Database Develop

Help. My device is stuck on boot animation - cwm and twrp will not load

The title says it all.
I went ahead and tried to install Paranoid android RC2, I flash it then subsequently the GApps using TWRP. Now, the device is stuck forever in the boot animation and neither TWRP or CWM (installed with DualZRecovery) will work.
Is there any way by which I can somehow revert what has happened here? This has never happened to me before.
Needless to say if I can avoid having a $400 paperweight, I have sworn to never risk custom roms on my main phone again.

Just flash some kernel with recovery and restore your backup. If you don't have backup, download some of stock or custom roms and flash via Flashtool or recovery......or just use search function

kraseto said:
Just flash some kernel with recovery and restore your backup. If you don't have backup, download some of stock or custom roms and flash via Flashtool or recovery......or just use search function
Click to expand...
Click to collapse
As I said, the main problem is that for some ungodly reason CWM is not working despite the fact that it is what i used to flash PA into the phone in the first place. I have never had a case where CWM itself failed. I need to be in Fastboot mode for flashtool right?
Well the phone wont even go into recovery so im not sure how to get it into fastboot.

1. Download some of newest stock ftf and put it to firmware folder in Flashtool
2. Start Flashtool, press flash btn and pick stock rom
3. Press vol- and connect usb simultaneously and wait about 3 min.
That's it.
Your phone is brand new stock :good:

kraseto said:
1. Download some of newest stock ftf and put it to firmware folder in Flashtool
2. Start Flashtool, press flash btn and pick stock rom
3. Press vol- and connect usb simultaneously and wait about 3 min.
That's it.
Your phone is brand new stock :good:
Click to expand...
Click to collapse
Well I'd come to the same conclusions myself but I thank ye kind ser.

Did u unlock your bootloader when u flashing pa?
Sent from my C6603 using Tapatalk 2

secondkai said:
Did u unlock your bootloader when u flashing pa?
Sent from my C6603 using Tapatalk 2
Click to expand...
Click to collapse
I think it was because I forgot to wipe the dalvik cache after installation of the ROM - although why CWM itself stopped working I have no clue.

How did u unlock your bootloader? Flashing aosp base rom require u to unlocked your bootloader first bcos of the custom kernel..if u unlocked your bootloader, did u fastboot flash boot.img?
Sent from my C6603 using Tapatalk 2

STOCK ROM Lollipop 5.1.1 X510-D5110-L--20150805 FOR INFINIX HOT2 ANDROID ONE.

Code:
I am not responsible for any damage whatsoever that may occur
In following these instructions. I've tested it on infinix X510
And it worked for me. Be sure to follow the instructions
And let it be clear that you are doing it at your own risk
Many people have been asking about aa stock Rom for X510 infinix hot2
And some have even bricked the phone or having problems with OTA install
This will be very helpful....
Requirements:
Mediatek VCOM USB (preloader) driver
SP FLASH TOOL Click here for tutorial
Or here for the video tutorials SPFlash Tool Full video tutorials
DROID TOOL
ADB AND FAST BOOT
STOCK INFINIX ROM FOR X510 Click here Mega
Update! ANDROID ONE STOCK FIRMWARE 5.1.1 Fixed to enter recovery manually Click here to download (Mega)
If you want to flash custom recovery for infinix hot 2
Please Click herek
Before I proceed further, the first thing you must do
Is to back up your present Rom (100%) with Droid tool
And SP FLASH TOOL if you haven't bricked the phone yet.
THIS ROM CAN ONLY BE INSTALLED WITH SP FLASH TOOL
HOW TO INSTALL
First, you need a PC, Mediatek VCOM USB Drivers and SP Flash tool
Do a backup incase things go wrong
Download the stock Rom and extract the zip
Open the folder and check for MT6580_Android_scatter.txt (Infinix ROM scatter file has 23 partitions while Android one scatter file has 28 partitions, open with text editor and confirm before flashing)
Open SP FLASH TOOL as administrator
Click on scatter loading and load the scatter file above
Select download and choose sub options of download only or firmware upgrade from
The drop down option under the download had these following options:
Download only: use this option when you are flashing the same type of ROM that is in your phone. Use this option for also flashing recovery or if you want to flash select partitions only
Firmware upgrade: Use this option when you are about to a different ROM from the one in your phone e.g. if you're using Android one ROM and want to flash infinix ROM or vise versa. Note; to use firmware upgrade option, every partition must be selected. You can also use this option on partially bricked phones.
Format All and download: this option should only be used for fully bricked phones
Click on the download icon when you are ready
Power down your phone, connect quality usb chord to your phone first. Keep
The phone in a place where it won't shake. Connect it to your PC. If you correctly
INSTALLED Mediatek VCOM USB DRIVERS it will detect and install the ROM.
Developers needed
Developers are also needed to help out as all my efforts to port custom recovery
Have proved abortive as it seems that the recovery image is protected. I've attached all the image in the ROM so please use the image to see if you can unpack them and create a custom recovery at least.
ABOUT THE ROM
Please make sure that your phone model is X510 to avoid bricking your phone
The infinix Rom is more of AOSP than pure Google that came with my X510
It has more features than the out of Box Rom that came with my phone.
"Ok Google" doesn't work from from the home screen you have to tap the search
Bar and say OK Google.
It has better battery optimisation about 30-40%
It can work for any most African regions and beyond.
I've also added the Android one stock firmware in incase you want to go back to out of the box Google stock Android one firmware. This is necessary because it's from this stock firmware that you can update to Marshmallow 6.0 once the roll out starts for 2nd generation Android one phones
Credits:
Infinixmobility
@DR_MOOSAVI for SP FLASH TOOL Tutorial
Ahmed ElShaer for uploading the stock rom (all credit for the rom to him)

Feel free to ask your questions... ?☺

More screen shots of the Rom....

More screen shots

Can you port a custom recovery for this device please

cainwireshark said:
Can you port a custom recovery for this device please
Click to expand...
Click to collapse
Still working on that and as a new phone no much
Resources on the net for it and X510 still lacks
Developers. But as soon as I get a break through
I'll post it here.

Bolumstar said:
Still working on that and as a new phone no much
Resources on the net for it and X510 still lacks
Developers. But as soon as I get a break through
I'll post it here.
Click to expand...
Click to collapse
any breakthrough yet ?

cainwireshark said:
any breakthrough yet ?
Click to expand...
Click to collapse
I've been a bit busy on other things but still searching
For a way to get a custom recovery. The mail challenge
Is the fact that MTK Droid Tools (latest version) can not create a
Scatter file for this phone as MT6580 is not yet
Compatible with it. Am still working with the scatter
File from this Rom but haven't gotten the breakthrough
Yet.
Once I get a break through I'll upload it here.

My phone is stuck on booting screen
Please after upgrading the rom my hot 2 is stuck in booting screen please help

Qwame1 said:
Please after upgrading the rom my hot 2 is stuck in booting screen please help
Click to expand...
Click to collapse
Give me more details, you have to use download
First in SP flash tool not "firmware upgrade" but tell
Me the one you did first and all the steps you took

My phone is stuck on booting screen
OK it finally worked nice rom tho thanks
should i update it?

Qwame1 said:
OK it finally worked nice rom tho thanks
should i update it?
Click to expand...
Click to collapse
TheThere update makes even better...
Data upload and download bar for data
Connection in but mobile and WiFi network connection
And lots more
Do hit the ? Thanks button below if I helped....

Thanks soo much
Thanks bro ur rom rocks :good::good:
But can u create a custom recorvery

Qwame1 said:
Thanks bro ur rom rocks :good::good:
But can u create a custom recorvery
Click to expand...
Click to collapse
Still working on that and once I get a break through
I'll post it here, stay tuned!

Bolumstar said:
I've been a bit busy on other things but still searching
For a way to get a custom recovery. The mail challenge
Is the fact that MTK Droid Tools (latest version) can not create a
Scatter file for this phone as MT6580 is not yet
Compatible with it. Am still working with the scatter
File from this Rom but haven't gotten the breakthrough
Yet.
Once I get a break through I'll upload it here.
Click to expand...
Click to collapse
I have a weird problem with Infinix Hot 2 the phone after installing the ROM on infinix website the Android one ROM the volume buttons not working in the bootloader that' only mean the device can only boot normally and can't boot into recovery or bootloader using buttons

D3VI0US said:
I have a weird problem with Infinix Hot 2 the phone after installing the ROM on infinix website the Android one ROM the volume buttons not working in the bootloader that' only mean the device can only boot normally and can't boot into recovery or bootloader using buttons
Click to expand...
Click to collapse
Make sure you closed the back casing well.
Reflash the rom with the newest version of SP FLASH TOOL
Reflash it using "firmware upgrade"
If the problem persists, reinstall VCOM USB Drivers
Try another port/usb cable
And make sure the phone don't even shake while
Flashing

Bolumstar said:
Make sure you closed the back casing well.
Reflash the rom with the newest version of SP FLASH TOOL
Reflash it using "firmware upgrade"
If the problem persists, reinstall VCOM USB Drivers
Try another port/usb cable
And make sure the phone don't even shake while
Flashing
Click to expand...
Click to collapse
the phone is working normally and volume button is working in the normal mode as a volume button and I tried everything still couldn't get to boot into recovery from the buttons
I have to use adb reboot recovery from PC
one thing is interesting enough is if I flash the infinix skinned ROM not the stock Android one I can boot in recovery using power+volume up but still I can't boot into bootloader
It's most probably the ROM but which part of the ROM is broken I don't know

D3VI0US said:
the phone is working normally and volume button is working in the normal mode as a volume button and I tried everything still couldn't get to boot into recovery from the buttons
I have to use adb reboot recovery from PC
one thing is interesting enough is if I flash the infinix skinned ROM not the stock Android one I can boot in recovery using power+volume up but still I can't boot into bootloader
It's most probably the ROM but which part of the ROM is broken I don't know
Click to expand...
Click to collapse
I just flashed the AndroidOne stock Rom yesterday to
Test out somethings but I've gone back to this
Rom (Infinix 5.1) unfortunately I didn't test going into
Recovery.
As par where the problem is coming from,
It should be between preloader and recovery2

D3VI0US said:
the phone is working normally and volume button is working in the normal mode as a volume button and I tried everything still couldn't get to boot into recovery from the buttons
I have to use adb reboot recovery from PC
one thing is interesting enough is if I flash the infinix skinned ROM not the stock Android one I can boot in recovery using power+volume up but still I can't boot into bootloader
It's most probably the ROM but which part of the ROM is broken I don't know
Click to expand...
Click to collapse
I just flashed the AndroidOne stock Rom yesterday to
Test out somethings but I've gone back to this
Rom (Infinix 5.1) unfortunately I didn't test going into
Recovery.
As par where the problem is coming from,
It should be between preloader and recovery2
Try reflashing the Rom again with firmware upgrade
If problem persists, try downloading from this
Link
https://mega.nz/#!gBd2GRQY!JmWPHeMDBrGCg5TvcJeXuXl9OAw_lUZRhJ00OHOznqY

Bolumstar said:
I just flashed the AndroidOne stock Rom yesterday to
Test out somethings but I've gone back to this
Rom (Infinix 5.1) unfortunately I didn't test going into
Recovery.
As par where the problem is coming from,
It should be between preloader and recovery2
Try reflashing the Rom again with firmware upgrade
If problem persists, try downloading from this
Link
https://mega.nz/#!gBd2GRQY!JmWPHeMDBrGCg5TvcJeXuXl9OAw_lUZRhJ00OHOznqY
Click to expand...
Click to collapse
That's the same link from Infinix website and that's the only ROM available for Android one. and since we can't create a scatter file from a fully working device so we won't be able to extract the preloader and flash it on any other phone .. by the way if you have the phone is yours booting into recovery and bootloader using buttons ?

Bricked device Urgent

I unlocked boot loader and downloaded rom to flash,extracted rom and flashed boot.img from zip via flash tool,now phone cant boot,only black screen,i cant turn it off to get to flash mode please help

i didint gived any picture only black screen,i tried 100x and i dont know how it gone to flash mode and i flashed stock ftf
Its booting now,i hope it will work
please tell me how to install cm12.1 i tried many tutorials but no succes and now i bricked device

Nikola_98 said:
i didint gived any picture only black screen,i tried 100x and i dont know how it gone to flash mode and i flashed stock ftf
Its booting now,i hope it will work
please tell me how to install cm12.1 i tried many tutorials but no succes and now i bricked device
Click to expand...
Click to collapse
So, is it working or not?
If yes, please flash the stock 5.0.2. Install Xperia Z dual recovery, there is a script that installs dual recovery with just one click. Just connect the device on the pc, enable developer options, enable usb debug and allow to do its thing.
When running the script select option 3, 5.0.2 without root.
After you install the recovery, you can flash any rom you want from there, just make sure to do the correct wiping before and after. happy flashing

Its working now,is there tutorial for flashing recovery

Nikola_98 said:
Its working now,is there tutorial for flashing recovery
Click to expand...
Click to collapse
Could not find any tutorial, here is the manual though : http://nut.xperia-files.com/html/xzdualrecovery-manual.html
Anyway you can follow these simple steps:
1. Flash stock 5.0.2 ftf
2. After phone boots, enable Developer Options and from there enable USB debug
3. Connect phone to PC.
4. Assuming you have Windows, Download the Recovery installation Tool here: http://nut.xperia-files.com/?ql=ef9a86aff9041bf1734fc9e3afe75f084d655774
5. Extract, hit the Installer and just follow the instructions from there.
For more info check the official thread about XZ Dual Recovery here: http://forum.xda-developers.com/showthread.php?t=2261606
If you need help ask, but make sure you quote me so I can get a notification.

Thank you for help
is there any way to flashcm12.1 with its recovery?
Or can i flash cm recovery img with flashtool and flash cm from that recovery?

Nikola_98 said:
Thank you for help
is there any way to flashcm12.1 with its recovery?
Or can i flash cm recovery img with flashtool and flash cm from that recovery?
Click to expand...
Click to collapse
I cannot see any official CM builds, if you like any Rom in the forum, please write to that thread because I'm not really sure.
If you want to experiment, you can! Because if anything goes wrong you can always use flashtool

I saw some builds on cm website,is that official?

Nikola_98 said:
I saw some builds on cm website,is that official?
Click to expand...
Click to collapse
Yes, there are official builds but those are Nightly - which means they're not ready yet for everyday use but only as test versions.
You will not have a fully functional phone because there might be many bugs in those Roms.
Here is a Rom I personally use and find very nice: http://forum.xda-developers.com/xperia-z/development/rom-official-sony-lollipop-5-1-1-t3196237

Thank you !

Have TWRP installed on Note 5 DUOS SM-N9208 but phone only boots to android recovery?

I was trying to install TWRP on my Note 5 using odin and everything worked perfectly. I even got the green "PASS" icon. But when it rebooted, I turned off the phone to boot into TWRP using Home+Power+Vol Up, and I got a installing system updates icon, then a fallen android bot with a yellow cross sign on top, and then it loaded into default android recovery, not TWRP. Any and all help is greatly appreciated. Thank you very much!!

This happend to me too. What you need to do is to flash a custom kernel for your device because you installed a custom recovery and what happens is that that the stock kernel stops working or it gets erased, but the fix for the problem is flashing a custom kernel.

Luis_0 said:
This happend to me too. What you need to do is to flash a custom kernel for your device because you installed a custom recovery and what happens is that that the stock kernel stops working or it gets erased, but the fix for the problem is flashing a custom kernel.
Click to expand...
Click to collapse
Thank you for the reply. I'm new to the rooting scene so by kernel you mean one of those auto root kernels you can flash through Odin?
Sent from my SM-N9208 using XDA-Developers mobile app

PatelCartel said:
Thank you for the reply. I'm new to the rooting scene so by kernel you mean one of those auto root kernels you can flash through Odin?
Sent from my SM-N9208 using XDA-Developers mobile app
Click to expand...
Click to collapse
What version of android you are running? Lollipop or Marshmallow?
by the way go to this link, it'll help you
http://forum.xda-developers.com/not...nel-nobleltehk-n9200-root-permissive-t3221777

Luis_0 said:
What version of android you are running? Lollipop or Marshmallow?
by the way go to this link, it'll help you
http://forum.xda-developers.com/not...nel-nobleltehk-n9200-root-permissive-t3221777
Click to expand...
Click to collapse
I'm running marshmallow 6.0.1
Sent from my SM-N9208 using XDA-Developers mobile app

PatelCartel said:
I'm running marshmallow 6.0.1
Sent from my SM-N9208 using XDA-Developers mobile app
Click to expand...
Click to collapse
well in that case flash this kernel with the custom recovery you installed
http://forum.xda-developers.com/note5/orig-development/kernel-n9208-ubertc-5-3-5-17-2016-t3381233

Luis_0 said:
well in that case flash this kernel with the custom recovery you installed
http://forum.xda-developers.com/note5/orig-development/kernel-n9208-ubertc-5-3-5-17-2016-t3381233
Click to expand...
Click to collapse
I can't flash it through custom recovery because I can't get to it

But before you flash the TWRP again to your device and the kernel you need to download the official firmware for your Note 5 because it seems that you messed up real bad with you phone.
Just google official firmware N9208 and download it to then flash it through ODIN in download mode, then after installing the Firmware boot up the phone and set it up, after that you go to Developers Mode and enable OEM and USB Debugging, after that you download the kernel i provided above for your N9208 IN YOUR PHONE. Afterwards, go to Download Mode and flash TWRP through ODIN in your phone and then boot up the recovery and flash the kernel that is in thr internal storage of your phone in the Download folder. Now the phone should br rooted. If you still didn't understand the instructions then look up this video https://youtu.be/We6OUJvzve0
hope it works for you ?

Luis_0 said:
But before you flash the TWRP again to your device and the kernel you need to download the official firmware for your Note 5 because it seems that you messed up real bad with you phone.
Just google official firmware N9208 and download it to then flash it through ODIN in download mode, then after installing the Firmware boot up the phone and set it up, after that you go to Developers Mode and enable OEM and USB Debugging, after that you download the kernel i provided above for your N9208 IN YOUR PHONE. Afterwards, go to Download Mode and flash TWRP through ODIN in your phone and then boot up the recovery and flash the kernel that is in thr internal storage of your phone in the Download folder. Now the phone should br rooted. If you still didn't understand the instructions then look up this video https://youtu.be/We6OUJvzve0
hope it works for you ��
Click to expand...
Click to collapse
Thank you SO much for that detailed reply. I understand the instructions but is it alright if instead of flashing a stock firmware I just factory reset my phone?

PatelCartel said:
Thank you SO much for that detailed reply. I understand the instructions but is it alright if instead of flashing a stock firmware I just factory reset my phone?
Click to expand...
Click to collapse
You could give it a try if it works...

Stucked in recovery mode (TWRP-Lenovo a7000)

after installing custom rom using twrp , the phone always reboots into recovery mode, i tried several times either i removed the battery or i have flashed the rom again but no use , it always reboots into recovery only ,can anyone help me with this plzzz

Mohan Sai said:
after installing custom rom using twrp , the phone always reboots into recovery mode, i tried several times either i removed the battery or i have flashed the rom again but no use , it always reboots into recovery only ,can anyone help me with this plzzz
Click to expand...
Click to collapse
I have solved problem by installing Stock ROM (Marshmallow) using "SP-Flash Tools" ,U can use lollipop also at your wish , after installing stock rom the TWRP will be no more, so if u want to install any custom rom u have to flash TWRP again , and u can install any rom of ur wish
THANK YOU:fingers-crossed:

same here
I also struck in twrp recovery mode and unable to boot from there to system and I m using Sony xperia z so plz help by giving complete details how you have done .

yuvrajaryans said:
I also struck in twrp recovery mode and unable to boot from there to system and I m using Sony xperia z so plz help by giving complete details how you have done .
Click to expand...
Click to collapse
For our device
https://forum.xda-developers.com/le...lashing-stock-rom-via-sp-flash-t3364235/page1
Please refer to that it may help you:good:

Mohan Sai said:
I have solved problem by installing Stock ROM (Marshmallow) using "SP-Flash Tools" ,U can use lollipop also at your wish , after installing stock rom the TWRP will be no more, so if u want to install any custom rom u have to flash TWRP again , and u can install any rom of ur wish
THANK YOU:fingers-crossed:
Click to expand...
Click to collapse
Lol.
If you just uncheck the "recovery" option in spft, then TWRP will remain undisturbed.
And BTW, the rom rebooting to recovery is a problem either in the flashing by the recovery, or by bad rom.

Mohan Sai said:
For our device
https://forum.xda-developers.com/le...lashing-stock-rom-via-sp-flash-t3364235/page1
Please refer to that it may help you:good:[/QU
OTE]
thanks for the help .
problem resolved .
I flash firmware using flash tool.
Click to expand...
Click to collapse

failed to update and stuck
i tried updating my lenovo a7000 with marshmellow but it failed and now every time i attach usb cable it restarts and goes into recovery thus i cant use sp flash tool too to flash any rom.also cant enable usb debugging as phone keeps restarting into recovery.plzzz hlpp

ajitab2628 said:
i tried updating my lenovo a7000 with marshmellow but it failed and now every time i attach usb cable it restarts and goes into recovery thus i cant use sp flash tool too to flash any rom.also cant enable usb debugging as phone keeps restarting into recovery.plzzz hlpp
Click to expand...
Click to collapse
You have stock recovery?

Yes I have stock recovery and have never rooted this device and is as it is factory made

i'm stuck in twrp recovery plz help
Mohan Sai said:
after installing custom rom using twrp , the phone always reboots into recovery mode, i tried several times either i removed the battery or i have flashed the rom again but no use , it always reboots into recovery only ,can anyone help me with this plzzz
Click to expand...
Click to collapse
i'm stuck in twrp recovery plz help me out. i'm new to this i flashed the lineageOS.

If you can’t find any other way, then try installing stock rom using sp flash tools, most probably this will solve the issue.

Thank you for the reply but.
Mohan Sai said:
If you can’t find any other way, then try installing stock rom using sp flash tools, most probably this will solve the issue.
Click to expand...
Click to collapse
yar @Mohan Sai tu life saver hai (hope you understand), it worked like a charm.