Related
Hi everyone.
Here's my build of TWRP 3.0.3-0 for Huawei P7.
Features:
Supports USB OTG, so you can use USB flash drive as external storage for backups, zip installations.
Added feature to make backup/restore of internal storage.
Added feature to make backup/restore of oeminfo partition. This partition contains info about vendor and current installed version. So in case if you want to rollback to 4.4.2, for example, or revert back your previous vendor version, you can just restore oeminfo from backup with 4.4.2 version or other vendor and flash appropriate firmware without flashing transition package, vendor and without getting "cust fail" error.
Combined with stock EMUI 3.1 recovery. In case of power-on by holding power + vol+ or rebooting into recovery by command or any 3rd party application: will boot in TWRP. In case of local update, OTA-update, factory reset from menu or "force update" (3buttons method): will boot into EMUI recovery. Thus you don't have to flash stock recovery before OTA-update, flashing official firmware or doing factory rest.
Off-mode charger updated from EMUI 3.1 (for 4.4.2)
custom.bin and cust symlinks are saved/restored (if they were exist) in case of Wipe/Format Data. So there is not gonna be "cust" issues after factory reset in TWRP.
Excluded SuperSU from build.
Enabled encrypted data support.
Screen lock by power button replaced with screen off.
Requirements:
Unlocked bootloader
Android 4.4.2 - 5.1.1
Installation:
Reboot in fastboot mode
Flash image via fastboot
Code:
fastboot flash recovery TWRP_P7-3.0.3-0.img
fastboot reboot
From TWRP: Press "Install" and select zip-archive
Notes:
Because internal storage is not a separate block device and just a subfolder of "userdata" partition, before you can make backup/restore of internal storage, first you should do Mount -> Data.
Download: TWRP_P7-3.0.3-0.img
For TWRP: TWRP_P7-3.0.3-0.zip
Previous:
Download: TWRP_P7-3.0.2-0.img
For TWRP: TWRP_P7-3.0.2-0.zip
Download: TWRP_P7-3.0.0-0.img
For TWRP: TWRP_P7-3.0.0-0.zip
Thanks for supportion the P7 devices, greate job
Is it possible, to restore 2.8.7.0-backups?
pokko said:
Is it possible, to restore 2.8.7.0-backups?
Click to expand...
Click to collapse
I can't tell you for sure about backups made by araca's 2.8.7.0 - I don't know his partition layouts and backup naming method, but if you were using my build of 2.8.7.0, then yes, you can.
Anyway, it's better to make a new backup, for any case...
Thanks . works great on my p7 especially the factory reset with cust .
can you explain how i can build similar twrp for the mate S . your help will be much appreciated
Hi !
Whenever I use 3buttons method my phone goes to EMUI recovery ,
Whenever I use 3rd party application my phone goes to TWRP recovery !
There is no update file on my storage so in both cases my phone should go to TWRP recovery ! What is the problem ? Please solve this !
andromodgod said:
can you explain how i can build similar twrp for the mate S . your help will be much appreciated
Click to expand...
Click to collapse
What do you mean by similar?
You'll have to make device tree to build TWRP. Mate S is much different from P7, so I think I couldn't help you with it.
mohammadsaa said:
Hi !
Whenever I use 3buttons method my phone goes to EMUI recovery ,
Whenever I use 3rd party application my phone goes to TWRP recovery !
There is no update file on my storage so in both cases my phone should go to TWRP recovery ! What is the problem ? Please solve this !
Click to expand...
Click to collapse
There is not any problem. 3 buttons method is used for "force update". If you want to boot into TWRP, use "power" + "vol+" instead of 3 buttons. Read the first post attentively!
@Kostyan_nsk_one question, why if internal storage is a subfolder of user data in recovery the size of internal storage partition is bigger of data partition?
complicazio said:
@Kostyan_nsk_one question, why if internal storage is a subfolder of user data in recovery the size of internal storage partition is bigger of data partition?
Click to expand...
Click to collapse
TWRP excludes /data/share folder from backup of /data folder. Thus, if you have a lot of photos, music, etc in your internal storage, its backup size will be greater than size of /data backup.
Kostyan_nsk said:
TWRP excludes /data/share folder from backup of /data folder. Thus, if you have a lot of photos, music, etc in your internal storage, its backup size will be greater than size of /data backup.
Click to expand...
Click to collapse
Well, thus if I want to do a nandroid backup I have to check data and internal storage, not only data partition because of default it's not selected internal memory
complicazio said:
Well, thus if I want to do a nandroid backup I have to check data and internal storage, not only data partition because of default it's not selected internal memory
Click to expand...
Click to collapse
It's not mandatoryly for nandroid backup. Depends on what kind of data you want to save. /data contains user applications and system settings; /data/share (i.e. internal storage) contains your personal data (screenshots, photos, music, videos, etc) if you didn't moved them to sd-card. It's up to you, what to backup and what not.
@Kostyan_nsk I appreciate your work. I have already built TWRP for my Huawei device but I am struggling to fix custom.bin and /data/cust symlink being destroyed after factory reset. I have placed the necessary code in partitions.cpp under Wipe partition block. Can you tell me which method you used to fix this?
@Kostyan_nsk When I do a backup in the internal memory then via es file Explorer goes into TWRP folder in sdcard0 (internal memory) it is empty, and if I go into the folder media / share / 0 / TWRP I find the backup. They are not the same thing? While if I do backup in the external sdcard its all ok.
Sent from my Paris using XDA-Developers mobile app
Hi,, I am new here ... i think this very nice .. do you tell me how is instal for my phone p7?
albelushi7 said:
Hi,, I am new here ... i think this very nice .. do you tell me how is instal for my phone p7?
Click to expand...
Click to collapse
Read first post
RangerP7 said:
Read first post
Click to expand...
Click to collapse
What is the first post?
I mean instal twrp!!
How?
If you mean Buckup I do this ?!!
I'm new don't forget this hhh
Think you
albelushi7 said:
What is the first post?
I mean instal twrp!!
How?
If you mean Buckup I do this ?!!
I'm new don't forget this hhh
Think you
Click to expand...
Click to collapse
First post on first page
Kostyan_nsk said:
Hi everyone.
Here's my build of TWRP 3.0.0-0 for Huawei P7.
Features:
Supports USB OTG, so you can use USB flash drive as external storage for backups, zip installations.
Added feature to make backup/restore of internal storage.
Added feature to make backup/restore of oeminfo partition. This partition contains info about vendor and current installed version. So in case if you want to rollback to 4.4.2, for example, or revert back your previous vendor version, you can just restore oeminfo from backup with 4.4.2 version or other vendor and flash appropriate firmware without flashing transition package, vendor and without getting "cust fail" error.
Combined with stock EMUI 3.1 recovery. In case of power-on by holding power + vol+ or rebooting into recovery by command or any 3rd party application: will boot in TWRP. In case of local update, OTA-update, factory reset from menu or "force update" (3buttons method): will boot into EMUI recovery. Thus you don't have to flash stock recovery before OTA-update, flashing official firmware or doing factory rest.
Off-mode charger updated from EMUI 3.1 (for 4.4.2)
custom.bin and cust symlinks are saved/restored (if they were exist) in case of Wipe/Format Data. So there is not gonna be "cust" issues after factory reset in TWRP.
Excluded SuperSU from build.
Enabled encrypted data support.
Screen lock by power button replaced with screen off.
Requirements:
Unlocked bootloader
Android 4.4.2 - 5.1.1
Installation:
Reboot in fastboot mode
Flash image via fastboot
Code:
fastboot flash recovery TWRP_P7-3.0.0-0.img
fastboot reboot
From TWRP: Press "Install" and select zip-archive
Known issues:
Because internal storage is not a separate block device and just a subfolder of "userdata" partition, before you can make backup/restore of internal storage, first you should do Mount -> Data. Otherwise you will get error, saying that TWRP can't mount "storage". So don't bother if you'll see this error.
Download: TWRP_P7-3.0.0-0.img
For TWRP: TWRP_P7-3.0.0-0.zip
Click to expand...
Click to collapse
Download ADB/FASTBOOT
Download TWRP_P7-3.0.0-0.img
And put it into the ADB / FASTBOOT folder
Install drivers of your phone
Connect your phone to your computer
Enable USB debugging on your phone
Open ADB and type:
"adb devices" (you should see now your device)
"adb reboot bootloader"
Now you should see at the bottom unlocked or locked. That means if your bootloader is unlocked. You need to unlock your bootloader to install a custom recovery.
If you see unlocked...
"fastboot flash recovery TWRP_P7-3.0.0-0.img"
That's it
Reboot your phone.
RangerP7 said:
First post on first page
Download ADB/FASTBOOT
Download TWRP_P7-3.0.0-0.img
And put it into the ADB / FASTBOOT folder
Install drivers of your phone
Connect your phone to your computer
Enable USB debugging on your phone
Open ADB and type:
"adb devices" (you should see now your device)
"adb reboot bootloader"
Now you should see at the bottom unlocked or locked. That means if your bootloader is unlocked. You need to unlock your bootloader to install a custom recovery.
If you see unlocked...
"fastboot flash recovery TWRP_P7-3.0.0-0.img"
That's it
Reboot your phone.
Click to expand...
Click to collapse
There are some nots ==
Where is ADB or link ADB/Fastboot
Where is folder Fastboot
albelushi7 said:
There are some nots ==
Where is ADB or link ADB/Fastboot
Where is folder Fastboot
Click to expand...
Click to collapse
Use the power of Google, maybe the force will be with you and you will find it
And please! inform you about flashing things on your phone. First learn how it work (your phone, bootloader, recovery, system, adb/fastboot) and after that start work...
If you are just flashing random **** on your phone without knowing what your are doing I will promise you, in less then one week you will ask for help because your phone won't start anymore...
RangerP7 said:
Use the power of Google, maybe the force will be with you and you will find it
And please! inform you about flashing things on your phone. First learn how it work (your phone, bootloader, recovery, system, adb/fastboot) and after that start work...
If you are just flashing random **** on your phone without knowing what your are doing I will promise you, in less then one week you will ask for help because your phone won't start anymore...
Click to expand...
Click to collapse
I know that
But This new for me ?
I want install this twerb ,because I think phone be better..
Just Try ?
Think you ?
Hi all. Phone is rooted and unlocked. Have twrp installed. Made a twrp backup, downloaded a new ROM (aosp). Wiped phone as in op, flashed new ROM & gapps. Upon restating, phone asked for password. I'd made sure that I'd got rid of security seetings before making backup. Tried to reinstall backup, phone boots into startup screen, then again, asks for "to start android device, enter your password". Please help.
Try deleting this file in twrp using the file manager.
/data/system/locksettings.db
954wrecker said:
Try deleting this file in twrp using the file manager.
/data/system/locksettings.db
Click to expand...
Click to collapse
Hi many thanks....but when I go into file manager, there is no file for data????
I think I've killed the phone. Any way of completely wiping and starting again?
The 3 buttons at bottom of screen. When I press the right button, message I get is:
Failed to decrypt data.
Unable to decrypt with default password. You may need to perform a format data.
Updating partition details....
.....done
Unable to mount storage
Full selinux support is present.
https://forums.oneplus.net/threads/android-password-after-locking-the-bootloader.454675/
Envoyé de mon ONEPLUS A3003 en utilisant Tapatalk
forcedairinduction said:
Hi all. Phone is rooted and unlocked. Have twrp installed. Made a twrp backup, downloaded a new ROM (aosp). Wiped phone as in op, flashed new ROM & gapps. Upon restating, phone asked for password. I'd made sure that I'd got rid of security seetings before making backup. Tried to reinstall backup, phone boots into startup screen, then again, asks for "to start android device, enter your password". Please help.
Click to expand...
Click to collapse
Glad you came here, it is simple to solve this.
1. put your device into bootloader mode
2. connect your device to pc via usb
3. install minimal adb and open command prompt in that minimal adb folder.
4. enter command - fastboot erase userdata
5. solved. but sorry, it will wipe your internal memory too.
you can even try wiping data with twrp, but it'll usually won't work at this stage. so follow the command. cheers.
Karthik_pm said:
Glad you came here, it is simple to solve this.
1. put your device into bootloader mode
2. connect your device to pc via usb
3. install minimal adb and open command prompt in that minimal adb folder.
4. enter command - fastboot erase userdata
5. solved. but sorry, it will wipe your internal memory too.
you can even try wiping data with twrp, but it'll usually won't work at this stage. so follow the command. cheers.
Click to expand...
Click to collapse
Thanks man. I managed to get it going but only by wiping data. Lost my backup and ROM seems to have flashed but is missing root
forcedairinduction said:
Thanks man. I managed to get it going but only by wiping data. Lost my backup and ROM seems to have flashed but is missing root
Click to expand...
Click to collapse
Simply flash supersu 2.79 from the XDA thread, everything will be back alright.
Hi I am going to sell my phone today. I did full return to stock:
- flashed official recovery
- flashed official 4.5 rom
- did fastboot oem lock
Does the fastboot oem lock command wipe everything like :
- twrp folder
- titaniumbackup folder
- whatsapp folder
- etc
Are these steps enough to clean all of my data from phone or should I format data then flash new rom? Thanks.
Only way to fully whipe your phone so as not let the new owner undelete/restore photos and stuff is by making sure you had data encrypted before and then format removing the front door key to your data.
Or you can use Shredder to overwrite all data making it impossible to undelete/restore photos and files. A simple format without data encryption won't do a thing to protect your data as it only removes the file allocation table and won't overwrite anything.
Well I had data encrypted, so now I should just format it thru fastboot and flash rom again, right?
Is thes command ok to format thru fastboot?
fastboot format:f2fs data
And after that just adb sideload rom from pc right?
joloxx9joloxx9 said:
Well I had data encrypted, so now I should just format it thru fastboot and flash rom again, right?
Click to expand...
Click to collapse
No need to reflash ROM after formatting data
So i was trying to install Liquid Remix rom on my op3t i wiped everything as the manual and have flashed opengapps magisk and the rom but when rebooted into the rom it asked me for my pin ive entered my pin but it said ur pin is correct but ur data has been corrupt u have to factory reset and automatically boots into twrp and when i try to boot into the system the process over and over again and i factory reset it nothing again says data is corrupt and ive flashed my recovery and try to boot into system nothing boots into fastboot iveand being a dummy i am i delted the system everything heard that u can fix it with adb sideloader but my question is can i flash a custom rom notthe stock rom please help me
Try to format data instead of wiping, either do it within TWRP (Wipe > Format Data > type "yes") or fastboot:
Code:
fastboot format userdata
Please note that all data is going to be lost, in case you didn't make a backup yet (if it's even possible to do it, since it says that data is corrupted).
przemcio510 said:
Try to format data instead of wiping, either do it within TWRP (Wipe > Format Data > type "yes") or fastboot:
Code:
fastboot format userdata
Please note that all data is going to be lost, in case you didn't make a backup yet (if it's even possible to do it, since it says that data is corrupted).
Click to expand...
Click to collapse
i already did that on accidentand deleted everything even the backups
Something similar happen to me. I was in twrp and was performing a full wipe(not factory reset), I installed RR, kernel, and then when I was installing gapps, the phone rebooted, and when I tried anything, it said e: legacy property not found( or something similar) and would not boot to system, would not flash anything, wouldn't boot to bootloader, but I was able to transfer files and use adb so I plugged into the computer and used adb reboot fastboot and booted to bootlaoder, now everything works
tergeltengo said:
i already did that on accidentand deleted everything even the backups
Click to expand...
Click to collapse
Backups are supposed to be stored outside the device you make a backup of, keep that in mind for future
Immortalis said:
Try to format data instead of wiping, either do it within TWRP (Wipe > Format Data > type "yes") or fastboot:
Code:
fastboot format userdata
Please note that all data is going to be lost, in case you didn't make a backup yet (if it's even possible to do it, since it says that data is corrupted).
Click to expand...
Click to collapse
Thank You, saved my phone.
Welcome to my thread. Today I am going to teach you how to install a custom recovery on the device and how to recover the original boot files on the phone to modify them. After modifying those files you will have root on the device. A lot of time and effort has been put into getting this to work. The custom recovery that we will be using is TWRP Recovery.
Note: Modifying your device will void the manufacturer's warranty.
All modifications made to your device are done at your own risk and you claim full
responsibility if the device is damaged or if data is lost.
First, we are going to enable OEM Unlock and USB Debugging. To do so, you will follow the steps below.
1. Sign in to your Mi Cloud Account on your phone.
2. Tap the “Settings” menu on your Mi 11 Ultra, then tap the “About Phone” option.
3. Tap the “MIUI Version” option several times until you see the “You are now a developer” message.
4. Tap the “Additional Settings” Menu, then tap the “Developer options” on your phone.
5. Activate the “OEM Unlock” option, then activate the “USB Debugging” option on your phone.
6. Tap the “Mi Unlock Status” option.
7. Tap “Agree” and then tap the “Add account and device” option on your phone.
8. Turn off your phone, then press the volume down button and the power button simultaneously to put your phone into fastboot mode.
9. Connect your phone to your PC via a USB cable.
10. Download the miflash ZIP file.
11. Extract the miflash unlock tool ZIP file. You will find the Mi USB Driver.exe file and the miflashunlock.exe file after extracting it.
12. Install the Mi USB driver on your PC.
13. Run the miflashunlock.exe file on your PC.
14. Tap the Agree button and then Sign in with your Mi Account after running the miflash_unlock.exe.
15. Click the “Unlock” button, then click the “Unlock anyway” button within the miflash tool to start the process.
16. Click the “Reboot phone” button after you see the “Unlocked successfully” message.
Downloads:
Unlock tool: https://en.miui.com/unlock/download_en.html
Additionally, we will need to have TWRP flashed to the recovery of the phone.
1. We will need to have ADB installed on the computer so download the 15 Second ADB Installer.
2. Run the ADB-Setup.exe.
3. Open a CMD terminal as an Administrator.
4. Type in the command: CD C:/ADB.
5. Type in the command: ADB Devices, make sure that there is a device showing up.
6. Download the TWRP.img to the ADB folder located on C:/ADB.
7. Make sure that you do not have a password or code lock on the device. There can not be any lock on the lock screen.
8. Type the command ADB Reboot Bootloader.
9. Type the command Fastboot Boot TWRP.img.
10. Navigate to the Advanced menu of TWRP and tap on “Install Recovery Ramdisk”.
11. Navigate back to the main menu then tap on Reboot and tap on Recovery.
Downloads:
15 Second ADB Installer: https://forum.xda-developers.com/t/...vers-15-seconds-adb-installer-v1-4-3.2588979/
TWRP image: https://drive.google.com/drive/folders/1ztP266XjxteVk8pxcD7-sD-IxihmODPV?usp=sharing
Now we will copy the three boot files on the phone and make backups.
1. Navigate to Mount on the root menu or TWRP.
2. Select the System Partition and Data partition then go back to the menu.
3. Navigate to Advanced then Terminal.
4. Type the command dd if=/dev/block/bootdevice/by-name/boot of=/sdcard/boot.img.
5. Type the command dd if=/dev/block/bootdevice/by-name/boot_a of=/sdcard/boot_a.img.
6. Type the command dd if=/dev/block/bootdevice/by-name/boot_b of=/sdcard/boot_b.img.
7. After all the commands have been entered you can now exit back to the system by rebooting to the system in the Reboot menu.
8. Next, we will install Magisk on the phone to modify the boot files, download the Magisk.apk file on your phone.
9. Open the apk and install the Magisk.apk on the device. You will have to enable Unknown Sources if you have not already.
10. Open Magisk and select install on the Magisk tab.
11. Under Method tap the Select and Patch a File and select the boot.img file.
12. Press the LET'S GO button after you have selected the file. (Make sure to note down the name of the Output file for each file).
13. Repeat steps 11 and 12 for boot file boot_a.img and boot file boot_b.img.
Downloads:
Magisk: https://github.com/topjohnwu/Magisk/releases
Now we will flash the boot files to the phone and we will be rooted!
1. Copy the files you just made from the storage of the phone under /Internal shared storage/Download/(Filenames) to the ADB folder located on C:/ADB
2. Restart the phone and once the phone screen turns off hold the Volume Down button to boot into fastboot.
3. Now this is where it is very crucial to ensure you know what each file corresponds to for the boot files. Type in the command Fastboot flash boot (Modified file name for boot.img).
4. Type in the command Fastboot Flash Boot_a (Modified file name for boot_a.img).
5. Type in the command Fastboot Flash Boot_b (Modified file name for boot_b.img).
6. Then type the command Fastboot reboot
7. Load Magisk and verify that it is indeed installed.
8. Boom rooted!
I don't get this I rooted much easier by simply flashing magisk.
I downloaded magisk zip
I then booted into fastboot connecting my ohone to the pc
I booted into twrp from fastboot with the command "fastboot boot twrp.img"
From twrp I simply flashed magisk.zip wiped dalvik and ART cache and rebooted the phone
Root done!
My question is now how can I update without loosing data.
I was thinking of installing the new rom via miflashtool without wiping data and then reflash magisk. It should work right?
xNAPx said:
I don't get this I rooted much easier by simply flashing magisk.
I downloaded magisk zip
I then booted into fastboot connecting my ohone to the pc
I booted into twrp from fastboot with the command "fastboot boot twrp.img"
From twrp I simply flashed magisk.zip wiped dalvik and ART cache and rebooted the phone
Root done!
My question is now how can I update without loosing data.
I was thinking of installing the new rom via miflashtool without wiping data and then reflash magisk. It should work right?
Click to expand...
Click to collapse
In my testing I couldn't get my phone to root with Magisk. I haven't tested that but it sounds like it should work.
Look it is super simple, it can be done on every rom with an unlocked bootloader (this must be obvious)
Download the latest magisk.zip file on your phone
Download the compatible TWRP for your device on your computer and put it into your ADB and fastboot folder and rename it "twrp.img" (make sure you replace the file extension with the ".img")
Reboot your phone into fastboot
Connect the phone to the PC
Run the check command "fastboot devices" to check if your device is listed
Then run the command "fastboot boot twrp.img"
Your phone will now boot into twrp recovery and there is no need to flash it and overwrite the original recovery
Now give twrp the permissions to look into your folder by unlocking it at boot (password of pattern depends on what you use normally for your phone)
Now since the twrp is chinese you must change your language into english (3rd button on the right then click on the globe on the up right and select the language you want)
Now go into wipe and wipe manually cache and dalvik
Now go into your system and search for magisk.zip, flash it and wipe again dalvik and cache.
Reboot your phone
Now when you boot you must have magisk through your apps, boot magisk and complete the installation process.
Reboot again and enjoy!
xNAPx said:
Look it is super simple, it can be done on every rom with an unlocked bootloader (this must be obvious)
Download the latest magisk.zip file on your phone
Download the compatible TWRP for your device on your computer and put it into your ADB and fastboot folder and rename it "twrp.img" (make sure you replace the file extension with the ".img")
Reboot your phone into fastboot
Connect the phone to the PC
Run the check command "fastboot devices" to check if your device is listed
Then run the command "fastboot boot twrp.img"
Your phone will now boot into twrp recovery and there is no need to flash it and overwrite the original recovery
Now give twrp the permissions to look into your folder by unlocking it at boot (password of pattern depends on what you use normally for your phone)
Now since the twrp is chinese you must change your language into english (3rd button on the right then click on the globe on the up right and select the language you want)
Now go into wipe and wipe manually cache and dalvik
Now go into your system and search for magisk.zip, flash it and wipe again dalvik and cache.
Reboot your phone
Now when you boot you must have magisk through your apps, boot magisk and complete the installation process.
Reboot again and enjoy!
Click to expand...
Click to collapse
is this working with EU ROM?
penyapu79 said:
is this working with EU ROM?
Click to expand...
Click to collapse
On Xiaomi EU is simpler because it inject twrp itself so you don't need to push start via adb
xNAPx said:
On Xiaomi EU is simpler because it inject twrp itself so you don't need to push start via adb
Click to expand...
Click to collapse
Ok thanks. I will try it later
On Xiaomi EU you can straight flash the update, wipe dalvik and cache and flash straight away magisk zip on top, rewipe dalvik and cache and reboot to system
xNAPx said:
On Xiaomi EU you can straight flash the update, wipe dalvik and cache and flash straight away magisk zip on top, rewipe dalvik and cache and reboot to system
Click to expand...
Click to collapse
any problem with bank apps after root?
I'm on official global ROM and I am using revolut with no issues
xNAPx said:
I'm on official global ROM and I am using revolut with no issues
Click to expand...
Click to collapse
I have the Chinese ultra with global rom but if I decide to sale how do I factory reset to do so? thanks ahead and wasn't sure where to post this.
If you want to sell it you must reinstall the original Chinese ROM and relock the bootloader
xNAPx said:
Now give twrp the permissions to look into your folder by unlocking it at boot (password of pattern depends on what you use normally for your phone)
Click to expand...
Click to collapse
Hi, xNAPx !
Thank you for this tuto, but i have a problem :/
At this step, twrp is booting straight on the menu, no password asked, and so, no access to data :/
Do you have an idea please ?
(i'm using xiaomi.eu_multi_MI11Pro_MI11Ultra_21.12.8_v12-12-fastboot)
I believe this is a known issue, there is a problem on some versions of twrp with encryption, to me never happened. What kind of screen security do you have on your phone?
xNAPx said:
I believe this is a known issue, there is a problem on some versions of twrp with encryption, to me never happened. What kind of screen security do you have on your phone?
Click to expand...
Click to collapse
A password
You can try 2 things, remove the screen lock protection or inject a different version of twrp, I never had this problem as I boot twrp via adb
xNAPx said:
You can try 2 things, remove the screen lock protection or inject a different version of twrp, I never had this problem as I boot twrp via adb
Click to expand...
Click to collapse
Thank you
Removal of the screen lock resulted as a failure too (same problem than with the screen lock)
I don't know and can't seem to find another twrp for the mi11 Ultra than this one :
Mi11Ultra(Pro)-twrp3.5.1-recovery-21.5.9-decrypted.img | by Orjon for Generic Device/Other
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
Sorry :/
Push it via adb then, in the shell type:
Fastboot boot twrp.img
xNAPx said:
Push it via adb then, in the shell type:
Fastboot boot twrp.img
Click to expand...
Click to collapse
That's what i'm doing from the beginning, but it doesn't work
What does not work in specific? It's a bit too generic