Database Develop

[STICKY] I9505G GE GALAXY S IV ( INDEX ) ROM's / LINKS / HOW TO THREAD

Welcome to the [STICKY] I9505G GE GALAXY S IV ( INDEX ) ROM's / LINKS / HOW TO THREAD formally the DISCUSSION GUIDE ​
This is the Official Index Roll up thread for the I9505G Google Edition Galaxy S IV. In this Index you will find helpful, links, guides, how to's and instructions for your I9505G.​
Please Post any links or helpful information in this thread or you can PM me so I can link it in the OP ( If your on the I9505/I9500 Please do NOT ASK about development for your device this is for the I9505G ONLY
(DISCLAIMER) As always I nor anyone is responsible if you cannot follow instructions in this or any other thread. We assume NO liability for bricks, loss of job, or the end of life as we know it.
GUIDES & LINKS
How to get CM 10.1 & CM 10.2 working on the I9505G
How Unlock the Bootloader for the I9505G
[OTA] OTA ZIP 4.3 for I9505G
How to Update your Baseband to get the 4.3 OTA
TOUCHWIZ Development Thread Q&A
Camera Save to SD Card for Google Edition ROM's
I9505G How to Set Device Mount Points in Android Kitchen GE S IV
4.3 SD Card Issue Fixed
How to upgrade a Stock+Root+Custom_Recovery I9505G from 4.3 to 4.4 and keep all Data​
ROOTING THREADS
How to Root 4.2, 4.3, 4.4 JB, Kit Kat I9505G
ROM's
[ROM][Linaro-4.8] XenonHD-4.4.2 Alpha 1 (5/1/14) *Truly Stable, Fast & Butter​
GOOGLE LITE EDITION 4.2.2 v.2 MFD
GOOGLE LITE EDITION 4.3 I9505GUEUBMH1 Ktoonsez Kernel
TOUCHLITE GE TOUCHWIZ ROM
[ROM] Google Edition 4.3 [Clean][Deodex][276MB]​
RECOVERY
How to install TWRP via Odin on the I9505G
TWRP for the I9505G
[BETA][RECOVERY] ClockworkMod Recovery 6.0.3.6​
[ODIN[TAR] Stock Recovery Images
MODEMS
ODIN TAR MODEMS
STOCK FIRMWARE LEAKS
Stock ODIN FIRMWARE Leaked 4.3 MFP ​
Stock ODIN FIRMWARE Leaked 4.3 MG8​
ODIN AND HEIMDAL PACKAGES​
Stock HEIMDAL 4.2.2 MFD back to Stock​
[ODIN][TAR] I9505GUEUAMFD 4.2.2 Full Rooted Restore
[ODIN][TAR] I9505GUEUBMH1 4.3 Full Rooted Restore
[ODIN][TAR] I9505UEUBMH5 4.3 Full Rooted Restore
[ODIN][TAR] I9505GUEUBMKG 4.4 Full Rooted Restore
[ODIN][TAR] I9505GUEUBML4 [4.4.2] Full Rooted Restore​
[ODIN][TAR] 4.4.3 I9505GUEUCNE3 Full Rooted Restore​
[ODIN][TAR] 4.4.4 I9505GUEUCNF3 Full Rooted Restore​

Reserved
Big Thanks to Illogic6 for being the Very 1st Person to get Touchwiz Booted to the I9505G post #31 and SamuriHL for solving the Baseband Update Issue and Chainfire
Modem Update : Due to the secure boot loader we cannot flash modems via cwm or any other custom recovery. You MUST update your firmware via Odin
Touchwiz Works with some ROM's like BareBones from the I9505 forum being successfully booted on the I9505G. TW Development is ongoing for the I9505G but with the small partition size some issues exist, and are being researched and worked out.
http://forum.xda-developers.com/showthread.php?t=2405273
11/28/2013 : KitKat initial release this week New Updated Odin Packages and ROM's please check A&D section
DONT FORGET TO THANK THE MEMBERS AND DEVS WORKING HARD ON THE I9505G DEVELOPMENT
07/21/2014: I just wanted to make a note that I still get emails and requests for help and although I am no longer doing any sort of work on the I9505G I will try to help you out if you PM me. PLEASE BIG THANK YOU TO @SamuraiHL he is really the one maintaining everything for I9505G Owners and if you have not thanked him please do. Actually without volunteering him he is your best POC for anything current. I will maintain the thread for organization now and then. ALOHA

MJHawaii said:
Reserved :good:
Click to expand...
Click to collapse
Nice to see someone do this. Hope this will build up and morph into ROM's, etc.
How is your ROM coming along?

wilbarger said:
Nice to see someone do this. Hope this will build up and morph into ROM's, etc.
How is your ROM coming along?
Click to expand...
Click to collapse
Right now just standard kitchen tweaks on 4.3 but I am trying to get the whole device mount points set up in Cygwin and I'm having trouble because when I extract everything and open up the recovery.fstab file with notepad ++ it does not show anything but 0p1 nothing for system, boot & data so I'm lost and need help
Sent from my GT-I9505G using Tapatalk 2

MJHawaii said:
Right now just standard kitchen tweaks on 4.3 but I am trying to get the whole device mount points set up in Cygwin and I'm having trouble because when I extract everything and open up the recovery.fstab file with notepad ++ it does not show anything but 0p1 nothing for system, boot & data so I'm lost and need help
Sent from my GT-I9505G using Tapatalk 2
Click to expand...
Click to collapse
One person you might contact is mohan_kr. He has come over to the S4 from the Skyrocket recently. Excellent at working on the ROM's. Sorry I can not be of assistance, but I am not very advanced on Android.

wilbarger said:
Nice to see someone do this. Hope this will build up and morph into ROM's, etc.
How is your ROM coming along?
Click to expand...
Click to collapse
wilbarger said:
One person you might contact is mohan_kr. He has come over to the S4 from the Skyrocket recently. Excellent at working on the ROM's. Sorry I can not be of assistance, but I am not very advanced on Android.
Click to expand...
Click to collapse
That's what this thread is for though for everyone to get together share information and collaborate.

Chahk's post about mount points and getting other CM/AOSP ROMs working on I9505G deserves its own link:
http://forum.xda-developers.com/showpost.php?p=43843048&postcount=30

MJHawaii said:
Right now just standard kitchen tweaks on 4.3 but I am trying to get the whole device mount points set up in Cygwin and I'm having trouble because when I extract everything and open up the recovery.fstab file with notepad ++ it does not show anything but 0p1 nothing for system, boot & data so I'm lost and need help
I saw Chahk post and it is helpful this is where I'm at right now read above. I did pm Chahk and a few others for help. I will work on it a little later this weekend
Sent from my GT-I9505G using Tapatalk 2
Click to expand...
Click to collapse
Sent from my GT-I9505G using Tapatalk 2

irishrally said:
Chahk's post about mount points and getting other CM/AOSP ROMs working on I9505G deserves its own link:
http://forum.xda-developers.com/showpost.php?p=43843048&postcount=30
Click to expand...
Click to collapse
x2
I've found that very useful. Been able to get every AOSP/CM based ROM to boot by editing the updater-script to match the correct partition.
Has anybody noticed that photos taken with the front facing camera on CM sometimes have green distortion? That was the only bug I've found. Unfortunately, that flared up my phone OCD enough to go back to the 4.3 leak.
Thanks for putting this thread together, OP!

illogic6 said:
x2
I've found that very useful. Been able to get every AOSP/CM based ROM to boot by editing the updater-script to match the correct partition.
Has anybody noticed that photos taken with the front facing camera on CM sometimes have green distortion? That was the only bug I've found. Unfortunately, that flared up my phone OCD enough to go back to the 4.3 leak.
Thanks for putting this thread together, OP!
Click to expand...
Click to collapse
Your Welcome. So I read on the other thread and I know myself and others are looking at how we can port other ROMs specifically touchwiz over to the G the partition as you know is an issue but I think with collaboration can be solved soon.
Keep it coming let's solve problems!
Sent from my GT-I9505G using Tapatalk 2

MJHawaii said:
Your Welcome. So I read on the other thread and I know myself and others are looking at how we can port other ROMs specifically touchwiz over to the G the partition as you know is an issue but I think with collaboration can be solved soon.
Keep it coming let's solve problems!
Sent from my GT-I9505G using Tapatalk 2
Click to expand...
Click to collapse
I took a TW ROM and edited the script for our devices. It boots, but the display never kicks on. You get the boot animation sound and it even mounts the storage on my computer.

illogic6 said:
I took a TW ROM and edited the script for our devices. It boots, but the display never kicks on. You get the boot animation sound and it even mounts the storage on my computer.
Click to expand...
Click to collapse
Wow that's great maybe you can help me with my script it sounds like your further along than some. I wonder what would cause the display bug doesn't sound like a boot issue
Sent from my GT-I9505G using Tapatalk 2

MJHawaii said:
Wow that's great maybe you can help me with my script it sounds like your further along than some. I wonder what would cause the display bug doesn't sound like a boot issue
Sent from my GT-I9505G using Tapatalk 2
Click to expand...
Click to collapse
Here's the ROM I was messing with. I used the "old firmware" because it was the newest one when I first looked. http://forum.xda-developers.com/showthread.php?t=2349369
I've attached my modded updater script. (You will have to remove the .txt extension. Wouldn't let me upload without it.) All I had to do was edit which /dev/block the script mounts before it copies stuff over. If I recall correctly, I only had to change the dev it flashes the boot.img to. See this post: http://forum.xda-developers.com/showpost.php?p=43843048&postcount=30
include 'standard_disclaimer.php';

illogic6 said:
Has anybody noticed that photos taken with the front facing camera on CM sometimes have green distortion?
Click to expand...
Click to collapse
I think this might be fixed in the newest CM nightly. I've took about 20 selfies with the front facing camera and haven't had distortion at all. Before I'd get it every 3 or 4 photos.
Edit: Disregard the above. The problem is back, but I'm thinking it might be the 4.3 camera zip I've been using. Hmmmmmmm......

I think I jumped the gun a bit on rooting my I9505G right when I got it. I've never successfully rooted it, but I managed to get on the 4.3 ROM with a few quirks here and there. My ultimate goal is to get Paranoid Android with halo running, but I'll have to dedicate a day to the whole process. I'll be keeping track of this thread.

illogic6 said:
Here's the ROM I was messing with. I used the "old firmware" because it was the newest one when I first looked. http://forum.xda-developers.com/showthread.php?t=2349369
I've attached my modded updater script. (You will have to remove the .txt extension. Wouldn't let me upload without it.) All I had to do was edit which /dev/block the script mounts before it copies stuff over. If I recall correctly, I only had to change the dev it flashes the boot.img to. See this post: http://forum.xda-developers.com/showpost.php?p=43843048&postcount=30
include 'standard_disclaimer.php';
Click to expand...
Click to collapse
Thanks a lot I will take a look tomorrow and see what I can do
Sent from my GT-I9505G using Tapatalk 2

illogic6 said:
Here's the ROM I was messing with. I used the "old firmware" because it was the newest one when I first looked. http://forum.xda-developers.com/showthread.php?t=2349369
I've attached my modded updater script. (You will have to remove the .txt extension. Wouldn't let me upload without it.) All I had to do was edit which /dev/block the script mounts before it copies stuff over. If I recall correctly, I only had to change the dev it flashes the boot.img to. See this post: http://forum.xda-developers.com/showpost.php?p=43843048&postcount=30
include 'standard_disclaimer.php';
Click to expand...
Click to collapse
Great work Illogic I wonder why TW will not display I tried as well but I did not get as far as you mine fails during the installation.
Also did you see my post on getting Cygwin to set device mount points that in itself will speed things up
Sent from my GT-I9505G using Tapatalk 2

MJHawaii said:
Great work Illogic I wonder why TW will not display I tried as well but I did not get as far as you mine fails during the installation.
Also did you see my post on getting Cygwin to set device mount points that in itself will speed things up
Sent from my GT-I9505G using Tapatalk 2
Click to expand...
Click to collapse
I haven't used Cygwin before. I'll take a look at it today.
Also going to mess around with TW a little more. Maybe we just need some libs from the stock 9505g rom or something.
Update: I'm afraid I may have mislead you earlier. It appears that you need more than just the updated update-script in order to get touchwiz to boot. You also need a kernel from one of the 4.3 leaks. Here's the one I've been using. (Attached) Not only does it boot, but the soft keys work and you can hear the sound effects of the lock screen. I'm very close.

illogic6 said:
I haven't used Cygwin before. I'll take a look at it today.
Also going to mess around with TW a little more. Maybe we just need some libs from the stock 9505g rom or something.
Update: I'm afraid I may have mislead you earlier. It appears that you need more than just the updated update-script in order to get touchwiz to boot. You also need a kernel from one of the 4.3 leaks. Here's the one I've been using. (Attached) Not only does it boot, but the soft keys work and you can hear the sound effects of the lock screen. I'm very close.
Click to expand...
Click to collapse
Wow Illogic your close bro thanks for your hard work the libs does sound like it would cause the display problem I'm gonna play around with this too. All I did was unpack stock 4.3 and zip and deo the files with root. The problem I am having is that I am still learning U-scripts and so I cannot get anything to flash. I get failed on 0p21 even though its changed. Maybe I can pm you what I did later and get your feedback cuz your miles ahead of me
Sent from my GT-I9505G using Tapatalk 2

I've merged libs from the leaked 4.3 build into the TW ROM without overwriting anything. Didn't seem to change anything. At this point, I'm playing with magic I don't understand so not sure how much farther I'm going to get.
Would really like figure out which files in the system are responsible for the display. Perhaps we need to overwrite those files. Google is failing me so far.
---------- Post added at 04:45 PM ---------- Previous post was at 04:29 PM ----------
Tada! :victory:
The error message goes away. Right now, the web browser force closes... that might be because of the ROM I was modifying. What I did was use the 4.2.2 kernel that shipped with the google play phones. That booted AND activated the display.
http://i.imgur.com/HZaraPK.jpg

[Need Help] Porting CyanogenMod 13 for SM-G530H

Hi Guys,
I actually tried to port CyanogenMod 13 from my Samsung Galaxy Tab 2.
Here is some info about this device - http://www.gsmarena.com/samsung_galaxy_tab_2_7_0_p3100-4543.php
Why I choose Galaxy Tab 2? Cause that is the only device i have that has CyanogenMod 13. If there is something wrong please let me know.
Now here is the problem. I modified the System folder. but now i cant switch it into system.new.dat . I tried every single program but no use.
So if anyone can help me converting it into system.new.dat. if anyone can i will upload the files in Drive so let me know.

@tasnim_tamim I'm not breaking your heart but it'll not work.
Completely different processors nd kernel versions.
Try porting from a device which has same processor, Snapdragon 410.
Examples: Lenovo A6000, Samsung J5, Moto g(3rd gen), HTC Desire 510, Samsung A3, Samsung A5 & Many more.
Happy porting! I told you all the devices I knew about by my researches so far.

Has.007 said:
@tasnim_tamim I'm not breaking your heart but it'll not work.
Completely different processors nd kernel versions.
Try porting from a device which has same processor, Snapdragon 410.
Examples: Lenovo A6000, Samsung J5, Moto g(3rd gen), HTC Desire 510, Samsung A3, Samsung A5 & Many more.
Happy porting! I told you all the devices I knew about by my researches so far.
Click to expand...
Click to collapse
No problem. I'll try that. Its my first time I am porting a ROM. So I am a noob at these stuff. But anyway thanks for letting me know about that.

Has.007 said:
@tasnim_tamim I'm not breaking your heart but it'll not work.
Completely different processors nd kernel versions.
Try porting from a device which has same processor, Snapdragon 410.
Examples: Lenovo A6000, Samsung J5, Moto g(3rd gen), HTC Desire 510, Samsung A3, Samsung A5 & Many more.
Happy porting! I told you all the devices I knew about by my researches so far.
Click to expand...
Click to collapse
But the thing I'll like to know from you is how you repack system_ or system.img to system. new.DAT??

@tasnim_tamim You're welcome. You'll need Linux for that.

Has.007 said:
@tasnim_tamim You're welcome. You'll need Linux for that.
Click to expand...
Click to collapse
I have Ubuntu 14.04 dualbooted on my system.
And BTW I have selected a ROM from Moto g 3rd gen 2015 which is CM13. ... I am extremely interested in porting ROM.

tasnim_tamim said:
I have Ubuntu 14.04 dualbooted on my system.
And BTW I have selected a ROM from Moto g 3rd gen 2015 which is CM13. ... I am extremely interested in porting ROM.
Click to expand...
Click to collapse
Here you go open the thread nd you can find what you need to know.
http://forum.xda-developers.com/che...arshmallow-t3283452/post64587718#post64587718
Actually I'm not sure if the Cm13 ROMs will work yet, until @zim555 or any other developer builds a Cm13 kernel.
You can try porting but if you're not successful you should go for 5.0 or 5.1.1 ROMs.

Has.007 said:
Here you go open the thread nd you can find what you need to know.
http://forum.xda-developers.com/che...arshmallow-t3283452/post64587718#post64587718
Actually I'm not sure if the Cm13 ROMs will work yet, until @zim555 or any other developer builds a Cm13 kernel.
You can try porting but if you're not successful you should go for 5.0 or 5.1.1 ROMs.
Click to expand...
Click to collapse
Thanks dude for the link.
I am sure I will stuck in a boot loop because I don't have a kernel. So my expectations are wait for @zim555. If cm13 fails I'll try 5.1.1 dirty unicorn

tasnim_tamim said:
Thanks dude for the link.
I am sure I will stuck in a boot loop because I don't have a kernel. So my expectations are wait for @zim555. If cm13 fails I'll try 5.1.1 dirty unicorn
Click to expand...
Click to collapse
Press the thanks instead.
Yup that's the problem, Zim is actually trying to patch the Cm13 kernel to make it work so I'm sure soon he'll start that project maybe in some days.
Best of luck go for Dirty Unicorns.

Has.007 said:
Press the thanks instead.
Yup that's the problem, Zim is actually trying to patch the Cm13 kernel to make it work so I'm sure soon he'll start that project maybe in some days.
Best of luck go for Dirty Unicorns.
Click to expand...
Click to collapse
Okay, I tried porting 5.1.1 OmniRom using the link you gave me. now i followed everything. everything was fine. but when i tried making system.img it dosent works. any suggestion??

tasnim_tamim said:
Okay, I tried porting 5.1.1 OmniRom using the link you gave me. now i followed everything. everything was fine. but when i tried making system.img it dosent works. any suggestion??
Click to expand...
Click to collapse
Check the name of the file you've in that folder. Change the command accordingly.

Has.007 said:
Check the name of the file you've in that folder. Change the command accordingly.
Click to expand...
Click to collapse
First of all the I already messed the conversion to system.img which after that I had to goto windows and extract the whole damn thing. So now I can't change it to system.new.dat. on my windows there is also a software for that. But that asks for something like Select system.img size. Which is what extremely confuses me. And I said earlier that I completely messed up everything on Ubuntu side that now. Now the thing on thread what it said doesn't even works. I did ported everything. But I can't compress it. If you want I can give you screenshot on windows about the program. So if you can help me with that
BTW I am porting OmniRom 5.1.1 from Moto G 2013

ZTE Nubia Z9 Mini (NX511j) - Cam driver for international Version

Hey all,
the problme is that the international version has another cam module (13mp) than the chinese version (18mp).
Therefore the custom roms , which are always based on the chinese version and cant use the camera.
Now I need some help on how to implement the driver from the original firmware:
http://rom.download.nubia.com/Germany/Z9mini/NX511J-update.zip
Into this custom rom from mokee:
http://download.mokeedev.com/?device=nx511j
My phone is already rooted and has a custom reovery. I already tried to "zip-edit" the mokee rom and copied/replaced files from the stock rom into the mokee rom , base on this info from here and here e.g.:
Libcamalgo.so
Libcameracustom.so
Libcameraclient.so
Libcameraservice.so
Libcamerametadata.so​
and
system/lib/ libcamdrv.so
system/lib/libcamalgo.so
system/lib/libcameracustom.so
system/lib/libdpframework.so
system\etc\permissions\android.hardware.camera.xml​
and then rezipped the rom and signed the zip with the autosign tool.
This "custom" rom than could even be successfuly installed with twrp without an problem, but then didnt
get beyond the mokee boot logo.
Now my question is:
Can this be due to the fact that the stock rom is 5.02 and the custom rom/mokee is 6.01 and the drivers simply cant work due to another android version?
Am I thinking way to easy with this simple "copy/paste zip editing" and something more complex like editing the kernel has to be done?
Any tip for what to do is very appreciated, as I think I have to solve it by myself due to a lack of mass-interest in this device.

Does it support Indian version?
Sent from my NX511J using XDA-Developers mobile app

Sorry for my late reply, I've been on vacation.
I dont know if it supports the indian version. My device is the EU version I guess...
It has a different camera module whith only 13mp-

Hi!
Just replacing those files can't work. The drivers for the t4k37 camera sensor aren't built in in the mokee release.
When it boots, it only polls those Sony IMX sensors. Furthermore the librarys for the t4k37 sensor arent't in the rom.
I'vre tried to build my own mokee rom, but with no luck, got only to boot animation. The device isn't supported officialy by
Mokee any longer. As I didn't build android before, my knowledge is obviously too little for this kind of task... perhaps some
more experienced guys could help...
Also it's hard to understand what is the exact difference in the chinese, indian , international an german modells of the phone, there are little informations.

Just flashed Mokee MK51.1-nx511j-160420-HISTORY.zip and moved the appropriate libraries to the flash, it seems, that the t4k37 sensor initializes and works. Sadly there's no camera app preinstalled.
Tested with Open Camera App from Playstore. I'll now try to get the original camera app.
Libraries where taken from germans stock rom in vendor folder.

kai4065 said:
Just flashed Mokee MK51.1-nx511j-160420-HISTORY.zip and moved the appropriate libraries to the flash, it seems, that the t4k37 sensor initializes and works. Sadly there's no camera app preinstalled.
Tested with Open Camera App from Playstore. I'll now try to get the original camera app.
Libraries where taken from germans stock rom in vendor folder.
Click to expand...
Click to collapse
Hi kai4065!
Can you give me more info please. Which file list I need to replace. I need to create patch for one of localized firmware. Also may be you know where I can get last de firmware? My device was flashed with NX511J_DECommon_V1.01 now but buyed with 1.02.
Thx for any help.

falkolab said:
Hi kai4065!
Can you give me more info please. Which file list I need to replace. I need to create patch for one of localized firmware. Also may be you know where I can get last de firmware? My device was flashed with NX511J_DECommon_V1.01 now but buyed with 1.02.
Thx for any help.
Click to expand...
Click to collapse
Here's the list:
# Camera
etc/firmware/cpp_firmware_v1_4_0.fw
etc/firmware/cpp_firmware_v1_2_0.fw
etc/firmware/cpp_firmware_v1_1_6.fw
etc/firmware/cpp_firmware_v1_1_1.fw
-lib/libmm-qcamera.so
-lib/libmorpho_jpeg_io.so
-lib/libmmjpeg_interface.so
-lib/libqomx_core.so
-lib/libmorpho_memory_allocator.so
-lib/libmmcamera_interface.so
-lib/libmorpho_strobe_photo_jni.so
-lib/libmorpho_image_converter.so
-lib64/libmorpho_jpeg_io.so
-lib64/libmorpho_memory_allocator.so
-lib64/libmorpho_image_converter.so
lib/hw/camera.msm8916.so
bin/mm-qcamera-daemon
bin/mm-qcamera-app
vendor/lib/libmmcamera_faceproc.so
vendor/lib/libchromatix_ov5648_p5v18g_common.so
vendor/lib/libchromatix_skuf_ov5648_p5v23c_snapshot.so
vendor/lib/libactuator_rohm_bu64297gwz.so
vendor/lib/libchromatix_t4k37_qtech_f4k37ab_preview.so
vendor/lib/libmmcamera_t4k35.so
vendor/lib/libmmcamera2_stats_modules.so
vendor/lib/libactuator_bu64291gwz.so
vendor/lib/libmmcamera2_stats_algorithm.so
vendor/lib/libjpegdhw.so
vendor/lib/libmmcamera_t4k37_qtech_f4k37ab.so
vendor/lib/libmmcamera2_c2d_module.so
vendor/lib/libmmcamera2_cpp_module.so
vendor/lib/libmmcamera2_vpe_module.so
vendor/lib/libmmcamera_ov2720.so
vendor/lib/libmmcamera_S5K4E1_13P1BA.so
vendor/lib/libchromatix_t4k35_nightmode_1.so
vendor/lib/libmmipl.so
vendor/lib/libchromatix_t4k35_common.so
vendor/lib/libchromatix_ov2720_preview.so
vendor/lib/libmmcamera_sunny_q5v22e_eeprom.so
vendor/lib/libjpegehw.so
vendor/lib/libmmcamera2_sensor_modules.so
vendor/lib/libchromatix_ov5648_q5v22e_zsl.so
vendor/lib/libchromatix_ov5648_oty5f03_common.so
vendor/lib/libmmcamera_sp1628.so
vendor/lib/libmmcamera_skuf_ov5648_p5v23c.so
vendor/lib/libmmQSM.so
vendor/lib/libactuator_bu64291gwz_t4k35.so
vendor/lib/libmmcamera_wavelet_lib.so
vendor/lib/libchromatix_t4k35_preview.so
vendor/lib/libchromatix_t4k35_hfr_120.so
vendor/lib/libmmcamera2_pproc_modules.so
vendor/lib/libmmcamera_imx132.so
vendor/lib/libmmjpeg.so
vendor/lib/libchromatix_t4k37_qtech_f4k37ab_snapshot.so
vendor/lib/libchromatix_ov5648_oty5f03_default_video.so
vendor/lib/libchromatix_t4k37_qtech_f4k37ab_nightmode.so
vendor/lib/libactuator_bu64291gwz_camcorder.so
vendor/lib/libchromatix_t4k37_qtech_f4k37ab_common.so
vendor/lib/libchromatix_t4k37_qtech_f4k37ab_default_video.so
vendor/lib/libmmcamera_tintless_algo.so
vendor/lib/libmmcamera_ov5648_oty5f03.so
vendor/lib/libchromatix_t4k37_qtech_f4k37ab_video_hd.so
vendor/lib/libactuator_bu64291gwz_camera.so
vendor/lib/libchromatix_t4k35_default_video.so
vendor/lib/libmmcamera2_wnr_module.so
vendor/lib/liboemcamera.so
vendor/lib/libactuator_bu64291gwz_t4k35_camcorder.so
vendor/lib/libchromatix_ov5648_preview.so
vendor/lib/libmmcamera_ov5648.so
vendor/lib/libmmcamera_ov5648_p5v18g.so
vendor/lib/libchromatix_ov5648_q5v22e_preview.so
vendor/lib/libchromatix_t4k35_snapshot.so
vendor/lib/libchromatix_ov5648_p5v18g_preview.so
vendor/lib/libmmcamera2_isp_modules.so
vendor/lib/libchromatix_ov5648_q5v22e_snapshot.so
vendor/lib/libmm-qdcm.so
vendor/lib/libchromatix_t4k37_qtech_f4k37ab_hfr_120.so
vendor/lib/libchromatix_t4k35_nightmode.so
vendor/lib/libmmqjpeg_codec.so
vendor/lib/libchromatix_ov5648_q5v22e_common.so
vendor/lib/libmmcamera2_imglib_modules.so
vendor/lib/libmmcamera_tintless_bg_pca_algo.so
vendor/lib/libchromatix_ov5648_p5v18g_default_video.so
vendor/lib/libchromatix_ov5648_q5v22e_default_video_hd.so
vendor/lib/libchromatix_ov5648_common.so
vendor/lib/libchromatix_ov5648_oty5f03_snapshot.so
vendor/lib/libmmcamera_imglib.so
vendor/lib/libmmcamera_hdr_gb_lib.so
vendor/lib/libchromatix_ov5648_p5v18g_default_video_hd.so
vendor/lib/libmmcamera2_frame_algorithm.so
vendor/lib/libmmcamera_hi256.so
vendor/lib/libmmcamera2_iface_modules.so
vendor/lib/libchromatix_t4k37_qtech_f4k37ab_liveshot.so
vendor/lib/libchromatix_skuf_ov5648_p5v23c_common.so
vendor/lib/libchromatix_ov5648_default_video.so
vendor/lib/libchromatix_skuf_ov5648_p5v23c_default_video.so
vendor/lib/libchromatix_ov5648_p5v18g_zsl.so
vendor/lib/libqomx_jpegdec.so
vendor/lib/libchromatix_ov5648_snapshot.so
vendor/lib/libchromatix_ov5648_oty5f03_preview.so
vendor/lib/libmmcamera_hdr_lib.so
vendor/lib/libmmcamera_ov5648_q5v22e.so
vendor/lib/libactuator_bu64291gwz_t4k35_camera.so
vendor/lib/libchromatix_ov5648_oty5f03_zsl.so
vendor/lib/libchromatix_t4k37_qtech_f4k37ab_pre4zsl.so
vendor/lib/libchromatix_ov5648_zsl.so
vendor/lib/libqomx_jpegenc.so
vendor/lib/libchromatix_ov5648_q5v22e_default_video.so
vendor/lib/libmmcamera_ov5645.so
vendor/lib/libchromatix_t4k37_qtech_f4k37ab_nightmode_1.so
vendor/lib/libmmcamera2_is.so
vendor/lib64/libmmcamera2_stats_algorithm.so
vendor/lib64/libchromatix_imx214_hfr_60fps.so
vendor/lib64/libchromatix_imx219_q8n13a_common.so
vendor/lib64/libactuator_rohm_bu64297gwz_camcorder.so
vendor/lib64/libchromatix_imx214_default_video_4k.so
vendor/lib64/libchromatix_imx214_nightmode_1.so
vendor/lib64/libchromatix_imx219_q8n13a_default_video.so
vendor/lib64/libchromatix_imx219_q8n13a_liveshot.so
vendor/lib64/libchromatix_ov8858_q8v19w_common.so
vendor/lib64/libchromatix_imx234_liveshot.so
vendor/lib64/libchromatix_imx219_q8n13a_snapshot.so
vendor/lib64/libchromatix_imx234_hfr_120.so
vendor/lib64/libchromatix_ov16825_common.so
vendor/lib64/libchromatix_imx214_snapshot.so
vendor/lib64/libchromatix_imx234_snapshot_nightmode_1.so
vendor/lib64/libchromatix_imx214_liveshot.so
vendor/lib64/libchromatix_ov8858_snapshot.so
vendor/lib64/libchromatix_imx234_snapshot_nightmode.so
vendor/lib64/libchromatix_ov8858_liveshot.so
vendor/lib64/libchromatix_imx179_preview.so
vendor/lib64/libchromatix_ov8858_hfr_60fps.so
vendor/lib64/libchromatix_imx234_common.so
vendor/lib64/libchromatix_ov8858_q8v19w_snapshot.so
vendor/lib64/libchromatix_ov13850_default_video.so
vendor/lib64/libchromatix_imx219_q8n13a_preview.so
vendor/lib64/libchromatix_imx234_default_video.so
vendor/lib64/libmmcamera2_frame_algorithm.so
Probably not all files are necessary, but i was too lazy to test it out one by one. I just replaced all of them. The libs for the imx sensor probably aren't needed.
Latest german rom is V1.01, as far as I know. Never ever seen a german localized V1.02. Files above were taken from 1.01.
Just works for 5.1, as in Mokee 60.1 there's some sort of timeout when it tries to initialize the driver. Some patching would be needed, but trying to build Mokee myself
didn't resume a working ROM.

kai4065 said:
Here's the list
Click to expand...
Click to collapse
Thank you! I'll try. :good:

Just wanted to let you know,that I was sick of copying the files in every new release, so I just swapped the main camera sensor with the Sony sensor found in the Chinese model. Works like a charm.

Stock Binaries for Phab 2

Here are the original stock ROMs for the Phab 2. I have been trying to use the recovery and boot images to get a TWRP recovery built but have been unsuccessful thus far. I'm thinking of moving my efforts off of my Win10 VM to see if I have better luck on a physical machine.
Anyway, here's to getting root on this device.
XDA:DevDB Information
Stock Binaries for Phab 2, ROM for the Lenovo Phab 2
Contributors
Synman, Synman
ROM OS Version: 2.3.x Gingerbread
Version Information
Status: Testing
Created 2016-12-18
Last Updated 2016-12-17

got phb 2 today
Good luck.

I have found another set of binaries that I will be uploading shortly. These come from the russian lenovo site and appear to be very legit, as well as the SPF Tool that is included.

Synman said:
I have found another set of binaries that I will be uploading shortly. These come from the russian lenovo site and appear to be very legit, as well as the SPF Tool that is included.
Click to expand...
Click to collapse
http://forum.xda-developers.com/phab-2/how-to/how-to-root-phab-2-pb2-650y-t3524305. this site has the root method if you were looking to root.

Anyone get voLTE to work on this phone (PB2-650Y)?

Stock Recovery
Can you please give me the stock recovery for the phab 2 from that please? Any help would be greatly appreciated.

Help Firmware LENOVO PB2-650Y MT8735!!
please help with firmware LENOVO PB2-650Y MT8735!!

Binaries MT6735
Synman said:
I have found another set of binaries that I will be uploading shortly. These come from the russian lenovo site and appear to be very legit, as well as the SPF Tool that is included.
Click to expand...
Click to collapse
Bro this binaries when put them on flash tool, says MT8735 (this mean is for the 650M (plus version)). do you have the correct binaries for the 650y (MT6735)? please share the link Bro.
Thank you for your help from now....

Accidently messed up the system, boot and recovery partitions...
Downloaded a zip of the stock rom, but having trouble with s p flash tool. Anyone successfully reflash the Phab 2 with stock?

[SM-T700] [KLIMTWIFI] All-in-one mirror of files for the Galaxy Tab S 8.4 Wi-Fi

Hey there interweb!
This thread is meant as a general area to organise the mess of files scattered across the internet for the original Wi-Fi version of the Samsung Galaxy Tab S 8.4.
This Google Drive folder contains the following:
Stock Odin TAR/MD5 firmware files
ROMs, and their accompanying files + install instructions that have been confirmed to boot,
Kernels that have been confirmed to boot,
Useful mods which are confirmed to work and add genuine capability to your device;
and anything else which I think is useful to those wishing to mod their Tab S.
Link:
androiddev - Google Drive
drive.google.com
If you know of any files which you think should be included, and are not already here, please feel free to either reply to this thread or DM me. If you want any assistance at all, please feel free to do the same, and I will try to assist you to the best of my ability.
All the best,
Cessna
I must reiterate, as always, that although I have tested each of these mods, I am not responsible for bricks, loss of data, or permanent damage to your device. You yourself are choosing to make these modifications, and although they have my quality assurance, I can not guarantee their 100% safety. Just because they worked on my device, does not necessarily mean they will work on yours.

CessnaBroon said:
Hey there interweb!
This thread is meant as a general area to organise the mess of files scattered across the internet for the original Wi-Fi version of the Samsung Galaxy Tab S 8.4.
This Google Drive folder contains the following:
Stock Odin TAR/MD5 firmware files
ROMs, and their accompanying files + install instructions that have been confirmed to boot,
Kernels that have been confirmed to boot,
Useful mods which are confirmed to work and add genuine capability to your device;
and anything else which I think is useful to those wishing to mod their Tab S.
Link:
klimtwifi - Google Drive
drive.google.com
If you know of any files which you think should be included, and are not already here, please feel free to either reply to this thread or DM me. If you want any assistance at all, please feel free to do the same, and I will try to assist you to the best of my ability.
All the best,
Cessna
I must reiterate, as always, that although I have tested each of these mods, I am not responsible for bricks, loss of data, or permanent damage to your device. You yourself are choosing to make these modifications, and although they have my quality assurance, I can not guarantee their 100% safety. Just because they worked on my device, does not necessarily mean they will work on yours.
Click to expand...
Click to collapse
Good idea to gather everything on one place and make the mess a bit easier to handle..
I helped myself with the TWRP and the LOS17, much obliged. Don't really need help otherwise.
That is, unless you know why my t705 (i have one of those too) keeps messing with me and losing charge even when switched off...

prkfsz said:
Good idea to gather everything on one place and make the mess a bit easier to handle..
I helped myself with the TWRP and the LOS17, much obliged. Don't really need help otherwise.
That is, unless you know why my t705 (i have one of those too) keeps messing with me and losing charge even when switched off...
Click to expand...
Click to collapse
I'll be honest, my Tab s battery has decreased to about 2100 mAh from 4900 so it's probably just age I'm afraid. If you use it more, you could do a battery transplant, but I don't have ROMs for klimtlte. Thanks for using my mirror

CessnaBroon said:
I'll be honest, my Tab s battery has decreased to about 2100 mAh from 4900 so it's probably just age I'm afraid. If you use it more, you could do a battery transplant, but I don't have ROMs for klimtlte. Thanks for using my mirror
Click to expand...
Click to collapse
Not battery. Changed it. And the same battery works fine on T700 and does not lose charge when off. Tried flashing other ROM as well, but i can't find solution.

prkfsz said:
Not battery. Changed it. And the same battery works fine on T700 and does not lose charge when off. Tried flashing other ROM as well, but i can't find solution.
Click to expand...
Click to collapse
That's odd. Have you tried flashing a custom kernel in TWRP? If not, I'll upload one to the Google Drive in the /androiddev/klimtlte folder. Will create it soon, along with instructions.

CessnaBroon said:
That's odd. Have you tried flashing a custom kernel in TWRP? If not, I'll upload one to the Google Drive in the /androiddev/klimtlte folder. Will create it soon, along with instructions.
Click to expand...
Click to collapse
Odd indeed. And really frustrating. :-/
Have not tried with custom kernel but can of course do that, if it's simple. But, like i said - it's a T705, you mean there is one already made or are you just going to make one on a coffee break?

prkfsz said:
Odd indeed. And really frustrating. :-/
Have not tried with custom kernel but can of course do that, if it's simple. But, like i said - it's a T705, you mean there is one already made or are you just going to make one on a coffee break?
Click to expand...
Click to collapse
There's one already made I think. I'll see if I can find one and alert you when it's up. Obvs I can't do a check for safety without the hardware so make a full backup of the boot partition just in case. I'll make sure to find one with good reviews

CessnaBroon said:
There's one already made I think. I'll see if I can find one and alert you when it's up. Obvs I can't do a check for safety without the hardware so make a full backup of the boot partition just in case. I'll make sure to find one with good reviews
Click to expand...
Click to collapse
Not sure if i have the time to do it tonight or this weekend, but i will try as soon as i get the chance.
Very gratefull for all the help. I actually have two of them, with the same behaviour and i almost written them off, so..

prkfsz said:
Not sure if i have the time to do it tonight or this weekend, but i will try as soon as i get the chance.
Very gratefull for all the help. I actually have two of them, with the same behaviour and i almost written them off, so..
Click to expand...
Click to collapse
kernel - Google Drive
drive.google.com
Shouldn't take more than 5 minutes. Good luck!

CessnaBroon said:
kernel - Google Drive
drive.google.com
Shouldn't take more than 5 minutes. Good luck!
Click to expand...
Click to collapse
Thank you kindly, sir.
Will try right away, but can't really see if had any effect untill morning.
I thought first to ask you if it is possible to use this on stock too, but then it struck me how stupid idea that is, since it's not the same Android version. Because one of them is on stock and behaving the same way. Which basically leads me to believe that it actually is a hardware fault...

prkfsz said:
Thank you kindly, sir.
Will try right away, but can't really see if had any effect untill morning.
I thought first to ask you if it is possible to use this on stock too, but then it struck me how stupid idea that is, since it's not the same Android version. Because one of them is on stock and behaving the same way. Which basically leads me to believe that it actually is a hardware fault...
Click to expand...
Click to collapse
This should work on stock marshmallow too. I will give it a go and get back to you.

Thank you kindly!

lafinjack said:
Thank you kindly!
Click to expand...
Click to collapse
You're very welcome!

CessnaBroon said:
This should work on stock marshmallow too. I will give it a go and get back to you.
Click to expand...
Click to collapse
Sorry for delay in answering..
Unfortunatelly the error is still present. Like i said, probably a software issue.
Bit thanx anuway!

Thanks for creating a section specifically for the SM-T700! I hope that I can get some practical help on moving forward
On my post here (https://forum.xda-developers.com/t/...d-but-ok-with-resurrection-remix-why.4332701/) I describe my attempt to install a variation of LineageOS 17.1 on my device -- always running into 'E1001'. I eventually settled on an older Resurrection Remix, since someone mentioned that it would ultimately make it possible to move to LineageOS (I have not tried that yet).
Here are some of my questions:
1) In a much larger/older thread (https://forum.xda-developers.com/t/...t700-sm-t705-sm-t800-sm-t800-sm-p600.4270943/) the first step is "Flash latest official Samsung Firmware with ODIN". Is this even relevant to me?
2) In preparation for successfully installing LineageOS, what TWRP clearing/formatting options should I be using? On a completely different device, the instructions were to delete *everything*. Could my wrong choices when doing this for my SM-T700 have contributed to my failures?
3) Now that I (currently) have Resurrection Remix on my SM-T700, can I expect -- with the binaries mentioned in this new subgroup -- to be able to install LineageOS 17.1 *without* running into the 'E1001' problem?
Thanks for any help!

darethehair said:
Thanks for creating a section specifically for the SM-T700! I hope that I can get some practical help on moving forward
On my post here (https://forum.xda-developers.com/t/...d-but-ok-with-resurrection-remix-why.4332701/) I describe my attempt to install a variation of LineageOS 17.1 on my device -- always running into 'E1001'. I eventually settled on an older Resurrection Remix, since someone mentioned that it would ultimately make it possible to move to LineageOS (I have not tried that yet).
Here are some of my questions:
1) In a much larger/older thread (https://forum.xda-developers.com/t/...t700-sm-t705-sm-t800-sm-t800-sm-p600.4270943/) the first step is "Flash latest official Samsung Firmware with ODIN". Is this even relevant to me?
2) In preparation for successfully installing LineageOS, what TWRP clearing/formatting options should I be using? On a completely different device, the instructions were to delete *everything*. Could my wrong choices when doing this for my SM-T700 have contributed to my failures?
3) Now that I (currently) have Resurrection Remix on my SM-T700, can I expect -- with the binaries mentioned in this new subgroup -- to be able to install LineageOS 17.1 *without* running into the 'E1001' problem?
Thanks for any help!
Click to expand...
Click to collapse
Hey there! I'll take a closer look once I'm home. Speak to you then

darethehair said:
Thanks for creating a section specifically for the SM-T700! I hope that I can get some practical help on moving forward
On my post here (https://forum.xda-developers.com/t/...d-but-ok-with-resurrection-remix-why.4332701/) I describe my attempt to install a variation of LineageOS 17.1 on my device -- always running into 'E1001'. I eventually settled on an older Resurrection Remix, since someone mentioned that it would ultimately make it possible to move to LineageOS (I have not tried that yet).
Here are some of my questions:
1) In a much larger/older thread (https://forum.xda-developers.com/t/...t700-sm-t705-sm-t800-sm-t800-sm-p600.4270943/) the first step is "Flash latest official Samsung Firmware with ODIN". Is this even relevant to me?
2) In preparation for successfully installing LineageOS, what TWRP clearing/formatting options should I be using? On a completely different device, the instructions were to delete *everything*. Could my wrong choices when doing this for my SM-T700 have contributed to my failures?
3) Now that I (currently) have Resurrection Remix on my SM-T700, can I expect -- with the binaries mentioned in this new subgroup -- to be able to install LineageOS 17.1 *without* running into the 'E1001' problem?
Thanks for any help!
Click to expand...
Click to collapse
Hey! Sorry for the delay. You should flash the latest firmware (it's on updato.com) Using Odin, and then twrp with Odin, and then the custom ROM from twrp, wiping data dalvik and cache before rebooting. Other two are in the mirror.

CessnaBroon said:
Hey! Sorry for the delay. You should flash the latest firmware (it's on updato.com) Using Odin, and then twrp with Odin, and then the custom ROM from twrp, wiping data dalvik and cache before rebooting. Other two are in the mirror.
Click to expand...
Click to collapse
Just an FYI...I was reluctant to start everything over again with Odin and latest Samsung firmware, so I opted to take a chance and merely 'adb push' the LineageOS and GApps that you have on your Google drive (along with some cache erasures as you suggested) and everything seemed to upgrade properly from Resurrection Remix to LineageOS 17.1
A few minor problems so far: camera doesn't work, and initial signon to the tablet with a PIN doesn't work so well (seems to take multiple attempts). In any case, now running Android 10!

These were issues that I faced too - I never found a way to fix them. Neither did the original Dev, but apparently updating to the latest webview fixes chrome crashes. PIN you need to wait 30seconds after boot. Camera works only with clean install and even then sometimes doesn't work.
Hope this helps,
Cessna

I was trying to install TWRP but after reboot when I go to the Recovery mode there is no TWRP. I installed the LOS on my Tab Pro 8.4 and wanted to install LOS on Tab S 8.4 but can't flash the TWRP. Any ideas what I'm doing wrong?
Thanks