Related
Hi guys, I'm getting a z1 tomorrow
Should I get c6902 or c6903 ? I don't need 4g but I want a device that has many mods/ ROMs. That's all I need.. Second, what is lb and UB ROM? Third I want to install ROM on new device, the steps of installing ROM is something I don't understand.. My experience with grouper nexus 7, unlocked it, flashed it.. But z1, how to do that? Can someone explain basics to me?
bsmstar said:
Hi guys, I'm getting a z1 tomorrow
Should I get c6902 or c6903 ? I don't need 4g but I want a device that has many mods/ ROMs. That's all I need.. Second, what is lb and UB ROM? Third I want to install ROM on new device, the steps of installing ROM is something I don't understand.. My experience with grouper nexus 7, unlocked it, flashed it.. But z1, how to do that? Can someone explain basics to me?
Click to expand...
Click to collapse
- depends. Is your device that you've ordered support LTE? If yes, then you'll get C6903
- LB = Locked boot loader. A state where you can't flash custom kernel
- UB = Unlocked boot loader. A state where you've unlock your boot loader, so you can flash custom kernel.
- which steps?
- there's ROM which can be flashed even your bootloader still locked. So, it depends on what ROM you wanna use.
omegahanggara said:
- depends. Is your device that you've ordered support LTE? If yes, then you'll get C6903
- LB = Locked boot loader. A state where you can't flash custom kernel
- UB = Unlocked boot loader. A state where you've unlock your boot loader, so you can flash custom kernel.
- which steps?
- there's ROM which can be flashed even your bootloader still locked. So, it depends on what ROM you wanna use.
Click to expand...
Click to collapse
OK thanks for replying , so let's see.. How can I flash monxdified on a completely new device? I think the device is c9602 since I don't see a 4g on the package..
What is the best custom for this device? What's new on Sony kitkat ? Can we have it for Christmas eve?
bsmstar said:
OK thanks for replying , so let's see.. How can I flash monxdified on a completely new device? I think the device is c9602 since I don't see a 4g on the package..
What is the best custom for this device? What's new on Sony kitkat ? Can we have it for Christmas eve?
Click to expand...
Click to collapse
1. Backup your TA partition (just in case you want to roll back to 4.2.2, and get back your DRM key)
2. Check for updates using OTA or Sony PC Companion
3. If there's update to 4.3, apply the updates
4. Before we step further, I wanna ask you, do you wanna keep your bootloader unlocked?
Well. We don't know when exactly 4.4 update is available. Let's hope we'll get this in December.
Hi
For me it doesn't matter if BL locked or not, I read there is no problem in that in 4.3 regarding camera issues.. But I have zero knowledge on how to deal with rooting and flashing the z1.. Im not going back to 4.2 for me its either aosp 4.4 or Sony ui 4.3. As I said I have zero knowledge so if you can elaborate more about how to do it that would be highly appreciated
hi
so i got the c6903 now... i cant root it and i dunno why
its running on 4.2.2 .257 fw official
i tried vroot it didnt work and 360 root cant be installed it says chinese only os.. how to do that now?
you have to downgrade to 534 to root
bsmstar said:
hi
so i got the c6903 now... i cant root it and i dunno why
its running on 4.2.2 .257 fw official
i tried vroot it didnt work and 360 root cant be installed it says chinese only os.. how to do that now?
Click to expand...
Click to collapse
There is no better way than follow this steps on Page 2, Post #16 http://forum.xda-developers.com/showthread.php?t=2588331&page=2
No body here was clever at the first time so just read carefully. This is the only way to get the full root on your device.
If this help click on thanks.
Well, I found that out through YouTube.. I downgraded my c6903 to 534 fw and rooted it, installed the recovery dual and flashed ihackers 2.1 , yes I did ta backup but I didn't unlock the bootloader. I dunno what's the benefit of doing so, although I emailed Sony and I got the unlock code on my email as they replied... I'm only missing an app that control the led color of notifications led and Google now since I'm not in the US region.. That used to work fine on 4.2.2 but no worries.. Thanks guys. You really helped me a lot and I think this is a great device, I have been using it since Tuesday. And I rooted and flashed it this morning. One problem is that I dunno how to enter recovery so I flashed the ROM right after I flashed the recovery.. I understand now that there is a flashable zip? Things are much easier with the nexus line
bsmstar said:
I understand now that there is a flashable zip?
Click to expand...
Click to collapse
All the FTF have to be flashed on your device via Flashtool v0.9.13 compatible with your device and they are not zip. Recovery is in zip and all what you flash from recovery is in zip file.
Yeah I did that.. It had 257 fw, I flashed 534 with flashtool then I rooted by vroot, then ta backup with some bat file through computer and USB debugging, then installed recovery by bat file as well, which rebooted to recovery, I did factory reset/wipe, and flashed aroma ihackers 2.1 without custom kernel then switched off and flashed baseband and kernel by flashtool and rebooted, done..
Just like that. And you should be the one without knowledge?
Well, I put my mind to it.. And when I do that I usually succeed... But I still have unanswered questions, like what are the benefits of unlocking bootloader? How can I control led light color for different applications notifications.. I tried light flow and illumination bar, both didn't work.. Lastly I haven't got used to the camera ui as I haven't used it much and I already applied xposed 20 mp mod.. Lastly,, I like to thank you for all your attention and care and everything ... I really appreciated it
as i know the unlockbootloader is the only way to flash custom karnels.
i dont know mutch more then that, just switched from ios so i'm new to this.
I forgot to backup my TA does that make an issue and if, what kind?
sorry for thread steeling
bsmstar said:
But I still have unanswered questions, like what are the benefits of unlocking bootloader?
Click to expand...
Click to collapse
Like @stianly said Unlocking Bootlader is needed to flash custom kernels only.
bsmstar said:
How can I control led light color for different applications notifications.. I tried light flow and illumination bar, both didn't work..
Click to expand...
Click to collapse
I read somewhere on XDA about that. EDIT: Try Gravity Box Xposed
stianly said:
as i know the unlockbootloader is the only way to flash custom karnels.
Click to expand...
Click to collapse
Right.
stianly said:
I forgot to backup my TA does that make an issue and if, what kind?
Click to expand...
Click to collapse
Yes, it's a problem, without TA you lost your DRM keys permanently which are needed to re-lock your bootlader. You also lost the warranty of you device definitely.
yea i know the waranty and drm
but what does the drm keys do i lose some functions?
stianly said:
yea i know the waranty and drm
but what does the drm keys do i lose some functions?
Click to expand...
Click to collapse
Yes, Bionz, X-Reality and probably Bravia Engine or something like that but your phone still working properly. Some users do not notice the difference with or without this features.
Ok I tried gravity box, can't find notifications led settings... Can you be more specific on this? Thanks...
bsmstar said:
Ok I tried gravity box, can't find notifications led settings... Can you be more specific on this? Thanks...
Click to expand...
Click to collapse
Sorry, at the moment I don't have my phone so iI can't check for you but Gravity should have some options for that but maybe it's not the solution, I know it's possible, when I will know more something for your problem I will post.
OK thanks
Hello,
Coming from a Galaxy S2 flashing and rooting is not new to me but for me there are some questions for the Xperia Z1.
When i bought the Z1 it was on 4.2.2, and offcourse i wanted root the same day
After trying numerous times with Vroot i gave up.
After some more reading i read that i had to downgrade and then flash an older version, then root and flash teh correct version and so on.....(cant find the correct topics anymore )
After doing that my phone wasnt working properly and i connected with PC Companion and it gave me the update to .290 JB 4.3 and everything was fine except foor root.
Did some more reading and found the solution,
Now I'm reading that if you are on .290 4.3JB that root isnt possible(correct me if im wrong).
I want to share how i did it because for me it went very easy.The hardest part was getting the drivers installed correctly hhaha
First i unlocked the bootloader and then i flashed a CWM with root and recovery.
I followed the steps provided on this links.
http://techbeasts.com/2013/12/18/how-to-unlock-bootloader-of-sony-xperia-devices-guide/
http://techbeasts.com/2013/12/19/in...ng-latest-14-2-0-a-290-firmware-how-to-guide/
Al of this went so easy that i'm startin to wonder if its me who did it wrong and dont understand it or if you didnt know about it,
The only thing i forgot was a TA backup :angel:
to MODS....if its in the wrong section please replace it.
Actually it is the official way. Unlock -> CWM -> Root with CWM (Notification)
Rooting 4.3 isn't impossible, but morr difficult than on earlier versions. Google wanted to improve the security of android. Most of the ways which "make" the opportunity of rooting are malware-ways too.
You don't need to backup your TA partition with .290 and above, because the camera will work after the BL unlock.
The big question is if root for unlocked boot loaders will ever be available for 4.3! I really doubt it.
Sent from my C6903 using xda app-developers app
You mean Locked Bootloader, i think?
Question about CWM, does it function the same as it did with my S2? So, back-up and restore with CWM?
sent from rooted en unlocked 4.3 Jb Xperia Z1
djg269 said:
Question about CWM, does it function the same as it did with my S2? So, back-up and restore with CWM?
sent from rooted en unlocked 4.3 Jb Xperia Z1
Click to expand...
Click to collapse
it should, why are u asking ?
Curious
Eager to try but not in the mood for a complete do over if it fails
sent from rooted en unlocked 4.3 Jb Xperia Z1
Ohh, I will be glad to rooting without unlocking BL...on 4.3..but still no way...
This works just fine, thanks for sharing this! Just FYI, this is also an interesting read about getting full root access on 4.3: http://forum.xda-developers.com/showthread.php?t=2573921
eclyptos said:
Ohh, I will be glad to rooting without unlocking BL...on 4.3..but still no way...
Click to expand...
Click to collapse
I have heard from @shem2409 that a partial root on LB for 290 (4.3) is possible, but I have not figured out how to do it yet. I think you can pull it off with the insecure ramdisk hack, but to install that, you need to install XZDualRecovery; to install XZDR, you need to be rooted; it's only possible to root 534 LB and when upgrading to 290 root is lost. So, it seems to be a chicken-and-egg problem to me at the moment. I think I must be missing something.
xasbo said:
I have heard from @shem2409 that a partial root on LB for 290 (4.3) is possible, but I have not figured out how to do it yet. I think you can pull it off with the insecure ramdisk hack, but to install that, you need to install XZDualRecovery; to install XZDR, you need to be rooted; it's only possible to root 534 LB and when upgrading to 290 root is lost. So, it seems to be a chicken-and-egg problem to me at the moment. I think I must be missing something.
Click to expand...
Click to collapse
That's why I do not rooted mine phone yet. Partial root is not worth to do, full root is what we really need but still under testing and also Unlocked Bootloader is needed. Unlock bootloader we lose the DRM keys which we need if one day we want go back to stock and not lose warranty but to do that we have to Buckup TA. To Backup TA we need root, but I updated to 4.3 and I can't. It's to early to fully rooting 4.3. We have to wait. Developers are working on that and I hope a full root come without unlock bootloader. I hope so.
eclyptos said:
That's why I do not rooted mine phone yet. Partial root is not worth to do, full root is what we really need but still under testing and also Unlocked Bootloader is needed. Unlock bootloader we lose the DRM keys which we need if one day we want go back to stock and not lose warranty but to do that we have to Buckup TA. To Backup TA we need root, but I updated to 4.3 and I can't. It's to early to fully rooting 4.3. We have to wait. Developers are working on that and I hope a full root come without unlock bootloader. I hope so.
Click to expand...
Click to collapse
If you want to backup TA now, you can - flash back to any 534 FTF, root, make your backup, then upgrade back to 290.
xasbo said:
If you want to backup TA now, you can - flash back to any 534 FTF, root, make your backup, then upgrade back to 290.
Click to expand...
Click to collapse
This is what I don't want to do. Unlocking Bootloader on 4.3 will also compromise few features like Bionz and X-Reality. I don't think I really need them but for me will be good enough to have Full Root with Locked Bootlader and Apps to SD. I don't ask to much, so I wait.
eclyptos said:
This is what I don't want to do. Unlocking Bootloader on 4.3 will also compromise few features like Bionz and X-Reality. I don't think I really need them but for me will be good enough to have Full Root with Locked Bootlader and Apps to SD. I don't ask to much, so I wait.
Click to expand...
Click to collapse
You just took those words from my fingers. The wise way here is waiting and cheering developers to figure out how things work with Z1, 4.3 just came a few weeks ago and (hopefully) we will get 4.4 soon, so for that time you'll have to do that trickery again to keep your phones rooted.
AntiDroid said:
Actually it is the official way. Unlock -> CWM -> Root with CWM (Notification)
Rooting 4.3 isn't impossible, but morr difficult than on earlier versions. Google wanted to improve the security of android. Most of the ways which "make" the opportunity of rooting are malware-ways too.
You don't need to backup your TA partition with .290 and above, because the camera will work after the BL unlock.
Click to expand...
Click to collapse
I mistakenly took the .290 update as well and I'm now looking for a way out. This whole backing up the TA thing worries me because I'm afraid I'll lose those DRM keys and bravia etc..... Are you saying that I will be fine and all the keys will be intact if I follow this guide?
Is it possible to downgrade the firmware instead?
What would you suggest?
Thanks
xasbo said:
I have heard from @shem2409 that a partial root on LB for 290 (4.3) is possible, but I have not figured out how to do it yet. I think you can pull it off with the insecure ramdisk hack, but to install that, you need to install XZDualRecovery; to install XZDR, you need to be rooted; it's only possible to root 534 LB and when upgrading to 290 root is lost. So, it seems to be a chicken-and-egg problem to me at the moment. I think I must be missing something.
Click to expand...
Click to collapse
Ok, so here is a little clarification
You need to downgrade to .534, root, install recovery and then flash a prerooted .290 rom from (http://forum.xda-developers.com/showthread.php?t=2572988) or one of the stock-based custom roms such as monxdified (http://forum.xda-developers.com/showthread.php?t=2463675) if you want a partially rooted, locked bootloader 4.3 firmware on your Z1. There is an instruction on how to install on locked bootloader in the thread.
Rooting on the newest version of Android 4.3.3 isn't impossible on the Xperia Z1, it just takes you more steps than normal to actually get full root access. I have a locked bootloader as well but I was able to get a rooted version of Android 4.3.3, specifically the iHackers 2.0 ROM running Android 4.3.3 with full root access. Here's how I got full root access on the iHackers 2.0 ROM:
1) Download the .ftf file named C6903 14.1.G.1.534 Global 1277-2880_R4A from the compiled FTF thread at this link: http://forum.xda-developers.com/showthread.php?t=2469191
This is a version of the original Stock Rom that the VROOT program will actually work on when trying to ROOT your phone.
2) Flash the ROM you downloaded using Flashtool (steps on how you can go about doing that should be in the Xperia Z1 General forum.) and now, you're ready to root your phone with it.
3) Download, install and run VROOT to root your phone. Again, more information on how to properly root your phone using VROOT can be found in the Xperia Z1 General forum. For me, I just turned on USB Debugging on my Z1, connected my phone to my computer while VROOT was running and clicked the green button until I got root access. It's extremely easy.
4) With Root Access, now you can download and install Dual Recovery for the Xperia Z1 on your phone.
5) Download the latest iHackers 2.0 ROM from the Xperia Z1 Android Development thread and copy it to your phone. This is hands down, the best ROM for the Xperia Z1 right now in terms of battery life. With the latest 4.3 update, I'm able to get over 2 Days worth of battery life on one charge. Battery life is much better on the new iHackers 2.0 ROM running Android 4.3.
6) Download the flashable Locked Dual Recovery for the Xperia Z1 here. http://nut.xperia-files.com/
The file is called XZ-lockeddualrecovery2.7.63-BETA.flashable.zip (8.48MB), download it and copy it to your phone, preferably the same place you copied the iHackers 2.0 ROM. To make things easier for yourself, create a new folder on your phone or SD Card in your phone and name it iHackers. Copy both the iHackers 2.0 ROM and the flashable Locked Dual Recovery.zip file into this folder.
7) With both files now copied to a folder on your phone, you're now ready to go into recovery to flash the iHackers 2.0 ROM. Boot into recovery and once you're there, do a Wipe Data/Factory Reset before Installing the ROM.
The rest of these steps are now taken directly from the iHackers 2.0 download thread on the Xperia Z1 Android Development forum.
8) Install the ROM and THEN Dual Recovery. Don't make the same mistake I did, once the installer is finished, DON'T REBOOT THE DEVICE. Uncheck the "Reboot Device" box and go back to recovery to install the flashable Dual Recovery.zip file that's in the iHackers 2.0 folder.
9) Switch Off Your Phone (Do Not Reboot). Select No to Disable Flash Recovery Confirmation.
10) Install Kernel.ftf for C6903 (.290) or Kernel.ftf for C6902 (.290) with Flashtool to get compatible Kernel and Baseband. To download the kernel.ftf file, go to the original iHackers 2.0 thread to download and flash the kernel using Flashtool. You should be familiar with Flashtool at this point since if you make it to this step, you've already used Flashtool once to flash the .534 baseband version of Android.
11) Reboot and Enjoy. Now you're running the latest version of Android 4.3 on your Xperia Z1 on a Locked Bootloader WITH full Root Access. Sure, it's not the stock version but the iHackers 2.0 version of Android 4.3 is just as good, if not better. This will certainly do until there's a better way to simply root the newest Stock Version of Android 4.3.
I've been looking into unlocking my bootloader to install custom kernels on my Z1 but the battery life and performance on my Z1 with a locked bootloader is already pretty impressive. I can't imagine how good it could be with a custom kernel.
deli pastrami said:
Are you saying that I will be fine and all the keys will be intact if I follow this guide?
Click to expand...
Click to collapse
No, if you Unlock Bootloader you will lost the DRM keys permanently with Bionz and X-Reality, even with Android 4.3, if you do not do a backup, but the difference from 4.2 is that your phone will still working properly.
deli pastrami said:
Is it possible to downgrade the firmware instead?
Click to expand...
Click to collapse
Yes.
deli pastrami said:
What would you suggest?
Click to expand...
Click to collapse
Nobody can suggest what to do. You have to figure out by yourself what you need. It's your own risk.
---------- Post added at 12:11 AM ---------- Previous post was at 12:00 AM ----------
x016x said:
Rooting on the newest version ..bla..bla..bla
....bla..bla..bla..bla...king my bootloader to install custom kernels on my Z1 but the battery life and performance on my Z1 with a locked bootloader is already pretty impressive. I can't imagine how good it could be with a custom kernel.
Click to expand...
Click to collapse
Thanx man. I appreciate the time you took to explain the process step by step. One step very important you forgot to mention, Backup TA, never forget to mention that. Anyway I will check if this actually get me full root and all the stuff and when I finally will lose my patient I will start follow the guide and flashing and burning my Z1.
shem2409 said:
Ok, so here is a little clarification
You need to downgrade to .534, root, install recovery and then flash a prerooted .290 rom from (http://forum.xda-developers.com/showthread.php?t=2572988) or one of the stock-based custom roms such as monxdified (http://forum.xda-developers.com/showthread.php?t=2463675) if you want a partially rooted, locked bootloader 4.3 firmware on your Z1. There is an instruction on how to install on locked bootloader in the thread.
Click to expand...
Click to collapse
Ahh, cheers, I thought there was a way to root any arbitrary ROM, that's where I was getting hung up. The pre-rooted options make total sense.
eclyptos said:
Thanx man. I appreciate the time you took to explain the process step by step. One step very important you forgot to mention, Backup TA, never forget to mention that. Anyway I will check if this actually get me full root and all the stuff and when I finally will lose my patient I will start follow the guide and flashing and burning my Z1.
Click to expand...
Click to collapse
The instructions didn't say to unlock the bootloader, which is the only sure-fire way to lose your TA partition. However, I would agree there's no good reason *not* to back it up anyway. Better safe than sorry!
xasbo said:
The instructions didn't say to unlock the bootloader, which is the only sure-fire way to lose your TA partition. However, I would agree there's no good reason *not* to back it up anyway. Better safe than sorry!
Click to expand...
Click to collapse
Ahhh, ok, so you are confirming that the guide is incomplete and we have to unlock bootloader anyway if I follow that? Hmmm...I am a bit puzzled.
eclyptos said:
Ahhh, ok, so you are confirming that the guide is incomplete and we have to unlock bootloader anyway if I follow that? Hmmm...I am a bit puzzled.
Click to expand...
Click to collapse
Sorry, no. In his instructions, UB is not necessary because XZDualRecovery can be installed on LB. The reason skipping the TA backup is okay is because the instructions do not unlock the BL.
Hi guys this is my first post here so be gentle! I'm trying to get cyanogen mod on my Z1.
I have followed the guides on this forum, my appreciation to all involved here great job!
I downgraded to 4.2.2 from 4.3. I then rooted my the phone. I then unlocked the bootloader.
All went ok. I then downloaded C6903_14.2.A.0.290_1276-0875_Generic UK.ftf and flashed it. The phone then wouldn't turn back on.
So I downloaded C6903 14.1.G.1.534 EE UK 1276-2219_R9A (I'm on EE) and flashed that and I got the phone working again.
I then flashed DoomKernal to get CWM. DoomKernal went fine.
Somewhere along the line I think I got confused and thought DoomKernal would give me CWM and I flashed C6903_14.2.A.0.290_1276-0875_Generic UK.ftf again to upgrade back to 4.3.
Same problem...Phone wouldn't turn on so I repeated the EE branded 4.2.2 flash.
Now DoomKernal seems to be taken off. So my questions are as followed:
Do i need DoomKernal to get CWM?
Do i need to be on 4.4 before I install Cyanogen mod or can I do it straight from 4.2.2 with DoomKernal?
If I'm being a total noob I apologize!
Thanks.
Wizber said:
Hi guys this is my first post here so be gentle! I'm trying to get cyanogen mod on my Z1.
I have followed the guides on this forum, my appreciation to all involved here great job!
I downgraded to 4.2.2 from 4.3. I then rooted my the phone. I then unlocked the bootloader.
All went ok. I then downloaded C6903_14.2.A.0.290_1276-0875_Generic UK.ftf and flashed it. The phone then wouldn't turn back on.
So I downloaded C6903 14.1.G.1.534 EE UK 1276-2219_R9A (I'm on EE) and flashed that and I got the phone working again.
I then flashed DoomKernal to get CWM. DoomKernal went fine.
Somewhere along the line I think I got confused and thought DoomKernal would give me CWM and I flashed C6903_14.2.A.0.290_1276-0875_Generic UK.ftf again to upgrade back to 4.3.
Same problem...Phone wouldn't turn on so I repeated the EE branded 4.2.2 flash.
Now DoomKernal seems to be taken off. So my questions are as followed:
Do i need DoomKernal to get CWM?
Do i need to be on 4.4 before I install Cyanogen mod or can I do it straight from 4.2.2 with DoomKernal?
If I'm being a total noob I apologize!
Thanks.
Click to expand...
Click to collapse
Accidently gave you a thank lol
I actually don't know about branded phone, but I can tell you that your step has gone wrong. You will always lose root
if you flash a sock ftf file.
So you are saying you unlocked bootloader on the 534 rom? Your camera is probably dead now, check it if you can boot.
Unlocking bootloader before getting on 4.3 or 4.4 will result in disabling the camera. You did it now anyway, I can't help you. Maybe flash 4.4 now and see if your camera works again.
Flashing cyanogen is not about root but unlock bootloader, people would recommend you to root first becoz you will be able to do TA back up with root
(TA backup is a way to backup drm key, so you can restore it in the future and restore locked bootloader exclusive feature like X reality and better quality camera. Seems you don't know what I'm talking about and already unlocked the bootloader before you even ever heard about TA. Sorry can't help you to save this part, you may continue anyway)
So on 4.4, you may have to unlock the bootloader again since the bootloader itself maybe relocked itself when you flash a sock ftf file. ( doesn't mean you restored DRM key is back)
So maybe unlock it again and start to flash cm.
Personally I wouldnt recommend a newbie in Android to unlock bl so fast since it's too easy to mess up serious things up and it's not so easy for turning back. Well you started messing them up anyway, continue then
Thanks for the reply.
I did do a TA back up before I unlocked the bootloader....If i restore from this will it get the camera working?
I have tried to flash Cyanogen mod but it fails error 7. It thinks my Z1 is a Togari (Z ultra) which it isnt cant find anything on this!
Ok so, i'll try and get on 4.4...
I have a UK Z1 C6903.
Can I flash to C6903 14.3.A.0.681 Global 1277-2880_R5C (this is 4.4 right?)
OR does it have to be a UK one I cant seem to find a uk 4.4?
So after a bit of stress and the phone getting stuck in bootloop I have installed 4.4.2 using .681 commercial.
I hope it will be smooth sailing now to install cyanogen mod
Oh and the camera works again!
Wizber said:
Thanks for the reply.
I did do a TA back up before I unlocked the bootloader....If i restore from this will it get the camera working?
I have tried to flash Cyanogen mod but it fails error 7. It thinks my Z1 is a Togari (Z ultra) which it isnt cant find anything on this!
Ok so, i'll try and get on 4.4...
I have a UK Z1 C6903.
Can I flash to C6903 14.3.A.0.681 Global 1277-2880_R5C (this is 4.4 right?)
OR does it have to be a UK one I cant seem to find a uk 4.4?
Click to expand...
Click to collapse
happy to hear that u actually did TA backup
any 4.4 should be fine
after that install doomlord advanced stock kernel v2 i think
hi,
my camera stopped working after flashing a 4.4.2 stock based rom.
i am on ub but without Ta backup. The camera doesnt take pictures and cant focus. it was allright before udpate.
i even downgraded to stock 4.2.2 to see if its working but no, it is not
Any help? Or as i understand i lost my cam forever?
-EDIT-!! After playing around a long time at night, it started to work again on .290 ftf
idk what it was and what it was caused by.
But it seems that sony has problems with the 4.4 update in general.
thanks anyway
Edit2 - actually it is only working on 290. O.0 strange! as i upgrade to lower or newer firmware it stopps working.
Has anybody got an idea?
Good for you, I hear someone saying that there still a possibility, without TA, to lose the cam forever.
..and yes, KK have been reported with many bugs but not with the cam actually.
Good luck.
eclyptos said:
Good for you, I hear someone saying that there still a possibility, without TA, to lose the cam forever.
..and yes, KK have been reported with many bugs but not with the cam actually.
Good luck.
Click to expand...
Click to collapse
Well i think i will relock my BL and stay for stock. I hope i will be able to upgrade to 4.4 with camera feature. Because now it is only working on 290. ftf.
What the hell is that. Never happened before to me so strange
Thankx
LLars_PL said:
Well i think i will relock my BL and stay for stock. I hope i will be able to upgrade to 4.4 with camera feature. Because now it is only working on 290. ftf.
What the hell is that. Never happened before to me so strange
Thankx
Click to expand...
Click to collapse
Relock BL without TA do not have sense. It will not work anyway so try to keep .290 for now and soon a fix will come, or try the new KK when it will roll out, with new fixes.
eclyptos said:
Relock BL without TA do not have sense. It will not work anyway so try to keep .290 for now and soon a fix will come, or try the new KK when it will roll out, with new fixes.
Click to expand...
Click to collapse
i made it out- just flash 290. then flash original kit kat ftf and it will work. And keep your BL unlocked do not play with flashtool
LLars_PL said:
And keep your BL unlocked do not play with flashtool
Click to expand...
Click to collapse
Thanks, I thought it was not safe flashtool for play with Bootloader, always use the Original Backup TA App. Good you solved. :good:
eclyptos said:
Thanks, I thought it was not safe flashtool for play with Bootloader, always use the Original Backup TA App. Good you solved. :good:
Click to expand...
Click to collapse
Yes as long as you have a Ta-Backup which i have not, luckily i made it out :good:
Yes as long as you have a Ta-Backup which i have not, luckily i made it out
Click to expand...
Click to collapse
So tell me exactly what did you do to repair camera issue? I'm now on RomAur v6.3 with unlocked bootloader and camera doesn't focus or take pictures... If I understood you correctly I'll have to flash C6903_14.2.A.0.290_Stripped.ftf and than C6903_14.3.A.0.681_Stripped.ftf all without TA(only TA? maybe I'll have to check something else?) using flashtool to made it work again? or do I have to flash original firmware or what?
adamkx7xdesire said:
So tell me exactly what did you do to repair camera issue? I'm now on RomAur v6.3 with unlocked bootloader and camera doesn't focus or take pictures... If I understood you correctly I'll have to flash C6903_14.2.A.0.290_Stripped.ftf and than C6903_14.3.A.0.681_Stripped.ftf all without TA(only TA? maybe I'll have to check something else?) using flashtool to made it work again? or do I have to flash original firmware or what?
Click to expand...
Click to collapse
Well, you missunderstood the Ta thing Did you make a TA-Partition Backup BEFORE unlocking the bootloader? If yes- Just restore it & you are fine.
If not, thats what you have to do/what i did to make it work.
First of all NOT STRIPPED ftf`s becasue it is only the kernel as far as i know. You have to download the whole original rom which is about 1gb.
+Edit. Do not exclude any options in Flashtool like Ta, kernel or anything else !!!! Just choose your ftf and flash!
First flash original 290. FTF with your branding (for me it was vodafone)
The camera should work there. If yes continue.
Flash original 681. ftf with your branding if possible.
The cam should work there too. If yes continue.
Now you are good to go, put your custom rom on SD Card-
Flash custom kit kat kernel/or stock with recovery
Boot into CWM and flash your Rom. Your Cam should work.
LG
LLars_PL said:
Well, you missunderstood the Ta thing Did you make a TA-Partition Backup BEFORE unlocking the bootloader? If yes- Just restore it & you are fine.
If not, thats what you have to do/what i did to make it work.
First of all NOT STRIPPED ftf`s becasue it is only the kernel as far as i know. You have to download the whole original rom which is about 1gb.
+Edit. Do not exclude any options in Flashtool like Ta, kernel or anything else !!!! Just choose your ftf and flash!
First flash original 290. FTF with your branding (for me it was vodafone)
The camera should work there. If yes continue.
Flash original 681. ftf with your branding if possible.
The cam should work there too. If yes continue.
Now you are good to go, put your custom rom on SD Card-
Flash custom kit kat kernel/or stock with recovery
Boot into CWM and flash your Rom. Your Cam should work.
LG
Click to expand...
Click to collapse
that's odd.... but I've flashed Xperia Z1 C6903 14.3.A.0.681 Commercial&Journalist w/o TA (before you told me that I should't exclude anthing) than I find out that the camera works and than I decided to flash DooMKernl v11 and RomAur 6.3 without any other steps and everything is working ok so far...
adamkx7xdesire said:
that's odd.... but I've flashed Xperia Z1 C6903 14.3.A.0.681 Commercial&Journalist w/o TA (before you told me that I should't exclude anthing) than I find out that the camera works and than I decided to flash DooMKernl v11 and RomAur 6.3 without any other steps and everything is working ok so far...
Click to expand...
Click to collapse
Well nice,but only because you were able to take pictures and your camera wasn`t that broken as mine was probably
LG
LLars_PL said:
i made it out- just flash 290. then flash original kit kat ftf and it will work. And keep your BL unlocked do not play with flashtool
Click to expand...
Click to collapse
I think that I have the exact same problem (no autofocus, no picture/video, no TA backup and unlocked bootloader).
I know that there was camera issues with unlocked bootloader that was fixed by Sony at some point (maybe the .290 ?), it can be an explanation...
If I understand correctly I need to flash .290 ftf with flashtool, then kit kat still with flashtool ?
Will I still have a rooted phone after that ?
I'm glad I finally found someone with the same problem, and someone that managed to solve it !
Swatch_n7 said:
I think that I have the exact same problem (no autofocus, no picture/video, no TA backup and unlocked bootloader).
I know that there was camera issues with unlocked bootloader that was fixed by Sony at some point (maybe the .290 ?), it can be an explanation...
If I understand correctly I need to flash .290 ftf with flashtool, then kit kat still with flashtool ?
Will I still have a rooted phone after that ?
I'm glad I finally found someone with the same problem, and someone that managed to solve it !
Click to expand...
Click to collapse
Skip .290 and upgrade to KK directly. To keep Root you have to follow [NUT] instructions on his thread.
eclyptos said:
Skip .290 and upgrade to KK directly. To keep Root you have to follow [NUT] instructions on his thread.
Click to expand...
Click to collapse
Ho but I am already on Kit Kat, and like LLars_PL I have camera issues. So I was wondering if I need to downgrade to .290 then reupgrade to KK, and if I'll still have a rooted handset, with working camera (JB or KK, as long as it's rooted with the camera working...)
Thanks anyway !
Edit : just saw that in [NUT] thread :
Camera problems?
You have 3 things to try to fix it, try them one at a time:
Clear dalvik-cache only;
Clear the camera app settings;
Do a factory reset in TWRP or PhilZ (this should keep your internal storage safe);
flash the ROM package again;
boot until you can test the camera;
If it works go back to recovery to restore a backup of data.
Click to expand...
Click to collapse
I'll try as soon as I can.
Swatch_n7 said:
Ho but I am already on Kit Kat, and like LLars_PL I have camera issues. So I was wondering if I need to downgrade to .290 then reupgrade to KK, and if I'll still have a rooted handset, with working camera (JB or KK, as long as it's rooted with the camera working...)
Thanks anyway !
Click to expand...
Click to collapse
In this case I think is better to start from scratch as the downgrade is recommended with Full Wipe. Then you should downgrade to .534, Root it and Upgrade with another Full Wipe to KK. Clean installation should fix the problem.
eclyptos said:
In this case I think is better to start from scratch as the downgrade is recommended with Full Wipe. Then you should downgrade to .534, Root it and Upgrade with another Full Wipe to KK. Clean installation should fix the problem.
Click to expand...
Click to collapse
Thank you !
I'll wait because the solution posted by LLars_PL seems a little less brutal, but if that or [NUT]'s solution doesn't work, I'll certainlly do that.
Swatch_n7 said:
Thank you !
I'll wait because the solution posted by LLars_PL seems a little less brutal, but if that or [NUT]'s solution doesn't work, I'll certainlly do that.
Click to expand...
Click to collapse
Hehe yeah, the downgrade to 290.was needed for me.
eclyptos said:
In this case I think is better to start from scratch as the downgrade is recommended with Full Wipe. Then you should downgrade to .534, Root it and Upgrade with another Full Wipe to KK. Clean installation should fix the problem.
Click to expand...
Click to collapse
Downgrade to 534. Did not work for me
You dont need to root, just do it with 290.flash a original Kit kat ftf over 290.and then just Flash a Kit kat Kernel with cwm - Flash your custom Rom with root already
Wysłane z mojego C6903 przy użyciu Tapatalka
My wife has a completely stock (with original Sony ROM), installed the OTA to 4.4.2 and now the camera doesn't work.
Her phone is completely unmodified as it came of the box, sounds like I might have unlock it and install a custom ROM to fix what I can only assume is a bug with Sony's firmware update.
I suppose I should try contacting Sony support first, but phone/online support is usally mostly useless.
I've flashed the original 14.3.A.0.757 and now my camera is working again
Of course I lost the root (and the recovery ?!) so I need to sort this out now.
I've found that i have a weird problem with my Camera, the sound look like in mono when i listen to the sound, i've tried another app that just record sound and it's perfect, that make this only with the camera, any idea?
Hello,
I've been using Xperia Z1 for some longer time on KitKat, but I've noticed that it's much slower than android 4.3 I used to have on my Xperia Z.
So I've decided to downgrade to 4.3, but unfortunatelly Viper4android isn't fully supported on this version so I wanted to go even lower to try, whether everything works well there.
It took me few hours untill I found out how to properly downgrade to 14.1.G.2.257 and keep the antenna working.
However after short time I've noticed that the camera focus wasn't working at all.
I've tried about 3 different ROMS (all 14.1.G.2.257, did a full wipe), but the auto focus wasn't working on all of them.
Do You know some way to fix it (I've tried the camera fix but it didn't help) or a reason why it isn't working?
I'm planning to downgrade even to 14.1.G.1.534 this weekend, hopefully everything will work there.
Your bootloader isn't unlocked?
Sent from my D6503 using Tapatalk
funky0308 said:
Your bootloader isn't unlocked?
Sent from my D6503 using Tapatalk
Click to expand...
Click to collapse
Nah, It's unlocked for 100%.
I can change my kernels however I want.
mr.loverlover said:
Nah, It's unlocked for 100%.
I can change my kernels however I want.
Click to expand...
Click to collapse
Well there's your answer..
Apparently, users reported many problems on older firmwares with unlocked bootloader...
Try to Google that and you'll get your answers...
Sent from my D6503 using Tapatalk
funky0308 said:
Well there's your answer..
Apparently, users reported many problems on older firmwares with unlocked bootloader...
Try to Google that and you'll get your answers...
Sent from my D6503 using Tapatalk
Click to expand...
Click to collapse
Really? A locked bootloader is the issue?
I'll google for that, however now I don't know if I want to relock it
mr.loverlover said:
Really? A locked bootloader is the issue?
I'll google for that, however now I don't know if I want to relock it
Click to expand...
Click to collapse
No...unlocked bootloader could be issue.
Now I really don't get you...
Do you have locked or unlocked bootloader?
Sent from my D6503 using Tapatalk
unlocked bootloaders on those firmware break the camera
Just upgrade to 4.3 or 4.4 roms.
The warning is clear on the sony website about unlocking the bootloader on 4.2 roms.
Plus I must ask, if you have unlocked the boot, why bother downgrading?
Fix for camera
This is how I did it
I have Z1 6902 UB
1. Flash .757 ORIGINAL file. Not NUT. Wipe everything! Use Latest Flashtool
Check that camera works!
2. Connect your phone in fastboot mode and flash boot.img from kernel package Z1-XZDRKernel2.7.127-BETA.flashable
3. Flash Z1-XZDRKernel2.7.127-BETA.flashable in recovery
4. Flash UPDATE-SuperSU-v2.00 in recovery
5. Reboot and camera works.
i got the same problem
My camera dident focus too, i have a 6902 OB and i flash diferent kernels DooMKernel (v21) flash diferent version via flashtool(last version) and of course try to restore the phone but nothing works, how do you fix this isue?
my camera start malfuntion because im retard and i think i touch something whit link2sd, after noticed i try to restore and flash but no luky, later i open the bootloader hopping for a new kernel fix this but nothing :crying:
Any idea?