Related
hi guys....i've downloaded the last kernel sources of franciscofranco 2.35.10 kernel....i've added the sippolo's workaround and then increase the HZ value of the kernel(set at 500) for my custom rom.....after i've done
Code:
make thunderg-perf_defconfig
make zImage -j4
it stuck at this error
Code:
drivers/input/touchscreen/mcs6000_ts.c: In function ‘mcs6000_ts_ioctl_down’:
drivers/input/touchscreen/mcs6000_ts.c:430:6: error: implicit declaration of function ‘gpio_configure’
drivers/input/touchscreen/mcs6000_ts.c: In function ‘mcs6000_ts_probe’:
drivers/input/touchscreen/mcs6000_ts.c:733:25: warning: unused variable ‘hw_ver’
drivers/input/touchscreen/mcs6000_ts.c:733:17: warning: unused variable ‘fw_ver’
make[3]: *** [drivers/input/touchscreen/mcs6000_ts.o] Errore 1
i don't understand why......i think it is a lib problem.....but seems that all libraries are imported!!!can anyone help me??? thnx in advice
Which toolchain?
Sent from my LG-P500 using XDA Premium App
lupohirp said:
hi guys....i've downloaded the last kernel sources of franciscofranco 2.35.10 kernel....i've added the sippolo's workaround and then increase the HZ value of the kernel(set at 500) for my custom rom.....after i've done
Code:
make thunderg-perf_defconfig
make zImage -j4
it stuck at this error
Code:
drivers/input/touchscreen/mcs6000_ts.c: In function ‘mcs6000_ts_ioctl_down’:
drivers/input/touchscreen/mcs6000_ts.c:430:6: error: implicit declaration of function ‘gpio_configure’
drivers/input/touchscreen/mcs6000_ts.c: In function ‘mcs6000_ts_probe’:
drivers/input/touchscreen/mcs6000_ts.c:733:25: warning: unused variable ‘hw_ver’
drivers/input/touchscreen/mcs6000_ts.c:733:17: warning: unused variable ‘fw_ver’
make[3]: *** [drivers/input/touchscreen/mcs6000_ts.o] Errore 1
i don't understand why......i think it is a lib problem.....but seems that all libraries are imported!!!can anyone help me??? thnx in advice
Click to expand...
Click to collapse
.35 kernel have new GPIO library, you should code sippolo's workaround into new driver, do not replace whole file.
mik_os said:
.35 kernel have new GPIO library, you should code sippolo's workaround into new driver, do not replace whole file.
Click to expand...
Click to collapse
Aaaaa i don't know that thanks now it works ;-) now the next step i'm ttying to port the acer liquid multitouch fix thanks mik
Sent from my LG-P500 using XDA App
If you can fix also the tethering and the random bugs
use pdanet for tethering
now i'm stucking at this error...((
arch/arm/mm/built-in.o: In function `__flush_icache_all':
/home/pasquale/Scrivania/Franco.Kernel/2.6.35/arch/arm/include/asm/cacheflush.h:402: undefined reference to `swapper_space'
arch/arm/mm/built-in.o: In function `____atomic_set_bit':
/home/pasquale/Scrivania/Franco.Kernel/2.6.35/arch/arm/include/asm/bitops.h:46: undefined reference to `swapper_space'
arch/arm/mm/built-in.o: In function `spin_unlock':
/home/pasquale/Scrivania/Franco.Kernel/2.6.35/include/linux/spinlock.h:324: undefined reference to `swapper_space'
mm/built-in.o: In function `sync_page':
/home/pasquale/Scrivania/Franco.Kernel/2.6.35/mm/filemap.c:190: undefined reference to `swapper_space'
mm/built-in.o: In function `set_page_dirty':
/home/pasquale/Scrivania/Franco.Kernel/2.6.35/mm/page-writeback.c:1181: undefined reference to `swapper_space'
mm/built-in.o:/home/pasquale/Scrivania/Franco.Kernel/2.6.35/mm/page-writeback.c:1335: more undefined references to `swapper_space' follow
make: *** [.tmp_vmlinux1] Errore 1
Click to expand...
Click to collapse
seems another time a library problem... anyone can help me??
lupohirp said:
now i'm stucking at this error...((
seems another time a library problem... anyone can help me??
Click to expand...
Click to collapse
What have you patched?
It just says it's missing the swapper_space function header, it's not defined.
franciscofranco said:
What have you patched?
Click to expand...
Click to collapse
nothing franco....i've only added sippolo's workaround for base to port acer liquid multitouch fix and set kernel to 500hz i've worked only on mcs6000_ts......but it stuck at this error i don't know why!!! i think it is a library problem....something that is missing...but i don't know what are the libraries that i must install if it is this the problem!(
You downloaded the latest sources? Because I haven't compiled it, I just merged the patches, I might have forgot to apply something. In this case it says it misses the swapper_space reference.
http://lxr.free-electrons.com/source/mm/swap_state.c#L40
http://lxr.free-electrons.com/source/include/linux/mm.h#L771
http://lxr.free-electrons.com/source/include/linux/swap.h#L319
Add the swapper_space code to those files and compile again.
franciscofranco said:
You downloaded the latest sources? Because I haven't compiled it, I just merged the patches, I might have forgot to apply something. In this case it says it misses the swapper_space reference.
http://lxr.free-electrons.com/source/mm/swap_state.c#L40
http://lxr.free-electrons.com/source/include/linux/mm.h#L771
http://lxr.free-electrons.com/source/include/linux/swap.h#L319
Add the swapper_space code to those files and compile again.
Click to expand...
Click to collapse
yes franco i've downloaded latest sources! thanks now i'm going to add it and then try!
franco the swapper_space code that you posted is already there in the three files((
I dunno, I have to leave now, I'll look at it later.
I'm sorry to disappoint you, but there ain't a problem with the kernel, I just compiled it without any modification, just like it is in the sources and it compiles fine. Try to make clean and make distclean, then compile again.
franciscofranco said:
I'm sorry to disappoint you, but there ain't a problem with the kernel, I just compiled it without any modification, just like it is in the sources and it compiles fine. Try to make clean and make distclean, then compile again.
Click to expand...
Click to collapse
yeah franco i know.....i think it is a libraries problem on my linux distro.....but i have installe all the binutils and the header files yesterday also i have tried a dirty hack i tried to set CONFIG_SWAP=n in the thunderg_perf_defconfig configuration file....compiled succesfully but the phone doesn't started ...thanks anyway franco!
when I do: "make otapackage" i have this error after some minutes
make: *** Nessuna regola per generare l'obiettivo "vendor/lge/thunderg/proprietary/lib/libril.so", necessario per "out/target/product/thunderg/system/lib/libril.so". Arresto.
Click to expand...
Click to collapse
How I can resolve it?
I've read Noejn HowTo.
you have to copy the libril.so to your target - the lib gets linked with some other libs so the lib is needed on this place before other libs can be compiled.
I've copied libril.so in out/target/product/thunderg/system/lib... Now i try again with "make otapackage"
For future, kindly set LC_MESSAGES=C in your environment for compiling. Getting compile error output in random languages is rather annoying if you need help.
dr.notor said:
For future, kindly set LC_MESSAGES=C in your environment for compiling. Getting compile error output in random languages is rather annoying if you need help.
Click to expand...
Click to collapse
/offtopic/
you back again doktornotor?
Sent from my LG-P500
Thank you! I've compiled fine CM7 and it works! But... How I can compile "Launcher2" from CM/Android sources?
EDIT: mmm package/apps/Launcher2
0x0v3rfl0w said:
Thank you! I've compiled fine CM7 and it works! But... How I can compile "Launcher2" from CM/Android sources?
EDIT: mmm package/apps/Launcher2
Click to expand...
Click to collapse
so a new cm7 is coming from u?
mathew3184 said:
so a new cm7 is coming from u?
Click to expand...
Click to collapse
I don't know... Maybe I'll create it only for me... i don't know...
Hello I'm trying to compile cyanogenmod 7 with subskyper tass device to try to mantain this project update in line with the original philosophy: keep it 100% cyanogenmod without any tweaks
When I compile I face two errors that broke my compilation:
1-
device/samsung/tass/overlay/frameworks/base/core/res/res/values/config.xml:95: error: Resource at swap_volume_keys_orientation appears in overlay but not in the base package; use <add-resource> to add.
make: *** [out/target/common/obj/APPS/framework-res_intermediates/package-export.apk] Errore 1
make: *** Eliminazione del file "out/target/common/obj/APPS/framework-res_intermediates/package-export.apk"
make: *** Attesa per i processi non terminati....
This one I commented out the line reguarding swap_volume_keys_orientation in file
device/samsung/tass/overlay/frameworks/base/core/res/res/values/config.xml
but when i continue...
2-
prebuilt/linux-x86/toolchain/arm-eabi-4.4.3/bin/../lib/gcc/arm-eabi/4.4.3/../../../../arm-eabi/bin/ld: out/target/product/tass/obj/SHARED_LIBRARIES/libandroid_runtime_intermediates/AndroidRuntime.o: in function android::gRegJNI:AndroidRuntime.cpp(.data.rel.ro+0x148): error: undefined reference to 'register_android_hardware_fm_fmradio(_JNIEnv*)'
collect2: ld returned 1 exit status
make: *** [out/target/product/tass/obj/SHARED_LIBRARIES/libandroid_runtime_intermediates/LINKED/libandroid_runtime.so] Errore 1
make: *** Attesa per i processi non terminati..
Someone faced same problems?
Any ideas?
thanks a lot
Send PM With The Error To Subpsyke
t-r-e said:
Send PM With The Error To Subpsyke
Click to expand...
Click to collapse
done. I hope he will answer me cause I'm able to sync repos in a couple of hours, so it will be easy to mantain pure cyanogenmod 7 for our sgm.
mebitek said:
done. I hope he will answer me cause I'm able to sync repos in a couple of hours, so it will be easy to mantain pure cyanogenmod 7 for our sgm.
Click to expand...
Click to collapse
Best Luck Buddy Don't Give Up Early , We Look Forward To See Your Work As We Need To Keep Subpsyke Project Alive
prebuilt/linux-x86/toolchain/arm-eabi-4.4.3/bin/../lib/gcc/arm-eabi/4.4.3/../../../../arm-eabi/bin/ld:
Click to expand...
Click to collapse
Are you using 32-bit linux system ?
If yes, then I guess 64-bit is necessary to get things compiled properly without errors.
NB: Just sharing info.
coolsandie said:
Are you using 32-bit linux system ?
If yes, then I guess 64-bit is necessary to get things compiled properly without errors.
NB: Just sharing info.
Click to expand...
Click to collapse
Thanks for the reply but I think that this kind of error is a missing reference for the function register_android_hardware_fm_fmradio that is called from AndroidRuntime.cpp
32 or 64 bit it is no differnce in compile result. just speed....
However I've checked tass configuration and I see that fm radio is set to BCM2049 chip.
I checkd into frameworks/base/core/jni/ cm source tree directory and I found only fm hardware reference for :
bcm4325
si4708
si4709
wl1271
now I'm trying to compile again setting radio to bcm4325 just to see if something appens...
P.S. should be nice to have some tecnical ideas about the code error not only if the host system is well configured
P.P.S. changed values to bcm4325 let me not face errors no more. Now I'm compiling!!!!
I have checked some github projects and I see that a lot of device as sgm with bcm2049 fm chipset set it to bcm4325. I see that just subskype change that value to bcm2049. Should be nice to have some tip and tricks from him to understand well the point of the situation
Now I have a signed zip to flash into my sgm.
It contains subskype cm7.2 tass device configuration and latest cm 7.2 sources update at 31-01-2012.
to check changes:
http://review.cyanogenmod.com/#q,status:open,n,z
It works!!! finally compiled and booting successfully.
Now I'm trying to study the best way to mantain this kind of project (it's first time for me in android dev and I just have an android device by november).
first at all I was thinking to add V6 supercharge by default. what do you think?
mebitek said:
It works!!! finally compiled and booting successfully.
Now I'm trying to study the best way to mantain this kind of project (it's first time for me in android dev and I just have an android device by november).
first at all I was thinking to add V6 supercharge by default. what do you think?
Click to expand...
Click to collapse
Great news. Glückwunsch (don't know the english word at the moment).
Supercharger would be possibly good. Subpsyke said something to it but i don't rember clearly.
Keep up your work.
Sent from my GT-S5570 using xda premium
mebitek said:
It works!!! finally compiled and booting successfully.
Now I'm trying to study the best way to mantain this kind of project (it's first time for me in android dev and I just have an android device by november).
first at all I was thinking to add V6 supercharge by default. what do you think?
Click to expand...
Click to collapse
No not add anything. It s better. Completely clean
Inviato dal mio GT-S5570 usando Tapatalk
mebitek said:
Thanks for the reply but I think that this kind of error is a missing reference for the function register_android_hardware_fm_fmradio that is called from AndroidRuntime.cpp
32 or 64 bit it is no differnce in compile result. just speed....
However I've checked tass configuration and I see that fm radio is set to BCM2049 chip.
I checkd into frameworks/base/core/jni/ cm source tree directory and I found only fm hardware reference for :
bcm4325
si4708
si4709
wl1271
now I'm trying to compile again setting radio to bcm4325 just to see if something appens...
P.S. should be nice to have some tecnical ideas about the code error not only if the host system is well configured
P.P.S. changed values to bcm4325 let me not face errors no more. Now I'm compiling!!!!
I have checked some github projects and I see that a lot of device as sgm with bcm2049 fm chipset set it to bcm4325. I see that just subskype change that value to bcm2049. Should be nice to have some tip and tricks from him to understand well the point of the situation
Click to expand...
Click to collapse
For the radio, I used my patch to add support for the bcm2xxx devices with proper seeking. It's on gerrit here: http://review.cyanogenmod.com/#change,10358
mebitek said:
It works!!! finally compiled and booting successfully.
Now I'm trying to study the best way to mantain this kind of project (it's first time for me in android dev and I just have an android device by november).
first at all I was thinking to add V6 supercharge by default. what do you think?
Click to expand...
Click to collapse
no no...no v6.
Just vanilla cm7...and thanks for the initiative and ABT!
dont add scripts..but maybe something from cm gerrit if u wish..but then it'll not be vanilla.
Hello everyone, I'm a noob that want try to learn something more about Android.
I'm trying to compile the Optimus-prime kernel of Demetris, but I'm stuck on an error during compile session.
My steps:
1) git init -u git://github.com/Ntemis/lge-kernel-p880
2) downloaded NDK from google http://dl.google.com/android/ndk/android-ndk-r9c-linux-x86.tar.bz2
(I'm using Slackware 14.1 32 bit)
3) I've used as baseconfig this one : cyanogenmod_x3_defconfig
4) then as toolchain :
Code:
export CROSS_COMPILE=~/ndk/toolchains/arm-linux-androideabi-4.6/prebuilt/linux-x86/bin/arm-linux-androideabi-
5)finally I did
Code:
make -j2 ARCH=arm SUBARCH=arm
Now the error:
Code:
CC arch/arm/mach-tegra/lge/x3/board-x3-i2c-dev.o
arch/arm/mach-tegra/lge/x3/board-x3-i2c-dev.c:58:27: fatal error: board-lge-nfc.h: No such file or directory
compilation terminated.
make[2]: *** [arch/arm/mach-tegra/lge/x3/board-x3-i2c-dev.o] Errore 1
make[1]: *** [arch/arm/mach-tegra/lge/x3] Errore 2
make: *** [arch/arm/mach-tegra] Errore 2
The include file board-lge-nfc.h is present in the same folder of board-x3-i2c-dev.c
Where is the error?
are you sure the cross compile path points to the correct directory?
try using doomlord toolchain, kernel compiling is quite tricky and most toolchains give errors
Poi se vuoi se ne parla in pvt
Rudjgaard said:
are you sure the cross compile path points to the correct directory?
try using doomlord toolchain, kernel compiling is quite tricky and most toolchains give errors
Poi se vuoi se ne parla in pvt
Click to expand...
Click to collapse
Hi,
I have only the official NDK on my machine. Anyway I'll try also that doomlord toolchain
Thx for the hint. :good:
I've tried DoomLord's toolchain,but I have the same problem.
So I've tried to download Iodak's sources and I'm been able to compile it without any problem.
Is there a problem with Optimus Prime sources?Is there some special trick?
Well, I've found a solution....
It looks like there is some problem with include path.I've moved the "board-lge-nfc.h" file inside the include folder in the main root of the kernel sources and it worked.
Now I'm stuck with tspdrv. Same story: missing files when they are there instead. I did the same trick with another include file and it worked again, but now I have other missing files.
I'm sure there is something wrong in my setup/sources ...
bilbo75 said:
Well, I've found a solution....
It looks like there is some problem with include path.I've moved the "board-lge-nfc.h" file inside the include folder in the main root of the kernel sources and it worked.
Now I'm stuck with tspdrv. Same story: missing files when they are there instead. I did the same trick with another include file and it worked again, but now I have other missing files.
I'm sure there is something wrong in my setup/sources ...
Click to expand...
Click to collapse
Simply just cherry-pick this commit and you'll be fine
https://github.com/laufersteppenwolf/lge-kernel-p880/commit/c2e57252398ded9520beb9382f538da53f9a0199
I think this will help you
https://github.com/iodak/LG_X3_P880_v20a/commit/6f2086454d537c6f49038f36d6eeddbe4adcd70a
Also look at other commits on this page when you get into problems.
https://github.com/iodak/LG_X3_P880_v20a/commits/master?page=9
Sent from my LG-P880 using xda app-developers app
Wow! Thanks you very much for your help guys! :highfive:
Now I have to study cherry-picking
bilbo75 said:
Wow! Thanks you very much for your help guys! :highfive:
Now I have to study cherry-picking
Click to expand...
Click to collapse
One of the best ( if not the best) git(hub) tuts on xda: http://forum.xda-developers.com/showthread.php?t=1877040
everything's covered, and even git noobs ( such as I am ) can easily understand it
You have to:
git fetch https://iodak/LG_X3_P880_20a
Then wait for a while
Then git cherry-pick 6f2086454d537c6f49038f36d6eeddbe4adcd70a
Commit that you want.
Sent from my LG-P880 using xda app-developers app
I'm amazed from your kindness guys!
A big thanks again! :victory:
Hi,
i have a Problem with building a Hammerhead Rom from AOSP.
Buildin otapackage went fine.
running: java -Xmx2048m -jar out/host/linux-x86/framework/signapk.jar -w build/target/product/security/testkey.x509.pem build/target/product/security/testkey.pk8 /tmp/tmpHi4Kxb out/target/product/hammerhead/aosp_hammerhead-ota-eng.androidenv.zip
done.
Click to expand...
Click to collapse
But if flash this zip with TWRP, my Nexus 5 stand still at Google boot logo.
how can I check what I have done wrong?
isRaZZe said:
Hi,
i have a Problem with building a Hammerhead Rom from AOSP.
Buildin otapackage went fine.
But if flash this zip with TWRP, my Nexus 5 stand still at Google boot logo.
how can I check what I have done wrong?
Click to expand...
Click to collapse
My guess would be that you are missing some (or all) proprietary vendor blobs.
upndwn4par said:
My guess would be that you are missing some (or all) proprietary vendor blobs.
Click to expand...
Click to collapse
Your right. Do you have a link for me where i get these vendor blobs and how to include them ?
isRaZZe said:
Your right. Do you have a link for me where i get these vendor blobs and how to include them ?
Click to expand...
Click to collapse
https://developers.google.com/android/nexus/drivers
Lethargy said:
https://developers.google.com/android/nexus/drivers
Click to expand...
Click to collapse
Thanks. :good:
How do i include them in a automatic process in building ?
isRaZZe said:
Thanks. :good:
How do i include them in a automatic process in building ?
Click to expand...
Click to collapse
You should check if the path on /device/lge/hammerhead/full_hammerhead.mk is correct
and if, when you extract the zip, the device-vendor.mk works....
btw, my advice is to use some working blobs like AOSPA or CM...some binaries aren't in the source zip
...You can check my source for have an idea...
Crostantin said:
You should check if the path on /device/lge/hammerhead/full_hammerhead.mk is correct
and if, when you extract the zip, the device-vendor.mk works....
btw, my advice is to use some working blobs like AOSPA or CM...some binaries aren't in the source zip
...You can check my source for have an idea...
Click to expand...
Click to collapse
This is considerably more complex than I had imagined before.
Can someone explain me in more detail as I insert the blobs and can build a functioning Images?
isRaZZe said:
This is considerably more complex than I had imagined before.
Can someone explain me in more detail as I insert the blobs and can build a functioning Images?
Click to expand...
Click to collapse
in my opinion, the best way is to clone this in your tree (or add it in a local_manifests)
https://github.com/ThankYouMario/proprietary_vendor_lge_hammerhead
and move files to this path: vendor/lge/hammerhead
then you should make this little modification:
https://github.com/BoostPop/android_device_lge_hammerhead/commit/616c559e9fcfbde0e4fb477c681bc36627d5eb00
Crostantin said:
in my opinion, the best way is to clone this in your tree (or add it in a local_manifests)
https://github.com/ThankYouMario/proprietary_vendor_lge_hammerhead
and move files to this path: vendor/lge/hammerhead
then you should make this little modification:
https://github.com/BoostPop/android_device_lge_hammerhead/commit/616c559e9fcfbde0e4fb477c681bc36627d5eb00
Click to expand...
Click to collapse
Thanks. Will try it this evening.
Another question i have...
My idea is to build my own AOSP-Rom with some little modifikation. One of these modifikation are to include the "Close all Tabs" in the system wide tab view.
Where i can find this Code ?
I need to understand first where the individual parts of code are and was hoping that some of you support.
But first I need an executable Rom.
Edit:
I had checkout from git and copy to working directory. Path is vendor/lge/hammerhead. edit full_hammerhead.mk and remove the line and add
$(call inherit-product-if-exists, vendor/lge/hammerhead/hammerhead-vendor.mk)
then:
source build/envsetup.sh .
lunch aosp_hammerhead-userdebug
make -j4 otapackage
end in error :
PRODUCT_COPY_FILES device/generic/goldfish/data/etc/apns-conf.xml:system/etc/apns-conf.xml ignored.
build/core/Makefile:34: warning: overriding commands for target `out/target/product/hammerhead/system/etc/permissions/android.software.live_wallpaper.xml'
build/core/base_rules.mk:550: warning: ignoring old commands for target `out/target/product/hammerhead/system/etc/permissions/android.software.live_wallpaper.xml'
build/core/Makefile:34: warning: overriding commands for target `out/target/product/hammerhead/system/lib/hw/gps.msm8974.so'
build/core/base_rules.mk:550: warning: ignoring old commands for target `out/target/product/hammerhead/system/lib/hw/gps.msm8974.so'
build/core/Makefile:34: warning: overriding commands for target `out/target/product/hammerhead/system/lib/libgps.utils.so'
build/core/base_rules.mk:550: warning: ignoring old commands for target `out/target/product/hammerhead/system/lib/libgps.utils.so'
build/core/Makefile:34: warning: overriding commands for target `out/target/product/hammerhead/system/lib/libloc_core.so'
build/core/base_rules.mk:550: warning: ignoring old commands for target `out/target/product/hammerhead/system/lib/libloc_core.so'
build/core/Makefile:34: warning: overriding commands for target `out/target/product/hammerhead/system/lib/libloc_eng.so'
build/core/base_rules.mk:550: warning: ignoring old commands for target `out/target/product/hammerhead/system/lib/libloc_eng.so'
build/core/Makefile:34: warning: overriding commands for target `out/target/product/hammerhead/system/lib/libmmcamera_interface.so'
build/core/base_rules.mk:550: warning: ignoring old commands for target `out/target/product/hammerhead/system/lib/libmmcamera_interface.so'
build/core/Makefile:34: warning: overriding commands for target `out/target/product/hammerhead/system/vendor/lib/mediadrm/libdrmclearkeyplugin.so'
build/core/base_rules.mk:550: warning: ignoring old commands for target `out/target/product/hammerhead/system/vendor/lib/mediadrm/libdrmclearkeyplugin.so'
No private recovery resources for TARGET_DEVICE hammerhead
build/core/tasks/vendor_module_check.mk:56: *** Error: Product "aosp_hammerhead" cannot have overlay in vendor tree: vendor/lge/hammerhead/overlay. Stop.
Click to expand...
Click to collapse
Edit2:
Problem solved. Add the repo over local_manifest solution and build succesful and rom flash&boot are okay.
before build i need to set PRODUCT_RESTRICT_VENDOR_FILES := false in full_hammerhead.
soo... next step is to add some tweaks. from cm source... also over manifest?
isRaZZe said:
soo... next step is to add some tweaks. from cm source... also over manifest?
Click to expand...
Click to collapse
IMO best way to add features to your own build is get to know how to cherry-pick.
Then how to deal with conflicts etc.
So best way is to check google "how to cherry-pick" , its really easy when you get it.
Then you check CM github the commits you need.
Sick1 said:
IMO best way to add features to your own build is get to know how to cherry-pick.
Then how to deal with conflicts etc.
So best way is to check google "how to cherry-pick" , its really easy when you get it.
Then you check CM github the commits you need.
Click to expand...
Click to collapse
I now have posited me with cherry pick apart. This works so far very good.Thanks for that tipp !
Now I am facing a problem. I want to integrate Koush superuser settings, but the patch from Koush for this is very old (cm10.1) and does not work with cm12. Does anyone have a link to a patch with which I can integrate superuser in the Settingsapp?
nobody?
isRaZZe said:
I now have posited me with cherry pick apart. This works so far very good.Thanks for that tipp !
Now I am facing a problem. I want to integrate Koush superuser settings, but the patch from Koush for this is very old (cm10.1) and does not work with cm12. Does anyone have a link to a patch with which I can integrate superuser in the Settingsapp?
Click to expand...
Click to collapse
isRaZZe said:
nobody?
Click to expand...
Click to collapse
Every question you have asked, and will ask in the future, has been asked and answered many times. Xda alone has many threads on building from source, so creating this thread was pointless.
Google is your friend. Search, read, learn.
Since you want to cherry-pick CM, then the CM github is a great place to start. But I'll give you a hint...CM doesn't use Koush's superuser anymore.
https://github.com/CyanogenMod
Hello guys ...
Can someone tell me the whole process to compile pure AOSP for hammerhead ?? .. How to extract d blobs and everything ..
It would be great if someone helps me
Hope someone helps ..
Thanx