Help! Is there an firmware img-file for the mate s? - Huawei Mate S

I just bricked my mate s, I think ...
I opened the bnootloader, installed twrp and then wanted to install root... after this my mate s is in a bootloop... I just can access fastboot...
So is there a chance to flash a full system image to my phone? Thanks for your help!
*edit*
Found the access to recovery by pressing Vol+ and Vol- at the same time and flashed supersu again. Now everything works fine again!

Related

[Q] can´t flash update.app please help

please help, i can´t flash an original firmware with original recovery.
now i´m on x rom v2.
i can flash roms with twrp.
my goal is to flash my rom 3.3
therefore i want to flash original b609 emui 3 first.
but it doesn´t work.
i think the problem migt be, that i haven´t the right original recovery (and bootloader)?
tried to install b609 original recovery with fastboot.
seemed to be ok, but if i want to enter in recovery mode with pressing vol+ and vol- and power while phone is of, the phone just starts normally. same thing if i do a local update in settings, phone just reboots.
the dload folder with the update,app is in the root of sdcard and internal sdcard too. but tried both ways too..
please help!
sorry for bad english
wuffi123 said:
please help, i can´t flash an original firmware with original recovery.
now i´m on x rom v2.
i can flash roms with twrp.
my goal is to flash my rom 3.3
therefore i want to flash original b609 emui 3 first.
but it doesn´t work.
i think the problem migt be, that i haven´t the right original recovery (and bootloader)?
tried to install b609 original recovery with fastboot.
seemed to be ok, but if i want to enter in recovery mode with pressing vol+ and vol- and power while phone is of, the phone just starts normally. same thing if i do a local update in settings, phone just reboots.
the dload folder with the update,app is in the root of sdcard and internal sdcard too. but tried both ways too..
please help!
sorry for bad english
Click to expand...
Click to collapse
Try to put the update.zip in the dload folder. Then go to local update.
That did the trick for me.
By the way: you enter recovery by: volume + and power. Hold the power button untill the phone vibrates. Then release the power button but hold the volume +
Same issue. I rooted and installed TWRP, bootloader is unlocked. My version is L10. I can't seem to get any rom to work though. Tried updating to emui 3.0. boot loop. Tried flashing myrom 3.3. boot loop. Tried fastboot flashing recovery to stock 609 recovery, now recovery won't load. flash back to twrp, and it works. I am going to try this update.zip thing, but please let me know if there is a way to safely get to a new rom. Stuck with emui 2.3 or whatever, is very annoying. b127, and it won't download an ota, says it's already latest version

Hard Brick L-19

Hello guys
Need your help or ideas
So i Hard Bricked my P9 i can only enter fastboot.
Phone was on Android N first build,flashed it with TWRP,but i dint have stock app likes camera calculator e.t.c
Phone was working OK but i whanted to get original camera.
So there was made TWRP for android N, i flashed it TWRP worked system was booting, but TWRP not mounting /data, so there was tuto for fix that.
Need to flash zip -> repair /data -> resize ( thats was begining of problem )
zip was success, but format and repair was with error 4
system not booting anymore stuck on bootloop, with twrp.
Tried re-flash N with TWRP dint helped . Only lost TWRP
So i flashed L19C432B136 with dload. update was success, but I don't know why system wast booting, there was no orginal recovery i can't enter it or update with dload.
Stuck in screen "Phone is unlocked and can't be trusted"
Flashing TWRP for MM or N is success but phone don't enter IT
Flashing stock recovery from B136 dint helped ( i tried stock recovery from B322 ; no success)
Tried flashing SYSTEM.img BOOT.img RECOVERY.img from 322, all is sucess but phone not skipping screen ( Phone is unlocked and can't be trusted )
Any idea how to get phone back from dead?
I can only enter fastboot.
Is i possible to flash something true fastboot?
I have full updates of L19C432B182 and L19C432B161.
richish said:
Hello guys
Need your help or ideas
So i Hard Bricked my P9 i can only enter fastboot.
Phone was on Android N first build,flashed it with TWRP,but i dint have stock app likes camera calculator e.t.c
Phone was working OK but i whanted to get original camera.
So there was made TWRP for android N, i flashed it TWRP worked system was booting, but TWRP not mounting /data, so there was tuto for fix that.
Need to flash zip -> repair /data -> resize ( thats was begining of problem )
zip was success, but format and repair was with error 4
system not booting anymore stuck on bootloop, with twrp.
Tried re-flash N with TWRP dint helped . Only lost TWRP
So i flashed L19C432B136 with dload. update was success, but I don't know why system wast booting, there was no orginal recovery i can't enter it or update with dload.
Stuck in screen "Phone is unlocked and can't be trusted"
Flashing TWRP for MM or N is success but phone don't enter IT
Flashing stock recovery from B136 dint helped ( i tried stock recovery from B322 ; no success)
Tried flashing SYSTEM.img BOOT.img RECOVERY.img from 322, all is sucess but phone not skipping screen ( Phone is unlocked and can't be trusted )
Any idea how to get phone back from dead?
I can only enter fastboot.
Is i possible to flash something true fastboot?
I have full updates of L19C432B182 and L19C432B161.
Click to expand...
Click to collapse
You have 2 choices with this.
If you can still boot into TWRP,
1. Flash the Beta Update.zip
2. Power off phone.
3. Press up button whilst powering up phone.
4. You will now be in stock recovery and you can perform a factory reset.
5. the device will now boot in to N beta but will be missing the vendor apps.
There is another way to fix if this doesn't work. Tell me if this method works first.
Edit: I just read in the op that you flashed the update and had stock recovery.
The reason it won't boot is because you need to have b322 flashed and you have to factory reset to repair the corrupt file system. To do this follow these instructions.
1. You need to flash the Boot, Recovery and System images from b322 in fastboot.
2. Then enter stock recovery (Vol + and Power)
3. Then factory reset (this is essential as it repairs the file system and enables boot)
4. The device will then boot.
5. (Optional )If you want to go back from the beta you have to flash the rollback.app to b300 through th dload method first then you can flash a Android 6.0 through the dload method.
Regards
Lee
thel2dab said:
You have 2 choices with this.
If you can still boot into TWRP,
1. Flash the Beta Update.zip
2. Power off phone.
3. Press up button whilst powering up phone.
4. You will now be in stock recovery and you can perform a factory reset.
5. the device will now boot in to N beta but will be missing the vendor apps.
There is another way to fix if this doesn't work. Tell me if this method works first.
Regards
Lee
Click to expand...
Click to collapse
Cant Enter TWRP
noone of recoverys work
richish said:
Cant Enter TWRP
noone of recoverys work
Click to expand...
Click to collapse
Edited my previous post with another method.
thel2dab said:
Edited my previous post with another method.
Click to expand...
Click to collapse
fast qestion
there is 2 recoverys, does both need to be flashed?
@richish
If you get really stuck I can teamviewer your pc and help.
Or you can facebook message me direct.
I had exactly the same issue when I first tried to flash the properdatafix with TWRP for N
Regards
---------- Post added at 10:26 PM ---------- Previous post was at 10:24 PM ----------
richish said:
fast qestion
there is 2 recoverys, does both need to be flashed?
Click to expand...
Click to collapse
You can flash both.
fastboot flash recovery recovery.img
fastboot flash recovery2 recovery2.img
I don't think it is essential but it won't hurt to do it anyway.
---------- Post added at 10:35 PM ---------- Previous post was at 10:26 PM ----------
[/COLOR @richish
I seen you PM. I am not sure it will wok by flashing B182. I think you have to flash B322 first.
Regards
fist you have to flash stock recovery from emui 5(android N) through fastboot.
second , download the rollback package,extract it and put it on dload folder of external storage.
third, turn off the phone , and press vol up + vol down + power button together to enter forced update mode.
if it is successful system will boot and you should flash android M firmware using dload method then u should unlock bootloader,install twrp,wipe /system /cache /data and then flash update.zip(android N) and hw_data of your firmware one after another.
i hope this help you.
still phone is not booting
I redownload b322, extracted Boot.img System.img Recovery.img Recovery2.img and Cust.img with
http://forum.xda-developers.com/showthread.php?t=2433454 Update Extractor
Flashed all .img true fastboot
But still nothing
Stuck on bootloader screen "Your device is unlocked, and can't be trusted"
Maybe i need flash some more images from b322.
Its look like phone cant pass bootloader.
Any sugestions?
P.S. Phone still have warranty, but booloader is unlocked
and fastboot oem relock ************** ends with failed.
"Failed - root cant trusted"
Sugestions how to lock it?
I had my phone bricked from testing cm, and going back to stock. My solution was to flash dload and recovery from the 182, followed by dload flash of 182.
@richish
caution : these commands will format the partition
can u use these command ?
"fastboot format /system"
"fastboot format /data"
or "fastboot erase /system"=> this will erase system partition
Phone is live now.
I downloaded DC-Phoenix and bought 15 credits
flashed stock B182 via DC-phoenix and phone booted.
I recomand this apllication for everybody who have similar problems.
THX for everybody who helpped.
richish said:
Phone is live now.
I downloaded DC-Phoenix and bought 15 credits
flashed stock B182 via DC-phoenix and phone booted.
I recomand this apllication for everybody who have similar problems.
THX for everybody who helpped.
Click to expand...
Click to collapse
How can i sign up for an account, it alway said wrong username or password !:crying:
DC-Phoenix is not cheap but it also cured my phone after bricking it with flashfire where all other methods did not work.
if you use it follow the instructions carefully and do the 2 step flashing although it will work after the first one. if you don`t do the second flash the partition sizes are wrong and a dload update will fail.
smartmobee said:
How can i sign up for an account, it alway said wrong username or password !:crying:
Click to expand...
Click to collapse
First u must buy credits, activate your account in email and then login in aplication.
Hi everyone
I would like to share the problem that i am having with my p9 , so maybe i can get your help.
Firstly i had L19C185 version and i changed Oeminfo in order to install c636 Beta 7.0 Nougat.
I installed the nougat but then realized that i dont have stock apps in my phone, so by mistakely tried to install TWRP for 6.0 Marshmallow and my problem started here.
Now my phone can not boot. its stuck in Phone is booting now ( the screen when you unlock bootloader after huawei logo) , and its never booting. it stays like that.
I tried to flash rboot.img , recovery.img and System.Img from fast boot. but whenever im trying to flash system.img after boot and recovery.img, a get an error and never succeeded to flash system.img. Im trying to flash these .img files from L19C636b180.
Can you please help me or give me some advice because none of mobile services couldnt fix and flash new software. maybe because they dont know exactly what should they do. and in my country i couldnt find anyofficial huawei service provider.
Please help me how to fix my phone.
I also had serious problems with flashing the thing back to stock.
TWRP was broken too for me.
I've done that to fix it all
The ONLY way that worked for me was
1. Download EVA-L19C636B168 from here http://forum.xda-developers.com/p9/development/rom-stock-rom-eva-l19c636b168-t3419586
2. Download that SRK tool http://forum.xda-developers.com/p9/development/tool-srk-tool-huawei-bootloader-root-t3374068
3. Flash the recovery from the SRK tool, you can do that with the tool or directly via fastboot (i don't know other proper source for the correct recovery img)
4. Put the image EVA-L19C636B168 (UPDATE.app) in the "dload" folder of your sd card
5. Start phone in dload mode (Hold all 3 buttons at start) and let the update do it's job
What about recovery??? Does 3 button combination works? Whats heppens if u hold volup and power button when turning phone on!
Situation looks similar what i had.
Only solution for me was dc-phoenix.
U have tu buy 15 points to flash phone (15eur) But it works.
I'm 99% sure that there are bootloader comands what is same as for dc-phoenix,but i dont know them.
Sent from my EVA-L19 using XDA-Developers mobile app
please help
i had bricked my p9 L09 twrp not working noting working only fastboot mode is working plzzz help me in finding boot.img recovery.img system.img

[SOLVED] Stuck with TWRP - Can't flash OTA package

Hey everyone !
I have a rooted Honor 5C NEM-L51 (European variant) with TWRP custom recovery and, as some of you may know, Nougat update is now available to download using Huawei Firware Finder.
However, a stock recovery is needed in order to get OTA updates and since I couldn't find a stock recovery image by browsing the web, I decided to go back to a full stock ROM.
So I tried to do this the usual way : creating a dload folder, placing the update.app file in it, powering off the phone and back on by pressing simultaneously the volume up, down and power button... but this always lead me right to TWRP, no matter how many times I tried. I restored my phone from soft brick using this method about two months ago with no issue, but now I can't get it to work, even if I release the power button once the phone boots or do any other shady manipulation. Could this have anything to do with the latest TWRP update ?
I also tried to do the "Power on method" by dialing " *#*#2846579#*#*" to go to the project menu and flash the file from here, but it rebooted to TWRP...
I'm at a complete loss here. Can anyone please help me with this ?
just install recovery img and other needed image files from stock firmware thru adb....
thelous said:
just install recovery img and other needed image files from stock firmware thru adb....
Click to expand...
Click to collapse
Thank you for answering. The problem is, I don't know where to find stock recovery image, all I can find with Huawei Firmware Finder is the full stock ROM. Browsing the web didn't help so far.
Can I flash the whole ROM through ADB ?
Zarou said:
Thank you for answering. The problem is, I don't know where to find stock recovery image, all I can find with Huawei Firmware Finder is the full stock ROM. Browsing the web didn't help so far.
Can I flash the whole ROM through ADB ?
Click to expand...
Click to collapse
Extract the update.app of full stock rom using huawei update extractor. There u will find recovery.img. Extract it and flash using fastboot.
Shubho20 said:
Extract the update.app of full stock rom using huawei update extractor. There u will find recovery.img. Extract it and flash using fastboot.
Click to expand...
Click to collapse
I did that and then tried to install the update through the dialer. It rebooted and I'm stuck on "Your device is booting now..." screen. Can't even turn it off, it reboot automatically to this screen. Seems like there is no recovery at all and it tried to do the update through this inexistant recovery no matter how many times it reboot...
What can I do now ?
Zarou said:
I did that and then tried to install the update through the dialer. It rebooted and I'm stuck on "Your device is booting now..." screen. Can't even turn it off, it reboot automatically to this screen. Seems like there is no recovery at all and it tried to do the update through this inexistant recovery no matter how many times it reboot...
What can I do now ?
Click to expand...
Click to collapse
Don't do it through the dialer. After flashing the stock recovery, just restart and then try the three button configuration(volume up + volume down + power)
Shubho20 said:
Don't do it through the dialer. After flashing the stock recovery, just restart and then try the three button configuration(volume up + volume down + power)
Click to expand...
Click to collapse
I can't. I am stuck on the "Your device is booting now..." screen. If I turn it off, it automatically turns on again to this screen.
Edit : Nevermind, looks like I didn't press the button correctly. Only the recovery was missing, I finally could boot to system by pressing the power button. Then I reinstalled TWRP with ADB and restored my nandroid backup. Back to the start...
I may have a hint about what went wrong. Extracting the Nougat UPDATE.APP file gave me two recovery files : recovery.img and recovery2.img. I only flashed the first. Any idea why there were two of them ? I am going to try with the FULLOTA-MF file (tried with the FULLOTA-MF-PV file before), or maybe should I try to extract files from the previous update ?
EDIT 2 : Still stuck with TWRP. I extracted several UPDATE.APP files and all have two RECOVERY.IMG files. I tried flashing them both, one after another and then reboot to erecovery, but TWRP is still here. How can I get rid of it and get back to stock recovery please ?
Zarou said:
I can't. I am stuck on the "Your device is booting now..." screen. If I turn it off, it automatically turns on again to this screen.
Edit : Nevermind, looks like I didn't press the button correctly. Only the recovery was missing, I finally could boot to system by pressing the power button. Then I reinstalled TWRP with ADB and restored my nandroid backup. Back to the start...
I may have a hint about what went wrong. Extracting the Nougat UPDATE.APP file gave me two recovery files : recovery.img and recovery2.img. I only flashed the first. Any idea why there were two of them ? I am going to try with the FULLOTA-MF file (tried with the FULLOTA-MF-PV file before), or maybe should I try to extract files from the previous update ?
EDIT 2 : Still stuck with TWRP. I extracted several UPDATE.APP files and all have two RECOVERY.IMG files. I tried flashing them both, one after another and then reboot to erecovery, but TWRP is still here. How can I get rid of it and get back to stock recovery please ?
Click to expand...
Click to collapse
I have flashed several times Twrp recovery on my honor 5c, and i didn't even had to flash the stock recovery to get back to stock rom. I had placed the dload folder with full update in it, and used the 3 button method to flash the full rom. And i was once again in full stock including recovery. Try this. If it doesn't help, just flash the stock recovery. Then type fastboot reboot, let it boot. Then power it off. Now press volume up + power button. Just see which recovery it boots.
Shubho20 said:
I have flashed several times Twrp recovery on my honor 5c, and i didn't even had to flash the stock recovery to get back to stock rom. I had placed the dload folder with full update in it, and used the 3 button method to flash the full rom. And i was once again in full stock including recovery. Try this. If it doesn't help, just flash the stock recovery. Then type fastboot reboot, let it boot. Then power it off. Now press volume up + power button. Just see which recovery it boots.
Click to expand...
Click to collapse
As I said, the three buttons method is not working and boot right into TWRP.
Which stock recovery ? There are two of them. Anyway, I tried this again, it led me back to the endless "Your device is booting now..." screen.
Okay, trouble's gone real now. I tried to flash the boot image from the update using fastboot. Now I'm stuck in "Your device is booting now..." no matter what I do...
Zarou said:
Okay, trouble's gone real now. I tried to flash the boot image from the update using fastboot. Now I'm stuck in "Your device is booting now..." no matter what I do...
Click to expand...
Click to collapse
Try the volume up + power button. Just see it's booting into recovery or not
Shubho20 said:
Try the volume up + power button. Just see it's booting into recovery or not
Click to expand...
Click to collapse
Worked. But guess what ? In TWRP. ><
But at least I can restore my system... Still, I don't understand this whole situation, why is TWRP always coming back ? I'd really like to get to flash this OTA update...
Zarou said:
Worked. But guess what ? In TWRP. ><
But at least I can restore my system... Still, I don't understand this whole situation, why is TWRP always coming back ? I'd really like to get to flash this OTA update...
Click to expand...
Click to collapse
Tell me the whole process what u r doing.
Shubho20 said:
Tell me the whole process what u r doing.
Click to expand...
Click to collapse
Well, I tried with or without uninstalling SuperSU which has an option to try to restore stuck boot and recovery images (which didn't work in my case).
I used adb to reboot into bootloader, from where I flashed either RECOVERY.IMG or RECOVERY.IMG and then RECOVERY2.IMG which I got from Huawei Update Extractor and reboot from fastboot. Then I tried to power off and back on my device by pressing volumes up and power button which led me to TWRP or endless booting screen. Flashing boot image from Update file gave me the same result.
Zarou said:
Well, I tried with or without uninstalling SuperSU which has an option to try to restore stuck boot and recovery images (which didn't work in my case).
I used adb to reboot into bootloader, from where I flashed either RECOVERY.IMG or RECOVERY.IMG and then RECOVERY2.IMG which I got from Huawei Update Extractor and reboot from fastboot. Then I tried to power off and back on my device by pressing volumes up and power button which led me to TWRP or endless booting screen. Flashing boot image from Update file gave me the same result.
Click to expand...
Click to collapse
Okay. What rom u r in now? And which twrp r u using?
Shubho20 said:
Okay. What rom u r in now? And which twrp r u using?
Click to expand...
Click to collapse
Official stock ROM with TWRP 3.1.0.0.
Zarou said:
Official stock ROM with TWRP 3.1.0.0.
Click to expand...
Click to collapse
Emui version?
Shubho20 said:
Emui version?
Click to expand...
Click to collapse
4.1.2.
Zarou said:
4.1.2.
Click to expand...
Click to collapse
Flash the meticulus twrp. Then repeat the dload process. See if that helps.
Shubho20 said:
Flash the meticulus twrp. Then repeat the dload process. See if that helps.
Click to expand...
Click to collapse
Did that. I even flashed the previous version of the official TWRP beforehand. Still nothing. I even wiped everything from TWRP except internal storage and external SD card and still, the three buttons method led me right back to Meticulus TWRP.
However, I did notice something very strange. If I boot normally by pressing the power button and then, on the "Your device has been unlocked and can't be trusted" screen, press the volume up button to "boot into erecovery to restore my device", it boots into... official TWRP 3.1.0.0 !!! What the hell ?!
Do you have any idea ? This whole situation is so weird...
EDIT : This is just complete nonsense. I even wiped the internal storage and this abomination of TWRP 3.1.0.0 was still there. I really am at a complete loss here. ><

Hard brick nem-l21

Hi, i think my honor 5 c is hard bricked. i cant acces stock recovery nor twrp recovery. First i wiped system to install emui 5.0 but it didn't worked. then i tried another recovery but i didn't start. So i replaced stock recovery with twrp that also didn't worked. I tried to flash system through fastboot but it didn't worked neither. Then i don't know why i relocked my bootloader because i thought it will restore stock recovery but it didn't. So now i'm stuck with no fastboot no recovery and no system . i cant install system with dload method because i deleted erecovery. Phone is stuck on logo. Please help
Please help i don't know what to do
Pro of a pro said:
Please help i don't know what to do
Click to expand...
Click to collapse
So,I think you are f...ed.I've been is the same situation(not really).My phone was bricked but I used Team MT tool to unbrick it.You could try Team MT tool.Good Luck.
Pro of a pro said:
Hi, i think my honor 5 c is hard bricked. i cant acces stock recovery nor twrp recovery. First i wiped system to install emui 5.0 but it didn't worked. then i tried another recovery but i didn't start. So i replaced stock recovery with twrp that also didn't worked. I tried to flash system through fastboot but it didn't worked neither. Then i don't know why i relocked my bootloader because i thought it will restore stock recovery but it didn't. So now i'm stuck with no fastboot no recovery and no system . i cant install system with dload method because i deleted erecovery. Phone is stuck on logo. Please help
Click to expand...
Click to collapse
unlock it and install stock recovery?
well i cant get to fastboot because battery is drained lol
Pro of a pro said:
well i cant get to fastboot because battery is drained lol
Click to expand...
Click to collapse
Charge the batrery, unlock the bootloader, install twrp from p9 lite section, boot to twrp, and flash the custom roms or download the rom given in rom section of p9 lite, may be arsenik and restore it in twrp.
Check the repository is thread in my signature.

Do i have twrp? can i flash xiaomi.eu from here?

Hi guys
so im kinda noob in software and stuff so i wanted to go easy.
I downloaded xiaomitoolv2 and i unlocked the bootloader , afetr waiting 1 week.
Then i tried to flash twrp, the phone rebooted , everything ok.
then it booted fine , i went again in dev options allow usb debbuging , and i tried to boot in recovery .
it showed MI recovery 3.0 and i wasnt able to boot , i got stuck in recovery menu.
then i wipe data and it booted fine again.
tried to flash again twrp. with the same problem , didnt boot in twrp.
Now , how can i install xiaomi.eu ?? i cant access to twrp...
Can i install xiaomi.eu from xiaomitools withowt boot in twrp?
By the way , i dont know how to use adb
thanks and sorry for my english
DMart9406 said:
Hi guys
so im kinda noob in software and stuff so i wanted to go easy.
I downloaded xiaomitoolv2 and i unlocked the bootloader , afetr waiting 1 week.
Then i tried to flash twrp, the phone rebooted , everything ok.
then it booted fine , i went again in dev options allow usb debbuging , and i tried to boot in recovery .
it showed MI recovery 3.0 and i wasnt able to boot , i got stuck in recovery menu.
then i wipe data and it booted fine again.
tried to flash again twrp. with the same problem , didnt boot in twrp.
Now , how can i install xiaomi.eu ?? i cant access to twrp...
Can i install xiaomi.eu from xiaomitools withowt boot in twrp?
By the way , i dont know how to use adb
thanks and sorry for my english
Click to expand...
Click to collapse
After flashing TWRP u need to press volume up button + power button at the same time . Release fingers after vibration. Then format data and flash eu rom
It should show me twrp? By pressing vol+ and power? Because the recovery menu i have is still xiaomi recovery 3.0..
DMart9406 said:
It should show me twrp? By pressing vol+ and power? Because the recovery menu i have is still xiaomi recovery 3.0..
Click to expand...
Click to collapse
Install twrp twice(i am using adb run)
EpickBroVlad said:
Install twrp twice(i am using adb run)
Click to expand...
Click to collapse
Allready did it , i dont know how to use adb
Still with mi recovery

Categories

Resources