Hello,
My phone indicates that there is an update: 2.11.531.19 (532.26MB). I click Install now, nothing happens, boots into recovery and that's it. No installation going on. Any ideas about that?
Best Regards
p.s. That's what I see on the recovery
Please remove my roms thread title, your question has nothing to do with my rom
done
Related
Hello,
I have a nexus one that isn't working anymore. I was trying to install the cyanogenmod, but I guess I didn't do it correctly.
I was following the clockworkmod way from this: h t t p ://wiki.cyanogenmod.com/index.php?title=Nexus_One:_Full_Update_Guide
When flashing the rom something went wrong. After step 6 my phone didnt reboot, it just stayed off. Now it will only give me the nexus sign if i turn on the phone.
I can still acces the recovery menu when holding Power + volume down.
People told that I should go back to the stock rom.
Can anybody please help me?
*don't know if i've posted in the right category
When you get to recovery is it still clockwork or stock? If clockwork then try and flash cm6 again. If not you will have to download a stock rom push it to the sdcard as an update.zip and boot into the boot loader.
Sent from my Galaxy Tab, that makes phone calls
Since you can boot into recovery you have NOT bricked it for sure
As mentioned in the earlier post try to flash the CM ROM again
If you are unable to access the custom recovery (as in, the stock recovery is still in place), you can follow the manual instructions for installing ClockworkMod: http://wiki.cyanogenmod.com/index.php?title=Nexus_One:_Full_Update_Guide#Manual_Method
You can then follow the procedure for flashing the appropriate radio image: http://wiki.cyanogenmod.com/index.p...ll_Update_Guide#ClockworkMod_Recovery_process
And you can even install the ROM without using Rom Manager using this process: http://wiki.cyanogenmod.com/index.p...Update_Guide#Second_Method_.28via_Recovery.29
All of this is, as I'm sure you've noticed, posted on the same page that you linked. Hopefully this information will help you, now that you have been assured that your phone is not bricked.
Thanks for quick replies. I've contacted a guy with a lot of knowledge about these kind of thinks and helped me fixing me phone. I dont know exactly what went down but I will give it a try.
My first mistake was thinking that I rooted my phone (using the one click method). Don't know if thats the right way to do it, but in the end it wasn't rooted and I tought it was.
The guy rooted my phone, did the AmonRa recovery install and installed the Ethernom Rom for me. Great to have my phone back to working and great Rom btw.
[SOLVED -- Read my last post]
Posting on forum was my last resource, but I've tried literately almost everything I can possible find.
I already bricked my phone and had to unbrick, do everything (update firmware etc) all over again.
I am at a point where I am afraid to do something new to my phone now without knowing what they are...
Please bare with me, I am not familiar with exactly what flashing is or whatnot, I just followed the instructions and got where I am....
K, recently I decided to wipe my phone CLEAN and update to new CyanogenMod 9 from factory mode.
So, I have Captivate, I897. It was ECLARE with 2.1 firmware.
I have updated to 2.3.5 (Gingerbread [I897UCKJ2]), Rooted.
I had to Flash BACK to KK4_stock_kernel.tar for me to use WIFI again because I had issue after Rooting my phone, I couldnt access the WIFI.
I installed Clockwork mod (Free version).
My goal is to install CyanogenMod 9, and part of the process requires me to enter the CMW Recovery Mod.
I dont even know what this looks like, but all I know is whenever I boot my phone, after the AT&T logo animation it seems to go into this "messed up" screen, where as if my phone is broken. Stays there for 3 seconds and then continues to boot back to its OS.
In ROM manager, it says Flash ClockworkMod Recovery (You must have the clockworkmod recovery installed to flash and restore ROMs!)
Another option within ROM manager is, Reboot into Recovery (Boot into Recovery mode for manual management.), which if I do access it, it takes me back to that AT&T logo animation and that "messed up" screen again, but this time it stays there. Where all kinds of colored pixels are on my screen as if my screen is broken. It will only continue to boot back to my OS if I press power button or some sort.
Im guessing that's my Recovery Mod, which my phone for some reason cannot see?
So I tried "Download ROM (Upgrade to ROM Manager (premium) to access the full list of ROMs!", hoping this may cure that messed up screen effect, which I think is the Recovery Mod for all I know... When I click to install, it gives me Confirm Phone Models. None are my phone model for me to install.. (It only gives me Google Nexus S / Google Nexus S 4G / Samsung Epic4G / Samsung GalaxyS i9000).
Earlier, I was looking at this, http://forum.xda-developers.com/showthread.php?t=1127578
which is a way to fix recovery mod(?) But I have NO idea how to even install those files... Maybe not the .tar file but the other one.
Please help? Am I the only one experiencing this kind of problem? Couldnt find anywhere else on youtube / google / forum..
Thank you VERY much in advance, really appreciate it..
-Dan.
danroh said:
I had to Flash BACK to KK4_stock_kernel.tar for me to use WIFI again because I had issue after Rooting my phone, I couldnt access the WIFI.
-Dan.
Click to expand...
Click to collapse
This is your likely problem right here. The Kernel that is installed during the rooting process and typically when you install custom roms is what is responsible for installing and therefor you being able to access the CWM recovery. Flashing back to the stock kernel likely messed things up for you.
http://forum.xda-developers.com/showthread.php?t=1300843
Now if you follow that link it will take you to several one click options for flashing your phone to stock gingerbread but with a kernel containing CWM. Also keep in mind that it is possible you could have wifi issues if you've had them in the past, but if your goal is to get to CM9 just ignore the wifi for the time it shouldn't be an isuse in the end.
Hey OP,
See this.... TRusselo's Flashing Guide
Sent from my SAMSUNG-SGH-I897 using xda premium
You need Gingerbread bootloaders.
Thanks guys! I figured out the problem and solved it!
Like you guys said, I didnt have the bootloader. The gingerbread I installed was the no bootloader version. After reinstalling to the one with bootloader, I was able to access the recovery mod and that "rainbow screen" glitch was no more.
Thank you!
I have messed my new Mot G 5inch 2nd generation phone up really bad
any help would be greatly appreciated.
I unlocked the bootloader then tried (unsuccessfully) to root. It just wouldn't take on any method I tried.
So I had the great idea to reinstall the firmware (in the hope that a clean install would help), following this guide here... http://techtrickz.com/how-to/how-to...irmware-on-2nd-gen-moto-g-2014/#comment-16531.
While I was going down the cmd list it failed on boot and recovery giving me the error 'hab check failed for boot’ (and the same for recovery.
I carried on down the list as I was stuck now and when I've rebooted the 'unlocked' page comes up but then all that happens is the screen flickers on/off with nothing else happening.
I got into recovery once (green man with triangle) and noticed that adb sideloading was there if that helps.
I'm in the uk.
any help would be massively appreciated.
i don't know anything about the phone in question as i have the first one. all i can say is have you tried going to @rootjunky;s site and ask him if maybe he can help you. i think he has already rooted and installed custom recovery. worth a shot. he is pretty good. any way good luck.
If you can boot into the bootloader, here is a guide that will help you out.
http://forum.xda-developers.com/moto-g-2014/general/restore-to-stock-t2873657
Kindly correct the title. Exclamation mark doesn't clarify what you are trying to ask. Some users may just ignore your post if you Title your threads like this.
Cam you boot into bootloader? (power + volume down) if yes try flashing a recovery downloaded from here. If that works too, try downloading a rom, copying it to USB storage (by mounting via recovery) and flashing that
Hello everyone.
I don't know what happened but my device entered in the infamous bootloop. I tried to erase cache, partition, reinstall a rom, install a different rom and nothing.
My true problem is that last night I made a horrible mistake: I erased everything including my SD card, which contained the data for boot to recovery. Right now I can only see the SONY logo when I power up my device and nothing else.
I tried to install recovery via fastboot flash boot boot.img but I can't keep my device in fastboot. I mean, I connect my device and hold Volume Up but after a few seconds it continuous to the SONY logo and stays there forever.
Am I missing something? What can I do to reintall a recovery if I can't access my phone data?
Thank you.
How to install recovery in a phone which can't start [Solved]
I just figured it out! I installed Sony's stock rom following this guide and my phone is alive again.
bbabel said:
I just figgured out! I installed Sony's stock rom following this tutorial and my phone is alive agaoin.
Click to expand...
Click to collapse
Good you managed to fix it and posted it back here with a solution. So few people do it. On the side note, link you provided does not work, please fix if you can
kwitu said:
Good you managed to fix it and posted it back here with a solution. So few people do it. On the side note, link you provided does not work, please fix if you can
Click to expand...
Click to collapse
Thank you. I just fixed the link and now it works.
Hello, I have been searching for a way to install TWRP.
So far I have tried ADB push with success, but just loads back to rom when it reboots.
Its annoying the hell out of me, I have got ROOT, BOOT Unlocked.
If any one has any ideas please feel free to post it, no matter what it is.
how about installing from the playstore Twrp manager?
or YouTube there are a lot of videos to install it
Thanks for the reply, tried using the twrp manager, it just restarts the phone and goes back to the rom after install and when I try to restart to recovery it just reboots back to the Rom.
When I hold Volume down + power it only shows a green android icon for a couple of seconds then restarts back to rom.
Squida said:
Hello, I have been searching for a way to install TWRP.
So far I have tried ADB push with success, but just loads back to rom when it reboots.
Its annoying the hell out of me, I have got ROOT, BOOT Unlocked.
If any one has any ideas please feel free to post it, no matter what it is.
Click to expand...
Click to collapse
Try install XZ dual recovery by nut here XZDualRecovery_2.8.26 , hope its help
Thanks for the link to the other recovery. I fixed TWRP not booting, by using Sony easy root and once I used that, it booted TWRP.