Hi guys!
After a try to update my XT1068 to Android 6.0, something gone wrong. Then, i tried to start all over again, but, at some point, during an installation (the image was the android robot with his stomach open...lol), he turned off.
Now, even with full battery, he doesnt start. Even the LED works. But when i plug it to my notebook, in the device manager, it appear as "qhsusb_bulk".
So, can I send it to the trash and buy a new one?
Or is there anyway to revive it?
Thank you guys and sorry for my shameful english!
Hugo_Xnaider said:
Hi guys!
After a try to update my XT1068 to Android 6.0, something gone wrong. Then, i tried to start all over again, but, at some point, during an installation (the image was the android robot with his stomach open...lol), he turned off.
Now, even with full battery, he doesnt start. Even the LED works. But when i plug it to my notebook, in the device manager, it appear as "qhsusb_bulk".
So, can I send it to the trash and buy a new one?
Or is there anyway to revive it?
Thank you guys and sorry for my shameful english!
Click to expand...
Click to collapse
There is no official 6.0 for the moto G 2014 yet. So i wonder how you installed it.
The android robot is because you don't have a custom recovery installed, you can install that and flash another rom or you can use the recovery tool to revert it to stock lollipop.
Hugo_Xnaider said:
Hi guys!
After a try to update my XT1068 to Android 6.0, something gone wrong. Then, i tried to start all over again, but, at some point, during an installation (the image was the android robot with his stomach open...lol), he turned off.
Now, even with full battery, he doesnt start. Even the LED works. But when i plug it to my notebook, in the device manager, it appear as "qhsusb_bulk".
So, can I send it to the trash and buy a new one?
Or is there anyway to revive it?
Thank you guys and sorry for my shameful english!
Click to expand...
Click to collapse
>qhsusb_bulk
Yes it is dead.
Try to for press power button for 60 seconds ( 60!)
Sent from my Moto G 2014 LTE using Tapatalk
Hugo_Xnaider said:
Hi guys!
After a try to update my XT1068 to Android 6.0, something gone wrong. Then, i tried to start all over again, but, at some point, during an installation (the image was the android robot with his stomach open...lol), he turned off.
Now, even with full battery, he doesnt start. Even the LED works. But when i plug it to my notebook, in the device manager, it appear as "qhsusb_bulk".
So, can I send it to the trash and buy a new one?
Or is there anyway to revive it?
Thank you guys and sorry for my shameful english!
Click to expand...
Click to collapse
i've got the same problem, we need a "blank flash" image to make it work again. I don't really know what it is but the thing i know is that we don't have it for the moment. It already exists for the Moto G 1st gen ^^
keep your phone don't send it to the trash and maybe with some luck we'll get this blank flash ^^
Miiick3y said:
i've got the same problem, we need a "blank flash" image to make it work again. I don't really know what it is but the thing i know is that we don't have it for the moment. It already exists for the Moto G 1st gen ^^
keep your phone don't send it to the trash and maybe with some luck we'll get this blank flash ^^
Click to expand...
Click to collapse
I've bought a Moto G 3 Turbo Edition...but will wait for this blank flash and, with some luck, sell the Moto G anyday :good:
luca020400 said:
Try to for press power button for 60 seconds ( 60!)
Sent from my Moto G 2014 LTE using Tapatalk
Click to expand...
Click to collapse
What will happen after the 60 sec on a non broken device?
doppelhelix said:
What will happen after the 60 sec on a non broken device?
Click to expand...
Click to collapse
Device will reboot
Sent from my Moto G 2014 LTE using Tapatalk
luca020400 said:
Device will reboot
Sent from my Moto G 2014 LTE using Tapatalk
Click to expand...
Click to collapse
Oh. Much excitement. Such astonishment. WOW
Related
I was rooting my phone I got to the point where I accepted the 4.4 update it downloaded installed shut off and that was it. I have tried every button combination, It had plenty of charge, and just to make sure I plugged it into a wall charger for 20 minutes. Any suggestions? The screen doesn't come on at all. Thanks, Garrett.
Follow the instructions on how to enter stock recovery. This should help.
https://motorola-global-portal.custhelp.com/app/answers/prod_answer_detail/a_id/94946/p/30,6720,8696
Sent from my XT1060 using Tapatalk
Still no luck...
garrettpen said:
Still no luck...
Click to expand...
Click to collapse
Sorry bud. Sounds like you might have bigger issues than I can help you with. However, you should try to connect it to your computer and see if you get anything. Also keep trying to power it on while on a USB or charger.
Hopefully someone with a similar experience can chime in.
Sent from my XT1060 using Tapatalk
http://forum.xda-developers.com/showthread.php?t=2477132
You can try to flash your phones stock ROM using this tool kit if you can get into the Boot loader. I just used it to flash back to stock on my sprint moto x. I know you are in a different situation but I can't hurt to try
Sent from my XT1056 using Tapatalk
garrettpen said:
I was rooting my phone I got to the point where I accepted the 4.4 update it downloaded installed shut off and that was it. I have tried every button combination, It had plenty of charge, and just to make sure I plugged it into a wall charger for 20 minutes. Any suggestions? The screen doesn't come on at all. Thanks, Garrett.
Click to expand...
Click to collapse
hold power button for 1 min if you feel the phone vibrate that is good.
now try holding Volume Up + Power will it boot into the bootloader.
If yes great time to restore to stock
If No then your phone is hard bricked and you will have to get it replaced.
one easy way to find out if your phone is hard bricked is to plug it into the computer and see what drivers it tries to install
if it say qhsusb_dload then i know for a fact that your phone is Hard bricked.
If that is the case call your carrier or go to a local store and tell them that your phone was on 4.2.2 and you downloaded the 4.4 OTA and it rebooted to install it and now it won't turn on at all they should give you a brand new phone because it was the phones problem.
When you get your new phone please post here first with What Carrier Moto X you have and what android version it is on 4.2.2 / 4.2.2 Camera Update / 4.4. and i will help you get your phone rooted and up and running correctly
Good Luck My Friend and please don't be afraid to ask for help
Mist likely hard bricked, you're not the only person this has happen too and won't be the last, if you're getting the driver mussing as previously posted ,I agree and its hard bricked. Which 4.2 stick firmware where you on? Pre camera update? At least you can call you're carrier and say you attempted to install an ota which in fact did brick your phone don't tell them you tried to root it of course, good.luck
Sent on my Moto X
Help me, blink my phone, moto x, after trying to install lollipop, corrupted bootloader and can not restore it!
We Need more details to be able to help you.
like...
What model do you have? XT1052? XT1058? XT1053, etc?
What rom was on your phone? Stock, custom? what andrid version?
What exactly did you do? flash rom xxxx using RSDLite? flash rom xxx using mFastboot? installed xxx.zip via TWRP?
What exact error do you see on your phone? (Can you post a picture)?
KidJoe said:
We Need more details to be able to help you.
like...
What model do you have? XT1052? XT1058? XT1053, etc?
What rom was on your phone? Stock, custom? what andrid version?
What exactly did you do? flash rom xxxx using RSDLite? flash rom xxx using mFastboot? installed xxx.zip via TWRP?
What exact error do you see on your phone? (Can you post a picture)?
Click to expand...
Click to collapse
XT1058, Lollipop used RSDLite..
The truth is that I see nothing as it does not turn with the corrumpido bootloader nothing happens ..
I'm trying to use the blankflash but nothing happens ..
It gives an error in the process ..
I am very aperriado because naum can buy another phone now, I'm broke, I need help ..
Thank right now
---------------------------------------------------------------------------------
I encontreu one aquivo here with various MSM8960 structures, however, I do not know if it is for something ..
J_Eudes said:
XT1058, Lollipop used RSDLite..
The truth is that I see nothing as it does not turn with the corrumpido bootloader nothing happens ..
I'm trying to use the blankflash but nothing happens ..
It gives an error in the process ..
I am very aperriado because naum can buy another phone now, I'm broke, I need help ..
Thank right now
---------------------------------------------------------------------------------
I encontreu one aquivo here with various MSM8960 structures, however, I do not know if it is for something ..
Click to expand...
Click to collapse
How did you get in this state? What did you do?
If trying to use blankflash, you will want to see this thread -> http://forum.xda-developers.com/moto-x/general/how-to-resurrecting-bricked-moto-x-t2629057 in particular around posts 442 through 455
KidJoe said:
How did you get in this state? What did you do?
If trying to use blankflash, you will want to see this thread -> http://forum.xda-developers.com/moto-x/general/how-to-resurrecting-bricked-moto-x-t2629057 in particular around posts 442 through 455
Click to expand...
Click to collapse
I do not understand English, ssou of Brazil , to read it all would take one year kkk my moto x lights the green led sometimes , that's good ?
You have the lollipop bootloader Archive ?
please save my life
J_Eudes said:
I do not understand English, ssou of Brazil , to read it all would take one year kkk my moto x lights the green led sometimes , that's good ?
Click to expand...
Click to collapse
Grean light means battery is dead and needs to be charged.
Travisdroidx2 said:
Grean light means battery is dead and needs to be charged.
Click to expand...
Click to collapse
What if I reload , it will come to life again ?
J_Eudes said:
What if I reload , it will come to life again ?
Click to expand...
Click to collapse
You need to get some charge in it if you are trying to flash anything. Unless you have a factory cable, a factory USB cable will charge the battery even if your phone is bricked
Travisdroidx2 said:
You need to get some charge in it if you are trying to flash anything. Unless you have a factory cable, a factory USB cable will charge the battery even if your phone is bricked
Click to expand...
Click to collapse
I have already put to load ...
This tool works here?
http://forum.xda-developers.com/showthread.php?t=2136738
J_Eudes said:
I have already put to load ...
Click to expand...
Click to collapse
Good.
Is that Qualcomm HS-USB*** thing still there in Device Manager when you have phone connected to PC?
What exactly did you flash in to brick your phone? Link to it, please
s5610 said:
Good.
Is that Qualcomm HS-USB*** thing still there in Device Manager when you have phone connected to PC?
What exactly did you flash in to brick your phone? Link to it, please
Click to expand...
Click to collapse
I was trying to put the new version of lollipop
****** NEWW ********
I can restore it, but only had to put other files and install new versions of python (2.7) and also the pyserial ...
######THANKS############
Thank you for helping me and for giving me attention! : Boa:: Toca aqui:: Dedos cruzados:: Rir:: Vitória:
KidJoe said:
We Need more details to be able to help you
Click to expand...
Click to collapse
What's happening? Bricks run away from us ) No, I have a hunch they return lately. Motorola isn't that easy quest.
Most annoying thought for me now is what will happen with those who raised their locked boot loaders to high Lollipop versions. Will they get flashable SBF (RSD) firmware, or not...
I could, but I lost a lot of night sleep kkkk other words, has that much to wrap your head get
Sent from my Moto X using XDA Premium 4 mobile app
Hello good afternoon
I unlocked the bootloader of my cell phone, XT1078,
I was giving a lot of problems after installing ROOT,
I returned it to version STOCK
It appeared an update by cell own, and he hung up in the middle of the upgrade,
Now when I connect IT APPEARS ON PC QHUSB_BULK,
Anyone know how to help me ??
waltermode said:
Hello good afternoon
I unlocked the bootloader of my cell phone, XT1078,
I was giving a lot of problems after installing ROOT,
I returned it to version STOCK
It appeared an update by cell own, and he hung up in the middle of the upgrade,
Now when I connect IT APPEARS ON PC QHUSB_BULK,
Anyone know how to help me ??
Click to expand...
Click to collapse
Start saving money for new device :3
LuK1337 said:
Start saving money for new device :3
Click to expand...
Click to collapse
I already bought a S4 gt-i9505,
you know tell me if there will be salvation?
waltermode said:
I already bought a S4 gt-i9505,
you know tell me if there will be salvation?
Click to expand...
Click to collapse
Try to send it to moto xD
LuK1337 said:
Try to send it to moto xD
Click to expand...
Click to collapse
I sent
power my device to show me a bootloader
and hung back,
They could have put the system ¬ ¬
excuse the English
waltermode said:
I sent
power my device to show me a bootloader
and hung back,
They could have put the system ¬ ¬
excuse the English
Click to expand...
Click to collapse
I have the same problem
Have you solved it?
Motorola did it?
mothe13 said:
I have the same problem
Have you solved it?
Motorola did it?
Click to expand...
Click to collapse
Unresolved,
Motorola only changing the motherboard
Hi as you notice on my profile my name is Sergio Kuret and i open thiss Thread to talk about something that happened to me last nigth.
First of all i tried with not result a lot of thing to fix this.
Last nigth i was updating my Moto G XT1064 to the original stock Android Kit Kat 4.4.4, cause my phone was pretty slowly with the Android Lollipop 5.0.2, and i tried to downgrade my phone for that version. i did all the things that the post said and it was fine my phone start perfectly, great after that the lolipop moto g update apearce so i said why not? (terrible mistake ).
The installation start downloading and after the phone start to installing the update but at this point the phone dead so i tried all that i found on google with not results.
i need your help on this guys cause i dont know what to do the phone is new and i dont want to lose it.
Things that i tried with not results:
1- PRESS THE POWER BUTTON AND CONNECT THE PHONE TO A WALL CHARGER, PRESS IT 5 MINUTES (NOT WORKS).
2-PRESS THE VOLUME - AND THE POWER BUTTON FOR 2 MINUTES (NOT WORKS).
3-LEAVE THE PHONE CHARGIN ALL NIGTH AND THEM TRY THE METHOD 1 AND 2 (NOT WORKS).
at this point the phone just blink the LED several times and the phone wont startup.
HELP ME GUYSSSS!!!!!
PD: Sorry for my english
skuret said:
Hi as you notice on my profile my name is Sergio Kuret and i open thiss Thread to talk about something that happened to me last nigth.
First of all i tried with not result a lot of thing to fix this.
Last nigth i was updating my Moto G XT1064 to the original stock Android Kit Kat 4.4.4, cause my phone was pretty slowly with the Android Lollipop 5.0.2, and i tried to downgrade my phone for that version. i did all the things that the post said and it was fine my phone start perfectly, great after that the lolipop moto g update apearce so i said why not? (terrible mistake ).
The installation start downloading and after the phone start to installing the update but at this point the phone dead so i tried all that i found on google with not results.
i need your help on this guys cause i dont know what to do the phone is new and i dont want to lose it.
Things that i tried with not results:
1- PRESS THE POWER BUTTON AND CONNECT THE PHONE TO A WALL CHARGER, PRESS IT 5 MINUTES (NOT WORKS).
2-PRESS THE VOLUME - AND THE POWER BUTTON FOR 2 MINUTES (NOT WORKS).
3-LEAVE THE PHONE CHARGIN ALL NIGTH AND THEM TRY THE METHOD 1 AND 2 (NOT WORKS).
at this point the phone just blink the LED several times and the phone wont startup.
HELP ME GUYSSSS!!!!!
PD: Sorry for my english [emoji14]
Click to expand...
Click to collapse
Ask in the forum for the XT1064, not here. This forum is for Xposed Framework.
Spott07 said:
Ask in the forum for the XT1064, not here. This forum is for Xposed Framework.
Click to expand...
Click to collapse
Sorry im new here, could you please show me wwhere is it? a ink or something?
Thanks for the answer :laugh:
so ive been busy with this moto g, and to get it to run again, i got it to work when i help the power+Volume-down button for 120 secs with the charger plugged in, I unlocked the bootloader, but i cant get the official rom to work reliably, ive gotten partition table errors, and hab errors..
any help? I would really appreciate it!
Try to flash this stock 5.0.1 - https://dl.dropboxusercontent.com/u/18623290/Moto%20G%202015%20%5BXT1072%5D%20Restore%20to%20Android%205.0.2%20(22.46.28).zip
Wanted_X2 said:
Try to flash this stock 5.0.1 - https://dl.dropboxusercontent.com/u/18623290/Moto%20G%202015%20%5BXT1072%5D%20Restore%20to%20Android%205.0.2%20(22.46.28).zip
Click to expand...
Click to collapse
Thanks for the suggestion, but ive found a xda article http://forum.xda-developers.com/moto-g-lte/general/stock-6-0-marshmallow-europe-reteu-t3338075 for android 6.0 and ****ed up.. so now its hard bricked.. XD
So here is the new post ive made with more info!
http://forum.xda-developers.com/moto-g-lte/help/hard-bricked-moto-g-xt1072-help-dx-t3382987
Atleast i already want to thank you for the reply..
im trying to figure out how this site works.. XD