Firstly sorry for my english and grammar...
recently my gf lil brother took her phone (Lg-l70 d320n) and downloaded shi** virus it started spaming lagging auto enbling wifi and downloading stuff. So i force factory resseted it (power ant vol down) hoping to fix it but after it booted, those apps ,,se** girls" ,,wifi booster" ,,Apus" ,,se**hot"' and etc. was root installed, so decided to reflash stock firmware and than all the problems started.
Found toturial of reflashing (here in xda) and followed the steps: instaled Lg drivers, downloaded D32010c_00.kdz (provided by imei code) then tried to enter recovery mode with (power ant vol upp) no luck... so anabled usb debbuging and used adb commands this time it rebooted in to recovery so continued the toturial and when tried to flash rom with ,,LG Flash Tool 2014" it checked 20% and told that device is not conected tried pressing retry. Tried few times to flash in every USB port of my laptop no luck, same error. Then tried to flash with ADB in recovery, but when phone enter recovery, ADB console cannot detect device... (win7 also tells ,,unknown device" tried to download newer version of drivers no luck... tried to update rom with recovery mode from sd card but it doesnt detect sd card :crying:
laads plz help me
Related
Hi all,
Understand this is a boring topic, but I am facing a problem on connecting my i9000 back to PC.
Problem was occured after I login to recovery mode, wipe the phone and clear the cache before applying JG1 (Russia version).. after the flash process completed and loaded the phone lock screen (after the animation), It keeps pop up error (in Russian)... cant be stop..
then I try to Odin3 it again, then I found that my phone no longer recognize by windows anymore...
I have re-installed the usb drive, but windows just not recognize the device as a USB Composite or ADB device.. so basically i cannot restart the phone as Download mode for Odin3..
do i force the device to read my external SD card instead of the internal one?
what driver i need to get it connect to windows? << -- I guess this is the option I can bring my phone back as normal (to re-Odin3)
I tried factory reset,,, but yes, it bring back the Russia version only..
Kindly advice.. much appreciated.
jsonseven said:
Hi all,
Understand this is a boring topic, but I am facing a problem on connecting my i9000 back to PC.
Problem was occured after I login to recovery mode, wipe the phone and clear the cache before applying JG1 (Russia version).. after the flash process completed and loaded the phone lock screen (after the animation), It keeps pop up error (in Russian)... cant be stop..
then I try to Odin3 it again, then I found that my phone no longer recognize by windows anymore...
I have re-installed the usb drive, but windows just not recognize the device as a USB Composite or ADB device.. so basically i cannot restart the phone as Download mode for Odin3..
do i force the device to read my external SD card instead of the internal one?
what driver i need to get it connect to windows? << -- I guess this is the option I can bring my phone back as normal (to re-Odin3)
I tried factory reset,,, but yes, it bring back the Russia version only..
Kindly advice.. much appreciated.
Click to expand...
Click to collapse
hmmm.. why not try to force unmount then format your internal SD card then reset to Factory default.
after doing so, update using the latest EURO firmware which is the JG5.. and just a reminder.. do use the pit version *512 and not the *513 or else you will have a temporary headache bro.
Hello fellow members,
Before you go and advice me to search the forums before posting; I did that and did not find any solution... Here's my horror story;
I own a Galaxy S (GT-i9000). A while ago I installed Tsunami X on it along with Semaphore. When my phone was booting up, I accidentally removed the battery and when I tried to turn it on, I got stuck on a bootloop. The phone does not go in the recovery mode, and when I put it on download mode it does not get recognized by the computer (used 3 different computers, all with Samsung drivers and Kies.) which means that I cannot use Odin to flash it with a different ROM...
I am in a desperate need of your help as I searched all the forum for answers and did not find any... Thank you in advance
AW: Bootloop, Can't go to recovery mode and device undetectable on Windows... Help?
Maybe the usb cabel is corrupt. Did you already tried anotherone?
Sent from my GT-I9300 using xda app-developers app
For getting into recovery, try the 3 button option (Power + Home + Volume Up). Press these 3 buttons till you see the kernal logo.
For boot loop, try re-installing the ROM with data/cache wipe.
For USB,
(i) re-install these drivers 64 bit | 32 bit and then
(ii) check cable
(iii) follow this link for exhaustive solution http://forum.xda-developers.com/showpost.php?p=27205737&postcount=4571
http://forum.xda-developers.com/showthread.php?p=35683353#post35683353
I too have the same problem:
- SGS wont be recognized by PC (tried 2 differnet laptops and also different usb cables, nothing worked)
- Tried Odin and Heimdall (both didn't recognize the device)
- tried to flash the broccoli-aokp ROM: aokpcb_galaxysmtd_r2.1-beta-20120610-1843
- when i try to go (by the 3-button-option) into the recovery menu the device boots, shows the normal Galaxy S screen and then instead of recovery the ROM itselve tires somehow to boot (i get the bootscreen from the ROM)
- Also tried to make it visual for Odin/Heimdall via zadig.exe, didn't work...now the driver won't even install
- even tried it via cmd and the adb command, also no devices attached
Alltogether: i cant falsh any ROM via Odin nor CMW
Is it bricked? (Never had a bricked phone and dont know how to recognize this)
Greets Vauvenal7
Vauvenal7 said:
I too have the same problem:
- SGS wont be recognized by PC (tried 2 differnet laptops and also different usb cables, nothing worked)
- Tried Odin and Heimdall (both didn't recognize the device)
- tried to flash the broccoli-aokp ROM: aokpcb_galaxysmtd_r2.1-beta-20120610-1843
- when i try to go (by the 3-button-option) into the recovery menu the device boots, shows the normal Galaxy S screen and then instead of recovery the ROM itselve tires somehow to boot (i get the bootscreen from the ROM)
- Also tried to make it visual for Odin/Heimdall via zadig.exe, didn't work...now the driver won't even install
- even tried it via cmd and the adb command, also no devices attached
Alltogether: i cant falsh any ROM via Odin nor CMW
Is it bricked? (Never had a bricked phone and dont know how to recognize this)
Greets Vauvenal7
Click to expand...
Click to collapse
Can you go to recovery mode??
Sent from my GT-I9001 using Tapatalk 2
maddy2384 said:
Can you go to recovery mode??
Sent from my GT-I9001 using Tapatalk 2
Click to expand...
Click to collapse
Nope, neither the 3-button combination works (i get the normal galaxy s start up screen, and then instead of getting the recover ui the ROM somehow tries to start and i get the bootscreen...and then the bootloop starts) nor through the adb commands in cmd (no device detected)
Greets Vauvenal7
Sent from my HTC Vision
I just hardbricked my S5830 while trying to install cwm.
Actually I tried to install cwm without rooting the phone, and when i checked after this the phone was not going to recovery even samsung default recovery was gone.
Now there was no way through phone to install cwm. So i tried to factory reset the phone. My bad luck, phone is not getting on now.
The problem I am facing now is I am not able to use odin as drivers are not recognising the phone. It always gives drivers malfunctioned error. Even for the adb drivers too.
Has anybody faced this issue?
It is going to download mode. But in pc it is not recognising the phone. I installed all the available drivers.. But still the same.
Thank you in advance.
sie4kor said:
I just hardbricked my S5830 while trying to install cwm.
Actually I tried to install cwm without rooting the phone, and when i checked after this the phone was not going to recovery even samsung default recovery was gone.
Now there was no way through phone to install cwm. So i tried to factory reset the phone. My bad luck, phone is not getting on now.
The problem I am facing now is I am not able to use odin as drivers are not recognising the phone. It always gives drivers malfunctioned error. Even for the adb drivers too.
Has anybody faced this issue?
It is going to download mode. But in pc it is not recognising the phone. I installed all the available drivers.. But still the same.
Thank you in advance.
Click to expand...
Click to collapse
Have a look in the rooting and troubleshooting threads.
If odin isn't recognising your phone then:
1/ drivers for "download-mode" not installed properly.
2/ phone is not actually in download-mode.
3/ usb cable or pc usb port is faulty.
Ri9000 said:
Have a look in the rooting and troubleshooting threads.
If odin isn't recognising your phone then:
1/ drivers for "download-mode" not installed properly.
2/ phone is not actually in download-mode.
3/ usb cable or pc usb port is faulty.
Click to expand...
Click to collapse
I am glad you replied.
I think the drivers for download mode has not installed properly.
I searched in rooting and trouble shooting, couldnt find the proper drivers which detects. Even i installed windows 7 as someone mentioned in some thread. Still nothing worked.
sie4kor said:
I am glad you replied.
I think the drivers for download mode has not installed properly.
I searched in rooting and trouble shooting, couldnt find the proper drivers which detects. Even i installed windows 7 as someone mentioned in some thread. Still nothing worked.
Click to expand...
Click to collapse
1/ All I can suggest is install drivers/ odin as administrator. Windows should detect running phone with "ding-dong" even in wrong mode.
2/ remove phone battery for 20 secs.
3/ replace battery.
4/ press and hold down home button, down-Volume & then press power for 4 secs, then release power.
5/ keep holding home and down-Volume (about 5 more secs) until screen flashes and "downloading" is displayed.
6/ release buttons, plug phone to pc, flash stock rom with odin.
Hello everybody, :cyclops:__ sorry for my bad English __ :cyclops:
I have a big problem in my huawei p9 after soft update, i leave it for a night to complete the process of download, is updated but stay reboot again and again, i tired to install another firmware but nothing happened :crying: :crying: , so i googled for howa to install firmware via pc, i found by adb fastboot, and i flashed, but (Developer options, Screen lock & password, Camera, torch ...) Not working, i downloaded many firmware nothing works fine, i don't have a Box to repair this big problem.
Any help please please, any tool to update from pc
:crying: :crying:
:crying:
:crying: :crying: :crying:
:crying:
:crying:
Been there before, but recovering it is rather easy, first of all you have to install TWRP, you can do this by connecting the USB to your phone and PC and holding volume down to get to the white download mode screen, next use ADB, put the TWRP image in the ADB folder and type this: "fastboot flash recovery <twrp image name>.img" (without the "") from there remove the USB cable and reboot holding power and volume up until the Huawei logo appears, boot into TWRP and connect the USB cable back again. On your PC download a firmware for the phone and use Huawei Update Extractor to unzip it, find UPDATE.APP and keep it on the desktop. With your phone connected to your PC make a folder on the phone named "dload" and copy the UPDATE.APP file into it.
Shut the phone down and disconnect the USB cable, next hold volume up, down and power (yes, all three) and the phone should automatically force install the firmware and it should be fine from then on.
Hope this helps.
gamr13 said:
Been there before, but recovering it is rather easy, first of all you have to install TWRP, you can do this by connecting the USB to your phone and PC and holding volume down to get to the white download mode screen, next use ADB, put the TWRP image in the ADB folder and type this: "fastboot flash recovery <twrp image name>.img" (without the "") from there remove the USB cable and reboot holding power and volume up until the Huawei logo appears, boot into TWRP and connect the USB cable back again. On your PC download a firmware for the phone and use Huawei Update Extractor to unzip it, find UPDATE.APP and keep it on the desktop. With your phone connected to your PC make a folder on the phone named "dload" and copy the UPDATE.APP file into it.
Shut the phone down and disconnect the USB cable, next hold volume up, down and power (yes, all three) and the phone should automatically force install the firmware and it should be fine from then on.
Hope this helps.
Click to expand...
Click to collapse
Nop a tried all of the solution, i flashed recovery,system,boot (.img) through adb fast boot, nothing works fine, after turning up the phone ( Bluetooth not working, camera not found, security& password not woking, i cant access to Developer options)...., I think i flashed a bad firmware
just signed up to try to fix this problem myself, never used a forum before haha but i was a idiot.
im hoping that im just being an idiot and putting the wrong update in the dload folder, but ive also tried to do all of the steps above. then tried to upload a custom rom but none of them seem to want to work either. been trying to fix this for the last 2 days with no luck.
Hello all.
I recently Rediscovered my P20 Pro/CLT-l09(c432)f and decided to try and flash a newer rom to it since for some reaoson it wasnt getting an update.
I used FirmFinder and HiSuiteProxy which didn't give me any warning. I set the rom 10.0.0.201 i think and flashed without errors, but then on boot it started showing the message attached bellow. The problem is that it wont boot and i've tried using erecovery and everything. It can connect in fastboot mode but it wont accept any flashing. I believe the reason for that is that usb debugging isn't enabled and there is no way to do so as far as i've found.
I've tried the vol up+ power button menu where it gives the option to restore trough usb and otg but it always fails. I dont know if its becuse the rom i've downloaded isn't correctly placed inside the flash, but from i vid i found where i followed it should be.
Any help would be appriciated.