Hey, I recently rooted my Kindle Fire HD and everything was working great, until I installed an Xposed tweak that caused my Kindle to start boot looping and then thereafter I went ahead and screwed it up even worse - by messing with various fastboot methods to get it working again. Yeah... I should have just left it as it was, I know...
I've read about how there are signature checks whenever the Kindle boots up which I'm assuming I don't have anymore. So, I'm curious if there is anyway to come back from this? From what I've read, if I had backed up the partitions, technically I should have been able to restore them - but unfortunately here we are.
I've also downloaded the latest update from Amazon 'update-kindle-11.3.1.0_user_310084920' and after converting it to a zip file, there is a 'boot.img' and a 'recovery.img' which I would assume would have the signatures already within them, but no system.img. Is there anyway for someone to create an exact backup of that file, or is that not possible right now without a second bootloader?
I'm honestly really unsure of what to do here, I've tried a myriad of different approaches and still it looks like this is a bad brick... However I do hope someone out there has a solution, I'd love to get this device working again.
Oh and what happens whenever I start it up, is that I just get the Amazon Kindle Fire Logo (Pure White), without any changes. It doesn't turn gold with the animation or anything.
Hyperiunn said:
Hey, I recently rooted my Kindle Fire HD and everything was working great, until I installed an Xposed tweak that caused my Kindle to start boot looping and then thereafter I went ahead and screwed it up even worse - by messing with various fastboot methods to get it working again. Yeah... I should have just left it as it was, I know...
I've read about how there are signature checks whenever the Kindle boots up which I'm assuming I don't have anymore. So, I'm curious if there is anyway to come back from this? From what I've read, if I had backed up the partitions, technically I should have been able to restore them - but unfortunately here we are.
I've also downloaded the latest update from Amazon 'update-kindle-11.3.1.0_user_310084920' and after converting it to a zip file, there is a 'boot.img' and a 'recovery.img' which I would assume would have the signatures already within them, but no system.img. Is there anyway for someone to create an exact backup of that file, or is that not possible right now without a second bootloader?
I'm honestly really unsure of what to do here, I've tried a myriad of different approaches and still it looks like this is a bad brick... However I do hope someone out there has a solution, I'd love to get this device working again.
Oh and what happens whenever I start it up, is that I just get the Amazon Kindle Fire Logo (Pure White), without any changes. It doesn't turn gold with the animation or anything.
Click to expand...
Click to collapse
The 2013 Kindle Fire HD is not setup for Xposed yet. There is no bootloader access yet therefore there is no way to recover yet. You have two options at this point. Wait until there is a bootloader exploit or contact Amazon for an exchange.
The only things available are root, remove OTA updates and remove lock screen ads. Even Google Play is only for window shopping at the moment.
Sent from my Nexus 7 Flo running Odex SinLess ROM 4.4.2 with ElementalX kernel using XDA Premium 4 mobile app
LinearEquation said:
The 2013 Kindle Fire HD is not setup for Xposed yet. There is no bootloader access yet therefore there is no way to recover yet. You have two options at this point. Wait until there is a bootloader exploit or contact Amazon for an exchange.
The only things available are root, remove OTA updates and remove lock screen ads. Even Google Play is only for window shopping at the moment.
Sent from my Nexus 7 Flo running Odex SinLess ROM 4.4.2 with ElementalX kernel using XDA Premium 4 mobile app
Click to expand...
Click to collapse
For anyone wondering, xposed actually works perfectly with a good number of modules, but don't install Xthemeengine, that'll cause the bootloop.
Fastboot
As long as you can boot into fastboot-mode nothing is lost. (if you can't -> buy a fastboot-cable. it is much cheaper than a new Kindle. They cost about 15$).
I used this useful tool. It just flashes the old system, boot and recovery on your Kindle. (all files are included in the downloadable zip file).
This tool was very useful for me and saved my Kindle very often (I am a real flashoholic...). Maybe there is something like this for the new 2013 KFHD too?
Gamingmayr said:
As long as you can boot into fastboot-mode nothing is lost. (if you can't -> buy a fastboot-cable. it is much cheaper than a new Kindle. They cost about 15$).
I used this useful tool. It just flashes the old system, boot and recovery on your Kindle. (all files are included in the downloadable zip file).
This tool was very useful for me and saved my Kindle very often (I am a real flashoholic...). Maybe there is something like this for the new 2013 KFHD too?
Click to expand...
Click to collapse
Nah nothing so far for the 2013 unfortunately. I don't think there's been much interest in this model as of yet.
Hyperiunn said:
Nah nothing so far for the 2013 unfortunately. I don't think there's been much interest in this model as of yet.
Click to expand...
Click to collapse
I've been interested. Unfortunately, my mother won't let me touch her new 2013 Fire HD. Still, if you can find someone who's rooted and not bricked, maybe they could backup their boot, system, and recovery .imgs for you and post them for you. And since they're already rooted, you would be too (someone correct me if I'm wrong). If I could get a temporary root or find a way to remove root later I would back them up for you.
The system restore tool for the 2012 Fire HD flashes the boot, recovery, and system partitions. Theoretically, the same tool would work, but only if you replaced the .img files with the ones for the 2013 Fire HD.
Gamingmayr said:
As long as you can boot into fastboot-mode nothing is lost. (if you can't -> buy a fastboot-cable. it is much cheaper than a new Kindle. They cost about 15$).
I used this useful tool. It just flashes the old system, boot and recovery on your Kindle. (all files are included in the downloadable zip file).
This tool was very useful for me and saved my Kindle very often (I am a real flashoholic...). Maybe there is something like this for the new 2013 KFHD too?
Click to expand...
Click to collapse
There is no confirmation that a fastboot cord even works with the 2013 model nor are the stock images available yet. The 2012 KFHD and the 2013 KFHD do not use the same images.
---------- Post added at 11:28 PM ---------- Previous post was at 11:26 PM ----------
Hyperiunn said:
For anyone wondering, xposed actually works perfectly with a good number of modules, but don't install Xthemeengine, that'll cause the bootloop.
Click to expand...
Click to collapse
It won't work on the 2013 Kindle fire HD yet though. Since that is the topic here I guess that narrows it down to this tablet not all the others don't it.
Fastboot cable works just fine with the one I have.
Hey everyone I totally screwed up my new KFHD and I would love some help. I tried to root it a couple days ago with the KFSOWI all in one tool and it seemed to work for a few minutes. SuperSU installed correctly and installed its binary but when I tried to use the root explorer in ES File Explorer it said that it failed so I opened up SuperSU again and it told me it needed to install the binary again as if it wasn't rooted. It failed to install it and Root Checker told me it wasn't rooted so I tried to re-root it with the same KFSOWI tool.
This is when it got messed up. The tool said it rooted successfully again but when I tried to boot it up normally (I had been using a factory cable to get into Fastboot) it got stuck on the Kindle Fire logo screen (the white one not the orange one). I thought maybe it was a problem with the root so I tried to unroot it with another tool and ever since then it briefly shows a red screen at boot and then stays on the Fastboot logo. I've tried holding the power button down for 20 seconds, restoring the firmware to stock (got an error about system.img saying that it wasn't a sparse file), and restoring to an older firmware. None of this has made any difference.
I read somewhere that the red screen is a sign of a missing bootloader but if that's true how do I get back to the stock bootloader? I had 11.3.2.2/7.4.8 installed before all this happened if that helps. I'm willing to try anything at this point. I would like to at least be able to use the Play Store but if I have to stick to stock FireOS I'll just endure it. If you have any questions ask away! Thank you all for your help.
pgautraud said:
Hey everyone I totally screwed up my new KFHD and I would love some help. I tried to root it a couple days ago with the KFSOWI all in one tool and it seemed to work for a few minutes. SuperSU installed correctly and installed its binary but when I tried to use the root explorer in ES File Explorer it said that it failed so I opened up SuperSU again and it told me it needed to install the binary again as if it wasn't rooted. It failed to install it and Root Checker told me it wasn't rooted so I tried to re-root it with the same KFSOWI tool.
This is when it got messed up. The tool said it rooted successfully again but when I tried to boot it up normally (I had been using a factory cable to get into Fastboot) it got stuck on the Kindle Fire logo screen (the white one not the orange one). I thought maybe it was a problem with the root so I tried to unroot it with another tool and ever since then it briefly shows a red screen at boot and then stays on the Fastboot logo. I've tried holding the power button down for 20 seconds, restoring the firmware to stock (got an error about system.img saying that it wasn't a sparse file), and restoring to an older firmware. None of this has made any difference.
I read somewhere that the red screen is a sign of a missing bootloader but if that's true how do I get back to the stock bootloader? I had 11.3.2.2/7.4.8 installed before all this happened if that helps. I'm willing to try anything at this point. I would like to at least be able to use the Play Store but if I have to stick to stock FireOS I'll just endure it. If you have any questions ask away! Thank you all for your help.
Click to expand...
Click to collapse
ok first ting i wanna ask is what do you mean 11.3.2/7.4.8, because 11.x.x is for teh 2013 and 7.x.x is for teh 2012 kindle. Also red screen doesnt mean you are missing the bootloader, if you were missing that the device wouldnt even turn on. That error you got when trying to restore the device is probably part of why its not working, probably need to fix that to fix the device, it never reflashed the system partition when it errored and said that the image was not sparse, which is a bit odd in itself considering how the method we use to fix it works.
stunts513 said:
ok first ting i wanna ask is what do you mean 11.3.2/7.4.8, because 11.x.x is for teh 2013 and 7.x.x is for teh 2012 kindle. Also red screen doesnt mean you are missing the bootloader, if you were missing that the device wouldnt even turn on. That error you got when trying to restore the device is probably part of why its not working, probably need to fix that to fix the device, it never reflashed the system partition when it errored and said that the image was not sparse, which is a bit odd in itself considering how the method we use to fix it works.
Click to expand...
Click to collapse
I have the 2013 version, I just bought it from Amazon two weeks ago and it said the firmware version was 11.3.2.2. I had said 7.4.8 because whenever I searched for a way to root 11.3.2.2 the most recent information I could find talked about 7.4.8 so I thought they were the same thing. So is there a way for me to sparse the system image? Or are there system images out there that are sparsed? If you have a tool that you prefer over others I would love to try it.
Try this, I think this was the thread I was looking for and if its the same one you posted a link to then my bad because I'm half asleep.
Sent from my Amazon Kindle Fire HD using Tapatalk
stunts513 said:
Try this, I think this was the thread I was looking for and if its the same one you posted a link to then my bad because I'm half asleep.
Sent from my Amazon Kindle Fire HD using Tapatalk
Click to expand...
Click to collapse
What am I supposed to try?
Wow I was half asleep after all I didn't post the link... Lemme get my bearings and retrace my line of though.
Edit: here's the link I was intending on posting: http://forum.xda-developers.com/showthread.php?t=2685090
Weird thing is i remember copying the URL for the thread, Idk why I never pasted it.
Sent from my Amazon Kindle Fire HD using Tapatalk
stunts513 said:
Wow I was half asleep after all I didn't post the link... Lemme get my bearings and retrace my line of though.
Edit: here's the link I was intending on posting: http://forum.xda-developers.com/showthread.php?t=2685090
Weird thing is i remember copying the URL for the thread, Idk why I never pasted it.
Sent from my Amazon Kindle Fire HD using Tapatalk
Click to expand...
Click to collapse
Thanks for the link! I actually tried the newest version of his tool and it works up until it says "waiting for boot..." I assume it means it's waiting for a normal boot but since I can't get it to boot past the Fastboot logo (even with a normal cable or no cable at all) it never gets any further. Any suggestions?
Sounds like the bootimg needs to be reflashed. Sometimes a bad bootimg causes it to kick into fastboot upon boot.
Sent from my Amazon Kindle Fire HD using Tapatalk
Hello and thanks for reading!
I have a Kindle Fire 5th Gen that was just given to me. I'd like to get rid of the Amazon OS and install anything (I'll take CM or whatever). It is currently running 5.1.2 yet KingRoot v4.9.2 says it is 5.1.1.
I've tried KingRoot a few times (apparently you need root to get TWRP going) and nothing happens - it keeps failing.
I've gone through some RootJunky videos but those aren't updated for 5.1.2 via Windows.
I'm at a loss of what to do next. This video says that installing an old version of Fire OS will brick your Kindle.
All of these different threads have me confused.
My questions are:
I understand that TWRP doesn't work on 5.1.2, so how do I get to a different version of Fire OS? And how do I disable OTA's? Turn off Wifi?
When I get to a different version of Fire OS, will RootJunky's tools work like in his videos?
I apologize if this is already answered in another thread as I can't find it and am new to the Kindle Fire.
I'd like to be able to use it for my school books next semester instead of having to bring the big effin things back and forth. For $50 bucks (retail), this seems like a steal to get a vanilla version of Android running on it!
Thanks in advance!
Pcprik said:
Hello and thanks for reading!
I have a Kindle Fire 5th Gen that was just given to me. I'd like to get rid of the Amazon OS and install anything (I'll take CM or whatever). It is currently running 5.1.2 yet KingRoot v4.9.2 says it is 5.1.1.
I've tried KingRoot a few times (apparently you need root to get TWRP going) and nothing happens - it keeps failing.
I've gone through some RootJunky videos but those aren't updated for 5.1.2 via Windows.
I'm at a loss of what to do next. This video says that installing an old version of Fire OS will brick your Kindle.
All of these different threads have me confused.
My questions are:
I understand that TWRP doesn't work on 5.1.2, so how do I get to a different version of Fire OS? And how do I disable OTA's? Turn off Wifi?
When I get to a different version of Fire OS, will RootJunky's tools work like in his videos?
I apologize if this is already answered in another thread as I can't find it and am new to the Kindle Fire.
I'd like to be able to use it for my school books next semester instead of having to bring the big effin things back and forth. For $50 bucks (retail), this seems like a steal to get a vanilla version of Android running on it!
Thanks in advance!
Click to expand...
Click to collapse
- although your device shows 5.1.2 it is likely running 5.1.2.1 which can not be rooted at present
- you need to reload (sideload) 'pure' 5.1.2 via the stock recovery menu; there are instructions and videos posted elsewhere in this forum
- once on 5.1.2 use the SuperTool to root, block OTA, swap out Kinguser for SuperSU and obtain FlashFire which is used to install custom roms
- TWRP is not an option for your device at this time (nor is it likely in the near future)
- suggest looking through the index for relevant material (link below)
- keep reading; you'll get the hang of it
http://forum.xda-developers.com/amazon-fire/general/index-amazon-fire-2015-t3210485
Davey126 said:
- although your device shows 5.1.2 it is likely running 5.1.2.1 which can not be rooted at present
- you need to reload (sideload) 'pure' 5.1.2 via the stock recovery menu; there are instructions and videos posted elsewhere in this forum
- once on 5.1.2 use the SuperTool to root, block OTA, swap out Kinguser for SuperSU and obtain FlashFire which is used to install custom roms
- TWRP is not an option for your device at this time (nor is it likely in the near future)
- suggest looking through the index for relevant material (link below)
- keep reading; you'll get the hang of it
http://forum.xda-developers.com/amazon-fire/general/index-amazon-fire-2015-t3210485
Click to expand...
Click to collapse
Thanks!
I may have hit a 'small' snag though. When I put 5.1.2 from the Index page on, Kingroot still didn't work so I put the next oldest version on (5.1.1 I believe). Now it won't startup and just has a black screen - I believe I forgot to select wipe cache before restarting. When I plug it into my Surface, Device Manager keeps making noises and I have installed the MTK VCOM drivers. I'm going to try to put 5.1.2.1 back on but I'm wondering if this thing is actually bricked? According to this thread it's possible to 'unbrick' it but if it doesn't turn on, how does it get into recovery mode?! Perhaps it's in recovery mode now with the blank screen? When I do 'adb devices', nothing shows up so I'm guessing it's not connected? Even doing 'adb sideload <filename>' shows no devices connected.
Thanks again!
Pcprik said:
Thanks!
I may have hit a 'small' snag though. When I put 5.1.2 from the Index page on, Kingroot still didn't work so I put the next oldest version on (5.1.1 I believe). Now it won't startup and just has a black screen - I believe I forgot to select wipe cache before restarting. When I plug it into my Surface, Device Manager keeps making noises and I have installed the MTK VCOM drivers. I'm going to try to put 5.1.2.1 back on but I'm wondering if this thing is actually bricked? According to this thread it's possible to 'unbrick' it but if it doesn't turn on, how does it get into recovery mode?! Perhaps it's in recovery mode now with the blank screen? When I do 'adb devices', nothing shows up so I'm guessing it's not connected? Even doing 'adb sideload <filename>' shows no devices connected.
Thanks again!
Click to expand...
Click to collapse
Your device is bricked; can't roll back to 5.1.1 from any higher version of FireOS. Contact Amazon for a one-time courtesy exchange if still in warranty.
Unbrick methods are technically complex and still evolving; not for the faint of heart. Also don't believe your device is eligible.
Davey126 said:
Your device is bricked; can't roll back to 5.1.1 from any higher version of FireOS. Contact Amazon for a one-time courtesy exchange if still in warranty.
Unbrick methods are technically complex and still evolving; not for the faint of heart. Also don't believe your device is eligible.
Click to expand...
Click to collapse
That's what I thought.
Thanks again for your help!
Davey126 said:
Your device is bricked; can't roll back to 5.1.1 from any higher version of FireOS. Contact Amazon for a one-time courtesy exchange if still in warranty.
Unbrick methods are technically complex and still evolving; not for the faint of heart. Also don't believe your device is eligible.
Click to expand...
Click to collapse
Just to confirm, I should have put 5.1.2 and then rooted, correct? I may buy a new one.
Pcprik said:
Just to confirm, I should have put 5.1.2 and then rooted, correct? I may buy a new one.
Click to expand...
Click to collapse
Correct. Summary here; see index for more robust coverage.
Hi all
I've just bought a Fire Tablet on Amazon day with the intention of rooting it and installing CM, but I am a newbie and there's so much information on here it's kind of overwhelming, and most of it has a lot of "if this, then that, or if you want to use that, do this" type guides, which for someones who doesn't really know what all the different methods and options are is really confusing!
So can someone please tell me the step by step process for doing it?
From what I've read I think I have to downgrade to 5.1.2 of the OS as I can't root on 5.1.4? Is that correct?
So do I have to root before I do that? Or do I downgrade first and then root, and then install the CM?
If someone can list each of the steps I need to take to get it from a fresh new 5th Gen Fire 7 to having all the Amazon rubbish off and having it running CM, then I can look for the guides for each step!
Thanks, I hope that makes sense!
:angel:
PS: I've already bricked one by trying to downgrade to 5.1.1 because that wasn't apparent until it was too late, replacement on its way!
Yeah, I read the same thing and I bought it on Prime day. When's the 5.14 tool going to come out? I know, beggars... I really think it's silly to have to downgrade and risk bricking it when normal root for those OS versions don't have such a concern.
Bob Boblaw said:
Hi all
I've just bought a Fire Tablet on Amazon day with the intention of rooting it and installing CM, but I am a newbie and there's so much information on here it's kind of overwhelming, and most of it has a lot of "if this, then that, or if you want to use that, do this" type guides, which for someones who doesn't really know what all the different methods and options are is really confusing!
So can someone please tell me the step by step process for doing it?
From what I've read I think I have to downgrade to 5.1.2 of the OS as I can't root on 5.1.4? Is that correct?
So do I have to root before I do that? Or do I downgrade first and then root, and then install the CM?
If someone can list each of the steps I need to take to get it from a fresh new 5th Gen Fire 7 to having all the Amazon rubbish off and having it running CM, then I can look for the guides for each step!
Thanks, I hope that makes sense!
:angel:
PS: I've already bricked one by trying to downgrade to 5.1.1 because that wasn't apparent until it was too late, replacement on its way!
Click to expand...
Click to collapse
I did the same thing, bought the tablet on prime day and was successfully able to root it and put the AOSP nexus rom
First things first make sure you have the 7-inch tablet for the following steps because apparently it only works with that specific model. Since this is my first post I can't post any links so sorry about that however, I have added the video title so that you can just google it and find the video.
Anything above fire os 5.1.2 ( that is 5.1.4, 5.1.3, 5.1.2.1) has to be downgraded to 5.1.2.
Also downgrading from 5.1.4 to 5.1.1 is going to give you a hard brick. I don't know how you didn't know that but it was clearly stated in the xda guide I was following
Basically you have to follow rootjunkys video and instead of using the file he uses in the video use the fire OS 5.1.2 file which is also available on his website.
Imortant: Do a factory reset before downgrading. I did not do that and the rooting process did not work.
Video title: How to Firmware Restore or Unbrick your Amazon Fire 5th gen Tablet
After you have fire OS 5.1.2 follow the rooting process shown in another rootjunky video
Video title: How to root the Amazon Fire 5th gen 7in on Fire OS 5 1 2 SuperTool Mac linux and Windows
Note: He shows how to do the whole process while using mac but it can be done on windows awell and the windows files are already present. Instead of using the .sh file and opening the terminal double click the .bat file and follow along.
You can use his SuperTool to put the play store app and fire flash app.
Note: For some reason fire flash was not working properly for me by using the SuperTool, so I just installed it from the google play store.
Now you should have rooted fire OS 5.1.2 along with superSU. Now with the fire flash app and you can download any rom that you want to flash. Follow the steps in the video for instructions
Video title: Amazon Fire 5th gen AOSP Nexus rom install with Flash Fire app
Hope this helps.
All credit to rootjunky
erikthebikeman said:
Yeah, I read the same thing and I bought it on Prime day. When's the 5.14 tool going to come out? I know, beggars... I really think it's silly to have to downgrade and risk bricking it when normal root for those OS versions don't have such a concern.
Click to expand...
Click to collapse
It's not a matter of someone getting off their keister and whipping up a "tool" (presumably you are talking about root) that works with FireOS 5.1.4 or whatever the latest version is. Like many manufactures Amazon actively discourages rooting devices and attempt to block known exploits. It's a cat and mouse game. We may see a "tool" soon, much further down the road or never. Be happy you can root the device at all and be thankful for the individuals who unselfishly share their time and talents with the community.
Thanks nefarian.
The problem was that the guide I was referred to for getting CM onto it already assumed it had been rooted, and when I started googling and looking on the different guides on rootjunky there were so many coming from different angles but nothing giving the clear start to end steps for what I wanted to do, for a newbie it was very confusing. Plus in the guide I was following (a rootjunky one) he had an older version of the OS and the toolkit had different files/folders to what are in it now, so I guess at that time there was no mentioned of 5.1.4 and not being able to go back.
After thinking I needed to downgrade the OS I found the one for unbrinking and downgrading and did that fine to 5.1.2, but then when I tried the superkit it still said it was too new, so I tried to downgrade further, which is when I bricked it.
There was no mention of it on the video..... other than a bloody great overlay in the corner, which must have been added later on, and probably because I was tearing my hair out and getting confused I didn't spot it. That's my excuse anyway!
Thanks for your help, I'll have a go with the new one on Monday. So instead of trying to find an all in one guide, I need to find guide for the steps in this order;
1 - do a factory reset on the device (from the device settings, or do I need to do it in the bootloader settings?)
2 -downgrade to 5.1.2 (I should be able to do this now)
3 - root the device (and install supersu?)
4 - install CM
Then it should have full CM and none of the Amazon OS left.
I'm not missing any steps there am I?
Thanks again!
Bob Boblaw said:
Thanks nefarian.
The problem was that the guide I was referred to for getting CM onto it already assumed it had been rooted, and when I started googling and looking on the different guides on rootjunky there were so many coming from different angles but nothing giving the clear start to end steps for what I wanted to do, for a newbie it was very confusing. Plus in the guide I was following (a rootjunky one) he had an older version of the OS and the toolkit had different files/folders to what are in it now, so I guess at that time there was no mentioned of 5.1.4 and not being able to go back.
After thinking I needed to downgrade the OS I found the one for unbrinking and downgrading and did that fine to 5.1.2, but then when I tried the superkit it still said it was too new, so I tried to downgrade further, which is when I bricked it.
There was no mention of it on the video..... other than a bloody great overlay in the corner, which must have been added later on, and probably because I was tearing my hair out and getting confused I didn't spot it. That's my excuse anyway!
Thanks for your help, I'll have a go with the new one on Monday. So instead of trying to find an all in one guide, I need to find guide for the steps in this order;
1 - do a factory reset on the device (from the device settings, or do I need to do it in the bootloader settings?)
2 -downgrade to 5.1.2 (I should be able to do this now)
3 - root the device (and install supersu?)
4 - install CM
Then it should have full CM and none of the Amazon OS left.
I'm not missing any steps there am I?
Thanks again!
Click to expand...
Click to collapse
- no need for a factory reset at any point; offers no benefit for what you are trying to accomplish.
- installation of SuperSU (replacing Kinguser and related Kingroot cruft) after rooting is highly recommended prior to using FlashFire or any other tool that messes with the system partition. The SuperTool can facilitate this otherwise ugly task.
- if you are struggling with RootJunky videos you should give serious consideration to the challenges of installing a custom rom. It doesn't get any easier going forward.
Thanks. I managed to root my Nvidia Shield TV fine so I should be able to do it, I just needed to be clear of the full process from start to finish, and as I wasn't starting from the beginning of the process that made it more confusing. The rootjunky videos are great, but when someone is saying you can use this or that or do this or that it's putting choices and variables in to the mix so it's not a straighforward step by step, and when the kits and the webpages shown on the videos have changed since they were made, for someone trying to piece the info together it takes a bit more time.
Maybe I should point out that I didn't look on here initially when I started trying to do it, I basically saw the fire on offer mentioned on a forum I use and someone said yeah, it's easy to root and get CM on if, just user this video, with the link to a rootjunky YouTube video which didn't mention the prerequisite of already having downgraded the OS (why would it) so in hindsight I didn't start at the right place or have the best information.
After reading through some stuff on here (and that's over whelming for a first timer as there is so much stuff on here for many, many devices and platforms - even just finding the Amazon fire sub forum on an iPad wasn't easy!) I'm getting a better idea for attempt two.
I'll get there, and at least I know how to not brick it now! :good:
OK, so making progress. I have downgraded the new one fine, it now has 5.1.2 of the Fire OS.
I've used rootjunkys supertool to root the device with Kingmaker, which then installed SuperSU, and I finally uninstalled Kingmaker/Purity.
So I now have a rooted Fire, which is great. I have also installed the Google Play store, disabled OTA updates and removed ads from the lock screen. But I don't want the Amazon OS on it (pretty fugly isn't it!), so the next step, flashing it with CM.
What guide would be best for a Fire with 5.1.2 on it? When I look at the Rootjunkys guide for installing CM on the Fire (https://www.youtube.com/watch?v=4dwguHoxTvo&feature=youtu.be) the super tool kit does differ, and the one I downloaded from his link only has the tool for doing it for OS 5.0.1, so it won't let me boot into TWRP recovery. What would be the best tools/guide/method to use for installing CM onto a Fire with 5.1.2?
Thanks
Bob Boblaw said:
OK, so making progress. I have downgraded the new one fine, it now has 5.1.2 of the Fire OS.
I've used rootjunkys supertool to root the device with Kingmaker, which then installed SuperSU, and I finally uninstalled Kingmaker/Purity.
So I now have a rooted Fire, which is great. I have also installed the Google Play store, disabled OTA updates and removed ads from the lock screen. But I don't want the Amazon OS on it (pretty fugly isn't it!), so the next step, flashing it with CM.
What guide would be best for a Fire with 5.1.2 on it? When I look at the Rootjunkys guide for installing CM on the Fire (
&feature=youtu.be) the super tool kit does differ, and the one I downloaded from his link only has the tool for doing it for OS 5.0.1, so it won't let me boot into TWRP recovery. What would be the best tools/guide/method to use for installing CM onto a Fire with 5.1.2?
Thanks
Click to expand...
Click to collapse
- Kingroot/Purify, not Kingmaker/Purity
- I can't think of a better suite of guides than the videos produced by RootJunky
- use FlashFire 0.51 to install (flash) the rom of your choice
- OP for Nexus rom has video link and and basic FlashFire guidance
- get over the minor variations in the language/tools used to support this device between the making of videos and the latest release.
Bob Boblaw said:
OK, so making progress. I have downgraded the new one fine, it now has 5.1.2 of the Fire OS.
I've used rootjunkys supertool to root the device with Kingmaker, which then installed SuperSU, and I finally uninstalled Kingmaker/Purity.
So I now have a rooted Fire, which is great. I have also installed the Google Play store, disabled OTA updates and removed ads from the lock screen. But I don't want the Amazon OS on it (pretty fugly isn't it!), so the next step, flashing it with CM.
What guide would be best for a Fire with 5.1.2 on it? When I look at the Rootjunkys guide for installing CM on the Fire (https://www.youtube.com/watch?v=4dwguHoxTvo&feature=youtu.be) the super tool kit does differ, and the one I downloaded from his link only has the tool for doing it for OS 5.0.1, so it won't let me boot into TWRP recovery. What would be the best tools/guide/method to use for installing CM onto a Fire with 5.1.2?
Thanks
Click to expand...
Click to collapse
1. Get the CM rom and put it in the tablet from here: http://forum.xda-developers.com/amazon-fire/orig-development/rom-cm-12-1-2015-11-15-t3249416
2. Install FlashFire 0.51 from play store or use the SuperTool
3. Follow the video instructions and instead of the nexus rom use the CM rom you downloaded:
Thanks guys. All going well. CM12 is now installed using that Nexus guide. However, because he used Nexus the Play store was installed by default, which CM12 doesn't have.
Looking here - https://wiki.cyanogenmod.org/w/Google_Apps#Installation - I need to download Google Apps and install it, but which package for the Fire 7 5th gen? There are a number of variants to choose from. Looks like using twrp it would have been a pico one, but as it's a new OS a different one is needed?
So it's ARM device, Android 5.1 and Nano variant?
That gives me a zip file, but I can't work out how to install it. The videos I've found all have it as being installed as part of the OS installation via twrp. Should I have installed gapps when I installed the CM12.1 OS, or can I still install it later?
When I go into the boot menu the only install option is to apply update from ADB, wipe data/factory reset, wipe cache partition, reboot to bootloader or power down/reboot.
I tried to use apply update from ADB and did "adb sideload gapps-filename.zip" but it failed to complete the install and went back to the boot menu.
What do I need to do to get Play Store on there?
Thanks again
Bob Boblaw said:
Thanks guys. All going well. CM12 is now installed using that Nexus guide. However, because he used Nexus the Play store was installed by default, which CM12 doesn't have.
Looking here - https://wiki.cyanogenmod.org/w/Google_Apps#Installation - I need to download Google Apps and install it, but which package for the Fire 7 5th gen? There are a number of variants to choose from. Looks like using twrp it would have been a pico one, but as it's a new OS a different one is needed?
So it's ARM device, Android 5.1 and Nano variant?
That gives me a zip file, but I can't work out how to install it. The videos I've found all have it as being installed as part of the OS installation via twrp. Should I have installed gapps when I installed the CM12.1 OS, or can I still install it later?
When I go into the boot menu the only install option is to apply update from ADB, wipe data/factory reset, wipe cache partition, reboot to bootloader or power down/reboot.
I tried to use apply update from ADB and did "adb sideload gapps-filename.zip" but it failed to complete the install and went back to the boot menu.
What do I need to do to get Play Store on there?
Thanks again
Click to expand...
Click to collapse
Reinstall FlashFire 0.51 (here) on CM 12.1 then use it to flash the GAapps package. Agree with your selection: ARM/5.1/nano.
Ah, great, thank you, yep, that's got it on there.
Excellent! All modded and running very quickly! Thanks for the help guys, I appreciate the patience.
Not much space on these Fire's is there, it's already telling me it's low on space and I've only installed MediaMonkey!
Two more quick questions and I'll leave you alone....!
Is it possible to have the SD card to be used as combined storage? For example, my Shield TV lets me 'add' the SD card to the main storage so it sees it all as one instead of a second removable device, so can install apps on it, etc. If this possible with Cyanogenmod? (Not sure what you'd call that feature to search for it!) Thankfully the main reason I bought it was to help manage my music with MediaMonkey so I won't be installing lots on it, but if it is possible it would be useful.
Second, with regard to OS updates on CM, are they automated or do they need to be done manually (and, if so, with care?)
Thanks again!
Bob Boblaw said:
Two more quick questions and I'll leave you alone....!
Is it possible to have the SD card to be used as combined storage?
Second, with regard to OS updates on CM, are they automated or do they need to be done manually ...
Click to expand...
Click to collapse
Short answer: 'yes'. There are various approaches to utilizing SD cards for app installation/storage each with pros, cons and compromises. I highly recommend using a tool that leverages 'symbolic links' which is by far the most reliable method. An example is Link2SD which you can find in the Play Store.
All custom roms for this device are updated manually via FlaahFire or TWRP (if available). Instructions can usually be found in the OP.
@Bob Boblaw
did you open up the file manager and install the flashfire.apk? I am on the same problem you had on your post #11, but my problem I ran into now is flash fire says "root access could not be acquired" otherwise this would be a easy to do.
I think I might have to reinstall everything and start over. >_<
Yes, I copied it over via USB and installed it from the file manager. Do you have root enabled in the developer settings, I enabled it for adb and apps.
Bob Boblaw said:
Yes, I copied it over via USB and installed it from the file manager. Do you have root enabled in the developer settings, I enabled it for adb and apps.
Click to expand...
Click to collapse
Yes! Thank you, that is what I had missed plus I didn't reboot my device so took like 15mins trying to figure out why it wasn't still working.
Glad you got it working ! :good:
Great post guys!! I am getting ready to root my fire OS 5.1.4 and this helps me greatly! Been searching for a downgrade guide and this is it! Have one question is Cm only recovery program or is there a TWRP version for this ? I would think that lastest TWRP would work since its all android but have to ask .I like TWRP myself cause i have it on rooted tablets
thunderman98 said:
Great post guys!! I am getting ready to root my fire OS 5.1.4 and this helps me greatly! Been searching for a downgrade guide and this is it! Have one question is Cm only recovery program or is there a TWRP version for this ? I would think that lastest TWRP would work since its all android but have to ask .I like TWRP myself cause i have it on rooted tablets
Click to expand...
Click to collapse
You can not boot/install/use twrp on this device unless running FireOS 5.0.1 or lower. Nor can you rollback to any version below 5.1.2 without bricking the device. FlashFire is the tool of choice for installing roms and performing other maintenance tasks that are typically done in a custom recovery environment.
I have a kindle fire that used to belong to my brother and he had it rooted. I did a factory reset and upon registering the kindle it throws me into a language selection loop. I can still manage to get into apps, settings, etc.. if I click fast enough before the language selection pops up again. I'm assuming this is happening because it is rooted and I deleted files that were needed with the factory reset. I believe it's a 3rd gen kindle but I don't know how to be sure. Current version is 13.3.2.3.2_user_323001720 Build date Sunday, June 1, 2014. I prefer it to be unrooted for a fresh start but if it's easier to get past that error loop I'll take it. Can anyone help me with this please?
prisonmike1021 said:
I have a kindle fire that used to belong to my brother and he had it rooted. I did a factory reset and upon registering the kindle it throws me into a language selection loop. I can still manage to get into apps, settings, etc.. if I click fast enough before the language selection pops up again. I'm assuming this is happening because it is rooted and I deleted files that were needed with the factory reset. I believe it's a 3rd gen kindle but I don't know how to be sure. Current version is 13.3.2.3.2_user_323001720 Build date Sunday, June 1, 2014. I prefer it to be unrooted for a fresh start but if it's easier to get past that error loop I'll take it. Can anyone help me with this please?
Click to expand...
Click to collapse
Sounds like you may have a 3rd gen HDX. You'll need to identify the exact model as recovery procedures differ among the various fire devices.
Bumping this to see if I can get any help on it. I have decided to try again after finding my tablet. The tablet is a Kindle Fire HDX 7 3rd gen. After researching for a while I found out my brother rooted it using SuperSU as there's an su file under system/xbin (my brother doesn't remember anything) but no SuperSU app installed due to the factory reset. I was able to solve the language selection loop error but now I'm stuck on what to do next. Some apps work some don't. I just want to be able to use newer apps/games. Would you guys recommend trying to unroot or can I update current root to something not stuck in a 2014 update?
prisonmike1021 said:
Bumping this to see if I can get any help on it. I have decided to try again after finding my tablet. The tablet is a Kindle Fire HDX 7 3rd gen. After researching for a while I found out my brother rooted it using SuperSU as there's an su file under system/xbin (my brother doesn't remember anything) but no SuperSU app installed due to the factory reset. I was able to solve the language selection loop error but now I'm stuck on what to do next. Some apps work some don't. I just want to be able to use newer apps/games. Would you guys recommend trying to unroot or can I update current root to something not stuck in a 2014 update?
Click to expand...
Click to collapse
I would suggest go to amazon and download the full update. Also there is a hdx thread that might be more relevant. I do not have one of these devices and this thread is for the fire 7. See the next post...
Thanks @DB126
Here is a link to the amazon files
https://www.amazon.com/gp/help/customer/display.html?nodeId=G2JXLC4L34GX73TE
Here is a link the the HDX thread
https://forum.xda-developers.com/kindle-fire-hdx/orig-development
Michajin said:
I would suggest go to amazon and download the full update. Install the update. Also there is a hdx thread that might be more relevant. I do not have one of these devices and this thread is for the fire 7. ADB sideload should do the trick to get back to stock if you do not know what has been done to it.
Here is a link to the amazon files
https://www.amazon.com/gp/help/customer/display.html?nodeId=G2JXLC4L34GX73TE
Here is a link the the HDX thread
https://forum.xda-developers.com/kindle-fire-hdx/orig-development
Click to expand...
Click to collapse
Reloading FireOS (any build) is not an option on unrooted HDX device. Also rather dangerous without an understanding of compatible versions; a difficult to correct brick can easily result. Re-ask your question in the HDX help thread; someone (most likely me) will respond. You'll need to do a fair bit of work to restore that device including unlocking the bootloader and installing a custom ROM. Not for the faint of heart.
Thank you guys!