[Help XT1058 ATT] Bricked after flashing (Solved) - Moto X Q&A

Hey guys,
I made the biggest mistake and have been trying to find a solution. Long story short, I have bricked my Moto X xt1058. I can only load into the bootloader, which is locked. When doing any kind of boot, it will pop up a Motorola logo then go to a black screen.
After a few seconds you can sometimes see a green android guy that looks like it says no command quickly flash and go away.
Now my mess up was not paying attention to the ROM I was flashing and flashing a 4.4.4 rom to a 5.1 bootloader (30.BE).
Has anyone got a solution or any help for me?
Update:
Turns out, I needed to flash a newer 5.1 than I could find before. Flashed everything from the update and my phone booted after everything.

Related

[Q] {Q}Please Help me out. Stopped Flashing Eclipse 3.0 install on formatting..

Hello everybody, I am a bit new to Android, but have already owned the HTC ONE rooted unlocked it and flashed all diff good ol roms.
I switched to MOTO X and love this phone.
I really hope someone can help me out.
Since I have less than 10 posts, I cannot ask a question within the Eclipse thread.
I have rooted my Moto X and was able to flash Eclips 2.2 and loved it! When Eclipse 3.0 was released yesterday I naturally grabbed it to install.
I wiped as instructed and started to flash, it was stuck on formatting for a very long time, and dumbass me just restarted the phone.
Big mistake. Now my phone is stuck on the initial Motorola splash screen.
I cannot get into recovery, the Hboot screen tells me "Flash Failure". I tried flashing a new copy of Safestrap through the moto x toolkit, the phone tells me "invalid image size for partition recovery".
I am running a windows 7, my computer sees the phone when its in Hboot.
PLEASE PLEASE direct me to the right place to fix this.
THANKS IN ADVANCE

[Q] Help!!!! Logo.bin Problems (Droid Turbo)!!!

Is there anyone out there that could help me fix my issue? While attempting to flash a new boot logo on my Verizon Droid Turbo I ran into some issues... I was running a program for replacing the bootloader unlocked message on a previous Motorola thinking oh hey this thing has got to have a very similar setup... I later realized it is different, very different. The difference is the bootloader, recovery mode, and the logo which shows for the drained battery are all intertwined together. So basically I could take the system dump logo.bin and flash it over the current logo, but the trouble is I have completely lost access to my bootloader menu, absolutely nothing is available, and I cannot use adb commands to access it either. I am totally stumped and with root access now available I am very bummed. Might just have to bring my phone in and tell them, in the famous words of Towley. "I have no idea what's going on..." Any help would be greatly appreciated! My only other option at this point I suspect is to wait until OTA lollipop and hope that the update re-installs my logo.bin file as well.

[Q] Moto X completely stock Verizon stuck on boot screen. HELP!

Hello , I have a Moto X first gen Verizon model . Stock Bootloader locked and non rooted. It was working fine and just randomly switched off and won't completely boot back up again, It is stuck at the Boot screen with The Moto X Blue Logo . Running 4.4.4 . I tried doing a reset it didn't work. I tried going into recovery it didn't work , it comes back to the boot logo.
Any suggestions ? Please help. ?
galaxys3lover said:
Hello , I have a Moto X first gen Verizon model . Stock Bootloader locked and non rooted. It was working fine and just randomly switched off and won't completely boot back up again, It is stuck at the Boot screen with The Moto X Blue Logo . Running 4.4.4 . I tried doing a reset it didn't work. I tried going into recovery it didn't work , it comes back to the boot logo.
Any suggestions ? Please help. ?
Click to expand...
Click to collapse
I would boot into bootloader mode and flash stock system.img and boot.img.
JulesJam said:
I would boot into bootloader mode and flash stock system.img and boot.img.
Click to expand...
Click to collapse
Thank you so much for replying.. Could you give me instructions on how to do that? Also where can I get the system files for my phone?
Kind of dissapointed that you created a thread, asked in multiple places, and PM'd me the same question/issue. Especially considering it was 4AM eastern time when you started asking... (non of us in the USA would have been on, or well, very very few would have been on)
For those watching... I've posted a few replies and suggestions after post 191 in this thread -> http://forum.xda-developers.com/moto-x/moto-x-qa/help-thread-moto-x-question-t3032022/page8
KidJoe said:
Kind of dissapointed that you created a thread, asked in multiple places, and PM'd me the same question/issue. Especially considering it was 4AM eastern time when you started asking... (non of us in the USA would have been on, or well, very very few would have been on)
For those watching... I've posted a few replies and suggestions after post 191 in this thread -> http://forum.xda-developers.com/moto-x/moto-x-qa/help-thread-moto-x-question-t3032022/page8
Click to expand...
Click to collapse
I know , I am sorry , i was just really freaked out .. please go ahead and delete the other thread. I apologize.
Thank you so much for your patience and help. I have tried unlocking the bootloader and flashing stock firmware (both were succesfull) but the problem still remains , it is stuck on the boot screen. (earlier at the MOTO M Logo and now at Warning Bootloader unlocked screen) . There are no service centers where I Live so I can't send it to a service center , is there any last resort methods I could try ? Once again , Sorry and Thank you.
galaxys3lover said:
I know , I am sorry , i was just really freaked out .. please go ahead and delete the other thread. I apologize.
Thank you so much for your patience and help. I have tried unlocking the bootloader and flashing stock firmware (both were succesfull) but the problem still remains
Click to expand...
Click to collapse
Did you flash using RSDLite? That is the safest thing to do. Also, did you enable USB debugging and authorize your computer?
If not using RSD lite, how are you flashing back to stock?
Also, have you tried installing Motorola Device Manager and letting it repair your phone? You get into bootloader mode and then plug your phone into your computer and start MDM.
JulesJam said:
Did you flash using RSDLite? That is the safest thing to do. Also, did you enable USB debugging and authorize your computer?
If not using RSD lite, how are you flashing back to stock?
Also, have you tried installing Motorola Device Manager and letting it repair your phone? You get into bootloader mode and then plug your phone into your computer and start MDM.
Click to expand...
Click to collapse
I manually flashed the stock firmware with mfasboot , will try the MDM and let you know .
galaxys3lover said:
Hello , I have a Moto X first gen Verizon model . Stock Bootloader locked and non rooted. It was working fine and just randomly switched off and won't completely boot back up again, It is stuck at the Boot screen with The Moto X Blue Logo . Running 4.4.4 . I tried doing a reset it didn't work. I tried going into recovery it didn't work , it comes back to the boot logo.
Any suggestions ? Please help. ?
Click to expand...
Click to collapse
I've struggled with a similar issue on an XT1053, though mine already had an unlocked bootloader. Phone freaked out, shut down, and now crashes every time a few seconds after it gets to the blue logo., and goes into endless bootloops. Here for more detail -http://forum.xda-developers.com/moto-x/moto-x-qa/boot-loop-puzzle-t3080565
Since I've flashed the stock images a couple of times (which seems to work, or at least shows no errors), I think it might be a hardware or battery issue. I'll try MDM, but am not especially optimistic.
Had you installed any new apps? I had been playing a new driving game on the day it crashed, though it might be coincidence.

Moto x 2nd generation hard bricked(xt1092)

Hi there,
I bought a moto x 2nd gen from India. i just rooted it and update it to cm13. when my phone got official update of marshmallow i just used moto x multi tool to downgrade it..first i downgraded it to kitkat. it done versy smoothly and i got my phone with kitkat. Next again i used same tool to upgrade it to lolipop. i checked whether my usb debug is on or not..it was on..then when i upgraded it it just done successfully and when i reboot my phone from fastboot mode it doesn't boot up...no it is hard bricked...only green light is blinking when hold the power button and when plug it to pc..when i google it i saw that many people have got this problem..all are nee blank flash file..so is there any solution for this??? i have got a stock lolipop zip file....can anyone help me????
Hi!
This is the wrong section for help. Your device has a section here, http://forum.xda-developers.com/moto-x-2014
And you can post questions here, http://forum.xda-developers.com/moto-x-2014/help
And specific to your issue, you can review this thread here, http://forum.xda-developers.com/moto-x-2014/general/warning-downgrade-bootloader-partition-t3105147
Good luck!
Hi guys,
I bought a moto Xt1092 from India. i just rooted it and install cm14.1. but,jio4gvoice not working cm14.1. then I install stock rom kitkat my phone and got official update of marshmallow. i just update system software and install it. then software full installation complete and my phone shut sown and can't on my phone.when phone is charging then green light blinking. and not show bootloader menu either recovery menu.can anyone help me want to bootloader menu return????plzzzz anybody help me.

Moto G 2014 Soft-bricked, Can't get past 'Warning: Bootloader Unlocked' screen, help

Hey guys, I have this phone that I got and it looks like it is soft-bricked. When I charge and turn it on, I am unable to get past the 'Warning: Bootloader Unlocked' screen. and it stays there.
So far I download ADB for my command-prompt and I downloaded the stock firmware. I don't think I can get into any modes by using the buttons but maybe on the ADB?
So can anyone help a noobie flash a stock firmware? I looked at softbricked Moto g2 threads but my question wasn't answered so I thought I would make a thread. Thanks guys! :good:
It's pretty easy just reflash stock firmware using this link : Easy Installer 5.0.2
All information is given in the thread.

Categories

Resources