Hi everyone. I have this problem: When I change system apps (SystemUI, SecSettungs, LegacyInCallUI and others) on my G800H 5.1.1 Lollipop framework, system works properly. But when I change framework-res, system starts up and goes to reboot. Any ideas?
P.S. Sorry for my English
Can anyone help me please?
Hello, I have a question and I think it can remove it here. When a ROM is installed, whichever it is absolutely supersedes all? That is, it replaces all that can be seen from the TWRP?
rodrycapo07 said:
Hello, I have a question and I think it can remove it here. When a ROM is installed, whichever it is absolutely supersedes all? That is, it replaces all that can be seen from the TWRP?
Click to expand...
Click to collapse
ROM installed in September 2015 (when it's realised). Rooted, TWPR 2.8
Hello, I am not referring to when (date) to install the ROM. I meant when installing a ROM, replaced everything that can be seen in the recovery?
I will not give a solution. I'm with a doubt and I think you can help
OK, problem solved. I deodexed my firmware, and now it runs normal with edited framework-res
rodrycapo07 said:
replaced everything that can be seen in the recovery?
Click to expand...
Click to collapse
I don't understand you man, what do you mean?
Related
Just what it says, flash this from custom recovery, and it will deodex your phone, and the font files are included for any theme designers.
WHAT DOES DOEDEX MEAN OR DOES? dO i NEED IT IT ON MY ALREADY rom'D PHONE?
Omnichron said:
WHAT DOES DOEDEX MEAN OR DOES? dO i NEED IT IT ON MY ALREADY rom'D PHONE?
Click to expand...
Click to collapse
If you already have a rom, it's probably deodexed...it enables themes to be used on the phone.
Joeseph Mother said:
If you already have a rom, it's probably deodexed...it enables themes to be used on the phone.
Click to expand...
Click to collapse
unless you have the original rom, rooted it and installed custom recovery.
@ts
can explain what the update.zip actually does? ill look into it myself but probably when i have more time.
Too bad doesn't work
Hello, I am brand new to rooting. This is the first phone I have rooted. I am trying to improve its performance and and possibly change the boot animation and stuff. I used rom toolbox but it wouldn't change my boot. And all overclocking apps cqn only underclock it. Does anyone know if it cqn be overclocked? And how to change the boot animation? I already improved space using gl to sd, but I haven't found any forums on overclocking qnd and boot animation. Please help this noob. And thank you
You can use Boot Box (look it up on Google Play) to change your boot animation. To overclock your CPU, you're going to need a supported kernel, which isn't available at the moment. Overclocking won't be possible on your device unless someone releases a kernel which supports it.
By the way, you have posted this thread in the wrong forum section.
GXGOW said:
You can use Boot Box (look it up on Google Play) to change your boot animation. To overclock your CPU, you're going to need a supported kernel, which isn't available at the moment. Overclocking won't be possible on your device unless someone releases a kernel which supports it.
By the way, you have posted this thread in the wrong forum section.
Click to expand...
Click to collapse
Oh, im sorry, where would I post this? And thank you btw
boot box isn't working. Do you kbow the correct install locarion? I didn't doanything tothe rom. It's metro pcs t599n
coocoocahoo said:
boot box isn't working. Do you kbow the correct install locarion? I didn't doanything tothe rom. It's metro pcs t599n
Click to expand...
Click to collapse
The device is already rooted, right? Are you still using the stock Samsung ROM?
GXGOW said:
The device is already rooted, right? Are you still using the stock Samsung ROM?
Click to expand...
Click to collapse
Yes, the device is rooted, I have supersu enabled. And my device is currently stock rom. However I can't seem to change much. I tried to change the notification background using rom toolbox and that also didn't work. It seems as though my Device uses qmg files
coocoocahoo said:
Yes, the device is rooted, I have supersu enabled. And my device is currently stock rom. However I can't seem to change much. I tried to change the notification background using rom toolbox and that also didn't work. It seems as though my Device uses qmg files
Click to expand...
Click to collapse
If you are rooted, then install xposed framework & modules. It's the best way to customize. Use the search bar to find them.
mauam said:
If you are rooted, then install xposed framework & modules. It's the best way to customize. Use the search bar to find them.
Click to expand...
Click to collapse
Most of the mods are for 4.2 and 4.3. I have 4.1.2. It's still jellybean., but will it work on these mods? I don't to end up with a bricked phone.
coocoocahoo said:
Most of the mods are for 4.2 and 4.3. I have 4.1.2. It's still jellybean., but will it work on these mods? I don't to end up with a bricked phone.
Click to expand...
Click to collapse
Of course not. If it says 4.2, it's for 4.2 (always read the OP carefully) & so on. If you know what you're doing, you won't brick your phone, for sure
Here you go guys and gals, working TWRP, you can thank alybhamani over at the MIUI forums.
http://en.miui.com/thread-118114-1-1.html
Or directly by: https://mega.co.nz/#!d0cFFCLZ!tZN38HAzpIKQXbsRkwVJBkyGr5f1OUPaIZkxt3Bfiak
Installed and working fine, thank you!
Many thanks , work fine also for me .
great work love it
the link is dead can anyone upload it again
thanks.
k2009 said:
the link is dead can anyone upload it again
thanks.
Click to expand...
Click to collapse
https://mega.nz/#!q40WWSIB!tZN38HAzpIKQXbsRkwVJBkyGr5f1OUPaIZkxt3Bfiak
zozyk said:
https://mega.nz/#!q40WWSIB!tZN38HAzpIKQXbsRkwVJBkyGr5f1OUPaIZkxt3Bfiak
Click to expand...
Click to collapse
thank you
I heard about a modded MiRecovery that accepts unofficial ROMs to flash. Any experiences about that one?
going to try it now.
So it works fine but have rename everything to "update.zip" and place on root of storage. It's not got options to wipe cache without doing complete wipe although can be done from new cooking of rom options.
Anyone can help me?
I decompiled existing TWRP for Leo, using Android Kitchen, to change the theme to Material, then I repacked it and I flashed the customized TWRP with Flashify. Anything goes okay, it started into the Materialized TWRP but when I tap on "Theme" the Mi Note Pro reboot to System.
Is there anyone who can create or help me to create a TWRP with Materialized theme already applied?
I have another question: I know it's possible to apply a theme by creating "TWRP/theme" folder that contains the theme, but what if I delete that folder? Is there anyway to apply the theme directly into Recovery partition?
Thank you, I wish you can help me.
TWRP 2.8.6.0 Improved English Version with Materialised Play Theme 2.8.7.X
xazac said:
Anyone can help me?
I decompiled existing TWRP for Leo, using Android Kitchen, to change the theme to Material, then I repacked it and I flashed the customized TWRP with Flashify. [...] when I tap on "Theme" the Mi Note Pro reboot to System. Is there anyone who can create or help me to create a TWRP with Materialized theme already applied?
Click to expand...
Click to collapse
Feel free to try the version I posted here, which works fine for me.
Aqq123 said:
Feel free to try the version I posted here, which works fine for me.
Click to expand...
Click to collapse
Thank you man! Does it work fine?
Thank you!
PS: can I flash it with Flashify?
xazac said:
can I flash it with Flashify?
Click to expand...
Click to collapse
I've never tried that as I don't use Flashify but I guess so. Anything that works for some other image should also work with this image.
xazac said:
Does it work fine?
Click to expand...
Click to collapse
It works fine for me, except the following two issues mentioned in the original post:
Aqq123 said:
Sometimes the screen might be difficult to unlock because the swipes need to be very precise for them to register. I recommend to disable the screen timeout in the TWRP settings once in the recovery mode.
Wiping all partitions by formatting them appears to be introducing some problem, probably due to fstab discrepancies. Consider changing the relevant setting to use rm -rf for wiping if you plan to use this function.
Click to expand...
Click to collapse
Note that my bootloader has never been locked, so I have no idea how this would work with the recent changes by Xiaomi. If anyone uses it with the new, originally locked bootloader that was unlocked after an application to Xiaomi, please confirm that it works.
Aqq123 said:
I've never tried that as I don't use Flashify but I guess so. Anything that works for some other image should also work with this image.
It works fine for me, except the following two issues mentioned in the original post
Click to expand...
Click to collapse
Thank you man, I'll give it a try!
can anyone tell me why when i try the backup option over 10 partitions appears there?
Hello.
i have a question if there is possible to enable led control on Nexus stock M 6.01 MMB29V without TWRP and root.
Thanks and rgds.
semail00 said:
Hello.
i have a question if there is possible to enable led control on Nexus stock M 6.01 MMB29V without TWRP and root.
Thanks and rgds.
Click to expand...
Click to collapse
Without Root - yes (you can use this > http://forum.xda-developers.com/nexus-6/general/led-control-stock-xposed-t3146814
Without TWRP - no
cam30era said:
Without Root - yes (you can use this > http://forum.xda-developers.com/nexus-6/general/led-control-stock-xposed-t3146814
Without TWRP - no
Click to expand...
Click to collapse
I would not advise doing that. As the file is from 5.1.1 there is no telling what changes to the system that has been done.
zelendel said:
I would not advise doing that. As the file is from 5.1.1 there is no telling what changes to the system that has been done.
Click to expand...
Click to collapse
You are correct. I should have been more specific. Post #95 includes file download from CM13 (Android 6.0). Working fine for me on MMB29V.
cam30era said:
You are correct. I should have been more specific. Post #95 includes file download from CM13 (Android 6.0). Working fine for me on MMB29V.
Click to expand...
Click to collapse
Even then that is for that build. It may cause other issues on different builds.
zelendel said:
Even then that is for that build. It may cause other issues on different builds.
Click to expand...
Click to collapse
I agree. It could. But isn't that what we all do here about that? Modifications that are not necessarily 100% bullet proof? And looking for feedback from others who are using it..?
semail00 said:
... possible to enable led control on Nexus stock M 6.01 MMB29V without TWRP and root....
Click to expand...
Click to collapse
It seems to me that you already know the answer. You are familiar with the terms TWRP and root.
Beside the question you need to give a motive.
NLBeev said:
It seems to me that you already know the answer. You are familiar with the terms TWRP and root.
Beside the question you need to give a motive.
Click to expand...
Click to collapse
Hello,
I just wanted to see if it was possible activate led notification without changing the original system, even with some apks ( I do not know but that someone could know ). This was the meaning of my request ..... I apologize if I have not been able to explain.
rgds.
semail00 said:
Hello,
I just wanted to see if it was possible activate led notification without changing the original system, even with some apks ( I do not know but that someone could know ). This was the meaning of my request ..... I apologize if I have not been able to explain.
rgds.
Click to expand...
Click to collapse
Understood. It is nice to know the 'why' behind questions.
On my N6 I've LED control, but with a Lite rom of Danvdh and the cataclysm mod. Works good, but .......root and TWRP.
Hello,
i Have Samsung s6 SM-G925F with Android version Lolipop 5.1.1. (arm64-v8a).
i rooted My Phone => i Instaled TWRP => Backup =>then i Instaled "XtreStLite_ROM_v2.4_Deo-Mod-Edition_XXU3coi9_...." => then i Instaled Xpsed installer, it say Framework not Installed, i Download and flashed Succesfully the "xposed-v86-sdk22-arm64.zip" but the Problem i stay on Boot Loop => i do a recovery, i did this process with different ROM's.
what did i wrong?
My Goal => install the framework to download and unse the Module Mock Mock location. if this rom is not compatible with xposed then i will unse any other rom that work with it, i heared i neeeded a Deoxed ROM for my goals (fake, fake gps on Pokemons go).
any Help will be apreciated
I have the exact same issue. I would appreciate help as well.
@hisch use Wanam's version of Xposed http://forum.xda-developers.com/showthread.php?t=3180960
@zawey if you have the same phone and version of Android, you use it too
mattzeller said:
@hisch use Wanam's version of Xposed http://forum.xda-developers.com/showthread.php?t=3180960
@zawey if you have the same phone and version of Android, you use it too
Click to expand...
Click to collapse
I have the same phone but not the same version. I have 6.0.1 Can I still use it?
zawey said:
I actually have 6.0.1 Can I still use it?
Click to expand...
Click to collapse
Absolutely, take a look at the thread, works on stock 5.1 & 6 TW ROMs odex or deodex
mattzeller said:
Absolutely, take a look at the thread, works on stock 5.1 & 6 TW ROMs odex or deodex
Click to expand...
Click to collapse
Will try it right now then. Thanks for the answer. Really appreciate it
zawey said:
Will try it right now then. Thanks for the answer. Really appreciate it
Click to expand...
Click to collapse
Np, post back if it works or not
mattzeller said:
Np, post back if it works or not
Click to expand...
Click to collapse
It worked perfectly. I got it installed, my phone didn't get stuck in a bootloop and I checked Xposed Installer and it says that I have the framework. Thank you very much for the help!
zawey said:
It worked perfectly. I got it installed, my phone didn't get stuck in a bootloop and I checked Xposed Installer and it says that I have the framwork. Thank you very much for the help!
Click to expand...
Click to collapse
No problem, glad I could help