Hi Guys,
I was trying to update my N920G(INDIA) stock firmware from N920GDDU2AOL1 (india) to N920GUBU2AOJ8 (Ecuador) but at the end in odin 3.10.7 the firmware update failed. Now if i try to start the device I am getting an error message saying "Use the emergency recovery function in the Smart Switch PC software" but If i connect my device with Smart Switch PC software it shows that the device is unsupported .
What should I do?
PS: I am still able to go into the download mode
splurge_in said:
Hi Guys,
I was trying to update my N920G(INDIA) stock firmware from N920GDDU2AOL1 (india) to N920GUBU2AOJ8 (Ecuador) but at the end in odin 3.10.7 the firmware update failed. Now if i try to start the device I am getting an error message saying "Use the emergency recovery function in the Smart Switch PC software" but If i connect my device with Smart Switch PC software it shows that the device is unsupported .
What should I do?
PS: I am still able to go into the download mode
Click to expand...
Click to collapse
Do not worry
run on pc kies and plug in with usb cable
The Kies software will recover .
splurge_in said:
Hi Guys,
I was trying to update my N920G(INDIA) stock firmware from N920GDDU2AOL1 (india) to N920GUBU2AOJ8 (Ecuador) but at the end in odin 3.10.7 the firmware update failed. Now if i try to start the device I am getting an error message saying "Use the emergency recovery function in the Smart Switch PC software" but If i connect my device with Smart Switch PC software it shows that the device is unsupported .
What should I do?
PS: I am still able to go into the download mode
Click to expand...
Click to collapse
hi ,
most probably the reason Smart Switch is not working, is that you are "rooted " ?
Have you tried flashing the latest correct stock Rom of you device ,
not just any old Rom etc
(Reasons /think in terms of .. old /updated boot-loader etc )
ismailykr said:
Do not worry
run on pc kies and plug in with usb cable
The Kies software will recover .
Click to expand...
Click to collapse
hi ,
as far as i know Kies does not "work " on Note5
You have to use Smart Switch .
See screenshot what happens if you try to connect to Kies .
(i have N920 C in this case )
Further ,Smart Switch most probably only works on non rooted devices etc and not on rooted /modify devices .I might be wrong ,but this is what my understanding of Smart Switch .
good luck
Have you tried flashing back to stock OL1
Have you solved this problem? I have the same and neither smartswitch nor kies nor odin works. Please HELP!!!
Related
hey guys, i connect my phone to kies my phone successfully connected and i can do all of the function eg back up restore etc. but what bother me the most it that kies could not detect the version of my firmware. because it cant dtect my firmware , i cant update my phone. pls advice.
Can it not show the update page via the firmware update button .
Have you set your phone to KIES mode .
What update do you think you have .
jje
THIS PROBLEM IS SOLVED!
Hi, I am using JPO version of Germany (DBT) for I9000 international. When I connect device to computer, update notification appears for 2.2.1. However, when I click on update after skipping or non-skipping backup, device disconnects and notification appears that device not connected. Then, clicking on OK update process ends but my galaxy s is connected to KIES. I tried numerous times and I am waiting for someone who overcame this problem.
full error message: Firmware update stopped because GT-I9000 has been disconnected. Please check the connection and try again.
I tried those:
Updating KIES
Hard reset device
Uninstall & reinstall KIES
Open KIES as admin
Open KIES in compatibility mode
Restart phone
I also tried Win7 32 bit,XP and XP virtual PC
Solution is in http://forum.xda-developers.com/showthread.php?t=997974
have you tried it on another computer?
If that does not work you can always download the version you need and flash it yourself through odin. As long as it's a stock rom it shouldn't even compromise your warranty
EDIT:
But first try the other computer, if it does not work on any other machine you can also suspect faulty hardware and just send it to samsung / bring it to your carrier. I think they will investigate and update it for you.
theduckking said:
have you tried it on another computer?
If that does not work you can always download the version you need and flash it yourself through odin. As long as it's a stock rom it shouldn't even compromise your warranty
EDIT:
But first try the other computer, if it does not work on any other machine you can also suspect faulty hardware and just send it to samsung / bring it to your carrier. I think they will investigate and update it for you.
Click to expand...
Click to collapse
I managed to understand problem thanks to you but I can not figure out a solution. You are correct that my phone connects and synchronizes great normally but it does not connect to KIES in download mode.
maybe kies does not recognize in download mode...so u can choose alternative of flashin with odin..its easy and fast =)
Lavius said:
maybe kies does not recognize in download mode...so u can choose alternative of flashin with odin..its easy and fast =)
Click to expand...
Click to collapse
I am afraid that I had a bad experince with Odin. My phone connected to Odin. When I clicked start, nothing happened. After half and hour I unplugged, I saw a phone, a cable and a computer on screen. After that, I updated to Froyo using KIES, that is why I am not a fan of ODIN
Solution is there:
http://forum.xda-developers.com/showthread.php?t=997974
hello guys
i was installing a rom on my GT-N7000 ,after finishing my phone showed The “Firmware upgrade encountered an issue, Please select recovery mode in Kies & Try Again”
i said ok lets look for a solution, i found several posts saying that i need to do an emergency recovery from kies
but kies doesn’t recognize my phone it says "device is not responding ,reboot "
i tried to install stock rom using odin but my phone won't boot into Download mood it is freezing at the screen above
so what should i do ? throw my phone from the nearest window ?
Omar42Nabil said:
hello guys
i was installing a rom on my GT-N7000 ,after finishing my phone showed The “Firmware upgrade encountered an issue, Please select recovery mode in Kies & Try Again”
i said ok lets look for a solution, i found several posts saying that i need to do an emergency recovery from kies
but kies doesn’t recognize my phone it says "device is not responding ,reboot "
i tried to install stock rom using odin but my phone won't boot into Download mood it is freezing at the screen above
so what should i do ? throw my phone from the nearest window ?
Click to expand...
Click to collapse
Did u install the samsung's latest drivers on ur PC?
tra_dax
tra_dax said:
Did u install the samsung's latest drivers on ur PC?
tra_dax
Click to expand...
Click to collapse
is there an official site i can download it from ?!
Omar42Nabil said:
is there an official site i can download it from ?!
Click to expand...
Click to collapse
Try this one:
http://forum.xda-developers.com/showthread.php?t=1755001
v1.5.22.0
I would suggest u to use Odin instead of Samsung kies.
tra_dax
tra_dax said:
Try this one:
http://forum.xda-developers.com/showthread.php?t=1755001
v1.5.22.0
I would suggest u to use Odin instead of Samsung kies.
tra_dax[/QUOTE
Click to expand...
Click to collapse
tra_dax said:
Try this one:
http://forum.xda-developers.com/showthread.php?t=1755001
v1.5.22.0
I would suggest u to use Odin instead of Samsung kies.
tra_dax
Click to expand...
Click to collapse
it won't boot into download mood is it ok to use odin when showing this message on mobile screen firmware upgrade encoutered an issue ??
Remove the battery for 30 secs and then try by pressing the power volume down and home.
[Solved]
i connected my phone to my pc with different USB cable and odin was able to recognize it even when showing this mobile cpmputer screen which says ' firmware upgrade encounterd ..... " the i flashed "PhilZ-cwm6-JPLSB-UAE-4.93.6.tar"
using odin and whithout download mode
and it all fine now after flshing the stock rom back
thnx for all who replyed
I have tab 2, i was trying to install firmware but die to some issues had to remove usb from system. Now it is showing firmware upgrade encountered an error try connecting to kies... And odin recognises it but i can flash stock firmware again plz help
xyzabc123456789 said:
I have tab 2, i was trying to install firmware but die to some issues had to remove usb from system. Now it is showing firmware upgrade encountered an error try connecting to kies... And odin recognises it but i can flash stock firmware again plz help
Click to expand...
Click to collapse
Very similar situation with mine. However Odin won't operate on my Windows 7 Computers and the Tab won't accept anything from either the Computer, SdCards or any other way. Even when I can access firmware according to the Boot Mode Screen. I'm stuck as well. But hope you solve your problem...
Today i was updating my s10 exynos and during the flashing via odin i accidentaly disconnected the cable and the proccess failed
after i got an exclamation mark erros saying "an error has occurred while updating the device software. Use the emergency recovery function in the smart switch pc software"
I tried using this but nothing happend ( i tried reinstalling the device drivers).
plss help
https://snipboard.io/QYI0t7.jpg
https://snipboard.io/FHUouS.jpg
edit vol1 : i have the solution simply use odin to flash
How did you get into download mode? I have the same error and cannot get into the download mode
Edit: I fixed with my Z3x Samsung Tool Pro Box