Hi guys,
So, I have been trying to install Viper4android on my Note 5 for over a month now.
Note that that this is not my first time to install, as I've first installed it on my Samsung S2 a long time ago.
My phone is on stock ROM, rooted, set to permissive by kernel, and Busybox Pro installed properly.
Every time I try to install V4A, it gives the following error:"Driver install failed. Please confirm your phone has been rooted and busybox installed". What am I missing?
The only thing that seemed to help, is flashing the zip file mentioned in the first step here: http://forum.xda-developers.com/tmobile-galaxy-note5/themes-apps/viper4android-note-5-t3192400
HOWEVER, it disables the Direct volume and BT Direct Volume in POWERAMP. Which makes the sound extremely distorted!!
I used to use V4A and the BT Direct Volume with no problems whatsoever, on my previous phones.. until now.
Note that I have flashed my stock ROM and rooted it so many times for this problem now, and it still persists. And it's driving me crazy!!!
I have read each and every article on the Internet regarding this problem, but almost all of them don't have any solution and dead articles.
And I never installed V4A XHIFI as well.
So, please developers, help me please!!
Related
Hi everyone, OK I've tried everything in other threads, here's the situation:
Note 4 Sprint
cf-auto-root worked fine, everything working well for a week (stock recovery, stock ROM, just root). Then installed xposed (accidentally used the experimental 2.7 version) and RootCloak module. This threw me into a boot loop.
I recovered from it by redoing cf-auto-root/odin. That got me out of the loop, but-
Ever since then:
- Phone lags for a few seconds every few seconds - making it hard to even type in a phone number, let alone watch a video,
- Fingerprint doesn't work - when launching the menu from settings I get an error that it's unavailable.
I've tried everything in the other threads:
- build.prop change (disabling securestorage)
- successfully installed 2.6 xposed and tried:
- wanam xposed to disable securestorage
- and the xsecurestorage module
- flashed stock rom from sammobile with odin
- even tried disabling selinux with wanam
No matter what, these same issues. I haven't tried anything other than the stock rom. Any ideas at all? Is there a different ROM out there I should try? Does that even have a chance of working?
I'm not sure I understand why flashing stock didn't fix it - even though it caused me to lose root...
Right now I have TWRP with root and stock ROM.
Any ideas or suggestions really appreciated.. I'm out of ideas. Thanks
I have the Same Problem
I had the same problem, haven't bothered installing it again since, don't suppose anyone has heard from the developers?
Hope maybe the devs can shed some light here. Is there anything else I can do? Flashing stock didn't even help. What's left?
So after not touching anything for about a week - things started running smoothly. Very odd - didn't change anything. Xposed was uninstalled for that time.
But, after SuperSU updated (and updated the binary/rebooted), the lag came back. So, this is telling me this may be related to root/SuperSU instead.
Hi everyone,
I am pretty new to rooting, flashing, modding etc.
My problem is as follows:
I am on Pie 10.0.1.0PDIMIFJ, upgraded to it thanks to a guide in this forum.
After upgrading (bootloader has been unlocked beforehand of course) I got root through patched boot.img and Magisk Manager.
I did this in order to be able to gain some everyday treats such as Youtube background playing and especially V4A.
I could install these modules via Magisk, but they do not seem to work.
V4A is asking for driver installation everytime I reboot my phone, and I have to reboot after every driver installation.
This happens independently from the version of Viper I am trying to install.
After installing Youtube Vanced nothing changes. Playing stops when closing the app while a video is turned on.
I also tried a couple of other modules but none seems to be working.
I read somewhere that this could be connected to "SELinux permissive" something . I am sorry, I do not really know what that's about but maybe someone out there could give me a hint as to where I have to look.
I do not need a guide or anything, don't mind learning something on the way
Help would be greatly appreciated.
Thank you guys in advance
Anyone?
Same/similar issue
I am also experiencing the same issue, was able to install Viper and pixel Camera mod, then after no matter what module I install it does not show up in the app drawer atleast, I tried App systemizer , Cloudfare DNS and SF font.. nothing seems to work than the first installed two modules. Tried to install and remove them multiple times.
Cleared magisk cache
installed M<agisk from TWRP multiple times.
tried to install modules from TWRP as well.
I am so new to all these, please dont mind any mistakes.
Thanks.
The same problem I got.How to do to enable camera 2api.
Hello somebody,
i am along time on xda, since samsung s2 and i am along time a best friend of root for the device.
The best opinions for me, supersu and twrp. I have root, and every time i can save a stable backup of my system with twrp. I running a very stable s8 with system-root via chainsfire supersu (chainsfire make a good work a long time). My s8 running android 7.0 and i didn't missing anything. I am big fan from samsung, so i buy a Samsung s10 (SM-G973F).
I have order the new phone from the beginning and it looks like a good phone (i am only missing the notification led from the older samsungs, but it is okay),
I Daley read the news about root and last week i also root my new phone with magisk (i would love to running twrp also, but for the s10 i know it is not stable at this time).
Now, my problems. I know with the new method of magisk, there are some problems like wlan and Bluetooth Connection. I never had this problems, because i make a full backup with samsung smart-switch and restore this with running firmware with magisk. I never run the patched firmware without root options, so i think, when i start the phone with the wrong combo, i can also have the problems.
I read, there is the libsecure_storage companion module for magisk, i have install it, but i dont understand the instruction..."after installing this modul, you may wish to edit /system/etc/......." When i really change anything on system, didn't broke me the safetynet?
Next problem, i am running on s8 airaudio with system-audio. On s10 there are only the options with microphone, so install the "air-audio" module frome magisk, but when i try to connect to my audio system, it shows me only an error, anybody have some solution?
Last of my problem, i am loving xposed and i know on magisk there are only edxposed, anybody have a good instruction how i can install edxposed on the s10?
Theres a lot of problems but i think it is not impossible to fix this. Sorry for my bad English, i am from germany.
Hi guys,
So i just bought a new N960F/DS and i`ve installed TWRP and rooted with magisk.
The reason why i`ve rooted is because i needed to install viper4android, however it doesn`t seem to work even though i`ve tried different versions, x-fi, legacy, from magisk, arise, divine beats and so on.
I keep on getting all yes to drivers, supported and so on, however, processing is always NO.
Any idea on why this is happening, what am i doing wrong, i also had a g950u which i rooted and v4a worked from the first try... this appears to be more stubborn.
Can anyone help?
Dorin8888 said:
Hi guys,
So i just bought a new N960F/DS and i`ve installed TWRP and rooted with magisk.
The reason why i`ve rooted is because i needed to install viper4android, however it doesn`t seem to work even though i`ve tried different versions, x-fi, legacy, from magisk, arise, divine beats and so on.
I keep on getting all yes to drivers, supported and so on, however, processing is always NO.
Any idea on why this is happening, what am i doing wrong, i also had a g950u which i rooted and v4a worked from the first try... this appears to be more stubborn.
Can anyone help?
Click to expand...
Click to collapse
Turn off Dolby Atmos
xda_lemar said:
Turn off Dolby Atmos
Click to expand...
Click to collapse
It was not on.
Any rom that contains v4a and drivers preloaded?
works fine here:
also when opening it for the first time, did u grant it permission to storage? might want to double check that.
Perhaps your kernel is not permissive?
I`ve installed the Divine version and i keep on being asked if i want to install the drivers, everytime i open it, it installs, i reboot, doesn`t work, and the same thing all over.
This seems to happen with several versions.
I`ve flashed the teamexykings rom, the exact same thing.... what am i doing wrong????
Hi guys. I need some help for my rooted galaxy note 8. I had rooted my phone a long ago and all was working good. All apps including banking apps were working fine with magisk hide. But few days ago i wanted to update my phone so i flashed stock rom with odin and updated my device. Earlier my bootloader version was 6 and now its updated to version 8. Then after updating i flashed latest twrp and rooted with magisk. I flashed magisk version 20.1 and magisk manager version was 7.4.0 . Then magisk update was available so i updated to magisk version 20.2 and magisk manager to version 7.5.0 . Now the problem starts. I am facing 3 issues.
1- my phone starts freezing and then reboots randomly. It happens quite frequently atleast 2-3 times in a day. Every time i clear cache partition from twrp but problem persists. I had checked ram also but ram useage is also fine. Please help me with this issue.
2- while searching for the solution of above problem i read somewhere that it might be because of safety net check. Earlier safetynet check was pass but now safety net check was fail. I flashed bypass safety net mod. But when my phone reboot a warning appears that your device has some internal problem. Contact the manufacturer. I pressed ok and phone starts. It seems to work normal but then i realised my device was not connecting to any wifi network. When i click on available wifi nothing happened. So i uninstalled the safety net bypass mod and then wifi start working again.
3- now final thing i want to know. If the above problem did not solve then i have to unroot my phone which i dont want. But if i had to then i dont want to flash stock rom. I want to unroot from magisk app itself. I had edited build.prop file for using samsung health app. So now if i unroot from magisk app will the changes made by me in build.prop file remain or it will revert back. Also will banking apps work or not....
I know its very lengthy post but please help
Wow...
70 views no comment..... it seems all the developers and tech people are enjoying winter break
Try going back to previous version of Magisk. I have Snapdragon N8 so I have supersu. But I did update my A20g with newest Magisk and had an issue. I know you have N8 but was just saying maybe could be new Magisk.
My SM-N950U Still Rooted Note 8