Database Develop

Help need. Internal memory not respond

the case in detail's :
i flashed bad kernel on my device previously and now when iam trying to flash another kernel even use ODIN or CWM everything going well and completed but when check i found the old kernel still. i tried many times with same results and no error .
- system can read/write/mount the internal memory but the new pasted files deleted after restart. external card behave normal and i can preform flash using files pasted on it but without result any change.
- in CWM wipe/format/flash operations running well but no effect on device even restarted to CWM only.
- device has yellow triangle. is it effected?
- the devil kernel stacked in machine is 2.6.35.7-gb4846d2 [email protected] #2 and the build no. is jpkj4
system running normal but cannot keep any changes i do if restarted.
-system rooted and no problem with root
-can access adb
- ODIN behave same CWM, operation work but no change.
can anyone help me guys?
i did repartition the memory useing PIT for note butno change also
thank you all in advance

anyone may share an idea?

Try wipeing everything in cwm including all formats in mounts and storage and then flash a stock rom try kk9 with Odin then re root with kk9 root then if on gb use a jig to remove triangle or if going on ics try using triangle away from chainfire

brockyneo said:
Try wipeing everything in cwm including all formats in mounts and storage and then flash a stock rom try kk9 with Odin then re root with kk9 root then if on gb use a jig to remove triangle or if going on ics try using triangle away from chainfire
Click to expand...
Click to collapse
thank you for sharing
i tried this steps using N7000OJPLA1 without success, what the spicial in KK9?
do you aware about tool stronger than Odin please? i used to flash with PIT file but odin couldn't call the memory to re-partition it.
do you think the counter if counted (1) and the triangle if appeared could prevent the system from even saving and keeping the settings which you may do? such WiFi On if make it off and restart its going back on, the rom in device now is stock rom GB.

jamaljmys said:
thank you for sharing
i tried this steps using N7000OJPLA1 without success, what the spicial in KK9?
do you aware about tool stronger than Odin please? i used to flash with PIT file but odin couldn't call the memory to re-partition it.
do you think the counter if counted (1) and the triangle if appeared could prevent the system from even saving and keeping the settings which you may do? such WiFi On if make it off and restart its going back on, the rom in device now is stock rom GB.
Click to expand...
Click to collapse
The counter and yellow triangle need to be removed for warrenty purpose if you need to send the phone back and Odin normally is the saviour of most problems NEVER flash with Odin and mark the repartition as that alone can brick your device and I use kk9 cause it can directly be rooted easily and the counter and triangle have nothing to do with your setting
Also try a rom in Odin with a pit file to see if that helps

brockyneo said:
The counter and yellow triangle need to be removed for warrenty purpose if you need to send the phone back and Odin normally is the saviour of most problems NEVER flash with Odin and mark the repartition as that alone can brick your device and I use kk9 cause it can directly be rooted easily and the counter and triangle have nothing to do with your setting
Also try a rom in Odin with a pit file to see if that helps
Click to expand...
Click to collapse
thank you brother
could you recommend me a PIT file working with direct root abel rom such kk9 and its tested ?

jamaljmys said:
thank you brother
could you recommend me a PIT file working with direct root abel rom such kk9 and its tested ?
Click to expand...
Click to collapse
Give me one min mate I'll go on PC its a pain trying on phone lol
---------- Post added at 07:54 PM ---------- Previous post was at 07:49 PM ----------
here you go mate try this
Get Heimdall, put your note in download mode. Go to the utility page, under "download as a file" click "save as", in the dialog put "galaxynote.pit". This will download the pit from the phone. Now you can untar the odin package (which might contain a pit too, in this case, you'd want to use that one), go to the flash tab of heimdall and select the pit you made (or got from the odin package, if it came with one), and add partitions and add the files from the odin tarball you extracted.
let me know how it goes

brockyneo said:
Give me one min mate I'll go on PC its a pain trying on phone lol
Click to expand...
Click to collapse
take your time bro. thank you
i think my device problem like that, the new kernel effected the internal memory by bad script which prevent the memory to deal with any operation, since the kernel in the same block with boot loader, so every time device boot load the kernel so run that bad script.
- anyway to remove the kernel files manually?
- how to stop kernel in boot at least so could do something through CWM or Odin.?

jamaljmys said:
take your time bro. thank you
i think my device problem like that, the new kernel effected the internal memory by bad script which prevent the memory to deal with any operation, since the kernel in the same block with boot loader, so every time device boot load the kernel so run that bad script.
- anyway to remove the kernel files manually?
- how to stop kernel in boot at least so could do something through CWM or Odin.?
Click to expand...
Click to collapse
try whats in the post above and if no good try cleaning the kernal files using this
http://forum.xda-developers.com/showthread.php?t=1473622
but above post should help

brockyneo said:
Give me one min mate I'll go on PC its a pain trying on phone lol
---------- Post added at 07:54 PM ---------- Previous post was at 07:49 PM ----------
here you go mate try this
Get Heimdall, put your note in download mode. Go to the utility page, under "download as a file" click "save as", in the dialog put "galaxynote.pit". This will download the pit from the phone. Now you can untar the odin package (which might contain a pit too, in this case, you'd want to use that one), go to the flash tab of heimdall and select the pit you made (or got from the odin package, if it came with one), and add partitions and add the files from the odin tarball you extracted.
let me know how it goes
Click to expand...
Click to collapse
mate
iam doing the heimdall way now
- i got the pit from device and i uploaded in flash tap
- i extracted the TAR firl and got the files:
boot.bin
cache.img
factoryfs.img
hidden.img
modem.bin
param.lfs
Sbl.bin
zImage
do i add them in same flash tab by select each one and press add ? or in package tab. really hiemdall improved much since last time i used in my GT P1000
i added in this sequense:
the partition not found i extracted file i selected to him FactoryFs file, others matched name with partition name and file in extracted.
exept one partition name UMS couldnot mach with any file.
could help by more details ?
thank you mate

jamaljmys said:
mate
iam doing the heimdall way now
- i got the pit from device and i uploaded in flash tap
- i extracted the TAR firl and got the files:
boot.bin
cache.img
factoryfs.img
hidden.img
modem.bin
param.lfs
Sbl.bin
zImage
do i add them in same flash tab by select each one and press add ? or in package tab. really hiemdall improved much since last time i used in my GT P1000
thank you mate
Click to expand...
Click to collapse
Just press add in same flash tab and should be good to go mate

brockyneo said:
Just press add in same flash tab and should be good to go mate
Click to expand...
Click to collapse
i added in this sequense:
the partition not found i extracted file i selected to him FactoryFs file, others matched name with partition name and file in extracted.
exept one partition name UMS couldnot mach with any file.
could help by more details ?
thank you mate

jamaljmys said:
i added in this sequense:
the partition not found i extracted file i selected to him FactoryFs file, others matched name with partition name and file in extracted.
exept one partition name UMS couldnot mach with any file.
could help by more details ?
thank you mate
Click to expand...
Click to collapse
Can you not flash without the ums its been a long time since I've used it I'll have a look now for ya

Uploading PIT
PIT upload successful
Uploading GANG
0%
1%
2%
3%
4%
5%
6%
7%
8%
9%
10%
11%
12%
13%
ERROR: Failed to confirm end of file transfer sequence!
GANG upload failed!
Ending session...
Rebooting device...
Heimdall Crashed!...
what is F**** that?

jamaljmys said:
Uploading PIT
PIT upload successful
Uploading GANG
0%
1%
2%
3%
4%
5%
6%
7%
8%
9%
10%
11%
12%
13%
ERROR: Failed to confirm end of file transfer sequence!
GANG upload failed!
Ending session...
Rebooting device...
Heimdall Crashed!...
what is F**** that?
Click to expand...
Click to collapse
Mmm that's odd I'll find the files needed for Odin flash
---------- Post added at 09:53 PM ---------- Previous post was at 09:47 PM ----------
are you selecting the 16gb pit well thats if your note is 16gb
---------- Post added at 09:56 PM ---------- Previous post was at 09:53 PM ----------
also may i ask what bad kernel did you flash
also can you boot into cwm and try formatting everything in mounts and storage and then flash stock rom via odin

brockyneo said:
Mmm that's odd I'll find the files needed for Odin flash
---------- Post added at 09:53 PM ---------- Previous post was at 09:47 PM ----------
are you selecting the 16gb pit well thats if your note is 16gb
---------- Post added at 09:56 PM ---------- Previous post was at 09:53 PM ----------
also may i ask what bad kernel did you flash
also can you boot into cwm and try formatting everything in mounts and storage and then flash stock rom via odin
Click to expand...
Click to collapse
-the partition UMS is"USB Mass Storage" and its not added so crash expected bro.
- i selected the 16GB yes i downloaded the PIT from device and used it
-its 2.6.35.7-gb4846d2 [email protected] #2
- i can do everything normal and get completed after any operation in CWM and Odin but when reboot the device its return for the point before, i mean nothing change. i mean also ( if wipe/format the CWM said Done but when reboot found nothing wiped or formatted)
(when flash by CWM or Odin kernel/rom any zip file its said completed but when reboot the device nothing changed even rom or kernel)
don't fed-up please, its same devil inside device.
need the tar file which included the partition name UMS now.
thank you

jamaljmys said:
-the partition UMS is"USB Mass Storage" and its not added so crash expected bro.
- i selected the 16GB yes i downloaded the PIT from device and used it
-its 2.6.35.7-gb4846d2 [email protected] #2
- i can do everything normal and get completed after any operation in CWM and Odin but when reboot the device its return for the point before, i mean nothing change. i mean also ( if wipe/format the CWM said Done but when reboot found nothing wiped or formatted)
(when flash by CWM or Odin kernel/rom any zip file its said completed but when reboot the device nothing changed even rom or kernel)
don't fed-up please, its same devil inside device.
need the tar file which included the partition name UMS now.
thank you
Click to expand...
Click to collapse
I didn't realise net chip released a kernel for the note and you was on gb right?
Right I'll have look for the ums file but should be able to extract it from heimdall

brockyneo said:
I didn't realise net chip released a kernel for the note and you was on gb right?
Right I'll have look for the ums file but should be able to extract it from heimdall
Click to expand...
Click to collapse
i think its wrong kernel yes.
iam downloading now XXLA1 wipe version and i will look inside the zip file. i guess its included.
thanks

jamaljmys said:
i think its wrong kernel yes.
iam downloading now XXLA1 wipe version and i will look inside the zip file. i guess its included.
thanks
Click to expand...
Click to collapse
OK mate let me know how it goes its bit of a pain for me to properly help as I'm not at comp at the moment sorry

brockyneo said:
OK mate let me know how it goes its bit of a pain for me to properly help as I'm not at comp at the moment sorry
Click to expand...
Click to collapse
i got the ums file and tried againg, got same Hiemdall error after 12% .
what is that? really devil?

[Q]:( "Firmware upgrade encountered an issue"

So yesterday i tryed to flash pre rooted rom onto my s3 9305 lte/4g, All worked fine until on sboot, Odin failed. I didnt really know what to do so i disconnected my phone from pc and tried to restart it. So Now my phone wont start, it just goes to screen that shows "Firmware upgrade encountered an issue. Please select recovery mode in kies & try again"
I tryed to look up this issue but i didnt find any good tutorials, Atleast for this phone.
I cannot boot into recovery, But i can into Download more, And what i understanded its not all lost then
some info:
Download mode:
Odin mode
Product Name GT-i9305
Custom binary download Yes (3 counts)
Current binary Samsung official
System status Custom
Knox warranty void 1
RP SWREV A2

Install a stock firmware that is for your region...

Raistlin1158 said:
Install a stock firmware that is for your region...
Click to expand...
Click to collapse
I have the same issue.
ODIN MODE
PRODUCT NAME: GT-I9305
CUSTOM BINARY DOWNLOAD: No
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
KNOX WARRANTY VOID: 0
RP SWREV: A2

risinhux said:
I have the same issue.
ODIN MODE
PRODUCT NAME: GT-I9305
CUSTOM BINARY DOWNLOAD: No
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
KNOX WARRANTY VOID: 0
RP SWREV: A2
Click to expand...
Click to collapse
Same answer .

JJEgan said:
Same answer .
Click to expand...
Click to collapse
But I can't install anything :crying:

Pandastyl said:
So yesterday i tryed to flash pre rooted rom onto my s3 9305 lte/4g, All worked fine until on sboot, Odin failed. I didnt really know what to do so i disconnected my phone from pc and tried to restart it. So Now my phone wont start, it just goes to screen that shows "Firmware upgrade encountered an issue. Please select recovery mode in kies & try again"
I tryed to look up this issue but i didnt find any good tutorials, Atleast for this phone.
I cannot boot into recovery, But i can into Download more, And what i understanded its not all lost then
some info:
Download mode:
Odin mode
Product Name GT-i9305
Custom binary download Yes (3 counts)
Current binary Samsung official
System status Custom
Knox warranty void 1
RP SWREV A2
Click to expand...
Click to collapse
Either download Samsung KIES to your PC and install it (Samsung Kies 3 if you were using 4.3)
Then plug your phone to your PC
Either wait for KIES to do the emergency firmware recovery for you or find the emergency firmware recovery option and click it by yourself
Then you'll have a stock firmware
The warranty flag should be still there even you have new stock and official firmware
Second method:
Flash your firmware via Odin
You said you could enter Download mode
So flash it via Odin
Use CF-Auto Root if you want to root your phone when you fixed it
Good luck!

[Q&A] [GUIDE][HOWTO] ODIN to Stock Unrooted Firmware [NK4]

Q&A for [GUIDE][HOWTO] ODIN to Stock Unrooted Firmware [NK4]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [GUIDE][HOWTO] ODIN to Stock Unrooted Firmware [NK4]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

Can I use this method to unroot if I'm on NK4 rooted?

After I've followed every step, my phone still gets stuck in the same boot loop as always. It never loads to recovery mood after flashing the stock ROM using Odin v3.09.
I used the NK4 rom. Am I doing anything incorrectly? I've tried loads of different things to get past this boot loop.

re: rooting and recovery
whatishappening said:
After I've followed every step, my phone still gets stuck in the same boot loop as always. It never loads to recovery mood after flashing the stock ROM using Odin v3.09.
I used the NK4 rom. Am I doing anything incorrectly? I've tried loads of different things to get past this boot loop.
Click to expand...
Click to collapse
Here are the steps you need to do to root and install custom recovery:
1: Download and Odin flash cf-autoroot which can be found here:
https://www.dropbox.com/s/jokv7avj6pphjkq/CF-Auto-Root-trltetmo-trltetmo-smn910t.tar?dl=0
2: Download and Odin flash twrp custom recovery which can be found here:
https://dl.dropboxusercontent.com/u/45687485/openrecovery-twrp-2.8.1.1-trltetmo.tar
Once you have successfully odin flashed both the TAR files you should have root
and custom recovery too.
Good luck!
https://dl.dropboxusercontent.com/u/45687485/openrecovery-twrp-2.8.1.1-trltetmo.tar

Misterjunky said:
Here are the steps you need to do to root and install custom recovery:
1: Download and Odin flash cf-autoroot which can be found here:
link removed
2: Download and Odin flash twrp custom recovery which can be found here:
link removed
Once you have successfully odin flashed both the TAR files you should have root
and custom recovery too.
Good luck!
[/URL]
Click to expand...
Click to collapse
is it possible that my problem of being stuck in a boot loop and restarting is due to a fully drained battery?
I asked because my phone doesn't ever charge when plugged in, it instead immediately attempts to boot. Should I purchase a second battery and attempt to boot?
---------- Post added at 01:25 AM ---------- Previous post was at 01:18 AM ----------
I've attempted to flash that recovery image multiple times. It's an .img file. How am I supposed to attach it using ODIN PDA?

re: tar files
whatishappening said:
is it possible that my problem of being stuck in a boot loop and restarting is due to a fully drained battery?
I asked because my phone doesn't ever charge when plugged in, it instead immediately attempts to boot. Should I purchase a second battery and attempt to boot?
---------- Post added at 01:25 AM ---------- Previous post was at 01:18 AM ----------
I've attempted to flash that recovery image multiple times. It's an .img file. How am I supposed to attach it using ODIN PDA?
Click to expand...
Click to collapse
I don't know where you got the IMG file, but both of the links I posted
only contain TAR files which needs to be flashed in Odin's PDA slot.

My mistake was unzipping the recovery file when I should have not been doing that. I've done both of the things you suggested and now my phone auto boots with a battery icon and continuously boot loops, but instead of saying "Samsung Galaxy Note 4" for a second before boot looping, it shows the battery icon.
youtube.com/watch?v=Bj6Zssy3-ZQ&feature=youtu.be
I apologize for linking as a new member, but this is not spam and I had to modify the link to include a video demonstration of what I'm describing. Thank you.
---------- Post added at 02:02 AM ---------- Previous post was at 01:38 AM ----------
whatishappening said:
My mistake was unzipping the recovery file when I should have not been doing that. I've done both of the things you suggested and now my phone auto boots with a battery icon and continuously boot loops, but instead of saying "Samsung Galaxy Note 4" for a second before boot looping, it shows the battery icon.
youtube.com/watch?v=Bj6Zssy3-ZQ&feature=youtu.be
I apologize for linking as a new member, but this is not spam and I had to modify the link to include a video demonstration of what I'm describing. Thank you.
Click to expand...
Click to collapse
Just for fun, here is a video of what happens when I attempt to boot into recovery mode. Notice that I do not need to press the power button because my phone always attempts to auto-turn on when it is plugged in.
youtube.com/watch?v=zgbqQTuImcM&feature=youtu.be

My Note 4 is stuck in a boot loop after flashing. It gets to the T-Mobile logo, stays there for about 30 seconds and reboots. Any way around this?
Thanks in advance.

Foxhoundz said:
My Note 4 is stuck in a boot loop after flashing. It gets to the T-Mobile logo, stays there for about 30 seconds and reboots. Any way around this?
Thanks in advance.
Click to expand...
Click to collapse
Try redownloading the firmware and reflashing.
Sometimes downloads have hiccups.
Just used the exact same file and flashed today, worked fine as usual (usually flash stock about once a week).
Sent from my trltetmo using XDA Premium 4 mobile app

I was able to get it working.
For those facing the boot loops, simply go into the stock recovery mode during boot and clear your cache. That should fix any remaining issues.

Also, always make sure to factory reset before the first boot.

Perfect!
Perfect, flawless tutorial. Worked Great, ready for Lollipop OTA!

Baseband and Bootloader
For some reason I downloaded the baseband and bootloader for ANK4.
I Odin'd back to stock successfully and am wondering if I need to flash this too.

Still "custom" after unrooting
Unrooted my t-mobile note 4 using the guide, went to re-root using the same method I did before, chainfire/twrp, and get an error when hitting the start button in Odin. Every time. Even after unroot the device status still says custom. Could that be affecting re-root? Anyone else have this issue?
I've asked before in this thread:
http://forum.xda-developers.com/note-4-tmobile/help/root-unroot-kies-t3003971
Sorry for link but didn't want to copy/paste everything.

Have you tried a different version of Odin? I usually rock 3.0.4

Android_Monsters said:
Have you tried a different version of Odin? I usually rock 3.0.4
Click to expand...
Click to collapse
I've tried every version of Odin I can find... And multiple CF sources.

Razorfengraul said:
I've tried every version of Odin I can find... And multiple CF sources.
Click to expand...
Click to collapse
I've used this method multiple times to stock and re root, haven't had any problems.
Few things that may he the problem...
Are you using the factory cord that came with your device?
Are you putting your device in download mode?
Are you turning on debugging in the Developer Settings?
Do you have the correct drivers for your device?
Sent from my SM-N910T using XDA Premium 4 mobile app

devynbf said:
I've used this method multiple times to stock and re root, haven't had any problems.
Few things that may he the problem...
Are you using the factory cord that came with your device?
Are you putting your device in download mode?
Are you turning on debugging in the Developer Settings?
Do you have the correct drivers for your device?
Sent from my SM-N910T using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yes to everything other than the Samsung cable... Would that really make a difference?

Alright, as stated, I've followed this guide flawlessly... Factory reset before first boot, wiped cache, everything. Device status still showed "custom" and i was unable to download OTA updates due to custom binary. (mundane, i know, but proves my point)
So i went to re-root.
This is my command line in Odin upon flashing CF Auto Root:
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> cache.img.ext4
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
What am i missing... Every version of Odin out there and every available CF download i can find... Happens every time.

Razorfengraul said:
Yes to everything other than the Samsung cable... Would that really make a difference?
Click to expand...
Click to collapse
Yes, ODIN sometimes only works if you have the original Factory Cable.
I've run into MANY problems (like the one you're explaining) when not using the cord that came with it.
That's your problem. Use the factory cord.
Sent from my SM-N910T using XDA Premium 4 mobile app

recovery bootloop with N910T

Hello all developers
the problem start when my friend ask me to fix his mobile
the first look to the mobile is
when i click power on it's show Samsung logo with this word at the left top( recovery booting ... )then reboot after 2 seconds at-least
i have download the latest official Rom 5.1.1 from sammobile
N910TUVU2DOK2_N910TTMB2DOK2_N910TUVU2DOK2_HOME
after flash with odin i remember that is must complete the installation after first reboot with android logo but there is nothing happened !! its always reboot with the same word ( recovery rebooting )
I have tired to flash many Roms
Many BL
Many Modem
try to flash PIT File and the same
try Emergency with Kies and nothing changed
Kies give me this information when i put the model
PDA : OK2 / CSC : OK2 / PHONE : OK2 (TMB)
the all info about this mobile :
Model : SM-N910T
S/N : RF8FC131QYY 14.12
IMEI : 356095064430028
when i enter Odin Mode thats appear
ODIN MODE (HIGH SPEED)
PRODUCT NAME : SM-910t
CURRENT BINARY : SAMSUNG OFFICIAL
SYSTEM STATUS : CUSTOM
REACTIVATION LOCK : OFF
KNOX WARRANTY VOID : 0x1 (4)
QUALCOMM SECUREBOOT : ENABLE (CBS)
RP SWREV : S1, T1 , R1 , A2 , P1
SECURE DOWNLOAD : ENABLE
UDC START
please help me to fix it with any rom ... I can't go recovery mode but i can go download mode with ODIN

Any help please

i have the same issue but im on verizon. Also kies doesnt recognize my phone and I can't get to recovery. Any help would be appreciated. otherwise i just have an expensive paperweight.

Download n910t pit file and flash the pit file with the firmware. Make sure repartiton is checked. And let it reboot without pulling the the usb out.. the first thing it always does after odin to stock is reboot to recovery....are you getting any errors when you try to flash the firmware? Download this firmware. It is untouched full stock wipes everything
https://mega.nz/#!asRzgCYb!f8ssb_v6zDxYJ8_u1ygzpothj1arjRmMdM_opGz8QO0

Had the same issue i tried all kinds of roms stock and custom nothing seemed to work bought a new battery didnt make a diff now my phone is dead

noob4598 said:
Download n910t pit file and flash the pit file with the firmware. Make sure repartiton is checked. And let it reboot without pulling the the usb out.. the first thing it always does after odin to stock is reboot to recovery....are you getting any errors when you try to flash the firmware? Download this firmware. It is untouched full stock wipes everything
https://mega.nz/#!asRzgCYb!f8ssb_v6zDxYJ8_u1ygzpothj1arjRmMdM_opGz8QO0
Click to expand...
Click to collapse
Can you share PIT file for 910t? My phone is just keep bootcycle no matter what I do with ODIN, and try to flash ROM after ODIN, it bombs out, and boot cycle...
Thanks.

I am stuck with the same thing
any help would be great I am some what of a noob to this

Anyone had luck solving this problem?

noob4598 said:
Download n910t pit file and flash the pit file with the firmware. Make sure repartiton is checked. And let it reboot without pulling the the usb out.. the first thing it always does after odin to stock is reboot to recovery....are you getting any errors when you try to flash the firmware? Download this firmware. It is untouched full stock wipes everything
https://mega.nz/#!asRzgCYb!f8ssb_v6zDxYJ8_u1ygzpothj1arjRmMdM_opGz8QO0
Click to expand...
Click to collapse
Link plz

waleedy said:
Link plz
Click to expand...
Click to collapse
I'm having the same problem. I'm not getting any errors, and I found and flashed the PIT file with the stock firmware. Still no boot. It just sits on the boot up screen. No recovery, no battery icon...no nothing.

Soft Bricked - Odin Flash Read Failure / eMMC Write Fail etc

Attempting to restore my Note 4 to stock by flashing with Odin. Never installed a custom OS on this, I may have rooted it long ago but can't recall. Always been stock essentially.
using Odin v3.12
flashing
N910TUVU2EPJ2_N910TTMB2EPJ2_N910TUVU2EPJ2_HOME.tar.md5
also tried the version broken into 4 parts, in various orders & configurations.
this is what I get
Code:
ddi : mmc_read failed
ODIN MODE (HIGH SPEED)
PRODUCT NAME: SM-N910T
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
REACTIVATION LOCK: OFF
KNOX WARRANTY VOID: 0x0
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV: S1, T1, A1, A2, P1
SECURE DOWNNLOAD: ENABLE
UDC START
ODIN: flash read failure
ERROR: there is no pit binary
ODIN: flash read failure
trying the CSC FLASH:
Code:
ODIN: flash write failure
Trying AP w/ Nand Erase All:
Code:
ODIN: flash write failure
[1]eMMC write fail: ABOOT
This my hardware may be broke & need a warranty replacement. But just hoping to check here if anyone has any ideas I haven't tried. Thanks!

pchc_lx said:
Attempting to restore my Note 4 to stock by flashing with Odin. Never installed a custom OS on this, I may have rooted it long ago but can't recall. Always been stock essentially.
using Odin v3.12
flashing
N910TUVU2EPJ2_N910TTMB2EPJ2_N910TUVU2EPJ2_HOME.tar.md5
also tried the version broken into 4 parts, in various orders & configurations.
this is what I get
Code:
ddi : mmc_read failed
ODIN MODE (HIGH SPEED)
PRODUCT NAME: SM-N910T
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
REACTIVATION LOCK: OFF
KNOX WARRANTY VOID: 0x0
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV: S1, T1, A1, A2, P1
SECURE DOWNNLOAD: ENABLE
UDC START
ODIN: flash read failure
ERROR: there is no pit binary
ODIN: flash read failure
trying the CSC FLASH:
Code:
ODIN: flash write failure
Trying AP w/ Nand Erase All:
Code:
ODIN: flash write failure
[1]eMMC write fail: ABOOT
This my hardware may be broke & need a warranty replacement. But just hoping to check here if anyone has any ideas I haven't tried. Thanks!
Click to expand...
Click to collapse
Try odin 3.10 and re download firmware maybe file is broken.

Trex888 said:
Try odin 3.10 and re download firmware maybe file is broken.
Click to expand...
Click to collapse
Hey, thanks for the response. I tried this and actually got the first successful flash all day. However, on reboot I sat at the Samsung splash screen and didn't pass that. Further attempts to flash using the same setup are all FAILing again now, too. Bummer..

pchc_lx said:
Hey, thanks for the response. I tried this and actually got the first successful flash all day. However, on reboot I sat at the Samsung splash screen and didn't pass that. Further attempts to flash using the same setup are all FAILing again now, too. Bummer..
Click to expand...
Click to collapse
Try different usb cable i had same issue few days ago and i figure out it was usb cable that cause this.
After flash firmware Must do wipe data factory reset and wipe cache from stock recovery otherwise it will stuck in bootloop at splash screen.
Make sure you are flashing correct firmware for your model.
If this didn't work then flash twrp in odin and flash from twrp any rom for your model but it will trip knox and void your warranty.
Hope that helps

pchc_lx said:
Hey, thanks for the response. I tried this and actually got the first successful flash all day. However, on reboot I sat at the Samsung splash screen and didn't pass that. Further attempts to flash using the same setup are all FAILing again now, too. Bummer..
Click to expand...
Click to collapse
Try Odin 3.09 and uncheck reboot option,
when then download is finished "Pass" disconnect and pull the battery out and go to recovery mode,
wipe partition, wipe Data then restart, you will be fine.

masood8 said:
Try Odin 3.09 and uncheck reboot option,
when then download is finished "Pass" disconnect and pull the battery out and go to recovery mode,
wipe partition, wipe Data then restart, you will be fine.
Click to expand...
Click to collapse
Hey thanks for this. Odin 3.09 seems to PASS flash every time, which is awesome.
On booting into recovery, however I drop into the Android robot animated system update screen. No option to factory reset.
I briefly get 'Installing Update' with a progress bar
then it goes to Erasing... for some time.
Then "Installing system update..." with no progress bar.
Finally, reboots and hangs at the Samsung splash screen after the blue LED lights
This thing has been 100% stock but I might try to flash TWRP or idunno what else to try. Found out it'll be $150-$175 deductible to get a replacement so I definitely have an interest in saving this thing.
edit: actually after a couple more tries I got this thing to actually boot. dropped into fresh Samsung setup routine. success!!.... sort of. crashed mid-setup and rebooted. which was the behaviour I was attempting to address by resetting this thing in the first place. ehhhh wonder if I don't actually have a bad emmc/flash memory/chipset whatever. will keep trying.
edit2: random crashing all the time. finally made it all the way through setup to the home screen, but don't think this is gonna get better. i could try to re-flash, or flash a custom recovery or a custom rom or idk? basically back at square 1.

i'm having essentially the same issue as you are, I think it may be time to move on for myself. I would like to get it to boot so I can "jump" to a different phone because I have $98 left to pay on her and that plus 175 for a refurb probably burned screen hardware is a kick to the pants. I can get recovery to work both stock recovery and twrp but nothing I flash will stick to the system partition it seems.
back to trying a little more then google pixel here I come if she won't come back from the dead...

_kevn_ said:
i'm having essentially the same issue as you are, I think it may be time to move on for myself. I would like to get it to boot so I can "jump" to a different phone because I have $98 left to pay on her and that plus 175 for a refurb probably burned screen hardware is a kick to the pants. I can get recovery to work both stock recovery and twrp but nothing I flash will stick to the system partition it seems.
back to trying a little more then google pixel here I come if she won't come back from the dead...
Click to expand...
Click to collapse
this is a hardware problem in ****ing Samsung phones...