OTA captured for MyPhone UNO LP 5.x.x
Download Link :
LBY29G to LMY47O (LP 5.1.0)
OFFICIAL OTA LMY47O For Stock Recovery
MODIFIED OTA LMY47O For Custom Recovery
LMY47O to LMY47V (LP 5.1.1)
OFFICIAL OTA LMY47V For Stock Recovery
UNIVERSAL OTA LMY47V for SPROUT4 and SPROUT8 (11+ MB)
LMY47V to LMY48K (LP 5.1.1)
UNIVERSAL OTA LMY48K for SPROUT4 users (Custom Recovery)
NOTE: Only compatible w/ Stock LP unmodified. If you are rooted and unlocked, try the Modified and Universal OTA and make sure to fully unroot your device before proceeding to prevent bootloop...No need to wipe data unless you encountered problems.
Official OTA : Original OTA from google without any modification
Modified OTA : updater-script was modified (OLD) (For MyPhone UNO Only)
Universal OTA : updater-script was modified to support all Android One 1st gen devices
Flashing Instructions:
• Download the file
• Place the OTA zip on your sdcard
• Reboot to stock recovery/custom recovery and install ota file
• Reboot and be patient
MD5 checksum
Official : 545d3ad27d47110fa62c19de3c8932fb
Modified : b27757151d666f8a1c0a47111da8e9c6
STOCK ROM : SPROUT
Flash at your own risk
Credits : google, xda, varun.chitre15, yuweng, carliv, AandreHartmen, GeloJuvida, JosephGodslave
.
Ohh !! Thank god it's finally here
I've been dying for this update
Tnx dude ur the best!!
Speaking of stock recovery... I don't have it. I replaced it with CWM. Can you provide one if possible? The one located in this thread is from KK, and makes the zip file think my phone (pun not intended) is still on KK. If you can't then I'll just wait for the rom instead.
staircases said:
Speaking of stock recovery... I don't have it. I replaced it with CWM. Can you provide one if possible? The one located in this thread is from KK, and makes the zip file think my phone (pun not intended) is still on KK. If you can't then I'll just wait for the rom instead.
Click to expand...
Click to collapse
Sadly, I forgot to backup the stock recovery of this device just flash the stock recovery of other android one devices such as the mmx canvas A1 http://forum.xda-developers.com/canvas-a1/development/official-stock-rom-canvas-a1-t2887150... or the cherry mobile one http://intersectraven.euroskank.com/stock/Android One/LBY29G/
This OTA will not work on Kitkat because its only 20+mb. The OTA for MMX Canvas A1 is advisable if you are on KK http://forum.xda-developers.com/cro...l/ota-micromax-official-ota-captured-t3058879. I will upload the stock rom tomorrow or on saturday.
Edit : Dude, make a backup and try to flash the Modified OTA
LMY47O to LMY47V (LP 5.1.1)
UNIVERSAL OTA LMY47V for SPROUT4 and SPROUT8 (11+ MB)
Credits to the one who captured the OTA links for Sparkle V and Symphony Roar A50...
I'm on stock canvas a1 with LP 5.1. Will my phone still be official and pure stock if I use the universal OTA?
UPDATE: I decided to go ahead and try. Downloaded universal ota for 4gb variant. Got these error messages. "failed to verify whole signature, signature verification failed, installation aborted".
-BRK- said:
I'm on stock canvas a1 with LP 5.1. Will my phone still be official and pure stock if I use the universal OTA?
UPDATE: I decided to go ahead and try. Downloaded universal ota for 4gb variant. Got these error messages. "failed to verify whole signature, signature verification failed, installation aborted".
Click to expand...
Click to collapse
All the 4gb variants OTA's have identical contents and signature except the updater-script. So Yes, your MMX A1 will still be official. The problem is you need custom recovery, there is an info on how to temporarily boot Custom Recovery on this forum. If you manage to do that, after flashing the OTA just reboot and your phone will still be unmodified with warranty Try that one bro
dear staircases,
i will check if i manage to extract the STOCK RECOVERY from the Nandroid backup i made then i hope i could email you. my build number is: LMY47V... (*I did the nandroid backup via devam03's wonderful tutorial: http://forum.xda-developers.com/cro...-stock-rom-t2948442/post59564925#post59564925)
hope to get back to you later,
bod68
Thanks sir
Credits :- @Grarak for Recovery. @Spannaa for inspiration and SuperSU (SuperSU here is just a Systemless version made by him). I really wish Spannaa gets an OP3 and maintains this. No one can replace him.
First of all, sorry for not publishing it at XDA earlier. I kinda forgot.
The latest full version can be downloaded directly from OnePlus downloads.
There are two types of file for each ROM: signed flashable zips and OTA incremental update zips.
Signed flashable zips: These are recovery-flashable zips of the full ROM that won't overwrite your data partition. They can be flashed via stock or TWRP recovery.
OTA incremental update zips: These are recovery-flashable zips that update your rom to a newer version. They can be flashed via stock or TWRP recovery but will only work on non-rooted devices with no modifications to system files.
I've also included links for TWRP custom recovery and SuperSU.
Note: Since OTA incremental update zips will fail on rooted devices or devices with modifications to system files, it's not possible to use these to update without reverting back to completely stock, unrooted first.
To update you must either wait for the new, full, signed flashable zip to appear (usually a few weeks after the OTA update) or use the following workaround:
Boot into TWRP recovery
Flash the latest full signed flashable zip
Flash the new OTA incremental update zip
Flash the SuperSU zip
Reboot
The result is exactly the same as if you'd flashed the new, full rom zip.
Signed flashable zips
OxygenOS 3.1.2 :- OnePlus3Oxygen_16_OTA_007_all_1606062247_8f031965d7db4420.zip
OxygenOS 3.1.3 :- OnePlus3Oxygen_16_OTA_008_all_1606122244_e0cfc5ffc8bf411a.zip
OxygenOS 3.2.0 :- OnePlus3Oxygen_16_OTA_010_all_1607012342_741e629725ed457b.zip
OxygenOS 3.2.1 :- OnePlus3Oxygen_16_OTA_011_all_1607052050_0e5983ace5314161.zip
OxygenOS 3.2.2 :- OnePlus3Oxygen_16_OTA_012_all_1607251520_5926eed75c18470f.zip
OxygenOS 3.2.4 :- OnePlus3Oxygen_16_OTA_013_all_1608061823_765c081a5c8e4dad.zip
OxygenOS 3.2.6 :- OnePlus3Oxygen_16_OTA_015_all_1609141252_c38077177cfc4e74.zip
OxygenOS 3.2.8 :- OnePlus3Oxygen_16_OTA_017_all_1611182000_fbe1471194d64b3e.zip
OxygenOS 4.0 :- OnePlus3Oxygen_16_OTA_035_all_1612310359_e10cadfb2af7.zip
OxygenOS 4.0.1 :- OnePlus3Oxygen_16_OTA_037_all_1701041839_aa64b084a40a4.zip
OxygenOS 4.0.2 :- OnePlus3Oxygen_16_OTA_039_all_1701140133_03b794d8a8b44883.zip
OxygenOS 4.0.3 :- OnePlus3Oxygen_16_OTA_041_all_1702081756_f9fb218af59d4aa6.zip
OxygenOS 4.1.0 :- OnePlus3Oxygen_16_OTA_047_all_1703132116_f7372e67.zip
OxygenOS 4.1.1 :- OnePlus3Oxygen_16_OTA_049_all_1703242056_9c23637940057e.zip
OTA incremental update zips
OxygenOS 3.2.4
...............................................
OxygenOS 3.1.0 -> OxygenOS 3.2.4 : https://www.androidfilehost.com/?fid=24665542585483652
OxygenOS 3.1.1 -> OxygenOS 3.2.4 : https://www.androidfilehost.com/?fid=24665542585483650
OxygenOS 3.1.2 -> OxygenOS 3.2.4 : https://www.androidfilehost.com/?fid=24665542585483653
OxygenOS 3.1.3 -> OxygenOS 3.2.4 : https://www.androidfilehost.com/?fid=24665542585483654
OxygenOS 3.1.4 -> OxygenOS 3.2.4 : https://www.androidfilehost.com/?fid=24665542585483647
OxygenOS 3.2.0 -> OxygenOS 3.2.4 : https://www.androidfilehost.com/?fid=24665542585483649
OxygenOS 3.2.1 -> OxygenOS 3.2.4 : https://www.androidfilehost.com/?fid=24665542585483651
OxygenOS 3.2.2 -> OxygenOS 3.2.4 : https://www.androidfilehost.com/?fid=24665542585483648
OxygenOS 3.2.2
...............................................
OxygenOS 3.1.0 -> OxygenOS 3.2.2 : https://www.androidfilehost.com/?fid=24591000424950207
OxygenOS 3.1.1 -> OxygenOS 3.2.2 : https://www.androidfilehost.com/?fid=24591000424950202
OxygenOS 3.1.2 -> OxygenOS 3.2.2 : https://www.androidfilehost.com/?fid=24591000424950206
OxygenOS 3.1.3 -> OxygenOS 3.2.2 : https://www.androidfilehost.com/?fid=24591000424950204
OxygenOS 3.1.4 -> OxygenOS 3.2.2 : https://www.androidfilehost.com/?fid=24591000424950201
OxygenOS 3.2.0 -> OxygenOS 3.2.2 : https://www.androidfilehost.com/?fid=24591000424950205
OxygenOS 3.2.1 -> OxygenOS 3.2.2 : https://www.androidfilehost.com/?fid=24591000424950203
OxygenOS 3.2.1
...............................................
OxygenOS 3.1.0 -> OxygenOS 3.2.1 : https://www.androidfilehost.com/?fid=24591000424945012
OxygenOS 3.1.1 -> OxygenOS 3.2.1 : https://www.androidfilehost.com/?fid=24591000424945013
OxygenOS 3.1.2 -> OxygenOS 3.2.1 : https://www.androidfilehost.com/?fid=24591000424945008
OxygenOS 3.1.3 -> OxygenOS 3.2.1 : https://www.androidfilehost.com/?fid=24591000424945009
OxygenOS 3.2.0 -> OxygenOS 3.2.1 : https://www.androidfilehost.com/?fid=24591000424945003
OxygenOS 3.2.0
...............................................
OxygenOS 3.1.0 -> OxygenOS 3.2.0 : https://www.androidfilehost.com/?fid=24591020540823769
OxygenOS 3.1.1 -> OxygenOS 3.2.0 : https://www.androidfilehost.com/?fid=24591020540823768
OxygenOS 3.1.2 -> OxygenOS 3.2.0 : https://www.androidfilehost.com/?fid=24591020540823766
OxygenOS 3.1.3 -> OxygenOS 3.2.0 : https://www.androidfilehost.com/?fid=24591020540823770
OxygenOS 3.1.2
...............................................
OxygenOS 3.1.0 -> OxygenOS 3.1.2 : https://www.androidfilehost.com/?fid=24591020540823771
OxygenOS 3.1.1 -> OxygenOS 3.1.2 : https://www.androidfilehost.com/?fid=24591020540823772
TWRP & SuperSU
TWRP
SuperSU
Stock Recovery :-
https://www.androidfilehost.com/?fid=24671309938032896
A few weeks?
What's this then? http://otafs.coloros.com/patch/amaz...6_OTA_010_all_1607012342_741e629725ed457b.zip
anessie said:
A few weeks?
What's this then? http://otafs.coloros.com/patch/amaz...6_OTA_010_all_1607012342_741e629725ed457b.zip
Click to expand...
Click to collapse
This thread is a collection of OTAs and Full ROMs on mirrors so that even when OnePlus removes them from official places,they are still available. Also, official link is too slow, TBH. On my 100 Mbps, it is downloading at clost to 100 kBps.
See OnePlus One or OnePlus 2 section to know what I mean. These mirrors are always helpful and fast.
Tnk alot naman..
Sent from my ONEPLUS A3003 using XDA-Developers mobile app
Thread Updated.
Changelog :-
Added Full ROMs :-
OxygenOS 3.2.0
i tried to flash full rom 3.2.o in twrp but get no luck ( download from something amzone ota.... i found in xda ) it stuck forever in install script. while 3.1.3 works fine
did you modified anything in your AFH upload ? how i could install this ? thanks
thanhnvt194 said:
i tried to flash full rom 3.2.o in twrp but get no luck ( download from something amzone ota.... i found in xda ) it stuck forever in install script. while 3.1.3 works fine
did you modified anything in your AFH upload ? how i could install this ? thanks
Click to expand...
Click to collapse
This is unmodified signed Zip. If you can't flash that zip, chances are you won't be able to even flash this. Grab me a recovery log so that I can find the issue. Please note that it takes some time for progress bar to move though.
i tried another way then it worked,
if i reboot after 008 then reboot, it switch to my twrp, then 1 get error7 with ota zip
Flash full rom 008 then OTA 008-010 then reboot, finally it works, dunno what happened
thanhnvt194 said:
i tried another way then it worked,
if i reboot after 008 then reboot, it switch to my twrp, then 1 get error7 with ota zip
Flash full rom 008 then OTA 008-010 then reboot, finally it works, dunno what happened
Click to expand...
Click to collapse
Actually just flashing full ROM twice also fixes the issue. I had the same with 3.1.2 Full Zip. First flash returned error. Second flash succeeded.
Are the OTAs region specific?
Naman Bhalla said:
Actually just flashing full ROM twice also fixes the issue. I had the same with 3.1.2 Full Zip. First flash returned error. Second flash succeeded.
Click to expand...
Click to collapse
i will try later & report if it works or not, thanks you
shashankj said:
Are the OTAs region specific?
Click to expand...
Click to collapse
No.
Naman Bhalla said:
No.
Click to expand...
Click to collapse
I don't see the Install from local option in stock recovery. Is there some setting that i need to turn on?
shashankj said:
I don't see the Install from local option in stock recovery. Is there some setting that i need to turn on?
Click to expand...
Click to collapse
You have to ADB Sideload. Because of encryption, you can't do Install from Local.
Question... I'm sure I know the answer, but want to confirm. If we have SuperSU and XPosed flashed, then we need to do the full image, which although it won't delete data will make the phone like new, yes?
Orito said:
Question... I'm sure I know the answer, but want to confirm. If we have SuperSU and XPosed flashed, then we need to do the full image, which although it won't delete data will make the phone like new, yes?
Click to expand...
Click to collapse
Yes. You need to flash full ROM. And then again root and xposed.
@Naman Bhalla, I'm rooted,installed xposed and also disabled forced encryption.Here i want to ask if i flash full 3.2.0 zip and then supersu via twrp,whether my phone remains non encrypted or encrypted
JumboMan said:
@Naman Bhalla, I'm rooted,installed xposed and also disabled forced encryption.Here i want to ask if i flash full 3.2.0 zip and then supersu via twrp,whether my phone remains non encrypted or encrypted
Click to expand...
Click to collapse
I haven't tested it myself. So, can't say for sure. Actually by encryption, we mean data is encrypted. So, it is basically wrong to say phone will become encrypted or so. But the newer files will/should be encrypted making some other files inaccessible or so. Thus, it suggest you to immediately flash a kernel that is decrypted by default after flashing OOS 3.0.2
Naman Bhalla said:
You have to ADB Sideload. Because of encryption, you can't do Install from Local.
Click to expand...
Click to collapse
Thanks, it worked.
Great work mate @Naman Bhalla
This was much needed !Kudos!
Sent from my ONEPLUS A3003 using Tapatalk
Moto G (3rd Gen) xt1548
Sprint/Boost/Virgin Mobile
TWRP Flashable Unmodified 6.0.1 Stock ROM
SPECIFICATIONS
Model No: XT1548
Carrier(s): Sprint, Virgin Mobile, Boost Mobile
Android Version: 6.0.1 Marshmallow
Build No: MCIS24.107-82-18
System Version: 24.221.18.en.US
Android Security Patch Level: April 1, 2017
Kernel Version: 3.10.49
Baseband Version: M8916_2020632.44.03.21.54.01R
DISCLAIMER:
Your warranty is now void. As always, please be reminded that flashing the partitions of your device involves an inherent risk of bricking or otherwise rendering your device inoperable. I will not be held responsible for any good or bad that results from flashing the files from the herein link. You - and you alone - are solely responsible for your device.
NOTE: If you are coming from stock Android 5.1.1 Lollipop or from an earlier build of stock 6.0.1, the bootloader and partition index were updated with this build. It is strongly recommended, to ensure stability and optimized performance, that you flash the Bootloader & Partition Index updater in the downloads link below. In addition, this recent 6.0.1 build for the xt1548 includes an updated Baseband. While not absolutely required, it is recommended that you update your Baseband prior to flashing this ROM. I have compiled an updater zip which will update your Baseband (Modem & Radio Firmware) to the most recent version. Simply flash this zip using the current TWRP recovery. This updater zip can be downloaded here: https://drive.google.com/file/d/0B1Sfod4HWfk2blpURnRIVjg3WDQ/view?usp=sharing
REQUIREMENTS:
1. Unlocked Bootloader
2. TWRP Recovery (preferably @squid2's current version)
SOURCE INFORMATION:
KERNEL: https://github.com/moto8916/android_kernel_motorola_msm8916
DEVICE TREE: https://github.com/MotoG3/android_device_motorola_osprey
MENTIONS & THANKS:
I would like to say thank you to @squid2 for his hard work in building the Squid TWRP custom recoveries and Squid Kernels for our Osprey devices. I would also like to thank @lost101 for taking the time to educate me on the subjects of update-binary and updater-script.
INSTRUCTIONS:
1. Download the ROM zip from the below link and store it either on the internal storage of your device, or on an external micro SD card;
2. Boot your device into TWRP recovery. Perform a full wipe(/system, /data, /cache, /dalvik cache);
3. It is strongly recommended that you install the bootloader & partition index updater from the below link. NOTE: If you install the updater, NEVER ATTEMPT TO DOWNGRADE YOUR BOOTLOADER OR PARTITION INDEX. You can always downgrade to an earlier version of Android without issues; simply avoid bootloader.img and gpt.mbn;
4. Install the Baseband updater (OPTIONAL);
4. Select "INSTALL" from TWRP's main screen and navigate to the location in which you saved the ROM zip. Commence with installation. Flashing will complete in approximately 2 to 3 minutes. Wipe dalvik cache. Reboot system. NOTE: first boot can take several minutes. Just be patient and don't interrupt the process.
You should now have the latest stock Android 6.0.1 installed on your Osprey.
DOWNLOAD LINK:
Unmodified Stock 6.0.1 ROM:https://drive.google.com/file/d/0B1Sfod4HWfk2dnE5d1FNQk5INUk/view?usp=sharing
Bootloader/Partition Index Updater: https://drive.google.com/file/d/0B1Sfod4HWfk2TTNDY2VKMWJRSkk/view?usp=drivesdk
Stock Recovery image: https://drive.google.com/file/d/0B1Sfod4HWfk2Nm42QUJ5NklDdHM/view?usp=sharing
any updates for XT1550?
Crimsongrey said:
any updates for XT1550?
Click to expand...
Click to collapse
Been having trouble with the update-binary file on xt1550. Because I don't own the device it makes it difficult.
R u working on xt1550 Also....
abhi8939 said:
R u working on xt1550 Also....
Click to expand...
Click to collapse
Yes. I've been trying it. Where I don't own an xt1550, I've had a difficult time writing a working updater-script.
stock recovery image google drive link broken
thank you.
I found an easy and convenient way to flash Huawei updates when twrp is installed. No data loss. In my case I updated from June to July patch without any hiccups.
1. Download the HWOTA8 folder zip to your device and extract it to the root of your SD card. I provided the link at the bottom of the tutorial.
2. Download the Huawei update and wait till it finished.
3. Boot to twrp and go straight to the HWOTA8 folder.
4. Now install the hwota8_update.zip, this will install a special no check version of the stock recovery.
5. After reboot you'll see a failed update attempt, ignore the message and boot to system.
6. Now that we have the stock recovery you can go straight to the update app in the settings and install the update.
7. After 5 minutes the update should be finished and the device will boot to system.
8. The bootloader will be still unlocked so you can modify again with twrp, magisk and so on. No data loss.
Download
https://mega.nz/#!7AxVwBBZ!W9YyQ7qSAxZo-px8xYR18rBIhycKlqOhS4n8ogTioaI
gude, tried this today to upgrade P10plus from .382 to .385. worked as promissed. afterwards just installed the TWRP and magisk to get back root. thx
Dear Sir,
Thank you for the clear and concise method for flashing stock updates when TWRP is installed.
Please help me with instructions how to upgrade my unlocked, rooted and TWRP installed Android 7 ROM to OREO.
My phone model number is: VKY-L09
Build number: VKY-L09C02B102
EMUI version: 5.1
Android: 7.0
Kernel: 4.1.18-gfd75bb
TWRP: 3.1.0-0
there is only one thing that makes me wonder: i cannot install a differential update, this always fails, so the complete package will download ( almost 3GB ), then the installation will be successful. any idea why?
Running the version from November 2020 i want install the new one, my phone is unlocked, recovery TWRP . i download the firmware zip file from Asus web can i install using the recovery TWRP