Related
I've been looking all over this site but I can't find anything. I suppose that it's partly because I'm not sure about the problem myself.
A couple of months back (maybe more) I upgraded to the ICS infinitum rom (blue version) with midnight kernel. It was great - the phone worked fine. Well I'm exaggerating, it ****ed up every once in a while. Programs would automatically shut down and it would get really slow after a while. But all in all it wasn't bad, and it was stable enough for me most of the time....
Then, last Thursday everything seemed to go apart, every program on the phone was shutting down. So I thought I'll just restart and it will be fine. When I did, the phone did not come back on. the kernel would load and then it was stuck on the start-up animation in infinite loops.
Now, to be frank, this isn't the first time this has happened. So I didn't panic. Last time I just used the CMW recovery to re-install the kernel and the rom (I keep the files on the sd card). But this time, I wanted to try to avoid the factory wipe for as long as I could, and try finding a different option, knowing that if all else fails, I have something to revert back to.
Then I did the mistake of deleting the init.d file without re-installing anything. I wanted to, but accidentally clicked on the 'reboot now' option. And then all went to ****. The kernel didn't load. I went to recovery and it couldn't mount the sd card so I couldn't re-install it.
I tried flashing a new kernel using odin, and it did get me a bit better: my CWM recovery can read the sd. However, I still can't mount the system. Even worse, when I get to the infinitum zip roms and re-installing it brings up the status 7 error (which, after searching, seems to come up for different reasons for each person)
Despite installing a new kernel, when I reboot the phone now it doesn't load the kernel anymore, it just stays stuck on the welcome screen. I tried using the recovery to re-install a different kernel, it worked, but the phone still won't start - it now automatically skips to the recovery mode. I don't know if I should try flashing a rom through odin, and I'm too afraid to try anything at all now...
Can anyone help me? Is there any way to restore the init.d file or maybe that has nothing to do with my problem?
uvii said:
I've been looking all over this site but I can't find anything. I suppose that it's partly because I'm not sure about the problem myself.
A couple of months back (maybe more) I upgraded to the ICS infinitum rom (blue version) with midnight kernel. It was great - the phone worked fine. Well I'm exaggerating, it ****ed up every once in a while. Programs would automatically shut down and it would get really slow after a while. But all in all it wasn't bad, and it was stable enough for me most of the time....
Then, last Thursday everything seemed to go apart, every program on the phone was shutting down. So I thought I'll just restart and it will be fine. When I did, the phone did not come back on. the kernel would load and then it was stuck on the start-up animation in infinite loops.
Now, to be frank, this isn't the first time this has happened. So I didn't panic. Last time I just used the CMW recovery to re-install the kernel and the rom (I keep the files on the sd card). But this time, I wanted to try to avoid the factory wipe for as long as I could, and try finding a different option, knowing that if all else fails, I have something to revert back to.
Then I did the mistake of deleting the init.d file without re-installing anything. I wanted to, but accidentally clicked on the 'reboot now' option. And then all went to ****. The kernel didn't load. I went to recovery and it couldn't mount the sd card so I couldn't re-install it.
I tried flashing a new kernel using odin, and it did get me a bit better: my CWM recovery can read the sd. However, I still can't mount the system. Even worse, when I get to the infinitum zip roms and re-installing it brings up the status 7 error (which, after searching, seems to come up for different reasons for each person)
Despite installing a new kernel, when I reboot the phone now it doesn't load the kernel anymore, it just stays stuck on the welcome screen. I tried using the recovery to re-install a different kernel, it worked, but the phone still won't start - it now automatically skips to the recovery mode. I don't know if I should try flashing a rom through odin, and I'm too afraid to try anything at all now...
Can anyone help me? Is there any way to restore the init.d file or maybe that has nothing to do with my problem?
Click to expand...
Click to collapse
I suggest flash 3-file GB rom via odin with ticked re-partirion and phone bootloaderupdate.
First of all init.d has nothing to do with the boot of kernel and ROM itself. It's just like autostart in Windows, so if it's missing it shouldn't cause problems.
My solution is to flash a complete stock Gingerbread ROM using Odin. You can get them at sammobile.com. Then afterwards flash a custom kernel and then whatever you like.
If you need help,feel free to ask me
Sent from my Gameboy Color
Yes! Thank you! That worked!!
It happened again! just 10 days later.
Is the Infinidtum rom ****ed up in any way?
it's stuck on the loading part of the rom
I have a Moto G XT1072. I had unlocked the bootloader, installed TWRP and rooted it a while ago. I did not install any custom rom.
I was completely unaware of TWRP's lack of support for OTA upgrades, so when my phone notified me that there was an update available, I was like "oh, cool, okay" and downloaded it.
a) The download finished, the phone rebooted and TWRP recovery popped up.
b)"Mh, I guess I have to find the update file and flash it, probably"
c) Of course I didn't find it, so I googled and found out that if I want to install an OTA update I have to flash back the stock recovery and I might lose root. "Not worth it, thanks, maybe when 6.0 comes out"
d) So I rebooted the phone. Boot screen with motorola logo shows up, phone boots normally, I insert my sim card pin, set the alarm for tomorrow morning (6:00 am, fml) and *poof*, phone shuts down and reboots in TWRP.
e) back to point d.
Recap: I downloaded the update but I didn't install it, phone boots normally (I can even go in settings), but after 30 seconds it shuts down and reboots in TWRP. I do not care about the update, I just hope I can avoid re-rooting or even wiping.
I've got the exact same problem as you. Stupid to not have thought this could've happened with TWRP installed. Additional problem is, I have removed everything ''root-related'' (adb, fastboot), because I thought I wouldn't need it anymore. TWRP is obviously still on my mobile, but that's about it. I have already made a backup in TWRP (don't think it will help, because I'm afraid it will backup as boot trap), but who knows if it may help.
Back to the point, I'm a noob with rooting, I don't even know how I've managed to root it in the first place, but I'm stuck with the same problem as you are but without the required tools (at least, that's what I think)...
UPDATE: So my phone finished the backup, I turned it off to charge my battery, I fired it back up after an hour (normal way, not TWRP way), and it all of the sudden works again. It doesn't boot trap anymore and it seems like I'm able to use every function properly again. After those 30 seconds (where it usually rebooted), I now got the message that the installation had failed and that I should try again later. I don't know if there's any logical explanation for this or if this is pure luck, but I'm glad it's working again! I don't know if this will help for you as well ricvail, but I think it's at least worth a shot!
Hi all,
I have a big problem with my phone.
I wanted to try out Resurrection Remix on my phone.
I installed twrp-3.0.2-0-dogo.img with fastboot.
After reboot i saw the Teamwin logo and then i did a full wipe of everything, except SD Card (like i always do when i install a custom rom)
Then i installed Resurrection Remix M v.5.7.3.zip from sd and gapps, then wiped cache and pressed reboot.
No error with flashing, when the phone booted and i saw some logo's, took like 2-3 minutes and then the phone went off and started to reboot and reboot, had to take the battery off to let it stop.
Since then my phone isn't working properly, i tried to flash different kinds of stock roms with flash tool including wipe options.
No errors with flashing, but the phone still doesn't boot or it goes off after Sony logo then i leave the battery out for 10 mins or so then it starts and it looks normal, i can install aps, i can call, but the first time when i reboot my phone with this new install it's back to rebooting. I tried to leave my battery out for 10 hours but it doesn't help.
I tried to relock my bootloader and then unlock it again.
If i tried to install twrp-3.0.2-0-dogo.img it's going to reboot also, i tried airless or evomix kernel, then recovery starts but when i try to install a custom rom zip, and try to flash it my phone reboots after 5 seconds.
And now i don't know what to do anymore, so please anyone? help?
Thanks in advance!
did you try installing stock rom with flashtool ?
What was your android version when you first flash TWRP 3.0.2 recovery?If you are coming from stock lollipop then you should flash TWRP 3.0.2 (.228).Make sure you unlocked phone bootloader.Use advance clean in the recovery,select all except sd card and clean all.Then try flashing RR Rom again.Do wipe cache/Delvik after flashing RR Rom and before flashing GAPPS.
falptekin said:
did you try installing stock rom with flashtool ?
Click to expand...
Click to collapse
Yes, i tried atleast :
C5503_10.1.1.A.1.310_GLOBAL-LTE.ftf
C5503_10.6.A.0.454_HK.ftf
C5503_10.7.A.0.228_TR.ftf
And used all wipe options.
I used Emma tool, after that i removed the battery from the phone for 48 hours, then it booted the second time. I charged the battery and i left it like this for a few hours, then i tried to reboot but it went off after 20 seconds, tried to boot again but it goes off after Sony logo.
Røbin said:
What was your android version when you first flash TWRP 3.0.2 recovery?If you are coming from stock lollipop then you should flash TWRP 3.0.2 (.228).Make sure you unlocked phone bootloader.Use advance clean in the recovery,select all except sd card and clean all.Then try flashing RR Rom again.Do wipe cache/Delvik after flashing RR Rom and before flashing GAPPS.
Click to expand...
Click to collapse
My version was CM 13 (cm-13.0-20160801-UNOFFICIAL-dogo.zip) that was working very well, but before i flashed RR i did advanced cleaning and i checked everything except SD Card and USB OTG and a factory reset and after flashing pressed wipe cache/dalvik and then i rebooted.
The phone is off now without battery. This Sony doesn't have recovery, buttons aren't working and they never did, i can only flash twrp with fastboot wich makes it only boot into recovery and then i used this to flash custom roms.
I only started to flash custom roms about a month ago because someone gave me this Sony ZR, i bought a new original battery for it but when i call on speaker there is some underwater bubbling sound and i also wanted marshmallow and i hoped this may fix the bubbling sound, with CM 13 the sound was already better but didn't fix it completely.
TWRP won't let me flash anything anymore, it's starting to flash but after 5 seconds it reboots back into recovery.
Edit: Is it possible that there is still stuff in the RAM that is causing problems?
Edit: I thought i'm going to this phone another try. I installed twrp-3.0.2-0-dogo.img and it boots, also this version didn't want to boot anymore but now it does. I wiped everything, also SD Card, i checked everything is empty. Before i couldn't wipe my SD Card anymore and in Windows all files showed double and i couldn't copy files. Going to charge it first and think about what i want try to flash. Wipe cache/dalvik and then flash gapps is a good idea.
Edit: it almost charged now, when it charged i will remove the battery again for the night, i will decide later what i'm going to do.
Fuchsia said:
My version was CM 13 (cm-13.0-20160801-UNOFFICIAL-dogo.zip) that was working very well, but before i flashed RR i did advanced cleaning and i checked everything except SD Card and USB OTG and a factory reset and after flashing pressed wipe cache/dalvik and then i rebooted.
The phone is off now without battery. This Sony doesn't have recovery, buttons aren't working and they never did, i can only flash twrp with fastboot wich makes it only boot into recovery and then i used this to flash custom roms.
I only started to flash custom roms about a month ago because someone gave me this Sony ZR, i bought a new original battery for it but when i call on speaker there is some underwater bubbling sound and i also wanted marshmallow and i hoped this may fix the bubbling sound, with CM 13 the sound was already better but didn't fix it completely.
TWRP won't let me flash anything anymore, it's starting to flash but after 5 seconds it reboots back into recovery.
Edit: Is it possible that there is still stuff in the RAM that is causing problems?
Edit: I thought i'm going to this phone another try. I installed twrp-3.0.2-0-dogo.img and it boots, also this version didn't want to boot anymore but now it does. I wiped everything, also SD Card, i checked everything is empty. Before i couldn't wipe my SD Card anymore and in Windows all files showed double and i couldn't copy files. Going to charge it first and think about what i want try to flash. Wipe cache/dalvik and then flash gapps is a good idea.
Edit: it almost charged now, when it charged i will remove the battery again for the night, i will decide later what i'm going to do.
Click to expand...
Click to collapse
Someone maybe played with your phone in underwater to cause bubbling sound.I don't see any hardware problem in your phone.You maybe did something wrong or anything else that your phone behaving like this.Listen,You first flash a stock rom.Lollipop would be better because you can flash flashable twrp 3.0.2(.228) via flash fire or flashify app.I once tried flashing twrp img through fastboot and it caused bootloop.So I always use flashable zip.Fastboot for emergency.And try to reformatting your system pertition.I hope this will work or you'll need expert developer to help you.Maybe Daedroza can help you if my sugg. don't work.
Røbin said:
Someone maybe played with your phone in underwater to cause bubbling sound.I don't see any hardware problem in your phone.You maybe did something wrong or anything else that your phone behaving like this.Listen,You first flash a stock rom.Lollipop would be better because you can flash flashable twrp 3.0.2(.228) via flash fire or flashify app.I once tried flashing twrp img through fastboot and it caused bootloop.So I always use flashable zip.Fastboot for emergency.And try to reformatting your system pertition.I hope this will work or you'll need expert developer to help you.Maybe Daedroza can help you if my sugg. don't work.
Click to expand...
Click to collapse
The bubbling sound is a known issue with some Sony smartphones, on google i have read more stories about this problem, not only zr but also other Z models. The problem is caused by the second mic i think, if i use loudspeaker when calling and i lay the phone on the back the sound is much better. I saw on other thread about this, http://forum.xda-developers.com/xperia-zr/help/disable-mic-t3434997
On YouTube you can find many movies about this, for example https://www.youtube.com/watch?v=fC6JbuQJ_gg
It's really annoying for the other person to hear these sounds when you are calling. They need to listen very carefully to understand you, but it's only when you call on speaker.
When i wanted to flash a custom rom for the first time i wanted to do this with apps on my phone. I rooted my phone with kingroot and used an app to check if the phone was really rooted. I installed twrp app and tried to install recovery but it gave an error. I tried to install recovery with Flashify but then it says that the recovery partition is not present. When i try to flash with Flashify it says it's going to reboot into recovery but then the the phone boots like normal. The only way for me to get a recovery on the phone is just flashing with fastboot or using flashtool. Doomlord kernel and XZDualrecovery don't boot, only twrp is working.
Fuchsia said:
The bubbling sound is a known issue with some Sony smartphones, on google i have read more stories about this problem, not only zr but also other Z models. The problem is caused by the second mic i think, if i use loudspeaker when calling and i lay the phone on the back the sound is much better. I saw on other thread about this, http://forum.xda-developers.com/xperia-zr/help/disable-mic-t3434997
On YouTube you can find many movies about this, for example https://www.youtube.com/watch?v=fC6JbuQJ_gg
It's really annoying for the other person to hear these sounds when you are calling. They need to listen very carefully to understand you, but it's only when you call on speaker.
When i wanted to flash a custom rom for the first time i wanted to do this with apps on my phone. I rooted my phone with kingroot and used an app to check if the phone was really rooted. I installed twrp app and tried to install recovery but it gave an error. I tried to install recovery with Flashify but then it says that the recovery partition is not present. When i try to flash with Flashify it says it's going to reboot into recovery but then the the phone boots like normal. The only way for me to get a recovery on the phone is just flashing with fastboot or using flashtool. Doomlord kernel and XZDualrecovery don't boot, only twrp is working.
Click to expand...
Click to collapse
First of all change the kingroot with supersu.Kingroot root access control not so stable.Download selinux mode changer to set in permissive mode.If you are at LP version,twrp app won't install recovery or support it.flash twrp3.0.2(.228) via flashify or different flashing app.selinux permissive mode will let you to go to recovery mode.By the way,xzdualrecovery is for locked bootloader and should boot without any problem.I don't know it will work on unlocked bootloader or not.So try your best what I have told and this is all I have to share from my own experience.
Røbin said:
First of all change the kingroot with supersu.Kingroot root access control not so stable.Download selinux mode changer to set in permissive mode.If you are at LP version,twrp app won't install recovery or support it.flash twrp3.0.2(.228) via flashify or different flashing app.selinux permissive mode will let you to go to recovery mode.By the way,xzdualrecovery is for locked bootloader and should boot without any problem.I don't know it will work on unlocked bootloader or not.So try your best what I have told and this is all I have to share from my own experience.
Click to expand...
Click to collapse
I flashed the latest Lollipop and it's back to rebooting, i see the sony logo and before it says powered by android it goes off. I removed the battery again, i will try to root the phone and use selinux mode changer when it's booting. It wil take atleast 12 hours without battery before it boots.
Fuchsia said:
I flashed the latest Lollipop and it's back to rebooting, i see the sony logo and before it says powered by android it goes off. I removed the battery again, i will try to root the phone and use selinux mode changer when it's booting. It wil take atleast 12 hours without battery before it boots.
Click to expand...
Click to collapse
Is there any problem with your phone?Did you experiment your phone too much?I don't get it,why after flashing stock rom via flashtool gives you bootloops if no error showed up while flashing!!Is this your battery problem?And I think so because few months ago my phone battery heavily damaged and therefor It don't charge and my phone didn't bootup but bootlooping.I first thought it was my mistake to flash rom incorrectly.So i had to flash stock rom via flashtool to go back to normal but unfortunetly PC don't recoznige my phone not even fastboot.I was worried and couldn't do anything and went to service center,they changed the battery with new one and my phone comes to life again.Mainly this was for my local charger fault.it also damaged in that day too.SO brought a orginal sony charger.But you said you brought a new battery too then how come you face bootloops.well if there is no error message shows up I can't help you with anything.Only better expert member can help you.By the way you can collect log via adeb fastboot if your phone fastboot mod work.
Here is the inst:
1. Install the Android Debug Bridge using http://developer.android.com/tools/help/adb.html
2. Instructions on installing Android Debug Bridge are located here:
http://www.howtogeek.com/125769/how-to-install-and-use-abd-the-android- debug-bridge-utility
3. Run the following commands:
“adb logcat -c" (This clears the logs.)
4. Reproduce the issue.
5. Then, run the following command to capture the logs in a file:
“adb logcat -d > Name_of_Log_File.txt"
maybe it will gives some clues what is happening.
Røbin said:
Is there any problem with your phone?Did you experiment your phone too much?I don't get it,why after flashing stock rom via flashtool gives you bootloops if no error showed up while flashing!!Is this your battery problem?And I think so because few months ago my phone battery heavily damaged and therefor It don't charge and my phone didn't bootup but bootlooping.I first thought it was my mistake to flash rom incorrectly.So i had to flash stock rom via flashtool to go back to normal but unfortunetly PC don't recoznige my phone not even fastboot.I was worried and couldn't do anything and went to service center,they changed the battery with new one and my phone comes to life again.Mainly this was for my local charger fault.it also damaged in that day too.SO brought a orginal sony charger.But you said you brought a new battery too then how come you face bootloops.well if there is no error message shows up I can't help you with anything.Only better expert member can help you.By the way you can collect log via adeb fastboot if your phone fastboot mod work.
Here is the inst:
1. Install the Android Debug Bridge using http://developer.android.com/tools/help/adb.html
2. Instructions on installing Android Debug Bridge are located here:
http://www.howtogeek.com/125769/how-to-install-and-use-abd-the-android- debug-bridge-utility
3. Run the following commands:
“adb logcat -c" (This clears the logs.)
4. Reproduce the issue.
5. Then, run the following command to capture the logs in a file:
“adb logcat -d > Name_of_Log_File.txt"
maybe it will gives some clues what is happening.
Click to expand...
Click to collapse
I tried my old battery and it boots, already booted up 3x times. I never thought it maybe the battery because it's only 2 months old. Thanks so much for your help.
I tried to install recovery with selinux permissive mode and flashify but i stil can't install recovery.
It says: Partition not found, your recovery partition couldn't be found. You won't be able to flash recovery images. You can stil flash zip files.
I don't think it's possible to have recovery on this phone, atleast not the normal way.
Edit: I flashed RR and it's working fine. I'm so happy it's working again, i never really used this old battery but i think it's not so bad at all. I only lost 8% battery with flashing and booting RR. I never really thought it was the battery because it was charging normal, i used it for 2 months or something without problems.
Fuchsia said:
I tried my old battery and it boots, already booted up 3x times. I never thought it maybe the battery because it's only 2 months old. Thanks so much for your help.
I tried to install recovery with selinux permissive mode and flashify but i stil can't install recovery.
It says: Partition not found, your recovery partition couldn't be found. You won't be able to flash recovery images. You can stil flash zip files.
I don't think it's possible to have recovery on this phone, atleast not the normal way.
Edit: I flashed RR and it's working fine. I'm so happy it's working again, i never really used this old battery but i think it's not so bad at all. I only lost 8% battery with flashing and booting RR. I never really thought it was the battery because it was charging normal, i used it for 2 months or something without problems.
Click to expand...
Click to collapse
If it was a battery problem then change it or carefully use it.And the error you are facing is because the latest flashify has some bugs.But now as you are already using RR MM rom.You can download twrp app and use this app to install recovery.
Røbin said:
If it was a battery problem then change it or carefully use it.And the error you are facing is because the latest flashify has some bugs.But now as you are already using RR MM rom.You can download twrp app and use this app to install recovery.
Click to expand...
Click to collapse
I tried to install recovery, flashify hangs all the time, twrp app gives an error when i try to install recovery and flashfire says there is no partition for this image. I thought i'll do a factory reset in RR and when the phone rebooted i saw twrp. I tried with pressing the buttons when booting but no luck. I used reboot into recovery option and it worked. This is the first custom rom that gave my phone recovery.
I will throw the battery away and use the old battery, i can always buy a new one later.
Fuchsia said:
I tried to install recovery, flashify hangs all the time, twrp app gives an error when i try to install recovery and flashfire says there is no partition for this image. I thought i'll do a factory reset in RR and when the phone rebooted i saw twrp. I tried with pressing the buttons when booting but no luck. I used reboot into recovery option and it worked. This is the first custom rom that gave my phone recovery.
I will throw the battery away and use the old battery, i can always buy a new one later.
Click to expand...
Click to collapse
OH!So that the old recovery occupied all the recovery partition space that you are unable to install twrp recovery.But old recovery should be replaced by new recovery,that's strange.well I don't know how did this happen but don't use fastboot to install recovery or anything else,It's for emergency.I'm not fully familiar with fastboot though,I tried once before and caused trouble. I hope your troubles are gone now.
Røbin said:
OH!So that the old recovery occupied all the recovery partition space that you are unable to install twrp recovery.But old recovery should be replaced by new recovery,that's strange.well I don't know how did this happen but don't use fastboot to install recovery or anything else,It's for emergency.I'm not fully familiar with fastboot though,I tried once before and caused trouble. I hope your troubles are gone now.
Click to expand...
Click to collapse
My phone don't have any partition recovery, i tried 100x times with stock rom to boot recovery, with buttons, with apps that boot in recovery. I do have recovery with RR rom, but it's not in the recovery partition. I tried Tesla, CM 13, XOSP but still no recovery. I tried to boot recovery with all roms, but it doesn't matter. It's fine now, been playing a bit with RR and it's a nice rom. Thank you for helping.
Hello everyone, how do you do?
I've got this phone that was running perfectly the stock rom, but I have that addiction to customize every phone I land my hands into (I guess some of you either haha).
But
This time something horrible happened, and I just can't back this phone to work. I'll tell what did I've done and I'm hopping you to help me (just paid a lot to fix the broken screen, don't want to buy a new board...)
Here we go: yesterday, several times I've tried to unlock the phone, and figure out that the fastboot command to do that have changed to fastboot oem unlock (at least in this phone), and had no need to copy that code into Motorola's page. After unlock, tried to install TWRP Recovery, several times, and finnaly got one that worked here. Okay. Ready to go. Also had difficulty to find a ROM that is compatible with this phone (I wanted some with Android 9, or 8.1, at least). I was capable to install the Lineage OS 15 Unnoficial for Nicklaus, but got stuck in Lineage OS Logo Screen. Fine. Downloaded the Lineage OS 14 Unnoficial (Android 7.1), flashed, and everything went fine! The ROM was installed, configured, but... My phone has the OnScreen Buttons for Navigation... And this ROM doesn't appear to get this to work... Every time I went to settings page and tried to enable this feature, the Settings Application stucks and phone restarts. So, at this point, I thought that the ROM was with some code problem, whatever, decided to download another. And (that was a HUGE MISTAKE). Downloaded the DotOS ROM here.
After flash, the ROM loaded up fine. Settings, ok, system, ok. But, the same problem with the Navigation Buttons. What? Again? Yes. Tried to enable via settings, but I realized that some configurations of Lineage OS installation is still there - forgot to wipe data before flashing ROM... But at this time (I guess it was 2AM) I had no patience to reboot, wipe, boot, configure, and decided to factory reset using the option in Settings menu. The DotOS shows me a logo saying "Wiping data". The phone reboots. And reboots. And reboots. But, the TWRP stills working, and tried many, many times to flash all sort of ROMs with no success at all.
I was going insane, you know, WHY I CAN'T FLASH THE ROM I'VE JUST FLASHED MINUTES AGO?? Got a clue: somehow when wiping data, DotOS bugged my /data partition (in TWRP, when wiping data, got an error in this partition, and cant fix it using TWRP fix menu). Tried a lot of tutorials over the internet to fix that partition, with no success. And, unfortunately, at that point my /system and /cache partition got broken too.
But, I had my secret weapon: THE STOCK ROM. Yes. Everytime all went wrong, is quite simple: just install the factory's ROM, and you will be fine. Right? Wrong. Really don't know why, I was not able to flash some images of the ROM (boot, recovery, system also). Thought I've downloaded the wrong Stock ROM. Tried another. And another. No success. What the hell? At this point my mind was not lucid enough, and decided to STUPIDLY FORMAT PARTITIONS BY MY SELF. Reboot Bootloader. Connect Cable. Fastboot.
fastboot devices -> OK
fastboot erase boot -> OK
fastboot erase userdata -> OK
fastboot erase system -> OK
That's it! Fixed! Now is just reboot, and... Reboot. Reboot. Reboot. Reboot.
Ok, Vol Down + Power. Nothing. Ok, Vol Up + Power. Nothing. Ok, Vol Up + Vol Down + Power, Vol Power + Dow Up, Fingerprint + Screen + Two Punches + Power. Nothing.
Stuck in boot loop. My worse nightmare. Thinked: okay, lets remove the battery, and... Remember I've just fixed the broken screen? Yeah. Out of lucky, the assistance tried THREE TIMES to change my screen, because the screen's provider at first provided a screen with ghost touches, at second a screen that had light glitches. At third, a correct screen. Don't want to loose my warranty, you know. If this third screen has some problem either? The assistance put that tag over the screw, you know. Can't take my battery off. But I really don't know if removing the battery will really help, because I've erased my boot partition. I hate me. My wife too (but she hated before). Now, got this tutorial: Ultimate Guide for [Bootloop Recovery] Noob Friendly, that is a little outdated, and can't help me. But gave me some hope: So, my phone isn't bricked yet! I can fix it!
But I really don't know how.
I hope someone helps me, and that this topic can be useful for any one who got stuck in Boot Loop from here to eternity.
Regards,
Fernando Garcia (sorry for my bad english, I only speak JavaScript)
fernandocg30 said:
Hello everyone, how do you do?
I've got this phone that was running perfectly the stock rom, but I have that addiction to customize every phone I land my hands into (I guess some of you either haha).
But
This time something horrible happened, and I just can't back this phone to work. I'll tell what did I've done and I'm hopping you to help me (just paid a lot to fix the broken screen, don't want to buy a new board...)
Here we go: yesterday, several times I've tried to unlock the phone, and figure out that the fastboot command to do that have changed to fastboot oem unlock (at least in this phone), and had no need to copy that code into Motorola's page. After unlock, tried to install TWRP Recovery, several times, and finnaly got one that worked here. Okay. Ready to go. Also had difficulty to find a ROM that is compatible with this phone (I wanted some with Android 9, or 8.1, at least). I was capable to install the Lineage OS 15 Unnoficial for Nicklaus, but got stuck in Lineage OS Logo Screen. Fine. Downloaded the Lineage OS 14 Unnoficial (Android 7.1), flashed, and everything went fine! The ROM was installed, configured, but... My phone has the OnScreen Buttons for Navigation... And this ROM doesn't appear to get this to work... Every time I went to settings page and tried to enable this feature, the Settings Application stucks and phone restarts. So, at this point, I thought that the ROM was with some code problem, whatever, decided to download another. And (that was a HUGE MISTAKE). Downloaded the DotOS ROM here.
After flash, the ROM loaded up fine. Settings, ok, system, ok. But, the same problem with the Navigation Buttons. What? Again? Yes. Tried to enable via settings, but I realized that some configurations of Lineage OS installation is still there - forgot to wipe data before flashing ROM... But at this time (I guess it was 2AM) I had no patience to reboot, wipe, boot, configure, and decided to factory reset using the option in Settings menu. The DotOS shows me a logo saying "Wiping data". The phone reboots. And reboots. And reboots. But, the TWRP stills working, and tried many, many times to flash all sort of ROMs with no success at all.
I was going insane, you know, WHY I CAN'T FLASH THE ROM I'VE JUST FLASHED MINUTES AGO?? Got a clue: somehow when wiping data, DotOS bugged my /data partition (in TWRP, when wiping data, got an error in this partition, and cant fix it using TWRP fix menu). Tried a lot of tutorials over the internet to fix that partition, with no success. And, unfortunately, at that point my /system and /cache partition got broken too.
But, I had my secret weapon: THE STOCK ROM. Yes. Everytime all went wrong, is quite simple: just install the factory's ROM, and you will be fine. Right? Wrong. Really don't know why, I was not able to flash some images of the ROM (boot, recovery, system also). Thought I've downloaded the wrong Stock ROM. Tried another. And another. No success. What the hell? At this point my mind was not lucid enough, and decided to STUPIDLY FORMAT PARTITIONS BY MY SELF. Reboot Bootloader. Connect Cable. Fastboot.
fastboot devices -> OK
fastboot erase boot -> OK
fastboot erase userdata -> OK
fastboot erase system -> OK
That's it! Fixed! Now is just reboot, and... Reboot. Reboot. Reboot. Reboot.
Ok, Vol Down + Power. Nothing. Ok, Vol Up + Power. Nothing. Ok, Vol Up + Vol Down + Power, Vol Power + Dow Up, Fingerprint + Screen + Two Punches + Power. Nothing.
Stuck in boot loop. My worse nightmare. Thinked: okay, lets remove the battery, and... Remember I've just fixed the broken screen? Yeah. Out of lucky, the assistance tried THREE TIMES to change my screen, because the screen's provider at first provided a screen with ghost touches, at second a screen that had light glitches. At third, a correct screen. Don't want to loose my warranty, you know. If this third screen has some problem either? The assistance put that tag over the screw, you know. Can't take my battery off. But I really don't know if removing the battery will really help, because I've erased my boot partition. I hate me. My wife too (but she hated before). Now, got this tutorial: Ultimate Guide for [Bootloop Recovery] Noob Friendly, that is a little outdated, and can't help me. But gave me some hope: So, my phone isn't bricked yet! I can fix it!
But I really don't know how.
I hope someone helps me, and that this topic can be useful for any one who got stuck in Boot Loop from here to eternity.
Regards,
Fernando Garcia (sorry for my bad english, I only speak JavaScript)
Click to expand...
Click to collapse
Hey, download the stock rom for your from here:
https://motostockrom.com/motorola-moto-e4-plus-xt1773
And follow this process to flash the rom on to your phone:https://androidmtk.com/flash-stock-rom-using-smart-phone-flash-tool
Warning for this phone flashing process:
In SP flash tool, "do not" select 'format all+ download'(the phone will be bricked). Only select 'Download only'.
Secondly deselect preloader after adding scatter file(flashing it will also brick the device).
This all warnings are already given in the flash guide, i just want you to give proper attention while doing it.
Hello everyone,
First I would like to mention i tried almost everything i can think of but a while back I lost root via incorect ota update from magisk (i guess i accidentally rebooted)
And cant seem to get it back ever since.
I tried reflashing 10.14 from orangefox, and it boots but as soon as i turn off or reboot it is stuck on splash screen. I heard that Xiaomi did botch several security updates so people tried full roms, not incremental and solved their problems, so i flashed 10.17 same story, boots and on shoutdown stuck on splash screen on the next boot
Problem is it wont even boot if i do a full recovery.zip install, only if i flash the OTA right after fastboot boot, i presumed i messed something in A/B partitions, so i installed recovery to ramdisk, twrp recommends doing a recovery bootloop fix after, which i cannot do since i get ERROR 1 something hex kernel
Also it seems to be a problem that i can flash from fastboot, but not miflash since error appears that the critical partition is locked, which i am sure i unlocked before, after all i couldn' tb
I would really like to fix it and not lose data of apps. I tried flashing 10.17 from orange fox, and doing a magisk flash from the fox addons, and again it gets stuck on splash. If I could just somehow get into te os while root so i can backup app data and run over to a Rom away from emmc bugs and the like. Really a shame that they abandoned this beautiful looking phone with mid range specs, even in its prime.
I would also like to patch boot.img from 10.17, but it seems it is not needed since i did that with 10.14, which also stuck on android welcome screen when i flashed magisk. In addition it seems boot.img is not modified at all since all files are date of creation 2008. for all firmware on that phone
Please, any suggestions, I need to do more clearer scans (which Gcams allow), and after even touching fastboot i am getting software errors all over (i am really hoping those are user errors)
Thank you for reading.
Somehow it solved itself. I know I should explain what I did but i really don't know.
Edl over adb or fastboot wasn't working so i entered it in https://androidfilehost.com/?fid=24591000424940129
the script worked, but it was not made for Xiaomi mi a2.
Then i did a miflash, but it did an infinite flashing which after 1000 seconds i aborted, then i trid it and it booted.
Few notes it wont boot when connected to a usb, and it sometimes gets into fastboot splashscreen combo if i hold fastboot while on flashscreen, after that it booted.
Maybe it is a trick for soft brick i dont know, after that i was able to reflash magisk.
I now it isn't much, but hopefully it helps someone, i was hanging onto threads, searching one error after another.