Database Develop

my screen are not functioning!!!

i am not able to use my screen anymore and then i continue to ;
1) clear storage with keyboard support of 1,2,3,4
2) succeeded to restore
3) the problem now is stuck at the beginning of setup, but i cannot do anything becoz the screen not able to use anymore!!
plz help, what i'm goin to do now is download 1 of the rom and try to reflash see how.
any other method someone plz advise
million thank
joei

cant even install the HARDSPL http://forum.xda-developers.com/showthread.php?t=334679
sob sob....someone plz help

Touch screen not functioning or no picture due to screen itself not functioning? Anything specific happen that might have caused this? Still under warranty?

the touch screen not functioning at all. i didnt do anything thing before that.it just happen all i did to clear the storage and try to flash with some other roms but not successful.
no more warranty.
thanks for ur reply Guilf. or any other method that i can flash the roms? since i not even able to do anything. but i still can able to go into the bootloader. anything roms that works on the bootloader ?
i still not able to install the HARDSPL and SUPERCID

I've never heard of a ROM negatively impacting the touchscreen - so I'd be somewhat surprised if it fixed it. However, anything is worth the effort.
FYI - you don't need to SuperCID. Just HardSPL. Or try to JumpSPL it. Check for the thread on White Screen Issue during HardSPL in Upgrading section.
If it's still not under warranty and needs to be fixed - PPCTechs replaces the LCD and touchscreen in one unit. $160, I believe. Good luck.

thanks for ur reply, i even try to open up everything and ensure all the cabling is attached propoerly. still not work!
i cant even go into the windows screen i cant do the jumpspl either.
and the PPCTechs is broken link.
sigh...................

found out some scratches on the cable, could it be the reason that my screen not functioning anymore? pplllzzzzzzzz someone advise thanks
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Issue with Rogers Captivate and Custom ROMs (title edit)

I'm about to save you a lot of time Rogers (Canada) Captivate users.
I spent the last 6 hours using http://serendipityrom.weebly.com/download.html these directions to flash a rom.
Here is what they don't tell you.
This is for the AMERICAN version (AT&T) Captivate only. Yes. You will be able to install the rom on your phone... but the SIM card supplied to you by rogers will not work with this rom.
Also, after following the "excellent" tutorials online and via youtube, you will end up with a phone flashed back to "stock" (At&T) stock... with all their bloatware. AND your startup graphic will now be "AT&T world phone"
Who would have known how good we had it as Rogers customers?
Bottom line. Stay away from Serendipity, and possibly all roms. Launcher pro is better than 90% of them anyway it seems. And you can turn that off in .6 seconds.

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

I'm currently using Serendipty 5.2 on my Rogers Captivate with no issues what so ever. You're most certainly doing something wrong.

Nice to know. The latest version is 5.7, which I installed. I will not add a clever image showing your folly by responding to my post out of common courtesy.

MikeyMike01 said:
Click to expand...
Click to collapse
How about explaining what I did wrong instead of a face palm? I know that's asking alot.
Are you saying the tut online doesn't flash to an ATnT stock? Are you saying I'm stupid? Are you saying your rom works no matter what? Tell me. Educate. Communicate.
At the very least refute my claims.

Do your self a favor and delete your comments. It is still early, not too many have read it yet. You need to read much more and gain a better understanding before you post something like this

It would appear that the statement made by the OP is false, in that the ROM works on various versions of the device.
If you need assistance, make a new thread in Captivate Q&A, without a title directing the issue at one particular ROM (how about something like the new title of this thread?)
Explain what you have tried, what isn't working (exactly), and someone might be so good as to tell you what you did wrong.
Closed

[Q] Just bought a Moto X Dev, what should I look for?

I just bought a Moto X Devoloper Edition off a forum. I've tried it for a little while, and all the basic stuff seems to work well. But I want to make sure everything works good. Is there anything special I should look for? Maybe he bricked the boot loader, etc. How would I check?

PCunicorn said:
I just bought a Moto X Devoloper Edition off a forum. I've tried it for a little while, and all the basic stuff seems to work well. But I want to make sure everything works good. Is there anything special I should look for? Maybe he bricked the boot loader, etc. How would I check?
Click to expand...
Click to collapse
If the bootloader were bricked, your phone would not turn on and you wouldn't even be able to get to fastboot mode - obviously this is not the case.
If you are concerned about previous modifications that may have been made, follow the instructions in the return to stock thread to flash back to 100% stock.
Everything you need, including all the links to stock firmware, tools, and drivers are located in that thread. (In the general sub-forum)
CAUTION! DO NOT ATTEMPT TO DOWNGRADE! Only flash the version the phone is currently on, or newer. Also be sure to use the correct firmware for YOUR carrier.
Good luck

I've noticed I have no reception at all (seriously, just a black thing). I shid note, I have no SIM in the phone. Should I be worried? Or will I get reception with a SIM? Anybody with a Verizon Moto X can answer the question by removing their SIM card and looking. Much appreciated.

You'll have to put a sim card in the phone to get service

Just to make sure, it's supposed to look like this without a SIM (the notification bar)?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

PCunicorn said:
Just to make sure, it's supposed to look like this without a SIM (the notification bar)?
Click to expand...
Click to collapse
Yea. No sim no signal.

aviwdoowks said:
Yea. No sim no signal.
Click to expand...
Click to collapse
Too funny

Just a point of interest.... My old S2 has no sim... And I get 2 bars. Lol

Droidthunder unlock bootloader method

Anyone tried this?
I can't as I need phone to work today, can't risk it!
http://www.droidthunder.com/unlock-bootloader-of-huawei/

Does it mean that we will have custom rom in the future if that work ?

badaas said:
Anyone tried this?
I can't as I need phone to work today, can't risk it!
http://www.droidthunder.com/unlock-bootloader-of-huawei/
Click to expand...
Click to collapse
Yes I have tried this, all user ids and passwords were incorrect except first one but the credit was not sufficient to get bootloader code.

I'll buy credits.. But I need to ask if this will work for Honor Play on Android Pie or not?

Dont try its wount work

rajit said:
Dont try its wount work
Click to expand...
Click to collapse
You tried it or just trolling?

Just list of stolen usernames and password, so you will be stealing random users credits.

I bought credit from dc unlocker. Xda is not the place for troll broh. I have even tried to test loint method to bypass. So u know..

I know that dc unlocker is useful tool and i have used it many times my self and probably will use in future too. As a paying customer i don't like to see list of usernames and passwords included on that zip file because someday there might be your or mine usernames and passwords on that list.

So I downloaded it and bought an account just to try it, and installed the required drivers, got the following:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Which I'm inclined to believe means it's not supported yet. Any ideas? Maybe I must've done something wrongly.
EDIT:
Just received an email from support confirming this:
"
DC-Unlocker Support <[email protected]> (sent by [email protected])
4:31 PM (11 minutes ago)
to me
Hello, refund now completed since your mobiles android and security version are not compatible for services.
"
So there you go, I think it might work for other devices but not this one right now

Ok, close thread if needed.
I didn't realise that this included stolen credentials.
Thanks all for feedback.
...

How To Guide I have successfully rooted the Android 11 bottom layer of Xiaomi 11

(I live in China, so the interface uses Chinese, please do not remove my posts)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Only need to unlock the boot loader and execute a very simple command afterwards, boot.img comes from the line brush package of MIUI forum

hi can you share magisk_patched_12.0.12.img link for us,thank you ?

feng.zh.cfo said:
hi can you share magisk_patched_12.0.12.img link for us,thank you ?
Click to expand...
Click to collapse
You can send an email to [email protected], if I see it, I will send you magisk_patched_12.0.12.img as soon as possible. Because I really don’t know what kind of network disk people usually use to share on XDA, maybe you can tell, I will try

G731882624 said:
You can send an email to [email protected], if I see it, I will send you magisk_patched_12.0.12.img as soon as possible. Because I really don’t know what kind of network disk people usually use to share on XDA, maybe you can tell, I will try
Click to expand...
Click to collapse
Hi. XDA people usually use https://androidfilehost.com/ and https://sourceforge.net/ for uploading files.

theincognito said:
Hi. XDA people usually use https://androidfilehost.com/ and https://sourceforge.net/ for uploading files.
Click to expand...
Click to collapse
learnt

magisk_patched_12.0.12.img
I ended up using the Google Drive that I am familiar with

G731882624 said:
magisk_patched_12.0.12.img
I ended up using the Google Drive that I am familiar with
Click to expand...
Click to collapse
I flashed it , and rooted my phone, but it is incompletely, the system cann't mount r/w.

fanxnet said:
I flashed it , and rooted my phone, but it is incompletely, the system cann't mount r/w.
Click to expand...
Click to collapse
Yes. Until now, I haven’t found a place to turn off forced encryption

Rom updates 12.0.17, then flashed this img again. the system crashed.....