Related
I have been using "fastboot boot recovery.img" to load into TWRP after OTA updates to load SuperSU as I am only rooted using the stock ROM. However, after this recent update (2.16.651.4) that includes the WiFi Calling and Android 4.4.3, when I run the command it just causes the phone to reboot. It does not reboot into TWRP, which is my recovery.img file.
I found a Nexus thread talking about having to add a kernel command line for the Nexus after a certain version of hboot, so I am not sure if it is related.
Does anyone know how to fastboot boot now with the latest update? I would like to avoid replacing my stock recovery with TWRP and just continue to boot into it. Alternatively, is there any other way to install supersu?
Thank you,
Ben
ReproOne said:
I have been using "fastboot boot recovery.img" to load into TWRP after OTA updates to load SuperSU as I am only rooted using the stock ROM. However, after this recent update (2.16.651.4) that includes the WiFi Calling and Android 4.4.3, when I run the command it just causes the phone to reboot. It does not reboot into TWRP, which is my recovery.img file.
I found a Nexus thread talking about having to add a kernel command line for the Nexus after a certain version of hboot, so I am not sure if it is related.
Does anyone know how to fastboot boot now with the latest update? I would like to avoid replacing my stock recovery with TWRP and just continue to boot into it. Alternatively, is there any other way to install supersu?
Thank you,
Ben
Click to expand...
Click to collapse
As a quick work around flash twrp onto the device, once done with it then flash the factory recovery back, Also check to make sure your bootloader didn't relock after update.
stock recovery from the update.
nfinitefx45 said:
As a quick work around flash twrp onto the device, once done with it then flash the factory recovery back, Also check to make sure your bootloader didn't relock after update.
stock recovery from the update.
Click to expand...
Click to collapse
Thank you for the reply. I thought about taking that approach, but I was really hoping someone would have an answer on why the procedure wasn't working now. My bootloader is still unlocked.
I found this as an approach someone did on the Nexus 4 for a similar issue:
fastboot -c "lge.kcal=0|0|0|x" boot customrecovery.img
Thoughts?
nfinitefx45:
I did just now flash TWRP into recovery, loaded SuperSU, and then flashed your recovery.img back to the phone. So thank you very much for the recovery.img.
I'd still like to know if fastboot boot can still work, and also if there is a way in the future I can get my own recovery.img (possibly back it up before taking an OTA)?
ReproOne said:
nfinitefx45:
I did just now flash TWRP into recovery, loaded SuperSU, and then flashed your recovery.img back to the phone. So thank you very much for the recovery.img.
I'd still like to know if fastboot boot can still work, and also if there is a way in the future I can get my own recovery.img (possibly back it up before taking an OTA)?
Click to expand...
Click to collapse
not sure about the fastboot issue, but to backup your recovery any time just go to adb and type the following
adb shell
su
dd if=/dev/block/mmcblk0p43 of=/sdcard2/recovery.img
this will copy your recovery to the external sdcard
Thank you for those steps. I do not have an external SD card installed, so I modified it to store the recovery.img on sdcard instead.
Now I can always fastboot flash twrp and then back to stock recovery.
Thank you again!
nfinitefx45 said:
not sure about the fastboot issue, but to backup your recovery any time just go to adb and type the following
adb shell
su
dd if=/dev/block/mmcblk0p43 of=/sdcard2/recovery.img
this will copy your recovery to the external sdcard
Click to expand...
Click to collapse
You would need root to do this. Not being able to use "fastboot boot" you would just be backing up the flashed recovery. Possibly towel root temp root, but I would assume it has been patched in newest update.
So I am S-On with a non-HK M8
I was on stock rooted 4.4.2 and I flashed the stock recovery and took the OTA
Now I am on 4.4.3 and still have SuperSU installed (not rooted)
Everything is working fine, but when I try to boot to recovery i get the red triangle with the !
Any suggestions?
neudof said:
So I am S-On with a non-HK M8
I was on stock rooted 4.4.2 and I flashed the stock recovery and took the OTA
Now I am on 4.4.3 and still have SuperSU installed (not rooted)
Everything is working fine, but when I try to boot to recovery i get the red triangle with the !
Any suggestions?
Click to expand...
Click to collapse
That's the stock recovery. Did you ever flash a custom recovery back on after the OTA?
xPhantom said:
That's the stock recovery. Did you ever flash a custom recovery back on after the OTA?
Click to expand...
Click to collapse
I am s-on & unlocked but i was able to flash the stock recovery from sd card to take the ota.
Is it possible to flash twrp back in the same way?
neudof said:
I am s-on & unlocked but i was able to flash the stock recovery from sd card to take the ota.
Is it possible to flash twrp back in the same way?
Click to expand...
Click to collapse
Yes, after the OTA, just flash TWRP back through fastboot and then re-flash SuperSU to get root back.
nfinitefx45 said:
As a quick work around flash twrp onto the device, once done with it then flash the factory recovery back, Also check to make sure your bootloader didn't relock after update.
stock recovery from the update.
Click to expand...
Click to collapse
I just applied the update released today, and I tried to save the recovery.img file before flashing TWRP. However, it kept giving me permission denied. Do you have the recovery.img file from the update released today so I can use it for the next update?
fastboot not working
please any help on how to access fastboot on HTC one m8.
its showing black screen n fastboot mode...
wot can I do 2 annul d problem
rooting problem
hey i am using htc one m8, i unlocked the bootloader and the device reads as
device status modified
*unlocked*
s-on
after this i flashed twrp and cwm a couple of times but its not loading on the device but shows success in the command window, however after clicking on recovery the custom recovery does not show up, and it reboots back into the fastboot mode.
please help me
thank you
jinal shah said:
hey i am using htc one m8, i unlocked the bootloader and the device reads as
device status modified
*unlocked*
s-on
after this i flashed twrp and cwm a couple of times but its not loading on the device but shows success in the command window, however after clicking on recovery the custom recovery does not show up, and it reboots back into the fastboot mode.
please help me
thank you
Click to expand...
Click to collapse
What's the output in the terminal when you fastboot flash recovery?
rooting problem
It doesn't show any error as such.
In the command window it shows successful.
But when I click on recovery it reboots back to fast boot.
Like for a second it shows the screen which reads 'this build is only for developers'
But then instead of opening Twrp it reboots back to fast boot.
I got a NExus 7 wifi 2012 that was running 5.0. It was rooted, and used TWRP.
I got info about the updated and pressed install. Booted in to TWRP and nothing happened. I then pressed install in TWRP and in cache found the .zip and tried to install. Got an error.
I then booted in to android again, and flashed the stock recovery 5.0.2 (I guess it's like the stock 5.0?) and later I tried the OTA install again. Got an error.
I then read about the new "feature" in 5.0 about not allowing OTA if rooted, and I then in SuperSU completely uninstall the root and rebooted.
Later when I got the OTA update again, I thought it should work, but I still got the error.
What can I do? Right now I'm on a MAC. Can I in some way flash only the good stuff from the factory image, and in some way NOT have to factory reset the Nexus 7?
/Söder
Even when you unroot, your file system is tampered. Only way to update is using factory images.
I think you can flash the factory image without user data to prevent factory reset.
theliquid said:
Even when you unroot, your file system is tampered. Only way to update is using factory images.
I think you can flash the factory image without user data to prevent factory reset.
Click to expand...
Click to collapse
How is it I do that then? What files from the factory images (unpacked) is it that I need to flash? Is it fastboot or ADB I use to flash?
/Söder
soder said:
How is it I do that then? What files from the factory images (unpacked) is it that I need to flash? Is it fastboot or ADB I use to flash?
/Söder
Click to expand...
Click to collapse
I have done this with my rooted N5 and N7. You need to re-flash system.
Unpack the 5.0 factory image and
fastboot flash system system.img
goraps said:
I have done this with my rooted N5 and N7. You need to re-flash system.
Unpack the 5.0 factory image and
fastboot flash system system.img
Click to expand...
Click to collapse
I managed to do this now to. My biggest problem is now to root the device again. I've switched back to stock recovery, before I removes root, when I was trying to apply the ota.
Now when I try to flash twrp recovery, I get an error about the size. I can flash the stock recovery though, the same way I flashed system.img and boot.img.
What can be wrong? I do I get root now again?
/Söder
/Söder
soder said:
I managed to do this now to. My biggest problem is now to root the device again. I've switched back to stock recovery, before I removes root, when I was trying to apply the ota.
Now when I try to flash twrp recovery, I get an error about the size. I can flash the stock recovery though, the same way I flashed system.img and boot.img.
What can be wrong? I do I get root now again?
/Söder
/Söder
Click to expand...
Click to collapse
Are you saying you can't flash the TWRP recovery now? So are you now completely stock 5.0.2?
goraps said:
Are you saying you can't flash the TWRP recovery now? So are you now completely stock 5.0.2?
Click to expand...
Click to collapse
Yes, system, boot, recovery flashed with fastboot.
When in fastboot mode, I get error, something with size, when flashing twrp. I found a CWM recovery I could flash, but it didn't boot to recovery correctly.
The twrp file is not corrupt. Tried it again and also a different version.
/Söder
OMG. I'm so f-ing stupid. Blaming all the x-mas food.
Was trying to flash the Oneplus One recovery. Not the one for Nexus 7.
Hope it works better now...
/Söder
So I basically flashed a modem.zip file that was for 5.1 on my 4.4.4 Moto X. Yup, I'm dumb, I know.
So now I'm stuck on boot loops and I'm trying to figure out how to flash the stock firmware using Fastboot.
I can put my phone in fastboot mode but as soon as I hit recovery to go to TWRP it just boot loops so Recovery is not an option for me. Any help or useful links would help. Thanks!
EDIT: I was finally able to get into TWRP. I wiped Cache and Dalvik Cache and everything returned to normal.
If your bootloader unlocked.... You should be able to just flash the appropriate modem using fastboot. Or flash all of 5.1 via fastboot or rsd lite
Sent from my Moto X using Tapatalk
So I came from a stock lollipop Tmobile h811 non rooted
To stock MM v20i.
Ive tried flashing twrp 3.0 for cm13, and no matter what,
I get failed: (remote unknown command at the end after it sends recovery.
Its already unlocked(bootloader)
Thanks.
[email protected] said:
So I came from a stock lollipop Tmobile h811 non rooted
To stock MM v20i.
Ive tried flashing twrp 3.0 for cm13, and no matter what,
I get failed: (remote unknown command at the end after it sends recovery.
Its already unlocked(bootloader)
Thanks.
Click to expand...
Click to collapse
Type: fastboot boot (path goes here)
You can drag and drop the twrp img into the command window. This will ensure you have the correct path
[email protected] said:
So I came from a stock lollipop Tmobile h811 non rooted
To stock MM v20i.
Ive tried flashing twrp 3.0 for cm13, and no matter what,
I get failed: (remote unknown command at the end after it sends recovery.
Its already unlocked(bootloader)
Thanks.
Click to expand...
Click to collapse
Follow this instruction
http://forum.xda-developers.com/tmobile-g4/development/stock-h811-20i-images-kdz-flashable-t3308227
mingkee said:
Follow this instruction
http://forum.xda-developers.com/tmobile-g4/development/stock-h811-20i-images-kdz-flashable-t3308227
Click to expand...
Click to collapse
That link doesn't really solve the OP's issue. I have the same issue. BUT - your link did show me that I can BOOT the .img file, I can't flash the .img file. I've verified the bootloader is unlocked by the fastboot getvar command.
I'm not sure what to do next. Installing OpenGapps causes a boot loop and the only thing I can do at this point is a factory reset with the OEM recovery since in the boot loop adb is unresponsive.
joesee said:
That link doesn't really solve the OP's issue. I have the same issue. BUT - your link did show me that I can BOOT the .img file, I can't flash the .img file. I've verified the bootloader is unlocked by the fastboot getvar command.
I'm not sure what to do next. Installing OpenGapps causes a boot loop and the only thing I can do at this point is a factory reset with the OEM recovery since in the boot loop adb is unresponsive.
Click to expand...
Click to collapse
The instruction shows how to flash recovery.img with TWRP though I have no clue how to do it.
I got that error the first time I did it, it was because of a misspelling of the command.
If you already unlocked the bootloader, while in fastboot, you only type "fastboot boot" + "path to twrp img on computer" OR instead of typing out the path, you may drag and drop the file into the command window.
Once it boots to twrp, flash twrp from within the booted img. That ensures you have permanent twrp.
If you were able to unlock your bootloader, the only thing stopping you from loading twrp is improper spelling and path to the img. Almost every error I have seen is from not following the directions.
Vseprz said:
If you already unlocked the bootloader, while in fastboot, you only type "fastboot boot" + "path to twrp img on computer" OR instead of typing out the path, you may drag and drop the file into the command window.
Once it boots to twrp, flash twrp from within the booted img. That ensures you have permanent twrp.
If you were able to unlock your bootloader, the only thing stopping you from loading twrp is improper spelling and path to the img. Almost every error I have seen is from not following the directions.
Click to expand...
Click to collapse
OK, just so I understand correctly, the proper sequence of events is to use fastboot to boot TWRP (which I can do) then, once in TWRP, I can then flash the twrp .zip file, right? Does anyone know if the LG's bootloader overwrites the recovery partition upon boot (in other words, do I have to boot straight to recovery after I flash to ensure it sticks?)
Sorry for the obtuse questions, I've got a lot of experience with Samsung flashing back in the KK and LP days, but not MM.
Thanks in advance!!
joesee said:
OK, just so I understand correctly, the proper sequence of events is to use fastboot to boot TWRP (which I can do) then, once in TWRP, I can then flash the twrp .zip file, right? Does anyone know if the LG's bootloader overwrites the recovery partition upon boot (in other words, do I have to boot straight to recovery after I flash to ensure it sticks?)
Sorry for the obtuse questions, I've got a lot of experience with Samsung flashing back in the KK and LP days, but not MM.
Thanks in advance!!
Click to expand...
Click to collapse
So you have flashed 20i which overwrites twrp with the stock recovery.
You then go through the steps for unlocking the boot loader.
After the boot loader is unlocked, you may boot into twrp with the fastboot boot command.
When that boots into twrp, flash twrp from within that to have it stick.
Have a question and maybe someone can help. Me getting carried away installed twrp from external partition. Now i cannot boot into recovery. Tried flashing using flashify and twrp manager. but flashify does not install after reboot and there is no option for h811 in twrp manager. Anyway to fix this?
Sent from my LG-H811 using Tapatalk
Vseprz said:
So you have flashed 20i which overwrites twrp with the stock recovery.
You then go through the steps for unlocking the boot loader.
After the boot loader is unlocked, you may boot into twrp with the fastboot boot command.
When that boots into twrp, flash twrp from within that to have it stick.
Click to expand...
Click to collapse
Yes, that's exactly the steps I do. I've flashed 20i. I used fastboot to boot into twrp. I then "install" the twrp zip file. Says it flashes with no issues. I then reboot the phone. Still has stock recovery.
I've confirmed my bootloader is unlocked with the fastboot getvar all. I've also tried all three versions of twrp available (.1, .2 and .3) and still doesn't work. Yet twrp works fine if I boot it.
joesee said:
Yes, that's exactly the steps I do. I've flashed 20i. I used fastboot to boot into twrp. I then "install" the twrp zip file. Says it flashes with no issues. I then reboot the phone. Still has stock recovery.
I've confirmed my bootloader is unlocked with the fastboot getvar all. I've also tried all three versions of twrp available (.1, .2 and .3) and still doesn't work. Yet twrp works fine if I boot it.
Click to expand...
Click to collapse
How did you confirm you have stock recovery? Did you use adb reboot recovery? Or did you use hardware keys to boot to it? Because if you use hardware keys you still get the initial confirm factory reset. You just have to accept then it boots to twrp.
---------- Post added at 10:44 AM ---------- Previous post was at 10:22 AM ----------
99problemz said:
Have a question and maybe someone can help. Me getting carried away installed twrp from external partition. Now i cannot boot into recovery. Tried flashing using flashify and twrp manager. but flashify does not install after reboot and there is no option for h811 in twrp manager. Anyway to fix this?
Sent from my LG-H811 using Tapatalk
Click to expand...
Click to collapse
If boot loader is unlocked you should load twrp from fastboot.
Vseprz said:
How did you confirm you have stock recovery? Did you use adb reboot recovery? Or did you use hardware keys to boot to it? Because if you use hardware keys you still get the initial confirm factory reset. You just have to accept then it boots to twrp.
---------- Post added at 10:44 AM ---------- Previous post was at 10:22 AM ----------
If boot loader is unlocked you should load twrp from fastboot.
Click to expand...
Click to collapse
Hahaha now that's funny!! I bet I've been through 50 blog posts on various sites to try to figure this out. Having successfully installed Viper I didn't want to take the chance and pass that confirm wipe factory question.
I feel like a complete tool. Seriously, thank you for taking the time to respond to me!
joesee said:
Hahaha now that's funny!! I bet I've been through 50 blog posts on various sites to try to figure this out. Having successfully installed Viper I didn't want to take the chance and pass that confirm wipe factory question.
I feel like a complete tool. Seriously, thank you for taking the time to respond to me!
Click to expand...
Click to collapse
I'm glad it all worked out! :good:
finding I have to re-flash with flashify each time
using twrp-2.8.7.1, I get only the first reboot from there with hardware keys letting me into twrp after accepting the first factory reset prompt and denying the second. After that cant do it again unless I re-flash. Same thing happens if I flash it from within twrp. Can use terminal, su, boot recovery and I am in., or ADB/fatsboot Primarily worried about a soft brick condition. H-811, v1 20i stock, unlocked bootloader and rooted. DE-bloated,
Any Ideas, Thanks
jdoebean said:
using twrp-2.8.7.1, I get only the first reboot from there with hardware keys letting me into twrp after accepting the first factory reset prompt and denying the second. After that cant do it again unless I re-flash. Same thing happens if I flash it from within twrp. Can use terminal, su, boot recovery and I am in., or ADB/fatsboot Primarily worried about a soft brick condition. H-811, v1 20i stock, unlocked bootloader and rooted. DE-bloated,
Any Ideas, Thanks
Click to expand...
Click to collapse
You drop the twrp file
In fastboot folder open command prompt and flash twrp first just rename it simply to recovery.img while in the fastboot folder
Type fastboot flash recovery recovery.img
Or just fastboot flash recovery.img
Then it should boot you into twrp
Once booting into twrp flash the supersu zip in your internal sd
Once you have root and reboot all you have to do is use flashify app and download twrp from the app and flash it Twrp sticks from there.
Sent from my LGMS631 using XDA Free mobile app
I was flashing the new OTA from adb, and it failed at 70%.
Stock image, locked bootloader, not TWRP, not rooted
Now on bootup, I see nothing but the google logo.
I can reboot to bootloader/recovery mode, but can't flash anything since I hadn't unlocked the bootloader. Any way to proceed? Can I flash another bootloader that will let me unlock from fastboot?
Bootloader can only be unlocked after allowing it in the developers options. Perhaps you can boot into TWRP from the bootloader, fastboot boot xxx. Where xxx is the name of the TWRP IMG. You may be able to side load the OTA that way and flash it. I'm not 100% sure of that though.
Larzzzz82 said:
Bootloader can only be unlocked after allowing it in the developers options. Perhaps you can boot into TWRP from the bootloader, fastboot boot xxx. Where xxx is the name of the TWRP IMG. You may be able to side load the OTA that way and flash it. I'm not 100% sure of that though.
Click to expand...
Click to collapse
How do I push TWRP to the device? I can't flash recovery (it's still stock).
You don't. If you've got fastboot working, just type, fastboot boot (the name of the TWRP IMG) and it should boot on the device.
Sent from my Nexus 6 using Tapatalk
Larzzzz82 said:
You don't. If you've got fastboot working, just type, fastboot boot (the name of the TWRP IMG) and it should boot on the device.
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
I was getting errors when trying to boot from the twrp image. But I figured out that I can boot to recovery, select update from adb, and get adb running again.
I was able to reflash the OTA, looks like it's working now.
I guess the lesson for today is that I should just leave the bootloader unlocked.
Thanks for the help
Excellent!
Sent from my Nexus 6 using Tapatalk
Javi_in_1080p said:
I was errors when trying to boot from the twrp image. But I figured out that I can boot to recovery, select update from adb, and get adb running again.
I was able to reflash the OTA, looks like it's working now.
I guess the lesson for today is that I should just leave the bootloader unlocked.
Thanks for the help
Click to expand...
Click to collapse
That's the 1st commandment! Leave the bootloader unlocked.
Sent from my Pixel XL using Tapatalk