xPosed issue.. - Nexus 6 Q&A, Help & Troubleshooting

I have a N6/Pure Nexus/6.0.1/MMB29T. I loaded xPosed 79 ARM 23 zip in recovery. Afterwards the phone is super slow to where I have to use the uninstaller. No modules are installed after framework. Using 3 alpha 4 APK.
Why? Does it have to be installed elsewhere? What do I have to do to make xPosed work?

Scottay5150 said:
I have a N6/Pure Nexus/6.0.1/MMB29T. I loaded xPosed 79 ARM 23 zip in recovery. Afterwards the phone is super slow to where I have to use the uninstaller. No modules are installed after framework. Using 3 alpha 4 APK.
Why? Does it have to be installed elsewhere? What do I have to do to make xPosed work?
Click to expand...
Click to collapse
Your best bet is to run a logcat and post it in the xposed thread. Most rom devs dont support xposed due to the issues it can cause.

Scottay5150 said:
I have a N6/Pure Nexus/6.0.1/MMB29T. I loaded xPosed 79 ARM 23 zip in recovery. Afterwards the phone is super slow to where I have to use the uninstaller. No modules are installed after framework. Using 3 alpha 4 APK.
Why? Does it have to be installed elsewhere? What do I have to do to make xPosed work?
Click to expand...
Click to collapse
Here's the log..

Scottay5150 said:
Here's the log..
Click to expand...
Click to collapse
In the Xposed thread. Here is the link for the Xposed Marshmallow discussion thread. http://forum.xda-developers.com/xposed/discussion-xposed-marshmallow-t3249095

Related

[Q] Xposed modules ?

Hi,
Ardent user of WSM here, but since the library of Xposed is much much bigger than WSM, let's share on this thread which all Xposed modules work with Xiaomi Mi3. :highfive:
Danke !
alekhkhanna said:
Hi,
Ardent user of WSM here, but since the library of Xposed is much much bigger than WSM, let's share on this thread which all Xposed modules work with Xiaomi Mi3. :highfive:
Danke !
Click to expand...
Click to collapse
Hi on stock miui rom i installed the following and are working great :
1. Boot manager
2. DoubleTapToSleep
3. Greenify
4. Mi-Tools
5. MinMinLock
6. ScreenOffAnimation
7. Xclip
Cheers!:good:
sivabommakanti said:
Hi on stock miui rom i installed the following and are working great :
1. Boot manager
2. DoubleTapToSleep
3. Greenify
4. Mi-Tools
5. MinMinLock
6. ScreenOffAnimation
7. Xclip
Cheers!:good:
Click to expand...
Click to collapse
Did you just install Xposed Framework from xda and then the modules one by one?
Using YouTube ad away. It works with WSM.
Sent from my MI 3W using XDA Free mobile app
reneftw said:
Did you just install Xposed Framework from xda and then the modules one by one?
Click to expand...
Click to collapse
You can install wsm tools which uses Xposed Framework as base and then you can use all the xposed modules.
reneftw said:
Did you just install Xposed Framework from xda and then the modules one by one?
Click to expand...
Click to collapse
U should not install xposed framework. U need to install wsm tools & then install the modules. Or else u will end up in bootloop
HK theme manager
Does any one tried HK theme manager module, does it works. Can I install CM 11 themes on it?
Thanks
navinshark said:
Does any one tried HK theme manager module, does it works. Can I install CM 11 themes on it?
Thanks
Click to expand...
Click to collapse
Do not try any of the modules meant for AOSP ROMs as MIUI is heavily moded & conflicts with the already included xposed framework. As far as i know u cant install that module.
Thank you, will wait for nighty CM 11 then.

Exposed framework

Does anybody use an exposed framework on P7-L10?
kriticar said:
Does anybody use an exposed framework on P7-L10?
Click to expand...
Click to collapse
I don't think it matters which variant of the P7 you have. I recently tried a custom ROM by Lishuo which is based on B124 for the L07. Even Xposed 2.5 wouldn't install. I have no problem with my current ROM although I can't upgrade Xposed beyond V2.5. I suspect the earlier builds of the P7 stock ROMs are compatible (up to a point) with Xposed, but the later builds are not.
I'm on stock rom and I use Xposed version 2.5
Some module works, but most of them don't, which is sad. I mainly use it for gravity box which work at 85% I would say.
Stock B126 with Exposed 2.6.1
But using only for XPrivacy.
u.hedt said:
Stock B126 with Exposed 2.6.1
But using only for XPrivacy.
Click to expand...
Click to collapse
The problem is not the version of Xposed, the thing is you could be using the latest 2.7 version but it doesn't work on our devices for any "theming" thing. I guess it would work for XPrivacy but not if you want to use, lets say, GravityBox to theme the navbar.
I've had Xposed for some time, used it for Snapchat modules, and it worked fine. I installed GravityBox [KK] today and for some reason whenever I try to open it I get "GravityBox system framework not responding. Exiting."
Is it because I don't have theme engine disabled or is it something else?
sarcastical said:
I've had Xposed for some time, used it for Snapchat modules, and it worked fine. I installed GravityBox [KK] today and for some reason whenever I try to open it I get "GravityBox system framework not responding. Exiting."
Is it because I don't have theme engine disabled or is it something else?
Click to expand...
Click to collapse
I had it when I was using Xposed 2.6 or higher or when I didn't reboot my phone after instaling it (which is dumb ... I just forgot xD)
I'm now on 2.5.1 and I didn't touch disable nor enabled theme engine, I left it as it was when I installed Xposed 2.5.1
PrimuSSaintS said:
I had it when I was using Xposed 2.6 or higher or when I didn't reboot my phone after instaling it (which is dumb ... I just forgot xD)
I'm now on 2.5.1 and I didn't touch disable nor enabled theme engine, I left it as it was when I installed Xposed 2.5.1
Click to expand...
Click to collapse
So I just need 2.5.1?
sarcastical said:
So I just need 2.5.1?
Click to expand...
Click to collapse
As far as I know, yes it should work
I just rooted my P7 and try instaling latest xposed. I have this error and framework is not instaling.
Should I install custom recovery too ?
Huawei Ascend P7-10 by Tapatalk2
Ziółek said:
I just rooted my P7 and try instaling latest xposed. I have this error and framework is not instaling.
Should I install custom recovery too ?
Huawei Ascend P7-10 by Tapatalk2
Click to expand...
Click to collapse
Just follow the steps that are given here :
http://forum.xda-developers.com/showpost.php?p=53291974&postcount=200&nocache=1&z=1143765179790447
be aware that by instaling the latest Xposed version you might not use all the tweaks availables
PrimuSSaintS said:
...be aware that by instaling the latest Xposed version you might not use all the tweaks availables
Click to expand...
Click to collapse
Hi,
Which version of Xposed do You recommend to reduce this limitations ?
EDIT:
I tested Xposed versions: 2.6 and 2.4.1 and 2.5
In ver. 2.6 You have to check on "Disable resources hook" option in settings. Another way Xposed don't start and inform about incompatibility with our devices . But with this option many module are blocking and dont work.
In ver. 2.4.1 and 2.5 There isn't this this restriction and Xposed starting normally and some module (blocked in ver 2.6) work properly but many also don't work.
In addition, this version changes the icons in the home screen theme. :thumbdown:
In any way on rom (B135) I can't use GravityBox module (irrelevant Xposed version). GravityBox interface don't even launch
And last problem. So, I didn't make backup set_immutable.list file o) . Somebody can help me and upload this file ?
Ziółek said:
In any way on rom (B135) I can't use GravityBox module (irrelevant Xposed version). GravityBox interface don't even launch
And last problem. So, I didn't make backup set_immutable.list file o) . Somebody can help me and upload this file ?
Click to expand...
Click to collapse
I can only speak about the B121-126 which were the two version I used. On both, gravitybox was working perfectly with Xposed 2.5.1 (when I say perfectly, I mean about 85% of the tweaks were working)
Hey, I still have a problem with GravityBox (KK).
I am trying to use this module in the second ROM (B135 and now B136) but always have the same issue when trying to launch (see screenshot).
Any suggestions ? Did someone similar problem ?
Xposed ver 2.5.1
Sent from my HUAWEI P7-L10

[DISCUSSION] Xposed for Marshmallow

You can use this thread for discussions about Xposed for Marshmallow. Please check the read-only thread for the download links and official updates.
Going to post of list of modules that work after flashing in a few mins.
Here's the thread I made for it.
http://forum.xda-developers.com/xposed/unofficial-list-modules-xposed-t3249162
Is this update can be installed on 5.0.2 becouse I have problems whit modules not active after update so need to reboot phone at least two times..Thanks
djtiesto22 said:
Is this update can be installed on 5.0.2 becouse I have problems whit modules not active after update so need to reboot phone at least two times..Thanks
Click to expand...
Click to collapse
There will be a lollipop update within a few days.
Nexus 5 Cataclysm and ElementalX
Just flashed, gonna check and see what works. Nice break from working on my new pool pump, thanks @rovo89!
Finally! Thanks rovo89
Nexus 6P is ARM64
I just rooted my HTC One a9. It's not s-off yet. Can I still install xposed and if so which .zip is for me? Thanks.
Which modulds i need for working on nexus 6 cause there is some v76 module and i dont know what to use arm or x86 pleaee help
Thanks for your continued works, will flash now.
So far is looks like xposed gel settings doesn't work on Marshmallow hopefully soon
ohad129 said:
Which modulds i need for working on nexus 6 cause there is some v76 module and i dont know what to use arm or x86 pleaee help
Click to expand...
Click to collapse
Nexus 6(2014) is a arm32 device, use -arm.
ohad129 said:
Which modulds i need for working on nexus 6 cause there is some v76 module and i dont know what to use arm or x86 pleaee help
Click to expand...
Click to collapse
Use ARM for Nexus 6. ARM64 is for 64 bit processors and x86 is for Intel based chipsets.
Flashed version 76-ARM on my Nexus 6. Installed the apk and rebooted. Xposed framework is installed but not active. Anyone else having this issue?
SuperSmashedBro said:
Nexus 6P is ARM64, correct?
Click to expand...
Click to collapse
Yes it is.
riqdiq said:
Flashed version 76-ARM on my Nexus 6. Installed the apk and rebooted. Xposed framework is installed but not active. Anyone else having this issue?
Click to expand...
Click to collapse
same here on nexus 6P
riqdiq said:
Flashed version 76-ARM on my Nexus 6. Installed the apk and rebooted. Xposed framework is installed but not active. Anyone else having this issue?
Click to expand...
Click to collapse
Same on my Nexus 7 with M(MRA58V), be posting logs later.
ncsuwolfs said:
same here on nexus 6P
Click to expand...
Click to collapse
Did you flash arm or arm64? That device need arm64
riqdiq said:
Flashed version 76-ARM on my Nexus 6. Installed the apk and rebooted. Xposed framework is installed but not active. Anyone else having this issue?
Click to expand...
Click to collapse
As always - please post a logcat, otherwise I can't help you. Maybe the Xposed log will also be sufficient, that depends on the cause of the issue.
11-14 23:06:20.819 E/Xposed ( 316): Cannot load any modules because /data/data/de.robv.android.xposed.installer/conf/modules.list was not found
Click to expand...
Click to collapse
^This is all I'm getting after installing the APK and flashing the Zip with TWRP afterwards. (Shamu, Chroma, 6.0, Stock kernel)
andreglud said:
^This is all I'm getting after installing the APK and flashing the Zip with TWRP afterwards. (Shamu, Chroma, 6.0, Stock kernel)
Click to expand...
Click to collapse
Did you actually activate some modules? If yes, then please post a full logcat, taken as soon as possible after booting. Issues like this might occur if SELinux blocks access to the file. Maybe it doesn't appear on my Nexus 9 because I have installed SuperSU 2.52, including the modified boot image.

Disabling specific modules while in safe mode

Is there any way to do this? The checkboxes to enable/disable them are grayed out in Xposed Installer, and trying to change it via enabled_modules.xml doesn't work.
kayaven said:
Is there any way to do this? The checkboxes to enable/disable them are grayed out in Xposed Installer, and trying to change it via enabled_modules.xml doesn't work.
Click to expand...
Click to collapse
With only those vague information, nobody might help you. What Android version are you using? What device? Which version of Xposed have you installed?
Portgas D. Ace said:
With only those vague information, nobody might help you. What Android version are you using? What device? Which version of Xposed have you installed?
Click to expand...
Click to collapse
I have a Samsung Galaxy S5 running CM13, with Xposed version 78 installed.
kayaven said:
I have a Samsung Galaxy S5 running CM13, with Xposed version 78 installed.
Click to expand...
Click to collapse
According to your specifications, you will need to install the official version of Xposed by rovo89 from this thread. I would recommend to install the Xposed v80 version, since v81 and all other versions above introduced a new created API, so modules might crash.
Flash v80 (SDK23 for Android 6) and install the XposedInstaller_v3.0_alpha4.apk and report back.
Hmm, strange.
For some reason, when I removed safe mode, it booted up normally without any of the modules working (some module is causing bootloop, idk what one). I can now disable specific modules, without having to go to safemode.
Its a strange workaround, but it works.
Thank you for your help anyways.

XPOSED on Note 9?

Has anybody got XPOSED to work on their Exynos? Tried installing using Magisk. It says it's installed but not active. Any step by step tutorial? Thanks
AlfaM03 said:
Has anybody got XPOSED to work on their Exynos? Tried installing using Magisk. It says it's installed but not active. Any step by step tutorial? Thanks
Click to expand...
Click to collapse
there are 2 magisk modules a unified one v 90b3r14 and a per device one. if unified dosent work, use the perdevice sdk27 v90.2b3.
then be sure to use exposed installer 3.1.5 to manage exposed modules. also be sure magisk did not block any su requests.
bober10113 said:
there are 2 magisk modules a unified one v 90b3r14 and a per device one. if unified dosent work, use the perdevice sdk27 v90.2b3.
then be sure to use exposed installer 3.1.5 to manage exposed modules. also be sure magisk did not block any su requests.
Click to expand...
Click to collapse
Thanks. Has this worked for you?
AlfaM03 said:
Thanks. Has this worked for you?
Click to expand...
Click to collapse
It says
Xposed is not (yet) compatible with Android SDK version 27 or your processor architecture (arm64-v8a)
AlfaM03 said:
It says
Xposed is not (yet) compatible with Android SDK version 27 or your processor architecture (arm64-v8a)
Click to expand...
Click to collapse
really? what is saying that, xposed manager? if so again be sure that:
A- either of the 2 magisk modules i spoke of are enabled in magisk modules
B- you are using xposed manager 3.1.5
because its working fine o my side with either magisk modules and using v 3.1.5 of exposed manager.
AlfaM03 said:
Has anybody got XPOSED to work on their Exynos? Tried installing using Magisk. It says it's installed but not active. Any step by step tutorial? Thanks
Click to expand...
Click to collapse
Working for me with no issues
Install the xposed installer app and then the module from within the app... View attachment 4648867
Sent from my SM-N960F using Tapatalk
no issues here
It's working with Dr. Ketan's ROM. But I'm not sure if it's reliable, I've got some small bugs when Xposed and/or its modules is/are enabled.
Hi,
Does it work with Pie???
Thanks a lot
---------- Post added at 02:37 PM ---------- Previous post was at 02:36 PM ----------
Hi,
Does it work with Pie??
Thanks a lot
I can't uninstall Xpposed. Pls help me. My phone is Samsung Galaxy Note 9 with Oreo 8.1.0. I try uninstaller xposed-uninstaller-20180117-arm64.zip but no work.
How uninstall?

Categories

Resources