-developers.com/api...n 1.1.3 Here&jsonp=vglnk_jsonp_13877458281136
The ruu is not to be flashed with fastboot commands, you must run the exe file
Here's the latest ruu
http://click.xda-developers.com/api....05.651 .5&jsonp=vglnk_jsonp_138775039936710
-extract zip to a folder on your pc
-using fastboot, type this cmd: fastboot oem lock this will relock the bootloader
-from pc, run ARUWizard.exe from the extracted folder. it will run the RUU utility & flash back to stock
Sent from my HTCONE using Tapatalk
Installing Ubuntu
Not Linux savy at all, but I'll install Ubuntu. I'll let you know when I'm able to boot into it. Thanks.
tdhite said:
Are you Linux savvy at all? All this crap is far easier on Linux. I guarantee the drivers are absolute cakewalk -- there isn't a specific driver at all, just a rule to tell the kernel about the device.
I can give you the udev rule for the phone if you are sick of trying to get Windows to work. The Android SDK is also quite easy to install.
If you want to try, just install Ubuntu 12.04 LTS. Later versions also work, but that version is the current stable release. I can help from there.
Click to expand...
Click to collapse
Ogre77497 said:
Not Linux savy at all, but I'll install Ubuntu. I'll let you know when I'm able to boot into it. Thanks.
Click to expand...
Click to collapse
When you get it installed, login and open a terminal windows (it'll install Unity by default, so click on the first button on the left sidebar and search for terminal, then click on it), then type exactly the following (cut/copy/paste should do it too) noting that the first command will make you give your password since sudo requests root level access:
sudo apt-get update -y
sudo apt-get install -y wget openjdk-7-jdk
wget http://dl.google.com/android/android-sdk_r22.3-linux.tgz
mkdir ~/bin
cd ~/bin
tar xvzf ~/android-sdk_r22.3-linux.tgz
cat >> ~/.bashrc <<EOF
if [ -d ${HOME}/bin/android-sdk-linux ]; then
PATH+=":${HOME}/bin/android-sdk-linux/tools"
PATH+=":${HOME}/bin/android-sdk-linux/platform-tools"
fi
export PATH
EOF
exit
That last command will exit the terminal. Start another and it'll read the .bashrc file and presto -- you have SDK access from everywhere.
Then, type this command:
android
That will bring up the SDK UI -- let it download/install all of the latest stuff (r22 of the tools and whatnot).
When done, close the android SDK window.
Type adb (bet it works), but fastboot will require root access (I'm not going to teach you how to get around that yet -- no problem, you just run sudo and I'll show that in a sec).
Finally, plug in your HTC One and type adb devices and let's see if it didn't just know it already.
Lemme know.
Ubuntu 12.04 LTS Installed
I have Linux running on my Dell laptop. No internet though. Something about installing broadcom drivers ..
What do I need to do, sir?
tdhite said:
Are you Linux savvy at all? All this crap is far easier on Linux. I guarantee the drivers are absolute cakewalk -- there isn't a specific driver at all, just a rule to tell the kernel about the device.
I can give you the udev rule for the phone if you are sick of trying to get Windows to work. The Android SDK is also quite easy to install.
If you want to try, just install Ubuntu 12.04 LTS. Later versions also work, but that version is the current stable release. I can help from there.
Click to expand...
Click to collapse
Ogre77497 said:
I have Linux running on my Dell laptop. No internet though. Something about installing broadcom drivers ..
What do I need to do, sir?
Click to expand...
Click to collapse
Check PM
bigdaddy619 said:
Check PM
Click to expand...
Click to collapse
@bigdaddy619 probably got you covered, but if not, let me know. Your friend for Broadcom chips on Dell boxes is here:
https://help.ubuntu.com/community/WifiDocs/Driver/bcm43xx
The gist is pretty simple. If you don't know which wireless you have, do this:
1) widen your terminal window so you have ample room (good and wide);
2) run sudo lspci -v
Hunt down the Broadcom info -- it'll say which device is your broadcom wifi. Just need the numbers.
Working ..
I feel like I'm making some progress here, but it's still not being recognized. Everything worked great up until ...
After closing the SDK window, I connected the HTC One, and "Fastboot USB" came up on my phone. I typed adb devices and got a line "List of Devices attached" by nothing was showing as being attached.
If I enter a fastboot command, it hangs saying "waiting on device".
tdhite said:
When you get it installed, login and open a terminal windows (it'll install Unity by default, so click on the first button on the left sidebar and search for terminal, then click on it), then type exactly the following (cut/copy/paste should do it too) noting that the first command will make you give your password since sudo requests root level access:
sudo apt-get update -y
sudo apt-get install -y wget openjdk-7-jdk
wget http://dl.google.com/android/android-sdk_r22.3-linux.tgz
mkdir ~/bin
cd ~/bin
tar xvzf ~/android-sdk_r22.3-linux.tgz
cat >> ~/.bashrc <<EOF
if [ -d ${HOME}/bin/android-sdk-linux ]; then
PATH+=":${HOME}/bin/android-sdk-linux/tools"
PATH+=":${HOME}/bin/android-sdk-linux/platform-tools"
fi
export PATH
EOF
exit
That last command will exit the terminal. Start another and it'll read the .bashrc file and presto -- you have SDK access from everywhere.
Then, type this command:
android
That will bring up the SDK UI -- let it download/install all of the latest stuff (r22 of the tools and whatnot).
When done, close the android SDK window.
Type adb (bet it works), but fastboot will require root access (I'm not going to teach you how to get around that yet -- no problem, you just run sudo and I'll show that in a sec).
Finally, plug in your HTC One and type adb devices and let's see if it didn't just know it already.
Lemme know.
Click to expand...
Click to collapse
Ogre77497 said:
I feel like I'm making some progress here ....
Click to expand...
Click to collapse
Hang in, writing you some instructions, just a few minutes -- just need to get a udev rule into place but I want to make it easy for you.
---------- Post added at 08:18 PM ---------- Previous post was at 07:50 PM ----------
tdhite said:
Hang in, writing you some instructions, just a few minutes -- just need to get a udev rule into place but I want to make it easy for you.
Click to expand...
Click to collapse
Actually -- let's walk before we run. I loaded up Ubuntu real quick to assure I can duplicate what I want you to see. So, do this:
1) connect (if not already connected) the HTC to the usb port so you get 'fastboot (usb)' as normal;
2) type the following:
sudo su
lsusb -v >/tmp/lsusb.txt
chmod 666 /tmp/lsbusb.txt
exit
Now, edit that file in the text editor (just search for 'edit' like you did for 'termina' and select the "Text Editor". When you get that open, have it "File | Open" the file above -- /tmp/lsusb.txt
Then look through for text similar to what I give below. If we get that -- I need the idVendor line -- it should read: "idVendor 0x0bb4 High Tech Computer Corp."
I copied some sample output from my own machine so you can see how it should look:
--------
probably a bunch of stuff we don't care about, then something like...
Bus 001 Device 005: ID 0bb4:0ff0 High Tech Computer Corp.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.10
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x0bb4 High Tech Computer Corp.
idProduct 0x0ff0
bcdDevice 1.00
iManufacturer 1 htc, Inc
iProduct 2 Android 1.0
iSerial 3 XXXXXXXXXXXX (I X'd this out -- it'll be your device serial id).
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
and a bunch more stuff...
If we don't see that, we got troubles. If we do -- we'll make a udev rule to load it up for adb and fastboot.
It appears he's bricked, when we first mounted the phone to the PC and it tried to install drivers we got QHSUSB_DLOAD which usually indicates a brick.
The strange thing was we could still access fastbootusb and the PC would recognize it being in fastboot. But any other command then fastboot devices would lock up the bootloader and fail.
Getting Closer
That's exactly it. "idVendor 0x0bb4 High Tech Computer Corp."
Finally, something worked. Thanks.
Now, edit that file in the text editor (just search for 'edit' like you did for 'termina' and select the "Text Editor". When you get that open, have it "File | Open" the file above -- /tmp/lsusb.txt
Then look through for text similar to what I give below. If we get that -- I need the idVendor line -- it should read: "idVendor 0x0bb4 High Tech Computer Corp."
Hello, i searched but i couldn'tfind any solution. I connect my phone to laptop(xp) by usb but laptop doesnt recognize my phone. It says mtp driver couldnt install. I found some mtp driver installed but didnt solved again.Someone can help me about that.
Sent from my HTC One using XDA Free mobile app
Any support?
Sent from my HTC One using XDA Free mobile app
forcible79 said:
Hello, i searched but i couldn'tfind any solution. I connect my phone to laptop(xp) by usb but laptop doesnt recognize my phone. It says mtp driver couldnt install. I found some mtp driver installed but didnt solved again.Someone can help me about that.
Sent from my HTC One using XDA Free mobile app
Click to expand...
Click to collapse
Check out this FAQ #2 to see if it will fix your issue.
There was just windows 7 and 8. İ am using windows XP. This solution doesnt work for wndows xp. Any different idea?
There was just windows 7 and 8. I am using windows XP. This solution doesnt work for wndows xp. Any different idea?
forcible79 said:
There was just windows 7 and 8. I am using windows XP. This solution doesnt work for wndows xp. Any different idea?
Click to expand...
Click to collapse
The steps are basically the save for XP, Win 7 and Win 8. Here are the HTC drivers for XP it is labeled 2K.
majmoz said:
The steps are basically the save for XP, Win 7 and Win 8. Here are the HTC drivers for XP it is labeled 2K.
Click to expand...
Click to collapse
Still i have same failure. Computer see nothing about my phone. I put jpeg about problem
forcible79 said:
Still i have same failure. Computer see nothing about my phone. I put jpeg about problem
Click to expand...
Click to collapse
Have you tried different ports? Cables? Computers?
You can try Linux on a USB and you don't have to install it on your computer, here how:
HOW TO USE LINUX FOR FASTBOOT & ADB VIA USB
This guide originally posted by @Danny201281
http://forum.xda-developers.com/showpost.php?p=54272479&postcount=219Linux is your friend; if your drivers are not working the chances of getting them working again without the phone booting are slim. But Linux doesn't need drivers to talk to your device.
Go here: http://www.pendrivelinux.com/ and download Universal USB Installer – Easy as 1 2 3
Then go here: http://releases.ubuntu.com/12.04/ and download Ubuntu from the first link at the top that says PC (Intel x86) desktop CD
Then use these files to create a bootable Linux USB drive with at least a 2 GB persistent file for storing files. You'll also probably need to change your boot settings in the computers bios to boot from USB.
MOVING YOUR FILES TO UBUNTU
Once booted you should be at a screen with options to "Try Ubuntu” or "Install Ubuntu". We don’t need to Install anything so just choose "Try Ubuntu" and the computer will boot to the Ubuntu Desktop (If you get a popup saying "system has encountered an error" or something similar just cancel and ignore it, it should have no effect on what we need to do as it is due to missing Linux OS updates we don’t need). On the left of the screen you'll see the Dock. Open the orange folder icon near the top this is the Home folder. It’s where we need to put any files we need to work with such as a rom.zip you want to push to the device or recovery.img files for flashing.
To get your files here is a simple drag and drop process. In the top left of the Home folder you'll see the drive structure of you pc under devices. Choose your PCs hard drive and Right-Click then" Open in a new window". Locate your .zip or .img files and drag them into the home folder. Now wait for the copy process to complete and rename them for easier typing later, e.g., rom.zip, firmware.zip or recovery.img etc.
USING ADB AND FASTBOOT
First you need to install adb fastboot; this is easy just 3 commands in the terminal. Thanks to Webupd8 team.
Code:
sudo add-apt-repository ppa:nilarimogard/webupd8
Code:
sudo apt-get update
Code:
sudo apt-get install android-tools-adb android-tools-fastboot
Make sure your connected to the internet and press Ctrl+Alt+T to open the terminal then type or copy and paste the above commands one at a time waiting for each to complete their output. It may seem to have stopped at times but be patient when the prompt returns to normal enter the next command and when there all done you’re ready to use adb and fastboot.
Once you've moved all the files you need to the home folder that’s it you’re ready to go. Close everything down on the desktop (optional) and press Ctrl+Alt+T this will open the terminal now connect your phone with the USB cable. All fastboot commands need to have the "sudo" prefix added at the start, e.g.
fastboot flash recovery recovery.img becomes sudo fastboot flash recovery recovery.img
fastboot devices becomes sudo fastboot devices
However, adb should work basically the same as on windows. If you do have problems with normal adb commands adding “sudo” can help here as well.
If you get "no permissions ?????????" when trying to use adb, type:
Code:
killall adb
Disconnect the phone for a few seconds, then reconnect and type:
Code:
sudo adb devices
adb should now work as normal without the sudo prefix.
Click to expand...
Click to collapse
Just downloaded and installed v1.4.2 of adb via the Google drive link. It seemed to install fine except for an error installing drivers dialog box. When I closed dialog box, the rest of the installation went fine, answering yes to each setup question in the virtual terminal.
Then when I plug in the n6, widows tells me it has no drivers for the usb device, and in the terminal when I query the terminal with "fastboot devices", I get nothing.
This is windows7 running natively on a boot camp partition, (iow not on a vm).
Tried the install twice. Have not tried the osx version, and my linux box is somewhere else.
-peter
Now I know to use the older version. .. but do I need to uninstall the buggy new one first?
If so, what is the best method of uninstalling?
-peter
I get the error in the title over and over again. When my device is on normally, it is recognized fine. I have tried uninstalling the drivers in device manager, but even that doesn't work. Using Squabbi's toolkit crashes when I try to download the HTC drivers.
Any ideas on how to fix it? I have a 4.1.2 device with 1.44 hboot. Can/should this be updated?
Is it true that there are no drivers for Windows 8? If so, do you recommend a linux VM ?
Thanks
Ubuntu USB boot
Or a windows 7 machine.
SaHiLzZ said:
Ubuntu USB boot
Or a windows 7 machine.
Click to expand...
Click to collapse
To do what? Just whenever I need to use adb functions?
Bilge656 said:
To do what? Just whenever I need to use adb functions?
Click to expand...
Click to collapse
yup, HBOOT 1.44 doesn't work in Windows 8 or above.
Bilge656 said:
To do what? Just whenever I need to use adb functions?
Click to expand...
Click to collapse
ADB should still work. It works in recovery or OS.
Fastboot is what you won't be working on windows 8 and 1.44 hboot
Oh ok. Is there any toolkit for Linux? Any guides?
Bilge656 said:
Oh ok. Is there any toolkit for Linux? Any guides?
Click to expand...
Click to collapse
Here use this guide:
HOW TO USE LINUX FOR FASTBOOT & ADB VIA USB
This guide originally posted by @Danny201281
http://forum.xda-developers.com/showpost.php?p=54272479&postcount=219Linux is your friend; if your drivers are not working the chances of getting them working again without the phone booting are slim. But Linux doesn't need drivers to talk to your device.
Go here: http://www.pendrivelinux.com/ and download Universal USB Installer – Easy as 1 2 3
Then go here: http://releases.ubuntu.com/12.04/ and download Ubuntu from the first link at the top that says PC (Intel x86) desktop CD
Then use these files to create a bootable Linux USB drive with at least a 2 GB persistent file for storing files. You'll also probably need to change your boot settings in the computers bios to boot from USB.
MOVING YOUR FILES TO UBUNTU
Once booted you should be at a screen with options to "Try Ubuntu” or "Install Ubuntu". We don’t need to Install anything so just choose "Try Ubuntu" and the computer will boot to the Ubuntu Desktop (If you get a popup saying "system has encountered an error" or something similar just cancel and ignore it, it should have no effect on what we need to do as it is due to missing Linux OS updates we don’t need). On the left of the screen you'll see the Dock. Open the orange folder icon near the top this is the Home folder. It’s where we need to put any files we need to work with such as a rom.zip you want to push to the device or recovery.img files for flashing.
To get your files here is a simple drag and drop process. In the top left of the Home folder you'll see the drive structure of you pc under devices. Choose your PCs hard drive and Right-Click then" Open in a new window". Locate your .zip or .img files and drag them into the home folder. Now wait for the copy process to complete and rename them for easier typing later, e.g., rom.zip, firmware.zip or recovery.img etc.
USING ADB AND FASTBOOT
First you need to install adb fastboot; this is easy just 3 commands in the terminal. Thanks to Webupd8 team.
Code:
sudo add-apt-repository ppa:nilarimogard/webupd8
Code:
sudo apt-get update
Code:
sudo apt-get install android-tools-adb android-tools-fastboot
Make sure your connected to the internet and press Ctrl+Alt+T to open the terminal then type or copy and paste the above commands one at a time waiting for each to complete their output. It may seem to have stopped at times but be patient when the prompt returns to normal enter the next command and when there all done you’re ready to use adb and fastboot.
Once you've moved all the files you need to the home folder that’s it you’re ready to go. Close everything down on the desktop (optional) and press Ctrl+Alt+T this will open the terminal now connect your phone with the USB cable. All fastboot commands need to have the "sudo" prefix added at the start, e.g.
fastboot flash recovery recovery.img becomes sudo fastboot flash recovery recovery.img
fastboot devices becomes sudo fastboot devices
However, adb should work basically the same as on windows. If you do have problems with normal adb commands adding “sudo” can help here as well.
If you get "no permissions ?????????" when trying to use adb, type:
Code:
killall adb
Disconnect the phone for a few seconds, then reconnect and type:
Code:
sudo adb devices
adb should now work as normal without the sudo prefix.
Click to expand...
Click to collapse
majmoz said:
Here use this guide:
Click to expand...
Click to collapse
Ok so I did all of that, but my device still is not recognized. It is not detected at all in my Windows 8 build as well as my virtual machine of Ubuntu.
Bilge656 said:
Ok so I did all of that, but my device still is not recognized. It is not detected at all in my Windows 8 build as well as my virtual machine of Ubuntu.
Click to expand...
Click to collapse
you have to boot linux from a usb drive or from a live cd, not like a virtual machine like virtualbox or anything similar.
alray said:
you have to boot linux from a usb drive or from a live cd, not like a virtual machine like virtualbox or anything similar.
Click to expand...
Click to collapse
I did that, and at first I plugged it in and it was recognized. Then after awhile, it stopped being recognized all together after some reboots.
In the past 3 months or so I noticed that my Mi5 3GB 32GB is not recognized by my PC anymore. I didn't care too much because I hardly connect my phone to PC.
I was running the lastest xiaomi.eu Rom unrooted.
So on Thursday, I deleted my OS by mistake, therefore I do not get past the Mi Logo.
I can boot into TWRP Recovery & Fastboot however, there is not code when using CMD adb/fastboot devices such as 1cwe3f23.
Also, I read about the EOL method aka test point method, to force a connection as Qualcomm driver with no success. Different PCS dont recognize any drivers.
The battery is not an issue because I can easily charge my phone to 100% and it can hold its charge, therefore I do not think it is a battery related issue.
What i did so far :
- used 3 differenct USB C cables and PC -> phone still not recognized
- Installed all lastest driver on Drivers -> phone still not recognized
- tried to use the test points method -> phone still not recognized
- tried Miflash tool -> phone is still not recognized
- tried Mi PC Guide -> didn't work either
Then I read somewhere that I can use a OTG cable with a pen drive
- OTG storage is not recognized in TWRP recovery and cannot be selected. [OTG STORAGE 0MB even if different pen drives are connected]
SO my Main problem is not the phone itself, it is that I cannot get any data onto the internal memory because I can't get past TWRP.
Please help me out since I really struggling with this problem for the past 7 days and I'm desperate now for any kind of help.
Greetings and thanks in advance.
amando1991 said:
SO my Main problem is not the phone itself, it is that I cannot get any data onto the internal memory because I can't get past TWRP.
Click to expand...
Click to collapse
What do you mean by "can't get past TWRP"? Is it that you can't flash any ROM to system?
You have fastboot and TWRP, so things are likely fine. Rather than use Windows, you might have more luck running linux inside VirtualBox (plenty of guides around XDA). If you can sudo fastboot devices in linux, you should be good to go. Otherwise, the error reporting is often richer/simpler in linux.
Hi bro
same as me, 4 days ago...
system, vendor error
flashing stock rom miui9 via twrp
although the error twrap will only provoke usb computer,
if it works usb computer, try flashing by using miflash...
goodluck
Sory bad englis
moo113 said:
What do you mean by "can't get past TWRP"? Is it that you can't flash any ROM to system?
You have fastboot and TWRP, so things are likely fine. Rather than use Windows, you might have more luck running linux inside VirtualBox (plenty of guides around XDA). If you can sudo fastboot devices in linux, you should be good to go. Otherwise, the error reporting is often richer/simpler in linux.
Click to expand...
Click to collapse
I did as you recommended and used Ubuntu. However also there the system didn't recognize the phone when plugged. It may because I am not fully familiar with Ubuntu. I would appreciate if you could point me in the direction of a tutorial.
same as me, 4 days ago...
system, vendor error
flashing stock rom miui9 via twrp
although the error twrap will only provoke usb computer,
if it works usb computer, try flashing by using miflash...
Click to expand...
Click to collapse
could you be more precise please? How did you overcome not having a PC conncetion?
Currently, I am not able to transfer any kind of data to the phone either by PC or OTG. Furthermore, the internal storage is completely empty after wiping everything by mistake.
I have twrp working fine, but without any data on the device, I cannot use it. Also, the device only stays in fastboot for roughly 20 secs before it turns off.
any help is welcomed. Thank you
EDIT : I got Ubuntu to work but its the same process. My phone is not recognized and running the command adb devices gives me
"list of devices" .... thats not! Nothing ! usally there is the code Phones ID but nothing there
amando1991 said:
EDIT : I got Ubuntu to work but its the same process. My phone is not recognized and running the command adb devices gives me
"list of devices" .... thats not! Nothing ! usally there is the code Phones ID but nothing there
Click to expand...
Click to collapse
A number of different issues could be here.
#1 Firstly, ensure you've installed openvm tools and reboot. This should enable things like hardware pass through.
$ apt-get install open-vm-tools open-vm-tools-desktop
$ sudo init 6
Then, follow these instructions for the pass through (may be slightly different, but very similar) https://forum.xda-developers.com/showthread.php?t=570452
#2 Type "adb" and see what version is in use in the first line of output. If it's 1.0.0.32 or older, it might be an issue. Try installing the following packages:
$ sudo apt-get install android-tools-fastboot android-tools-adb
You might need to find a newer version elsewhere, Ubuntu repos are often old. Google around for 1.0.36 or newer. This could solve your issue.
#3 Ensure you have the necessary rules for the Mi 5. There's a few different hardware models. The Arch Wiki can walk you through it better than I can: https://wiki.archlinux.org/index.php/android#Connect_device (ignore the package hyperlinks, they're arch-specific). Only do this if you've properly configured the pass through from #1. Do F"igure out device IDs" and then "Adding udev Rules". Instead of the "udevadm" command run
$ sudo service udev restart
If you're still not detected, no idea.
moo113 said:
A number of different issues could be here.
#1 Firstly, ensure you've installed openvm tools and reboot. This should enable things like hardware pass through.
$ apt-get install open-vm-tools open-vm-tools-desktop
$ sudo init 6
Then, follow these instructions for the pass through (may be slightly different, but very similar) https://forum.xda-developers.com/showthread.php?t=570452
#2 Type "adb" and see what version is in use in the first line of output. If it's 1.0.0.32 or older, it might be an issue. Try installing the following packages:
$ sudo apt-get install android-tools-fastboot android-tools-adb
You might need to find a newer version elsewhere, Ubuntu repos are often old. Google around for 1.0.36 or newer. This could solve your issue.
#3 Ensure you have the necessary rules for the Mi 5. There's a few different hardware models. The Arch Wiki can walk you through it better than I can: https://wiki.archlinux.org/index.php/android#Connect_device (ignore the package hyperlinks, they're arch-specific). Only do this if you've properly configured the pass through from #1. Do F"igure out device IDs" and then "Adding udev Rules". Instead of the "udevadm" command run
$ sudo service udev restart
If you're still not detected, no idea.
Click to expand...
Click to collapse
Thank you again for the help!
Unfortunately, it appears that my device is still not recognized by either Ubuntu or Win10.
I Have taken the necessary steps to install Ubuntu and update the adb drivers (1.0.39) but still no luck so far.
It really pisses me off since I was stupid enough to wipe the internal storage ☹ and not I am not able to transfer any data to the devices again.
Any other out of the box ideas?
amando1991 said:
Thank you again for the help!
Unfortunately, it appears that my device is still not recognized by either Ubuntu or Win10.
I Have taken the necessary steps to install Ubuntu and update the adb drivers (1.0.39) but still no luck so far.
It really pisses me off since I was stupid enough to wipe the internal storage ☹ and not I am not able to transfer any data to the devices again.
Any other out of the box ideas?
Click to expand...
Click to collapse
You configured the USB pass through to your Ubuntu host? Double check you followed #3, and then run sudo fastboot devices. That step is tricky for some.
Reconnect your phone to your Ubuntu host (in fastboot) and run "dmesg -T", see what errors are present. If you have no errors, I would image it's a configuration issue. Other than that I'm out of ideas.
moo113 said:
You configured the USB pass through to your Ubuntu host? Double check you followed #3, and then run sudo fastboot devices. That step is tricky for some.
Reconnect your phone to your Ubuntu host (in fastboot) and run "dmesg -T", see what errors are present. If you have no errors, I would image it's a configuration issue. Other than that I'm out of ideas.
Click to expand...
Click to collapse
OMFG!!! First of all, thank you for support and your patience. I really appreciate it.
HOWEVER, all it was is that the USB PORT was full of dust( literally tons!) which appears to have allowed to charge the phone but seemed to have cloaked up some part of the responsibile for a usb connection to a computer.
Stupid me should have known this because the usb port was kinda wobbly which I had mistaken for degradation using the phone for almost 2 years
MANY THANKS!
moo113 said:
What do you mean by "can't get past TWRP"? Is it that you can't flash any ROM to system?
You have fastboot and TWRP, so things are likely fine. Rather than use Windows, you might have more luck running linux inside VirtualBox (plenty of guides around XDA). If you can sudo fastboot devices in linux, you should be good to go. Otherwise, the error reporting is often richer/simpler in linux.
Click to expand...
Click to collapse
Hey , I was researching about my issue and came up to this. I'd be really glad if you can sort me out with this. I have the same mobile , by mistakenly wiped out the phone including the internal storage , my pc does not detect the device , and whenever i go to fastboot mode to try something like miflash , it goes back to twrp after 15 seconds. Also , i tried several OTG's but none of them get detected on TWRP , and I am stuck on this thing for almost a week now . Please guide me on how to sort this out . i basically just downloaded adb files , miflash , etc from the internet and never reinstalled them. also i used several usb c cables to connect to pc and even then device manager does not detect it . thank you . i would really appreciate your reply.