Database Develop

[Q] Flashing ATT Kitkat firmware over Rogers device?

Can anyone see any issues with flashing an ATT kitkat variant atop a Rogers device?
Thanks in advance!

Yes I can see an issue: You're having a rogers device. Never flash anything on your phone that isnt specifically made for it.
You can usually flash a custom rom no matter which carrier you have. But never use roms that are made for different devices/carriers.
Sent from my EndeavorU using XDA Premium 4 mobile app

I am using T-Mobile kitkat on my Rogers motox with unlocked bootloader. I don't have any issue so far, but keep in mind, you must understand the risk of flashing other carrier rom
Sent from my XT1053 using XDA Premium 4 mobile app

Unlock the boot loader and flash the AT&T 4.4 rom, it will work just fine. It is possible you could lose band 7(2600mhz) LTE as it may not be enabled in the AT&T firmware. You can easily go back to Rogers firmware if you decide it isn't for you.
I'm using the AT&T 4.4 on a Rogers Moto X, using it with Koodo, works great!

Thanks a lot guys! I'll give it a shot.

at&t kitkat 4 on rogers works!
differense said:
Thanks a lot guys! I'll give it a shot.
Click to expand...
Click to collapse
Same here flash the 4.4 kitkat on my rogers version of moto x using koodo and rogers sim card. both works with no issue. Of course once the rogers version comes out I will flash back again.

Want to clear the air and my curiosity, has anyone with a Rogers 1058 with a unlocked bootloader, rsdlite to TMO kitkat?
Sent on my Moto X

flashallthetime said:
Want to clear the air and my curiosity, has anyone with a Rogers 1058 with a unlocked bootloader, rsdlite to TMO kitkat?
Sent on my Moto X
Click to expand...
Click to collapse
Yes, it works just fine. I have it running on my spare Moto X.
No provider name in the upper left. If you flash the entire bundle it will most likely disable band 7 LTE, I have no way to verify that right now though. For some reason I find the AT&T 4.4 works better and gives better battery life. It could just be my imagination though, or it may be because the modem file matches the hardware perfectly.

Steve-x said:
Yes, it works just fine. I have it running on my spare Moto X.
No provider name in the upper left. If you flash the entire bundle it will most likely disable band 7 LTE, I have no way to verify that right now though. For some reason I find the AT&T 4.4 works better and gives better battery life. It could just be my imagination though, or it may be because the modem file matches the hardware perfectly.
Click to expand...
Click to collapse
OK so you rsdlite the tmo retail version? I would rather not use the AT&T leak. I did flash a tmo flashable ROM and did receive LTE
Sent on my Moto X

flashallthetime said:
OK so you rsdlite the tmo retail version? I would rather not use the AT&T leak. I did flash a tmo flashable ROM and did receive LTE
Sent on my Moto X
Click to expand...
Click to collapse
Yes, I've done the full flash using the retail file with rsdlite. You will get LTE with that firmware, but it may only work on the AWS band. You would need to do some testing to see if it used Band 7 LTE (2600 mhz). I don't have a Rogers account so I can't check. I know the original 4.4 leak from AT&T had 2600 mhz disabled, so I figure other versions may as well.

Steve-x said:
Yes, I've done the full flash using the retail file with rsdlite. You will get LTE with that firmware, but it may only work on the AWS band. You would need to do some testing to see if it used Band 7 LTE (2600 mhz). I don't have a Rogers account so I can't check. I know the original 4.4 leak from AT&T had 2600 mhz disabled, so I figure other versions may as well.
Click to expand...
Click to collapse
Thanks, going to see if I can use the AT&T modem instead
Sent on my Moto X

flashallthetime said:
Thanks, going to see if I can use the AT&T modem instead
Edit : worked like a charm, not using the at&t modem
Sent on my Moto X
Click to expand...
Click to collapse
Sent on my Moto X

Are there any specific instructions available for using rsdlite to flash kitkat on a rogers device? Tia
Sent from my XT1058 using XDA Premium 4 mobile app

differense said:
Are there any specific instructions available for using rsdlite to flash kitkat on a rogers device? Tia
Sent from my XT1058 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Unlock your bootloader and then follow the instructions here:
http://forum.xda-developers.com/showthread.php?t=2446515
You can use the dev edition/retail/tmobile edition firmware or even the AT&T 4.4 firmware. I recommend the dev edition though, no branding or bloatware at all.
I am using the dev edition firmware on my Rogers XT1058, using it with Koodo.

differense said:
Are there any specific instructions available for using rsdlite to flash kitkat on a rogers device? Tia
Sent from my XT1058 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
No specific instructions but you must have a unlocked boot loader. Here's a good thread in how to use rsdlite http://forum.xda-developers.com/showthread.php?t=2446515 . You can use either the at&t or T-Mobile sbf firmware, the at&t firmware has more bloat than the T-Mobile version
Sent on my Moto X

Has anyone confirmed that flashing a Rogers phone with XT1060 (retail/dev/tmo) doesn't screw up the radio?
Sent from my Moto X

Thanks for everyones help thus far. I was able to flash the Dev edition without issue.
However now I'm getting a force close on my security settings. Any thoughts?
Sent from my XT1053 using XDA Premium 4 mobile app

differense said:
Thanks for everyones help thus far. I was able to flash the Dev edition without issue.
However now I'm getting a force close on my security settings. Any thoughts?
Sent from my XT1053 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
You need to flash the modem
Sent on my Moto X

flashallthetime said:
You need to flash the modem
Sent on my Moto X
Click to expand...
Click to collapse
You're referring to the Rogers modem?

differense said:
You're referring to the Rogers modem?
Click to expand...
Click to collapse
No the at&t modem, did you use the at&t sbf firmware or did you just flash the ROM?
Sent on my Moto X

Xt1096 cm no sim

After installing cyanogenmod right after unlocking I get no sim message. Others are running cm no problem with their Verizon moto x. So idk what's wrong. Tried both the latest nightlies 8/16 8/19 same issue. It's no work. Came from mofo 5.1 so 5.0 BL
Any ideas?

The nightlies have issues, which is why they're nightlies, for me the wifi for the nightlies doesn't work. I had to install the Snapshot first, and do a data wipe.

tacosrdelicioso said:
After installing cyanogenmod right after unlocking I get no sim message. Others are running cm no problem with their Verizon moto x. So idk what's wrong. Tried both the latest nightlies 8/16 8/19 same issue. It's no work. Came from mofo 5.1 so 5.0 BL
Any ideas?
Click to expand...
Click to collapse
I use Nexus Experience and is working flawless, you should give a try.

juliospinoza said:
I use Nexus Experience and is working flawless, you should give a try.
Click to expand...
Click to collapse
I have the same issue and I tried the Nexus experience and it has the same issue

Im thinking that the verizon model is incompatible with moto x pure edition roms because they all run on gsm while verizon is cdma. juliospinoza, do you have the verizon moto x?
Sent from my XT1096 using Tapatalk

Aroch925 said:
I have the same issue and I tried the Nexus experience and it has the same issue
Click to expand...
Click to collapse
AiahKnead said:
Im thinking that the verizon model is incompatible with moto x pure edition roms because they all run on gsm while verizon is cdma. juliospinoza, do you have the verizon moto x?
Sent from my XT1096 using Tapatalk
Click to expand...
Click to collapse
nop, my bad.
the problem is CDMA vs GSM, you can definitely install CDMA roms over a GSM, but you cannot install GSM over CDMA. I have a XT1097 on Nextel/AT&T Mexico

ugh, i weep and pray for the day that verizon abandons cdma.
Sent from my XT1096 using Tapatalk

juliospinoza said:
nop, my bad.
the problem is CDMA vs GSM, you can definitely install CDMA roms over a GSM, but you cannot install GSM over CDMA. I have a XT1097 on Nextel/AT&T Mexico
Click to expand...
Click to collapse
There have been some people that have CM working on there xt1096s but others that don't

Most likely the people that have it working are using a verizon GSM chip. Just a guess though.
Sent from my XT1095 using Tapatalk

You may have to flash the verizon moto x radio and modem for 5.1 from mikeoswego's xt1096 thread and try clean flashing cm again
Sent from my XT1096 using Tapatalk

In addition to the above, you could try this http://buzzmobile.us/verizon-apn-settings-verizon-mms-settings-android-phones/. im currently not in a place where i can install roms so once i am able to, i will install nexus experience and try to get the network to work(although from a lot of these other comments, it doesnt seem likely to work) and give more feedback.
Sent from my XT1096 using Tapatalk
---------- Post added at 09:39 PM ---------- Previous post was at 09:32 PM ----------
AGISCI said:
Most likely the people that have it working are using a verizon GSM chip. Just a guess though.
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
im fairly sure that verizon only offers cdma
Sent from my XT1096 using Tapatalk

juliospinoza said:
nop, my bad.
the problem is CDMA vs GSM, you can definitely install CDMA roms over a GSM, but you cannot install GSM over CDMA. I have a XT1097 on Nextel/AT&T Mexico
Click to expand...
Click to collapse
AiahKnead said:
You may have to flash the verizon moto x radio and modem for 5.1 from mikeoswego's xt1096 thread and try clean flashing cm again
Sent from my XT1096 using Tapatalk
Click to expand...
Click to collapse
Yes I did install CM over the mofo 5.1. I tried flashing the 5.1 modem from mikeoswego's thread and that didn't work. I tried flashing a modem that was shared through the 5.1 CM 12.1 official thread and that didn't work as well. I tried updating TWRP to see if that would do anything but it didn't change anything. The result is still the same. I tried backing up the EFS in TWRP and then restoring that EFS backup when I had CM installed and that didn't work either. I've done a lot of googling and have come up with nothing else

did you try the apn thing i just suggested cause i heard you have to manually add the verizon apn
Sent from my XT1096 using Tapatalk

I just tried that. It wouldn't even let me save the apn I made and it said that apns weren't available for this user
Sent from my XT1096 using XDA Free mobile app

AiahKnead said:
In addition to the above, you could try this http://buzzmobile.us/verizon-apn-settings-verizon-mms-settings-android-phones/. im currently not in a place where i can install roms so once i am able to, i will install nexus experience and try to get the network to work(although from a lot of these other comments, it doesnt seem likely to work) and give more feedback.
Sent from my XT1096 using Tapatalk
---------- Post added at 09:39 PM ---------- Previous post was at 09:32 PM ----------
im fairly sure that verizon only offers cdma
Sent from my XT1096 using Tapatalk
Click to expand...
Click to collapse
I am fairly sure that verizon has sim chips too:
http://www.verizonwireless.com/support/4g-sim-card-faqs/
And i had one of their 3g gsm sim chips in my droid 2 that I bought in 2010...
Sent from my XT1095 using Tapatalk

AGISCI said:
I am fairly sure that verizon has sim chips too:
http://www.verizonwireless.com/support/4g-sim-card-faqs/
And i had one of their 3g gsm sim chips in my droid 2 that I bought in 2010...
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
Oh yeah, my moto x has a sim card too but I'm pretty sure the phone still uses cdma from what i see in network carrier settings. I got the phone from verizon so i think all verizon moto x 2014 have 4g lte sim cards.

CDMA is default, but when CDMA does not work I think it falls back to GSM right?
Sent from my XT1095 using Tapatalk

AGISCI said:
CDMA is default, but when CDMA does not work I think it falls back to GSM right?
Click to expand...
Click to collapse
No, Verizon does not use GSM at all (aside from whatever similarities there are between their LTE data and other vendors GSM type services.) When using voice, it will either be CDMA or VoLTE (on a capable device.)
This is a legacy issue due to their past acquisitions of so many old time analog networks that were then upgraded to CDMA back when that was the latest and greatest.

mikeoswego said:
No, Verizon does not use GSM at all (aside from whatever similarities there are between their LTE data and other vendors GSM type services.) When using voice, it will either be CDMA or VoLTE (on a capable device.)
This is a legacy issue due to their past acquisitions of so many old time analog networks that were then upgraded to CDMA back when that was the latest and greatest.
Click to expand...
Click to collapse
If it's "legacy", then why do they have lte gsm chips?
Sent from my XT1095 using Tapatalk

AGISCI said:
If it's "legacy", then why do they have lte gsm chips?
Click to expand...
Click to collapse
Because their voice traffic (except in VoLTE areas on enabled phones) is on CDMA while their LTE data traffic is a gsm variant. They've basically tacked the LTE data network onto their existing CDMA network. So, yes there is a sim for the LTE data part of their service but that doesn't change that they are still primarily CDMA for voice.

[ROM][STOCK][LP 5.1]XT1095 flashable stock rom

I have created a stock rom of 5.1 lollipop that you can flash via custom recovery. The only modifications that I have made are to remove the motrola OTA service, that way there will be no bricks from people taking an OTA and it won't bother anyone about OTA update messages. The recovery flasher was removed to prevent it from overwriting the custom recovery.
I have uploaded a new version which has the stagefright patch(23.16.6). The old version is also still available as well.
Installation:
1) If you are coming from another rom, or a different version of android you must do a factory reset.
2) Install the zip file through TWRP/CWM/etc.
3) Enjoy.
Download 5.1 23.16.6
Download 5.1 23.16.3

AGISCI said:
I have created a stock rom of 5.1 lollipop that you can flash via custom recovery. The only modifications that I have made are to remove the motrola OTA service, that way there will be no bricks from people taking an OTA and it won't bother anyone about OTA update messages. The recovery flasher was removed to prevent it from overwriting the custom recovery.
Installation:
1) If you are coming from another rom, or a different version of android you must do a factory reset.
2) Install the zip file through TWRP/CWM/etc.
3) Enjoy.
Download
Click to expand...
Click to collapse
Just wanted to say awesome! Thanks and am running right now with absolutely no issues!!! Noticed it's funny little differences in the ROM, from the Brazilian version ex. Status bar, the H was huge in the Brazilian version, very small for the T-Mobile unlocked xt1095!

So I'm running rooted stock 5.0, I can just flash this and run with it?

Yes. Just remember that my rom only flashes the kernel and the systrm. Nothing else gets upgraded. So your modem, partions, and bootloader will still be the 5.0 ones.
Sent from my XT1095 using Tapatalk

Very thanks
Regards
Enviado desde mi victara usando Tapatalk 2

Will it work on 1092 ???
Sent from my XT1092 using XDA Free mobile app

rohithksaj said:
Will it work on 1092 ???
Sent from my XT1092 using XDA Free mobile app
Click to expand...
Click to collapse
Will work for xt1092, but I do believe there is a stock ROM 5.1 for the xt1092, might be a better fit?

rohithksaj said:
Will it work on 1092 ???
Sent from my XT1092 using XDA Free mobile app
Click to expand...
Click to collapse
It should work. It only flashes the kernel and system, so your radio stays the same which means you should have signal.
Sent from my XT1095 using Tapatalk

Optimusman said:
Will work for xt1092, but I do believe there is a stock ROM 5.1 for the xt1092, might be a better fit?
Click to expand...
Click to collapse
Am sorry I see only stock for xt1097....not for 1092...
Sent from my XT1092 using XDA Free mobile app

There is one for 1092, but it's the retde not the reteu.
Sent from my XT1095 using Tapatalk

AGISCI said:
There is one for 1092, but it's the retde not the reteu.
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
I see I just knew it was for the xt1092 Cuz I was using it before the stock 5.1 ROM xt1095 was created, and it worked great! What's the difference between retde, and reteu? The country being used in?

Optimusman said:
I see I just knew it was for the xt1092 Cuz I was using it before the stock 5.1 ROM xt1095 was created, and it worked great! What's the difference between retde, and reteu? The country being used in?
Click to expand...
Click to collapse
The languages you can use. Not everyone speaks English.
retde should have German and Danish I believe.
Sent from my XT1095 using Tapatalk

AGISCI said:
The languages you can use. Not everyone speaks English.
retde should have German and Danish I believe.
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
I love when people are happy to teach and explain things! Appreciated!!!

I'm coming from an5.1.1 AOSP rom. I did a factory reset then installed the zip. Everyone installed perfectly but when I try to set up my device it says that this device has been reset and I need to verify my Google account. Once I do this it has me accept the Motorola terms and then it asks me to verify my Google account again. I cannot advance from this step. Any thoughts?

TopazUser1 said:
I'm coming from an5.1.1 AOSP rom. I did a factory reset then installed the zip. Everyone installed perfectly but when I try to set up my device it says that this device has been reset and I need to verify my Google account. Once I do this it has me accept the Motorola terms and then it asks me to verify my Google account again. I cannot advance from this step. Any thoughts?
Click to expand...
Click to collapse
Why can't you advance past it? Is there some error?
Sent from my XT1095 using Tapatalk

I'm not sure. I think it's a 5.1 security feature.

Yes it is a 5.1 security feature. Is there an error, does it freeze, does it say or do anything? Or you don't know the password, or it is someone else's account?
I need more info to know what is wrong.
Sent from my XT1095 using Tapatalk

Does this have the giant H and 4G icons?

No, this has the LTE icon instead of the big 4G one.
Sent from my XT1095 using Tapatalk

Yay !!! Ive been waiting for something like this
Will download as backup right away
Enviado desde mi XT1095 mediante Tapatalk

Marshmallow on xt1093

Will works CDMA on xt1093 after the flash marshmallow? Аre there ways to deal with it?

Sekasniy said:
Will works CDMA on xt1093 after the flash marshmallow? Аre there ways to deal with it?
Click to expand...
Click to collapse
You can convert your xt1093 to xt1097 , many post, here on xda, all works fine

Sekasniy said:
Will works CDMA on xt1093 after the flash marshmallow? Аre there ways to deal with it?
Click to expand...
Click to collapse
You could flash CM 13. But it is impossible to use stock marshmallow on the xt1093 with cdma.
cyker31 said:
You can convert your xt1093 to xt1097 , many post, here on xda, all works fine
Click to expand...
Click to collapse
No, it won't work. The xt1093 is cdma but the xt1097 is gsm. He won't have signal if he converts.
Sent from my XT1095 using Tapatalk

Recovery and Roms for XT1096 Verizon

Ok so now that some people have unlocked the bootloaders im sure people have questions like which roms are safe and what recovery can we use that are safe for our beloved device , so can anyone direct me on where to go?

I installed twrp on my phone and flashed stock 6.0 xt1095 firmware (I don't need cdma, only gsm matters to me so I don't care).
Stock 6.0 is really smoother, faster and I believe that battery life is better either because of doze.
You can also flash cm 13 but it's not that stable right now.

Is CM 12.1 safe on the XT1096?
Sent from my XT1096 using Tapatalk

RamAir02 said:
Is CM 12.1 safe on the XT1096?
Sent from my XT1096 using Tapatalk
Click to expand...
Click to collapse
Yes, and currently more stable than CM13.
Sent from my XT1095 using Tapatalk

Currently on Nexus Experience 6.0.1, data seems to be broken tho

CyanPop has been running awesome on my phone, with the exception of the video recorder working. It's a very customizable and refined rom.
http://forum.xda-developers.com/moto-x-2014/development/rom-cyanpop-v4-5-t3277786

RamAir02 said:
Is CM 12.1 safe on the XT1096?
Sent from my XT1096 using Tapatalk
Click to expand...
Click to collapse
+1 on 12.1. Running super stable and very awesome.

dubluv17 said:
CyanPop has been running awesome on my phone, with the exception of the video recorder working. It's a very customizable and refined rom.
http://forum.xda-developers.com/moto-x-2014/development/rom-cyanpop-v4-5-t3277786
Click to expand...
Click to collapse
Does data work?

CM13 nightly works just fine on my XT1096 (Google Fi Data SIM)

Running CM13 Nightly Builds on my xt1096 and data is working fine though it does says my signal is T-CDMA 64 instead of verizon.

Just be extra sure, when you say CM 12.1 or 13 is safe with the XT1096 you mean it's compatible with Verizon's CDMA network?

Everything is fine here , just had to change a few apn settings I have a straight talk sim inserted

Xavier102296 said:
Does data work?
Click to expand...
Click to collapse
Yep.

Im using the xt1095 flashable stock rom.
Its really great!
Sent from xt1096 with Marshmallow!

josuearisty said:
Im using the xt1095 flashable stock rom.
Its really great!
Sent from xt1096 with Marshmallow!
Click to expand...
Click to collapse
thats a gsm rom how did you do it please...

I'm having trouble finding stuff specific to XT1096 and have a few questions if anyone is able to answer:
Is it now possible to root stock 5.1 updated via OTA?
Do all victara roms work on this variant?
Is there a stock rooted 6.0 rom available so soon?
Is there a link to recoveries?

hutchjim said:
thats a gsm rom how did you do it please...
Click to expand...
Click to collapse
He is not using verizon service he is using a gsm company.
Sent from my XT1095 using Tapatalk

AGISCI said:
He is not using verizon service he is using a gsm company.
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
ok thanks a bunch

AGISCI said:
He is not using verizon service he is using a gsm company.
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
Yes, Im using a GSM network!
I think you will have to flash some other 3rd party rom
hutchjim said:
ok thanks a bunch
Click to expand...
Click to collapse
Sent from xt1096 with Marshmallow!

i flash my 1096 with the brazil marshmellow with the verizon 5.1 modem but the network wont stick to ltegsmcdma network it will for a minute then goes back to ltegsm i dont know why im trying other thingds but i havent got it yet,..if i could find a sprint marshmellow firmware i bet i could get that to work maybe i dont know;;;