Official CyanogenMOD 13 for ZUK Z1 is available.
CyanogenMod 13 ROM:
download.cyanogenmod.org/?device=ham
Procedure:
1. Root ZUK Z1 (Threads are available)
2. Install Recovery (TWRP) (Threads are available)
3. Install CyanogenMod 13 and Marshmallow compatible Gapps using Recovery Mode.
Note:
Backup your data before proceeding.
Factory reset is recommended before installing.
Your warranty will be void.
I am not responsible if device get bricked.
Device info:
https://wiki.cyanogenmod.org/w/Ham_Info
CyanogenMod 13 changelog:
http://www.cmxlog.com/13/ham/
Great. I was waiting for this to unlock and leave cos. Anyone knows if this is already usable..?
Inviato dal mio Z1 utilizzando Tapatalk
So many bugs are present, wait for 3-4 more nightlies
I think this thread should be in Android Development, and not in General.
I am not developing this rom, nor the members.
This is just discussion thread.
Currently i am having following issues:
1. Wifi is not connecting
2. Quick setting toggle absent
3. No double tap to wake.
kdpatil45 said:
Currently i am having following issues:
1. Wifi is not connecting
2. Quick setting toggle absent
3. No double tap to wake.
Click to expand...
Click to collapse
Ok!
Then you should change the [ROM] in the title with [Q&A] or [DISCUSSION]
Wifi works fine. RIL works fine. No reboots until.
Revanbtk said:
Wifi works fine. RIL works fine. No reboots until.
Click to expand...
Click to collapse
what about quick setting panel???
kdpatil45 said:
what about quick setting panel???
Click to expand...
Click to collapse
Same here, WiFi shows networks but can´t connect. Quick settings not visible.
When you upgrade from Cyanogen Mod 12.1 do you need to flash Gapps for MM?
C-Store said:
Same here, WiFi shows networks but can´t connect. Quick settings not visible.
Click to expand...
Click to collapse
After rebooting / wiping cache quick settings are there, but still no wifi connection possible ...
kdpatil45 said:
Currently i am having following issues:
1. Wifi is not connecting
2. Quick setting toggle absent
3. No double tap to wake.
Click to expand...
Click to collapse
I am same as you. wifi can not connect
---------- Post added at 12:41 PM ---------- Previous post was at 12:37 PM ----------
MrColdbird`s cm13.0 is great .Its wifi can connect (at least on my Z1). I flash the official cm 13.0 today，and I also find its wifi can not connect . You can try it.
make a clean installation.
Guys can we merge these two threads into one? As it's confusing to have two threads about the same thing:
http://forum.xda-developers.com/zuk-z1/development/official-cyanogenmod-13-zuk-z1-ham-t3297293
http://forum.xda-developers.com/zuk-z1/general/rom-t3297289
As we are not developing the official CM Nightly we should keep this thread and just discuss about it here. I think there is no need for this thread in development. Please decide and merge it. Thanks.
Shivver said:
Guys can we merge these two threads into one? As it's confusing to have two threads about the same thing:
http://forum.xda-developers.com/zuk-z1/development/official-cyanogenmod-13-zuk-z1-ham-t3297293
http://forum.xda-developers.com/zuk-z1/general/rom-t3297289
As we are not developing the official CM Nightly we should keep this thread and just discuss about it here. I think there is no need for this thread in development. Please decide and merge it. Thanks.
Click to expand...
Click to collapse
I think you are right, just ignore other threads and discuss here.
GAPPS insufficient space Err 70
Hello,
installed your latest build. but I can´t install GAPPs micro. I get Error 70 insufficient space. I Use CM recovery. Can you give me a hint ?
Thanks !
Chris_K900 said:
Hello,
installed your latest build. but I can´t install GAPPs micro. I get Error 70 insufficient space. I Use CM recovery. Can you give me a hint ?
Thanks !
Click to expand...
Click to collapse
Try TWRP
Planet X said:
Try TWRP
Click to expand...
Click to collapse
Thanks. That was easy
It's safe to automatic update from cm12.1 ?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Working/Not Working List
Here
Install instructions
WARNING - this could wipe your internal storage and internal sd. So make a backup before.
connect your BACKUPED pollux with your pc
flash the 2 partitions:
Code:
fastboot flash boot boot.img
fastboot flash system system.img
reboot to recovery and wipe data
Update instructions
flash updated boot.img and system.img
Code:
fastboot flash boot boot.img
fastboot flash system system.img
reboot
Sources
Manifest
Downloads
Pollux
Pollux_windy
Gapps
SuperSU
Thanks to
adrian-bl for porting lollipop to yuga. This build is based on this.
XDA:DevDB Information
AOSP 5.0 Lollipop, ROM for the Sony Xperia Tablet Z
Contributors
pollonamid, HeadFox
ROM OS Version: 5.0.x Lollipop
Version Information
Status: Alpha
Created 2014-11-20
Last Updated 2015-01-07
CHANGELOG
alpha 1 - 20.11.14
initial release
alpha 2 - 20.11.14
screen rotation now working
alpha 3 - 25.11.14
screen backlight fixed. (hopefully black screen of death, too)
TODO:
fix mobile data on windy (lol)
replace recovery
fix speakers
clean device trees
make flashable zip (multirom, yay)
fix camera
Great!
But please make a version for pollux_windy, I and many people here will help you to test
FiDra said:
Great!
But please make a version for pollux_windy, I and many people here will help you to test
Click to expand...
Click to collapse
OK. I will try to make a few builds for windy, too.
EDIT: windy build is uploading. Should be there in a few minutes.
Please remind, it is very unstable and untested. It is totally not ready for daily use.
I'm downloading now
FiDra said:
I'm downloading now
Click to expand...
Click to collapse
cool.
For me the rom is almost usable. The most annoying issue is that the display sometimes don't wakes up after going to sleep.
And then how did you wake it up?
FiDra said:
And then how did you wake it up?
Click to expand...
Click to collapse
hard reset
I think the issue is that the kernel can't command the display backlight. I look into this next.
Just flashed, it's really fast!!! everything seems to be okay now. My tablet is WiFi 32 GB, but it just recognized 16 GB
As you mentioned, the most annoying issue is the screen refuses to wake.
Thanks for bringing this to tablet z.
Guys, this ROM is really fast, try this. Here are some workaround for the known issues:
- use screen filter to adjust the brightness: https://play.google.com/store/apps/details?id=com.haxor
- use knockr app to prevent screen from enter deepsleep of death.
Really nice to see that we get 5.0 on the z. Keep up the good work!
I uploaded a new kernel. It should fix sensors so screen rotation works now.
Pollux_windy
Pollux
Please leave feedback.
screen rotation works for me on pollux
Thanks for this awsome work
---------- Post added at 12:35 AM ---------- Previous post was at 12:26 AM ----------
is there any possibility to root this rom ?
i've tried it by flashing SuperSu from this post
http://forum.xda-developers.com/showpost.php?p=55256620&postcount=1
i thougth if it's working on HTC M7 why not on pollux, but............
Great stuff! Can't wait to try it out on my own tablet. I have the wifi only version as well to flash the rom on.
Sent from my Nexus 5 using XDA Free mobile app
pollonamid said:
I uploaded a new kernel. It should fix sensors so screen rotation works now.
Pollux_windy
Pollux
Please leave feedback.
Click to expand...
Click to collapse
Does it fix the screen deep sleep also?
HA !!! Root is working !!!
How to root this incredible ROM:
copy Chainfires SuperSU.zip from http://forum.xda-developers.com/show...20&postcount=1 on your SD
enable Developer-Options by clicking the Buld.Nr. in Settings ---> about Device/Phone/Tablet
flash it via Recovery
reboot
when recovery says: " Fix root"; say yes
finished:laugh:
---------- Post added at 02:01 AM ---------- Previous post was at 01:53 AM ----------
http://forum.xda-developers.com/showpost.php?p=55256620&postcount=1
pollonamid said:
I uploaded a new kernel. It should fix sensors so screen rotation works now.
Pollux_windy
Pollux
Please leave feedback.
Click to expand...
Click to collapse
So the screen wakeup remain the main issu if I'm right..
lupick said:
So the screen wakeup remain the main issu if I'm right..
Click to expand...
Click to collapse
Yes. And I don't know how to fix at the moment
It's a lot of try and error.
Silly question alert but is there a way of getting this as a secondary rom in multirom at all?
scoobydu said:
Silly question alert but is there a way of getting this as a secondary rom in multirom at all?
Click to expand...
Click to collapse
This question isn't that silly.
I also thought about that already. In the system.img form it's not possible. But it should be possible to package the things up in a flashable zip.
Then it could work. I will try it today. I don't get further with the not working features. So I try this.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Unlocked Bootloaders Only!
Instructions:
- Boot into Recovery
- Full Wipe (dalvik, system, data, cache)
- Flash Rom
- Flash Gapps (optional)
- Reboot
Bugs:
- Testing...
1 simple rule: Logs or nothing happened!
Download: BasketBuild
Gapps Don't forget to choose the proper 5.1 gapps.
Don't ask for bug fixes if you don't give me a way to fix or a log of the problem. :good:
Everyone should help any way they can. Developers aren't slaves. Thank You.
Don't ask for eta's! Be patient!
This is a development thread, here we just talk about testing and development. Is extremely hard to talk about testing here because when I say something we already have another page and no one see.
Please don't spam with useless posts. Talk about omni and do questions here: http://forum.xda-developers.com/xperia-sp/help/qa-omnirom-t3148719
Thanks to:
-All the Omni Team
-uberlaggydarwin
-asanan1
-Adrian DC
-Dark Passenger
XDA:DevDB Information
(Unofficial) Xperia SP OmniROM, ROM for the Sony Xperia SP
Contributors
Mrcl1450
Source Code: https://github.com/Mrcl1450/android_device_sony_huashan
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
Version Information
Status: Testing
Created 2015-07-02
Last Updated 2015-08-15
ChangeLog:
Code:
[B]23/09/15[/B]
- Initial release
How to do a logcat1º Download Logviewer and extract the files.
2º Connect the phone to pc an check if you have usb debugging active
3º Opening logview.bat it will ask for adb path (adb is in the logview folder)
4º Now you should see the log spamming about sensors. Right click in the message and press "Hide with this tag". Do this for the 5 sensors messages and you should be good to start logging.
5º Now go to the menu adb and click reset logs. After this reproduce the bug.
Example:
Camera app is crashing.
-Click reset log.
-Open camera.
-Disconnect device from pc to stop logging
-Go to file, save, give a name.
6º Send me the log.
Wow i can't believe this?
Oh yeah ! . downloading now !
Running BlissPop v3.5 boosted with Tangerin 5.2
Installed the "updated" version from basketbuild. For now the only bug i found is the camera, it doesent work. Tried with google camera too but its says that it cant connect to the camera.
Sound is working?
Mrcl1450 said:
Sound is working?
Click to expand...
Click to collapse
I couldn't try it becouse dialer was laggy and i couldn't call at all so i had to change rom. Tomorrow i'll retry to flash it and i'll let u know for all the bugs.
EDIT: i read about problems in other devices too, problems like bad ram management and random reboots. But with t-kernel that is going to be solved i guess. Devices like oneplus one or nexus 5 are also having problems with the camera.
@fantamadnesss Yeaa.. but other devices are not support by Mrcl1450
Mrcl1450 said:
Sound is working?
Click to expand...
Click to collapse
No. There is no sound anywhere.
@Mrcl1450 did another test, clean flash of course only with gapps and super su: no sound, i cant call (laggy dialer) and camera is not working. I think that's all.
New Build 12/07/15
Need people to test it and list bugs. Thanks.
no sim.
i tryed with tangerine v6.3 but phone didn't
open.
Clean install, only ROM.
No sound, uknow baseband, camera FC, laggy in browser and phone.
But now screen off when we lock
Project is dead?
DahakePL said:
Project is dead?
Click to expand...
Click to collapse
No
So, where is the updated recovery @Mrcl1450? I don't see anything in the second post.
Thanks in advance.
@Mrcl1450, how the project is going actually?
Guys sorry for the low activity here. :angel:
So... how many still interested in this?
Mrcl1450 said:
Guys sorry for the low activity here. :angel:
So... how many still interested in this?
Click to expand...
Click to collapse
I interested
new Cyanogenmod ROM for our Elephone M2
i am not the dev of this Rom. thanks goes to Mephostoph.
Just sharing it here:
Root your phone / how to use flashtools
props @Kangburra here
How to Install :
1. flash a custom Recovery
2. Place the Rom into your sdcard
3. Perform a fullwipe
4. Install it
--------------------------------------------------
Rom Link : https://mega.nz/#!qgcTEbgL!62rG6FiVFbnI09Gh42HuCbUkUmVKRmADbTFsPP4IgdE
---------------------------------------------
Knowing Bugs:
No
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
----------------------------------------------
Original Thread :
http://bbs.elephone.hk/forum.php?mod=viewthread&tid=9853&page=1&extra=#pid102680
CM12.1 build:
This ROM is built on the base of [ROM] [CM12.1] [Elephone M2] [RC1] [2016.02.27]and fixed the bugs in it.
http://bbs.elephone.hk/forum.php?mod=viewthread&tid=9845&highlight=CM#.VtefivmECYY
Thanks!
hello someone tried it?: D
First,sorry for my english. This Rom works good but the Akku is very fast down. And i miss the Timeshedule on/off Funktion and the dnd Funktion.
Hi guys,
This ROM is version 1 android 5.1.1 (CM 12.1) seems to be working just fine (original post)*
A newer ROM version 2 is out here
I am not going to test RC2 yet, I will keep running RC1 for now.
Not working in this version (RC1)
*Bt audio
*Dictophone app
*Fingerprint
Check the original thread (above for more details)
This is how I got this working:
Get TWRP working: follow this guide
1. flashing the rom after doing wipe [5 mins] - 1 minute flash and 3-4 mins optimizing app
2. flashing superSU [2mins] - I used BETA-SuperSU-v2.68
3. flashing xposed [5mins] - I used xposed-v78-sdk22-arm64.zip. Note: be patient needs time to reboot and optimize app again..
updates will follow!
Regards,
Steve
tethering and wifi hotspot disappear
hi i am a user from belgium (country)
after flashing the rom the smartphone lose the option of thethering and wifi hotspot. i only have -plane mod -vpn and -emergency
I just installed cm rc2, so far it's look good, fast and stable, everything is working except the magnet sensor,
I'm using a flip case with magnet, in the stock rom the sensor was working and the case automatically turned off/on the screen, now it's not working.
Hope it will be fixed.
omrizn said:
I just installed cm rc2, so far it's look good, fast and stable, everything is working except the magnet sensor,
I'm using a flip case with magnet, in the stock rom the sensor was working and the case automatically turned off/on the screen, now it's not working.
Hope it will be fixed.
Click to expand...
Click to collapse
i will try rc 2 ! xD
soon ( some monts) a cm 13 version will be available on bbs.elephone.hk
nevermind
i try this rom and works fine but, the magnet sensor doesnt work and the voice recorder says a mistake like "The mic is in use".
No work voicenotes in whatssapp obviusly.
Some idea?
EDIT: for the voice recorder i can solved changing format to .wav but de voice notes in whatsapp still without working.
EDIT2: Sorry for my english.
EDIT3: new version for try , i cant post the link beacuse spam...
when i try i say my impresions, in a few days maybe
I tried to work both the recorder and voice whatsapp (sorry google translator)
nirvana06 said:
I tried to work both the recorder and voice whatsapp (sorry google translator)
Click to expand...
Click to collapse
work or failure?
im spanish, dont worry about the english mine is bad too
RaKaL said:
work or failure?
im spanish, dont worry about the english mine is bad too
Click to expand...
Click to collapse
Work!
nirvana06 said:
Work!
Click to expand...
Click to collapse
Thank you.
Maybe a bad installation.
I will try reinstall the "new version".
Any work on the fingerprint scanner?
misterright1 said:
Any work on the fingerprint scanner?
Click to expand...
Click to collapse
No in this rom
RaKaL said:
No in this rom
Click to expand...
Click to collapse
What? you mean "Not in this rom" right?
misterright1 said:
What? you mean "Not in this rom" right?
Click to expand...
Click to collapse
Yes, sorry for my english
misterright1 said:
Any work on the fingerprint scanner?
Click to expand...
Click to collapse
I will have a look at it so maybe I can fix it blindly
BlueFlame4 said:
I will have a look at it so maybe I can fix it blindly
Click to expand...
Click to collapse
wow , what a great news!
Thank you
Removed by request from @mohancm, as this is currently his build.
More information
!!!WARNING!!!
This ROM is still experimental for this device - flash on your own risk
This specific build is not built by me - it's build by MohanCM
The next one should be built by me because I want to be a maintainer; I still need to do some more work until I get a decent build
Screenshots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Bugs:
You tell me ;P
You have too many posts of same topic.
nicolasmart said:
!!!WARNING!!!
This ROM is still experimental for this device - flash on your own risk
This specific build is not built by me - it's build by MohanCM
The next one should be built by me because I want to be a maintainer; I still need to do some more work until I get a decent build
Screenshots:
Bugs:
You tell me ;P
Click to expand...
Click to collapse
All works?
If you have it installed....
I come back to home at 4 PM and i can test it too...
Latest Official TWRP 3.2 it's ok for install this ROM? thanks.
Sent from my Mi A1 using XDA Labs
Sure will try.
Will report if find something.
Well let me get my hands dirty on this bad boy then..
Guess you have network problem too many duplicate threads. Thanks anyway downloading!
@nicolasmart you're spamming the whole thread
Hellrazoraj said:
Well let me get my hands dirty on this bad boy then..
Click to expand...
Click to collapse
Nice. Waiting for your feedback....
thank you. i request to make android o roms
Would be nice to have a list of working/not working features...
JoKeRLeE said:
@nicolasmart you're spamming the whole thread
Click to expand...
Click to collapse
Its technical issue. He is not spamming
Additional Information
!!!WARNING!!! This build is not stable!!! Install on your own risk!
nicolasmart said:
!!!WARNING!!! This build is not stable!!! Install on your own risk!
Click to expand...
Click to collapse
What about bugs?
Sent from my Mi A1 using XDA Labs
it doesnt work!!! i booted to twrp for oreo & tried flashing it, but it gave error. Can you please upload the file to some other server or website the current one that being used didnt auto download the file. had to change server & all.
Do i need to downgrade to nougat before flashing this?
I just read "need nougat firmware"
Hellrazoraj said:
it doesnt work!!! i booted to twrp for oreo & tried flashing it, but it gave error. Can you please upload the file to some other server or website the current one that being used didnt auto download the file. had to change server & all.
Click to expand...
Click to collapse
You need Nougat before flashing.
Sent from my Mi A1 using XDA Labs
1 st Custom rom in XDA for Mi A1
Awesome great work devs, hope you guys make this rom stable.
Still doesnt work.. i flashed nougat 7.1.2, booted to twrp using 3.1.1.1 which didnt recognise my internal storage space. I again flashed oreo & booted via twrp 3.2.1 which is for oreo & my laptop detected the internal storage which wasnt happening in 3.1.1.1
nicolasmart said:
!!!WARNING!!! This build is not stable!!! Install on your own risk!
Click to expand...
Click to collapse
Have you tried flashing this yourself to your device?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
*** Disclaimer
I am not responsible for any damage you made to your device
You have been warned
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today
Features:
https://github.com/crdroidandroid/crdroid_features/blob/10.0/README.mkdn
Flashing Instructions:
Pre-installation:
[*]gapps (Download from here)(or any gapps you want)
[*]Magisk 20.0 or newer for root (after first boot) - (Download from here)[/LIST]
First time installation:
<!-- change according to your needs -->
step 1
1.Flash Rom and TWRP Installer
2.Reboot to twrp
3.Wipe(data,cache,dalvik..)
4.Gapps & Magisk
Sources:
ROM: https://github.com/crdroidandroid
Kernel: celtare21/kernel_essential_msm8998-1
Device-celtare21/android_device_essential_mata-1
vendor-celtare21/vendor_essential-1
2020-3-22
Download:
ROM crDroidAndroid-10.0-20200308-mata-v6.4
gapps (Download from here)(or any gapps you want)
Known issues:
usb network sharing
<!-- list here -->
Visit official website @ crDroid.net
crDroid Community Telegram
Nice!
You need to be on Android 10 prior to flashing?, correct?
nijohnson said:
Nice!
You need to be on Android 10 prior to flashing?, correct?
Click to expand...
Click to collapse
yes
zzkeier said:
yes
Click to expand...
Click to collapse
Thanks!
Thank you! Running pretty smoothly. Haven't come across any bugs or anything so far, if I do I'll let you know.
I know the subject says it is gappless, but we can still flash gapps after first boot if we want, right?
Google assistant doesnt seem to be working - when going into assistant settings and trying to turn on "access with Voice Match" - you cannot enable the feature and it says "something went wrong - Try again".
My bluetooth is dying.
Over and over and over. UGH!
stompysan said:
I know the subject says it is gappless, but we can still flash gapps after first boot if we want, right?
Click to expand...
Click to collapse
yepbut the best way is flash before magisk
nijohnson said:
My bluetooth is dying.
Over and over and over. UGH!
Click to expand...
Click to collapse
try to wipe the dalvik/art in twrp
agmyers76259 said:
Google assistant doesnt seem to be working - when going into assistant settings and trying to turn on "access with Voice Match" - you cannot enable the feature and it says "something went wrong - Try again".
Click to expand...
Click to collapse
Which gapps are you using?opengapps?
Yes, the beta version, should I try another kind? Nano gapps, specifically
Smooth so far, only issues titanium backup isn't working for me.
---------- Post added at 04:45 PM ---------- Previous post was at 04:10 PM ----------
agmyers76259 said:
Yes, the beta version, should I try another kind? Nano gapps, specifically
Click to expand...
Click to collapse
Cyanogens Nano Gapps package worked for me.
zzkeier said:
try to wipe the dalvik/art in twrp
Click to expand...
Click to collapse
Liking the ROM so far!
Thanks. I tried FlameGapps - nano, and am having better luck.
I'm having an issue with titanium backup too, but its been giving me trouble prior to this ROM. Some apps just wont restore. Titanium just hangs. Others are fine.
The app EdgeAction seems to be killed occasionally. Or stops working. Not sure if its ROM related or not.
I've also got "chipmunked voices" on calls, but turning speaker on and off fixes the issue.
Lowest call volume is really loud.
zzkeier said:
Which gapps are you using?opengapps?
Click to expand...
Click to collapse
Are you building with Kuran's trees by any chance? I ran into that exact issue before I switched from his trees to Anay Wadhera's trees for Pixel Experience, it's an issue with the Sounds driver Kuran has as far as I can tell.
EDIT: just looked at who's trees your building with, you're indeed building with Kuran's trees, try with anay's (anayw2001 on GitHub) trees, you'll likely have to do some work just to get things to build, though)
Does it have system wide dark mode? Including notifications?
Waancho said:
Does it have system wide dark mode? Including notifications?
Click to expand...
Click to collapse
Yes, it also has swipe for google home too, which I hadnt seen on any other roms.
Can,t do the first setup!
after done flashing using opengapps nano and flame no luck to do the first setup. after select the language the phone stuck and just a sec... screen. and suggestions?