I have selinux set on permissive and I have busybox installed is it that we can't have it on 6.0.1? Please help
josianjehu said:
I have selinux set on permissive and I have busybox installed is it that we can't have it on 6.0.1? Please help
Click to expand...
Click to collapse
works fine here. where did you install it? its supposed to be in /system/priv-app/. theres a flashable in the viper thread in the themes and apps section.
simms22 said:
works fine here. where did you install it? its supposed to be in /system/priv-app/. theres a flashable in the viper thread in the themes and apps section.
Click to expand...
Click to collapse
Idk what you mean by that sorry I installed the apk and I installed the drivers can you give me a link to the threat you used to install it?
josianjehu said:
Idk what you mean by that sorry I installed the apk and I installed the drivers can you give me a link to the threat you used to install it?
Click to expand...
Click to collapse
that's why it won't work, you can't install it as a normal app, it needs to be a system app. anyways, here you go. needs to be flashed in twrp recovery http://forum.xda-developers.com/nexus-6/themes-apps/viper4android-t2952137
simms22 said:
that's why it won't work, you can't install it as a normal app, it needs to be a system app. anyways, here you go. needs to be flashed in twrp recovery http://forum.xda-developers.com/nexus-6/themes-apps/viper4android-t2952137
Click to expand...
Click to collapse
I flashed the stock viper 5.0 zip and nothing appeared afterwards
josianjehu said:
I flashed the stock viper 5.0 zip and nothing appeared afterwards
Click to expand...
Click to collapse
nothing? no app or anything? try flashing again.
simms22 said:
nothing? no app or anything? try flashing again.
Click to expand...
Click to collapse
I tried flashing a different one and still nothing could be twrp? I installed twrp using the nexus root toolkit
josianjehu said:
I tried flashing a different one and still nothing could be twrp? I installed twrp using the nexus root toolkit
Click to expand...
Click to collapse
you can use any root file explorer to stick the apk into /system/priv-app/, then reboot and it'll install itself.
simms22 said:
you can use any root file explorer to stick the apk into /system/priv-app/, then reboot and it'll install itself.
Click to expand...
Click to collapse
Okay this what I'm going to do
1. Extract apk from the stock viper 5.0 to system/priv-apps
2. Go to recovery flash the zip
3. And boom it should appear
Correct me if I'm wrong
josianjehu said:
Okay this what I'm going to do
1. Extract apk from the stock viper 5.0 to system/priv-apps
2. Go to recovery flash the zip
3. And boom it should appear
Correct me if I'm wrong
Click to expand...
Click to collapse
just sticknit into /system/priv-app/ and save it. then just reboot and it will install itself.no flash needed this way.
simms22 said:
just sticknit into /system/priv-app/ and save it. then just reboot and it will install itself.no flash needed this way.
Click to expand...
Click to collapse
Doesn't let me put files in that folder and I did put it in read and write
josianjehu said:
Doesn't let me put files in that folder and I did put it in read and write
Click to expand...
Click to collapse
sounds like you don't have root, or just have partial root.
simms22 said:
sounds like you don't have root, or just have partial root.
Click to expand...
Click to collapse
That's strange cause I am able to use light flow for my notification light which uses root
josianjehu said:
That's strange cause I am able to use light flow for my notification light which uses root
Click to expand...
Click to collapse
then you have partial root. its a normal issue, that happens often enough. to be 100% sure, you can try editing tour build.prop file. if the edits stay after a reboot then you have full root. if they don't stay after a reboot, then you have partial root. which is why viper isn't working. it can also be that your system is full. you can delete whichever apps you don't use from /system/app/, which will give you space. you did say you flashed it but it never appeared. if its full, it can't appear.
simms22 said:
then you have partial root. its a normal issue, that happens often enough. to be 100% sure, you can try editing tour build.prop file. if the edits stay after a reboot then you have full root. if they don't stay after a reboot, then you have partial root. which is why viper isn't working. it can also be that your system is full. you can delete whichever apps you don't use from /system/app/, which will give you space. you did say you flashed it but it never appeared. if its full, it can't appear.
Click to expand...
Click to collapse
When I tried editing the build.prop it said I didn't have enough space even tho I have 20 gb left of storage
josianjehu said:
When I tried editing the build.prop it said I didn't have enough space even tho I have 20 gb left of storage
Click to expand...
Click to collapse
Does installing cm help with all this?
josianjehu said:
When I tried editing the build.prop it said I didn't have enough space even tho I have 20 gb left of storage
Click to expand...
Click to collapse
i know, google did it on purpose. to fix that delete whichever system apps you dont use. and storage has nothing to do with system space. system space iz held in a seperate partition.
---------- Post added at 05:21 PM ---------- Previous post was at 05:19 PM ----------
josianjehu said:
Does installing cm help with all this?
Click to expand...
Click to collapse
no idea. probably not?
simms22 said:
i know, google did it on purpose. to fix that delete whichever system apps you dont use. and storage has nothing to do with system space. system space iz held in a seperate partition.
---------- Post added at 05:21 PM ---------- Previous post was at 05:19 PM ----------
no idea. probably not?
Click to expand...
Click to collapse
Thaaaaaank you soon much knowing about the partitions Google made I did it by uninstalling apps
dont instal on note 5
Related
Here is PIMPED Stock SM-T210R T210RUEU0CNI1 (Canada)
Features
- Highly Debloated
- Rooted
- Busybox
- Zipalign
- etc
-And an easter egg
Download link: http://www.mediafire.com/download/eg3swl50ymflxc0/PIMPED_STOCK_T210R
NOTES: For SM-T210 user flash Werewolf kernel to get it to work
Also it might take a while to install because of the compression
Delete phservice (/system/bin) to set CPU governors and I/O
And there isn't a bootanimation for quicker boot time
Bugs: You tell me
One more
What Version 4.1.2 or 4.4.2..?
Teknodad1974 said:
What Version 4.1.2 or 4.4.2..?
Click to expand...
Click to collapse
T210RUEU0CNI1 = Android 4.4.2
Link not working
svicenty said:
Link not working
Click to expand...
Click to collapse
Try again?
EDIT: Click on the link don't copy it
I think thiers something wrong with miediafire it doesn't give you Nothing to copy
svicenty said:
I think thiers something wrong with miediafire it doesn't give you Nothing to copy
Click to expand...
Click to collapse
Works for me
HerroYou said:
Here is PIMPED Stock SM-T210R T210RUEU0CNI1 (Canada)
Features
- Highly Debloated
- Rooted
- Busybox
- Zipalign
- etc
-And an easter egg
Download link: http://www.mediafire.com/download/eg3swl50ymflxc0/PIMPED_STOCK_T210R
NOTES: For SM-T210 user flash Werewolf kernel to get it to work
Also it might take a while to install because of the compression
Delete phservice (/system/bin) to set CPU governors and I/O
And there isn't a bootanimation for quicker boot time
Click to expand...
Click to collapse
I tried this and many others on my T210R with TWRP 2.7.1.0. Nothing has stuck. It's like I don't have an OS on it at all. If I reboot, it just boots into recovery, nothing else. Where did I go wrong?
gonehaywire said:
I tried this and many others on my T210R with TWRP 2.7.1.0. Nothing has stuck. It's like I don't have an OS on it at all. If I reboot, it just boots into recovery, nothing else. Where did I go wrong?
Click to expand...
Click to collapse
You are not using the latest version of your custom recovery. Update it right meow!
Screenshots?
shayind4 said:
Screenshots?
Click to expand...
Click to collapse
It is stock rom so there won't be a big difference, only a ton of apps removed
Any one else having issues saving to the external sd card? every time i try to do a TB it says I have insufficient storage space. I have like 10gb left on my card, It wont even save one thing.
bnb25 said:
Any one else having issues saving to the external sd card? every time i try to do a TB it says I have insufficient storage space. I have like 10gb left on my card, It wont even save one thing.
Click to expand...
Click to collapse
Did you tell the recovery to do a backup to your sdcard1?
HerroYou said:
Did you tell the recovery to do a backup to your sdcard1?
Click to expand...
Click to collapse
@HerroYou,
Have you changed the permisson for apps to write on the Sdcard, KK dont allow apps to write on sdcard.
bierma32 said:
@HerroYou,
Have you changed the permisson for apps to write on the Sdcard, KK dont allow apps to write on sdcard.
Click to expand...
Click to collapse
how do i do that? I use KK on other devices and haven't had this issue.
---------- Post added at 04:52 PM ---------- Previous post was at 04:51 PM ----------
HerroYou said:
Did you tell the recovery to do a backup to your sdcard1?
Click to expand...
Click to collapse
Recovery does a nanoid just fine. I can't get titanium backup to back up apps.
bnb25 said:
how do i do that? I use KK on other devices and haven't had this issue.
---------- Post added at 04:52 PM ---------- Previous post was at 04:51 PM ----------
Recovery does a nanoid just fine. I can't get titanium backup to back up apps.
Click to expand...
Click to collapse
Take a look to this thread. http://forum.xda-developers.com/showthread.php?t=2617921
Post # 10
bierma32 said:
Take a look to this thread. http://forum.xda-developers.com/showthread.php?t=2617921
Post # 10
Click to expand...
Click to collapse
Fomat your sdcard using the recovery, works for me.
Does anyone have a link for the factory boot animation? I actually like it lol.
Hi!
I have rooted my phone, and deleted bloatware using uninstall.
After reboot, the apps returned, so I deleted /system/apps/*.apk (relevant) files (I'd also like to know what are the *.odex files if someone can kindly tell me )
Then, I rebooted again, and again they were... I have read in previous threads that flashing the kernel is needed. Is that so? And if so, how can it be done?
Thanks!
barashe said:
Hi!
I have rooted my phone, and deleted bloatware using uninstall.
After reboot, the apps returned, so I deleted /system/apps/*.apk (relevant) files (Id also like to know what are the *.odex files if someone can kindly tell me )
Then, I rebooted again, and again they were... I have read in previous threads that flashing the kernel is needed. Is that so? And if so, how can it be done?
Thanks!
Click to expand...
Click to collapse
You need a custom kernel with /system write permission (unsecured kernel) .
You will not be able to install ota updates if you mess with /system files.
Thanks!
alray said:
You need a custom kernel with /system write permission (unsecured kernel) .
You will not be able to install ota updates if you mess with /system files.
Click to expand...
Click to collapse
Downloaded and installed ElementalX-m7 kernel and now they are all gone!
barashe said:
Downloaded and installed ElementalX-m7 kernel and now they are all gone!
Click to expand...
Click to collapse
for future reference, you can also stay on stock kernel (dont really know why ) and do the changes in custom recovery (eg TWRP)
if you want a relatively easy file manager for custom recovery, check out Aroma File Manager... that would save you the hassle of using an adb shell
oh, and if all is good now, can you also edit main thread title to include [SOLVED], thanks
edit the first post -> at the bottom of the edit window, click Go Advanced, and then you can edit main title
Hey Guys I have finally fixed the fingerprint bug found in all the official S7 marshmallow,To use the fingerprint you must install C locker free version from the playstore...The rom takes about 10-15 minutes to optimize,do a clean flash...if your phone does not boot even after that,remove the battery and restart your device,when the bootanimation appears press and hold down the volume - button to try putting it into safe mode and you device will boot up just fine....
https://mega.nz/#!X81khIyQ!puPOTaW0eaiH9l0nxnk87dAtjF_awFKoxY1BAYfiROs
Edit:-
Hi everyone,So I have uploaded the files on Mega to manually fix the Fingerprint
https://mega.nz/#!rtMT3C7a!hJVcWlgNJjTIlTinOjgHcdjvhOyhTcq9seERa8Wo3z4
The Video Tutorial is on https://www.youtube.com/watch?v=UMWe5T5DSgU
The Files Rar file contains two sub folders,
App and Priv-app
Place the folders in the folder App in System/App of your phone
Place the folders in the folder Priv-app in System/Priv-app
Also Set the Permission Octals for the Folders to 0755
and the octal to Apk or other files inside the Folders to 0644
These are the files I have replaced inside the Rom,If anyone is willing to make a flashable zip for these files,your welcome,But I don't think it will work if you are using your rom right now,It will cause the settings app to crash upon opening it....So A flashable zip and a Clean flash is Neccessay.....as for the lockscreen app,Use the C locker app attached below,It the pro version with license provoke disabled....
Cab you write the steps please? It would be far better, so anyone who see the steps can figure out something wrong in order to fix fingerprint
JellyRoll-96 said:
Cab you write the steps please? It would be far better, so anyone who see the steps can figure out something wrong in order to fix fingerprint
Click to expand...
Click to collapse
Well it's quiet lenghty....
syedmuaaz87 said:
Well it's quiet lenghty....
Click to expand...
Click to collapse
Please share the procedure, your way is unusual.
30-35min for actually doing it is less than
backing up my rom,
restoring yours and
restoring my data over it...
Besides I use philz touch recovery, not TWRP...
So you understand the silence here...
But I really hope it is working! :fingers-crossed:
or1m said:
Please share the procedure, your way is unusual.
30-35min for actually doing it is less than
backing up my rom,
restoring yours and
restoring my data over it...
Besides I use philz touch recovery, not TWRP...
So you understand the silence here...
But I really hope it is working! :fingers-crossed:
Click to expand...
Click to collapse
No don't restore your data after restoring my backup....And well It requires a dirty flash of the insanity rom over the stock rom and the app optimization takes about 20 to 25 minutes for both the roms because first you must be on pure stock which has been factory reset,than add you're fingerprints and enable C locker or Cmlocker in services and set screen lock to none,after that dirty flash insanity rom over it,after it optimizes and boots up you will end up on your boot screen with a message stating settings,music,clock and google partner setup have stopped working,after that you have to open up root explorer and replace a couple system files with the stock rom files,these include Settingprovider,Secsettings,health service and clock package in the System/Priv-app directory and set the correct permissions and also renaming these files as the orignal ones,after that you have to place the settingsmaps and settingssearchprovidor folder in system/app and set correct permissions for them,After that reboot and let these apps optimize....Voila your done,your settings app will start working and you will be able to add fingerprints but you can not use them on the stock lockscreen because of the bug in the System ui stated in the Post....that is why you have to use cm locker or c locker and you have to download them and enable then while you are on stock because the settings app crashes on certain toggles while it is on insanity rom....Here is the Tutorial,Happy?
syedmuaaz87 said:
...l,Happy?
Click to expand...
Click to collapse
well, maybe; I had once dirty flashed insanity over stock,
I could use fingerprint in apps, but could not change the fingerprints in settings (FCs) nor lockscreen, obviously.
So I am not scared of your method,
even I think it will go through the process with my data left intact,
cause I am on (almost) stock now.
I like Insanity a lot, but fingerprint is a real deal-breaker to me.
according to your steps, you could create flashable zip with those stock (original) apps.
you know, permissions, replacement of files etc.. it is easier that way..
thx
@syedmuaaz87
I need the Fix without all this backup , pls shear the fix only
or1m said:
well, maybe; I had once dirty flashed insanity over stock,
I could use fingerprint in apps, but could not change the fingerprints in settings (FCs) nor lockscreen, obviously.
So I am not scared of your method,
even I think it will go through the process with my data left intact,
cause I am on (almost) stock now.
I like Insanity a lot, but fingerprint is a real deal-breaker to me.
according to your steps, you could create flashable zip with those stock (original) apps.
you know, permissions, replacement of files etc.. it is easier that way..
thx
Click to expand...
Click to collapse
No i don't think it will work because there is a reason we start from the stock rom and add fingerprints on stock rom,If we start clean on insanity and replace the settings app with the stock one and reboot,the settings app does not work at all,I don't know the real problem here,maybe it's the cache of the stock settings app or maybe something else,the devs know better....Hope they fix it permanently....
salah eltony said:
@syedmuaaz87
I need the Fix without all this backup , pls shear the fix only
Click to expand...
Click to collapse
I've shared the whole procedure,try it out yourself....I shared this backup to make things easy for you guys....
This file 1.64 gega
Why ???
Is this the rom and the fix
The rom only 986 mega
I am sorry but i dont know how to insall this
Sent from my SM-G935F using XDA-Developers mobile app
I do not understand anything, so difficult is it to make a zip so that we can to flash?
---------- Post added at 04:17 PM ---------- Previous post was at 04:11 PM ----------
Help for install
Macamoca said:
This file 1.64 gega
Why ???
Is this the rom and the fix
The rom only 986 mega
I am sorry but i dont know how to insall this
Sent from my SM-G935F using XDA-Developers mobile app
Click to expand...
Click to collapse
It also contains the data which neccessary to fix the Fingerprint scanner....Extract it and place the twrp folder in the internal storage of the device and restore,Do no restore your own backup or even data after restoring this backup,the fix might not work if you do so....
Frankiii said:
I do not understand anything, so difficult is it to make a zip so that we can to flash?
---------- Post added at 04:17 PM ---------- Previous post was at 04:11 PM ----------
Help for install
Click to expand...
Click to collapse
whats difficult?Just extract the TWRP folder and place it in the Internal or external storage,boot in to twrp and restore back up from there,It will ask you for a password,the password is qwerty09....
syedmuaaz87 said:
No i don't think it will work because there is a reason we start from the stock rom and add fingerprints on stock rom,If we start clean on insanity and replace the settings app with the stock one and reboot,the settings app does not work at all,I don't know the real problem here,maybe it's the cache of the stock settings app or maybe something else,the devs know better....Hope they fix it permanently....
Click to expand...
Click to collapse
I see, but I cannot live without my data, so I will try...
But again, when I replace SecSetting, I will loose a s7 charm and settings, right?
or1m said:
I see, but I cannot live without my data, so I will try...
But again, when I replace SecSetting, I will loose a s7 charm and settings, right?
Click to expand...
Click to collapse
Don't worry the settings app can be themed using themes...
syedmuaaz87 said:
I've shared the whole procedure,try it out yourself....I shared this backup to make things easy for you guys....
Click to expand...
Click to collapse
It will be easy to us if u gives me only the fix , i cant download all this backup , i have bad internet here , for everything thanx for ur hard work
Shoud i make full wipe before restore ?
Sent from my SM-G935F using XDA-Developers mobile app
Anyone tried it?I've got good news^I have finally made a rom with the modified settings,just flash in,0.99gb size...i will start uploading in a few hours....
OMG.. .simply setups. Extract the zip to SD card. After in recovery restore the rom... Simply.
nunofgrd said:
OMG.. .simply setups. Extract the zip to SD card. After in recovery restore the rom... Simply.
Click to expand...
Click to collapse
Shoud i make full wipe before the restore
Sent from my SM-G935F using XDA-Developers mobile app
I got an idea for a new tool
where you can copy and past APKs for a certain folder and the tool will create a new flashable zip for you.
it could be awesome.
AndroServ said:
... tool will create a new flashable zip for you...
Click to expand...
Click to collapse
Look in the play store: 'zipme'
NLBeev said:
Look in the play store: 'zipme'
Click to expand...
Click to collapse
doesnt work for me
last update: May 25, 2013 LOL
AndroServ said:
doesnt work for me
last update: May 25, 2013 LOL
Click to expand...
Click to collapse
Same here. Select file working; but zip is not created. (Can't find).
Hi,
No problems here with ZipMe. Only thing that doesn't work (actually it never worked) is including app data. It gets lost when flashing the zip because of linking stuff.
Droidphilev said:
... It gets lost when flashing the zip because of linking stuff.
Click to expand...
Click to collapse
I didn't manage to create a zip. Selecting files of different format works; but no 'zip results'
NLBeev said:
I didn't manage to create a zip. Selecting files of different format works; but no 'zip results'
Click to expand...
Click to collapse
Did you gave it storage permission?
Su granted; but uninstalled. Still using your 'PM'.
But I will try again and do trial.error and set permissions.
NLBeev said:
Su granted; but uninstalled. Still using your 'PM'.
But I will try again and do trial.error and set permissions.
Click to expand...
Click to collapse
i *think* that the permission is the problem as the app was never updated for MM. It doesn't ask for this permission AFAIK.
Titanium backup has an option to build a flash able zip from app backups. It's under menu->special features->create update.zip. I believe that installs app data as well.
Hello,
I had Youtube Vanced Black installed and it suddenly disappeared (official youtube app isn't installed).
I tried uninstalling via magisk, but after reboot it still is in the list of modules.
Googleing, I found uninmod, I installed it (v4) without issues, but when running it in terminal I got the following message:
Code:
/sbin/ininmod: line 41: setup_bb: not found
Magisk Module Uninstaller
magisk.img not mounted
Unmounting partitions
Any help please?
BTW, I'm on a Huawei pra-lx3 under RR ROM v5.8.5 and latest version of magisk.
kurokirasama said:
Hello,
I had Youtube Vanced Black installed and it suddenly disappeared (official youtube app isn't installed).
I tried uninstalling via magisk, but after reboot it still is in the list of modules.
Googleing, I found uninmod, I installed it (v4) without issues, but when running it in terminal I got the following message:
Code:
/sbin/ininmod: line 41: setup_bb: not found
Magisk Module Uninstaller
magisk.img not mounted
Unmounting partitions
Any help please?
BTW, I'm on a Huawei pra-lx3 under RR ROM v5.8.5 and latest version of magisk.
Click to expand...
Click to collapse
That is because uninmod don't work for magisk v19. You could try to manually delete though by going to root/sbin/magisk/modules. Then reboot.
Mysticblaze347 said:
That is because uninmod don't work for magisk v19. You could try to manually delete though by going to root/sbin/magisk/modules. Then reboot.
Click to expand...
Click to collapse
I do that on recovery?
EDIT: I dont have that directory
kurokirasama said:
I do that on recovery?
EDIT: I dont have that directory
Click to expand...
Click to collapse
The actual location is /data/adb/modules.
Didgeridoohan said:
The actual location is /data/adb/modules.
Click to expand...
Click to collapse
My bad, wasn't sure there were more areas.
---------- Post added at 10:31 PM ---------- Previous post was at 10:30 PM ----------
kurokirasama said:
I do that on recovery?
EDIT: I dont have that directory
Click to expand...
Click to collapse
You can do that with a root exploring app
Mysticblaze347 said:
My bad, wasn't sure there were more areas.
---------- Post added at 10:31 PM ---------- Previous post was at 10:30 PM ----------
You can do that with a root exploring app
Click to expand...
Click to collapse
I found it on /sbin/.cores/modules. I deleted the directory, reboot, re-installed trough magisk manager, reboot, and it is still missing, even tough it appears in the list of modules.....
kurokirasama said:
I found it on /sbin/.cores/modules. I deleted the directory, reboot, re-installed trough magisk manager, reboot, and it is still missing, even tough it appears in the list of modules.....
Click to expand...
Click to collapse
Try Didgeridoohan's way as quoted above
Mysticblaze347 said:
Try Didgeridoohan's way as quoted above
Click to expand...
Click to collapse
OK, I tried it too and no luck... youtube still missing T_T
kurokirasama said:
OK, I tried it too and no luck... youtube still missing T_T
Click to expand...
Click to collapse
https://www.didgeridoohan.com/magisk/MagiskHelp
kurokirasama said:
OK, I tried it too and no luck... youtube still missing T_T
Click to expand...
Click to collapse
My other idea is try to reinstall thru downloads in magisk and then go to the modules and delete if it let's you
Mysticblaze347 said:
My other idea is try to reinstall thru downloads in magisk and then go to the modules and delete if it let's you
Click to expand...
Click to collapse
already tried that, but after reboot the module is still present, that's why i have to delete manually
kurokirasama said:
already tried that, but after reboot the module is still present, that's why i have to delete manually
Click to expand...
Click to collapse
Well, last thing I can think of is go to all folders under DATA or SYSTEM and delete all the YouTube's that you see, modules or system based. Other than that I am not sure, maybe you could try a downgraded version of Magisk and retry the unimod. Wish I could help more.
Mysticblaze347 said:
Well, last thing I can think of is go to all folders under DATA or SYSTEM and delete all the YouTube's that you see, modules or system based. Other than that I am not sure, maybe you could try a downgraded version of Magisk and retry the unimod. Wish I could help more.
Click to expand...
Click to collapse
no problem, the thing is i can manually uninstall, but the problem is that after installing it, it doesn't appear anywhere T_T
By
kurokirasama said:
no problem, the thing is i can manually uninstall, but the problem is that after installing it, it doesn't appear anywhere T_T
Click to expand...
Click to collapse
Well I'm guessing you already made sure that the official YouTube app is not updated. If so uninstall update and try again.
Mysticblaze347 said:
Well I'm guessing you already made sure that the official YouTube app is not updated. If so uninstall update and try again.
Click to expand...
Click to collapse
yup, it's not even installed...