<SOLVED> Upgrade android on a GT-P1000L - Galaxy Tab Q&A, Help & Troubleshooting

Hello,
Need to upgrade an old tablet to whatever newer version I can. Currently it has:
Model: GT-P1000L
Android version: 2.2
Kernel: 2.6.32.9 [email protected] #1
I found a few links to do the ROM to Lollipop and/or KitKat, however, I am having issues with the tablet being recognize by Windows 8.1.
Drivers are not working, but even when I plug it in, I never even get an "unknown device" in device manager. Odin will not see it as well when in download mode and I have the original USB cable.
Added: I just tried a Win7 VM and no luck as well. Tablet not recognize at all, it does not show in "device manager" with or without drivers.
Any ideas anyone?

bump

Try uninstalling and reinstalling the drivers or else install samsung keys....or try another cable.
You also have to be in the download mode(volume down+power key) to use odin.
If all this does not work then try on some other system

Thanks! I tried uninstalling/reinstalling drivers multiple times, different versions, etc. Tried a Win7 VM on a MAC + machines with Win 8.1 and 10. None worked. Also tried different Odin versions, same result. And yes, all in download mode.
Yesterday after some research, I am leaning towards a bad cable. It seems some cables are good for charging (in this case it will charge) but not for data transfer.
Will keep you posted.

After dealing with a bad cable, I was finally able to install CWM as in this guide. However, as soon as I installed OMNI 4.4.4., it booted on TWRP 2.8.1. The touch is not working on screen nor the buttons while on TWRP. Cannot do anything.
- ADB shows the device in recovery
Can something be done? I was following this guide: http://forum.xda-developers.com/galaxy-tab/general/how-to-install-android-cm12-lollipop-5-t3018841

SOLUTION:
This sure was a learning lesson. For some reason, anytime I flashed "CF-Root-TAB7_XX_OXA_JQ1-v3.3-CWM3RFS.tar" I lost the touch screen in Android and in CWM. So when flashing Omni 4.4.4, could not do anything in TWRP. After lots of reading and some trial/errors, this worked...
- Re-stock using firmware from http://www.sammobile.com/firmwares/
- From stock 2.3.6, I flashed CF-Root-TAB7_XX_OXA_JQ1-v3.3-CWM3RFS.tar with Odin
- Lost touch in screen
- Boot to recovery and in CWM, using volume and power buttons, I installed zip ROM called "HumberOS-v2.1"
- Boot to recovery, Got TOUCH back! Do all wipes.
- From CWM, installed Omni 4.4.4, which gave me TWRP (with touch screen working!) and the ability to install any 5.x or 6.x ROMs as specified here http://forum.xda-developers.com/galaxy-tab/general/how-to-install-android-cm12-lollipop-5-t3018841.
Tablet has a new life!

shabuboy said:
Tablet has a new life!
Click to expand...
Click to collapse
Hi! First of all my greetings to you!
I want to update my GT-P1000 too, but on starts has same issue: "unknown device".
Can you please give more detailed information about the difference between charging and data cable. I'll try to find correct cable on local shops.
Best regards.

dimiork said:
Hi! First of all my greetings to you!
I want to update my GT-P1000 too, but on starts has same issue: "unknown device".
Can you please give more detailed information about the difference between charging and data cable. I'll try to find correct cable on local shops.
Best regards.
Click to expand...
Click to collapse
HI, I had the same issue. maybe should try first to make sure you have the right drivers. look for samsung driver for mobile devices and try on different usb ports. I have 3.0 usb and 2.0 usb on my laptop and when I connect my tablet to the 3.0 ones it doent work! so I started using the 2.0 and went smooth

Yes, make sure the correct drivers are there and also try different ports and different PCs if you can. Your issue is a bit different to mine, as it was never shown as "unknown device" for me.
Just FYI... It took me a couple of days to finally research and find out there are different cables, some for charging only and some for charging and data transfer. In my case since I had the charge only cable, PCs never detected the tablet. New cable first try it was detected by Odin.

So, when you say your tablet has new life, how good are we talking? I flashed mine with Cyanogenmod 9.something a while back, and it's near to unusable. Would like to bring it back to life...

we all have different meaning for unusable. For me, the fact that it can have code 5.x or newer is a life saver.

shabuboy said:
we all have different meaning for unusable. For me, the fact that it can have code 5.x or newer is a life saver.
Click to expand...
Click to collapse
It's just incredibly slow, to the point I've hardly used it.

Related

[Q] i9000 USB connection not working at all

I have an annoying problem, when I connect i9000 to PC using USB cable, only phone charging happens, other that that, nothing happens, the i9000 is not aware of USB connection and so the PC.
I've tried this on 3 PC, 2 with windows 7 64-bit, and the other with XP SP3.
I tried installing kies, samsung usb drivers, even somene in another forum gave me an update file to apply it through the recovery mode but, with no sccess.
Also tried what others said about unmounting SD card,.....connecting in debug mode,.........
All no sccess
maskr said:
I have an annoying problem, when I connect i9000 to PC using USB cable, only phone charging happens, other that that, nothing happens, the i9000 is not aware of USB connection and so the PC.
I've tried this on 3 PC, 2 with windows 7 64-bit, and the other with XP SP3.
I tried installing kies, samsung usb drivers, even somene in another forum gave me an update file to apply it through the recovery mode but, with no sccess.
Also tried what others said about unmounting SD card,.....connecting in debug mode,.........
All no sccess
Click to expand...
Click to collapse
Is the cable ok? (even if it charge), or maybe a pin damaged on your phone?
ttf said:
Is the cable ok? (even if it charge), or maybe a pin damaged on your phone?
Click to expand...
Click to collapse
Yes I used another cable, but no success
Do you have a custom launcher installed on your i9000? I have found (experience) that KIES will not fire if you are not using the stock launcher (TWLAUNCHER). Once I switch from LauncherEX to TWLauncher, KIES will fire and I can use it, the USB Mass Storage, etc....
can3gxw said:
Do you have a custom launcher installed on your i9000? I have found (experience) that KIES will not fire if you are not using the stock launcher (TWLAUNCHER). Once I switch from LauncherEX to TWLauncher, KIES will fire and I can use it, the USB Mass Storage, etc....
Click to expand...
Click to collapse
Thanks for your answer.
I tried this also, but didn't work for me.
BUT the issue was solved. Don't know the exact mechanism, but here's what I did.
As android is a little brother of linux, I told myself why don't you give Ubuntu a trial. So, I downloaded and installed it, then after booting in Ubuntu, I connected the phone, 1st no success but then enabled debug mode and the phone & computer identified each other
Excellent, but no ODIN or KIES for Ubuntu , little depressed, booted into Windows 7 and BINGO, the issue resolved completely.
Maybe the big brother Ubuntu, gave his little bra a push
Try cleaning port on phone
Hi, I went through similar - only ubuntu didn't work either.... I eventually read in a linux forum though about cleaning the usb port on the phone with alcohol. As was at home then and tried on windows again and BOOM! drivers like crazy...
Might try that too. My phone was only 3 months old and never really abused but it worked so what do I know.
Ubuntu or alcohol, I'm happy now that my issue was solved
Ubuntu or Alcohol
maskr said:
Ubuntu or alcohol, I'm happy now that my issue was solved
Click to expand...
Click to collapse
Or both in moderation if its going really bad.
i have the same problem.. i don't know how to work with ubuntu.. and alcohol didn't work..
Help..!
thommy86 said:
i have the same problem.. i don't know how to work with ubuntu.. and alcohol didn't work..
Help..!
Click to expand...
Click to collapse
You don't have to know much about ubuntu, just download it, then install it as any windows program, boot into ubuntu.
After that connect your phone to the computer, and make sure to activate debuging mode on i9000. You may need to disconnect and reconnect the cable before it works.
I also find that my PC will only recognize my phone if I reboot the i9000 right before connecting it.
Quirky, but livable.
Actually this issue is strange, and when I emailed Samsung about this problem, they asked me to install KIES
Yes My phone to only charging when connect cable nothing else happen please any help
Try This for your rooted phone
http://db.tt/xUlV2qo
it works on froyo only ...
Try it works for me
Step :
1. Download that file
2. Move that file to your /sdcard
3. Flash that zip on Cwm recovery
Sir my phone is not rooted and how to root without usb its not working
iamnajam said:
Sir my phone is not rooted and how to root without usb its not working
Click to expand...
Click to collapse
Try to root first ...maybe with .apk like z4root or other.. i have no clue ...
if you succes root your phone and then instal CWM with rom manager..
Then Flash that file
z4root is not working and oneclickroot need usb connection i cant root my phone by zroot plz tell any other way
maskr said:
Thanks for your answer.
I tried this also, but didn't work for me.
BUT the issue was solved. Don't know the exact mechanism, but here's what I did.
As android is a little brother of linux, I told myself why don't you give Ubuntu a trial. So, I downloaded and installed it, then after booting in Ubuntu, I connected the phone, 1st no success but then enabled debug mode and the phone & computer identified each other
Excellent, but no ODIN or KIES for Ubuntu , little depressed, booted into Windows 7 and BINGO, the issue resolved completely.
Maybe the big brother Ubuntu, gave his little bra a push
Click to expand...
Click to collapse
Try that, it worked for me
i have the same problem and found out that my phone has to be on idle mode... how do i put my phone in idle mode? it says to close all applications and i did but still nothing... and none of the above solutions worked for me.
my phone info is this:
Firmware version: 2.1-update1
Baseband version: I9000TUBJH1
Kernel version: 2.6.29 / [email protected] #2
Build number: ECLAIR.UBJI1
And to top it all my phone will not boot into download mode.
Guys,
I am having the same issue. This started when I upgraded my P from Win XP to Win 7. I tried the alcohol thing. I tried Ubuntu which could not recognize the phone, whatever mode (USB debug or not, media, kies or mass storage). Of course, I had tried before that to install the lastest USB drivers. I also tried Kies.
Nothing worked. Any further help ?
THanks

[Q] Zero connectivity in download mode. £10 for solution. :)

Okay a little backstory:
I was on an early version of CM9 but as i am selling the phone i decided to put a more stable version of it on there and downloaded CM7 -stable.
I flashed this in CWM and it worked fine.
I gave it a quick test and noticed all the google apps were missing, most importantly the market. So i booted into recovery and realised i had forgotten to put the zip on the SD card.
I then went into mounts and mounted USB, nothing happened...
From that point onwards the phone would not talk to the PC. even if i booted up into the phone, it would just show it as charging. I could not find any options in the menus for USB options.
After some extensive reading, i tried a few things, none of them had worked. I found a post mentioning some kernels have issues with USB, so i downloaded the recommended one and flashed it in CWM.
After rebooting, CWM was now orange and not blue and the option to flash from external card has gone.
I have also done some digging and there is a good posibility that the kernal that i flashed was for the GT I9000 (which is the american one, right?)
So as it is at the moment:-
I can get into CWM.
I can get into download mode through the 3 button combo.
I can get into download mode using home made jig.
I can boot the phone, but it boot loops.
I can not get the phone to be detected on the pc.
Things i have checked:
Cable will connect other phones.
Tried different cable to be sure.
Phone used to be detected, but downloaded drivers through kies again to be sure.
Closed Kies using task manager.
Nothing is coming up in network connections in device manager when phone is connected.
I'm out of ideas now, so £10 PayPal donation for anyone that comes up with the solution to fix it
If i can get it detected, i can use Odin to flash what i want.
Sounds like a drivers problem. You may need the 'Google driver' developer.android.com/sdk/win-usb.html
When I had bootloops when I first installed CM9 I used heimdall to flash a the stock CM9 kernel. This gave me back CWM.
heimdall flash --kernel 'kernel.zip'
In the commandline.
Thanks for that,
I already had the Google USB drivers from when i installed the SDK to make some apps.
So i then gave Heimdall a try (Graphical Version), it seemed to suffer the same problem.
Reporting "Failed to detect compatible download-mode device."
I seem to remember the GUI saying I didn't have the correct drivers and it downloaded them for me.
The other thing worth a try is changing the USB port and reinstalling the correct drivers on that port.
I've not seen anything like that, it has not asked me for any drivers.
It's like the phone is not connected at all. nothing will detect it, i have even tried it on another PC.
Sorry, I'm not sure what you mean by installing on a port.
Well sometimes changing USB port will allow you to install new drivers. Although if you've tried it in another computer and it doesn't work then changing port may not help.
Does the phone appear in device manager when it's connected and in download mode?
Nope. Not coming up at all in the device manager. It didn't when it was booting fine. And it still doesn't in download mode. :-( I'm thinking the usb connector on the phone might be faulty.
But it was working up until trying to mount the USB in CWM
Sent from my GT-N7000 using XDA App
I don't suppose you have access to a Linux PC do you? Windows USB drivers are notoriously sucky. If you could plug it into a Linux PC and type 'lsusb' at a command line, that would at least show you that the device is really there.
I think I have a spare pc kicking around that I could use. I'll give it a go when I get home tonight.
Sent from my GT-N7000 using XDA App
Remove all the drivers completely from device manager for Samsung, then install fresh drivers and connect the cable when in download mode, hopefully it will recognize it
Are you sure the connector is clean? e.g. maybe there's dust in it.
I had that problem once, the connector was full of fabric fibers from some coat's pocket I had the phone in.
Suggestion 1 (Linux): I installed ubuntu, did not detected anything to even install any drivers. Detected my new phone fine.
Suggestion 2 (Uninstall drivers from device manager): I could not find any drivers named with the name Samsung in there.
Suggestion 3 (Clean port): I have some compressed air that i sprayed inside, it does look pretty clean and will continue to charge but still not connection on the pc.
To install the drivers for heimdall you have to run zdiag from inside the driver folder. Had to do this earlier on, the phone the other appeared as something other than Samsung composite usb or whatever it normally says
I tried this, and it displayed 9 devices after selecting show all. I seemed to recognise all of the items in the menu.
To be sure, I then disconnected the phone and re ran it to see if one of the items were missing, but it was the same number.
I too had problem with the usb connection on my i9000, and I was pretty sure my usb connector on the phone is somewhat damaged since it sometimes can only go to charging mode without being detected by my pc as a usb device. CWM instal is fine but ODIN can only detect the phone without able to flash the rom to the phone. The flashing will always stuck at the message "Setting Up Connection", I waited for 15 minutes and the flashing will eventually died. I retry the odin flash for 40 to 50 times and eventually the flashing will go through one time. Tried heidmall command line and the result is the same.
I have problem with Odin in the past. I bought a new laptop, running Win7 64 bit. Installed Samsung Kies to install the correct USB drivers for the phone. Then made sure that Kies wasn't running in the background. So tried using Odin. Odin was detecting the phone, but it was hanging at initialising connection. Odin was working fine on my old laptop running Win7 32bit. Long story short, I was having a few issues with my new laptop, reinstalled Win7 64bit, now Odin is working fine, have flashed the phone a few times using the new computer.
After flashing which kernel you started facing this problem?
Wipe ur phone,re-flash CM7(flash the nightly 181,it's completely stable),uninstall KIES,uninstall old usb drivers,install these usb drivers http://forum.xda-developers.com/showthread.php?t=961956 ,check that USB storage mode is set as Mass Storage and then connect your phone. Also try enabling/disabling USB debugging
lovedonator said:
After flashing which kernel you started facing this problem?
Wipe ur phone,re-flash CM7(flash the nightly 181,it's completely stable),uninstall KIES,uninstall old usb drivers,install these usb drivers http://forum.xda-developers.com/showthread.php?t=961956 ,check that USB storage mode is set as Mass Storage and then connect your phone. Also try enabling/disabling USB debugging
Click to expand...
Click to collapse
The point at which i could no longer mount the USB was when i selected "mount usb" from CWM. I later installed a new kernal which downgraded my CWM, removing the install from external SD option.
So I cant flash a re-flash a rom unless i can it onto the phone which without the USB working is near impossible.
Xyis said:
The point at which i could no longer mount the USB was when i selected "mount usb" from CWM. I later installed a new kernal which downgraded my CWM, removing the install from external SD option.
So I cant flash a re-flash a rom unless i can it onto the phone which without the USB working is near impossible.
Click to expand...
Click to collapse
You can directly download the ROM on your internal sd using dolphin browser or opera mobile
I can't do that either as the phone is currently boot looping.
Sent from my GT-N7000 using XDA App

Galaxy TAB P1000 NOT Detecting in ODIN

Hello xda users,
I need HELP !
I have a galaxy tab P1000
currently froyo 2.2
wanted to upgrade to GB
Tried the Odin way from another link on this site (MANUAL updation for galaxy tab(p1000) into 2.3.3 gingerbread ), it failed and the Tab got soft bricked,
somehow managed to unbrick it, now its back to its original fw, but it keeps restarting in a loop until i switchd the damn thing off completely
I have tried to go in download mode to flash but odin doesnt recognise it , tried differnt computers too, no use.
I have gone in recovery mode, hard reset, wipe cache , still when i switch it on, it goes in a reboot loop.
tried to use heimdall. cant get sucess as i might not understand how to use it properly
Please help.
Sincere thanks to you if you can help me get my tab up and running., if not in GB atleast back in froyo.
(PS- i im not worried about my data , and i have not backed up the rom etc before doing any of these)
Try to reinstall or install a usb driver from samsung
tried that before , didnt work
anyway now i managed to get it detected on ODIN and flashed it to GB
Libon
Yeah, happened to me too, nearly had a sh*t my pants when Odin didn't recognise my Tab.
I would recommend -
charge the Tab fully using wall adapter (4 hrs+)
plug it in with Odin open and using USB cable
don't expect Odin to recognise the Tab immediately
check back after 5 mins or so (I don't know, does Odin refresh?)
I was able to restore my Tab from the PC - ! - Marvin screen.
I don't want to go back there again though!
yea dude.. same here
i kept it on charge for a couple of hours and then tried.. bam it conencts..
Libon
Tab not turning on
HI Guys I have Galaxy 1000 .I was updating it by using kies in between the process my computer shut down and when I am trying to connect my tab again its not turning on .can some one help me please ?
Waiting no charge baterry 2 3 j
Run odin
Connect tab . Wait Long time 20 30min
Tab is. Détect go flashing
Sorry for my english
I m.. French
Envoyé depuis mon GT-P1000
GT P1000 Odin wont detect
hi guys can you help me on my GT P1000 odin wont detect it even after 2-3hrs. tried everything but odin wont detect my device.
thanks in advance...
iamkakers said:
hi guys can you help me on my GT P1000 odin wont detect it even after 2-3hrs. tried everything but odin wont detect my device.
thanks in advance...
Click to expand...
Click to collapse
do u have samsung kies installed in your pc? if does, kill the kies process (Ctrl+Alt+Del). close, and open odin3, put your tab into download mode, and then plug it into usb port. try to change different ports.
i always had this problems.. if all if that didn't work, i'll format my pc
Sent from my GT-P1000
odin3
hi
i also have a gt p1000 and odin3 doesnt detect the tab. i've been trying to root my tab for a while, tried odin and it doesnt detect, tried doomlord and it doesnt even get past the first step. i tried uninstalling kies on my windows 8 laptop and still no luck im not too sure what to do. is there something that i might be doing wrong because i follow all the info thati get from here.
is there another rooting app i can try that doesnt brick my device? and or is there an app that i can get that i am able to use a ps3 controller on my device that does not require a rooted device. please help
thanks
My Galaxy tab also doesn't connect to usb after cache wiped humber os flash
Thanks in advance guys!..
Earlier I was using Cyanogen mode 10 Custom ROM but has few issues like recognize SD card.
later I flashed to Humber OS caused real problem.
It was clock work recovery installed but my tab tab boots stays on screen humber OS.
It goes to recovery mode, and also to some unknown recovery mode.
Either the way not recognized by computer. I tried all options like heimtal an Odin. No help.
Friends any help, would be highly appreciated.
BUMP
Any solution to this given the fact that usb drivers have been installed?
Are you sure it is recognised by the computer before trying Odin or Heimdall?
I seen this in a post:
#################################################################################
4 Reasons Why Odin is Not Detecting Your Android Device:
Reason 1: No drivers installed for your phone
Most of the time Odin is not able to detect your phone, simply because you haven’t installed the drivers for your phone. Normally windows would automatically download the respective drivers for your phone from the internet and install it. But in case it isn’t able to do so, you need to download the drivers from your phone manufacturer’s website.
Reason 2: Inferior quality or damaged USB cable
Odin is very sensitive to low quality or damaged USB cables, which is a major reason why odin will detect your android phone in file transfer mode but fail to detect it in download mode. You might have a genuine USB cable that came with your Android phone but with time its quality will depreciate, which is why you might have to get a new USB cable.
Reason 3: Odin is corrupted
This happened once with a reader on my blog, we tried everything to solve his problem, but in the end using a different version of Odin worked out for him.
Reason 4: USB port is defective
Defective USB ports can also be a reason for Odin not detecting your Android phone. This was a problem faced by one of my readers and plugging the USB cable in another USB port worked out for him.
#######################################################################
and I need install cwm recovery on a twrp recovery and just do that with this app:
ROM Manager
if you want do same job; you can download it from google play easily!
and install recovery,rom or restore backup with it.
farza(db)astany said:
I seen this in a post:
#################################################################################
4 Reasons Why Odin is Not Detecting Your Android Device:
Reason 1: No drivers installed for your phone
Most of the time Odin is not able to detect your phone, simply because you haven’t installed the drivers for your phone. Normally windows would automatically download the respective drivers for your phone from the internet and install it. But in case it isn’t able to do so, you need to download the drivers from your phone manufacturer’s website.
Reason 2: Inferior quality or damaged USB cable
Odin is very sensitive to low quality or damaged USB cables, which is a major reason why odin will detect your android phone in file transfer mode but fail to detect it in download mode. You might have a genuine USB cable that came with your Android phone but with time its quality will depreciate, which is why you might have to get a new USB cable.
Reason 3: Odin is corrupted
This happened once with a reader on my blog, we tried everything to solve his problem, but in the end using a different version of Odin worked out for him.
Reason 4: USB port is defective
Defective USB ports can also be a reason for Odin not detecting your Android phone. This was a problem faced by one of my readers and plugging the USB cable in another USB port worked out for him.
#######################################################################
and I need install cwm recovery on a twrp recovery and just do that with this app:
ROM Manager
if you want do same job; you can download it from google play easily!
and install recovery,rom or restore backup with it.
Click to expand...
Click to collapse
reason 1: my phone is samsung and it's detected by ODIN, kies and I transfer files from and to my computer without problems. also tried reinstalling just in case but nothing, so I guess this is not the answer for my problem
reason 2: tried with original cable, but as I didn't use the tablet for a long time I also thought it could be the cable, so I asked a friend of mine if he could lend me one cable, but that didn't work. pity. :/
reason 3: tried 3 different versions of ODIN, and in every version my phone (mentioned above) is detected. shame. :S
reason 4: tried the 3 different USB ports in my laptop. two 2.0 USB ports and one 3.0 USB port, so again I doubt this is the reason of my problem.
extra reason: ~~~ maybe it's the OS version ~~~ // this laptop came with windows 8 preinstalled. nothing. then, I updated to win 8.1. again nothing. now I'm running windows 10 and the same, nothing is detected neither by ODIN nor the computer. also tried in 4 different computers running win xp, win 7 and other with win 8.1.
btw, thank you anyway for your apportation; this may help other people, but unfortunately, it's not my case, so can anybody else join me to think about a new reason and a way to solve it? thank you very much :good: :highfive: :fingers-crossed:
~~~~~~~~~~~~ EDIT ~~~~~~~~~~~~
I have continued researching and found a software. it didn't work for me, but maybe it works for other people.
-first, you have to make sure you have java installed on your computer.
-second, extract the oneclick.rar file on an easy-access directory.
-third, put your tab on download mode (while charging icon when tab is turned off, press power + volume down until a yellow triangle appears).
-fourth, click start unsoft-brick and let the magic begin! 8)
note: if a warning error pops up, trust the software and click on resolution center and follow the instructions of one of the three "alternative ways".
download: https://www.dropbox.com/s/8ix6yygu23a1kjn/OneClick.rar?dl=0
good luck!!
help
blizzard_boy said:
tried that before , didnt work
anyway now i managed to get it detected on ODIN and flashed it to GB
Libon
Click to expand...
Click to collapse
hi can you plz help me out with the processess you followed to as im suffring the same problum only CWM working and even it shows sd card mount error also not installing any rom via SD card showing error and odin not detecting it nothing happening only CWM and blank screen
blizzard_boy said:
tried that before , didnt work
anyway now i managed to get it detected on ODIN and flashed it to GB
Libon
Click to expand...
Click to collapse
How did you did it im having the same error???
i did the same thing with my tab exactly like yours plzzzz help me recover it

[Q] Bricked Captivate -- Unique Situation?

I've flashed 6-8 ROMS on a couple different phones, so not a total noob, but I bow to the vastly superior knowledge here:
My Captivate was running CM7.1 stable from October with no further mods since. I hadn't flashed anything or really messed with the phone in awhile. I was just using the same phone in the same config I had been for 6 months.
A few days ago, CM7 started to force close all my programs. Annoying, but not a problem that rebooting wouldn't probably fix. Rebooted into bootloop (skater logo). 3 Button didn't put me into CWM Recovery, nor would any button combos get me to download mode.
Homemade a jig and got the phone into Download mode, with Odin One Click up and ready to flash to stock. Odin read the phone and I started the flash, but it hung at DO NOT TURN OFF TARGET for a couple hours. I checked on this forum to see what was next. All the previous posts just said to pull battery, re-jig, and start again.
This time, I didn't get the skater, I got the comp!phone. All button & USB combos I've read here bring me comp!phone (even the "hold until two blank screens" one). My PC won't recognize the phone now (so neither will Odin or Heimdall), even after I've reinstalled the Samsung drivers. I've read here that you can flash from the comp!phone screen, but the PC has to see your phone first, obviously.
So I guess I want to know how screwed I am. Magic tips on a easy fix would be just outstanding, too! Is the fact that I wasn't flashing or anything when it bombed interesting to anyone? Thanks in advance...
not sure it's identical but this worked for me: http://forum.xda-developers.com/showthread.php?p=15330252#post15330252
OP,
Check out the "Connection Issues..." Stickied Thread in this forum.
Sent from my SAMSUNG-SGH-I777 using xda premium
Zadig won't load drivers for Heimdall 1-click
I'd tried Heimdall 1-Click Unbrick, but the problem again seems to be with the phone not being recognized. Unbrick runs, fails, and asks if the phone is plugged in.
It refers me to the Resolution Center, where Zadig tries to load the driver, for Captivate, but can't. Zadig provides a dropdown list of devices (my cam, printer, mass storage devices, wireless mouse/keyboard etc.), but the phone isn't listed, and I've tried every USB port. Which is too bad, because that seems like a great tool.
macbuckets said:
I'd tried Heimdall 1-Click Unbrick, but the problem again seems to be with the phone not being recognized. Unbrick runs, fails, and asks if the phone is plugged in.
It refers me to the Resolution Center, where Zadig tries to load the driver, for Captivate, but can't. Zadig provides a dropdown list of devices (my cam, printer, mass storage devices, wireless mouse/keyboard etc.), but the phone isn't listed, and I've tried every USB port. Which is too bad, because that seems like a great tool.
Click to expand...
Click to collapse
If you are still stuck...
Did you actually load a full version of Heimdall? Once I used unbrick as a mini-program. Another time I had to install a full version on my computer in order to get my phone and computer to communicate (that may be the missing driver step).
I know you have probably already done so but search the threads for AdamOutler and his work with Heimdall.
If you're using windows, windows update might be installing the drivers automatically. You might want to disable this feature, uninstall the current drivers and install new ones.
You can also try another pc that doesn't have any installed drivers - just to make sure...
Sent from a Captivate using XDA
macbuckets said:
I'd tried Heimdall 1-Click Unbrick, but the problem again seems to be with the phone not being recognized. Unbrick runs, fails, and asks if the phone is plugged in.
It refers me to the Resolution Center, where Zadig tries to load the driver, for Captivate, but can't. Zadig provides a dropdown list of devices (my cam, printer, mass storage devices, wireless mouse/keyboard etc.), but the phone isn't listed, and I've tried every USB port. Which is too bad, because that seems like a great tool.
Click to expand...
Click to collapse
Did you try manually installing the Samsung/Google usb drivers ? That's the usual culprit since stock are Samsung drivers and roms ( if its Aosp/Cyanogen) the Google drivers prime in that case.
Nearly Identical Problem
I've got the same problem with my Captivate...tried everything I've found in the forums but nothing works.
Background:
I had connection issues before trying to flash, but thought it was a driver issue with my Windows 7 machine. Which is why I had loaded the file onto the SD card when I attempted to upgrade to ICS. During the flash the phone hung and I eventually removed the plug and battery to see if I could reboot. I can get up to the Galaxy S I9000 screen, or the "Downloading..." screen, but I cannot get to the recovery menu or past the initial boot screen. My wife's captivate (same batch) IS recognized by the computer in "download mode" and in the USB transfer mode.
Attempts:
- Installed/uninstalled Kies many times
- Bought and tried a new data cable
- Installed/uninstalled the Galaxy S driver and the Captivate driver many times
- Tried Zadig, Odin, Heimdale, and Adb
- Used programs to remove USB devices and clean registry
- Installed Linux and tried within that OS
- Re-installed Windows 7
- Tried most of the above on my Windows XP system
Has anyone been successful in getting the computer to recognize a Captivate in this circumstance?
macbuckets said:
I'd tried Heimdall 1-Click Unbrick, but the problem again seems to be with the phone not being recognized. Unbrick runs, fails, and asks if the phone is plugged in.
It refers me to the Resolution Center, where Zadig tries to load the driver, for Captivate, but can't. Zadig provides a dropdown list of devices (my cam, printer, mass storage devices, wireless mouse/keyboard etc.), but the phone isn't listed, and I've tried every USB port. Which is too bad, because that seems like a great tool.
Click to expand...
Click to collapse
if u r still facing the problem..and problem isnt solved then just clean the pin of usb connector pin of ur phone...with a thin metal pin..or something like that...
and then u r good to go...
If all else fails...
I managed to brick my Captivate trying to get MUIU off my phone and flash back to Cognition. After many frustrating hours, I contacted Josh at mobiletechvideos.com. He fixed my phone and upgraded me to ICS for $50.00. I mailed my phone to him on a Thursday and received it back the following Friday.
Please use the Q&A Forum for questions &
Read the Forum Rules Ref Posting
Thanks ✟
Moving to Q&A

[Q] Problem with GT-N7000

Hello!
I am a complete noobie when it comes to rooting androids/installing new roms and so on but I for the life of me cannot get my head around this and I keep running into the same problem no matter which way I try.
I attained this phone from a Chinese (and funnily enough bought the phone in China too) friend of mine after she decided to buy herself an Iphone. Before she gave it to me she factory reset it and it came to me stock:
Model Number: GT-I9220
Android Version: 2.3.6
Baseband Version: N7000XXKJ6
Kernel version: 2.6.35.7-N7000XXKKA-CL726566
Build number: ANZHI.COM.AX918
So to start with one of the issues is that I cannot seem to get Windows to pick up my phone as a USB device no matter what I try. I've tried downloading the latest USB drivers from the Samsung Website, installing KIES to manage the device but nothing seems to work it simply will not pick it up as a USB device. I've tried multiple computers too so it would seem to me that there is something wrong with the phone, perhaps she damaged the connector port on it, it does however charge with no problems when connected via USB. This of course stops me from using ODIN or any forms of rooting that require it to be connected through USB. I've also followed the steps on the phone to tell it to connect via USB in the Wireless menu under "USB Utilities" and under the Applications menu for USB development support.
So that aside I was glad to see that there were other options for rooting/installing a new ROM but again I seem to run into issues that I can't explain.
First off, I struggle to find the correct rom for the kernel of my phone anywhere and when I did manage to find it, it was hosted on the HotFile website which has been taken down because of legal issues.
Second is, I've tried the other methods like the "ExynosAbuse" which tells me that my version doesn't need to be rooted and when I try simply installing a new rom (seeing as it seems I do not need to root my device) I keep getting the follow error:
E: failed to verify the whole-file signature
E: signature verification failed
I get these errors for EVERYTHING that I try to install through rebooting my phone into recovery mode and "installing update from external SD." Currently the only method I have for getting the files across to my phone from my PC is through blue tooth and then manually moving them onto the SD card.
The above errors also happen when I try to install the "Clockwork Recovery Mod" by unzipping the file and running it whilst actually logged into the phone and telling it to do a recovery installation.
So basically I am at a loss as to how I can install a new custom rom on my phone, so far everything I have tried just doesn't work.
Perhaps I'm just too green and missing some fundamental step, but I've been reading/googling now for the last 2 days and it just doesn't look hopeful.
Anyone out there able to shed a little more light into this for me?
Thanks!
You have a Gingerbread version of recovery and it does not flash zip file from recovery as you already tried. You will need to update to ICS or above to use that method of rooting. Unfortunately the imo the only way is to get the USB port working so you can either update the rom or install a recovery using Odin unless some other member has to add.
Have you tried a different USB cable?
nokiamodeln91 said:
You have a Gingerbread version of recovery and it does not flash zip file from recovery as you already tried. You will need to update to ICS or above to use that method of rooting. Unfortunately the imo the only way is to get the USB port working so you can either update the rom or install a recovery using Odin unless some other member has to add.
Have you tried a different USB cable?
Click to expand...
Click to collapse
Yeah I've tried several different USB cables but still no luck.
So basically I'm screwed if I cannot get the USB to function?
Anyone got any ideas or can I pretty much just discard the phone if I can't get it to connect via USB?
Hate to post again but I'm sorta desperate, I need to know if there is something that I can with the phone or not.
Thanks!
When you try to connect to PC, if there is some action triggered by windows asking for driver somethingvthen it is driver problem. If there is no action from window then usb cable or port. You can also try to check in window device manager.
May want to try to clean usb port or look for a technician who can replace the port.
Btw, there seems to be a temporary cwm.zip which will flash and then it help you to flash proper kernel or rom. That cwm.zip is dangerous if you are using ics or jb rom. But GB rom should be fine. That is all I can think of.
Sent from my phone.
I don't think the temp cwm.zip will also be accepted by the GB recovery and will come as signature failed.
Thanks for the responses, I think the port is damaged so how because it just won't even respond in windows but it does however charge fine.
Anyways I'll look at getting a replacement port on it!
Thanks again!

Categories

Resources