Related
Hello Xda... I Can't Connect My bricked Phone to Pc. When i put it and turn it on flash mode it tells that failed to install the device drivers. Seus , PC Companion , Flashtool Can't Recognize it. can anyone help me? Thanks In advance.
First of all how you broke it? Second before you can proceed with seus or any other tool you need to install all drivers for your phone.....
Sent from my E15 using XDA App
dsaklein said:
First of all how you broke it? Second before you can proceed with seus or any other tool you need to install all drivers for your phone.....
Sent from my E15 using XDA App
Click to expand...
Click to collapse
i installed CM7 rom from NaA the new one , without the custom kernel. i can't go to recoveries. how can i fix it ?
eu8umhc said:
i installed CM7 rom from NaA the new one , without the custom kernel. i can't go to recoveries. how can i fix it ?
Click to expand...
Click to collapse
How far does your phone boot-up?
Do you still see something on your screen?
Does the LED still light up (when connected to the charger/USB)?
If you haven't killed the boot-loader you should be able to recover the device with Flashtool ... if the boot-loader is dead I think there's no easy way to resurrect it.
Of course the unsolved question is if it would need a intact kernel as well AND if custom kernels actually support "Flash mode".
B.Jay said:
How far does your phone boot-up?
Do you still see something on your screen?
Does the LED still light up (when connected to the charger/USB)?
If you haven't killed the boot-loader you should be able to recover the device with Flashtool ... if the boot-loader is dead I think there's no easy way to resurrect it.
Of course the unsolved question is if it would need a intact kernel as well AND if custom kernels actually support "Flash mode".
Click to expand...
Click to collapse
i See The Flash Mode Green LEd yes. When I Start it, i see the SOny ericsson logo and it stucks there. i try to connecto to pc and it can't install drivers for device. how can i rescue it? tommorow i have a lesson and i need it :S and also it tells that cant recognized.
B.Jay said:
How far does your phone boot-up?
Do you still see something on your screen?
Does the LED still light up (when connected to the charger/USB)?
If you haven't killed the boot-loader you should be able to recover the device with Flashtool ... if the boot-loader is dead I think there's no easy way to resurrect it.
Of course the unsolved question is if it would need a intact kernel as well AND if custom kernels actually support "Flash mode".
Click to expand...
Click to collapse
Finally I did it! Big Thanks to you. I Installed the drivers and it recognized. big thanks
Well, that's exactly from where Vlackrs and I already recovered our phones after a bad flash ("stuck at the Sony Ericsson logo").
Start Flashtool and select "Check drivers".
If it turns out as "OK" on all three checks it seems you have the drivers installed already.
If not ... try to install Gordon's Gate (should be included with Flashtool and called "ggsetup.exe").
Follow the instructions I wrote up here to restore the device.
Note that I did NOT use Flashtool 0.5 as 0.5.0.0, 0.5.0.1 and 0.5.0.2 failed to recognize the device (and yes, I replaced the "E15.properties" with the files posted in the Flashtool thread in the Development section) - Flashtool 0.2.9.1 did the trick for us.
Edit
eu8umhc said:
Finally I did it! Big Thanks to you. I Installed the drivers and it recognized. big thanks
Click to expand...
Click to collapse
Ok - good you got the driver problem resolved ... seems I was too slow writing up my post.
B.Jay said:
Well, that's exactly from where Vlackrs and I already recovered our phones after a bad flash ("stuck at the Sony Ericsson logo").
Start Flashtool and select "Check drivers".
If it turns out as "OK" on all three checks it seems you have the drivers installed already.
If not ... try to install Gordon's Gate (should be included with Flashtool and called "ggsetup.exe").
Follow the instructions I wrote up here to restore the device.
Note that I did NOT use Flashtool 0.5 as 0.5.0.0, 0.5.0.1 and 0.5.0.2 failed to recognize the device (and yes, I replaced the "E15.properties" with the files posted in the Flashtool thread in the Development section) - Flashtool 0.2.9.1 did the trick for us.
Edit
Ok - good you got the driver problem resolved ... seems I was too slow writing up my post.
Click to expand...
Click to collapse
It's ok . the info you gave me is important. now i will read the link you gave me. Big Thanks Again..
can someone help me please...i restored a backup of gingerdx and after that i'm stuck in SE screen and led not working when connected to pc
Hi i have Xperia T which was fully working and my friend tries to make downgrade with Flashtool... i don't know exacly what he has done i'm trying to get it back alive but Setool didn't recognise the phone original update program also when i connect it to USB it is recognised by pc as Zeus Flash device on other computer as qualcoomm device any idea how i can unbrick it? i have to add pc recognise the phone without pushing any button with volume down or up is the same it is recognised also when i disconnect the battery when i tries to power it up nothing happens please help!!
biegan said:
Hi i have Xperia T which was fully working and my friend tries to make downgrade with Flashtool... i don't know exacly what he has done i'm trying to get it back alive but Setool didn't recognise the phone original update program also when i connect it to USB it is recognised by pc as Zeus Flash device on other computer as qualcoomm device any idea how i can unbrick it? i have to add pc recognise the phone without pushing any button with volume down or up is the same it is recognised also when i disconnect the battery when i tries to power it up nothing happens please help!!
Click to expand...
Click to collapse
calm down. Follow the instrctions in the third thread in the general section about how to recover froma soft brick. Its here
Follow those instructions and post here if you have any problems. Preferably with screen shots of what your PC/Phone is doing.
gregbradley said:
calm down. Follow the instrctions in the third thread in the general section about how to recover froma soft brick. Its here
Follow those instructions and post here if you have any problems. Preferably with screen shots of what your PC/Phone is doing.
Click to expand...
Click to collapse
I will describe what programs showing because i have polish version and maybe you can't understand them:
When i'm trying to connect to pc companion when pc recognise phone i'm geting message PC companion could not connect with device disconnect device and try again
When trying do sof/hard reset nothing happens
When trying to pull in fastboot or flash mode pc recognise phone always the same in conrtol panel ZEUS FLASH device pc also recognise in thisa mode without battery and without pushing any buttons but i'm not geting any led Green or blue only when i'm conecting charger or usb cable WITHOUT battery it blinks red ones
When i'm trying to flash with flashtool or original update service when program is on screen asking me to connect the device i plug usb pc recognising the phone (usb connected device sound) but program doesn't start to flash or even recognise
i have also setool when i'm trying to flash by setool when program is waiting for device connecting bar is moving on down side of window when i connect the phone it is stoping like it tries to connect but nothing happens....
i was thinking to try this but i have cheked battery voltage and it is 3,88 so i thing it is fully charged:
Here are the steps I took successfully revise my phone from soft brick.
Let the phone charge (long long time = 4+ hrs) on wall charger.
Red light on (constantly - not flashing) - charge until red light off (again very long time =16+ hrs)
Unplug from wall
Run flashtool from PC and run flash .111 until it asks to put phone in flashmode
While hold volumn down and plug in USB
Red light will be back on, after a few seconds - flash will run.
Unplug USB then power on - phone will boot and die (it's okay don't worry)
Charge the phone again - after a while (or let it charge full), you can now turn on the phone.
That is all ... Back and running.
GOOD Luck.
Timing = could be different from phone to phone - depends on battery of the phone before it dead.
please do you have any idea? for me it hangs in some kind of boot mode and i don't know how to kick it fromthis and reflash if any screens can help please tell me i will do them
biegan said:
I will describe what programs showing because i have polish version and maybe you can't understand them:
When i'm trying to connect to pc companion when pc recognise phone i'm geting message PC companion could not connect with device disconnect device and try again
When trying do sof/hard reset nothing happens
When trying to pull in fastboot or flash mode pc recognise phone always the same in conrtol panel ZEUS FLASH device pc also recognise in thisa mode without battery and without pushing any buttons but i'm not geting any led Green or blue only when i'm conecting charger or usb cable WITHOUT battery it blinks red ones
When i'm trying to flash with flashtool or original update service when program is on screen asking me to connect the device i plug usb pc recognising the phone (usb connected device sound) but program doesn't start to flash or even recognise
i have also setool when i'm trying to flash by setool when program is waiting for device connecting bar is moving on down side of window when i connect the phone it is stoping like it tries to connect but nothing happens....
i was thinking to try this but i have cheked battery voltage and it is 3,88 so i thing it is fully charged:
Here are the steps I took successfully revise my phone from soft brick.
Let the phone charge (long long time = 4+ hrs) on wall charger.
Red light on (constantly - not flashing) - charge until red light off (again very long time =16+ hrs)
Unplug from wall
Run flashtool from PC and run flash .111 until it asks to put phone in flashmode
While hold volumn down and plug in USB
Red light will be back on, after a few seconds - flash will run.
Unplug USB then power on - phone will boot and die (it's okay don't worry)
Charge the phone again - after a while (or let it charge full), you can now turn on the phone.
That is all ... Back and running.
GOOD Luck.
Timing = could be different from phone to phone - depends on battery of the phone before it dead.
please do you have any idea? for me it hangs in some kind of boot mode and i don't know how to kick it fromthis and reflash if any screens can help please tell me i will do them
Click to expand...
Click to collapse
I want to add when i'm trying to connect for example SE ARC it is recognised as SEMC Flash Device and all programs recognising it
biegan said:
I want to add when i'm trying to connect for example SE ARC it is recognised as SEMC Flash Device and all programs recognising it
Click to expand...
Click to collapse
I forgot to add when i'm doing test point to unlock for example ARC it is also recognised as ZEUS Flash so i thing it stays in some king of boot mode but there is no information in the net how to kick it out or even do jtag because i can doit also but i think it is not supported yet
You have an xperia T, then how can you connect the phone to the PC WITHOUT a battery? It is not removable in the Xperia T!
Have you flashed anything to the device before this happened?
EDIT
Run flashtool from PC and run flash .111 until it asks to put phone in flashmode
Click to expand...
Click to collapse
Which firmware is .111? I dont beleive there has ever been a .111 firmware for the T? Can you give me the post you found that in and the download link, thanks
gregbradley said:
You have an xperia T, then how can you connect the phone to the PC WITHOUT a battery? It is not removable in the Xperia T!
Have you flashed anything to the device before this happened?
EDIT
Which firmware is .111? I dont beleive there has ever been a .111 firmware for the T? Can you give me the post you found that in and the download link, thanks
Click to expand...
Click to collapse
i disassemble the back cover it's very simple the battery connector is on the flex cable i know what i'm talking if you want i can send pics i'am using flashifile LT30p_7.0.A.1.303_CH the most important think that no program is detecting the phone only pc recognising the phone
biegan said:
i disassemble the back cover it's very simple the battery connector is on the flex cable i know what i'm talking if you want i can send pics i'am using flashifile LT30p_7.0.A.1.303_CH the most important think that no program is detecting the phone only pc recognising the phone
Click to expand...
Click to collapse
OK,
Yes thats true but it sounds similar to a problem I have come across before. But this happened when someone flashed the S1 update on the TX instead of the T.
Have you unistalled evrything android/sdk/adb related from your computer and started again.
Also, you can try another machine.
Are you on win8? That has issues with drivers from Sony.
gregbradley said:
OK,
Yes thats true but it sounds similar to a problem I have come across before. But this happened when someone flashed the S1 update on the TX instead of the T.
Have you unistalled evrything android/sdk/adb related from your computer and started again.
Also, you can try another machine.
Are you on win8? That has issues with drivers from Sony.
Click to expand...
Click to collapse
Hi no i didn't try i always use XP for software problems with phones i don't knoiw exacly what he did with the phone you think when i try to do it on clean system should help? i tried on 2 computers and problem is the same i think to general problem is that computer recognising the phone like a ZEUS FLash not SEMC Flash device i think somehow he erase whole flash or write from other model and now i can't do anythink
biegan said:
Hi no i didn't try i always use XP for software problems with phones i don't knoiw exacly what he did with the phone you think when i try to do it on clean system should help? i tried on 2 computers and problem is the same i think to general problem is that computer recognising the phone like a ZEUS FLash not SEMC Flash device i think somehow he erase whole flash or write from other model and now i can't do anythink
Click to expand...
Click to collapse
Yes, it sounds like your friend has done something silly to the phone. Untill we know exactly what he did, and what he tried to flash we are just guessing...
gregbradley said:
Yes, it sounds like your friend has done something silly to the phone. Untill we know exactly what he did, and what he tried to flash we are just guessing...
Click to expand...
Click to collapse
All i know he told me he tries to downgrade the phone to make a root and he was using flashtool is there any other methods/programs which can flash lt30p? i have all service boxes like riff box setool but riff don't make it setool can't start flashing i don't know any testpoint or jtag?
biegan said:
All i know he told me he tries to downgrade the phone to make a root and he was using flashtool is there any other methods/programs which can flash lt30p? i have all service boxes like riff box setool but riff don't make it setool can't start flashing i don't know any testpoint or jtag?
Click to expand...
Click to collapse
I dont know where testpoint is on xperia T as we have never been down that road here.
Has he tried to use EMMA to flash something? That is meant only for unlocked bootloaders, maybe he has messed up with that, but I am onl guessing here and i cant really see why that would do anything to the boot...
Maybe he tried to flash it, dropped it, broke it, and thinks a software hack can help him....
gregbradley said:
I dont know where testpoint is on xperia T as we have never been down that road here.
Has he tried to use EMMA to flash something? That is meant only for unlocked bootloaders, maybe he has messed up with that, but I am onl guessing here and i cant really see why that would do anything to the boot...
Maybe he tried to flash it, dropped it, broke it, and thinks a software hack can help him....
Click to expand...
Click to collapse
No it is 100% software problem he is noob in this and all he told me he trried to root the phone but first he tried to downgrade it with flashtool but if flashtool doens't recognise the phone setool also do you think there is any other option?
biegan said:
No it is 100% software problem he is noob in this and all he told me he trried to root the phone but first he tried to downgrade it with flashtool but if flashtool doens't recognise the phone setool also do you think there is any other option?
Click to expand...
Click to collapse
Not that I know of. Bin4ry is someone who has experience with setool and may be able to help. Try PM'ing him.
Sorry I couldnt be of much more use.
gregbradley said:
Not that I know of. Bin4ry is someone who has experience with setool and may be able to help. Try PM'ing him.
Sorry I couldnt be of much more use.
Click to expand...
Click to collapse
Thanks bro anyway for your help!!
any update about your device...
i have exactly same problem as you mentioned but my device is Xperia V (LT25i)....
waiting for your reply. please do update.
I also had the same problem, my cell phone xperia v. .. please help me .... What can I do now?
bambox said:
I also had the same problem, my cell phone xperia v. .. please help me .... What can I do now?
Click to expand...
Click to collapse
what have you already done to try and fix it?
What did you do to make it not work?
What are the symptoms of your phone?
gregbradley said:
what have you already done to try and fix it?
What did you do to make it not work?
What are the symptoms of your phone?
Click to expand...
Click to collapse
a week ago I upgraded to 4.1.2, and using kernel vKernel_Xperia_V_1.2.5
after 1 week of use, I reboot my xperia v, but do not want to live anymore, Charging not respont, could not power on, flsahmode and fasbootmode.
my xperia v die, but still 70% battery.
on my pc not detect (only ZEUS FLASH DEVICE)
bambox said:
a week ago I upgraded to 4.1.2, and using kernel vKernel_Xperia_V_1.2.5
after 1 week of use, I reboot my xperia v, but do not want to live anymore, Charging not respont, could not power on, flsahmode and fasbootmode.
my xperia v die, but still 70% battery.
on my pc not detect (only ZEUS FLASH DEVICE)
Click to expand...
Click to collapse
put it on charge for 24 hours and leave it alone.
after the 24 hours turn it on.
Hey people!i need help here!i have an xperia v with bootloader unlocked and last day i flashed an img kernel of cyanogenmod with flashify...all worked good until reboot...when i pressed reboot my phone didn't started anymore.when i try to power up nothing happens no leds no fastboot nothing!what can i do to fix it????please help
sash89 said:
Hey people!i need help here!i have an xperia v with bootloader unlocked and last day i flashed an img kernel of cyanogenmod with flashify...all worked good until reboot...when i pressed reboot my phone didn't started anymore.when i try to power up nothing happens no leds no fastboot nothing!what can i do to fix it????please help
Click to expand...
Click to collapse
Ooops.
Leave the phone off, connect it in fastboot mode (I know you said it did not work, but that might just be the LED, please try it again) and then run this
Code:
fastboot devices
and tell me what it says
Xperia v brick
gregbradley said:
Ooops.
Leave the phone off, connect it in fastboot mode (I know you said it did not work, but that might just be the LED, please try it again) and then run this
Code:
fastboot devices
and tell me what it says
Click to expand...
Click to collapse
no the phone doesnt connect in fastboot mode it shows no led nothing i only see in device manager that there is a
QHSUSB_DLOAD device wich i think is the processor...so what can i do man?and in device manager i see connected qualcomm hs-usb qdloader 9008 (com8)
did you try what I said?
hello greg, hows the z1, hope you enjoy it
thanks for your many many support to all questions here, hope it wasnt that frustrated when people not tried out what you suggested :silly:
to sash89: you unlocked bootloader, and flashed an cm img kernel? that let me comes to another question. you flashed that kernel above a stock rom, or you flashed CM ROM also?
Hi
The Z1 is great, I recommend it.
Yes, it does help if people try things you suggest.
brick
gregbradley said:
did you try what I said?
Click to expand...
Click to collapse
but where i must enter that code?in cmd?or where?
yes, open up a command window where you have adb and fastboot installed on your PC.
If you do not have them installed then download and install this
minimal_adb_fastboot_v1.1.3_setup.exe - 2.12 MB
brick
gregbradley said:
yes, open up a command window where you have adb and fastboot installed on your PC.
If you do not have them installed then download and install this
minimal_adb_fastboot_v1.1.3_setup.exe - 2.12 MB
Click to expand...
Click to collapse
nothing hapened man...it may be a hard brick???if yes what can i do?
sash89 said:
nothing hapened man...it may be a hard brick???if yes what can i do?
Click to expand...
Click to collapse
By definition a hard brick is not recoverable.
OK, try this.
Code:
adb devices
and tell me what that says.
Also, download and install flashtool from the first thread in the dev section. Open the driver folder from the installation path and run drivers.exe. Choose flashmode, fastboot and TX drivers.
Then run flashtool and attach the phone, disconnect and try attaching in flashmode, disconnect and try to attach in fastboot. Then copy and paste the output from flashtool here.
One final thing, try to attach again in flashmode but this time do this.
Press and hold volume up, attach USB cable, keep pressing volume up and now press the power button. Hold both buttons for 10 seconds or until the green LED comes on. Tell me what happens.
brick
gregbradley said:
By definition a hard brick is not recoverable.
OK, try this.
Code:
adb devices
and tell me what that says.
Also, download and install flashtool from the first thread in the dev section. Open the driver folder from the installation path and run drivers.exe. Choose flashmode, fastboot and TX drivers.
Then run flashtool and attach the phone, disconnect and try attaching in flashmode, disconnect and try to attach in fastboot. Then copy and paste the output from flashtool here.
One final thing, try to attach again in flashmode but this time do this.
Press and hold volume up, attach USB cable, keep pressing volume up and now press the power button. Hold both buttons for 10 seconds or until the green LED comes on. Tell me what happens.
Click to expand...
Click to collapse
nothing happens man...no leds showing up no connection to pc...only this is showing up on device manager when i connect phone to pc qualcomm hs-usb qdloader 9008 com8
This is not looking good for you.
Try this link
or this google search
but I have not heard of good things with phones that want that driver. Best of luck and hopefully someone can come up with a solution
sash89 said:
Hey people!i need help here!i have an xperia v with bootloader unlocked and last day i flashed an img kernel of cyanogenmod with flashify...all worked good until reboot...when i pressed reboot my phone didn't started anymore.when i try to power up nothing happens no leds no fastboot nothing!what can i do to fix it????please help
Click to expand...
Click to collapse
Try SUS bro..
http://forum.xda-developers.com/showthread.php?p=45965388
Sent from my C6602 using xda premium
YudiA1 said:
Try SUS bro..
http://forum.xda-developers.com/showthread.php?p=45965388
Sent from my C6602 using xda premium
Click to expand...
Click to collapse
He cannot connect in flashmode, so that wont work, he will have to solve the connection problem before repairing the OS
brick
gregbradley said:
He cannot connect in flashmode, so that wont work, he will have to solve the connection problem before repairing the OS
Click to expand...
Click to collapse
so may i send it to warranty?what are your suggestions guys?
sash89 said:
so may i send it to warranty?what are your suggestions guys?
Click to expand...
Click to collapse
Your warrenty is void because you unlocked the bootloader.
oh one more thought from me. you sure your battery wasnt gone empty while you did flashing stuff?
happened to me one time, restored backup and battery gone empty while in the process. it looked dead too for some time, but wasnt.
brick
immerblind said:
oh one more thought from me. you sure your battery wasnt gone empty while you did flashing stuff?
happened to me one time, restored backup and battery gone empty while in the process. it looked dead too for some time, but wasnt.
Click to expand...
Click to collapse
and what is this meaning man?my battery was something like 18 percent when i flashed...so may the battery be broken?anyway when i put the phone into charge without battery red led flashes for one time...what this means?
when you put charger in, is it loading the battery the usual way like it did before you broke your handy?
also you not answered one of my previous posts, you flashed the CM kernel without flashing any CM rom. you on stock sony rom or on cm when mistake happens?
immerblind said:
when you put charger in, is it loading the battery the usual way like it did before you broke your handy?
also you not answered one of my previous posts, you flashed the CM kernel without flashing any CM rom. you on stock sony rom or on cm when mistake happens?[/QUOTEi was on stock rom man
Click to expand...
Click to collapse
So I was going through the rooting process for the second time on my ATT Moto X and while in bootloader flashing 4.2.2 something went wrong and it wasn't fully flashed. There was no error, it just said "Done" on bootloader. So I restarted the phone and ever since then the phone has had a black screen, although when I plug it into my computer it recognizes it. With that said, I've tried to use RSD Lite but it just fails to put it into fastboot mode, and it does not come up under either fastboot devices or adb devices.
Not sure what else I could do from here. Holding the power button and volume down button to get into bootloader doesn't work either. Does anyone here have any ideas?
TsterT said:
So I was going through the rooting process for the second time on my ATT Moto X and while in bootloader flashing 4.2.2 something went wrong and it wasn't fully flashed. There was no error, it just said "Done" on bootloader. So I restarted the phone and ever since then the phone has had a black screen, although when I plug it into my computer it recognizes it. With that said, I've tried to use RSD Lite but it just fails to put it into fastboot mode, and it does not come up under either fastboot devices or adb devices.
Not sure what else I could do from here. Holding the power button and volume down button to get into bootloader doesn't work either. Does anyone here have any ideas?
Click to expand...
Click to collapse
Can you clarify a few things?
First, have you been on 4.2.2 this entire time, or were you attempting to 'downgrade'?
Next, when you "turn on" the device, you say it has a black screen...does it light up at all, or vibrate?
And third, when you say the device is 'recognized' by the PC, how is it recognized? When you go to Device Manager, do you see a listing for "qhsusb_bulk"? If not, what is the device listed as?
Sorry I didn't specify those things in the original post, but I appreciate you taking the time to respond.
I was originally on 4.4 and was in the process of downgrading to 4.2.2 post-camera.
The phone does not light up or vibrate or anything, but I can hear it connect on my computer. Not that this is the computer making the sound, not the phone.
And third, my phone comes up as a listing on RSD Lite v6.5.1. It does not provide any information, it just says it is connected. My device is listed as "Qualcomm HS-USB QDLoader 9008 (COM4)"
TsterT said:
Sorry I didn't specify those things in the original post, but I appreciate you taking the time to respond.
I was originally on 4.4 and was in the process of downgrading to 4.2.2 post-camera.
The phone does not light up or vibrate or anything, but I can hear it connect on my computer. Not that this is the computer making the sound, not the phone.
And third, my phone comes up as a listing on RSD Lite v6.5.1. It does not provide any information, it just says it is connected. My device is listed as "Qualcomm HS-USB QDLoader 9008 (COM4)"
Click to expand...
Click to collapse
OK, I understand. There may be hope for you but it will require patience and exacting precision. Don't get your hopes up TOO much, but I will attempt to help you.
Normally, it is NOT possible to downgrade, but (thankfully) 4.4 > 4.2.2 Post-Camera is the one exception.
First, I realize that RSD Lite shows "Qualcomm HS-USB QDLoader 9008 (COM4)", but I need you to open Device Manager and tell me what it says in there. If you aren't familiar with how to get there, simply press the start button, and type 'device manager' (without quotes, of course). It should show up under "Control Panel", assuming you are on Windows 7.
Also, tell me for sure which version of Windows your PC is running.
Then we can proceed further.
"Qualcomm HS-USB QDLoader 9008 (COM4)" is from Device Manager. RSDLite simply lists the model as "QHSUB_DLOAD"
I am running Windows 8.1 64bit
TsterT said:
"Qualcomm HS-USB QDLoader 9008 (COM4)" is from Device Manager. RSDLite simply lists the model as "QHSUB_DLOAD"
I am running Windows 8.1 64bit
Click to expand...
Click to collapse
Ah, OK. This is good news.... "QHUSB_DLOAD"
Basically, you have somehow corrupted your bootloader.
Please reference this thread: http://forum.xda-developers.com/showpost.php?p=49876179&postcount=1
If you follow the instructions exactly, we should be able to force your phone into fastboot mode. From there, we can manually flash back to 4.4
Remember, there are no guarantees with this, and I don't even know if it has been attempted or is possible in Windows 8. So if you aren't successful, get your hands on a Windows 7 PC, and try again.
If you get stuck, post back here and I will attempt to help.
Sweet man, I really appreciate your help. I'll try all of that and report back here when done. Thank you again.
TsterT said:
Sweet man, I really appreciate your help. I'll try all of that and report back here when done. Thank you again.
Click to expand...
Click to collapse
One last comment: Do NOT use a USB 3.0 port for this. Only use a USB 2.0 port. Good Luck, and let us know how it works out....
Hell ya, it worked like a charm. Back into bootloader. Thank you again for helping me so quickly. You're awesome.
TsterT said:
Hell ya, it worked like a charm. Back into bootloader. Thank you again for helping me so quickly. You're awesome.
Click to expand...
Click to collapse
Welcome!!! Glad it went so smoothly for you. Remember to give 'thanks' to the OP of the De-Bricking thread I linked you to.
:good:
Help please
Help please
hi Bro
I followed ur step bcz my phone got stuck on the 4th step
http://forum.xda-developers.com/moto...t1060-t3118342
when i did the 4th step it got lack for around 30 min and nothing happens i quit the application and the phone is still in black screen
i have attached images with error what i get
i have moto xt1060
Hi. Ive had some bad luck this weekend, firstly i had a rooted xperia sp that i rooted with the app it all worked fine for a long time. Then this last week i decided to flash a rom for the first time on this device (have done many times on my old xperia x10) everyting went well but i had really bad cellphone reception with this rom (http://forum.xda-developers.com/xperia-sp/development/xperiasp-locked-bootloader-lbl-t2947194) so i tought why not flash another rom?
Thats what i set up myself to do, i found this rom (http://forum.xda-developers.com/xpe...rom-6-0-1-cyanogenmod-13-0-xperia-sp-t3347677) and it seemd well done and all but it required a unlocked bootloader so i decide why not just flash a kernel with it unlocked already... so i found this thread (http://forum.xda-developers.com/showthread.php?t=2345567) and did the recovery method.
After this the cellphone wouldnt boot anymore (boot loop) so i tried to find a solution, the solution i found was to flash a whole new firmware so it would work fine, so thats what i tried i downloaded a image with flashtool (xperifirm)
the customized br 1271-6480 at this point i could still put the phone on fastboot and flashmode, so i started to flash that new firmware, the problem came when the cellphone disconnected (probably becouse of the boot loop) so now i have a brick.
Ive tried alot of things multiple versions of s1tools none of them "support" my device also downloaded QPST downloader the really old one version 2.7 it does detect my device when im on this "mode" with the driver "Qualcomm HS-USB QDLoader 9008" i can change back to the "ZEUS flash device" easily for s1tools but after all these hours of tests ive ran out of options... ive even opened the device 2 times the second time ive seem that when i remove the battery cable it flashes the red led once and then turns off.
any other tests i can do or just send it to someone to fix and they will ask for half of the phone price for it?
ps ive also tried to the rubber band method for about 12 hours no luck
Follow this guide to repair your phone using Xperia companion:
https://talk.sonymobile.com/t5/FAQ/How-to-perform-a-software-repair-with-PC-Companion/m-p/1061294
Sent from my Xperia SP using Tapatalk
OsGhaly said:
Follow this guide to repair your phone using Xperia companion:
Sent from my Xperia SP using Tapatalk
Click to expand...
Click to collapse
i get stuck step 11 since i cant turn on the cellphone with flashmode otherwise i would fix it with flashtool right?
i would post a image but i cant becouse i dont have 10 posts...
warlockxx said:
i get stuck step 11 since i cant turn on the cellphone with flashmode otherwise i would fix it with flashtool right?
i would post a image but i cant becouse i dont have 10 posts...
Click to expand...
Click to collapse
For step 10, make sure that you've turned off the phone completely by pressing this tiny button in the back till it vibrates 3 times then connect the phone while holding the volume down key to enter flash mode and continue flashing.
I also recommend using this official way to repair your phone using Xperia companion to avoid hard brick, as our old XSP already has problems with the new versions of flashtool
Sent from my Xperia SP using Tapatalk
OsGhaly said:
For step 10, make sure that you've turned off the phone completely by pressing this tiny button in the back till it vibrates 3 times then connect the phone while holding the volume down key to enter flash mode and continue flashing.
I also recommend using this official way to repair your phone using Xperia companion to avoid hard brick, as our old XSP already has problems with the new versions of flashtool
Sent from my Xperia SP using Tapatalk
Click to expand...
Click to collapse
my phone turns off if i press the reset button on the back i know that becouse i can see the " Qualcomm HS-USB QDloader 9008" but it does not vibrate since i have tried to keep that button down for 5 minutes and nothing happened, also when i try to turn on again with vol down + power it starts again as " Qualcomm HS-USB QDloader 9008"
warlockxx said:
my phone turns off if i press the reset button on the back i know that becouse i can see the " Qualcomm HS-USB QDloader 9008" but it does not vibrate since i have tried to keep that button down for 5 minutes and nothing happened, also when i try to turn on again with vol down + power it starts again as " Qualcomm HS-USB QDloader 9008"
Click to expand...
Click to collapse
Only QPST software download or eMMC software download can repair this phone
Click to expand...
Click to collapse
Just Google it, Sorry dear I wish I could be more help but I really don't know how to do this.
Sent from my Xperia SP using Tapatalk
OsGhaly said:
Just Google it, Sorry dear I wish I could be more help but I really don't know how to do this.
Sent from my Xperia SP using Tapatalk
Click to expand...
Click to collapse
ye idk... i have qpst and qfil installed on my pc but i cant make it work since on qpst i dont have the right .hex file and on qfil i dont have the xml file it needs... im kinda of stuck now.