I need you to help me.
I have Samsung Galaxy S6 At&t stopped working and it showing the boot loading and it repeats it over and over.
So I tried to flash rom on Odin and it did say it was pass but still have the same problem
does anyone have an idea of whats going on?.
thank you
You will need to explain more clearly the steps leading up to when the problem occurred.
There is not enough information in your post for anyone to understand what the cause of your issue might be.
AoN
anneoneamouse said:
You will need to explain more clearly the steps leading up to when the problem occurred.
There is not enough information in your post for anyone to understand what the cause of your issue might be.
AoN
Click to expand...
Click to collapse
The device just shutdown suddenly then I tried to start it but it showing the boot screen and keeps on doing it over and over
Related
hi everyone. i've been following the forum here for awhile and finally decided to root my brand new NC. i autorooted from 1.1. i saw some things weren't working so i quickly decided to unroot back to factory settings. i unrooted by unregistering the device and turning off the power 8 times. my NC boots up fine, but it gets stuck on the "Registering your Device" page and just remains there with the circle spinning. i think i left it there for more than 30 minutes and nothing happens. has anyone experienced this before? if so, how did you fix it? any help would be appreciated.
sorry if this topic has already been asked - i tried searching but didn't find anything on this specific issue. if there's already a thread, please feel free to share the link with me. thank you!
EDIT: really need some help here... i tried to fix it myself (i know i shouldn't have) and might have made it even worse. i tried to re-autoroot my NC but just completely failed. it was not loading anything anymore, so i tried to unroot again by powering off 8 times. when i restarted, everything looked normal, except the bootloader screen was not stock. it brought me back through the normal tutorial and same thing with it getting stuck on "registering your device". could someone please provide a thorough walkthrough on how to reset to factory settings? i'm seeing all these threads throwing around all these acronyms that i don't understand. seems like i need to try running some clockwork rom but not even sure how to do that. please help!!
Bump, i have just encountered this problem and i need help as well.
Update:
actually just figured it out and heres what fixed my problem, i wasn't doing the factory reset part only the 8 reboot interruptions.
hxxp://nookdevs.com/Flash_back_to_clean_stock_ROM
Thanks for your post, even though no one ever helped. I was having the same problem and doing a clear data/factory reset from Clockwork Recover booted from an SD card did the trick for me.
After upgrading the firmware successfully according to odin our P1010 wifi-only galaxy tabs are stuck in an infinite reboot sequence that happens so quickly that we cannot use our galaxy tabs for anything. Right before it reboots we are all getting:
"Process android.process.media stopped unexpectedly. Try again"
This occurs immediately after the upgrade when you are doing the initial setup of the device. It is rebooting about every 15-30 seconds.
Please help us. We can still download using odin but we do not have the stock firmware. Someone out there help please. We are all going absolutely bonkers insane. Thx.
Try this : http://forum.xda-developers.com/showthread.php?t=961732
bongski55 said:
Try this : http://forum.xda-developers.com/showthread.php?t=961732
Click to expand...
Click to collapse
Dont mean to be rude but i just read that whole thread and it has absolutely nothing to do with the problem we are having. not once in that thread is mentioned any problems after upgrading firmware. in fact the thread seems to be about the P1000 with only a small bit about the P1010 which is unrelated to our problem.
Does anyone else have a solution or anything helpful?
frootloops said:
Dont mean to be rude but i just read that whole thread and it has absolutely nothing to do with the problem we are having. not once in that thread is mentioned any problems after upgrading firmware. in fact the thread seems to be about the P1000 with only a small bit about the P1010 which is unrelated to our problem.
Does anyone else have a solution or anything helpful?
Click to expand...
Click to collapse
sorry for not explaining. I thought you might want to use/flash the particular p1010 firmware discussed in that thread instead of what you have right now so as to eliminate/erase your error/problem.
I don't have a p1010 so I cannot verify. Next time I will not respond anymore to avoid misunderstanding.
frootloops said:
Does anyone else have a solution or anything helpful?
Click to expand...
Click to collapse
Did you solve your problem?
andrewin said:
Did you solve your problem?
Click to expand...
Click to collapse
no, i just gave up. my tab has been sitting on my desk for like 3 months unused. i guess i'll try recharging it if i can find it buried under the pile of papers and giving it another attempt at finding a solution.
not going to hold my breath tho... since it appears to be impossible to find the official united states p1010 firmware or whatever u guys call it.
bongski55 said:
sorry for not explaining. I thought you might want to use/flash the particular p1010 firmware discussed in that thread instead of what you have right now so as to eliminate/erase your error/problem.
I don't have a p1010 so I cannot verify. Next time I will not respond anymore to avoid misunderstanding.
Click to expand...
Click to collapse
sorry, didn't mean to offend you. i am just so utterly miserable about this device. i was so excited to get it, then i read about updating to fix some speed issues and increase battery life so i followed the guide and so i have only been able to use my device a total of about 1 day in about 5 months. very frustrating.
also, i am deathly afraid of "just trying" to flash anything as i dont want to make my device even worse than it already is.
i'll tell u one thing, i will never ever ever ever buy another samsung product again. they so very clearly dont give a rat's a** about the suffering of their customers. it doesn't matter if we did this to ourselves, they should still help. it is a stupid software fix that costs them nothing. do they think if they dont help us we will break down and buy a second one? i dont f'ing think so.
I had the same problem once.
Maybe the files are not matching like .PIT with Modem or bootloader thats why it keeps on restarting.
You should reinstall .PIT file then install accurate PDA , CSC and MODEM files for your own region.
omr911 said:
You should reinstall .PIT file then install accurate PDA , CSC and MODEM files for your own region.
Click to expand...
Click to collapse
Yea, this is the problem. Cant get United States region files. That is the whole issue.
SOLVED !!!
if you are having the infinite reboot problem on your US galaxy tab gt-p1010 do this:
1. download this rom (it is the hong kong rom)
http://www.multiupload.com/KJO2KALU2O
password: nomoreuncheckedfirmwares
2. put your tab in download mode by holding down the volume down button first then press and hold the power button.
3. start odin3 version 1.7, plug your tab into your pc.
4. verify you have the yellow in the ID:COM area in odin then select the pit file, the csc file and the pda file (the only file remaining) and hit start.
5. wait patiently while it downloads everything and reboots.
note that it will start up in chinese or japanese (not sure which, guessing chinese). also note that i am using windows xp, probably works in 32-bit windows 7 but may have problems with 64-bit windows 7. not sure cause i have not tried it. seems that i read that though.
good luck !!!
thanks to stsights for the solution and waqypaqy for uploading the file to a more accessible site!!! you guys make me more happy than u can possibly know...
frootloops said:
Yea, this is the problem. Cant get United States region files. That is the whole issue.
Click to expand...
Click to collapse
If US firmware is not available then install European Firmware
NO NO NO
omr911 said:
If US firmware is not available then install European Firmware
Click to expand...
Click to collapse
NO NO NO!!! This is what got the problem started in the first place. do NOT install european firmware on a US galaxy tab P1010. That will land u in infinite reboot hell. just dont do it.
i have a problem. i try to post a picture but it seem like stuck when loading after cropping it.. any solution for this kind of problem? :crying::crying:
ItsMeAlan said:
i have a problem. i try to post a picture but it seem like stuck when loading after cropping it.. any solution for this kind of problem? :crying::crying:
Click to expand...
Click to collapse
Try following this link,
My Instagram app freezes while processing a photo.
Hope I Helped
mahithm said:
Try following this link,
Hope I Helped
Click to expand...
Click to collapse
it seem like not to be freeze, but it did not proceed to next stage and stop at loading... the loading keep repeating. i wait it so long but nothing happen
ItsMeAlan said:
it seem like not to be freeze, but it did not proceed to next stage and stop at loading... the loading keep repeating. i wait it so long but nothing happen
Click to expand...
Click to collapse
Sorry I don't use instagram, so can't suggest you any other solution. May be its a RAM problem. I'm sure other user will be more than happy to provide you with a solution to solve this problem
Hi everyone, I am new to this forum and if my post is posted on the wrong area, please feel free to move it (and I apologize for any inconvenience)
so back to the problem that I have encountered: my S5 cannot power off properly after flashing G900F. I have an ATT S5 and I used towelroot to root, install Safestrap and did all the backup, setup a new rom kind of stuff. After that, I flash G900F to my phone (with all those wipe done correctly). My phone works perfectly fine but when I try to turn off my phone, it will do all the work but keeps in a black screen with the two button lights on. When I tried to turn on my phone then, it would not do so, so I believe it hangs at that black screen.
Did anyone encounter this before and know a way out? Every help is appreciated and sorry again if this post is in the wrong area.
Pete
Its a bug with safestrap. There's currently no fix other then a battery pull.
Longcat14 said:
Its a bug with safestrap. There's currently no fix other then a battery pull.
Click to expand...
Click to collapse
Thank you so much for your reply,
If you don't mind, please help me out on another problem: after doing all the process, my phone could not connect to my home wifi. It always got stuck at the "obtaining IP" process, is there a way that I could fix it as well?
Thank you so much for helping out this new guy!:good:
sincera4565 said:
Thank you so much for your reply,
If you don't mind, please help me out on another problem: after doing all the process, my phone could not connect to my home wifi. It always got stuck at the "obtaining IP" process, is there a way that I could fix it as well?
Thank you so much for helping out this new guy!:good:
Click to expand...
Click to collapse
I'm really not sure there. No custom ROMs would let me use WiFi when I flashed them.
Questions and Help issues belong in Q&A and Help section...thanks!
Thread moved
Is there one?
An unfinished update bricked my Mini and it won't boot. I can get into recovery but factory reset doesn't work.
I contacted Jide but I have students coming to use the unit tomorrow and don't want to have to wait.
Any Ideas?
Unfortunately no help from Jide on this issue someone else had that happen and they were to send him a new box. They don't allow you to root so no one working on a custom recovery and or ROM.
I'm with the same problem too, and I am very disappointed, Jide don't help solve the problem, and also close my support request as solved without solve anything!
Anyone find a solution?
TadeuAraujo said:
I'm with the same problem too, and I am very disappointed, Jide don't help solve the problem, and also close my support request as solved without solve anything!
Anyone find a solution?
Click to expand...
Click to collapse
Hi,
I had the same problem but Jide were most helpful, first in trying to sort the problem and then when I pointed out that my mini was useless and wasn't there a stock ROM or something just to get it running again they sent me a Zip file that I could load from recovery which if you PM me I will gladly pass on.[email protected]
Edit I have added this edit to let everyone know that has got in touch with technical questions that I have no technical knowledge of the Mini I was just the one who was lucky enough to get the image file.
As I have not enough posts to put up a link to the file please only get in touch if all you need is the file and I will send you the link. Cheers