8-29-2018
This thread and project is now closed and no longer monitored
PLEASE FLASH THE REMOVER .ZIP IN RECOVERY PRIOR TO INSTALLING THE LIB.ZIP AND APK .
8-28-2016
If you are on recent Nightlies or a Device that has SnapCamera already or on rom with a custom camera hal this is not for you.
UPDATED 8-28-2016
REMOVED CAMERA FROM ZIP AND IS NOW A SEPERATE APK .
(WILL STILL NEED THE ZIP FOR LIBS CURRENTLY )
SEE POST 116 FOR LATEST COS13 CAMERANEXT FOR CM13
SEE POST 2 FOR COS12 CAMERANEXT AND GALLERY FOR CM13
SEE POST 3 FOR MODDED CAMERNEXT V22 AND V10 - Original Mods by abhi08638
SEE POST 5 FOR HTC CAMERA AND GALLERY FOR CM13
SnapCamera.apk and Snap-LIBS.zip from cm13 Nightlies(Bacon)
This is for Cyanogen builds (designed for cm13)without Snap Camera,If you are on Nightlies or a Device that has SnapCamera already this Is not needed and not recommended for you.
It is the same Snap Camera that comes in CM NIghtlies.
PLEASE READ THROUGH ENTIRE OP BEFORE INSTALLING , TROUBLESHOOTING , POSTING OR COMMENTING
SnapCamera.apk and Snap-libs.zip with addon.d Provided on bottom of this post 1 (OP)
"Designed for (Bacon) One Plus One and cm13 based rom users HOWEVER it may or will work on most other Devices "
- but no guarantees!
If issues or problems arise please read thru thread and dont forget to read about the Remover features below!
As stated many times in this thread.This is the same Snap Camera that is supplied in most CM13 Builds.,So if you already have a SnapCamera provided in your Rom this is not needed as it is the same camera and I only update as I see a need.Please Do not ask for Updates
___ FEEL FREE TO POST SCREENSHOTS !
____PLEASE DONT CLUTTER THE THREAD!
_____DEVELOPMENT MAY STALL OR STOP AT ANY TIME
_______I DONT FOLLOW THE THREAD DAILY ,BUT WILL POP IN WHEN I AM AVAILABLE .
Troubleshooting
(if you are removing Gallery2 in your gapps-config ,then the picture viewing will force close.that Gallery is needed for snap.An alternative is just freeze it in TB after selecting a new default after first use of snap camera)
OR
If picture preview isnt working when you click on picture bubble that means you dont have a compatible gallery.
Solution: Install QuickPIC Gallery
If anything causes a force close just go into settings and app info of camera and clear data in storage of this camera.
Developer options TO ACTIVATE repeatedly press ten plus times on the red eyes detection setting.
Known issue with some roms -the screen will freeze after taking picture (to fix just toggle front /rear cam icon to un-freeze this is WIP)
dev options feature might not be accurate anymore,I havent tested on these later builds.
FORCE CLOSE TIPS
If Camera force closes just re-open or reset phone.
If stuck in force close after a reset just go into settings -apps - and clear data of said camera.
The lib. zip will add the lib files needed for this camera to work correctly .
I ALSO CREATED AND ADDED AN ADDON.D FILE (99-snap-libs.sh) SO IT WILL SURVIVE UPDATES,HOWEVER IF YOU WIPE SYSTEM MANUALLY SUCH AS IN RECOVERY YOU WILL NEED TO RE-FLASH snap.libs.zip again JUST LIKE GAPPS AND YOUR ROM.
PLEASE READ CAREFULLY BELOW (BECAUSE I WILL NOT BE HELD RESPONSIBLE IF YOU SCREW UP YOUR EXISITNG SNAP CAMERA ,NO NEED TO FLASH THIS ZIP IF YOUR ROM COMES WITH SNAP CAMERA.THIS IS DESIGNED FOR ROMS THAT DOESNT HAVE SNAP CAMERA ALREADY INSTALLED .
THE REMOVER OR ZIPS WILL NOT REMOVE AN EXISITING SNAP CAMERA ALREADY SUPPLIED IN YOUR ROM (UNLESS IT WAS KANGED FROM THIS THREAD)IT WILL ONLY REMOVE MY PREVIOUS VERSIONS OF SNAPCAMERA THAT WERE PROVIDED IN MY PREVIOUS BUILDS WHEN CAMERA WAS STILL INCLUDED IN ZIPS(IT IS NOW A SEPERATE APK FILE AND INSTALLED SEPERATE FROM THE SBAP-LIBS.ZIP )
(SEE THE REMOVER DESCRIPTIONS BELOW.)
.PLEASE NOTE :: IF USING THE REMOVER.ZIP,IT IS DESIGNED TO REMOVE MY OLDER AND ALL PREVIOUS VERSIONS OF SNAPCAMERA WHEN THEY WERE INCLUDED IN PREVIOUS ZIPS (THEY ARE NO LONGER INCLUDED IN ANY ZIPS) IT WILL ALSO REMOVE THE LIB FILES AND THE ADDON.D RECOVERY FILE.
PLEASE NOTE
REMOVING THE LIB FILES ON A ROM WITH AN EXISTING SNAP CAMERA WILL CAUSE THE ORIGINAL SNAP CAMERA TO STOP WORKING (USES THE SAME LIB FILES)-IF THIS HAPPENS JUST DIRTY FLASH THE SNAP-LIBS.ZIP AND OR YOUR ROM AGAIN.
THE REMOVER IS DESIGNED TO ONLY REMOVE THE LIBS,ADDON.D AND CAMERAS THAT WERE INCLUDED IN ANY OF MY EARLIER ZIPS (BEFORE I DECIDED TO REMOIVE THE CAMERA FROM ZIP AND MAKE IT SEPERATE))
Again the SnapCamera.apk and the Snap-libs.zip is pulled from CM13 Nightlies (Thanks Cyanogen Team) and updated only when I noticed changes and feel an update is needed.
QUICK TROUBLESHOOTING NOTE:
MOST RECENT AND MOST COMMON ISSUE LATELY
QUESTION:
I THE CAMERA ISNT SHOWING UP OR DIDNT WORK OR SHOWING MORE THAN ONE OF THE SAME.ANY IDEA WHAT THE PROBLEM IS?
ANSWER:
YES
DID YOU RUN THE REMOVER?IF NOT PLEASE RUN REMOVER IN RECOVERY.
BEFORE INSTALLING THE APK AGAIN ,DO THE FOLLOWING
1- WHILE IN RECOVERY OR IN FILE MANAGER CHECK TO SEE IF THERE IS A FILE CALLED
ORG.CYANOGENMOD.SNAP OR SNAP-1 IN THE /DATA/APP FOLDER?
,IF SO DELETE IT .
2- CHECK TO SEE IF THERE IS A FILE CALLED SNAP IN SYSTEM/APP AND OR /SYSTEM/PRIV-APP?
IF SO DELETE IT .
3-FLASH THE SNAP-LIBS.ZIP IN RECOVERY
4- INSTALL THE SNAPCAMERA.APK THROUGH FILE MANAGER OR WHATEVER YOU USE TO INSTALL APK FILES
REBOOT AND TRY AGAIN.
IF YOU ARE ON NIGHTLIES OR ROM THAT HAS SNAP CAMERA INCLUDED AND JUST WANT IT BACK,JUST WIPE SYSTEM,CACHES (DO NOT WIPE DATA) AND REFLASH ROM AND GAPPS AGAIN AND THE ORIGINAL SNAP CAMERA SUPPLIED IN ROM SHOULD BE BACK HOW IT WAS!!
**THIS CAMERA IS NOT DESIGNED TO WORK ON OXYGEN**
**IF YOU ARE ON NIGHTLIES AND IT IS SUPPLIED IN YOU ROM THERE IS NO NEED FOR THIS CAMERA**
This is for Cyanogen builds without Snap Camera
,If you are on Nightlies or a Device that has SnapCamera already this Is not needed and not for you.
It is the same Snap Camera that comes in CM NIghtlies.
Please remember this doesn't work on Oxygen to my knowledge,Designed for CM13 builds.
UPDATED 8-27-2016
PLEASE TAKE NOTICE:
VER2 = "MOVED TO /PRIV-APP from /APP" ----removed---- now installed as an apk file
8-28-2016 (current as of nightly of same date)
REMOVED AND MADE CAMERA SEPARATE FROM ZIP .
AND ALL PREVIOUS ZIPS AND PROJECTS PERTAINING TO SNAPCAMERA PROJECT
*** HAS SINCE BEEN DISCONTINUED AS 8-28-2016**
I HAVE ELECTED TO KEEP THE SNAPCAMERA SEPERATE FROM THE REST OF ZIP DUE TO THE FACT THAT IT IS EASIER TO MAINTAIN AND UPDATE AND DECIDED TO HAVE THE ZIP CONSIST OF JUST THE LIBS NEEDED FOR PROPER FUNCTION OF SNAP CAMERA AND THE ADDON.D NEEDED FOR THEM.
SO BELOW WILL CONSIST OF:
1- REMOVER THAT WILL REMOVE EVERYTHING IN ZIP SUCH AS ADDON.D ,THE LIB FILES AND ANY PREVIOUSLY SUPPLIED CAMERA I HAD INCLUDED IN THE PAST. -FLASHED IN RECOVERY
2- INSTALLER THAT WILL INCLUDED PROPER LIBS AND ADDON.D AND PERMISSIONS -FLASHED IN RECOVERY
3- CAMERA.APK FILE WHICH WILL BE AN APK FILE OF CAMERA AND INSTALLED THROUGH FILE-MANGER
INSTALL
1. download Snap-libs.zip , camera.apk and the remover.zip to your device
2.flash remover.zip in recovery
3. flash zip in recovery.
4.Install APK through file manager
5.and reboot device
REMOVE
flash remover zip. in recovery
uninstall APK through File Manager
please note:
If you are on current cm13 Nightlies or a Device that has SnapCamera already or on rom with a custom camera hal this is not for you.
8-28-2016
THIS IS MOST LIKELY THE FINAL UPDATES FROM ME FOR THIS CAMERA SINCE NOUGAT IS RIGHT AROUND THE CORNER AND AS OF RIGHT NOW I HAVE NO PLANS TO CONTINUE THIS PROJECT OVER ,IT MIGHT CONTINUE TO WORK ON THE LOS 14+ BUT NO GUARANTEE,THERE WILL NOT BE ANYMORE UPDATES UNLESS I COME OUT OF RETIREMENT AND POST ANOTHER APK OR ZIP WITH CAMERA INCLUDED AT A LATER DATE ,FOR NOW JUST FLASH THE LIBS.ZIP AND INSTALL APK..
8-28-2016
PLEASE FLASH THE REMOVER .ZIP IN RECOVERY PRIOR TO INSTALLING THE LIB.ZIP AND APK .
8-29-2018
This thread and project is now closed and no longer monitored
[APP] [CM13][MOD]CameraNext,GalleryNext
4-29-2018
This thread and project is now closed and no longer monitored
SEE POST 116 FOR NEWEST FROM COS13
THE APKS BELOW THAT ARE DOWN AT BOTTOM OF OP WORK, BUT THEY ARE OLDER AND NO-LONGER SUPPORTED .
I will be removing and closing this POST 2 soon!!!!!
CAMERANEXT AND LIBS ETC.
PLEASE READ THROUGH ENTIRE OP BEFORE ISTALLING , POSTING OR COMMENTING DESIGNED FOR THE ONEPLUS ONE NOT GAURANTEED TO WORK ON OTHER DEVICES BUT HAS BEEN SAID WORKS ON MANY OTHERS.......I CAN ONLY SAY TRY IT AND SEE...BUT CANT SUPPORT OTHER DEVICES.
(NON CM BASED ROMS AND ROMS WITH CUSTOM CAMERA HALS ARE ALSO NOT SUPPORTED HERE.)
PLEASE RESPECT AND ASK PERMISSION FIRST AND AFTER PROPER PERMISSION IS GIVEN, THEN GIVE CREDIT/MENTION BEFORE USING OR POSTING PARTS OF MY ZIP IN OTHER MODS AND ZIPS SUCH AS MY ADDON.D OR SCRIPTS OR ANY PART OF THIS ZIPS.
IF I FIND ANY PARTS OF MY ZIPS YOU WILL BE CONTACTED THEN REPORTED AND SHAMED..
Stock-CameraNext , GalleryNext and libs from cos12 working on cm12.1/13 below at bottom of this post 1 (OP)
See post 116 for Latest Cyanogen CameraNext and GalleryNext From COS13 for cm13 Thanks @thecoolkid
See post 3 for Modded Cameranext V10 AND V22 for CM13 . Original Mods by abhi08638
See post 5 for HTC Camera and Gallery for cm13
FYI I fixed a few things
Power Shutter and Panorama should work now in my camera below ,if you flash the new libs in the new installer I added.
There is some roms that features will be limited due to customization's of the rom itself.This I cant change . I was told Sultans has such customization`s. These are tested on latest cm13 nightlies and should still work on other roms and phones but features will be limited.
You will have to flash the new installer .zip prior to installing the camera.
if you are using the modded version from abhi08638, on his thread and panorama is your only issue then this should fix it.
FYI -no 4k recording mode in stock (COS12_CameraNext-CM13-jgcm-signed)
No 50mp Clear Image Mod in the stock(COS12_CameraNext-CM13-jgcm-signed)
BTW:I f you don't have a scene such as beauty mode available then I am pretty sure your camera or customizations in rom doesnt support it .They all work for me in the CM13 nightlies.
.
READ THREAD CAREFULLY BEFORE DOWNLOADING AND USING PLEASE.IF YOU READ THE THREAD CAREFULLY ,YOU SHOULDN'T HAVE ANY ISSUES THAT ISNT ALREADY STATED IN THE OP.
These are ALL Currently working on the Official CM13 Nightlies and Most CM based Roms only 6.0 (MM) .See Bottom of post for Zips and Apk(s
IMPORTANTIf anyone downloaded the installer and uninstaller files OR cameras below BEFORE 3/21/2016 or in "post 720" be sure to just delete them and use the new ones. The new ones have new names and updated scripts so there is no confusion. uninstall the previous camera before installing the new one please..
The installer will add the lib files needed for this camera to work correctly .(should also work for MODDED VERSIONS)
I ALSO CREATED AND ADDED AN ADDON.D FILE (99-Univ_Cam_libs.sh) SO IT WILL SURVIVE UPDATES,HOWEVER IF YOU WIPE SYSTEM MANUALLY SUCH AS IN RECOVERY YOU WILL NEED TO RE-FLASH THIS INSTALLER JUST LIKE GAPPS AND YOUR ROM.
PLEASE ASK PERMISSION OR GIVE CREDIT BEFORE USING OR POSTING ANY PARTS OF MY ZIPS IN OTHER MODS AND ZIPS SUCH AS MY ADDON.D OR SCRIPTS. (I PURPOSELY LEFT THE CAMERA OUT OF MY ZIP FILE TO ALLOW YOU THE CHOICE TO INSTALL EITHER STOCK OR MODDED APK SEPERATELY BASED ON USER PREFERENCE).
the CAMNEXT_LIBS_ADDOND-REMOVER-jgcm-VER3 will remove these files ( libs and addon.d file )
BUT NOT CAMERA----CAMERA NEEDS TO BE REMOVED USING UNINSTALL FEATURE IN DEVICE.
The apk `s just gets installed and uninstalled like any other app .. use Settings-Apps on phone to uninstall
please noteif you using or used my camera and libs and you want to try or use another cameranext from someone else be sure to run my REMOVER before installing that camera from a different source. My addon.d needs to get removed. Or you can manually remove 99-Univ_Cam_libs.sh - from system/addon.d using file manager
*** SEE FILES BELOW FOR DOWNLOADING AND INSTALLING BELOW ***
Please ReadI will be removing and closing these soon!!!!!
Please read the op in its entirety becasue, I will not nor am I inclined to change,modify this project so kindly take it or leave it .If there is any features not working or things you wish to have added this will not happen by me...The known issues have been described in the op.and I have spent time trying to resolve them.So just repeating over and over what works and doesnt work will be waste of time IMO. ..This is a work around to get this on cm13. But , I am hoping there will be a new update for cos13 compatible version of this camera,which will resolve most ongoing issues.pretty much everything works as it is right now.
Dont bother asking me why a feature is missing or something isnt working if you know you are on a rom that isnt based on cm or uses different sources and libs or a different camera hal or not on a OnePlus One!
the cameras will NOT work correctly on cm13 without the libs- installer zip below.
REMEMBER it will not work correctly without the flashable zip below.(CAMNEXT-LIBS-ADDON-INSTALL.zip - is needed to allow survivability and supply libs needed for camera. they should also work with cameranextmod.)
1. COPY COS12_CameraNext-CM13-jgcm-signed.apk, COS12_GalleryNext-CM13-jgcm-signed.apk AND CAMNEXT-LIBS-ADDON-INSTALL.zip TO YOUR PHONE
2. FLASH CAMNEXT-LIBS-ADDON-INSTALL.zip IN RECOVERY
3. INSTALL COS12_CameraNext-CM13-jgcm-signed.apk and COS12_GalleryNext-CM13-jgcm-signed.apk through a FILE MANAGER
QUICK THOUGHT:
I HAVE BEEN GETTING MESSAGES FROM OTHER USERS THAT PARTS OF MY ZIPS SUCH AS MY( 99-Univ_Cam_libs.sh ) ADDOND.D FILES ,EMBEDDED SCRIPTS AND OTHER PARTS ARE POPPING UP IN OTHER ZIPS IN OTHER FORUMS AND THREADS. I AM FINE WITH SHARING WORK WITH COMMUNITY OR MODIFYING MY ZIPS FOR PERSONAL USE ,BUT PLEASE DONT POST THEM WITHOUT PERMISSION OR GIVING PROPER CREDIT TO MYSELF OR ANY OTHER ORIGINAL DEVELOPERS OR MODDERS.
PLEASE SHOW YOUR SUPPORT CONTRIBUTIONS WELCOMED
Help us who are fighting Hodgkin's lymphoma (Hodgkin's disease) www.lls.org
8-27-2016 -UPDATED SCRIPTS IN ZIPS (NO CHANGES TO CAMERA OR GALLERY APK FILES)
8-28-2016-THERE WILL BE NO MORE UPDATES TO THIS CAMERA AT LEAST BY ME
4-29-2018
This thread and project is now closed and no longer monitored
CameraNext Modded CM13
4-29-2018
This thread and project is now closed and no longer monitored
Outdated!! No longer Supported!
I will be removing and closing this POST 3 soon!!!!!
MODDED (OUTDATED)Here is those modded versions compatible for cm13 . it is V10 version and V22 version of the mod.
They are currently working with CM13. (not sure if they are 100 percent compatible)
Dont forget to flash my cameranext libs installer in the OP .
There is no support by me on these modded versions.
I am adding these only to satisfy user preference But I prefer the Stock over any of these myself.
Original Mods by abhi08638
Supported threads are at V10 Thread and V22 Thread
remember these are apk file and are installed just like any other app. ( file-manger)also
Dont forget to flash my CAMNEXT LIBS AND ADDON.D installer in the OP BOTTOM OF 2ND POST
Outdated!! No longer Supported!
I will be removing and closing this POST 3 soon!!!!!
8-27-2016 No changes made, just cleaned thread and removed and re-posted apk files.
8-28-2016-THERE WILL BE NO MORE UPDATES TO THIS CAMERA AT LEAST BY ME
4-29-2018
This thread and project is now closed and no longer monitored
Great camera! Thank you!
---------- Post added at 09:56 PM ---------- Previous post was at 09:54 PM ----------
Recognized some bugs:
1. Camera app fc after enabling power shutter option
2. Letterbox viewfinder not working on front camera
HTC CAMERA AND GALLERY for cm13
Outdated!! No longer Supported!
I will be removing and closing this POST 5 soon!!!!!
HTC GALLERY AND CAMERA
Here is the HTC CAMERA AND HTC GALLERY currently tested and working on cm13 Nightlies
Not sure if panorama is working .
HTC CAMERAS
Removed while troubleshooting issues of camera
HTC GALLERY
HTC Gallery 9.22.668813 - (NEW)
HTC Gallery 9.02.850719 - (OLD)
just adding in case anyone wants to try them.
Install and remove just like any other apk.
Outdated!! No longer Supported!
I will be removing and closing this POST 5 soon!!!!!
Hi,
I've got a Zuk z1, and I've installed the cameranext mod downloaded from other post, now I've read that for active beauty mod I need make something with lib files,
What I need to install furthermore http://forum.xda-developers.com/attachment.php?attachmentid=3230763&d=1427405200
cojona2015 said:
Hi,
I've got a Zuk z1, and I've installed the cameranext mod downloaded from other post, now I've read that for active beauty mod I need make something with lib files,
What I need to install furthermore http://forum.xda-developers.com/attachment.php?attachmentid=3230763&d=1427405200
Click to expand...
Click to collapse
not sure I understand the question. Beauty Mode should work with this camera on cm13 based rom and using OPO
I dont think these lib files will fix beauty mode if it isnt working now . this camera in this thread is specific to cm13 based roms and for OPO.I dont think these libs will work for the modded version in your link either,but you can try them.
I re-added the modded version from my post in that other thread.please read the op .especially the known issues before commenting. My participation in the threads the next few days will be very limited at best.
Is Panorama working in the modded version for anybody with those libs , I know all of these cameras have issues or features missing in sultans roms. I have a little time tonight,So I am wanting to update the OP .I am looking for some feedback on what works and what doesn't and please mention which Camera and rom you are using please so I can gather a little data so I can look into it tonight.
See OP
thanks, man! i just installed cm13 nightly 15-02-2016 and previous versions didn't work. But i just installed Modded-Cameranext-MM-jgcm-signed.apk and it works great. 4k video and custom shutter time also.
@jgcmurray,Very COOL Man!
Good job!
Just installed this. Seems to work fine on Sultans CM13 rom ... except you have to put the variable shutter speed to 'off'.
But I can't seem to make the 'power shutter' working. Anyone else have this?
working 50MPs ?
MexiDroid said:
working 50MPs ?
Click to expand...
Click to collapse
Sorry no 50mp clear image mod
Thanks! modded cameranext working on SAOSP ROM :good:
But unfortunately slow-motion video not work..
Is the version of camera next 2.0.004 cee4e8702d-30?? this is the last version on the oficial ROM COS.
Working Well Thanks..
need 50mp clear image mod
Haiqal Johari said:
Great camera! Thank you!
---------- Post added at 09:56 PM ---------- Previous post was at 09:54 PM ----------
Recognized some bugs:
1. Camera app fc after enabling power shutter option
2. Letterbox viewfinder not working on front camera
Click to expand...
Click to collapse
are you sure your using the camera I have in the OP ,Stock_CameraNext-cm13-jgcm-signed.apk ? There was that issue with the one I posted the from a while back.But the one I just mentioned should work fine.
Dont forget to uninstall the one you have now first.There is also a newer libs file in the OP .Any questions Just read the OP in its entirety and there shouldn't be anymore questions.
Related
Hi!
This topic is about real ICS development for Mini.
This topic is only for developing at this moment!
Please, keep this topic clear! I'll answer only for questions about developing or CM9 for Mini. About others, please write to me at PM!
IF YOU WANT TO USE MY WORK, YOUR WORK MUST TO BE OPEN SOURCE TOO!!!!!
Team:
Macław
bagnz0r
tom3q
marcin1147
djsky2011
squadzone
Special thanks:
phiexz
Thanks for all donators. Thanks to you we can provide frequent updates without any problems!
DOWNLOAD: CyanogenMod 9.0.0-RC0-GT-S5570-GalaxyICS-KANG-beta7
I CAN USE EVERYDAY, BUT YOU SHOULD DO FULL CWM BACKUP BEFORE YOU FLASH IT!
SOURCES:
non working link removed
DOWNLOAD:
removed due to no GPL compliance
NO MIRRORS!!!
DISCUSSION TOPIC:
http://forum.xda-developers.com/showthread.php?p=23493211
Working:
boot
GSM (phone/messages/GPRS/EDGE/3G)
Wifi
Bluetooth
HW acceleration (full)
Sound
Headphones
GPS
All sensors (proximity, roration etc)
CyanogenMod settings (not all, it's not fully merged by CyanogenMod team, not my fault)
Market (now you can download all apps available for Gio with GB)
Fixed animations (now it looks so good)
Facebook sync
Buttons backlight
BLN support
GMail fully works
Browser fully works
ICS keyboard
Games - works as smoothly as on Gingerbread
YouTube
Deep sleep
Wifi signal indicator
Native Android mass storage
Without flickering
Almost working HW video acceleration
Smooth YT (LQ right now)
Live Wallpapers
Not working/Known bugs:
If you find any bug or you want to see what bugs has this rom, go there.
If you have problems with WIFI, you must to apply that patch:
link removed, non gpl compliant.
To get FM radio working, you must to install Spirit FM app and then go to:
Settings=>Region frequency=>Europe
Settings=>Audio=>Method=>msm7x30 Si5500
CHANGELOG:
-----beta7
New Adreno200 libraries for ICS
Fast and smooth system
Live Wallpapers working - won't slowdown your system, like on Gingerbread! (I'm using Phase Beam, it's beautiful)
Gallery and calculator fully working all the time
Gmail working without any problem
Browser working really good (smooth and fast)
All apps with graphic problems, like Poweramp, now working without any
Updated AOSP/CM9 sources
(development info) New gralloc and hwcomposer
Updated Macław's audio libriaries
FM seems to be working
-----beta6
Android updated to 4.0.4
Clean CyanogenMod - we're using only CM9 sources with our device sources!
Super smooth system
Smooth windows animations
New phone lock animation
Hardware acceleration on most video formats (not all)
Smooth videos on YouTube (LQ only right now)
Fully working deep sleep (all the time when BT is disabled)
GSM fully works (signal indicator/mobile data/phone calls/messages etc.)
Updated GoogleApps
Temporary removed CRT screen-off animation (will be back in beta7)
-----beta5
Flickering is gone
Working native mass storage (no need for annoying UMS app again)
Updated CM sources
New kernel, updated to 2.6.35.7perf-CL945787
Smoother than Gingerbread
Really good system performance
Improved GPU performance
Removed UMS app
-----beta4 - Macław and Mikegapinski build
First release for Galaxy Mini
Deep sleep working - happy battery ;-)
Wifi indicator fixed
Fixed BT issues
Bluetooth headsets support
BLN support for all devices
Updated kernel [Macław]
Reduced flicker, but still exists
Soooo smooth
Added working GalaxyICS app - you can update your CM9 directly from your device
Of course updated CM9 sources
-----Nigthly 02-03-2012 - Macław and Mikegapinski build
From user view:
Base video acceleration - BUT STILL NOT FULL
Really improved performance
Small battery life improve
Added a lot of Qualcomm hardware libraries, which making CM9 stable and smooth
Still flickering, but you won't see it in everyday use
Updates in my famous libaudio
From developer view:
Rebuilded device sources
Cleaned config sources (no more use external hardware sources, small fixes on framework, nothing else!)
Included base video acceleration - but videos is still laggy
New, rewrited libgralloc
Removed unsused libcopybit
Finally with enabled QCOM_HARDWARE flag
Compiled with all of QCom stuff
Clean base Android sources - only needed changes in GalaxyICS config
-----Beta 3
Working GalaxyICS app - news about project and updates directly from your phone!
Added CM9 bootanimation
Fixed all apps, which using webcore (Facebook, Gallery etc.)
Fixed wrong text at wrong place
Fixed some issues in Phone.apk
Fixed user-agent in default Android browser
Latest CM9 sources - CM Settings, like percent battery indicator, finally working
Readded CM9 Music Player
Performance boost
-----Beta 2
Improved battery live
Working browser with full GPU acceleration and saving pages functionality
Working Gallery
Working GMail
Fixed CPU sleep when screen is off
Less flickering
-----Beta 1
Full HW Acceleration - smooth Trebuchet
YouTube fixed (temporary laggy)
Backlight works
New libaudio, rewritted from begining [Macław]
Some changes in framework
Updated sources
All headsets works
Temporary GMail and stock browser doesn't work propertly (graphic glitches, will be fixed)
-----Alpha 3
Fixed ICS keyboard
GMail fully works
Browser fully works
Performance boosts
Flickering is almost gone!
Merged with ICS-ACE project
New kernel [marcin1147]
Updated CM9 sources
Removed unused apps
----- Alpha 2
Fixed animations! Now it's working better than GM9
Market fixed, now you can download all apps available for Gio with GB
Calendar fixed
SetupWizard is working
BLN support
performance improved
Superuser binaries and app updated
Included Google Apps
----- Alpha 1
first CM9 for Gio release, based on original CM9 sources
placeholder3
First of all.... Thanks Maclaw for considering our galaxy mini too.
I can understand all you want to say thanks but, that will make this thread look buggy and spam the thread and thus, make it less useful. So, why not just press the thanks button.
Moreover, YOU can ask your general questions at this thread :
http://forum.xda-developers.com/showthread.php?t=1539729
Beta4 tomorrow ;-)
Guys, I know you are excited, but cmon, 50 useless posts?
You want to say thanks, click the thanks button
You want to contribute, sources are up
You want to support donate to the OP
But under no circumstance spam a development thread with unuseful posts!!!, that will only slow down development. Let developers do their job ok?
Thread cleaned!!!
Sent from my GT-I9100 using xda premium
[*INSTRUCTIONS:-(I AM NOT RESPONSIBLE IF YOUR PHONE GETS BRICKED)
FIRST DOWNLOAD CyanogenMod 9.0.0-RC0-GT-S5570-GalaxyICS-KANG-beta7 ZIP AND GAPPS.
Place the zip files into your Sdcard.
Reboot your phone into CWM(clock work recovery mode)PRESS POWER BUTTON+MENU BUTTON
Wipe your cashe,data,go to advanced and wipe Dalvik cache and battery stats.
Now go to install zip from sd-choose zip from Sdcard-then select the zip file(CyanogenMod 9.0.0-RC0-GT-S5570-GalaxyICS-KANG-beta7)] which you placed it in the sdcard.
It takes hardly 4 to 5 mins. now wipe cashe and data.
Now Flash the gapps zip .
Restart your phone.
Note:-First boot takes much time (after installation)
See below.
D.O.C said:
I dont know if these are official thread, but they are definetively discussion threads about cm9 and not development threads.
[General] [Q&A] Cyanogen Mod 9 Beta 4 For GT-S5570 : For all your questions.
*CyanogenMod 9 Discussion Thread*
If you do not develop, go to one of the above, please.
Once again, thread cleaned.
PD: I will close one of the above threads (probably the one not being updated in the OP, unless maclaw or any team members open up an official one or decide to keept one, no point on having two of the same, your choice.
Click to expand...
Click to collapse
I have opened my own discussion topic, please, close the both you mentioned.
There's my discussion topic:
http://forum.xda-developers.com/showthread.php?p=23493211
I have test package, if somebody can test it, please, try it:
http://maclaw.galaxyics.com/cm_tass-ota-eng.maclaw.zip
I need quick test, I have only one hour!
Please, try to make call. If everything will be ok, you'll get beta4 today.
ill test oki finally release and i think it will work well cause anything you release works well but how to install it? need to clear dalvik cache? reset factory?
Wipe data (factory reset)
ok alredy downloaded now goin to flash it
---------- Post added at 07:03 PM ---------- Previous post was at 07:00 PM ----------
flasing nowww
aaand
Sent from my GT-S5670 using Tapatalk
cant even flash the zip...??
renersed for future. still installing
i will post newest screenshot here
What working: boot loop (sorry)
=>solution: try other kernel
logcat not working
Ok, so if it'll work, you'll get beta4 in the evening.
how can u install it
---------- Post added at 07:15 PM ---------- Previous post was at 07:13 PM ----------
installing:/sdcard/cm_tass-ota-eng3.zip
Finding update package
opening update package
installing update
installation aborted..
---------- Post added at 07:16 PM ---------- Previous post was at 07:15 PM ----------
mhm... time to flash back gingerbread with odin
lokenok said:
how can u install it
---------- Post added at 07:15 PM ---------- Previous post was at 07:13 PM ----------
installing:/sdcard/cm_tass-ota-eng3.zip
Finding update package
opening update package
installing update
installation aborted..
Click to expand...
Click to collapse
Check if you downloaded file successfully by extracting it with winrar.
Presenting, MicroDelta stock based JB 4.1.2 ROM (P3110XXDME3) for the Samsung Galaxy Tab 2 P3110 and P3113 (see addons for more information on P3113 infrared support). There are no performance enhancing init.d scripts or system tweaks applied to this ROM. Everything should be as close to stock as possible. All customizations for this ROM will be provided below as independent addons.
JB 4.1.2
Deodexed
Zipaligned
Busybox 1.20.2r2 with statically linked binary (Resource: https://code.google.com/p/yangapp/downloads/detail?name=busybox-1.20.2r2)
Superuser 1.0.1.8 by ClockworkMod is now default superuser application. This version is chosen because it is fully working, free, and open source. Resource: https://play.google.com/store/apps/details?id=com.koushikdutta.superuser ** Note** XXDMA2 release uses SuperSU 1.25 (Resource: http://forum.xda-developers.com/showthread.php?t=1538053)
Kernel init.d support added to stock ramdisk. Note: The init.d support in this ROM is triggered by a patch to init.rc in the ramdisk (instead of the alternate "install-recovery.sh" init.d trigger method). The alternate "install-recovery.sh" init.d trigger method is not used in this ROM because it can conflict with the init.d support provided by other custom kernels and cause the init.d scripts to be executed twice.
Note: The modified version of Google Play Store is now supplied separately with latest release (XXDME3). See attachments below for flashable zip to install this version of the modified Play Store. Google Play Store 3.4.7 (/system/app/Phonesky.apk) added and modified to skip automatic internal self update (Google has permanently disabled Ti Backup's ability to attach and detach applications in the Play Store after version 3.4.7, so the Google Play Store has been modified to not internally update itself automatically without notification or permission). Resource: http://forum.xda-developers.com/showthread.php?t=1580827
Startup and Shutdown sound files renamed with "bak" extension to prevent execution (these two sound files can be changed back to their original names to enable the default startup and shutdown sounds again).
/system/media/audio/ui/PowerOff.ogg
/system/media/audio/ui/PowerOn.ogg
Sysro and sysrw scripts added to /system/xbin for easy command line interface.
No default applications have been removed from this ROM. I find it safer to use Ti Backup and freeze the applications that I do not want to use, instead of removing them. Here is a list of the applications that I recommend freezing with Ti Backup in this ROM:
AllShare Play
AllShare Service
ChatON
Game Hub
Google Play Magazines
Google Play Music
Kobo
Music Hub
PressReader
Readers Hub
S Suggest
Samsung Apps
Samsung Push Service
Software update
Video Hub
Zinio
Notes on Tablet UI:
For the "Tablet UI", I recommend using Xposed Framework. Resource: http://forum.xda-developers.com/showthread.php?p=24267797
After setting up Xposed framework, install the "TabletUI" and "App Settings" Xposed modules. Activate both Xposed modules and use the App Settings Xposed module to control the DPI of the SystemUI (with a range of 134 to 160 DPI). Any DPI setting for the SystemUI that is lower than 134, while the TabletUI Xposed module is also activated, will cause the SystemUI to report an error. DPI 145 seems to be optimal size because this is as low as it can go before the long press on the home button works with Google Now.
Tablet UI Xposed module: http://www.villainrom.co.uk/forum/threads/tabletui-trigger.5527/ or http://forum.xda-developers.com/showpost.php?p=41583916&postcount=84
App Settings Xposed module: http://www.villainrom.co.uk/forum/threads/app-settings.5486/ or http://forum.xda-developers.com/showpost.php?p=41891726&postcount=116
Xposed Module Homepage: http://www.villainrom.co.uk/forum/forums/xposed_framework_mods/
You must use Xposed Framework >= v2.1.4 (along with the TabletUI module) for this to work properly with this ROM.
Notes on custom kernels:
This ROM should work as a good base for testing custom kernels. There are many to choose from, but the KK Boot image works very well (thanks ketut.kumajaya). Reference: http://forum.xda-developers.com/showthread.php?t=1855700
Recommended Installation:
** If you are already running a stock 4.1.x ROM, then there is no need to wipe the data/cache. Just flash over the top of the previous installation without wiping.
** If you are currently using an AOKP or CM based ROM, then a wipe of the data/cache after installation is required.
Thanks:
Special thanks to everyone here on XDA that helped me put this together. Attached below is a text file (MicroDelta-P3110-JB-4.1.2-P3110XXDME3.txt) with the MD5 and link to the ROM. I have also attached a few custom MicroDelta (and alternate Deltadroid) bootanimations and wallpapers for your Home and lock screen. Enjoy.
Additional Addons:
Attached below is also a ClockworkMod flashable zip (MicroDelta-JB-4.1.2-P3110XXDME3-stock-kernel-init.d-bootanimation-signed.zip) of the stock kernel with init.d support plus additional custom bootanimation support. The kernel package also comes with a custom MicroDelta bootanimation which is installed to /system/media/bootanimation.zip. Note: This kernel package with bootanimation support will also work with a P3113. Edit: Added alternate bootanimation with kernel called Deltadroid.
Additionally, attached below is a text file (MicroDelta-P3113-JB-4.1.2-P3113XXDME3.txt) that contains the MD5 and link to a ClockworkMod flashable zip for P3113 support. The flashable zip will modify build.prop on the MicroDelta ROM so that Settings->About will display the correct P3113 model number. Also, this flashable zip will install the Peel Infrared support for the P3113. Flash the zip over the top of the P3110 MicroDelta ROM to install.
The extended 4-Way Reboot menu modification has been added below as a flashable ClockworkMod zip. This modification alters android.policy.jar and integrates the extended reboot menu into the system. Credits to kahvitahra for posting a howto.
In addition to the 4-Way Reboot menu modification, the Back2Kill mod is also available for android.policy.jar (allows you to long press the back key to kill current running applications). This modification is combined with the 4-Way Reboot Modification because both of these modifications are changing the same file. Credits to Mirko ddd for posting a howto.
The Ripple lockscreen has been added below as a flashable ClockworkMod zip. This modification alters framework-res.apk and services.jar to integrate the Ripple lockscreen. Credits to txr33 for posting a howto.
The stock video player also comes as an addon with transparent control buttons (play,ff,rw) and support for bluetooth control (pause,ff,rw,next track,previous track).
Provided below are three different options for altering the user interface (for both p3110 and p3113):
1) JB-black-statusbar-icons: change the Touchwiz status bar to black and the status bar icons to the default Jelly Bean icon set for the wifi, battery, and bluetooth. Also, change the notification panel to a black background with Jelly Bean blue accents. Works in PhabletUI and TabletUI.
2) JB-nominiapps-black-statusbar-icons: Same as option #1 plus removes the mini applications "arrow" that exists in the middle of the navigation bar (so that the TabletUI modification has more room for the soft keys). Works in PhabletUI and TableUI.
3) JB-nominiapps: Keep the default Touchwiz status bar and icon set. Only remove the mini applications "arrow".
All MicroDelta 4.1.2 Roms and modifications can be found here:
MicroDelta 4.1.2 File Repository
Screenshots of PhabletUI and TabletUI:
Thx for this rom ,finally a update I used the last 3 month Expressorom , but now there is 4.1.2.
Until now no problems at all.
But will Playstore takes updates in the near future or not?
Thx
:good:
The Play Store is just patched so it will not try to automatically update itself to a newer version without asking you first. All your applications and games should update without problems using the older version of the Play Store, although, you can install any version of the Play Store on top of the version that this ROM comes with. The thread is referenced above for newer versions of the Play Store that are also patched to not automatically update themselves.
You also have the option of downloading a current unpatched copy of the Play Store and it will go back to automatically updating itself to newer versions without asking.
Although, Google Play 3.4.7 gives Ti Backup the ability to attach or detach modified apk files to the market so I can choose what things I want to update or not. This way I can pin specific versions of apps or games in the Play Store.
Tsjoklat said:
The Play Store is just patched so it will not try to automatically update itself to a newer version without asking you first. All your applications and games should update without problems using the older version of the Play Store, although, you can install any version of the Play Store on top of the version that this ROM comes with. The thread is referenced above for newer versions of the Play Store that are also patched to not automatically update themselves.
You also have the option of downloading a current unpatched copy of the Play Store and it will go back to automatically updating itself to newer versions without asking.
Although, Google Play 3.4.7 gives Ti Backup the ability to attach or detach modified apk files to the market so I can choose what things I want to update or not. This way I can pin specific versions of apps or games in the Play Store.
Click to expand...
Click to collapse
Thx for the reply ,i know enough :good:
smartidoos said:
Thx for the reply ,i know enough :good:
Click to expand...
Click to collapse
Rom still perfect after.:good:
Will this work for p3113?
Sent from my One X using xda premium
Thread added to Repository of P31XX
inphamous36 said:
Will this work for p3113?
Sent from my One X using xda premium
Click to expand...
Click to collapse
It will work, but the infrared software will be missing. This weekend I should have some time to look at the differences between the P31XX firmwares.
Tsjoklat said:
It will work, but the infrared software will be missing. This weekend I should have some time to look at the differences between the P31XX firmwares.
Click to expand...
Click to collapse
So if i don't use the IR blaster i could use the p3110 version of every ROM?
Sent from my One X using xda premium
inphamous36 said:
So if i don't use the IR blaster i could use the p3110 version of every ROM?
Sent from my One X using xda premium
Click to expand...
Click to collapse
The p3110 and p3113 system partitions and kernels are exactly the same except the p3113 has the additional infrared hardware and software. The ROM posted here will install a new kernel and format and install a new system partition where all of the programs are located. But, a different ROM could install, format, replace, other partitions that are not compatible amongst the various model types. For example, a bootloader from a p3110 would never work with any other device. What I'm saying is that you always have to know what partitions the ROM is going to replace, because some of the other partitions are not compatible across other device models.
I was thinking that since the system partition in the p3110 firmware is so close to the system partition in the p3113 firmware, that I could pull the infrared software off the old p3113 firmware and use it on the newer p3110 firmware.
MicroDelta P3113 Support
For P3113 users that would like to try this MicroDelta ROM but add additional infrared support and make it display the correct model number:
I added a text file to the OP that contains the MD5 and the link to a ClockworkMod flashable zip that will fix build.prop of the MicroDelta ROM that I posted in the OP so that Settings->About will display the correct P3113 model number. Also, the Peel Infrared support will be installed for the P3113. Please let me know if this helps. I do not have a P3113 so I can not fully test this, but it should be ok.
At the time of this writing, the latest official ROM for the P3113 is version 4.1.1. This addon should make a fully functioning 4.1.2 custom ROM with infrared support for the P3113.
Instructions for P3113 users: First, install the MicroDelta P3110 ROM from the OP then install this addon over the top to add P3113 support.
Tsjoklat said:
For P3113 users that would like to try this MicroDelta ROM but add additional infrared support and make it display the correct model number:
I added a text file to the OP that contains the MD5 and the link to a ClockworkMod flashable zip that will fix build.prop of the MicroDelta ROM that I posted in the OP so that Settings->About will display the correct P3113 model number. Also, the Peel Infrared support will be installed for the P3113. Please let me know if this helps. I do not have a P3113 so I can not fully test this, but it should be ok.
At the time of this writing, the latest official ROM for the P3113 is version 4.1.1. This addon should make a fully functioning 4.1.2 custom ROM with infrared support for the P3113.
Instructions for P3113 users: First, install the MicroDelta P3110 ROM from the OP then install this addon over the top to add P3113 support.
Click to expand...
Click to collapse
Thank you! Will report back how well it works i don't usually use Infared but i can test it for you
Sent from my One X using xda premium
---------- Post added at 10:28 PM ---------- Previous post was at 10:16 PM ----------
Wait, where is download link?
Sent from my GT-P3113 using xda premium
inphamous36 said:
Thank you! Will report back how well it works i don't usually use Infared but i can test it for you
Sent from my One X using xda premium
---------- Post added at 10:28 PM ---------- Previous post was at 10:16 PM ----------
Wait, where is download link?
Sent from my GT-P3113 using xda premium
Click to expand...
Click to collapse
The download link and the md5 are contained in a text file that is attached to the first post. http://forum.xda-developers.com/attachment.php?attachmentid=1879405&d=1365816454
thanks for testing.
I didn't realize that the free public sharing bandwidth on Rapirshare was so low. I will probably need to find a better host for these files because I think the daily limit is used up pretty quickly. I guess the p3113 support is working ok because I haven't heard any problems so far. Thanks.
I added an alternate lock screen/wallpaper (Deltadroid-600x1024.zip) and bootanimation kernel package (Deltadroid-JB-4.1.2-P3110-stock-kernel-init.d-bootanimation-signed.zip) for this ROM.
Great ROM
Btw, what others tweaks do you recomend (if any) to your ROM?
I would recommend testing this with the KK boot image if you feel like testing the cutting edge. Thanks.
How are you able to get IR to work? I must know.
Luigi2012SM64DS said:
How are you able to get IR to work? I must know.
Click to expand...
Click to collapse
The IR software works because it is looking for the stock ROM framework which is included.
Actual:
I use CyanogenMod and Mokee teams sources and add some changes to device config.
Latest CM12 builds
СМ12.1 build 24.07.2015
normal- https://yadi.sk/d/l0sQrKeXi4rpT
experimental - https://yadi.sk/d/Sus83ATLi4rjv (aptx bt, mako gps)
news: - kernel, config updates . SoundControl removed, revert to deodex.
revert cm12.1 BT - https://yadi.sk/d/DHjDF-fAi4sQE
СМ 12.1 build 21/07/2015
normal - https://yadi.sk/d/EwsQB88Qhz7RD
experimental - https://yadi.sk/d/X07SjR3Fhz7Rm (GPS from nexus4, APTX BT)
+fixed updater-script - added ifelse(is_mounted("/system"), unmount("/system"));
СМ12.1 build 13.07.2015 - https://yadi.sk/d/CtPkfkpchq2Yb
СМ12.1 build 13.07.2015 w aptx support(experimental) - https://yadi.sk/d/LRV6F7N2hq2bS
fixed: wifi, BT, boot light, recovery, offline charging
Cm 12.1 03.07.2015 build - https://yadi.sk/d/GG3gFTtYhe3dQ
Changes in kernel, libs, binaries, configs
Tested - worked/
CM12.1 11.06.2015 build - https://yadi.sk/d/VyIKm27xhCdhE
CM12.1 20.05.2015 build - https://yadi.sk/d/WnR7d73mgkzcX
CM12.1 28.04.2015 build - https://yadi.sk/d/bn_IsRx1gJaRs
kernel w soundcontrol v3, many kernel and ril updates from см team
CM12.1 20.04.2015 build - https://yadi.sk/d/xiKPp0EBg7Kyo
kernel w soundcontrol v3, updates from см team
gps libs from мако(nexus 4) (possible gps work better) for recovery - https://yadi.sk/d/JU39SUbPg7Kmu
PAC 5 20.04.2015 build from neosuslik - https://drive.google.com/uc?id=0B6kPZoGYA4tfaFhOdjIxenNYbnM&export=download
Mokee 5.1 12.04.2015 build from neosuslik - https://docs.google.com/uc?id=0B6kPZoGYA4tfSGdlNldodnhuVTQ&export=download
CM12.1 build(06.04.2015) tested - https://yadi.sk/d/bzBHxTDmfoyck
move apps to sd fix added, dual recovery
kernel w SoundControl v3 for cm12.1 - https://yadi.sk/d/xPWTpM4ufpgnA - you need faux sound control or other app to tweak sound levels.
CM12 build (01.04.2015), ODEXed, fix for move apps to sdcard - https://yadi.sk/d/93AA69qtffk7Q
CM12 build (12.03.2015), ODEXed - https://yadi.sk/d/dTadZHj_fCZKN
CM12 build (04/03/2015), ODEXed - https://yadi.sk/d/K20AhXQ4f2ha9
CM12 build (28/02/2015) - https://yadi.sk/d/GGDHoe76ewFe4
CM12 build (20/02/2015) - https://yadi.sk/d/mmi7ic1Eeo5Eh
news:
new cm12 updates, bugfixes and bugs
Mokee5 build (25/02/2015) - https://yadi.sk/d/yI-cBxQheskpk
How to install:
a)
1. flash boot.img from archive
2. boot to recovery and flash firmware archive
b) reboot to recovery and flash firmware archive
Old(not actual now):
Big thanks to thomas1991_12 and pabx. This Rom based on their work.
English screenshots - http://forum.xda-developers.com/showpost.php?p=56982062&postcount=77
More Russian screenshots - http://4pda.ru/forum/index.php?showtopic=475149&st=9040&view=findpost&p=35853307
Whats worked: see original theme - http://forum.xda-developers.com/xperia-z/orig-development/exp-lollipop-xperia-z-t2929369
Latest CM12 port(qsnc 09.02.2015 build based) - https://yadi.sk/d/QcxE0x0WedRUd
Updated boot.img w philz recovery and vibro for 09.02.2015 - https://yadi.sk/d/anPzmPL0eeiCg
CM12 for ZR, cm-12-20150112-INFECTED-yuga based:
CM12 for ZR: cm-12-20150112-INFECTED-yuga.zip port - https://yadi.sk/d/L_eIwqujdz6sb
30.12.2014 Update, pabx 5.0.8 build based:
boot - https://yadi.sk/d/BMTyrqVpdnfDQ
system - https://yadi.sk/d/uK10pxZSdnfDa
fix - https://yadi.sk/d/4CBtWW7wdnfDJ
20.12.2014 Update
system.img from 20.12.2014 - https://yadi.sk/d/LObcDGPOdXW4B
boot.img - https://yadi.sk/d/ynTfhBdHdXW3v
fix(Xperia ZR specified files (zr camera libs, sensors.conf etc, you need install it via twrp recovery before boot system)) - https://yadi.sk/d/GU_LI9S2dYwya
04.12.2014 Update:
system.img from 4.12.2014 - https://yadi.sk/d/yeqUq35rdAgGG
boot.img - https://yadi.sk/d/jXkoWjC4dAgFZ
fix(Xperia ZR specified files (zr camera libs, sensors.conf etc, you need install it via twrp recovery before boot system)) - https://yadi.sk/d/8fWVGGj5dAgHM
GAPPS - https://yadi.sk/d/wxoFZUWidAgJr
Worked SuperSu - http://download.chainfire.eu/636/SuperSU/UPDATE-SuperSU-v2.37.zip
***************************************************
Installing:
flash via fastboot or flashtool (in fastboot mode) boot and system images
Fastboot:
fastboot flash boot boot.img
fastboot flash system system.img
flash fix(recommended before first boot), supersu, gapps ...etc via recovery
if no internal sdcard found try this(in adb or terminal console):
su
restorecon -FR /data/media/0
***************************************************
Google Apps installation
After booting your phone for the first time, download the gapps package and push it to /sdcard using adb (or MTP):
adb push gapps_50_yuga_004-00cb.tgz /sdcard/
adb reboot
Your phone will now reboot and automatically install gapps during the boot process. (note that your phone will reboot twice - this is normal).
recommend to keep the gapps package in /sdcard/ after the installation finished: Upgrading to a new release will erase your existing gapps installation - but if the package is still present in /sdcard/, it will be automatically installed during the first boot.
*************************************************
Thank you for your effort Looking forward to testing this ROM upon upload. And i know it sounds silly, but an english version will be uploaded right???
I've been checking XDA like 10 times a day for the past two weeks hoping for this, and now it's finally here!!! You sir, deserve a medal.
I have a question, and I'm not sure if it's supposed to go here or the Q&A thread, since it's not specifically related to this ROM, per se. I just want to know how you built this; where did you get the device tree/binaries (not really sure what I'm talking about here, I've only read the building tutorials, don't really understand them fully)? AFAIK, Sony hasn't released them for the ZR, so how'd you do it? Is there some way to port them from other devices or something? Even a reference point to start searching would be great.
Thank you for your work!
P.S. Also, does this question belong in the Q&A thread or not?
Even i was wondering, but i thought perhaps it's only right to give the dev some time to upload the full details
kash296 said:
Even i was wondering, but i thought perhaps it's only right to give the dev some time to upload the full details
Click to expand...
Click to collapse
Of course, no pressure at all on the dev; I just wanted to say kudos, and thought I might as well ask. [emoji12]
xenius9 said:
Coming soon... Now kernel worked, ROM started, need little fixes.
Big thanks to thomas1991_12 and pabx. This Rom based on their work.
Bad news:
I have no time to develop, rom not work on all ZR-s - need additional kernel developing?(on many ZR models this rom work(on 2 phones work normal now), on other not (on my zr not work properly - mixed image on screen))
Now i have:
Kernel w twrp recovery - https://yadi.sk/d/WJw4gqmqcnLWd
SystemImage (from sony z, need add camera libs in vendor folder and some in etc/firmware and fix sensors.conf - from .283 stock firmware) - https://yadi.sk/d/S0Bh4H8gcmqRv
Xperia ZR specified files - https://yadi.sk/d/VZ8whMhccoCnt - zr camera libs, sensors.conf etc, you can install it via twrp recovery
Installing:
flash via fastboot or flashtool (in fastboot mode) boot and system images
test
Root - flash latest supersu via twrp recovery http://download.chainfire.eu/593/SuperSU/BETA-SuperSU-v2.19.zip
Click to expand...
Click to collapse
Um. So that means right now, it's a list of separate files??? Anyway awesome work.
P.S Sorry abt quoting the whole post, i hate that. But my comment wouldn't make any sense then
Awsome
Everything working fine. Just like stable daily driver rom. Can't say about battery right now.
The only thing missing is root because SuperSU 2.23 dosen't seem to work. I think some kernel modifications will be needed for proper execution of SU binary
BTW Thanks alot .
sshivampp said:
Everything working fine. Just like stable daily driver rom. Can't say about battery right now.
The only thing missing is root because SuperSU 2.23 dosen't seem to work. I think some kernel modifications will be needed for proper execution of SU binary
BTW Thanks alot .
Click to expand...
Click to collapse
RIL works ????? ( Are you able to make calls and receive calls and send messages etc ?)
If you are using this as daily driver then try testing bluetooth, wifi, RIL, mobile internet (2g+3g), camera etc......
I would definitely do all this on weekend....
@Xenius :- HATS OFF MAN.......... Even if it just boots, I would say that it's sheer genius..........
nikhilkaushik said:
RIL works ????? ( Are you able to make calls and receive calls and send messages etc ?)
If you are using this as daily driver then try testing bluetooth, wifi, RIL, mobile internet (2g+3g), camera etc......
I would definitely do all this on weekend....
@Xenius :- HATS OFF MAN.......... Even if it just boots, I would say that it's sheer genius..........
Click to expand...
Click to collapse
I have exaaams You guys are tempting me And what do we do abt Gapps?? Jus download one of the lollipop gapps???
nikhilkaushik said:
RIL works ????? ( Are you able to make calls and receive calls and send messages etc ?)
If you are using this as daily driver then try testing bluetooth, wifi, RIL, mobile internet (2g+3g), camera etc......
I would definitely do all this on weekend....
@Xenius :- HATS OFF MAN.......... Even if it just boots, I would say that it's sheer genius..........
Click to expand...
Click to collapse
Bluetooth is fine except I cannot accept or share file with apk extension
WiFi also seems to be fine till now and yes I can make calls, messages, and can connect to data network.
Camera quality is accepteble (photo preview is kind of buggy )
Till now what I cannot test its GPS as I don't use it. but can provide logcat if anyone wants
Edit: At latest lollipop release for xperia Z (18 November), RIL is broken, atleast in ZR with this kernel, don't know about Z
maybe kernel update will fix this
---------- Post added at 10:49 PM ---------- Previous post was at 10:40 PM ----------
kash296 said:
I have exaaams You guys are tempting me And what do we do abt Gapps?? Jus download one of the lollipop gapps???
Click to expand...
Click to collapse
I suggest exam first
BTW you can download gapps from here
or direct link of one I downloaded here (I don't remember the source page but it was from XDA)
Thanks for the gapps link. Holidays inbetween so it aint a prob for the exams. Downloading the image right now, will try out the bluetooth and see if i too get the same issue
Xenius you are genius. Booted and running smoothly without any FCs.
Sent from my Lollipop for ZR using XDA Free mobile app
.
Man
big tnxfor your awsome work:cyclops:
And can you upload your kernel source? May be developers like @Alx31TLse can build more lollipop roms:fingers-crossed:
Yes i can, now i build new kernel w new ramdisk(w working root).
18.11.2014 firmware working... new kernel too... root working
Files...soon.
All updates added. See 1st post.
xenius9 said:
All updates added. See 1st post.
Click to expand...
Click to collapse
I am having trouble downloading from playstore after flashing gapps.. As there isn't a file manager preinstalled, I'm trying to download one, so that i can get back my old apps which are backed up in the SD card. Anyone else has the same issue abt the play store?
P.S I found out the problem. My Gmail wasn't synced so my account wasn't fully functional. Never mind
kash296 said:
I am having trouble downloading from playstore after flashing gapps.. As there isn't a file manager preinstalled, I'm trying to download one, so that i can get back my old apps which are backed up in the SD card. Anyone else has the same issue abt the play store?
Click to expand...
Click to collapse
I Use adb for apps installation and total commander+adb plugin for any dev deals
you can made small installation zip for recovery w needed apps
xenius9 said:
I Use adb for apps installation and total commander+adb plugin for any dev deals
you can made small installation zip for recovery w needed apps
Click to expand...
Click to collapse
Not so familiar with the adb codes, i've never felt the need to use them. Is the kernel fully permissive? I'd like to know if i can run Viper4android on it.
kash296 said:
Not so familiar with the adb codes, i've never felt the need to use them. Is the kernel fully permissive? I'd like to know if i can run Viper4android on it.
Click to expand...
Click to collapse
Install it and test)))
xenius9 said:
Install it and test)))
Click to expand...
Click to collapse
I'm definitely going to. But why i asked is, cause they were mentioning about permissive kernels. So i thought i'd ask you about that.
And i forgot to ask. The exclamatory symbol on the signal icon ? Why is it coming?? Is it indicating any issue???
Team ARM Core Presents CMX11 NitroX Edition
CMX11 NitroX Edition is based on CMX11 Rom!This rom is powered with performance engines,Battery Tweaks,Audio Engines and many more tweaks and bug fixes.CMX11 NitroX Edition is the fastest cm11 say good bye to lags!
A Big Thanks to @omerdeniz99 for making CMX11! Thank you so much bro!
Thanks to @raisul2010.5396 for his modded TWRP and Samurai OC Kernel!
also Thanks to @mohammad.afaneh for makingTWRP for our device!
and Thanks to me for making NitroX Edition!
Based on 'ROM-PacMe' CM11.His Github
https://github.com/ROM-PacMe
Bugs:
No bugs Everything is working
NitroX V3 is more faster,stable and fully bugless
Features of NitroX V3:
1.Camera Fully Working
2.Video Recording Fully Working
3.Media Scanner Fully Working
4.Google Apps Fully Working
5.Download Manager Fully Working
6.Emojis are fully working(Use the keyboard)
7.Video playing fully working and smooth upto 340p(Use Software Decoder in MX Player)
8.Super Smooth and Fast
9.System 30MB Free
10.All languages are supported
NitroX V3 Download Link: http://www32.zippyshare.com/v/5Eg0N4xd/file.html
GApps Download Link: https://forum.xda-developers.com/devdb/project/dl/?id=20183(GApps can cause heavy lags :/)
Video Recording Instructions:
Steps:
Firstly fix the recording app bug by following below steps:
1.Copy video recorder.apk from system/priv-app to sd card
2.Delete the apk from priv app
3.reboot your phone
4.install the app as user app from sd card
Now follow these steps:
1.Open the video recording app
2.Go to settings and change audio quality to the lowest level 11khz
3.App will give force close dont worry!Start the app again!Record video
4.View your video through the video recording app
NitroX V2
Changelog Of NitroX V2
1.Download manager working
2.Gapps fully working
3.New CMX Bootanimation
4.Inbuilt Ad-Blocker
5.All useless system apps removed
6.System 35MB Free
7.All indian languages supported
8.Fully Optimized and Boosted
9.Super responsive and liquid smooth UI
10.Performance and Battery tweaks added
NitroX V2 Download Link: NOT AVAILABLE
NitroX V1:
Features:
1.Ultimate Performance Engine Installed(Thread:- http://http://forum.xda-developers.com/android/software-hacking/mod-ultimate-performence-blazing-fast-t3482317)
2.Fully Zipaligned
3.Fully Sqlite optimized
4.Full MDPI framework for better stability
5.Support for Indian Languages(Hindi and Marathi)
6.All useless apps removed(System 20MB Free)
7. 2 New audio engines installed(Pure Audio 2.0 and Extreme Beats Aural Maximizer)
8.New Viper4Android(Thread:- http://forum.xda-developers.com/showthread.php?t=2191223)
9.Fast CM11 Trebuchet launcher added
10.Stable Camera(Can't conncect to camera issue fixed)
11.CM11 S new colored lockscreen
12.Samurai OC Kernel Added(Thread:- http://forum.xda-developers.com/galaxy-ace/s5830i-develop/dev-samurai-kernel-samsung-galaxy-ace-t3490339)
13.Latest TWRP 3.0.2.1-b1 Added(Thread:- http://forum.xda-developers.com/galaxy-ace/s5830i-develop/recovery-twrp-2-8-7-0-touch-recovery-t3463050)
14.Viper4Android audio build.prop tweaks added
15.Kernel Adiutor Mod added
16.New sound recorder added
Download Link:
https://drive.google.com/open?id=0B7ixwTfUzsa6X2hJTHVhZ2hiVUk
Sim Unlock Troubleshoot
Steps:
1.Flash stock rom via odin
2.Root the stock rom
3.Install Galaxy Toolbox app
4.Unlock your galaxy using the app
INSTALLATION:
FIRST FLASH THIS MODEM (for fix sim bug) AND TEMPORARY RECOVERY VIA ODIN (clockworkmod 6.0.1.2)
DOWNLOAD MODEM
https://www.androidfilehost.com/?fid=24566454284190169
DOWNLOAD RECOVERY
http://forum.xda-developers.com/devdb/project/dl/?id=18641
After falshing of recovery and modem are done flash this CWM 6.0.5.3 by rebooting to recovery using 3-button combo
DOWNLOAD CWM 6.0.5.3
http://forum.xda-developers.com/devdb/projvect/dl/?id=18698
After flashing of CWM done then go to Advanced and select Reboot Recovery.It will reboot you to the new CWM recovery.Now go to Mounts and Storage then Format system,data,cache,sd-ext.Next Install the ROM from sdcard using ClockworkMod Recovery
After installation done Flash Fly On Mod for performance and battery boost.Download Here:
https://forum.xda-developers.com/showthread.php?t=2226373
Petformance Tips:
1.Enable Developer Options by tapping the build number.Disable all window animations in Developer.
2.Enable KSM from memory management option in performance tab at settings
Give me a Thanks if you like my work
If you get installation errors then follow below steps!
1.Flash boot and modem via odin
2.go to recovery mode and flash cwm 6.0.5.3 then go to advanced reboot to recovery
3.Format system,data,cache
4.Mount system,data,cache
5.Install the rom
6.Reboot
My personal Performance Boosting Suggestions:
1.Disable all animations
2.Enable KSM via kernel adiutor
3.Enable very aggressive low memory killer via kernel adiutor
4.Use the prevent running xposed module to prevent auto start of apps
:good: keep going man , hail team arm core
raisul2010.5396 said:
:good: keep going man , hail team arm core
Click to expand...
Click to collapse
hail team arm core
good work bro
Screenshot?,play store work?,good bro
Sent from my GT-S5830i using XDA Free mobile app
boby123 said:
Screenshot?,play store work?,good bro
Sent from my GT-S5830i using XDA Free mobile app
Click to expand...
Click to collapse
screenshot is same.as cmx11 so i dont attached and download manager bug dont fixed it so playstore wont work
omerdeniz99 said:
good work bro
Click to expand...
Click to collapse
hail team arm core
Great work, thank you! Reading the changelog, I see that almost all the issues connected with the CMX11 Snapshot 9 I've underlined are solved apart from the one with the download manager and, maybe, the very slow reaction of the screen when an alarm is ringing or a call is incoming. Maybe I'm mistaken and it is solved too? That would be great!
Unfortunately by now I haven't a cooperve at hand to test the rom myself (the one I work with is my fiancee's and it is quite hard to get hold of it) but I plan to do it ASAP. I don't know if I would be able or not but don't hesitate to tell me if there is something I could do (or at least try to do) to help you with the issue with the download manager. Have a good day and thank you again for your great work!
-=Guybrush=- said:
Great work, thank you! Reading the changelog, I see that almost all the issues connected with the CMX11 Snapshot 9 I've underlined are solved apart from the one with the download manager and, maybe, the very slow reaction of the screen when an alarm is ringing or a call is incoming. Maybe I'm mistaken and it is solved too? That would be great!
Unfortunately by now I haven't a cooperve at hand to test the rom myself (the one I work with is my fiancee's and it is quite hard to get hold of it) but I plan to do it ASAP. I don't know if I would be able or not but don't hesitate to tell me if there is something I could do (or at least try to do) to help you with the issue with the download manager. Have a good day and thank you again for your great work!
Click to expand...
Click to collapse
i have added samurai oc kernel it is designed to reduce the screen on delay.Im telling you some tweaks that will help you to get rid of screen delay 1st disable all animations 2nd force stop all user apps using prevent running xposed module
honestly we dont have a 100% working solution for the screen on delay we are working on it maybe in next update it will be fixed
and the downlod manager is not working till now i tried everything like extracting from other cm11 builds and also from other device's cm11,i tried setting correct permissions and pushing apks to app/priv-app nothing worked we are working on it to fix this
sohamsen said:
the downlod manager is not working till now i tried everything like extracting from other cm11 builds and also from other device's cm11,i tried setting correct permissions and pushing apks to app/priv-app nothing worked we are working on it to fix this
Click to expand...
Click to collapse
What you describe here has been more or less the path followed by me when I've tried to solve the issue with the snapshot 9, to no avail unfortunately. The issue with the download manager has been introduced in the snapshot 9: if I remember well (but I'm almost certain about that), everything was fine on that side with the snapshot 8 and this could help with tracking down the source of the issue (I know that with words everything seems simple while it actually isn't! ) though omerdeniz99 certainly know that better than anyone else being him the mantainer of that project.
For what concerns the screen wakeup delay, I'm sure things would be better with your last modifications and I would follow your advices as soon as I would be able to test your rom. Thanks!
Bugs :
WIFI doesnt work
compass doesnt work
hostspot doesnt work
I used this rom
"ACERom Build 2"
wifi works but hotspot and compass doesnt work on above ROM , And that ROM is very slow
also it can't unlock , locked SIM
video Recording is not work !
let me say honestly , It is unstable ROM
-=Guybrush=- said:
What you describe here has been more or less the path followed by me when I've tried to solve the issue with the snapshot 9, to no avail unfortunately. The issue with the download manager has been introduced in the snapshot 9: if I remember well (but I'm almost certain about that), everything was fine on that side with the snapshot 8 and this could help with tracking down the source of the issue (I know that with words everything seems simple while it actually isn't! ) though omerdeniz99 certainly know that better than anyone else being him the mantainer of that project.
For what concerns the screen wakeup delay, I'm sure things would be better with your last modifications and I would follow your advices as soon as I would be able to test your rom. Thanks!
Click to expand...
Click to collapse
ok i will try next build with the v8 base
h1229m said:
Bugs :
WIFI doesnt work
compass doesnt work
hostspot doesnt work
I used this rom
"ACERom Build 2"
wifi works but hotspot and compass doesnt work on above ROM , And that ROM is very slow
also it can't unlock , locked SIM
video Recording is not work !
let me say honestly , It is unstable ROM
Click to expand...
Click to collapse
flash stock rom via odin then use galaxy toolbox and unlock ur sim then follow the steps and install cmx nitox then install samurai oc kernel
sohamsen said:
flash stock rom via odin then use galaxy toolbox and unlock ur sim then follow the steps and install cmx nitox then install samurai oc kernel
Click to expand...
Click to collapse
I Did ! I install ROM and samurai oc kernel
Hostspot is working , But Wifi not working !!!
Video Recording Not working Also
sohamsen said:
ok i will try next build with the v8 base
Click to expand...
Click to collapse
It could be a valid idea but please be adviced that now I don't remember what (too much time has passed since I've tested it) but the v8 had some other issues (quite annoying I remember: if I remember well, one was the camera which was even worse than the one included in v9 but this isn't a problem since you've completely replaced it) which forced me to update to the v9 as soon as it was released.
h1229m said:
Video Recording Not working Also
Click to expand...
Click to collapse
Missing video recording capability is a known issue since the first versions of CMX11 indeed this is underlined in the features list for it and a workaround is suggested. I may be wrong but I think it could be due to something from Broadcom being still closed source.
I was wondering about one thing. One of the main changes between cmx11 v9 and v8 was the replacement of the previous browser with UC Browser. It uses a built-in download manager and this could be the cause for the issue with the download manager (probably, something more than the browser alone was removed and/or modified to take advantage of that) but I remember that I had tried to replace it with the previous solution, restore all the dependencies and permissions but this didn't fix the download manager... Maybe I had missed something or failed with one of my modifications, it is certainly possible.
Again, omerdeniz99 is the one who knows for sure what's going on, let's hope his exams will go the best way possible and when he would have spare time for his projects again I'm sure we would receive news from him.
h1229m said:
I Did ! I install ROM and samurai oc kernel
Hostspot is working , But Wifi not working !!!
Video Recording Not working Also
Click to expand...
Click to collapse
WiFi should work
ok then go to aroma installer of samurai kernel then choose stock instead of samurai
-=Guybrush=- said:
It could be a valid idea but please be adviced that now I don't remember what (too much time has passed since I've tested it) but the v8 had some other issues (quite annoying I remember: if I remember well, one was the camera which was even worse than the one included in v9 but this isn't a problem since you've completely replaced it) which forced me to update to the v9 as soon as it was released.
Missing video recording capability is a known issue since the first versions of CMX11 indeed this is underlined in the features list for it and a workaround is suggested. I may be wrong but I think it could be due to something from Broadcom being still closed source.
Click to expand...
Click to collapse
i will also update the cmx nitrox after my exams
NOW THAT CAMCORDER ERRORS WERE FIXED IN OREO AND PIE ROMS THIS APP IS USELESS
Hi, today I got the newest Moto Camera app to work on my Osprey. I'm currently using AEX v5.4 and the camera works (also camcorder at 720p 30FPS). I made a flasheable ZIP that install the app as a system app. I you want you can extract the apk and install as a user app. If you try it tell me on which Moto G3 variant you are (including Turbo Edition), the ROM you are using and which features of the camera are working (if it works at all) so that I can add it to the compatibility list. Thanks!
HOW TO INSTALL
First method: Just flash the ZIP via TWRP (Latest TWRP version recommended).
Second method: Extract the apk from the ZIP file and install as a user app.
Download: https://drive.google.com/open?id=1UVGG1ua94LBihRd08kBQQq-A8huyuM7Y
COMPATIBILITY
Device:
Moto G3 (osprey)
Not needed in Pie, camcorder fixed.
[*]ROM: LOS 16.0 SP Vendor (Pie): Most features working (panorama not working, up to 720p video recording).
[*]ROM: Pixys OS (Pie): Most features working (panorama not working, up to 720p video recording).
Not needed in Oreo, camcorder fixed.
[*]ROM: AEX v5.4 (Oreo): Most features working (panorama not working, up to 720p video recording).
[*]ROM: LineageOS 15.1 (Oreo): Most features working (panorama not working, up to 720p video recording)
[*]ROM: AOSP 8.1 (Oreo): Most features working (panorama not working, up to 720p video recording)
[*]ROM: AEX v4.6 (Nougat): Not working.
[*]ROM: MainStageOS (Nougat): Not working.
Screenshots below...
Hope you like it!
thanks man , ok are you sure it doesn't work with magisk
Rajhrishabh892 said:
thanks man , ok are you sure it doesn't work with magisk
Click to expand...
Click to collapse
Try it with Magisk installed and see if it works, maybe it does work for you.
Does this work on other roms like lollipop to nougat
Manish sorout said:
Does this work on other roms like lollipop to nougat
Click to expand...
Click to collapse
As the app is from a G5s Plus it should only be compatible with Nougat and newer versions. You can try it and tell me if it works. I will try to test it on other ROMs and port it to Marshmallow and Lollipop
AhReLocazo said:
As the app is from a G5s Plus it should only be compatible with Nougat and newer versions. You can try it and tell me if it works. I will try to test it on other ROMs and port it to Make and Lollipop
Click to expand...
Click to collapse
yeah man it works well with magisk and its stabilisation features is just amazing and video recording is working perfectly
cons :-
1. panorama mode is not working, everytime i on panaroma , the app crash
2. no hdr mode
3. no professional mode
4. no slo-mo recording features ( but who use slo-mo actually)
using it on aex 5.4 rom (android 8.1 )
Rajhrishabh892 said:
yeah man it works well with magisk and its stabilisation features is just amazing and video recording is working perfectly
cons :-
1. panorama mode is not working, everytime i on panaroma , the app crash
2. no hdr mode
3. no professional mode
4. no slo-mo recording features ( but who use slo-mo actually)
Click to expand...
Click to collapse
Professional mode isn't possible because as far as I know the Moto G3 doesn't support the new Motorola camera drivers or something like that. And regarding panorama and HDR I must say that I don't really know how to fix that, so if you want this features you should use the stock Motorola Camera app.
Can you tell me on which device and ROM are you using it so I can add it to the list? Thanks
AhReLocazo said:
Hi, today I got the newest Moto Camera app to work on my Osprey. I'm currently using AEX v5.4 and the camera works (also camcorder at 720p 30FPS). I made a flasheable ZIP that install the app as a system app. I you want you can extract the apk and install as a user app. If you try it tell me on which Moto G3 variant you are (including Turbo Edition), the ROM you are using and which features of the camera are working (if it works at all) so that I can add it to the compatibility list. Thanks!
HOW TO INSTALL
First method: Just flash the ZIP via TWRP (Latest TWRP version recommended).
Second method: Extract the apk from the ZIP file and install as a user app.
Download: https://drive.google.com/open?id=1UVGG1ua94LBihRd08kBQQq-A8huyuM7Y
COMPATIBILITY
Device:
Moto G3 (osprey)
ROM: AEX v5.4 (Oreo): Most features working (panorama not working, up to 720p video recording)
SCREENSHOTS
Hope you like it!
Click to expand...
Click to collapse
Is this app modded by you?
As i thought this shouldn't worked with osprey due to Camera2 Api requirement, but still i have checked because you have mentioned it's working for you on Osprey running Aex 5.4.. FYI I'm on same Os & device is XT1550 Osprey
Test one Twrp Flash - after flashing zip rebooted to device & there's no Motocamera app there..
Test Two Manual install Apk from Zip - Successfully installed apk & when i tried to opened it given a error device is not supported..
I suspect you're spreading some false information here..
Moderators please look into this..
Edit :- It got working for me as after i have unrooted my device.. I will try to get that Root issue fixed if possible.. anyways thanks for this app.. it's lack many of the regular app features but still one more Camcorder working camera for Osprey Oreo users..
rahul9999 said:
As i thought this shouldn't worked with osprey due to Camera2 Api requirement, but still i have checked because you have mentioned it's working for you on Osprey running Aex 5.4.. FYI I'm on same Os & device is XT1550 Osprey
Test one Twrp Flash - after flashing zip rebooted to device & there's no Motocamera app there..
Test Two Manual install Apk from Zip - Successfully installed apk & when i tried to opened it given a error device is not supported..
I suspect you're spreading some false information here..
Moderators please look into this..
Click to expand...
Click to collapse
1. This is the stock app, it's not modified by me in any way. I tried decompiling it to make osprey compatible with other features of the camera and I couldn't compile a working APK.
2. This is not false information, the same happened to me when I had Magisk installed, when I uninstalled Magisk the camera app worked. As you can see this worked for other people also. In order to install the ZIP you have to make sure the system partition is mounted.
Regarding the zip not installing, I'm going to fix the mounting issues so it installs correctly.
And yes, when I was testing it I got the "Device not supported" error and the camera closed when I had Magisk installed, after uninstalling Magisk the camera gave me the same toast notification but it started correctly.
rahul9999 said:
As i thought this shouldn't worked with osprey due to Camera2 Api requirement, but still i have checked because you have mentioned it's working for you on Osprey running Aex 5.4.. FYI I'm on same Os & device is XT1550 Osprey
Test one Twrp Flash - after flashing zip rebooted to device & there's no Motocamera app there..
Test Two Manual install Apk from Zip - Successfully installed apk & when i tried to opened it given a error device is not supported..
I suspect you're spreading some false information here..
Moderators please look into this..
Click to expand...
Click to collapse
I updated the ZIP file, now it should work fine and as I said before, if it doesn't work try uninstalling Magisk.
rahul9999 said:
As i thought this shouldn't worked with osprey due to Camera2 Api requirement, but still i have checked because you have mentioned it's working for you on Osprey running Aex 5.4.. FYI I'm on same Os & device is XT1550 Osprey
Test one Twrp Flash - after flashing zip rebooted to device & there's no Motocamera app there..
Test Two Manual install Apk from Zip - Successfully installed apk & when i tried to opened it given a error device is not supported..
I suspect you're spreading some false information here..
Moderators please look into this..
Click to expand...
Click to collapse
deleted
---------- Post added at 07:28 AM ---------- Previous post was at 07:27 AM ----------
[/COLOR]deleted
Manish Raja 345 said:
deleted
---------- Post added at 07:28 AM ---------- Previous post was at 07:27 AM ----------
[/COLOR]deleted
Click to expand...
Click to collapse
What was that for?
rahul9999 said:
As i thought this shouldn't worked with osprey due to Camera2 Api requirement, but still i have checked because you have mentioned it's working for you on Osprey running Aex 5.4.. FYI I'm on same Os & device is XT1550 Osprey
Test one Twrp Flash - after flashing zip rebooted to device & there's no Motocamera app there..
Test Two Manual install Apk from Zip - Successfully installed apk & when i tried to opened it given a error device is not supported..
I suspect you're spreading some false information here..
Moderators please look into this..
Edit :- It got working for me as after i have unrooted my device.. I will try to get that Root issue fixed if possible.. anyways thanks for this app.. it's lack many of the regular app features but still one more Camcorder working camera for Osprey Oreo users..
Click to expand...
Click to collapse
Post edited
rahul9999 said:
Post edited
Click to expand...
Click to collapse
Thanks for looking into that issue! I tried to fix that but I couldn't compile a working APK, every APK I compiled didn't install. For some reason the app worked with Magisk for some user. And the fact that it works without Camera2 API is because as far as I know Camera2 API is the stock android API it's kind of retro compatible with older camera APIs. If you need any help tell me, I'll try to do my best!
Working with magisk on aex v5.4 ...Panorama working but video recording is not...
harry9713 said:
Working with magisk on aex v5.4 ...Panorama working but video recording is not...
Click to expand...
Click to collapse
Wow this is weird, we are all using the same ROM and we get different results... Which version on Magisk do you have? And have you previously installed any other camera mods or something?
AhReLocazo said:
Wow this is weird, we are all using the same ROM and we get different results... Which version on Magisk do you have? And have you previously installed any other camera mods or something?
Click to expand...
Click to collapse
Just clean flashed v5.4 today. Along with magisk v16.0 . Then just extracted the APK from your zip because I was too lazy to reboot and flash. Got it worked and using... Don't know whether am missing something.
harry9713 said:
Just clean flashed v5.4 today. Along with magisk v16.0 . Then just extracted the APK from your zip because I was too lazy to reboot and flash. Got it worked and using... Don't know whether am missing something.
Click to expand...
Click to collapse
I did exactly the same right now and I couldn't get it to work. Which Moto G3 variant do you have? I think I may have found the issue