Hello,
I downgraded from 4.4.2 to 4.2.2 and although my knock-on code was working, I typed 3845#*955# and went to settings and updated the touch firmware.
As soon as I did that, the bottom-left corner (where the back button is on the screen) became very hard to press. 99% of the time it does not detect my touches.
I updated the touch firmware again and now the menu button is very hard to press.
Is there any way of resetting the touch firmware? I have already flashed 20A and 10B firmwares back and forth but it does not fix the issue. I have tried .KDZ and .TOT of different regions and they have the same issue, meaning that the flash (full flash) does not reset the touch firmware.
Please assist with this issue. Thank you!
Or a full erase and full flash of the phone. Is there a way to fully flash it beyond CSE flash? Something that completely erases everything?
up
Related
I was using JB 4.1.1 previously and decided to flash to a new 4.1.2 rom this morning. Everything was fine until the Samsung animation screen. There is no display. My screen is completely dark. But the phone responds when I touch the screen and the home button as well as the power button.
I thought this is the LCD problem but when I boot to Recovery, the display turns on and everything is fine. So I decided to flash to another rom but the same problem occurs. Did I brick my phone? Any solution guys? Some help would be very much appreciated.
IlDivinCodino said:
I was using JB 4.1.1 previously and decided to flash to a new 4.1.2 rom this morning. Everything was fine until the Samsung animation screen. There is no display. My screen is completely dark. But the phone responds when I touch the screen and the home button as well as the power button.
I thought this is the LCD problem but when I boot to Recovery, the display turns on and everything is fine. So I decided to flash to another rom but the same problem occurs. Did I brick my phone? Any solution guys? Some help would be very much appreciated.
Click to expand...
Click to collapse
Try to do checksum on the ROM zip file you flashed, if it was correct.. then try to do a fresh new flash of the ROM:
1- Make sure you're on a safe kernel .. if not, please flash a safe kernel (I prefer Abyss GB Kernel)
2- flash the file in the attachments
3- flash your ROM file
my xt890 lcd screen and digitizer were broken so i changed them and the phone was working fine for a week, i then wanted to update to kitkat through oem update; everytime i tried it would give me error . i then read that since i unlocked bootloader and rooted my phone and installed cwm recovery i couldnt do an oem update and i had to do a factory reset in order to update through oem, so i did just that ; after the phone finished factory reset and booted i proceeded with oem update while the phone was charging, everything was going fine the file was downloading, i went to the bathroom and came back the display was black, but touch screen was working fine...through more searching i read that this could be from the update, and i should do another reset... since i couldnt see anything even recovery menu. i downloaded moborobo so i can see my screen on pc and proceeded to factory reset ... now i cant even see through moborobo and im stuck. i think im stuck in recovery screen, but no way to be sure , hence i cant get usb debug.Please help.
I have the tmobile GS6 and I'm trying to flash a rom. When I go to zip or ota and flash it the screen goes black and it scrolls through the process of what looks like reading the rom then nothing. What am I doing wrong? I have to hard rest the phone to get it back on. I've tried unrooting and factory reseting my device as well as flashing the stock firmware through odin.
wootcarlos said:
I have the tmobile GS6 and I'm trying to flash a rom. When I go to zip or ota and flash it the screen goes black and it scrolls through the process of what looks like reading the rom then nothing. What am I doing wrong? I have to hard rest the phone to get it back on. I've tried unrooting and factory reseting my device as well as flashing the stock firmware through odin.
Click to expand...
Click to collapse
It's still in beta testing right? Might be the current build, regardless you should go to the flashfire op and see if other's are having this issue if not ask there.
After flashing the following ROM: D5803_23.4.A.0.546_Baltic.ftf with flashtool, which is a stock 5.1.1 ROM with root and without the original bloatware, I have completely lost the functionality of the touch screen. Even to switch off or reboot the phone I had to dismantle it and disconnect the battery. I have since reflashed stock ROMs: Kitkat and Lollipop 5.1.1 but I still have no touch screen. Have I killed my brand new phone or is there a solution to this?
Cheers.
is the touch screen connected to the motherboard?
instead dismantle the phone and disconnect the battery. hold power button for 10 seconds and the phone will turn off.
evildog1 said:
is the touch screen connected to the motherboard?
instead dismantle the phone and disconnect the battery. hold power button for 10 seconds and the phone will turn off.
Click to expand...
Click to collapse
Hi. Thanks. I haven't been as far as the touch screen connections, only removed the back cover to disconnect the battery. I fear a touchscreen death due to flashing a corrupt rom?..
i think you flashed the firmware that does not match with your phone model. try flash different firmware and make sure the firmware match with your phone model. forum.xda-developers.com/z3-compact/general/list-stock-firmwares-d5803-d5833-t2906706
i had the same problem with the touch screen after i flashed wrong firmware on my tablet. i flashef correct rom and the touch screen works again
evildog1 said:
i think you flashed the firmware that does not match with your phone model. try flash different firmware and make sure the firmware match with your phone model. forum.xda-developers.com/z3-compact/general/list-stock-firmwares-d5803-d5833-t2906706
i had the same problem with the touch screen after i flashed wrong firmware on my tablet. i flashef correct rom and the touch screen works again
Click to expand...
Click to collapse
I have tried that already. I have tried a Kitkat ROM and a Lollipop ROM from the same list you mentioned...
have you wiped everything before you flashing? try flash NORDIC firmware version, don't execute everything, wipe everything and flash. i had flashed 23.4.A.0.546 NORDIC version and it works perfectly. my previous firmware was 23.4.A.0.546-GLOBAL
evildog1 said:
have you wiped everything before you flashing? try flash NORDIC firmware version, don't execute everything, wipe everything and flash. i had flashed 23.4.A.0.546 NORDIC version and it works perfectly. my previous firmware was 23.4.A.0.546-GLOBAL
Click to expand...
Click to collapse
What do you mean by "wipe everything" how do I do that - especially with no touch screen?..
fgaine said:
What do you mean by "wipe everything" how do I do that - especially with no touch screen?..
Click to expand...
Click to collapse
in Flashtool. check APPS_LOG, CACHE AND USERDATA and it will wipe and flash your phone for you
I had this problem, the non responsive touchscreen happened once then went away with a few restarts. Then a few days later it returned for good.
I reflashed it a to an old kitkat and the problem was still there, Then reset and updated the phone using the sony pc companion- still no good.
I ended up taking it back for warranty repair, sony put in a new board and screen.
evildog1 said:
in Flashtool. check APPS_LOG, CACHE AND USERDATA and it will wipe and flash your phone for you
Click to expand...
Click to collapse
That worked. I also pressed on the touchscreen connector before reflashing ( maybe I should have followed your advice and done that in the first place) so I don't know which sorted it but it did. Many thanks for your relentless support! :good::good::good:
FYI: I flashed a stripped 5.1.1 stock ROM with Xposed. No Sony bloatware on it. Couple bugs but seems otherwise stable:
Rooted Xperia Z3 Compact 5.1.1 ROM with Xposed installed and Bloatware removed
Hi everyone,
I have a D5803 device.
I was using CM13 unofficial version in this site. 2 days ago, i decided to go back stock.
After flashing the stock ftf and rebooting the phone, i stuck at the language selection screen. Screen not responding any touching activity. I flashed the ftf again and again. But no solution.
Here is what i've done to get it solved(but couldn't):
-Restarted the phone using power + volume up buttons
-Unlocked and locked bootloader(tried both)
-Flash another kernel and go to TWRP, but it is the same. Can't touch.
-Flashed another stock ftf (older versions)
So i started to think that it is some hardware problem. But I NEVER PUT MY PHONE UNDER THE WATER OR DROPPED IT.
How can flashing a ftf cause this?
Any idea?
(Sorry for bad english if there are any mistakes.)
Hello.
I got a Huawei P9 L09 with an unlocked bootloader and after flashing a few roms onto it I noticed with the last two flashes that whenever I lock my phone it appears that the screen stays turned off no matter what and until I reboot the entire device. I only can see the screen after it's turned on, can still use it like normal until I lock the phone. I also noticed that I can't register fingerprints (even if I deleted the old ones before flashing a new ROM) any longer at the exact same time the black screen problem occurred.
I tried to run m00nlight before and with this ROM the problem already begun. Now I installed Bluewei (believing m00nlight had this one problem by itself but it didn't) and the same problem occurred again.
What did happen to my device? Did I miss something or do I need to flash a certain image to repair it?
Edit: I found that the finger prints still were set since Bluewei was installed. I could remove them and the fingerprint could be set again.
Greetings and happy new year.
Before installing ROMs (all cases except OTA updates), you must remove pin/fingerprint/password protection. Specially for custom ROMs like the above that flash over system partitions.
IMO, go back to stock ROM (and stock Recovery), rollback to b182 (no need to go down to b136). By few immediate OTA updates you will cone back to the latest b39x...
PS Try first a simpler solution: Completely disable lockscreen protection, wipe Dalwik and Cache. If it helps you can later re-enable lockscreen prtection
Sorry for my late response.
How do I actually do a rollback to b182? Do I need certain files or the stock rom b182 for that? And how do I install them?
I often tried to put the update.app into the dload folder on my SD and held Power + VolUp + VolDown, however it always said that the update failed, no matter what I tried.
If you are customization C432 here are the steps:
1. Download Rollback package http://download-c1.huawei.com/download/downloadCenter?downloadId=92087&siteCode=sk =>Unzip it, move it to dload folder do the 3 buttons combo. This will change your customization to C900 which is called interflashable.
2. Then download http://download-c1.huawei.com/download/downloadCenter?downloadId=91706&siteCode=sk =>Which is full firmware B182 (your customization will be normal again C432). Unzip it, move to dload folder and perform 3 buttons combo and voila, you are on B182
This will LOCK your bootloader and FORMAT(enrypt) data!