Hi. I have note 5 sm-920c with multiBoot,AryaMod ROM installed as primary rom and DrKetan secondary. All well and fine since this morning when I tried an app that changes resolutions (I changed to 1080x1920 and things stared crashing: systemUI, AirView, etc). After rebooting there wasn't anything on the screen but the wallpaper. So I connected the phone to USB and ran a few ADB commands to restore the resolution. After restaring everything was back to normal. Then out of the blue my phone restarted by itself and went into a bootloop: showing the black screen with samsung galaxy note 5 (and the little red text kernel is not seandroid enforcing - because of the multiboot) and immediately restarting. It wouldn't even get to the bootanimation. So I entered recovery and first wiped cache and dalvik - same thing happened. Flashed multiboot cleaner - same thing happened.
So now I'm trying to do a full reset to install a new rom. And the phone restarts DURING the reset while being in recovery. That's what scares me - because I haven't seen anyphone do this (it's not my first flashing exp). It doesn't even go into bootloader, it just keeps restaring. Only thing that works in the custom recovery - CWM.
Do you think it's a hardware fault? Like the sdcard failing? Or just software. Should I keep on trying flashing something from the phone since the files are there and I can still access them? Can I flash anything from Odin without entering the bootloader?
I'm asking now because I think it's serious and I don't want to **** it up anymore than I already did. Warranty is a NOGO right now, I at least have to get it to stock recovery even if the knox bit is tripped.
Any help appreciated.
Related
So I'm trying to get my VZN Galaxy Tab back on its feet. After trying to get Gingerbread in it so I can use Netflix - and failing - I'm going through a lot of motions.
Okay. First I rooted it with Super One Click. I should have been happy with that, but noooo. Then I tried flashing GB on it (I wish I can remember which ROM I started with...it's a mess. I think the pit file was gt-p1000_mr? Does that sound right?).
When that didn't work, I went to the much-cross-posted procedure for returning it to stock using Heimdall and SCH-i800_VZW_stock. Tried it five times. Each time, it booted into the Galaxy Tab/Samsung logos, then a fast glimpse of scrambled letters for a second followed by twinkly music, then black nothingness. It would then bootloop. I attempted to boot into recovery to wipe data/cache, but I couldn't get there. Vol-Up/Pwr just brought up the logo and scrambled video again.
Since I was still able to get into download mode, I tried flashing another ROM...this one the "P1000XXJQ1_P1000XXJQ1_P1000XXJPZ" method. With this, I was able to also flash CWM so I have SOME recovery mode. Sadly, booting brings up the GT/SAMSUNG logos and I get the spacey animation, but after that, again - blackness. This time, however, the Menu/Home/Back/Search buttons light up, so something's happening in there.
Also, booting into CWM, I cannot get my sdcard to be recognized. I tried different cards, so there's something goofy with the slot itself, I'm guessing.
So nothing is really working, but since I can get into CWM and also download modes, I'm holding out hope that this is not completely bricked.
I just need to find the right method of getting it back to a functioning tablet. If anyone has any suggestions, I'm all eyes. Thanks so much.
UPDATE: I tried reflashing stock using the tried and true method. But this time, I went in and flashed CWM replacing the stock recovery which never worked for me. I got the Galaxy Tab/Samsung logo, and at long last, the animated VZW logo. Then it would bootloop there. I booted into CWM recovery and wiped the data/system and the cache from the first page. It still booted and bootlooped the same. This time, I booted into recovery, went to the mounts and storage section and formatted the system, data and cache. Opening logo only. CWM again, and got a whole bunch of "cache missing" messages. But I think I'm getting closer. Back to work.
UPDATE II: So the farthest I can get is the animated VZW logo using the combo of the stock flash through Heimdall, then flashing CWM with Odin. Still no sdcard access. Anything I should try here? Thanks.
same question here
Did anyone figure out how to restore Verizon tab?
I tried a flash and think i messed my tab...now its just a black screen with a faint light in the background like its on but its no images.......my battery icon pops up then distorts away and thats it ....can get into download mode but not recovery.....tried holding all 3 buttons got this lil android dude in the corner with a sign sayin something about power reset but cant select nothing......help me please......
Put it in d/l mode and flash one of the stock roms with Heimdall.
D
i tried a stock flash with heimdall it flashed successfully but i still get the SAMSUNG logo that flashes and go away,buttons light up at the bottom,can go in download mode but not reboot mode,phone stay on with a faint light ,so i assume that its on somehow.....help
Did you follow this exactly?
http://forum.xda-developers.com/showthread.php?t=967175
One thing I missed here before was to wipe data and cache. Otherwise I go into boot loop.
how to get recovery mode
i cant wipe nothing because i cant get to recovery,just download mode
done it step by step
i followed evrything it flashed successfully but when it rebooted i turned off.and tried recovery but nothing......
chubbyflood said:
i followed evrything it flashed successfully but when it rebooted i turned off.and tried recovery but nothing......
Click to expand...
Click to collapse
Use UnBrickable Mod
http://forum.xda-developers.com/showthread.php?t=1341753
Although you get a black screen on boot, it might still be working....
Chubbyflood,
If you are in the same situation as I am then the tab is still working, you are just getting black screen on boot up. It played tricks on me for ages when I was first rooting by tablet; but it turned out it is just the boot up screen that isn't showing.
This is my situation:
-Press and hold Power button to turn on.
-I see the Galaxy Tab / Samsung initial boot image for about 1 second, and also hear the "boot chime"
-Then the screen goes completely blank (but you can tell it is still on with a little light showing.
-The four "hard button" lights will light up briefly a couple times
-Wait approximately 30 seconds to a minute (to be safe and give the tablet time to boot up - it is actually booting up)
-Tab the Power button once, to turn the tablet off (now the screen is clearly off)
-Tab the Power button again, and the tablet will be up and running as normal.
I am guessing the boot animation / images are failing in some way, but the tablet is booting up as normal.
I've just learned to live with it, because I haven't had a chance to figure out what's going on, but it honestly took me a good hour or so, and a few (unnecessary) flashes, before I realized the thing was up and running fine, it just need to have the button pressed on and off.
One final thing to mention; don't have the tablet plugged into anything. I seem to remember leaving it plugged into the PC didn't help (I think).
Hope that makes sense.
Cheers
Ed.
Has your situation been resolved?
I am in the same boat. What I have done to temporarily fix this was to Flash a ROM that uses Hemdall and it will boot as flukebu stated but only with the Galaxy Cubed ROM.
I cannot get the factory files to boot as you have stated.
I have continually tried to return to stock using the files provided on this forum and all "unbrick" posts.
While flashing the stock images everything completes and works well. The device reboots and the Samsung Splash screen appears. Once it appears it disappears and scrambles the screen. I believe it then goes into a bootloop which easily enough I could access factory recovery to correct but when I do attempt to access factory recovery the screen is as posted above (black but illuminated).
Once I flashed Galaxy Cubed ROM and it booted I hit the power button and the locksreen appeared. I can tell you I was excited but there are some issues with that ROM I have not tried to correct yet because my main goal is to return to stock.
Even with this ROM working correctly I have attempted to access CWM once installed to complete a Data Wipe and that does not show up either.
I would really like to find a solution to this I want to return to stock and not have this custom ROM running.
Juiced_RL said:
Has your situation been resolved?
I am in the same boat. What I have done to temporarily fix this was to Flash a ROM that uses Hemdall and it will boot as flukebu stated but only with the Galaxy Cubed ROM.
I cannot get the factory files to boot as you have stated.
I have continually tried to return to stock using the files provided on this forum and all "unbrick" posts.
While flashing the stock images everything completes and works well. The device reboots and the Samsung Splash screen appears. Once it appears it disappears and scrambles the screen. I believe it then goes into a bootloop which easily enough I could access factory recovery to correct but when I do attempt to access factory recovery the screen is as posted above (black but illuminated).
Once I flashed Galaxy Cubed ROM and it booted I hit the power button and the locksreen appeared. I can tell you I was excited but there are some issues with that ROM I have not tried to correct yet because my main goal is to return to stock.
Even with this ROM working correctly I have attempted to access CWM once installed to complete a Data Wipe and that does not show up either.
I would really like to find a solution to this I want to return to stock and not have this custom ROM running.
Click to expand...
Click to collapse
Have you found a resolution to this? Mine tab is doing the exact same thing as yours after the cubed rom.
Droid 4 running Stock Jb 4.1.2, Safestrap 3.11, Liquid smooth 2.9, CM (last stable)
Everything working fine for a number of months, installed Liquid smooth via -> delete romslot 3, create romslot 3, install Liquid 2.8.
It ran for a number of days no problems. Restarted fine, all features worked great, even the annoying random restart from 2.4 went away.
6 - 10 days in, im surfin' the news sites at work, put it down, screen goes black, i pick it up. Hit the power button cause i realize its off and it just boot loops... so bad i had to vol-/+ pwr, go to flash mode and THEN turn it off b/c it just kept trying to restart, hang on logo.
I got home and decided to AP flash the latest:
9.8.2O-72_VZW-18-2
Blur_Version.98.72.182.XT894.Verizon.en.US for the maserati.
Boot looped a few times, i was able to get it to go into recovery mode, after that it loaded up the stock JB system. First boot it crashed and restarted, second boot it loaded but only the keyboard worked, not the touch screen. Went to the in OS option of factory reset mode + delete storage.
Rebooted, worked. Checked it a few boots, everything is fine. I use Druid 4 Utility Xt894 JB version and apply the root. Works great. Install safestrap, Create new partition, install liquid smooth 2.9. Works for an afternoon... at work today the touch screen stops responding, i restart it a few times. I try to enter recovery mode. Now im in boot loop again...
I've tried re flashing it again, a few times. I tried even going down to the previous release of JB for the phone. STILL 4.1.2!!!! But nothing.... it just boot loops... what did i do wrong? It was running great. No tweaks or anything done to it prior to it having its melt down.
Help please.. ive provided as much information as possible and though i only joined XDA now to post for help, i have read it for a long time as my main source for my phone and have donated to both CM and Liquidsmooth teams previously..
help!!!
I can't see where you are doing anything wrong. You have obviously done your research and have a good idea of what you are doing. I see, after you fastbooted, you went back to Liquid. I think I would try running CM10.1 or even stock for a few days and see if you have the issue there as well. If you do than it sounds to me like it might be a hardware issue. If not, maybe try re-downloading Liquid. Perhaps your zip got corrupted somehow.
I would love too. In fact i would be willing to run it on the stock crappy 4.1.2 if i could get it out of boot loop this time...
It just keeps boot looping on the logo. AP Fashboot flash and BP flash work but recovery and normal boot/reboot mode just goes into M logo boot loop.
I've re downloaded the 4.1.2 jb SBFs from 2 different sources to ensure its not a corrupt file, tried 18_1 and 18_2 software versions...
Is there a way to use the abd shell to get into the filesystem and check whats going on? Is the SBF the last call? or is there another route to see whats going on or just flash EVERYTHING? Like completely back to stock?
I can find my way around a PC file system but im not familiar with linux. Please help me understand, Is it like having CMOS and BIOS settings or equivalent to damaged CMOS firmware? What am i not replacing/reverting by SBF and HOW can i replace/revert BEYOND the basic sbf...
If ya point me in a direction or to someone who can help me out i can do all the foot work just point me in the right direction?
Is this applicable? I found a site talking about using CWM in a ADB shell file push to possibly get access to more features?
The article also goes into reading the busybox / ADB command screen? (sorry for not proper jargin) and see what its doing during the boot loop before it restarts?
Id add the link but i need more posts....
Update: Flashed 18_2 again with a "factory cable" i made, let it boot loop a series of times before it started up into the stock system again.
At first, again the touch screen wouldn't work, random lockups and restarts, etc. Since i just got it into the main system again and i had to leave for the weekend for a trip(no wifi or network), i couldn't mess with it all weekend but i left it on the whole time and kept checking its functionality... gradually its come back to full function. Touch screen works and is accurate, no more lockups, no more restarting, even stopped boot looping when i restart and enter recovery..
Im not sure and i couldn't find any forum converstations or write ups to support to idea but i think after a major crash and you flash new or reflash your SBF, it seems the phone needs time to recalibrate and index? Not sure, but just an FYI. Gonna try loading SS and liquid again.
Hello all. I have been in the Android root community for a little over three years, and even after tinkering with the various devices I've owned since, I cannot get my T599N to come out of its current bootloop.
A background: I had been checking some things in my settings app (running stock, rooted), and I ended up just force closing the settings app to get out of it quickly. Well, this action deleted all of my text messages, and later on it removed my notification bar and made my wallpaper go black. I ended up booting into recovery mode to try and clear the cache. After it cleared, I rebooted, and bam, the bootloop started.
Now, here's what's interesting. The phone is in a bootloop where it displays the first boot message (SGHT599N Galaxy Exhibit or whatever), and then it tries to boot into cwm recovery, displays the loading screen for that for 2 seconds, and just reboots again. I've tried installing a stock rom from ODIN with no success. The rom apparently loads onto the device but it's still in the bootloop. After this, I tried to install philz recovery to try to install a zipped rom to get the device to somehow boot. I tried to factory reset it for installing purposes, and it just reboots. The device will literally clear everything but /data, so that makes me think that it may be a file system problem. I really need to get it to work, as I am out of a phone right now.
Does anyone have any suggestions? I've tried everything I know.
My S6 edge is in a bootloop. I put off the 5.1.1 OTA for a while when my wifi would not turn on. Rebooted, still didnt work. I decided to do the update. installation went great but now its in a boot loop. I flashed the firmware (BOG7) using Odin. It worked. The phone was back on again but then it shut off after a few hours.
Its been stuck in the bootloop again. I flashed BOG7 again. Ive Flashed BOG9. Ive flashed the stock PIT. Ive tried ADB sideload. Smartswitch and Kies do not recognize the device. Of course, Ive wiped cache and factory reset. Attempted booting in safemode. All flashes were successful but when it reboots, It says "erasing" and goes to bootloop (Samsung powered by android).... Drivers are installed and working. MTP is not installed and I cant find the file.
Please .
same problem
I'm having the same problem with boot loop on g925v stock. I'm wondering if the op or anyone else can help!
No mater what I do, phone reboots after almost exactly 1min9 sec. Just enough time to select a language, but not get past the next "activation" screen.
Background: Phone has never been rooted, at first was on og5 and started freezing on the verizon logo, so I factory data reset, and after that nothing has really changed. knox has not been tripped, frp not tripped
First I tried flashing og5 with odin,
(of course checked md5, and odin=pass, then after flashing, I always tried several combinations of booting to recovery for wipe cache partition/ factory reset / and also power down by holding volume down and power button, then select boot in safe mode)
Then tried flashing og7, still boot loop
then tried flashing og9, 3 times, again, also many attempts of factory data reset/ wipe cache partition / safe mode.
I am starting to think this may be a hardware problem, BUT unfortunately I do not have samsung warranty available on this phone so I am pretty much stuck messing with it.
In researching the issue, I have run across quite a few similar freeze/boot loop problems all over the web, and never any real solutions, for both g925v, g920v, and other s6 models. I've also seen a stock s6 g920v that freezes randomly, flashing stock og9 never helped, owner was planning to replace the battery and see if that helps (I have not heard back).
I've tried looking at the boot log but I'm no expert. I know I can't downgrade, but I'm wondering if there is anything I can do with adb, or any other bootloaders that I could try flashing over the og9 (even if just temporarily, assuming I will flash stock og9 again after).
Thanks for any encouragement, help or advice.
I finally gave up on my GS6 Edge because upon carefully taking it apart for the 3rd time I noticed physical damage up by the wifi receiver and SIM card slot. My advice would be to try the things I tried (above) and, if it's not a hardware issue, it may fix the problem. Good luck.
beefriendly said:
I'm having the same problem with boot loop on g925v stock. I'm wondering if the op or anyone else can help!
No mater what I do, phone reboots after almost exactly 1min9 sec. Just enough time to select a language, but not get past the next "activation" screen.
Background: Phone has never been rooted, at first was on og5 and started freezing on the verizon logo, so I factory data reset, and after that nothing has really changed. knox has not been tripped, frp not tripped
First I tried flashing og5 with odin,
(of course checked md5, and odin=pass, then after flashing, I always tried several combinations of booting to recovery for wipe cache partition/ factory reset / and also power down by holding volume down and power button, then select boot in safe mode)
Then tried flashing og7, still boot loop
then tried flashing og9, 3 times, again, also many attempts of factory data reset/ wipe cache partition / safe mode.
I am starting to think this may be a hardware problem, BUT unfortunately I do not have samsung warranty available on this phone so I am pretty much stuck messing with it.
In researching the issue, I have run across quite a few similar freeze/boot loop problems all over the web, and never any real solutions, for both g925v, g920v, and other s6 models. I've also seen a stock s6 g920v that freezes randomly, flashing stock og9 never helped, owner was planning to replace the battery and see if that helps (I have not heard back).
I've tried looking at the boot log but I'm no expert. I know I can't downgrade, but I'm wondering if there is anything I can do with adb, or any other bootloaders that I could try flashing over the og9 (even if just temporarily, assuming I will flash stock og9 again after).
Thanks for any encouragement, help or advice.
Click to expand...
Click to collapse