Related
im on the firmware c636b120 how i can update to c636b190 here is the link http://consumer.huawei.com/mm/support/products/downloads/p8lite-mm.htm
must i first update to c636b150a or c636b170 or not?
is the german language in this firmware?
thanks
Online-cw said:
im on the firmware c636b120 how i can update to c636b190 here is the link ..
must i first update to c636b150a or c636b170 or not?
is the german language in this firmware?
thanks
Click to expand...
Click to collapse
You can just jump to c636b190.
You need to download the file and extract the dload folder which contains the update.app file. Place the folder in the home direction in your phone's internal storage and then go to Settings > Updater > Menu > Local update.
All languages are supported in all roms.
One thing I'd like to ask is if this rom (c636b190) is android v5.0.2 or not.. Because my phone came with that one installed and I liked it pretty well, then decided to go for Marshmallow but I was disappointed by it and then got my device softbricked. Luckily, I had TWRP installed and I flashed a custom ROM. Now i reflashed the stock Huawei recovery and via ADB sideload I ended up with the first, stock Lollipop firmware (5.0)
If you have any other questions, I am here to answer because I have good experience in installing updates and flashing roms.
I can't get the rollback to work at all because I want to go back to lollipop to root and unlock bootloader but the error I get is at about 4% after it verifies then fails PLEASE HELP and I'll give likes and stuff
hello friends today i will share a method that i found on youtube how to switch from chinese to global firmware on Meizu Pro 7
all the credits are for Uncle MokuS
i just wanted to help people that is searching for it like me
so just follow the totorial - https://www.youtube.com/watch?v=aDp...5wdjofattwgksn3zi1jpw03c010c.1508299039136556
the totorial is in russian so if you have any doubt just read the coments in video discription
that method is different that the one that i use in my old mx5 by terminal emulator... i really would prefer the terminal emulator method because just change the phone and you can install any G firmware by flyme recovery and keep with ota updates and without the phone rooted (i dont want root because i use some apps that doesnt allow me use if i have root) but i didnt find a diferent mode yet i hope some one could show a diferent method like i did to mx5
everything works because its original firmware the only thing is that to next updates you´ll have to do by flashfire
anyway i hope you all enjoy G firmware
Hi, thanks for the good news.
Does anyone know whether this method also works with the Meizu Pro 7 PLUS?
The people in comments say that its not working
You can find an english Guide for the installation of the Global ROM on the chinese Meizu Pro 7 here:
https://www.china-phone.net/meizu-pro-7-global-rom-guide.html
Lost imei
I have lost my imei numbers and they become null.
Also i have lost root access after intalling the update.zip from flymeos.com. Because i cant login into meizu account after installing the update.zip,
it says ''invalid parameter ''.
Phone has locked bootlader. Cant flash anything..
Any suggestions ?
Dennis1311 said:
Hi, thanks for the good news.
Does anyone know whether this method also works with the Meizu Pro 7 PLUS?
Click to expand...
Click to collapse
I've got this one working for Pro 7 Plus, model M793Q:
1. Download Flyme 6.7.10.31 beta rom from official chinese Flyme site and put it to your phone's main folder
2. Enter Recovery mode (Volume Up + Power), select "Update firmware" and "Wipe data", then wait until the update is done
3. Download Flyme 6.1.2.0G rom from official site and also put it to your phone just like the chinese rom
4. Enter Recovery mode again and do the same things - select "Update firmware" and "Wipe data", then wait until the update is done
Thanks for your Method..It is working great on Meizu Pro 7 PLUS Model: M793H to :good:
T3Rm0 said:
I've got this one working for Pro 7 Plus, model M793Q:
1. Download Flyme 6.7.10.31 beta rom from official chinese Flyme site and put it to your phone's main folder
2. Enter Recovery mode (Volume Up + Power), select "Update firmware" and "Wipe data", then wait until the update is done
3. Download Flyme 6.1.2.0G rom from official site and also put it to your phone just like the chinese rom
4. Enter Recovery mode again and do the same things - select "Update firmware" and "Wipe data", then wait until the update is done
Click to expand...
Click to collapse
Just one thing you still have ota updates right?
im trying in my pro 7 (standard) and when i try to install the G firmware in recovery i got the message firmware corrupt do the people with pro 7 plus is lucky
its not working in the standard version i give up xD
1. I have still my ota updates on Meizu pro 7 plus with the global version that i recently update from A chinese firmware to beta chinese then to Global version.
2. You need to have the Chinese Beta version first on your phone to update to Global version.
3. You can download the chinese flyme firmware beta version from Meizufans. Search Meizufans on the Google.
4. Allways backup your Imei number so you can restore it. That is only if the Imei NR gets NULL.Best place to have your backup is PC.
5. Download the global version from the flymeos.com
6. It should work on the standard version because it has the beta version too.
Good Luck :good:
DiogoSepultura said:
Just one thing you still have ota updates right?
im trying in my pro 7 (standard) and when i try to install the G firmware in recovery i got the message firmware corrupt do the people with pro 7 plus is lucky
its not working in the standard version i give up xD
Click to expand...
Click to collapse
TedGok said:
1. I have still my ota updates on Meizu pro 7 plus with the global version that i recently update from A chinese firmware to beta chinese then to Global version.
2. You need to have the Chinese Beta version first on your phone to update to Global version.
3. You can download the chinese flyme firmware beta version from Meizufans. Search Meizufans on the Google.
4. Allways backup your Imei number so you can restore it. That is only if the Imei NR gets NULL.Best place to have your backup is PC.
5. Download the global version from the flymeos.com
6. It should work on the standard version because it has the beta version too.
Good Luck :good:
Click to expand...
Click to collapse
lets see...
so i download the firmwares from flyme websites (they are the same that we have in meizu fans) so i installed flyme 6.7.10.31 beta
after that i went to recovery and put the G firmware inside the phone main folder, the only G firmware version that pro7 standard has is 6.1.3.0
and in recovery i try to update and always say that the firmware is corrupt
DiogoSepultura said:
lets see...
so i download the firmwares from flyme websites (they are the same that we have in meizu fans) so i installed flyme 6.7.10.31 beta
after that i went to recovery and put the G firmware inside the phone main folder, the only G firmware version that pro7 standard has is 6.1.3.0
and in recovery i try to update and always say that the firmware is corrupt
Click to expand...
Click to collapse
Try to do this:
1. Get Root permissions in settings and download Root Explorer
2. Put Global rom into your main folder
3. Start Root Explorer, grant root permissions to him and go to /dev/block/platform/bootdevice/by-name
4. Open devinfo as text file and change it from 0x79101001 to 0x79151001, then save it
5. Open the standard Flyme explorer, click on your global rom and agree with wipe
I can't guarantee that it will work but if it won't nothing bad will happen - the phone will just reboot
T3Rm0 said:
Try to do this:
1. Get Root permissions in settings and download Root Explorer
2. Put Global rom into your main folder
3. Start Root Explorer, grant root permissions to him and go to /dev/block/platform/bootdevice/by-name
4. Open devinfo as text file and change it from 0x79101001 to 0x79151001, then save it
5. Open the standard Flyme explorer, click on your global rom and agree with wipe
I can't guarantee that it will work but if it won't nothing bad will happen - the phone will just reboot
Click to expand...
Click to collapse
Hello! But i have there not 0x79101001 in "devinfo" i have 0x79201001
How can i change?
best regards
peter
pmartin said:
Hello! But i have there not 0x79101001 in "devinfo" i have 0x79201001
How can i change?
best regards
peter
Click to expand...
Click to collapse
In that case change it to 0x79251001, "5" means european device
Do you have Pro 7 HE or something? I thought there are only 2 IDs:
PRO 7 Plus 0x79351001
PRO 7 0x79151001
T3Rm0 said:
In that case change it to 0x79251001, "5" means european device
Do you have Pro 7 HE or something? I thought there are only 2 IDs:
PRO 7 Plus 0x79351001
PRO 7 0x79151001
Click to expand...
Click to collapse
pmartin did you tried this already? let us know what happend
DiogoSepultura said:
pmartin did you tried this already? let us know what happend
Click to expand...
Click to collapse
I've already tried it on my Plus device and nothing happened
The problem is that the developer has made a protection against changing ID - there are several scripts named loop, so if you change ID in devinfo and reboot they will roll back the changes.
Also I've searched for previous scripts that were working on old meizu devices, there are several ways of doing that:
1. Rewrite devinfo by using unix commands - as I understood the program finds a sector where the ID is based and replaces it. The problem is that you need to know an exact binary address for the ID but I don't know how to disassemble .img files :<
2. Get devinfo straight from the same EU device and replace it - it's easier but I don't have an EU file (If someone has it please contact me)
3. Use flash tool to write the ID directly in chipset - the most dangerous way but I can't find binary files for Helio X30, and also you need to know an adress of ID
So the easiest and the most safe way is method 2, because even if something will go wrong you can just reinstall rom from recovery mode, but if someone here knows unix\assembler he can try to locate the ID, I have extracted devinfo file (it's still has chinese ID but I believe we can find a way out)
Hello!
At first i had to install the "beta"-Rom. Because i had installed the SuperSu and i am at the "bootloop".
I am back, i try the version.
regards
peter
T3Rm0 said:
In that case change it to 0x79251001, "5" means european device
Do you have Pro 7 HE or something? I thought there are only 2 IDs:
PRO 7 Plus 0x79351001
PRO 7 0x79151001
Click to expand...
Click to collapse
pmartin said:
Hello!
At first i had to install the "beta"-Rom. Because i had installed the SuperSu and i am at the "bootloop".
I am back, i try the version.
regards
peter
Click to expand...
Click to collapse
it work´d for you?
Hi
I just tried the devinfo method with no success, as stated before, it rolls back to it original stage, I even change the permissions of devinfo file with read and exwcute only, but the permissions Also rolls back
I purchased a meizu pro 7, spanish model(global model) And I will probably Return it since I purchased Also one meizu pro 7 plus, but if you want, I can accept it a few days in order to get the files needed from the European model.
Thanks!
kralde said:
Hi
I just tried the devinfo method with no success, as stated before, it rolls back to it original stage, I even change the permissions of devinfo file with read and exwcute only, but the permissions Also rolls back
I purchased a meizu pro 7, spanish model(global model) And I will probably Return it since I purchased Also one meizu pro 7 plus, but if you want, I can accept it a few days in order to get the files needed from the European model.
Thanks!
Click to expand...
Click to collapse
if you can just share the information mate, i praying for someone who understant about this crack this thing so we can all use global firmware in our phones
T3Rm0 said:
Try to do this:
1. Get Root permissions in settings and download Root Explorer
2. Put Global rom into your main folder
3. Start Root Explorer, grant root permissions to him and go to /dev/block/platform/bootdevice/by-name
4. Open devinfo as text file and change it from 0x79101001 to 0x79151001, then save it
5. Open the standard Flyme explorer, click on your global rom and agree with wipe
I can't guarantee that it will work but if it won't nothing bad will happen - the phone will just reboot
Click to expand...
Click to collapse
DiogoSepultura said:
it work´d for you?
Click to expand...
Click to collapse
Hey guys! Now i have the beta-version from "a" but no "g" version!
I have change the devinfo but nothing happend.
Has anyone an idea how i can install the "g" version?
Best regards.
peter
Hi,
Is there an easy step by step way of me installing the MIUI 10 beta on my UK Global mi 8?
I am using a Mac, I dont want to install twrp or unlock the boatloader.
Can anyone help?
Currently I am on 9.6.6.0 MIUI Global 9.6 Stable if this helps anything
Thanks in advance
I don't like MIUI, and i'm currently using Havoc OS (you should try it out, but you will need to unlock the bootloader).
Anyways i know the steps:
1.Update MIUI 9 to MIUI 10 from the update tab in settings.
2.Download miflashtool and install it
3.Download the beta rom (The fastboot version) from here
4.Flash it with the tool (there are many guides on xda or the miui website.
5.Profit
Download miui 10 global beta rom from en.miui.com.
Copy rom file (zip) to your phone.
Go to Setting>About>Miui Version>Press three dot>Choose package>Choose zip file.
khanhdx said:
Download miui 10 global beta rom from en.miui.com.
Copy rom file (zip) to your phone.
Go to Setting>About>Miui Version>Press three dot>Choose package>Choose zip file.
Click to expand...
Click to collapse
Tried that got message about "cannot verify update"
Any help?
ratedr75 said:
Tried that got message about "cannot verify update"
Any help?
Click to expand...
Click to collapse
So you should update to miui stable 10.2.2 then switch to beta.
These are the things I know,
1) if I try to download the update from the MIUI site, I usually get something like "cannot download" followed by "downloading"
2) I am still stuck on 9.6.6.0 MIUI Global 9.6 Stable, not been rude or racist on this but every single YouTube guide I have tried watching is usually done by an Asian person rattling through the process as quickly as possible.
When is the MIUI 10 actually coming out of Beta? and coming live to the phones?
Thanks
Hey,
I write you because I have a problem with my MI9.
Eu Rom with TWRP latest version 42 of the forum :good: . Last magisk app and root.
Everything is ok except when I want to install the updates!
Root the phone remove updates?
When I download it with official app, I restart on the TWRP. I go to the folder with the zip for update but I still have an error on the zip (download 6 times).
Thank you for your advice on the procedure to follow.
Bye !
EDIT SOLVED : Just my ****ing downloader corrupt all my big files (why all ROM are defect...). Thanks for help guys and idea to try to open it with archiver ???
I put screenshots. Help me please. Don't want brick my phone
Edit : I had try to download last time on Xiaomi website and not with app.
Again another error.
So I'm totally block. I have regrets to Root my phone now ?.
Could you just help me please for this problems. No results on Xiaomi forums. ??
Regards
Nobody meets the same problem?
Nobody to a little idea to help me on the thing what I need to do?
Thanks !
Rolophi said:
Nobody meets the same problem?
Nobody to a little idea to help me on the thing what I need to do?
Thanks !
Click to expand...
Click to collapse
I don't know french but seeing "le fichier zip est corrompu" is enough. As i understand error says that zip is corrupted? I would try to download it from an other source. You may check in downloaded_ota folder if you can open it.
Rolophi said:
I put screenshots. Help me please. Don't want brick my phone
Edit : I had try to download last time on Xiaomi website and not with app.
Again another error.
So I'm totally block. I have regrets to Root my phone now ?.
Could you just help me please for this problems. No results on Xiaomi forums. ??
Regards
Click to expand...
Click to collapse
Thís rom flash by stock (MIUI) recovery.
Hey,
Many many thanks for reply guys !
I had try official rom package yes with : " ZIP CORRUPTED " on TWRP.
I had try to download last EU Rom on XDA and Xiaomi forum.
Error is not the same : " BAD ROM ERROR".
Now for this time and future times. What I need to do for update my phone please ?
When we Root phone if I understand we totally lost official Update Support ok.
Now with information of my screenshots about my room version.
What I need to download pleased ? ?
Thanks guys ! Really (I had already brick my fist MI9 when I had install TWRP and delete data and all partitions. The power of noob ?).
?
The last rom you downloaded from the website and not the app was for mi9t from what I can see from your screenshot. Try download the rom for mi9 on a computer and transfer to your phone and see
No we haven't lost the official update support. I have updated over official ota for many times until xiaomi stopped global beta releases. Check your phone model name, for Mi 9 it's cepheus and in official ROMs it in file name. And there is a different ROMs for mi 9, mi 9 pro, mi 9t and mi 9t pro ))) So download ROM for your model and try to open it for example in winrar. If archive is corrupted it won't open.
btw, i have had problems with corrupted archives. So it happens.
g_seva said:
No we haven't lost the official update support. I have updated over official ota for many times until xiaomi stopped global beta releases. Check your phone model name, for Mi 9 it's cepheus and in official ROMs it in file name. And there is a different ROMs for mi 9, mi 9 pro, mi 9t and mi 9t pro ))) So download ROM for your model and try to open it for example in winrar. If archive is corrupted it won't open.
btw, i have had problems with corrupted archives. So it happens.
Click to expand...
Click to collapse
Hey,
Thanks for support
So when I use official support update, download the attachment (zip on folder downloaded_rom) and try to install it in TWRP, I have error.
Automatic download update give me this zip :
miui_CEPHEUSEEAGlobal_V10.2.30.0.PFAEUXM_82c5904459_9.0
Why I have error with corrupt zip every times ?
My perfect wish is use official updater and install this zip with TWRP on last version (42 Cepheus).
It's possible if I understand you :good:
Rolophi said:
Hey,
Thanks for support
So when I use official support update, download the attachment (zip on folder downloaded_rom) and try to install it in TWRP, I have error.
Automatic download update give me this zip :
miui_CEPHEUSEEAGlobal_V10.2.30.0.PFAEUXM_82c5904459_9.0
Why I have error with corrupt zip every times ?
My perfect wish is use official updater and install this zip with TWRP on last version (42 Cepheus).
It's possible if I understand you :good:
Click to expand...
Click to collapse
Have you tried to open it in winrar? If winrar will also say that it corrupted, then it corrupted.
g_seva said:
Have you tried to open it in winrar? If winrar will also say that it corrupted, then it corrupted.
Click to expand...
Click to collapse
I try this night when I back. I show on Xiamoi forum, one guyq solved it with custom a special file.
I will back with news towmow. Many thanks :highfive:
EDIT SOLVED : Just my ****ing downloader corrupt all my big files (why all ROM are defect...). Thanks for help guys and idea to try to open it with archiver ???
I've been trying to root my redmi9 for a couple of days now, with no luck. Downloaded the relevant firmware for my version to my pc, extracted it and copied the boot img over to my phone and copied over magisk manager APK too. On my phone I opened and installed magisk manager and proceeded to the install process then selected patch file and clicked install. Unfortunately each time that I do this I get the same outcome the message reads-
-Device platform: arm64-v8a
-Copying images to cache
! Process error
! Installation failed
I've uninstalled magisk and reinstalled, with the same outcome. Then I've downloaded my phone's firmware directly to my phone and tried to patch the boot IMG like that, but exactly the same outcome. Re-checked that I have the correct firmware for my version and it is, so I can't really understand what is going wrong and why I can't select a patch to send back to pc? Points of note, I haven't got my sim inserted and wondered if this could be a problem as I can't select the other two debugging settings on my phone without my sim inserted ( install via USB and usb debugging (security settings) options) but USB debugging is selected to on. My miui version is Miui global 11.0.7 stable 11.0.7.0(QJCEUXM)
If any body has an already patched IMG file that I can use, or can help me achieve this myself it would be very much appreciated.
Philtyj said:
I've been trying to root my redmi9 for a couple of days now, with no luck. Downloaded the relevant firmware for my version to my pc, extracted it and copied the boot img over to my phone and copied over magisk manager APK too. On my phone I opened and installed magisk manager and proceeded to the install process then selected patch file and clicked install. Unfortunately each time that I do this I get the same outcome the message reads-
-Device platform: arm64-v8a
-Copying images to cache
! Process error
! Installation failed
I've uninstalled magisk and reinstalled, with the same outcome. Then I've downloaded my phone's firmware directly to my phone and tried to patch the boot IMG like that, but exactly the same outcome. Re-checked that I have the correct firmware for my version and it is, so I can't really understand what is going wrong and why I can't select a patch to send back to pc? Points of note, I haven't got my sim inserted and wondered if this could be a problem as I can't select the other two debugging settings on my phone without my sim inserted ( install via USB and usb debugging (security settings) options) but USB debugging is selected to on. My miui version is Miui global 11.0.7 stable 11.0.7.0(QJCEUXM)
If any body has an already patched IMG file that I can use, or can help me achieve this myself it would be very much appreciated.
Click to expand...
Click to collapse
New version of magisk has this error.if you have another phone then you use it to patch your boot.img..it will work...I am also doing this...for a unknown error magisk manager cannot patch boot.img in redmi 9....then I try to patch my boot.img on another phone and it can patch....follow the link.....
https://forum.xda-developers.com/showpost.php?p=83419803&postcount=1
Hi, thanks for the reply. I'm not fully understanding what you're saying. How do I do this using another phone? Do I download magisk onto my other phone, then copy the boot IMG to the phone and patch the image? Then send the patch back to my pc to then flash the patch onto my redmi 9 via fastboot?
In your link, are these steps to follow to flash my redmi9 after creating the patch on my other phone?
Sorry for all of the questions, I'm new to this, it's my first attempt to root a phone and it seems that I've picked the hardest one to unlock and root!!
Philtyj said:
Hi, thanks for the reply. I'm not fully understanding what you're saying. How do I do this using another phone? Do I download magisk onto my other phone, then copy the boot IMG to the phone and patch the image? Then send the patch back to my pc to then flash the patch onto my redmi 9 via fastboot?
In your link, are these steps to follow to flash my redmi9 after creating the patch on my other phone?
Sorry for all of the questions, I'm new to this, it's my first attempt to root a phone and it seems that I've picked the hardest one to unlock and root!!
Click to expand...
Click to collapse
Yes...you can use any device to patch your boot.img file...there is no problem to do so....you can patch any boot.img in any device.....this new version of magisk manager has some issue with our redmi 9 ..so use another device and patch it..then flash patched boot.img via fastboot and follow the tutorial which I give you....
Shas45558 said:
Yes...you can use any device to patch your boot.img file...there is no problem to do so....you can patch any boot.img in any device.....this new version of magisk manager has some issue with our redmi 9 ..so use another device and patch it..then flash patched boot.img via fastboot and follow the tutorial which I give you....
Click to expand...
Click to collapse
Hi there, thanks for the help, I've finally rooted my redmi9! One more thing that I wanted to ask. It's about the ROM. I've tried to find information on Google, but nothing comes up that replies to my question. After rooting with magisk, do I need to install a ROM or is my original Xiaomi ROM still ok and working? I'm not interested in installing a custom ROM, root was simply to gain access for installing a program/app. So I'm hoping my original rom is in tact and I'm good to go.
Philtyj said:
Hi there, thanks for the help, I've finally rooted my redmi9! One more thing that I wanted to ask. It's about the ROM. I've tried to find information on Google, but nothing comes up that replies to my question. After rooting with magisk, do I need to install a ROM or is my original Xiaomi ROM still ok and working? I'm not interested in installing a custom ROM, root was simply to gain access for installing a program/app. So I'm hoping my original rom is in tact and I'm good to go.
Click to expand...
Click to collapse
You do not need to install any custom ROM your stock ROM is ok. But you can try the gsi ROM...
Follow the link you can install GSI without any problem...
https://forum.xda-developers.com/showpost.php?p=83533901&postcount=1
EEA version have call recorder or not? i try global version not have call recorder
adiyanto said:
EEA version have call recorder or not? i try global version not have call recorder
Click to expand...
Click to collapse
Hi Adiyanto,
Hope You're Doing Great..
Yes, You Are Right,
I Have Global Version It Doesn't Have Call Recorder And I Have Also Tried And Flashed EEA Version ROM And It Also Doesn't Have Call Recorder. So I Flashed The Redmi 9 Prime ROM Since It Has Call Recorder And Working Perfectly.
Note That, You Need To Unlock The Bootloader For This Activity. Or You Can Unlock Your Device Bootloader Then Root The Device Then Install Any Call Recorder In Any ROM That Works Perfectly.
Hope This Will Help You ...
Thanks,
MUHAMMAD Asif Qasim
aasiaasi said:
Hi Adiyanto,
Hope You're Doing Great..
Yes, You Are Right,
I Have Global Version It Doesn't Have Call Recorder And I Have Also Tried And Flashed EEA Version ROM And It Also Doesn't Have Call Recorder. So I Flashed The Redmi 9 Prime ROM Since It Has Call Recorder And Working Perfectly.
Note That, You Need To Unlock The Bootloader For This Activity. Or You Can Unlock Your Device Bootloader Then Root The Device Then Install Any Call Recorder In Any ROM That Works Perfectly.
Hope This Will Help You ...
Thanks,
MUHAMMAD Asif Qasim
Click to expand...
Click to collapse
maybe u can try Indonesia version. this version have call recorder. but i need for recorder my whatsapp phone.... ill try Any Call Recorder
aasiaasi said:
Hi Adiyanto,
Hope You're Doing Great..
Yes, You Are Right,
I Have Global Version It Doesn't Have Call Recorder And I Have Also Tried And Flashed EEA Version ROM And It Also Doesn't Have Call Recorder. So I Flashed The Redmi 9 Prime ROM Since It Has Call Recorder And Working Perfectly.
Note That, You Need To Unlock The Bootloader For This Activity. Or You Can Unlock Your Device Bootloader Then Root The Device Then Install Any Call Recorder In Any ROM That Works Perfectly.
Hope This Will Help You ...
Thanks,
MUHAMMAD Asif Qasim
Click to expand...
Click to collapse
Hi Qasim,
Would you please share the complete process of rooting and new img file restoration as I am new to this redmi9 am using this device in pakistan. Looking forward for your kind response
Regards nauman
Philtyj said:
Hi there, thanks for the help, I've finally rooted my redmi9! One more thing that I wanted to ask. It's about the ROM. I've tried to find information on Google, but nothing comes up that replies to my question. After rooting with magisk, do I need to install a ROM or is my original Xiaomi ROM still ok and working? I'm not interested in installing a custom ROM, root was simply to gain access for installing a program/app. So I'm hoping my original rom is in tact and I'm good to go.
Click to expand...
Click to collapse
Can you share your magisk_patched.img ? Cause I tried to patch the image on another device, but the created image boot-loops only
Tried patching the image on the redmi directly, but the resulting patched image is only 10MB and obviously boot-loops.
Thanks.
naumanakram said:
Hi Qasim,
Would you please share the complete process of rooting and new img file restoration as I am new to this redmi9 am using this device in pakistan. Looking forward for your kind response
Regards nauman
Click to expand...
Click to collapse
Dear Nauman,
Greetings !!!
For Rooting Your Device Please Refer To This LINK. Or If You Just Want Call Recording Feature Then Flash Redmi 9 Prime ROM To Your Mobile.
Thanks,
MUHAMMAD Asif Qasim