Database Develop

looking for 5.0 g870a ota

hello i recently went back to stock on my phone and i'm trying to upgrade all way to 5.1.1. After I downgraded I was able to use the phones upgrade option in settings and that got me to 4.4.4 and now it keeps telling me I'm up to date which we all know isn't right. I found a 5.0 .cfg file searching this forum but no info on how to use the cfg. someone said change it to .zip and others replied back with it didn't work. so i'm trying to find the right way to do this without bricking my phone... any help would be greatly appreciated.

5.11 ota
https://www.dropbox.com/s/cz0d1h6oi8kz1uh/2400258.cfg?dl=0
SM-G870A Peace

Update.zip 5.1.1 G870 OTA File Here
Hi everyone this is the .cfg converted to an update.zip file ( yes it has been tested ) please place in your platform tools folder and adb sideload update.zip once your flash is done you will be on stock 5.1.1 please make sure you do a hard reset if you get any force closes and don't forget to back up your data. You can also place the zip file on your EXT SD card and apply the update from storage as well. The file is hosted at MEGA for a faster download. ENJOY THIS IS STOCK UNROOTED!! If you wish to update and keep root go to that thread here in the general section.
download
https://mega.nz/#!UtkxSZyJ

MJHawaii said:
Hi everyone this is the .cfg converted to an update.zip file ( yes it has been tested ) please place in your platform tools folder and adb sideload update.zip once your flash is done you will be on stock 5.1.1 please make sure you do a hard reset if you get any force closes and don't forget to back up your data. You can also place the zip file on your EXT SD card and apply the update from storage as well. The file is hosted at MEGA for a faster download. ENJOY THIS IS STOCK UNROOTED!! If you wish to update and keep root go to that thread here in the general section.
download
https://mega.nz/#!UtkxSZyJ
Click to expand...
Click to collapse
So, how about that decryption key?

Decryption key please sir.

I need key for this???

Does anyone have the OF2 or OF3 OTAs?
I am on BOC5 Lollipop 5.0 and I can't install the the 5.11 OTA that was posted above, it starts but after checking the contents fails with an error something like error 7 on package. I wondered if it was because you cant go from my 5.0 OC5 straight to the new 5.11 build?
I want to keep stock but can't update OTA as I'm in the UK. I installed the BOC5 update by downloading the 1.6GB cfg file and renaming it to update.zip and placing on my SD card etc.

MJHawaii said:
Hi everyone this is the .cfg converted to an update.zip file ( yes it has been tested ) please place in your platform tools folder and adb sideload update.zip once your flash is done you will be on stock 5.1.1 please make sure you do a hard reset if you get any force closes and don't forget to back up your data. You can also place the zip file on your EXT SD card and apply the update from storage as well. The file is hosted at MEGA for a faster download. ENJOY THIS IS STOCK UNROOTED!! If you wish to update and keep root go to that thread here in the general section.
download
key for decrip the file?
Click to expand...
Click to collapse

MJHawaii said:
Hi everyone this is the .cfg converted to an update.zip file ( yes it has been tested ) please place in your platform tools folder and adb sideload update.zip once your flash is done you will be on stock 5.1.1 please make sure you do a hard reset if you get any force closes and don't forget to back up your data. You can also place the zip file on your EXT SD card and apply the update from storage as well. The file is hosted at MEGA for a faster download. ENJOY THIS IS STOCK UNROOTED!! If you wish to update and keep root go to that thread here in the general section.
download
Please upload the file in other server o show us the complete link of mega! this link is protected by key
Click to expand...
Click to collapse

MJHawaii said:
Hi everyone this is the .cfg converted to an update.zip file ( yes it has been tested ) please place in your platform tools folder and adb sideload update.zip once your flash is done you will be on stock 5.1.1 please make sure you do a hard reset if you get any force closes and don't forget to back up your data. You can also place the zip file on your EXT SD card and apply the update from storage as well. The file is hosted at MEGA for a faster download. ENJOY THIS IS STOCK UNROOTED!! If you wish to update and keep root go to that thread here in the general section.
download
https://mega.nz/#!UtkxSZyJ
Click to expand...
Click to collapse
Mega ask for decrypt key for this file
---------- Post added at 10:44 PM ---------- Previous post was at 10:06 PM ----------
dan.lumbard said:
I am on BOC5 Lollipop 5.0 and I can't install the the 5.11 OTA that was posted above, it starts but after checking the contents fails with an error something like error 7 on package. I wondered if it was because you cant go from my 5.0 OC5 straight to the new 5.11 build?
I want to keep stock but can't update OTA as I'm in the UK. I installed the BOC5 update by downloading the 1.6GB cfg file and renaming it to update.zip and placing on my SD card etc.
Click to expand...
Click to collapse
this is the of3 ota file https://mega.nz/#!LVFHRT5T!BxZezTa7E...XLhavI-bD5W7nU
you can test and tell us if works!
source http://forum.xda-developers.com/att...0-keeproot-t3161733/post62254948#post62254948

Converting L09 to UL00

Hi,
I followed the instructions to convert L09 to Middle Eastern & North and South Africa version and it all worked well for me, but I'm wondering how do I convert to Chinese version? Can anyone help with some information?
Like do i just need to edit the build.prop and have the correct regions update.app file? or is something else necessary.
Thanks in advance
Gavin

brumgav said:
Hi,
I followed the instructions to convert L09 to Middle Eastern & North and South Africa version and it all worked well for me, but I'm wondering how do I convert to Chinese version? Can anyone help with some information?
Like do i just need to edit the build.prop and have the correct regions update.app file? or is something else necessary.
Thanks in advance
Gavin
Click to expand...
Click to collapse
So I managed to convert to Chinese version. This is how I did it.
While fresh in the memory, instructions on how to change the region+ firmware to UL00
What do you need (links in 004's original post earlier in the thread or here:
1. Firmware UL00-C433B114 (Middle East, North and South Africa)
2. The oeminfo.img program to change the locale (45.69 KB) Anti-Virus may or complain, so disable it)
3. Mounted on the phone ES Explorer (Solid or Root Explorer will not work !!!)
4. You need a copy of your existing ROM versions recovery.img. You can get this using the Huawei ROM extractor tool.
What to do:
1. Flash TWRP Recovery through Fastboot (Bootloader must be unlocked)
2..Get Root (install SuperSU.zip through TWRP), reboot.
3. Install and enable root in settings of ES Explorer and go to the folder /dev/block/platform/hi_mci.0/by-name/
4. Copy oeminfo file and transfer it to your computer
5. On your computer, unpack the oeminfo.exe program from the RAR. Put your oeminfo file in the same folder.
6. Rename oeminfo in oeminfo.img
7. Run oeminfo.img.exe and type hw / meafnaf replacing dualcu / cn - click apply
8. Rename oeminfo.img back to oeminfo and copy to your mobile phone
9. Replace the original file in the phone to change (overwrite)
10. Go to the phone / system / and open the file build.prop
11. Find the line ro.build.displey.id = change your version to "=" CRR-UL00C433B000 and save changes
EDIT ?: These steps (10/11) MUST be completed or it will not allow you to update later with new regions ROM
12. Extract the new ROM file on your computer with the firmware.
13. Copy dload folder with the Update.app file and copy it to the phone's internal memory or MicroSD card
14. Flash back stock recovery from your existing ROM (use the extractor tool if needed). You can do this now or at the end before flashing but you must remove TWRP and ROOT before attempting to flash new rom.
15. On the phone go Settings - Update.
16. Select Menu - Local update
I then ensured Google Play was installed.
After doing this, flashed TWRP again and Rooted the phone, I then edited the oeminfo file using the above method, changing the attribute back to "dualcu/cn". After this I edited the build.prop to using the above method but this time I changed "ro.build.display.id=CRR-UL00C00B131".
I then removed root and flashed the original Huawei recovery, and then rebooted and went to update settings. I searched for update and a new file was found however a modified system was detected so it offered to download a full version which was the B160 build. This downloaded and then updated and now I have CRR-UL00C00B160 version

Whats the advantage of this Version?

There are more updates to the Chinese version..they are on build B160 whereas UK still on build B144.
Some other features like dual SIM should work however I haven't tested this.
Other things like build in virus scanner, permissions manager and also the ability to set the date of your mobile data plan to help keep track of data usage and allowance.
Pressure sensitive screen is also featured although not yet used in any apps but maybe it will be enabled soon by Huawei

brumgav said:
So I managed to convert to Chinese version. This is how I did it.
While fresh in the memory, instructions on how to change the region+ firmware to UL00
What do you need (links in 004's original post earlier in the thread or here:
1. Firmware UL00-C433B114 (Middle East, North and South Africa)
2. The oeminfo.img program to change the locale (45.69 KB) Anti-Virus may or complain, so disable it)
3. Mounted on the phone ES Explorer (Solid or Root Explorer will not work !!!)
4. You need a copy of your existing ROM versions recovery.img. You can get this using the Huawei ROM extractor tool.
What to do:
1. Flash TWRP Recovery through Fastboot (Bootloader must be unlocked)
2..Get Root (install SuperSU.zip through TWRP), reboot.
3. Install and enable root in settings of ES Explorer and go to the folder /dev/block/platform/hi_mci.0/by-name/
4. Copy oeminfo file and transfer it to your computer
5. On your computer, unpack the oeminfo.exe program from the RAR. Put your oeminfo file in the same folder.
6. Rename oeminfo in oeminfo.img
7. Run oeminfo.img.exe and type hw / meafnaf replacing dualcu / cn - click apply
8. Rename oeminfo.img back to oeminfo and copy to your mobile phone
9. Replace the original file in the phone to change (overwrite)
10. Go to the phone / system / and open the file build.prop
11. Find the line ro.build.displey.id = change your version to "=" CRR-UL00C433B000 and save changes
EDIT ?: These steps (10/11) MUST be completed or it will not allow you to update later with new regions ROM
12. Extract the new ROM file on your computer with the firmware.
13. Copy dload folder with the Update.app file and copy it to the phone's internal memory or MicroSD card
14. Flash back stock recovery from your existing ROM (use the extractor tool if needed). You can do this now or at the end before flashing but you must remove TWRP and ROOT before attempting to flash new rom.
15. On the phone go Settings - Update.
16. Select Menu - Local update
I then ensured Google Play was installed.
After doing this, flashed TWRP again and Rooted the phone, I then edited the oeminfo file using the above method, changing the attribute back to "dualcu/cn". After this I edited the build.prop to using the above method but this time I changed "ro.build.display.id=CRR-UL00C00B131".
I then removed root and flashed the original Huawei recovery, and then rebooted and went to update settings. I searched for update and a new file was found however a modified system was detected so it offered to download a full version which was the B160 build. This downloaded and then updated and now I have CRR-UL00C00B160 version
Click to expand...
Click to collapse
Hello, could you please tell me why do you write (type) in step 11. CRR-UL00C433B000 instead of CRR-UL00C433B114? Thanks for your answer.

MoritzSu said:
Hello, could you please tell me why do you write (type) in step 11. CRR-UL00C433B000 instead of CRR-UL00C433B114? Thanks for your answer.
Click to expand...
Click to collapse
you need to set your build.id to B000 so you can update to B114 with an full update package in the EMUI Update app

Tuerkay said:
you need to set your build.id to B000 so you can update to B114 with an full update package in the EMUI Update app
Click to expand...
Click to collapse
Thanks for your soon answer. To say the truth, i have just completed the process. Unfortunately, i wrote (in my case) CRR-L09C432B114 instead of CRR-L09C432B000; my device ist just running with this B114 Rom. I was running the B119 Rom before, what should i do now in order to receive the updates?

MoritzSu said:
Thanks for your soon answer. To say the truth, i have just completed the process. Unfortunately, i wrote (in my case) CRR-L09C432B114 instead of CRR-L09C432B000; my device ist just running with this B114 Rom. I was running the B119 Rom before, what should i do now in order to receive the updates?
Click to expand...
Click to collapse
if you have changed your localization ( the "Cxxx" part) then you won´t receive any updates. You have to manualy update via Update.APP files.
Your IMEI is linked to you Build/Localization. This way, Huawei makes sure that every phone receives the right update file. If you change one of both, you won´t receive OTA updates anymore, since the update system can´t assign the "right" update file.

Anyone can confirm the dual sim function work after this procedure?? This I want a dual sim active dfsa

it does not, EU Mate S does not have dual-dim hardware

brumgav said:
7. Run oeminfo.img.exe and type hw / meafnaf replacing dualcu / cn - click apply
Click to expand...
Click to collapse
Anybody know, where to get this information from?
if I want to change to any other region where can I find the correct information for the OEMINFO.IMG?

Sventastic said:
Anybody know, where to get this information from?
if I want to change to any other region where can I find the correct information for the OEMINFO.IMG?
Click to expand...
Click to collapse
Sorry I don't know

Please share file oeminfo Dual Sim CRR-UL00 any region (hw/meafnaf or dualcu/cn)

Update C432B564-FULL DUAL-SIM

Hi guys, I got message about new update on B560
I downloaded it and i'm going to give update.zip to you guys instantly when i have finished uploading file with my slow network.
If someone gets link before me. Link it here and i will edit it to this message
Model: ALE-L21
Android: 6.0
EMUI: 4.0
Firmware: B564
Build: ALE-L21C432B564-FULL
Region: Europe
Status: Official
Type: Full
Size: 1,48 Gb
Download
https://mega.nz/#!SU93FKwA!aa7rt_ToeplclhAPZ9XzeyLUZX9c5vV1EQiOfXFUHWQ
Installation
NOTE: I DON'T TAKE CARE ABOUT ANYTHING THAT MAY HAPPEN TO YOU PHONE!
YOU DO THIS AT YOUR OWN RISK
Normal upgrade
Step 1. Format the Micro SD card (This operation is optional).
Step 2. Copy the Software: main package UPDATE.APP to a directory named dload.
Step 3. Copy the entire dload folder (with UPDATE.APP in it) to the root directory of the Micro SD card. Check if the whole file list in sdcard,
Insert the Micro SD card into the handset and power on. After entering call -> enter:*#*#2846579#*#* -> ProjectMenu -> Software Upgrade -> SDCard Upgrade-> OK.
Force upgrade
Step 1. Format the Micro SD card (This operation is optional).
Step 2. Copy the Software: main package to a directory named dload.
Step 3. Copy the entire dload folder (with UPDATE.APP in it) to the root directory of the Micro SD card. Check the file list is right.
Step 4. Make sure your handset is power off. Insert the Micro SD card into the handset. Press the VOLUME UP and VOLUME DOWN key, and then press the POWER key to power on the phone and enter the Software Upgrade Mode.
Step 5. When the progress bar stop, the phone will restart automatically.
## Changelog ##
This update improves system performance and stability.
[Fixes]
Fixed an issue where 1080p videos can't be uploaded to Twitter.
Fixed an issue where Huawei Watch occasionally doesn't receive messages.
Fixed an issue where some UI elements are displayed incorrectly.
[Optimizations]
Improved system performance and stability for smoother operations
Improved device security with latest Google security patches.

Vika__ said:
Hi guys, I got message about new update on B560
I downloaded it and i'm going to give update.zip to you guys instantly when i have finished uploading file with my slow network.
If someone gets link before me. Link it here and i will edit it to this message
Click to expand...
Click to collapse
Thanks for sharing this ROM bro. I need this to cooking custom :cyclops:

Uploaded almost 200mb to Mega.
So sad that i have ~200kb/s upload speed but. Have to go what i have
If someone afterwards uploads this somewhere else server. Give link to me and i will put it in first post

Got this as update on B550 as well! Updating now.
Edit: Contains Pro camera mode! No light painting though.

Download link online

Vika__ said:
Download link online
Click to expand...
Click to collapse
downloading.
thanks

can someone share a screen shot of the pro camera mod ?

AmINoS007 said:
can someone share a screen shot of the pro camera mod ?
Click to expand...
Click to collapse
http://i.imgur.com/Xx9O3wG.png

i'm in b550 and receive update to b564, size 213 mb

but I dont know how to use it.

where is the UPDATE.APP file? i extraxt it from zip and there is many many file.

MyGalaxysIII said:
where is the UPDATE.APP file? i extraxt it from zip and there is many many file.
Click to expand...
Click to collapse
Update app is inside the zip. You don't need to bother those other files.

Thx guys for the pics

does OTA work on twrp recovery??
i received OTA update but i am on TWRP recovery

For me it worked but i don't promise it will work for you
Edit: but remember if it works. Update still installs stock recovery so you have to flash twrp again

Vika__ said:
For me it worked but i don't promise it will work for you
Edit: but remember if it works. Update still installs stock recovery so you have to flash twrp again
Click to expand...
Click to collapse
i already downloaded the zipped file.. how can i flash that??
do i need to extract it and flash via adb or just flash the zipped file
P.S. i switched back to stock recovery

Installation methods are on first post

OTA update is taking too long to download..
72~100 K/s...
Sent from my ALE-L21 using XDA-Developers mobile app

Since we're pointing out changes, Spotify now shows album covers on our lockscreen just like the native music app.
Really cool! The fact that it showed info on the current song that was playing but not the album cover was bugging me a lot.

I am stuck at 19%.. It's been 10 minutes already.. I tried local update (from @sokkoban's blog)...

Stock on MM

I've a Huawei P9 EVA-L19C185B220 and are on Android MM.
I REALLY want to update my phone's os to Android nogat..
Any tips?
And sorry for my bad English

how much u will pay me

spring80 said:
how much u will pay me
Click to expand...
Click to collapse
Oh no, common spring..
Don't get me wrong but I tried as hell to do what you said but it was pointless

there is new update now for L19C185 it is B385 last version of nougat.
download this :
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1582/g104/v78896/f2/full/update.zip
extract Update.app file to dload folder and use the dload method to install it.
after finish and rebooting system.
download this:
http://update.hicloud.com:8180/TDS/...ll/hw/meafnaf/update_data_full_hw_meafnaf.zip
extract update.app to dload folder and use the dload method to install it.
this is
dload method: put update.app into dload folder ,and use the code in the dialer :*#*#2846579#*#* and choose software upgrade

spring80 said:
there is new update now for L19C185 it is B385 last version of nougat.
download this :
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1582/g104/v78896/f2/full/update.zip
extract Update.app file to dload folder and use the dload method to install it.
after finish and rebooting system.
download this:
http://update.hicloud.com:8180/TDS/...ll/hw/meafnaf/update_data_full_hw_meafnaf.zip
extract update.app to dload folder and use the dload method to install it.
this is
dload method: put update.app into dload folder ,and use the code in the dialer :*#*#2846579#*#* and choose software upgrade
Click to expand...
Click to collapse
I tried to install the first file but it failed at 5%

hassan1111 said:
I tried to install the first file but it failed at 5%
Click to expand...
Click to collapse
me too failed at 5% (incompatibility)
I also using eva-l19c185b220

I'm finally on Android n!!
I used this link from frimware finder app
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1256/g104/v73830/f1/full/update.zip

[GUIDE] Flash the new update early w/o unlock bootloader

{Tools that you need}
1.A P9 lite
2.The files you want to flash (in my case L21C432B370+data files)
3.Firmware Finder
4. A brain
5.Patience
Steps:
1.Download the files
2.Launch firmware finder and start a proxy update on the same software as the downloaded packages. But after it goes to 1%, pause the update
3.Go to HwOUC/(the new folder) and paste the zips there
4.Resume the download
5.Update
6.???
7.Profit
I did this on my P9 lite and it's working.

This method is ONLY if you don't got the Nougat update and the proxy method doesn't work.
If you come here to call me a fgt or something, then don't comment here.
This is a NOOB friendly thread.
Thank you and have a nice day

Johnny TDN said:
{Tools that you need}
1.A P9 lite
2.The files you want to flash (in my case L21C432B370+data files)
3.Firmware Finder
4. A brain
5.Patience
Steps:
1.Download the files
2.Launch firmware finder and start a proxy update on the same software as the downloaded packages. But after it goes to 1%, pause the update
3.Go to HwOUC/(the new folder) and paste the zips there
4.Resume the download
5.Update
6.???
7.Profit
I did this on my P9 lite and it's working.
Click to expand...
Click to collapse
Well I have done exactly what you have described but when I resume the download , the update program keeps downloading the files , erasing the ones I did copy/paste in HwOUC/folder

kourkoubas1981 said:
Well I have done exactly what you have described but when I resume the download , the update program keeps downloading the files , erasing the ones I did copy/paste in HwOUC/folder
Click to expand...
Click to collapse
If the proxy method works for you, then that's great.
There are times when it works, or resumes the download (when it gets stuck on 0%)
Maybe you didn't placed the files with the correct names.